Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 199 insertions, 0 deletions

diff --git a/drivers/usb/serial/keyspan_usa90msg.h b/drivers/usb/serial/keyspan_usa90msg.h
new file mode 100644
index 000000000..c4ca0f631
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa90msg.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+	usa90msg.h
+
+	Copyright (c) 1998-2003 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Message Formats for the USA19HS
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (c) 1998-2003 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. The name of InnoSys Incorporated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.    
+
+	Revisions:
+
+	2003feb14		add setTxMode/txMode  and cancelRxXoff to portControl
+	2003mar21		change name of PARITY_0/1 to add MARK/SPACE
+*/
+
+#ifndef	__USA90MSG__
+#define	__USA90MSG__
+
+struct keyspan_usa90_portControlMessage
+{
+	/*
+		there are three types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the device):
+	*/
+
+	u8	setClocking,	// host requests baud rate be set
+		baudLo,			// host does baud divisor calculation
+		baudHi,			// host does baud divisor calculation 
+		
+		setLcr,			// host requests lcr be set
+		lcr,			// use PARITY, STOPBITS, DATABITS below
+		
+		setRxMode,		// set receive mode
+		rxMode,			// RXMODE_DMA or RXMODE_BYHAND
+
+		setTxMode,		// set transmit mode
+		txMode,			// TXMODE_DMA or TXMODE_BYHAND
+
+		setTxFlowControl,	// host requests tx flow control be set
+		txFlowControl	,	// use TX_FLOW... bits below
+		setRxFlowControl,	// host requests rx flow control be set
+		rxFlowControl,	// use RX_FLOW... bits below
+		sendXoff,		// host requests XOFF transmitted immediately
+		sendXon,		// host requests XON char transmitted
+		xonChar,		// specified in current character format
+		xoffChar,		// specified in current character format
+
+		sendChar,		// host requests char transmitted immediately
+		txChar,			// character to send
+
+		setRts,			// host requests RTS output be set
+		rts,			// 1=on, 0=off
+		setDtr, 		// host requests DTR output be set
+		dtr;			// 1=on, 0=off
+
+	
+	/*
+		2.	configuration data which is simply used as is 
+			and must be specified correctly in every host message.
+	*/
+
+	u8	rxForwardingLength,  // forward when this number of chars available
+		rxForwardingTimeout, // (1-31 in ms)
+		txAckSetting;	   // 0=don't ack, 1=normal, 2-255 TBD...
+	/*
+		3.	Firmware states which cause actions if they change					
+		and must be specified correctly in every host message.
+	*/
+
+	u8	portEnabled,	// 0=disabled, 1=enabled
+		txFlush,		// 0=normal, 1=toss outbound data
+		txBreak,		// 0=break off, 1=break on
+		loopbackMode;	// 0=no loopback, 1=loopback enabled
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if rxFlush and rxForward flags are set, the
+			port will have no data to forward); any non-zero value 
+			is respected
+	*/
+
+	u8	rxFlush,		// toss inbound data
+		rxForward,		// forward all inbound data, NOW (as if fwdLen==1)
+		cancelRxXoff,	// cancel any receive XOFF state (_txXoff)
+		returnStatus;	// return current status NOW
+};
+
+// defines for bits in lcr
+#define		USA_DATABITS_5		0x00
+#define		USA_DATABITS_6		0x01
+#define		USA_DATABITS_7		0x02
+#define		USA_DATABITS_8		0x03
+#define		STOPBITS_5678_1		0x00	// 1 stop bit for all byte sizes
+#define		STOPBITS_5_1p5		0x04	// 1.5 stop bits for 5-bit byte
+#define		STOPBITS_678_2		0x04	// 2 stop bits for 6-8 bit byte
+#define		USA_PARITY_NONE		0x00
+#define		USA_PARITY_ODD		0x08
+#define		USA_PARITY_EVEN		0x18
+#define		PARITY_MARK_1  		0x28   	// force parity MARK
+#define		PARITY_SPACE_0 		0x38	// force parity SPACE
+
+#define		TXFLOW_CTS			0x04	
+#define		TXFLOW_DSR			0x08
+#define		TXFLOW_XOFF			0x01	
+#define		TXFLOW_XOFF_ANY		0x02	
+#define		TXFLOW_XOFF_BITS	(TXFLOW_XOFF | TXFLOW_XOFF_ANY)
+
+#define		RXFLOW_XOFF			0x10	
+#define		RXFLOW_RTS			0x20	
+#define		RXFLOW_DTR			0x40
+#define		RXFLOW_DSR_SENSITIVITY	0x80
+
+#define		RXMODE_BYHAND		0x00	
+#define		RXMODE_DMA			0x02	
+
+#define		TXMODE_BYHAND		0x00	
+#define		TXMODE_DMA			0x02	
+
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+struct keyspan_usa90_portStatusMessage	
+{
+	u8	msr,			// reports the actual MSR register
+		cts,			// reports CTS pin
+		dcd,			// reports DCD pin
+		dsr,			// reports DSR pin
+		ri,				// reports RI pin
+		_txXoff,		// port is in XOFF state (we received XOFF)
+		rxBreak,		// reports break state
+		rxOverrun,		// count of overrun errors (since last reported)
+		rxParity,		// count of parity errors (since last reported)
+		rxFrame,		// count of frame errors (since last reported)
+		portState,		// PORTSTATE_xxx bits (useful for debugging)
+		messageAck,		// message acknowledgement
+		charAck,		// character acknowledgement
+		controlResponse;	// (value = returnStatus) a control message has been processed 
+};
+
+// bits in RX data message when STAT byte is included
+
+#define	RXERROR_OVERRUN		0x02
+#define	RXERROR_PARITY		0x04
+#define	RXERROR_FRAMING		0x08
+#define	RXERROR_BREAK		0x10
+
+#define	PORTSTATE_ENABLED	0x80
+#define	PORTSTATE_TXFLUSH	0x01
+#define	PORTSTATE_TXBREAK	0x02
+#define	PORTSTATE_LOOPBACK 	0x04
+
+// MSR bits
+
+#define USA_MSR_dCTS	  		0x01		// CTS has changed since last report	
+#define USA_MSR_dDSR	  		0x02
+#define USA_MSR_dRI			0x04
+#define USA_MSR_dDCD	  		0x08
+
+#define USA_MSR_CTS			0x10	  	// current state of CTS
+#define USA_MSR_DSR			0x20
+#define USA_USA_MSR_RI			0x40
+#define MSR_DCD				0x80
+
+// ie: the maximum length of an endpoint buffer
+#define		MAX_DATA_LEN			64
+
+#endif