Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 313 insertions, 0 deletions

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
new file mode 100644
index 000000000..9367c12c7
--- /dev/null
+++ b/drivers/usb/misc/Kconfig
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Miscellaneous driver configuration
+#
+comment "USB Miscellaneous drivers"
+
+config USB_EMI62
+	tristate "EMI 6|2m USB Audio interface support"
+	help
+	  This driver loads firmware to Emagic EMI 6|2m low latency USB
+	  Audio and Midi interface.
+
+	  After firmware load the device is handled with standard linux
+	  USB Audio driver.
+
+	  This code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called audio. If you want to compile it as a
+	  module, say M here and read <file:Documentation/kbuild/modules.rst>.
+
+config USB_EMI26
+	tristate "EMI 2|6 USB Audio interface support"
+	help
+	  This driver loads firmware to Emagic EMI 2|6 low latency USB
+	  Audio interface.
+
+	  After firmware load the device is handled with standard linux
+	  USB Audio driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called emi26.
+
+config USB_ADUTUX
+	tristate "ADU devices from Ontrak Control Systems"
+	help
+	  Say Y if you want to use an ADU device from Ontrak Control
+	  Systems.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called adutux.
+
+config USB_SEVSEG
+	tristate "USB 7-Segment LED Display"
+	help
+	  Say Y here if you have a USB 7-Segment Display by Delcom
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbsevseg.
+
+config USB_LEGOTOWER
+	tristate "USB Lego Infrared Tower support"
+	help
+	  Say Y here if you want to connect a USB Lego Infrared Tower to your
+	  computer's USB port.
+
+	  This code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called legousbtower. If you want to compile it as
+	  a module, say M here and read
+	  <file:Documentation/kbuild/modules.rst>.
+
+config USB_LCD
+	tristate "USB LCD driver support"
+	help
+	  Say Y here if you want to connect an USBLCD to your computer's
+	  USB port. The USBLCD is a small USB interface board for
+	  alphanumeric LCD modules. See <http://www.usblcd.de/> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usblcd.
+
+config USB_CYPRESS_CY7C63
+	tristate "Cypress CY7C63xxx USB driver support"
+	help
+	  Say Y here if you want to connect a Cypress CY7C63xxx
+	  micro controller to your computer's USB port. Currently this
+	  driver supports the pre-programmed devices (incl. firmware)
+	  by AK Modul-Bus Computer GmbH.
+
+	  Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cypress_cy7c63.
+
+config USB_CYTHERM
+	tristate "Cypress USB thermometer driver support"
+	help
+	  Say Y here if you want to connect a Cypress USB thermometer
+	  device to your computer's USB port. This device is also known
+	  as the Cypress USB Starter kit or demo board. The Elektor
+	  magazine published a modified version of this device in issue 
+	  #291.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cytherm.
+
+config USB_IDMOUSE
+	tristate "Siemens ID USB Mouse Fingerprint sensor support"
+	help
+	  Say Y here if you want to use the fingerprint sensor on
+	  the Siemens ID Mouse. There is also a Siemens ID Mouse
+	  _Professional_, which has not been tested with this driver,
+	  but uses the same sensor and may therefore work.
+
+	  This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
+	  which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
+
+	  See also <https://www.fs.tum.de/~echtler/idmouse/>.
+
+config USB_FTDI_ELAN
+	tristate "Elan PCMCIA CardBus Adapter USB Client"
+	help
+	  ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
+	  Currently only the U132 adapter is available.
+
+	  The U132 is specifically designed for CardBus PC cards that contain
+	  an OHCI host controller. Typical PC cards are the Orange Mobile 3G
+	  Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
+	  with PC cards that do not contain an OHCI controller. To use a U132
+	  adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
+	  module which is a USB host controller driver that talks to the OHCI
+	  controller within CardBus card that are inserted in the U132 adapter.
+
+	  This driver has been tested with a CardBus OHCI USB adapter, and
+	  worked with a USB PEN Drive inserted into the first USB port of
+	  the PCCARD. A rather pointless thing to do, but useful for testing.
+
+	  See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
+
+	  It is safe to say M here.
+
+config USB_APPLEDISPLAY
+	tristate "Apple Cinema Display support"
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to control the backlight of Apple Cinema
+	  Displays over USB. This driver provides a sysfs interface.
+
+config USB_QCOM_EUD
+	tristate "QCOM Embedded USB Debugger(EUD) Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	select USB_ROLE_SWITCH
+	help
+	  This module enables support for Qualcomm Technologies, Inc.
+	  Embedded USB Debugger (EUD). The EUD is a control peripheral
+	  which reports VBUS attach/detach events and has USB-based
+	  debug and trace capabilities. On selecting m, the module name
+	  that is built is qcom_eud.ko
+
+config APPLE_MFI_FASTCHARGE
+	tristate "Fast charge control for iOS devices"
+	select POWER_SUPPLY
+	help
+	  Say Y here if you want to control whether iOS devices will
+	  fast charge from the USB interface, as implemented in "MFi"
+	  chargers.
+
+	  It is safe to say M here.
+
+source "drivers/usb/misc/sisusbvga/Kconfig"
+
+config USB_LD
+	tristate "USB LD driver"
+	help
+	  This driver is for generic USB devices that use interrupt transfers,
+	  like LD Didactic's USB devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ldusb.
+
+config USB_TRANCEVIBRATOR
+	tristate "PlayStation 2 Trance Vibrator driver support"
+	help
+	  Say Y here if you want to connect a PlayStation 2 Trance Vibrator
+	  device to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called trancevibrator.
+
+config USB_IOWARRIOR
+	tristate "IO Warrior driver support"
+	help
+	  Say Y here if you want to support the IO Warrior devices from Code
+	  Mercenaries.  This includes support for the following devices:
+	  	IO Warrior 40
+		IO Warrior 24
+		IO Warrior 56
+		IO Warrior 24 Power Vampire
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iowarrior.
+
+config USB_TEST
+	tristate "USB testing driver"
+	help
+	  This driver is for testing host controller software.  It is used
+	  with specialized device firmware for regression and stress testing,
+	  to help prevent problems from cropping up with "real" drivers.
+
+	  See <http://www.linux-usb.org/usbtest/> for more information,
+	  including sample test device firmware and "how to use it".
+
+config USB_EHSET_TEST_FIXTURE
+	tristate "USB EHSET Test Fixture driver"
+	help
+	  Say Y here if you want to support the special test fixture device
+	  used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
+
+	  When the test fixture is connected, it can enumerate as one of several
+	  VID/PID pairs. This driver then initiates a corresponding test mode on
+	  the downstream port to which the test fixture is attached.
+
+	  See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
+	  information.
+
+config USB_ISIGHTFW
+	tristate "iSight firmware loading support"
+	select FW_LOADER
+	help
+	  This driver loads firmware for USB Apple iSight cameras, allowing
+	  them to be driven by the USB video class driver available at
+	  http://linux-uvc.berlios.de
+
+	  The firmware for this driver must be extracted from the MacOS
+	  driver beforehand. Tools for doing so are available at
+	  http://bersace03.free.fr
+
+config USB_YUREX
+	tristate "USB YUREX driver support"
+	help
+	  Say Y here if you want to connect a YUREX to your computer's
+	  USB port. The YUREX is a leg-shakes sensor. See
+	  <http://bbu.kayac.com/en/> for further information.
+	  This driver supports read/write of leg-shakes counter and
+	  fasync for the counter update via a device file /dev/yurex*.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called yurex.
+
+config USB_EZUSB_FX2
+	tristate "Functions for loading firmware on EZUSB chips"
+	help
+	  Say Y here if you need EZUSB device support.
+	  (Cypress FX/FX2/FX2LP microcontrollers)
+
+config USB_HUB_USB251XB
+	tristate "USB251XB Hub Controller Configuration Driver"
+	depends on I2C
+	help
+	  This option enables support for configuration via SMBus of the
+	  Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
+	  parameters may be set in devicetree or platform data.
+	  Say Y or M here if you need to configure such a device via SMBus.
+
+config USB_HSIC_USB3503
+	tristate "USB3503 HSIC to USB20 Driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+
+config USB_HSIC_USB4604
+	tristate "USB4604 HSIC to USB20 Driver"
+	depends on I2C
+	help
+	  This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+
+config USB_LINK_LAYER_TEST
+	tristate "USB Link Layer Test driver"
+	help
+	  This driver is for generating specific traffic for Super Speed Link
+	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
+	  Link Layer Test for host controllers.
+
+config USB_CHAOSKEY
+	tristate "ChaosKey random number generator driver support"
+	depends on HW_RANDOM
+	help
+	  Say Y here if you want to connect an AltusMetrum ChaosKey or
+	  Araneus Alea I to your computer's USB port. These devices
+	  are hardware random number generators which hook into the
+	  kernel entropy pool to ensure a large supply of entropy for
+	  /dev/random and /dev/urandom and also provides direct access
+	  via /dev/chaoskeyX
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chaoskey.
+
+config BRCM_USB_PINMAP
+	tristate "Broadcom pinmap driver support"
+	depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
+	default ARCH_BRCMSTB && PHY_BRCM_USB
+	help
+	  This option enables support for remapping some USB external
+	  signals, which are typically on dedicated pins on the chip,
+	  to any gpio.
+
+config USB_ONBOARD_HUB
+	tristate "Onboard USB hub support"
+	depends on OF || COMPILE_TEST
+	help
+	  Say Y here if you want to support discrete onboard USB hubs that
+	  don't require an additional control bus for initialization, but
+	  need some non-trivial form of initialization, such as enabling a
+	  power regulator. An example for such a hub is the Realtek
+	  RTS5411.
+
+	  This driver can be used as a module but its state (module vs
+	  builtin) must match the state of the USB subsystem. Enabling
+	  this config will enable the driver and it will automatically
+	  match the state of the USB subsystem. If this driver is a
+	  module it will be called onboard_usb_hub.