Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 250 insertions, 0 deletions

diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
new file mode 100644
index 000000000..0468ea821
--- /dev/null
+++ b/drivers/video/backlight/locomolcd.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight control code for Sharp Zaurus SL-5500
+ *
+ * Copyright 2005 John Lenz <lenz@cs.wisc.edu>
+ * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-)
+ *
+ * This driver assumes single CPU. That's okay, because collie is
+ * slightly old hardware, and no one is going to retrofit second CPU to
+ * old PDA.
+ */
+
+/* LCD power functions */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <asm/hardware/locomo.h>
+#include <asm/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/mach-types.h>
+
+#include "../../../arch/arm/mach-sa1100/generic.h"
+
+static struct backlight_device *locomolcd_bl_device;
+static struct locomo_dev *locomolcd_dev;
+static unsigned long locomolcd_flags;
+#define LOCOMOLCD_SUSPENDED     0x01
+
+static void locomolcd_on(int comadj)
+{
+	locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1);
+	mdelay(2);
+
+	locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1);
+	mdelay(2);
+
+	locomo_m62332_senddata(locomolcd_dev, comadj, 0);
+	mdelay(5);
+
+	locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1);
+	mdelay(10);
+
+	/* TFTCRST | CPSOUT=0 | CPSEN */
+	locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
+
+	/* Set CPSD */
+	locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
+
+	/* TFTCRST | CPSOUT=0 | CPSEN */
+	locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
+	mdelay(10);
+
+	locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1);
+}
+
+static void locomolcd_off(int comadj)
+{
+	/* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
+	locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
+	mdelay(1);
+
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
+	mdelay(110);
+
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
+	mdelay(700);
+
+	/* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
+	locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
+	locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
+}
+
+void locomolcd_power(int on)
+{
+	int comadj = sharpsl_param.comadj;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (!locomolcd_dev) {
+		local_irq_restore(flags);
+		return;
+	}
+
+	/* read comadj */
+	if (comadj == -1 && machine_is_collie())
+		comadj = 128;
+	if (comadj == -1 && machine_is_poodle())
+		comadj = 118;
+
+	if (on)
+		locomolcd_on(comadj);
+	else
+		locomolcd_off(comadj);
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(locomolcd_power);
+
+static int current_intensity;
+
+static int locomolcd_set_intensity(struct backlight_device *bd)
+{
+	int intensity = backlight_get_brightness(bd);
+
+	if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
+		intensity = 0;
+
+	switch (intensity) {
+	/*
+	 * AC and non-AC are handled differently,
+	 * but produce same results in sharp code?
+	 */
+	case 0:
+		locomo_frontlight_set(locomolcd_dev, 0, 0, 161);
+		break;
+	case 1:
+		locomo_frontlight_set(locomolcd_dev, 117, 0, 161);
+		break;
+	case 2:
+		locomo_frontlight_set(locomolcd_dev, 163, 0, 148);
+		break;
+	case 3:
+		locomo_frontlight_set(locomolcd_dev, 194, 0, 161);
+		break;
+	case 4:
+		locomo_frontlight_set(locomolcd_dev, 194, 1, 161);
+		break;
+	default:
+		return -ENODEV;
+	}
+	current_intensity = intensity;
+	return 0;
+}
+
+static int locomolcd_get_intensity(struct backlight_device *bd)
+{
+	return current_intensity;
+}
+
+static const struct backlight_ops locomobl_data = {
+	.get_brightness = locomolcd_get_intensity,
+	.update_status  = locomolcd_set_intensity,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int locomolcd_suspend(struct device *dev)
+{
+	locomolcd_flags |= LOCOMOLCD_SUSPENDED;
+	locomolcd_set_intensity(locomolcd_bl_device);
+	return 0;
+}
+
+static int locomolcd_resume(struct device *dev)
+{
+	locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
+	locomolcd_set_intensity(locomolcd_bl_device);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(locomolcd_pm_ops, locomolcd_suspend, locomolcd_resume);
+
+static int locomolcd_probe(struct locomo_dev *ldev)
+{
+	struct backlight_properties props;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	locomolcd_dev = ldev;
+
+	locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
+
+	/*
+	 * the poodle_lcd_power function is called for the first time
+	 * from fs_initcall, which is before locomo is activated.
+	 * We need to recall poodle_lcd_power here
+	 */
+	if (machine_is_poodle())
+		locomolcd_power(1);
+
+	local_irq_restore(flags);
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 4;
+	locomolcd_bl_device = backlight_device_register("locomo-bl",
+							&ldev->dev, NULL,
+							&locomobl_data, &props);
+
+	if (IS_ERR(locomolcd_bl_device))
+		return PTR_ERR(locomolcd_bl_device);
+
+	/* Set up frontlight so that screen is readable */
+	locomolcd_bl_device->props.brightness = 2;
+	locomolcd_set_intensity(locomolcd_bl_device);
+
+	return 0;
+}
+
+static void locomolcd_remove(struct locomo_dev *dev)
+{
+	unsigned long flags;
+
+	locomolcd_bl_device->props.brightness = 0;
+	locomolcd_bl_device->props.power = 0;
+	locomolcd_set_intensity(locomolcd_bl_device);
+
+	backlight_device_unregister(locomolcd_bl_device);
+	local_irq_save(flags);
+	locomolcd_dev = NULL;
+	local_irq_restore(flags);
+}
+
+static struct locomo_driver poodle_lcd_driver = {
+	.drv = {
+		.name	= "locomo-backlight",
+		.pm	= &locomolcd_pm_ops,
+	},
+	.devid	= LOCOMO_DEVID_BACKLIGHT,
+	.probe	= locomolcd_probe,
+	.remove	= locomolcd_remove,
+};
+
+static int __init locomolcd_init(void)
+{
+	return locomo_driver_register(&poodle_lcd_driver);
+}
+
+static void __exit locomolcd_exit(void)
+{
+	locomo_driver_unregister(&poodle_lcd_driver);
+}
+
+module_init(locomolcd_init);
+module_exit(locomolcd_exit);
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>");
+MODULE_DESCRIPTION("Collie LCD driver");
+MODULE_LICENSE("GPL");