Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 542 insertions, 0 deletions

diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c
new file mode 100644
index 000000000..d3a23b1c2
--- /dev/null
+++ b/drivers/spi/spi-hisi-sfc-v3xx.c
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// HiSilicon SPI NOR V3XX Flash Controller Driver for hi16xx chipsets
+//
+// Copyright (c) 2019 HiSilicon Technologies Co., Ltd.
+// Author: John Garry <john.garry@huawei.com>
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/dmi.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#define HISI_SFC_V3XX_VERSION (0x1f8)
+
+#define HISI_SFC_V3XX_GLB_CFG (0x100)
+#define HISI_SFC_V3XX_GLB_CFG_CS0_ADDR_MODE BIT(2)
+#define HISI_SFC_V3XX_RAW_INT_STAT (0x120)
+#define HISI_SFC_V3XX_INT_STAT (0x124)
+#define HISI_SFC_V3XX_INT_MASK (0x128)
+#define HISI_SFC_V3XX_INT_CLR (0x12c)
+#define HISI_SFC_V3XX_CMD_CFG (0x300)
+#define HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF 9
+#define HISI_SFC_V3XX_CMD_CFG_RW_MSK BIT(8)
+#define HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK BIT(7)
+#define HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF 4
+#define HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK BIT(3)
+#define HISI_SFC_V3XX_CMD_CFG_CS_SEL_OFF 1
+#define HISI_SFC_V3XX_CMD_CFG_START_MSK BIT(0)
+#define HISI_SFC_V3XX_CMD_INS (0x308)
+#define HISI_SFC_V3XX_CMD_ADDR (0x30c)
+#define HISI_SFC_V3XX_CMD_DATABUF0 (0x400)
+
+/* Common definition of interrupt bit masks */
+#define HISI_SFC_V3XX_INT_MASK_ALL (0x1ff)	/* all the masks */
+#define HISI_SFC_V3XX_INT_MASK_CPLT BIT(0)	/* command execution complete */
+#define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2)	/* page progrom error */
+#define HISI_SFC_V3XX_INT_MASK_IACCES BIT(5)	/* error visiting inaccessible/
+						 * protected address
+						 */
+
+/* IO Mode definition in HISI_SFC_V3XX_CMD_CFG */
+#define HISI_SFC_V3XX_STD (0 << 17)
+#define HISI_SFC_V3XX_DIDO (1 << 17)
+#define HISI_SFC_V3XX_DIO (2 << 17)
+#define HISI_SFC_V3XX_FULL_DIO (3 << 17)
+#define HISI_SFC_V3XX_QIQO (5 << 17)
+#define HISI_SFC_V3XX_QIO (6 << 17)
+#define HISI_SFC_V3XX_FULL_QIO (7 << 17)
+
+/*
+ * The IO modes lookup table. hisi_sfc_v3xx_io_modes[(z - 1) / 2][y / 2][x / 2]
+ * stands for x-y-z mode, as described in SFDP terminology. -EIO indicates
+ * an invalid mode.
+ */
+static const int hisi_sfc_v3xx_io_modes[2][3][3] = {
+	{
+		{ HISI_SFC_V3XX_DIDO, HISI_SFC_V3XX_DIDO, HISI_SFC_V3XX_DIDO },
+		{ HISI_SFC_V3XX_DIO, HISI_SFC_V3XX_FULL_DIO, -EIO },
+		{ -EIO, -EIO, -EIO },
+	},
+	{
+		{ HISI_SFC_V3XX_QIQO, HISI_SFC_V3XX_QIQO, HISI_SFC_V3XX_QIQO },
+		{ -EIO, -EIO, -EIO },
+		{ HISI_SFC_V3XX_QIO, -EIO, HISI_SFC_V3XX_FULL_QIO },
+	},
+};
+
+struct hisi_sfc_v3xx_host {
+	struct device *dev;
+	void __iomem *regbase;
+	int max_cmd_dword;
+	struct completion *completion;
+	u8 address_mode;
+	int irq;
+};
+
+static void hisi_sfc_v3xx_disable_int(struct hisi_sfc_v3xx_host *host)
+{
+	writel(0, host->regbase + HISI_SFC_V3XX_INT_MASK);
+}
+
+static void hisi_sfc_v3xx_enable_int(struct hisi_sfc_v3xx_host *host)
+{
+	writel(HISI_SFC_V3XX_INT_MASK_ALL, host->regbase + HISI_SFC_V3XX_INT_MASK);
+}
+
+static void hisi_sfc_v3xx_clear_int(struct hisi_sfc_v3xx_host *host)
+{
+	writel(HISI_SFC_V3XX_INT_MASK_ALL, host->regbase + HISI_SFC_V3XX_INT_CLR);
+}
+
+/*
+ * The interrupt status register indicates whether an error occurs
+ * after per operation. Check it, and clear the interrupts for
+ * next time judgement.
+ */
+static int hisi_sfc_v3xx_handle_completion(struct hisi_sfc_v3xx_host *host)
+{
+	u32 reg;
+
+	reg = readl(host->regbase + HISI_SFC_V3XX_RAW_INT_STAT);
+	hisi_sfc_v3xx_clear_int(host);
+
+	if (reg & HISI_SFC_V3XX_INT_MASK_IACCES) {
+		dev_err(host->dev, "fail to access protected address\n");
+		return -EIO;
+	}
+
+	if (reg & HISI_SFC_V3XX_INT_MASK_PP_ERR) {
+		dev_err(host->dev, "page program operation failed\n");
+		return -EIO;
+	}
+
+	/*
+	 * The other bits of the interrupt registers is not currently
+	 * used and probably not be triggered in this driver. When it
+	 * happens, we regard it as an unsupported error here.
+	 */
+	if (!(reg & HISI_SFC_V3XX_INT_MASK_CPLT)) {
+		dev_err(host->dev, "unsupported error occurred, status=0x%x\n", reg);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+#define HISI_SFC_V3XX_WAIT_TIMEOUT_US		1000000
+#define HISI_SFC_V3XX_WAIT_POLL_INTERVAL_US	10
+
+static int hisi_sfc_v3xx_wait_cmd_idle(struct hisi_sfc_v3xx_host *host)
+{
+	u32 reg;
+
+	return readl_poll_timeout(host->regbase + HISI_SFC_V3XX_CMD_CFG, reg,
+				  !(reg & HISI_SFC_V3XX_CMD_CFG_START_MSK),
+				  HISI_SFC_V3XX_WAIT_POLL_INTERVAL_US,
+				  HISI_SFC_V3XX_WAIT_TIMEOUT_US);
+}
+
+static int hisi_sfc_v3xx_adjust_op_size(struct spi_mem *mem,
+					struct spi_mem_op *op)
+{
+	struct spi_device *spi = mem->spi;
+	struct hisi_sfc_v3xx_host *host;
+	uintptr_t addr = (uintptr_t)op->data.buf.in;
+	int max_byte_count;
+
+	host = spi_controller_get_devdata(spi->master);
+
+	max_byte_count = host->max_cmd_dword * 4;
+
+	if (!IS_ALIGNED(addr, 4) && op->data.nbytes >= 4)
+		op->data.nbytes = 4 - (addr % 4);
+	else if (op->data.nbytes > max_byte_count)
+		op->data.nbytes = max_byte_count;
+
+	return 0;
+}
+
+/*
+ * The controller only supports Standard SPI mode, Duall mode and
+ * Quad mode. Double sanitize the ops here to avoid OOB access.
+ */
+static bool hisi_sfc_v3xx_supports_op(struct spi_mem *mem,
+				      const struct spi_mem_op *op)
+{
+	struct spi_device *spi = mem->spi;
+	struct hisi_sfc_v3xx_host *host;
+
+	host = spi_controller_get_devdata(spi->master);
+
+	if (op->data.buswidth > 4 || op->dummy.buswidth > 4 ||
+	    op->addr.buswidth > 4 || op->cmd.buswidth > 4)
+		return false;
+
+	if (op->addr.nbytes != host->address_mode && op->addr.nbytes)
+		return false;
+
+	return spi_mem_default_supports_op(mem, op);
+}
+
+/*
+ * memcpy_{to,from}io doesn't gurantee 32b accesses - which we require for the
+ * DATABUF registers -so use __io{read,write}32_copy when possible. For
+ * trailing bytes, copy them byte-by-byte from the DATABUF register, as we
+ * can't clobber outside the source/dest buffer.
+ *
+ * For efficient data read/write, we try to put any start 32b unaligned data
+ * into a separate transaction in hisi_sfc_v3xx_adjust_op_size().
+ */
+static void hisi_sfc_v3xx_read_databuf(struct hisi_sfc_v3xx_host *host,
+				       u8 *to, unsigned int len)
+{
+	void __iomem *from;
+	int i;
+
+	from = host->regbase + HISI_SFC_V3XX_CMD_DATABUF0;
+
+	if (IS_ALIGNED((uintptr_t)to, 4)) {
+		int words = len / 4;
+
+		__ioread32_copy(to, from, words);
+
+		len -= words * 4;
+		if (len) {
+			u32 val;
+
+			to += words * 4;
+			from += words * 4;
+
+			val = __raw_readl(from);
+
+			for (i = 0; i < len; i++, val >>= 8, to++)
+				*to = (u8)val;
+		}
+	} else {
+		for (i = 0; i < DIV_ROUND_UP(len, 4); i++, from += 4) {
+			u32 val = __raw_readl(from);
+			int j;
+
+			for (j = 0; j < 4 && (j + (i * 4) < len);
+			     to++, val >>= 8, j++)
+				*to = (u8)val;
+		}
+	}
+}
+
+static void hisi_sfc_v3xx_write_databuf(struct hisi_sfc_v3xx_host *host,
+					const u8 *from, unsigned int len)
+{
+	void __iomem *to;
+	int i;
+
+	to = host->regbase + HISI_SFC_V3XX_CMD_DATABUF0;
+
+	if (IS_ALIGNED((uintptr_t)from, 4)) {
+		int words = len / 4;
+
+		__iowrite32_copy(to, from, words);
+
+		len -= words * 4;
+		if (len) {
+			u32 val = 0;
+
+			to += words * 4;
+			from += words * 4;
+
+			for (i = 0; i < len; i++, from++)
+				val |= *from << i * 8;
+			__raw_writel(val, to);
+		}
+
+	} else {
+		for (i = 0; i < DIV_ROUND_UP(len, 4); i++, to += 4) {
+			u32 val = 0;
+			int j;
+
+			for (j = 0; j < 4 && (j + (i * 4) < len);
+			     from++, j++)
+				val |= *from << j * 8;
+			__raw_writel(val, to);
+		}
+	}
+}
+
+static int hisi_sfc_v3xx_start_bus(struct hisi_sfc_v3xx_host *host,
+				   const struct spi_mem_op *op,
+				   u8 chip_select)
+{
+	int len = op->data.nbytes, buswidth_mode;
+	u32 config = 0;
+
+	if (op->addr.nbytes)
+		config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK;
+
+	if (op->data.buswidth == 0 || op->data.buswidth == 1) {
+		buswidth_mode = HISI_SFC_V3XX_STD;
+	} else {
+		int data_idx, addr_idx, cmd_idx;
+
+		data_idx = (op->data.buswidth - 1) / 2;
+		addr_idx = op->addr.buswidth / 2;
+		cmd_idx = op->cmd.buswidth / 2;
+		buswidth_mode = hisi_sfc_v3xx_io_modes[data_idx][addr_idx][cmd_idx];
+	}
+	if (buswidth_mode < 0)
+		return buswidth_mode;
+	config |= buswidth_mode;
+
+	if (op->data.dir != SPI_MEM_NO_DATA) {
+		config |= (len - 1) << HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF;
+		config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK;
+	}
+
+	if (op->data.dir == SPI_MEM_DATA_IN)
+		config |= HISI_SFC_V3XX_CMD_CFG_RW_MSK;
+
+	config |= op->dummy.nbytes << HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF |
+		  chip_select << HISI_SFC_V3XX_CMD_CFG_CS_SEL_OFF |
+		  HISI_SFC_V3XX_CMD_CFG_START_MSK;
+
+	writel(op->addr.val, host->regbase + HISI_SFC_V3XX_CMD_ADDR);
+	writel(op->cmd.opcode, host->regbase + HISI_SFC_V3XX_CMD_INS);
+
+	writel(config, host->regbase + HISI_SFC_V3XX_CMD_CFG);
+
+	return 0;
+}
+
+static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
+					 const struct spi_mem_op *op,
+					 u8 chip_select)
+{
+	DECLARE_COMPLETION_ONSTACK(done);
+	int ret;
+
+	if (host->irq) {
+		host->completion = &done;
+		hisi_sfc_v3xx_enable_int(host);
+	}
+
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		hisi_sfc_v3xx_write_databuf(host, op->data.buf.out, op->data.nbytes);
+
+	ret = hisi_sfc_v3xx_start_bus(host, op, chip_select);
+	if (ret)
+		return ret;
+
+	if (host->irq) {
+		ret = wait_for_completion_timeout(host->completion,
+						  usecs_to_jiffies(HISI_SFC_V3XX_WAIT_TIMEOUT_US));
+		if (!ret)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
+
+		hisi_sfc_v3xx_disable_int(host);
+		synchronize_irq(host->irq);
+		host->completion = NULL;
+	} else {
+		ret = hisi_sfc_v3xx_wait_cmd_idle(host);
+	}
+	if (hisi_sfc_v3xx_handle_completion(host) || ret)
+		return -EIO;
+
+	if (op->data.dir == SPI_MEM_DATA_IN)
+		hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, op->data.nbytes);
+
+	return 0;
+}
+
+static int hisi_sfc_v3xx_exec_op(struct spi_mem *mem,
+				 const struct spi_mem_op *op)
+{
+	struct hisi_sfc_v3xx_host *host;
+	struct spi_device *spi = mem->spi;
+	u8 chip_select = spi->chip_select;
+
+	host = spi_controller_get_devdata(spi->master);
+
+	return hisi_sfc_v3xx_generic_exec_op(host, op, chip_select);
+}
+
+static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = {
+	.adjust_op_size = hisi_sfc_v3xx_adjust_op_size,
+	.supports_op = hisi_sfc_v3xx_supports_op,
+	.exec_op = hisi_sfc_v3xx_exec_op,
+};
+
+static irqreturn_t hisi_sfc_v3xx_isr(int irq, void *data)
+{
+	struct hisi_sfc_v3xx_host *host = data;
+
+	hisi_sfc_v3xx_disable_int(host);
+
+	complete(host->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int hisi_sfc_v3xx_buswidth_override_bits;
+
+/*
+ * ACPI FW does not allow us to currently set the device buswidth, so quirk it
+ * depending on the board.
+ */
+static int __init hisi_sfc_v3xx_dmi_quirk(const struct dmi_system_id *d)
+{
+	hisi_sfc_v3xx_buswidth_override_bits = SPI_RX_QUAD | SPI_TX_QUAD;
+
+	return 0;
+}
+
+static const struct dmi_system_id hisi_sfc_v3xx_dmi_quirk_table[]  = {
+	{
+	.callback = hisi_sfc_v3xx_dmi_quirk,
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "D06"),
+	},
+	},
+	{
+	.callback = hisi_sfc_v3xx_dmi_quirk,
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 2280 V2"),
+	},
+	},
+	{
+	.callback = hisi_sfc_v3xx_dmi_quirk,
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 200 (Model 2280)"),
+	},
+	},
+	{}
+};
+
+static int hisi_sfc_v3xx_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hisi_sfc_v3xx_host *host;
+	struct spi_controller *ctlr;
+	u32 version, glb_config;
+	int ret;
+
+	ctlr = spi_alloc_master(&pdev->dev, sizeof(*host));
+	if (!ctlr)
+		return -ENOMEM;
+
+	ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD |
+			  SPI_TX_DUAL | SPI_TX_QUAD;
+
+	ctlr->buswidth_override_bits = hisi_sfc_v3xx_buswidth_override_bits;
+
+	host = spi_controller_get_devdata(ctlr);
+	host->dev = dev;
+
+	platform_set_drvdata(pdev, host);
+
+	host->regbase = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(host->regbase)) {
+		ret = PTR_ERR(host->regbase);
+		goto err_put_master;
+	}
+
+	host->irq = platform_get_irq_optional(pdev, 0);
+	if (host->irq == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_put_master;
+	}
+
+	hisi_sfc_v3xx_disable_int(host);
+
+	if (host->irq > 0) {
+		ret = devm_request_irq(dev, host->irq, hisi_sfc_v3xx_isr, 0,
+				       "hisi-sfc-v3xx", host);
+
+		if (ret) {
+			dev_err(dev, "failed to request irq%d, ret = %d\n", host->irq, ret);
+			host->irq = 0;
+		}
+	} else {
+		host->irq = 0;
+	}
+
+	ctlr->bus_num = -1;
+	ctlr->num_chipselect = 1;
+	ctlr->mem_ops = &hisi_sfc_v3xx_mem_ops;
+
+	/*
+	 * The address mode of the controller is either 3 or 4,
+	 * which is indicated by the address mode bit in
+	 * the global config register. The register is read only
+	 * for the OS driver.
+	 */
+	glb_config = readl(host->regbase + HISI_SFC_V3XX_GLB_CFG);
+	if (glb_config & HISI_SFC_V3XX_GLB_CFG_CS0_ADDR_MODE)
+		host->address_mode = 4;
+	else
+		host->address_mode = 3;
+
+	version = readl(host->regbase + HISI_SFC_V3XX_VERSION);
+
+	if (version >= 0x351)
+		host->max_cmd_dword = 64;
+	else
+		host->max_cmd_dword = 16;
+
+	ret = devm_spi_register_controller(dev, ctlr);
+	if (ret)
+		goto err_put_master;
+
+	dev_info(&pdev->dev, "hw version 0x%x, %s mode.\n",
+		 version, host->irq ? "irq" : "polling");
+
+	return 0;
+
+err_put_master:
+	spi_master_put(ctlr);
+	return ret;
+}
+
+static const struct acpi_device_id hisi_sfc_v3xx_acpi_ids[] = {
+	{"HISI0341", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, hisi_sfc_v3xx_acpi_ids);
+
+static struct platform_driver hisi_sfc_v3xx_spi_driver = {
+	.driver = {
+		.name	= "hisi-sfc-v3xx",
+		.acpi_match_table = hisi_sfc_v3xx_acpi_ids,
+	},
+	.probe	= hisi_sfc_v3xx_probe,
+};
+
+static int __init hisi_sfc_v3xx_spi_init(void)
+{
+	dmi_check_system(hisi_sfc_v3xx_dmi_quirk_table);
+
+	return platform_driver_register(&hisi_sfc_v3xx_spi_driver);
+}
+
+static void __exit hisi_sfc_v3xx_spi_exit(void)
+{
+	platform_driver_unregister(&hisi_sfc_v3xx_spi_driver);
+}
+
+module_init(hisi_sfc_v3xx_spi_init);
+module_exit(hisi_sfc_v3xx_spi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HiSilicon SPI NOR V3XX Flash Controller Driver for hi16xx chipsets");