Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 2449 insertions, 0 deletions

diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig
new file mode 100644
index 000000000..dea2c661b
--- /dev/null
+++ b/sound/arm/Kconfig
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# ALSA ARM drivers
+
+menuconfig SND_ARM
+	bool "ARM sound devices"
+	depends on ARM
+	default y
+	help
+	  Support for sound devices specific to ARM architectures.
+	  Drivers that are implemented on ASoC can be found in
+	  "ALSA for SoC audio support" section.
+
+if SND_ARM
+
+config SND_ARMAACI
+	tristate "ARM PrimeCell PL041 AC Link support"
+	depends on ARM_AMBA
+	select SND_PCM
+	select SND_AC97_CODEC
+
+config SND_PXA2XX_AC97
+	tristate "AC97 driver for the Intel PXA2xx chip"
+	depends on ARCH_PXA
+	select SND_AC97_CODEC
+	select SND_PXA2XX_LIB
+	select SND_PXA2XX_LIB_AC97
+	help
+	  Say Y or M if you want to support any AC97 codec attached to
+	  the PXA2xx AC97 interface.
+
+endif	# SND_ARM
+
+config SND_PXA2XX_LIB
+	tristate
+	select SND_DMAENGINE_PCM
+
+config SND_PXA2XX_LIB_AC97
+	bool
diff --git a/sound/arm/Makefile b/sound/arm/Makefile
new file mode 100644
index 000000000..34c769489
--- /dev/null
+++ b/sound/arm/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for ALSA
+#
+
+obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
+snd-aaci-objs			:= aaci.o
+
+obj-$(CONFIG_SND_PXA2XX_LIB)	+= snd-pxa2xx-lib.o
+snd-pxa2xx-lib-y		:= pxa2xx-pcm-lib.o
+snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_AC97)	+= pxa2xx-ac97-lib.o
+
+obj-$(CONFIG_SND_PXA2XX_AC97)	+= snd-pxa2xx-ac97.o
+snd-pxa2xx-ac97-objs		:= pxa2xx-ac97.o
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
new file mode 100644
index 000000000..0817ad21a
--- /dev/null
+++ b/sound/arm/aaci.c
@@ -0,0 +1,1094 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ *  Documentation: ARM DDI 0173B
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/ac97_codec.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "aaci.h"
+
+#define DRIVER_NAME	"aaci-pl041"
+
+#define FRAME_PERIOD_US	21
+
+/*
+ * PM support is not complete.  Turn it off.
+ */
+#undef CONFIG_PM
+
+static void aaci_ac97_select_codec(struct aaci *aaci, struct snd_ac97 *ac97)
+{
+	u32 v, maincr = aaci->maincr | MAINCR_SCRA(ac97->num);
+
+	/*
+	 * Ensure that the slot 1/2 RX registers are empty.
+	 */
+	v = readl(aaci->base + AACI_SLFR);
+	if (v & SLFR_2RXV)
+		readl(aaci->base + AACI_SL2RX);
+	if (v & SLFR_1RXV)
+		readl(aaci->base + AACI_SL1RX);
+
+	if (maincr != readl(aaci->base + AACI_MAINCR)) {
+		writel(maincr, aaci->base + AACI_MAINCR);
+		readl(aaci->base + AACI_MAINCR);
+		udelay(1);
+	}
+}
+
+/*
+ * P29:
+ *  The recommended use of programming the external codec through slot 1
+ *  and slot 2 data is to use the channels during setup routines and the
+ *  slot register at any other time.  The data written into slot 1, slot 2
+ *  and slot 12 registers is transmitted only when their corresponding
+ *  SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR
+ *  register.
+ */
+static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+			    unsigned short val)
+{
+	struct aaci *aaci = ac97->private_data;
+	int timeout;
+	u32 v;
+
+	if (ac97->num >= 4)
+		return;
+
+	mutex_lock(&aaci->ac97_sem);
+
+	aaci_ac97_select_codec(aaci, ac97);
+
+	/*
+	 * P54: You must ensure that AACI_SL2TX is always written
+	 * to, if required, before data is written to AACI_SL1TX.
+	 */
+	writel(val << 4, aaci->base + AACI_SL2TX);
+	writel(reg << 12, aaci->base + AACI_SL1TX);
+
+	/* Initially, wait one frame period */
+	udelay(FRAME_PERIOD_US);
+
+	/* And then wait an additional eight frame periods for it to be sent */
+	timeout = FRAME_PERIOD_US * 8;
+	do {
+		udelay(1);
+		v = readl(aaci->base + AACI_SLFR);
+	} while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout);
+
+	if (v & (SLFR_1TXB|SLFR_2TXB))
+		dev_err(&aaci->dev->dev,
+			"timeout waiting for write to complete\n");
+
+	mutex_unlock(&aaci->ac97_sem);
+}
+
+/*
+ * Read an AC'97 register.
+ */
+static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
+{
+	struct aaci *aaci = ac97->private_data;
+	int timeout, retries = 10;
+	u32 v;
+
+	if (ac97->num >= 4)
+		return ~0;
+
+	mutex_lock(&aaci->ac97_sem);
+
+	aaci_ac97_select_codec(aaci, ac97);
+
+	/*
+	 * Write the register address to slot 1.
+	 */
+	writel((reg << 12) | (1 << 19), aaci->base + AACI_SL1TX);
+
+	/* Initially, wait one frame period */
+	udelay(FRAME_PERIOD_US);
+
+	/* And then wait an additional eight frame periods for it to be sent */
+	timeout = FRAME_PERIOD_US * 8;
+	do {
+		udelay(1);
+		v = readl(aaci->base + AACI_SLFR);
+	} while ((v & SLFR_1TXB) && --timeout);
+
+	if (v & SLFR_1TXB) {
+		dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n");
+		v = ~0;
+		goto out;
+	}
+
+	/* Now wait for the response frame */
+	udelay(FRAME_PERIOD_US);
+
+	/* And then wait an additional eight frame periods for data */
+	timeout = FRAME_PERIOD_US * 8;
+	do {
+		udelay(1);
+		cond_resched();
+		v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV);
+	} while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout);
+
+	if (v != (SLFR_1RXV|SLFR_2RXV)) {
+		dev_err(&aaci->dev->dev, "timeout on RX valid\n");
+		v = ~0;
+		goto out;
+	}
+
+	do {
+		v = readl(aaci->base + AACI_SL1RX) >> 12;
+		if (v == reg) {
+			v = readl(aaci->base + AACI_SL2RX) >> 4;
+			break;
+		} else if (--retries) {
+			dev_warn(&aaci->dev->dev,
+				 "ac97 read back fail.  retry\n");
+			continue;
+		} else {
+			dev_warn(&aaci->dev->dev,
+				"wrong ac97 register read back (%x != %x)\n",
+				v, reg);
+			v = ~0;
+		}
+	} while (retries);
+ out:
+	mutex_unlock(&aaci->ac97_sem);
+	return v;
+}
+
+static inline void
+aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask)
+{
+	u32 val;
+	int timeout = 5000;
+
+	do {
+		udelay(1);
+		val = readl(aacirun->base + AACI_SR);
+	} while (val & mask && timeout--);
+}
+
+
+
+/*
+ * Interrupt support.
+ */
+static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
+{
+	if (mask & ISR_ORINTR) {
+		dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel);
+		writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR);
+	}
+
+	if (mask & ISR_RXTOINTR) {
+		dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel);
+		writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR);
+	}
+
+	if (mask & ISR_RXINTR) {
+		struct aaci_runtime *aacirun = &aaci->capture;
+		bool period_elapsed = false;
+		void *ptr;
+
+		if (!aacirun->substream || !aacirun->start) {
+			dev_warn(&aaci->dev->dev, "RX interrupt???\n");
+			writel(0, aacirun->base + AACI_IE);
+			return;
+		}
+
+		spin_lock(&aacirun->lock);
+
+		ptr = aacirun->ptr;
+		do {
+			unsigned int len = aacirun->fifo_bytes;
+			u32 val;
+
+			if (aacirun->bytes <= 0) {
+				aacirun->bytes += aacirun->period;
+				period_elapsed = true;
+			}
+			if (!(aacirun->cr & CR_EN))
+				break;
+
+			val = readl(aacirun->base + AACI_SR);
+			if (!(val & SR_RXHF))
+				break;
+			if (!(val & SR_RXFF))
+				len >>= 1;
+
+			aacirun->bytes -= len;
+
+			/* reading 16 bytes at a time */
+			for( ; len > 0; len -= 16) {
+				asm(
+					"ldmia	%1, {r0, r1, r2, r3}\n\t"
+					"stmia	%0!, {r0, r1, r2, r3}"
+					: "+r" (ptr)
+					: "r" (aacirun->fifo)
+					: "r0", "r1", "r2", "r3", "cc");
+
+				if (ptr >= aacirun->end)
+					ptr = aacirun->start;
+			}
+		} while(1);
+
+		aacirun->ptr = ptr;
+
+		spin_unlock(&aacirun->lock);
+
+		if (period_elapsed)
+			snd_pcm_period_elapsed(aacirun->substream);
+	}
+
+	if (mask & ISR_URINTR) {
+		dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel);
+		writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR);
+	}
+
+	if (mask & ISR_TXINTR) {
+		struct aaci_runtime *aacirun = &aaci->playback;
+		bool period_elapsed = false;
+		void *ptr;
+
+		if (!aacirun->substream || !aacirun->start) {
+			dev_warn(&aaci->dev->dev, "TX interrupt???\n");
+			writel(0, aacirun->base + AACI_IE);
+			return;
+		}
+
+		spin_lock(&aacirun->lock);
+
+		ptr = aacirun->ptr;
+		do {
+			unsigned int len = aacirun->fifo_bytes;
+			u32 val;
+
+			if (aacirun->bytes <= 0) {
+				aacirun->bytes += aacirun->period;
+				period_elapsed = true;
+			}
+			if (!(aacirun->cr & CR_EN))
+				break;
+
+			val = readl(aacirun->base + AACI_SR);
+			if (!(val & SR_TXHE))
+				break;
+			if (!(val & SR_TXFE))
+				len >>= 1;
+
+			aacirun->bytes -= len;
+
+			/* writing 16 bytes at a time */
+			for ( ; len > 0; len -= 16) {
+				asm(
+					"ldmia	%0!, {r0, r1, r2, r3}\n\t"
+					"stmia	%1, {r0, r1, r2, r3}"
+					: "+r" (ptr)
+					: "r" (aacirun->fifo)
+					: "r0", "r1", "r2", "r3", "cc");
+
+				if (ptr >= aacirun->end)
+					ptr = aacirun->start;
+			}
+		} while (1);
+
+		aacirun->ptr = ptr;
+
+		spin_unlock(&aacirun->lock);
+
+		if (period_elapsed)
+			snd_pcm_period_elapsed(aacirun->substream);
+	}
+}
+
+static irqreturn_t aaci_irq(int irq, void *devid)
+{
+	struct aaci *aaci = devid;
+	u32 mask;
+	int i;
+
+	mask = readl(aaci->base + AACI_ALLINTS);
+	if (mask) {
+		u32 m = mask;
+		for (i = 0; i < 4; i++, m >>= 7) {
+			if (m & 0x7f) {
+				aaci_fifo_irq(aaci, i, m);
+			}
+		}
+	}
+
+	return mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
+
+
+/*
+ * ALSA support.
+ */
+static const struct snd_pcm_hardware aaci_hw_info = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED |
+				  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				  SNDRV_PCM_INFO_RESUME,
+
+	/*
+	 * ALSA doesn't support 18-bit or 20-bit packed into 32-bit
+	 * words.  It also doesn't support 12-bit at all.
+	 */
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+
+	/* rates are setup from the AC'97 codec */
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 64 * 1024,
+	.period_bytes_min	= 256,
+	.period_bytes_max	= PAGE_SIZE,
+	.periods_min		= 4,
+	.periods_max		= PAGE_SIZE / 16,
+};
+
+/*
+ * We can support two and four channel audio.  Unfortunately
+ * six channel audio requires a non-standard channel ordering:
+ *   2 -> FL(3), FR(4)
+ *   4 -> FL(3), FR(4), SL(7), SR(8)
+ *   6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
+ *        FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
+ * This requires an ALSA configuration file to correct.
+ */
+static int aaci_rule_channels(struct snd_pcm_hw_params *p,
+	struct snd_pcm_hw_rule *rule)
+{
+	static const unsigned int channel_list[] = { 2, 4, 6 };
+	struct aaci *aaci = rule->private;
+	unsigned int mask = 1 << 0, slots;
+
+	/* pcms[0] is the our 5.1 PCM instance. */
+	slots = aaci->ac97_bus->pcms[0].r[0].slots;
+	if (slots & (1 << AC97_SLOT_PCM_SLEFT)) {
+		mask |= 1 << 1;
+		if (slots & (1 << AC97_SLOT_LFE))
+			mask |= 1 << 2;
+	}
+
+	return snd_interval_list(hw_param_interval(p, rule->var),
+				 ARRAY_SIZE(channel_list), channel_list, mask);
+}
+
+static int aaci_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct aaci *aaci = substream->private_data;
+	struct aaci_runtime *aacirun;
+	int ret = 0;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		aacirun = &aaci->playback;
+	} else {
+		aacirun = &aaci->capture;
+	}
+
+	aacirun->substream = substream;
+	runtime->private_data = aacirun;
+	runtime->hw = aaci_hw_info;
+	runtime->hw.rates = aacirun->pcm->rates;
+	snd_pcm_limit_hw_rates(runtime);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		runtime->hw.channels_max = 6;
+
+		/* Add rule describing channel dependency. */
+		ret = snd_pcm_hw_rule_add(substream->runtime, 0,
+					  SNDRV_PCM_HW_PARAM_CHANNELS,
+					  aaci_rule_channels, aaci,
+					  SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+		if (ret)
+			return ret;
+
+		if (aacirun->pcm->r[1].slots)
+			snd_ac97_pcm_double_rate_rules(runtime);
+	}
+
+	/*
+	 * ALSA wants the byte-size of the FIFOs.  As we only support
+	 * 16-bit samples, this is twice the FIFO depth irrespective
+	 * of whether it's in compact mode or not.
+	 */
+	runtime->hw.fifo_size = aaci->fifo_depth * 2;
+
+	mutex_lock(&aaci->irq_lock);
+	if (!aaci->users++) {
+		ret = request_irq(aaci->dev->irq[0], aaci_irq,
+			   IRQF_SHARED, DRIVER_NAME, aaci);
+		if (ret != 0)
+			aaci->users--;
+	}
+	mutex_unlock(&aaci->irq_lock);
+
+	return ret;
+}
+
+
+/*
+ * Common ALSA stuff
+ */
+static int aaci_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct aaci *aaci = substream->private_data;
+	struct aaci_runtime *aacirun = substream->runtime->private_data;
+
+	WARN_ON(aacirun->cr & CR_EN);
+
+	aacirun->substream = NULL;
+
+	mutex_lock(&aaci->irq_lock);
+	if (!--aaci->users)
+		free_irq(aaci->dev->irq[0], aaci);
+	mutex_unlock(&aaci->irq_lock);
+
+	return 0;
+}
+
+static int aaci_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct aaci_runtime *aacirun = substream->runtime->private_data;
+
+	/*
+	 * This must not be called with the device enabled.
+	 */
+	WARN_ON(aacirun->cr & CR_EN);
+
+	if (aacirun->pcm_open)
+		snd_ac97_pcm_close(aacirun->pcm);
+	aacirun->pcm_open = 0;
+
+	return 0;
+}
+
+/* Channel to slot mask */
+static const u32 channels_to_slotmask[] = {
+	[2] = CR_SL3 | CR_SL4,
+	[4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
+	[6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
+};
+
+static int aaci_pcm_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	struct aaci_runtime *aacirun = substream->runtime->private_data;
+	struct aaci *aaci = substream->private_data;
+	unsigned int channels = params_channels(params);
+	unsigned int rate = params_rate(params);
+	int dbl = rate > 48000;
+	int err;
+
+	aaci_pcm_hw_free(substream);
+	if (aacirun->pcm_open) {
+		snd_ac97_pcm_close(aacirun->pcm);
+		aacirun->pcm_open = 0;
+	}
+
+	/* channels is already limited to 2, 4, or 6 by aaci_rule_channels */
+	if (dbl && channels != 2)
+		return -EINVAL;
+
+	err = snd_ac97_pcm_open(aacirun->pcm, rate, channels,
+				aacirun->pcm->r[dbl].slots);
+
+	aacirun->pcm_open = err == 0;
+	aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
+	aacirun->cr |= channels_to_slotmask[channels + dbl * 2];
+
+	/*
+	 * fifo_bytes is the number of bytes we transfer to/from
+	 * the FIFO, including padding.  So that's x4.  As we're
+	 * in compact mode, the FIFO is half the size.
+	 */
+	aacirun->fifo_bytes = aaci->fifo_depth * 4 / 2;
+
+	return err;
+}
+
+static int aaci_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct aaci_runtime *aacirun = runtime->private_data;
+
+	aacirun->period	= snd_pcm_lib_period_bytes(substream);
+	aacirun->start	= runtime->dma_area;
+	aacirun->end	= aacirun->start + snd_pcm_lib_buffer_bytes(substream);
+	aacirun->ptr	= aacirun->start;
+	aacirun->bytes	= aacirun->period;
+
+	return 0;
+}
+
+static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct aaci_runtime *aacirun = runtime->private_data;
+	ssize_t bytes = aacirun->ptr - aacirun->start;
+
+	return bytes_to_frames(runtime, bytes);
+}
+
+
+/*
+ * Playback specific ALSA stuff
+ */
+static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun)
+{
+	u32 ie;
+
+	ie = readl(aacirun->base + AACI_IE);
+	ie &= ~(IE_URIE|IE_TXIE);
+	writel(ie, aacirun->base + AACI_IE);
+	aacirun->cr &= ~CR_EN;
+	aaci_chan_wait_ready(aacirun, SR_TXB);
+	writel(aacirun->cr, aacirun->base + AACI_TXCR);
+}
+
+static void aaci_pcm_playback_start(struct aaci_runtime *aacirun)
+{
+	u32 ie;
+
+	aaci_chan_wait_ready(aacirun, SR_TXB);
+	aacirun->cr |= CR_EN;
+
+	ie = readl(aacirun->base + AACI_IE);
+	ie |= IE_URIE | IE_TXIE;
+	writel(ie, aacirun->base + AACI_IE);
+	writel(aacirun->cr, aacirun->base + AACI_TXCR);
+}
+
+static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct aaci_runtime *aacirun = substream->runtime->private_data;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&aacirun->lock, flags);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		aaci_pcm_playback_start(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+		aaci_pcm_playback_start(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		aaci_pcm_playback_stop(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		aaci_pcm_playback_stop(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&aacirun->lock, flags);
+
+	return ret;
+}
+
+static const struct snd_pcm_ops aaci_playback_ops = {
+	.open		= aaci_pcm_open,
+	.close		= aaci_pcm_close,
+	.hw_params	= aaci_pcm_hw_params,
+	.hw_free	= aaci_pcm_hw_free,
+	.prepare	= aaci_pcm_prepare,
+	.trigger	= aaci_pcm_playback_trigger,
+	.pointer	= aaci_pcm_pointer,
+};
+
+static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun)
+{
+	u32 ie;
+
+	aaci_chan_wait_ready(aacirun, SR_RXB);
+
+	ie = readl(aacirun->base + AACI_IE);
+	ie &= ~(IE_ORIE | IE_RXIE);
+	writel(ie, aacirun->base+AACI_IE);
+
+	aacirun->cr &= ~CR_EN;
+
+	writel(aacirun->cr, aacirun->base + AACI_RXCR);
+}
+
+static void aaci_pcm_capture_start(struct aaci_runtime *aacirun)
+{
+	u32 ie;
+
+	aaci_chan_wait_ready(aacirun, SR_RXB);
+
+#ifdef DEBUG
+	/* RX Timeout value: bits 28:17 in RXCR */
+	aacirun->cr |= 0xf << 17;
+#endif
+
+	aacirun->cr |= CR_EN;
+	writel(aacirun->cr, aacirun->base + AACI_RXCR);
+
+	ie = readl(aacirun->base + AACI_IE);
+	ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full
+	writel(ie, aacirun->base + AACI_IE);
+}
+
+static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct aaci_runtime *aacirun = substream->runtime->private_data;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&aacirun->lock, flags);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		aaci_pcm_capture_start(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+		aaci_pcm_capture_start(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		aaci_pcm_capture_stop(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		aaci_pcm_capture_stop(aacirun);
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&aacirun->lock, flags);
+
+	return ret;
+}
+
+static int aaci_pcm_capture_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct aaci *aaci = substream->private_data;
+
+	aaci_pcm_prepare(substream);
+
+	/* allow changing of sample rate */
+	aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */
+	aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+	aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate);
+
+	/* Record select: Mic: 0, Aux: 3, Line: 4 */
+	aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404);
+
+	return 0;
+}
+
+static const struct snd_pcm_ops aaci_capture_ops = {
+	.open		= aaci_pcm_open,
+	.close		= aaci_pcm_close,
+	.hw_params	= aaci_pcm_hw_params,
+	.hw_free	= aaci_pcm_hw_free,
+	.prepare	= aaci_pcm_capture_prepare,
+	.trigger	= aaci_pcm_capture_trigger,
+	.pointer	= aaci_pcm_pointer,
+};
+
+/*
+ * Power Management.
+ */
+#ifdef CONFIG_PM
+static int aaci_do_suspend(struct snd_card *card)
+{
+	struct aaci *aaci = card->private_data;
+	snd_power_change_state(card, SNDRV_CTL_POWER_D3cold);
+	return 0;
+}
+
+static int aaci_do_resume(struct snd_card *card)
+{
+	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+	return 0;
+}
+
+static int aaci_suspend(struct device *dev)
+{
+	struct snd_card *card = dev_get_drvdata(dev);
+	return card ? aaci_do_suspend(card) : 0;
+}
+
+static int aaci_resume(struct device *dev)
+{
+	struct snd_card *card = dev_get_drvdata(dev);
+	return card ? aaci_do_resume(card) : 0;
+}
+
+static SIMPLE_DEV_PM_OPS(aaci_dev_pm_ops, aaci_suspend, aaci_resume);
+#define AACI_DEV_PM_OPS (&aaci_dev_pm_ops)
+#else
+#define AACI_DEV_PM_OPS NULL
+#endif
+
+
+static const struct ac97_pcm ac97_defs[] = {
+	[0] = {	/* Front PCM */
+		.exclusive = 1,
+		.r = {
+			[0] = {
+				.slots	= (1 << AC97_SLOT_PCM_LEFT) |
+					  (1 << AC97_SLOT_PCM_RIGHT) |
+					  (1 << AC97_SLOT_PCM_CENTER) |
+					  (1 << AC97_SLOT_PCM_SLEFT) |
+					  (1 << AC97_SLOT_PCM_SRIGHT) |
+					  (1 << AC97_SLOT_LFE),
+			},
+			[1] = {
+				.slots	= (1 << AC97_SLOT_PCM_LEFT) |
+					  (1 << AC97_SLOT_PCM_RIGHT) |
+					  (1 << AC97_SLOT_PCM_LEFT_0) |
+					  (1 << AC97_SLOT_PCM_RIGHT_0),
+			},
+		},
+	},
+	[1] = {	/* PCM in */
+		.stream = 1,
+		.exclusive = 1,
+		.r = {
+			[0] = {
+				.slots	= (1 << AC97_SLOT_PCM_LEFT) |
+					  (1 << AC97_SLOT_PCM_RIGHT),
+			},
+		},
+	},
+	[2] = {	/* Mic in */
+		.stream = 1,
+		.exclusive = 1,
+		.r = {
+			[0] = {
+				.slots	= (1 << AC97_SLOT_MIC),
+			},
+		},
+	}
+};
+
+static const struct snd_ac97_bus_ops aaci_bus_ops = {
+	.write	= aaci_ac97_write,
+	.read	= aaci_ac97_read,
+};
+
+static int aaci_probe_ac97(struct aaci *aaci)
+{
+	struct snd_ac97_template ac97_template;
+	struct snd_ac97_bus *ac97_bus;
+	struct snd_ac97 *ac97;
+	int ret;
+
+	/*
+	 * Assert AACIRESET for 2us
+	 */
+	writel(0, aaci->base + AACI_RESET);
+	udelay(2);
+	writel(RESET_NRST, aaci->base + AACI_RESET);
+
+	/*
+	 * Give the AC'97 codec more than enough time
+	 * to wake up. (42us = ~2 frames at 48kHz.)
+	 */
+	udelay(FRAME_PERIOD_US * 2);
+
+	ret = snd_ac97_bus(aaci->card, 0, &aaci_bus_ops, aaci, &ac97_bus);
+	if (ret)
+		goto out;
+
+	ac97_bus->clock = 48000;
+	aaci->ac97_bus = ac97_bus;
+
+	memset(&ac97_template, 0, sizeof(struct snd_ac97_template));
+	ac97_template.private_data = aaci;
+	ac97_template.num = 0;
+	ac97_template.scaps = AC97_SCAP_SKIP_MODEM;
+
+	ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97);
+	if (ret)
+		goto out;
+	aaci->ac97 = ac97;
+
+	/*
+	 * Disable AC97 PC Beep input on audio codecs.
+	 */
+	if (ac97_is_audio(ac97))
+		snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x801e);
+
+	ret = snd_ac97_pcm_assign(ac97_bus, ARRAY_SIZE(ac97_defs), ac97_defs);
+	if (ret)
+		goto out;
+
+	aaci->playback.pcm = &ac97_bus->pcms[0];
+	aaci->capture.pcm  = &ac97_bus->pcms[1];
+
+ out:
+	return ret;
+}
+
+static void aaci_free_card(struct snd_card *card)
+{
+	struct aaci *aaci = card->private_data;
+
+	iounmap(aaci->base);
+}
+
+static struct aaci *aaci_init_card(struct amba_device *dev)
+{
+	struct aaci *aaci;
+	struct snd_card *card;
+	int err;
+
+	err = snd_card_new(&dev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			   THIS_MODULE, sizeof(struct aaci), &card);
+	if (err < 0)
+		return NULL;
+
+	card->private_free = aaci_free_card;
+
+	strscpy(card->driver, DRIVER_NAME, sizeof(card->driver));
+	strscpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s PL%03x rev%u at 0x%08llx, irq %d",
+		 card->shortname, amba_part(dev), amba_rev(dev),
+		 (unsigned long long)dev->res.start, dev->irq[0]);
+
+	aaci = card->private_data;
+	mutex_init(&aaci->ac97_sem);
+	mutex_init(&aaci->irq_lock);
+	aaci->card = card;
+	aaci->dev = dev;
+
+	/* Set MAINCR to allow slot 1 and 2 data IO */
+	aaci->maincr = MAINCR_IE | MAINCR_SL1RXEN | MAINCR_SL1TXEN |
+		       MAINCR_SL2RXEN | MAINCR_SL2TXEN;
+
+	return aaci;
+}
+
+static int aaci_init_pcm(struct aaci *aaci)
+{
+	struct snd_pcm *pcm;
+	int ret;
+
+	ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm);
+	if (ret == 0) {
+		aaci->pcm = pcm;
+		pcm->private_data = aaci;
+		pcm->info_flags = 0;
+
+		strscpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
+
+		snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops);
+		snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops);
+		snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
+					       aaci->card->dev,
+					       0, 64 * 1024);
+	}
+
+	return ret;
+}
+
+static unsigned int aaci_size_fifo(struct aaci *aaci)
+{
+	struct aaci_runtime *aacirun = &aaci->playback;
+	int i;
+
+	/*
+	 * Enable the channel, but don't assign it to any slots, so
+	 * it won't empty onto the AC'97 link.
+	 */
+	writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR);
+
+	for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++)
+		writel(0, aacirun->fifo);
+
+	writel(0, aacirun->base + AACI_TXCR);
+
+	/*
+	 * Re-initialise the AACI after the FIFO depth test, to
+	 * ensure that the FIFOs are empty.  Unfortunately, merely
+	 * disabling the channel doesn't clear the FIFO.
+	 */
+	writel(aaci->maincr & ~MAINCR_IE, aaci->base + AACI_MAINCR);
+	readl(aaci->base + AACI_MAINCR);
+	udelay(1);
+	writel(aaci->maincr, aaci->base + AACI_MAINCR);
+
+	/*
+	 * If we hit 4096 entries, we failed.  Go back to the specified
+	 * fifo depth.
+	 */
+	if (i == 4096)
+		i = 8;
+
+	return i;
+}
+
+static int aaci_probe(struct amba_device *dev,
+		      const struct amba_id *id)
+{
+	struct aaci *aaci;
+	int ret, i;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		return ret;
+
+	aaci = aaci_init_card(dev);
+	if (!aaci) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
+	if (!aaci->base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * Playback uses AACI channel 0
+	 */
+	spin_lock_init(&aaci->playback.lock);
+	aaci->playback.base = aaci->base + AACI_CSCH1;
+	aaci->playback.fifo = aaci->base + AACI_DR1;
+
+	/*
+	 * Capture uses AACI channel 0
+	 */
+	spin_lock_init(&aaci->capture.lock);
+	aaci->capture.base = aaci->base + AACI_CSCH1;
+	aaci->capture.fifo = aaci->base + AACI_DR1;
+
+	for (i = 0; i < 4; i++) {
+		void __iomem *base = aaci->base + i * 0x14;
+
+		writel(0, base + AACI_IE);
+		writel(0, base + AACI_TXCR);
+		writel(0, base + AACI_RXCR);
+	}
+
+	writel(0x1fff, aaci->base + AACI_INTCLR);
+	writel(aaci->maincr, aaci->base + AACI_MAINCR);
+	/*
+	 * Fix: ac97 read back fail errors by reading
+	 * from any arbitrary aaci register.
+	 */
+	readl(aaci->base + AACI_CSCH1);
+	ret = aaci_probe_ac97(aaci);
+	if (ret)
+		goto out;
+
+	/*
+	 * Size the FIFOs (must be multiple of 16).
+	 * This is the number of entries in the FIFO.
+	 */
+	aaci->fifo_depth = aaci_size_fifo(aaci);
+	if (aaci->fifo_depth & 15) {
+		printk(KERN_WARNING "AACI: FIFO depth %d not supported\n",
+		       aaci->fifo_depth);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = aaci_init_pcm(aaci);
+	if (ret)
+		goto out;
+
+	ret = snd_card_register(aaci->card);
+	if (ret == 0) {
+		dev_info(&dev->dev, "%s\n", aaci->card->longname);
+		dev_info(&dev->dev, "FIFO %u entries\n", aaci->fifo_depth);
+		amba_set_drvdata(dev, aaci->card);
+		return ret;
+	}
+
+ out:
+	if (aaci)
+		snd_card_free(aaci->card);
+	amba_release_regions(dev);
+	return ret;
+}
+
+static void aaci_remove(struct amba_device *dev)
+{
+	struct snd_card *card = amba_get_drvdata(dev);
+
+	if (card) {
+		struct aaci *aaci = card->private_data;
+		writel(0, aaci->base + AACI_MAINCR);
+
+		snd_card_free(card);
+		amba_release_regions(dev);
+	}
+}
+
+static struct amba_id aaci_ids[] = {
+	{
+		.id	= 0x00041041,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, aaci_ids);
+
+static struct amba_driver aaci_driver = {
+	.drv		= {
+		.name	= DRIVER_NAME,
+		.pm	= AACI_DEV_PM_OPS,
+	},
+	.probe		= aaci_probe,
+	.remove		= aaci_remove,
+	.id_table	= aaci_ids,
+};
+
+module_amba_driver(aaci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver");
diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h
new file mode 100644
index 000000000..18680e7f8
--- /dev/null
+++ b/sound/arm/aaci.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ */
+#ifndef AACI_H
+#define AACI_H
+
+/*
+ * Control and status register offsets
+ *  P39.
+ */
+#define AACI_CSCH1	0x000
+#define AACI_CSCH2	0x014
+#define AACI_CSCH3	0x028
+#define AACI_CSCH4	0x03c
+
+#define AACI_RXCR	0x000	/* 29 bits Control Rx FIFO */
+#define AACI_TXCR	0x004	/* 17 bits Control Tx FIFO */
+#define AACI_SR		0x008	/* 12 bits Status */
+#define AACI_ISR	0x00c	/* 7 bits  Int Status */
+#define AACI_IE 	0x010	/* 7 bits  Int Enable */
+
+/*
+ * Other registers
+ */
+#define AACI_SL1RX	0x050
+#define AACI_SL1TX	0x054
+#define AACI_SL2RX	0x058
+#define AACI_SL2TX	0x05c
+#define AACI_SL12RX	0x060
+#define AACI_SL12TX	0x064
+#define AACI_SLFR	0x068	/* slot flags */
+#define AACI_SLISTAT	0x06c	/* slot interrupt status */
+#define AACI_SLIEN	0x070	/* slot interrupt enable */
+#define AACI_INTCLR	0x074	/* interrupt clear */
+#define AACI_MAINCR	0x078	/* main control */
+#define AACI_RESET	0x07c	/* reset control */
+#define AACI_SYNC	0x080	/* sync control */
+#define AACI_ALLINTS	0x084	/* all fifo interrupt status */
+#define AACI_MAINFR	0x088	/* main flag register */
+#define AACI_DR1	0x090	/* data read/written fifo 1 */
+#define AACI_DR2	0x0b0	/* data read/written fifo 2 */
+#define AACI_DR3	0x0d0	/* data read/written fifo 3 */
+#define AACI_DR4	0x0f0	/* data read/written fifo 4 */
+
+/*
+ * TX/RX fifo control register (CR). P48
+ */
+#define CR_FEN		(1 << 16)	/* fifo enable */
+#define CR_COMPACT	(1 << 15)	/* compact mode */
+#define CR_SZ16		(0 << 13)	/* 16 bits */
+#define CR_SZ18		(1 << 13)	/* 18 bits */
+#define CR_SZ20		(2 << 13)	/* 20 bits */
+#define CR_SZ12		(3 << 13)	/* 12 bits */
+#define CR_SL12		(1 << 12)
+#define CR_SL11		(1 << 11)
+#define CR_SL10		(1 << 10)
+#define CR_SL9		(1 << 9)
+#define CR_SL8		(1 << 8)
+#define CR_SL7		(1 << 7)
+#define CR_SL6		(1 << 6)
+#define CR_SL5		(1 << 5)
+#define CR_SL4		(1 << 4)
+#define CR_SL3		(1 << 3)
+#define CR_SL2		(1 << 2)
+#define CR_SL1		(1 << 1)
+#define CR_EN		(1 << 0)	/* transmit enable */
+
+/*
+ * status register bits. P49
+ */
+#define SR_RXTOFE	(1 << 11)	/* rx timeout fifo empty */
+#define SR_TXTO		(1 << 10)	/* rx timeout fifo nonempty */
+#define SR_TXU		(1 << 9)	/* tx underrun */
+#define SR_RXO		(1 << 8)	/* rx overrun */
+#define SR_TXB		(1 << 7)	/* tx busy */
+#define SR_RXB		(1 << 6)	/* rx busy */
+#define SR_TXFF		(1 << 5)	/* tx fifo full */
+#define SR_RXFF		(1 << 4)	/* rx fifo full */
+#define SR_TXHE		(1 << 3)	/* tx fifo half empty */
+#define SR_RXHF		(1 << 2)	/* rx fifo half full */
+#define SR_TXFE		(1 << 1)	/* tx fifo empty */
+#define SR_RXFE		(1 << 0)	/* rx fifo empty */
+
+/*
+ * interrupt status register bits.
+ */
+#define ISR_RXTOFEINTR	(1 << 6)	/* rx fifo empty */
+#define ISR_URINTR	(1 << 5)	/* tx underflow */
+#define ISR_ORINTR	(1 << 4)	/* rx overflow */
+#define ISR_RXINTR	(1 << 3)	/* rx fifo */
+#define ISR_TXINTR	(1 << 2)	/* tx fifo intr */
+#define ISR_RXTOINTR	(1 << 1)	/* tx timeout */
+#define ISR_TXCINTR	(1 << 0)	/* tx complete */
+
+/*
+ * interrupt enable register bits.
+ */
+#define IE_RXTOIE	(1 << 6)
+#define IE_URIE		(1 << 5)
+#define IE_ORIE		(1 << 4)
+#define IE_RXIE		(1 << 3)
+#define IE_TXIE		(1 << 2)
+#define IE_RXTIE	(1 << 1)
+#define IE_TXCIE	(1 << 0)
+
+/*
+ * interrupt status. P51
+ */
+#define ISR_RXTOFE	(1 << 6)	/* rx timeout fifo empty */
+#define ISR_UR		(1 << 5)	/* tx fifo underrun */
+#define ISR_OR		(1 << 4)	/* rx fifo overrun */
+#define ISR_RX		(1 << 3)	/* rx interrupt status */
+#define ISR_TX		(1 << 2)	/* tx interrupt status */
+#define ISR_RXTO	(1 << 1)	/* rx timeout */
+#define ISR_TXC		(1 << 0)	/* tx complete */
+
+/*
+ * interrupt enable. P52
+ */
+#define IE_RXTOFE	(1 << 6)	/* rx timeout fifo empty */
+#define IE_UR		(1 << 5)	/* tx fifo underrun */
+#define IE_OR		(1 << 4)	/* rx fifo overrun */
+#define IE_RX		(1 << 3)	/* rx interrupt status */
+#define IE_TX		(1 << 2)	/* tx interrupt status */
+#define IE_RXTO		(1 << 1)	/* rx timeout */
+#define IE_TXC		(1 << 0)	/* tx complete */
+
+/*
+ * slot flag register bits. P56
+ */
+#define SLFR_RWIS	(1 << 13)	/* raw wake-up interrupt status */
+#define SLFR_RGPIOINTR	(1 << 12)	/* raw gpio interrupt */
+#define SLFR_12TXE	(1 << 11)	/* slot 12 tx empty */
+#define SLFR_12RXV	(1 << 10)	/* slot 12 rx valid */
+#define SLFR_2TXE	(1 << 9)	/* slot 2 tx empty */
+#define SLFR_2RXV	(1 << 8)	/* slot 2 rx valid */
+#define SLFR_1TXE	(1 << 7)	/* slot 1 tx empty */
+#define SLFR_1RXV	(1 << 6)	/* slot 1 rx valid */
+#define SLFR_12TXB	(1 << 5)	/* slot 12 tx busy */
+#define SLFR_12RXB	(1 << 4)	/* slot 12 rx busy */
+#define SLFR_2TXB	(1 << 3)	/* slot 2 tx busy */
+#define SLFR_2RXB	(1 << 2)	/* slot 2 rx busy */
+#define SLFR_1TXB	(1 << 1)	/* slot 1 tx busy */
+#define SLFR_1RXB	(1 << 0)	/* slot 1 rx busy */
+
+/*
+ * Interrupt clear register.
+ */
+#define ICLR_RXTOFEC4	(1 << 12)
+#define ICLR_RXTOFEC3	(1 << 11)
+#define ICLR_RXTOFEC2	(1 << 10)
+#define ICLR_RXTOFEC1	(1 << 9)
+#define ICLR_TXUEC4	(1 << 8)
+#define ICLR_TXUEC3	(1 << 7)
+#define ICLR_TXUEC2	(1 << 6)
+#define ICLR_TXUEC1	(1 << 5)
+#define ICLR_RXOEC4	(1 << 4)
+#define ICLR_RXOEC3	(1 << 3)
+#define ICLR_RXOEC2	(1 << 2)
+#define ICLR_RXOEC1	(1 << 1)
+#define ICLR_WISC	(1 << 0)
+
+/*
+ * Main control register bits. P62
+ */
+#define MAINCR_SCRA(x)	((x) << 10)	/* secondary codec reg access */
+#define MAINCR_DMAEN	(1 << 9)	/* dma enable */
+#define MAINCR_SL12TXEN	(1 << 8)	/* slot 12 transmit enable */
+#define MAINCR_SL12RXEN	(1 << 7)	/* slot 12 receive enable */
+#define MAINCR_SL2TXEN	(1 << 6)	/* slot 2 transmit enable */
+#define MAINCR_SL2RXEN	(1 << 5)	/* slot 2 receive enable */
+#define MAINCR_SL1TXEN	(1 << 4)	/* slot 1 transmit enable */
+#define MAINCR_SL1RXEN	(1 << 3)	/* slot 1 receive enable */
+#define MAINCR_LPM	(1 << 2)	/* low power mode */
+#define MAINCR_LOOPBK	(1 << 1)	/* loopback */
+#define MAINCR_IE	(1 << 0)	/* aaci interface enable */
+
+/*
+ * Reset register bits. P65
+ */
+#define RESET_NRST	(1 << 0)
+
+/*
+ * Sync register bits. P65
+ */
+#define SYNC_FORCE	(1 << 0)
+
+/*
+ * Main flag register bits. P66
+ */
+#define MAINFR_TXB	(1 << 1)	/* transmit busy */
+#define MAINFR_RXB	(1 << 0)	/* receive busy */
+
+
+
+struct aaci_runtime {
+	void			__iomem *base;
+	void			__iomem *fifo;
+	spinlock_t		lock;
+
+	struct ac97_pcm		*pcm;
+	int			pcm_open;
+
+	u32			cr;
+	struct snd_pcm_substream	*substream;
+
+	unsigned int		period;	/* byte size of a "period" */
+
+	/*
+	 * PIO support
+	 */
+	void			*start;
+	void			*end;
+	void			*ptr;
+	int			bytes;
+	unsigned int		fifo_bytes;
+};
+
+struct aaci {
+	struct amba_device	*dev;
+	struct snd_card		*card;
+	void			__iomem *base;
+	unsigned int		fifo_depth;
+	unsigned int		users;
+	struct mutex		irq_lock;
+
+	/* AC'97 */
+	struct mutex		ac97_sem;
+	struct snd_ac97_bus	*ac97_bus;
+	struct snd_ac97		*ac97;
+
+	u32			maincr;
+
+	struct aaci_runtime	playback;
+	struct aaci_runtime	capture;
+
+	struct snd_pcm		*pcm;
+};
+
+#define ACSTREAM_FRONT		0
+#define ACSTREAM_SURROUND	1
+#define ACSTREAM_LFE		2
+
+#endif
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
new file mode 100644
index 000000000..2ca33fd5a
--- /dev/null
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
+ * which contain:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/soc/pxa/cpu.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include <linux/platform_data/asoc-pxa.h>
+
+#include "pxa2xx-ac97-regs.h"
+
+static DEFINE_MUTEX(car_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
+static volatile long gsr_bits;
+static struct clk *ac97_clk;
+static struct clk *ac97conf_clk;
+static int reset_gpio;
+static void __iomem *ac97_reg_base;
+
+extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio);
+
+/*
+ * Beware PXA27x bugs:
+ *
+ *   o Slot 12 read from modem space will hang controller.
+ *   o CDONE, SDONE interrupt fails after any slot 12 IO.
+ *
+ * We therefore have an hybrid approach for waiting on SDONE (interrupt or
+ * 1 jiffy timeout if interrupt never comes).
+ */
+
+int pxa2xx_ac97_read(int slot, unsigned short reg)
+{
+	int val = -ENODEV;
+	u32 __iomem *reg_addr;
+
+	if (slot > 0)
+		return -ENODEV;
+
+	mutex_lock(&car_mutex);
+
+	/* set up primary or secondary codec space */
+	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
+		reg_addr = ac97_reg_base +
+			   (slot ? SMC_REG_BASE : PMC_REG_BASE);
+	else
+		reg_addr = ac97_reg_base +
+			   (slot ? SAC_REG_BASE : PAC_REG_BASE);
+	reg_addr += (reg >> 1);
+
+	/* start read access across the ac97 link */
+	writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR);
+	gsr_bits = 0;
+	val = (readl(reg_addr) & 0xffff);
+	if (reg == AC97_GPIO_STATUS)
+		goto out;
+	if (wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE, 1) <= 0 &&
+	    !((readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE)) {
+		printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
+				__func__, reg, readl(ac97_reg_base + GSR) | gsr_bits);
+		val = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* valid data now */
+	writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR);
+	gsr_bits = 0;
+	val = (readl(reg_addr) & 0xffff);
+	/* but we've just started another cycle... */
+	wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE, 1);
+
+out:	mutex_unlock(&car_mutex);
+	return val;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);
+
+int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val)
+{
+	u32 __iomem *reg_addr;
+	int ret = 0;
+
+	mutex_lock(&car_mutex);
+
+	/* set up primary or secondary codec space */
+	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
+		reg_addr = ac97_reg_base +
+			   (slot ? SMC_REG_BASE : PMC_REG_BASE);
+	else
+		reg_addr = ac97_reg_base +
+			   (slot ? SAC_REG_BASE : PAC_REG_BASE);
+	reg_addr += (reg >> 1);
+
+	writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR);
+	gsr_bits = 0;
+	writel(val, reg_addr);
+	if (wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_CDONE, 1) <= 0 &&
+	    !((readl(ac97_reg_base + GSR) | gsr_bits) & GSR_CDONE)) {
+		printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
+				__func__, reg, readl(ac97_reg_base + GSR) | gsr_bits);
+		ret = -EIO;
+	}
+
+	mutex_unlock(&car_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
+
+#ifdef CONFIG_PXA25x
+static inline void pxa_ac97_warm_pxa25x(void)
+{
+	gsr_bits = 0;
+
+	writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR);
+}
+
+static inline void pxa_ac97_cold_pxa25x(void)
+{
+	writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR);  /* clear everything but nCRST */
+	writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR);  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	writel(GCR_COLD_RST, ac97_reg_base + GCR);
+}
+#endif
+
+#ifdef CONFIG_PXA27x
+static inline void pxa_ac97_warm_pxa27x(void)
+{
+	gsr_bits = 0;
+
+	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
+	pxa27x_configure_ac97reset(reset_gpio, true);
+	udelay(10);
+	writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR);
+	pxa27x_configure_ac97reset(reset_gpio, false);
+	udelay(500);
+}
+
+static inline void pxa_ac97_cold_pxa27x(void)
+{
+	writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR);  /* clear everything but nCRST */
+	writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR);  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	/* PXA27x Developers Manual section 13.5.2.2.1 */
+	clk_prepare_enable(ac97conf_clk);
+	udelay(5);
+	clk_disable_unprepare(ac97conf_clk);
+	writel(GCR_COLD_RST | GCR_WARM_RST, ac97_reg_base + GCR);
+}
+#endif
+
+#ifdef CONFIG_PXA3xx
+static inline void pxa_ac97_warm_pxa3xx(void)
+{
+	gsr_bits = 0;
+
+	/* Can't use interrupts */
+	writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR);
+}
+
+static inline void pxa_ac97_cold_pxa3xx(void)
+{
+	/* Hold CLKBPB for 100us */
+	writel(0, ac97_reg_base + GCR);
+	writel(GCR_CLKBPB, ac97_reg_base + GCR);
+	udelay(100);
+	writel(0, ac97_reg_base + GCR);
+
+	writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR);  /* clear everything but nCRST */
+	writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR);  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	/* Can't use interrupts on PXA3xx */
+	writel(readl(ac97_reg_base + GCR) & (~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN)), ac97_reg_base + GCR);
+
+	writel(GCR_WARM_RST | GCR_COLD_RST, ac97_reg_base + GCR);
+}
+#endif
+
+bool pxa2xx_ac97_try_warm_reset(void)
+{
+	unsigned long gsr;
+	unsigned int timeout = 100;
+
+#ifdef CONFIG_PXA25x
+	if (cpu_is_pxa25x())
+		pxa_ac97_warm_pxa25x();
+	else
+#endif
+#ifdef CONFIG_PXA27x
+	if (cpu_is_pxa27x())
+		pxa_ac97_warm_pxa27x();
+	else
+#endif
+#ifdef CONFIG_PXA3xx
+	if (cpu_is_pxa3xx())
+		pxa_ac97_warm_pxa3xx();
+	else
+#endif
+		snd_BUG();
+
+	while (!((readl(ac97_reg_base + GSR) | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
+	gsr = readl(ac97_reg_base + GSR) | gsr_bits;
+	if (!(gsr & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
+				 __func__, gsr);
+
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
+
+bool pxa2xx_ac97_try_cold_reset(void)
+{
+	unsigned long gsr;
+	unsigned int timeout = 1000;
+
+#ifdef CONFIG_PXA25x
+	if (cpu_is_pxa25x())
+		pxa_ac97_cold_pxa25x();
+	else
+#endif
+#ifdef CONFIG_PXA27x
+	if (cpu_is_pxa27x())
+		pxa_ac97_cold_pxa27x();
+	else
+#endif
+#ifdef CONFIG_PXA3xx
+	if (cpu_is_pxa3xx())
+		pxa_ac97_cold_pxa3xx();
+	else
+#endif
+		snd_BUG();
+
+	while (!((readl(ac97_reg_base + GSR) | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
+	gsr = readl(ac97_reg_base + GSR) | gsr_bits;
+	if (!(gsr & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
+				 __func__, gsr);
+
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);
+
+
+void pxa2xx_ac97_finish_reset(void)
+{
+	u32 gcr = readl(ac97_reg_base + GCR);
+	gcr &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+	gcr |= GCR_SDONE_IE|GCR_CDONE_IE;
+	writel(gcr, ac97_reg_base + GCR);
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);
+
+static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
+{
+	long status;
+
+	status = readl(ac97_reg_base + GSR);
+	if (status) {
+		writel(status, ac97_reg_base + GSR);
+		gsr_bits |= status;
+		wake_up(&gsr_wq);
+
+		/* Although we don't use those we still need to clear them
+		   since they tend to spuriously trigger when MMC is used
+		   (hardware bug? go figure)... */
+		if (cpu_is_pxa27x()) {
+			writel(MISR_EOC, ac97_reg_base + MISR);
+			writel(PISR_EOC, ac97_reg_base + PISR);
+			writel(MCSR_EOC, ac97_reg_base + MCSR);
+		}
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+#ifdef CONFIG_PM
+int pxa2xx_ac97_hw_suspend(void)
+{
+	writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR);
+	clk_disable_unprepare(ac97_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
+
+int pxa2xx_ac97_hw_resume(void)
+{
+	clk_prepare_enable(ac97_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
+#endif
+
+int pxa2xx_ac97_hw_probe(struct platform_device *dev)
+{
+	int ret;
+	int irq;
+	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
+
+	ac97_reg_base = devm_platform_ioremap_resource(dev, 0);
+	if (IS_ERR(ac97_reg_base)) {
+		dev_err(&dev->dev, "Missing MMIO resource\n");
+		return PTR_ERR(ac97_reg_base);
+	}
+
+	if (pdata) {
+		switch (pdata->reset_gpio) {
+		case 95:
+		case 113:
+			reset_gpio = pdata->reset_gpio;
+			break;
+		case 0:
+			reset_gpio = 113;
+			break;
+		case -1:
+			break;
+		default:
+			dev_err(&dev->dev, "Invalid reset GPIO %d\n",
+				pdata->reset_gpio);
+		}
+	} else if (!pdata && dev->dev.of_node) {
+		pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+		pdata->reset_gpio = of_get_named_gpio(dev->dev.of_node,
+						      "reset-gpios", 0);
+		if (pdata->reset_gpio == -ENOENT)
+			pdata->reset_gpio = -1;
+		else if (pdata->reset_gpio < 0)
+			return pdata->reset_gpio;
+		reset_gpio = pdata->reset_gpio;
+	} else {
+		if (cpu_is_pxa27x())
+			reset_gpio = 113;
+	}
+
+	if (cpu_is_pxa27x()) {
+		/*
+		 * This gpio is needed for a work-around to a bug in the ac97
+		 * controller during warm reset.  The direction and level is set
+		 * here so that it is an output driven high when switching from
+		 * AC97_nRESET alt function to generic gpio.
+		 */
+		ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH,
+				       "pxa27x ac97 reset");
+		if (ret < 0) {
+			pr_err("%s: gpio_request_one() failed: %d\n",
+			       __func__, ret);
+			goto err_conf;
+		}
+		pxa27x_configure_ac97reset(reset_gpio, false);
+
+		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
+		if (IS_ERR(ac97conf_clk)) {
+			ret = PTR_ERR(ac97conf_clk);
+			ac97conf_clk = NULL;
+			goto err_conf;
+		}
+	}
+
+	ac97_clk = clk_get(&dev->dev, "AC97CLK");
+	if (IS_ERR(ac97_clk)) {
+		ret = PTR_ERR(ac97_clk);
+		ac97_clk = NULL;
+		goto err_clk;
+	}
+
+	ret = clk_prepare_enable(ac97_clk);
+	if (ret)
+		goto err_clk2;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_irq;
+	}
+
+	ret = request_irq(irq, pxa2xx_ac97_irq, 0, "AC97", NULL);
+	if (ret < 0)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+	writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR);
+err_clk2:
+	clk_put(ac97_clk);
+	ac97_clk = NULL;
+err_clk:
+	if (ac97conf_clk) {
+		clk_put(ac97conf_clk);
+		ac97conf_clk = NULL;
+	}
+err_conf:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
+
+void pxa2xx_ac97_hw_remove(struct platform_device *dev)
+{
+	if (cpu_is_pxa27x())
+		gpio_free(reset_gpio);
+	writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR);
+	free_irq(platform_get_irq(dev, 0), NULL);
+	if (ac97conf_clk) {
+		clk_put(ac97conf_clk);
+		ac97conf_clk = NULL;
+	}
+	clk_disable_unprepare(ac97_clk);
+	clk_put(ac97_clk);
+	ac97_clk = NULL;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);
+
+u32 pxa2xx_ac97_read_modr(void)
+{
+	if (!ac97_reg_base)
+		return 0;
+
+	return readl(ac97_reg_base + MODR);
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_read_modr);
+
+u32 pxa2xx_ac97_read_misr(void)
+{
+	if (!ac97_reg_base)
+		return 0;
+
+	return readl(ac97_reg_base + MISR);
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_read_misr);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/arm/pxa2xx-ac97-regs.h b/sound/arm/pxa2xx-ac97-regs.h
new file mode 100644
index 000000000..ae638a1b9
--- /dev/null
+++ b/sound/arm/pxa2xx-ac97-regs.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		(0x0000)  	/* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		(0x0004) 	/* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		(0x0008)  	/* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		(0x000C) 	 /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		(0x0010)  	/* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		(0x0014)  	/* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		(0x0018)  	/* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		(0x001C)  	/* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		(0x0020)  	/* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		(0x0040)  	/* PCM FIFO Data Register */
+#define MCDR		(0x0060)  	/* Mic-in FIFO Data Register */
+
+#define MOCR		(0x0100)  	/* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		(0x0108)  	/* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		(0x0110)  	/* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		(0x0118)  	/* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		(0x0140)  	/* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	(0x0200)  	/* Primary Audio Codec */
+#define SAC_REG_BASE	(0x0300)  	/* Secondary Audio Codec */
+#define PMC_REG_BASE	(0x0400)  	/* Primary Modem Codec */
+#define SMC_REG_BASE	(0x0500)  	/* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
new file mode 100644
index 000000000..c16208645
--- /dev/null
+++ b/sound/arm/pxa2xx-ac97.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/pxa2xx-lib.h>
+#include <sound/dmaengine_pcm.h>
+
+#include <linux/platform_data/asoc-pxa.h>
+
+static void pxa2xx_ac97_legacy_reset(struct snd_ac97 *ac97)
+{
+	if (!pxa2xx_ac97_try_cold_reset())
+		pxa2xx_ac97_try_warm_reset();
+
+	pxa2xx_ac97_finish_reset();
+}
+
+static unsigned short pxa2xx_ac97_legacy_read(struct snd_ac97 *ac97,
+					      unsigned short reg)
+{
+	int ret;
+
+	ret = pxa2xx_ac97_read(ac97->num, reg);
+	if (ret < 0)
+		return 0;
+	else
+		return (unsigned short)(ret & 0xffff);
+}
+
+static void pxa2xx_ac97_legacy_write(struct snd_ac97 *ac97,
+				     unsigned short reg, unsigned short val)
+{
+	pxa2xx_ac97_write(ac97->num, reg, val);
+}
+
+static const struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
+	.read	= pxa2xx_ac97_legacy_read,
+	.write	= pxa2xx_ac97_legacy_write,
+	.reset	= pxa2xx_ac97_legacy_reset,
+};
+
+static struct snd_pcm *pxa2xx_ac97_pcm;
+static struct snd_ac97 *pxa2xx_ac97_ac97;
+
+static int pxa2xx_ac97_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	pxa2xx_audio_ops_t *platform_ops;
+	int ret, i;
+
+	ret = pxa2xx_pcm_open(substream);
+	if (ret)
+		return ret;
+
+	runtime->hw.channels_min = 2;
+	runtime->hw.channels_max = 2;
+
+	i = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		AC97_RATES_FRONT_DAC : AC97_RATES_ADC;
+	runtime->hw.rates = pxa2xx_ac97_ac97->rates[i];
+	snd_pcm_limit_hw_rates(runtime);
+
+	platform_ops = substream->pcm->card->dev->platform_data;
+	if (platform_ops && platform_ops->startup) {
+		ret = platform_ops->startup(substream, platform_ops->priv);
+		if (ret < 0)
+			pxa2xx_pcm_close(substream);
+	}
+
+	return ret;
+}
+
+static int pxa2xx_ac97_pcm_close(struct snd_pcm_substream *substream)
+{
+	pxa2xx_audio_ops_t *platform_ops;
+
+	platform_ops = substream->pcm->card->dev->platform_data;
+	if (platform_ops && platform_ops->shutdown)
+		platform_ops->shutdown(substream, platform_ops->priv);
+
+	return 0;
+}
+
+static int pxa2xx_ac97_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int reg = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		  AC97_PCM_FRONT_DAC_RATE : AC97_PCM_LR_ADC_RATE;
+	int ret;
+
+	ret = pxa2xx_pcm_prepare(substream);
+	if (ret < 0)
+		return ret;
+
+	return snd_ac97_set_rate(pxa2xx_ac97_ac97, reg, runtime->rate);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int pxa2xx_ac97_do_suspend(struct snd_card *card)
+{
+	pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data;
+
+	snd_power_change_state(card, SNDRV_CTL_POWER_D3cold);
+	snd_ac97_suspend(pxa2xx_ac97_ac97);
+	if (platform_ops && platform_ops->suspend)
+		platform_ops->suspend(platform_ops->priv);
+
+	return pxa2xx_ac97_hw_suspend();
+}
+
+static int pxa2xx_ac97_do_resume(struct snd_card *card)
+{
+	pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data;
+	int rc;
+
+	rc = pxa2xx_ac97_hw_resume();
+	if (rc)
+		return rc;
+
+	if (platform_ops && platform_ops->resume)
+		platform_ops->resume(platform_ops->priv);
+	snd_ac97_resume(pxa2xx_ac97_ac97);
+	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+
+	return 0;
+}
+
+static int pxa2xx_ac97_suspend(struct device *dev)
+{
+	struct snd_card *card = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (card)
+		ret = pxa2xx_ac97_do_suspend(card);
+
+	return ret;
+}
+
+static int pxa2xx_ac97_resume(struct device *dev)
+{
+	struct snd_card *card = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (card)
+		ret = pxa2xx_ac97_do_resume(card);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(pxa2xx_ac97_pm_ops, pxa2xx_ac97_suspend, pxa2xx_ac97_resume);
+#endif
+
+static const struct snd_pcm_ops pxa2xx_ac97_pcm_ops = {
+	.open		= pxa2xx_ac97_pcm_open,
+	.close		= pxa2xx_ac97_pcm_close,
+	.hw_params	= pxa2xx_pcm_hw_params,
+	.prepare	= pxa2xx_ac97_pcm_prepare,
+	.trigger	= pxa2xx_pcm_trigger,
+	.pointer	= pxa2xx_pcm_pointer,
+};
+
+
+static int pxa2xx_ac97_pcm_new(struct snd_card *card)
+{
+	struct snd_pcm *pcm;
+	int ret;
+
+	ret = snd_pcm_new(card, "PXA2xx-PCM", 0, 1, 1, &pcm);
+	if (ret)
+		goto out;
+
+	ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto out;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &pxa2xx_ac97_pcm_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &pxa2xx_ac97_pcm_ops);
+	ret = pxa2xx_pcm_preallocate_dma_buffer(pcm);
+	if (ret)
+		goto out;
+
+	pxa2xx_ac97_pcm = pcm;
+	ret = 0;
+
+ out:
+	return ret;
+}
+
+static int pxa2xx_ac97_probe(struct platform_device *dev)
+{
+	struct snd_card *card;
+	struct snd_ac97_bus *ac97_bus;
+	struct snd_ac97_template ac97_template;
+	int ret;
+	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
+
+	if (dev->id >= 0) {
+		dev_err(&dev->dev, "PXA2xx has only one AC97 port.\n");
+		ret = -ENXIO;
+		goto err_dev;
+	}
+
+	ret = snd_card_new(&dev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			   THIS_MODULE, 0, &card);
+	if (ret < 0)
+		goto err;
+
+	strscpy(card->driver, dev->dev.driver->name, sizeof(card->driver));
+
+	ret = pxa2xx_ac97_pcm_new(card);
+	if (ret)
+		goto err;
+
+	ret = pxa2xx_ac97_hw_probe(dev);
+	if (ret)
+		goto err;
+
+	ret = snd_ac97_bus(card, 0, &pxa2xx_ac97_ops, NULL, &ac97_bus);
+	if (ret)
+		goto err_remove;
+	memset(&ac97_template, 0, sizeof(ac97_template));
+	ret = snd_ac97_mixer(ac97_bus, &ac97_template, &pxa2xx_ac97_ac97);
+	if (ret)
+		goto err_remove;
+
+	snprintf(card->shortname, sizeof(card->shortname),
+		 "%s", snd_ac97_get_short_name(pxa2xx_ac97_ac97));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s (%s)", dev->dev.driver->name, card->mixername);
+
+	if (pdata && pdata->codec_pdata[0])
+		snd_ac97_dev_add_pdata(ac97_bus->codec[0], pdata->codec_pdata[0]);
+	ret = snd_card_register(card);
+	if (ret == 0) {
+		platform_set_drvdata(dev, card);
+		return 0;
+	}
+
+err_remove:
+	pxa2xx_ac97_hw_remove(dev);
+err:
+	if (card)
+		snd_card_free(card);
+err_dev:
+	return ret;
+}
+
+static int pxa2xx_ac97_remove(struct platform_device *dev)
+{
+	struct snd_card *card = platform_get_drvdata(dev);
+
+	if (card) {
+		snd_card_free(card);
+		pxa2xx_ac97_hw_remove(dev);
+	}
+
+	return 0;
+}
+
+static struct platform_driver pxa2xx_ac97_driver = {
+	.probe		= pxa2xx_ac97_probe,
+	.remove		= pxa2xx_ac97_remove,
+	.driver		= {
+		.name	= "pxa2xx-ac97",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &pxa2xx_ac97_pm_ops,
+#endif
+	},
+};
+
+module_platform_driver(pxa2xx_ac97_driver);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-ac97");
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
new file mode 100644
index 000000000..0a48805e5
--- /dev/null
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/pxa2xx-lib.h>
+#include <sound/dmaengine_pcm.h>
+
+static const struct snd_pcm_hardware pxa2xx_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED |
+				  SNDRV_PCM_INFO_PAUSE |
+				  SNDRV_PCM_INFO_RESUME,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
+				  SNDRV_PCM_FMTBIT_S24_LE |
+				  SNDRV_PCM_FMTBIT_S32_LE,
+	.period_bytes_min	= 32,
+	.period_bytes_max	= 8192 - 32,
+	.periods_min		= 1,
+	.periods_max		= 256,
+	.buffer_bytes_max	= 128 * 1024,
+	.fifo_size		= 32,
+};
+
+int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	struct dma_chan *chan = snd_dmaengine_pcm_get_chan(substream);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_dmaengine_dai_dma_data *dma_params;
+	struct dma_slave_config config;
+	int ret;
+
+	dma_params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+	if (!dma_params)
+		return 0;
+
+	ret = snd_hwparams_to_dma_slave_config(substream, params, &config);
+	if (ret)
+		return ret;
+
+	snd_dmaengine_pcm_set_config_from_dai_data(substream,
+			snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream),
+			&config);
+
+	ret = dmaengine_slave_config(chan, &config);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL(pxa2xx_pcm_hw_params);
+
+int pxa2xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	return snd_dmaengine_pcm_trigger(substream, cmd);
+}
+EXPORT_SYMBOL(pxa2xx_pcm_trigger);
+
+snd_pcm_uframes_t
+pxa2xx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_pointer(substream);
+}
+EXPORT_SYMBOL(pxa2xx_pcm_pointer);
+
+int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+EXPORT_SYMBOL(pxa2xx_pcm_prepare);
+
+int pxa2xx_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_dmaengine_dai_dma_data *dma_params;
+	int ret;
+
+	runtime->hw = pxa2xx_pcm_hardware;
+
+	dma_params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+	if (!dma_params)
+		return 0;
+
+	/*
+	 * For mysterious reasons (and despite what the manual says)
+	 * playback samples are lost if the DMA count is not a multiple
+	 * of the DMA burst size.  Let's add a rule to enforce that.
+	 */
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+		SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32);
+	if (ret)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+		SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32);
+	if (ret)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+
+	return snd_dmaengine_pcm_open(
+		substream, dma_request_slave_channel(asoc_rtd_to_cpu(rtd, 0)->dev,
+						     dma_params->chan_name));
+}
+EXPORT_SYMBOL(pxa2xx_pcm_open);
+
+int pxa2xx_pcm_close(struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_close_release_chan(substream);
+}
+EXPORT_SYMBOL(pxa2xx_pcm_close);
+
+int pxa2xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm)
+{
+	size_t size = pxa2xx_pcm_hardware.buffer_bytes_max;
+
+	return snd_pcm_set_fixed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV_WC,
+					    pcm->card->dev, size);
+}
+EXPORT_SYMBOL(pxa2xx_pcm_preallocate_dma_buffer);
+
+int pxa2xx_soc_pcm_new(struct snd_soc_component *component,
+		       struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret;
+
+	ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	return pxa2xx_pcm_preallocate_dma_buffer(pcm);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_new);
+
+int pxa2xx_soc_pcm_open(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_open(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_open);
+
+int pxa2xx_soc_pcm_close(struct snd_soc_component *component,
+			 struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_close(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_close);
+
+int pxa2xx_soc_pcm_hw_params(struct snd_soc_component *component,
+			     struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params)
+{
+	return pxa2xx_pcm_hw_params(substream, params);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_hw_params);
+
+int pxa2xx_soc_pcm_prepare(struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_prepare(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_prepare);
+
+int pxa2xx_soc_pcm_trigger(struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream, int cmd)
+{
+	return pxa2xx_pcm_trigger(substream, cmd);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_trigger);
+
+snd_pcm_uframes_t
+pxa2xx_soc_pcm_pointer(struct snd_soc_component *component,
+		       struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_pointer(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_pointer);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel PXA2xx sound library");
+MODULE_LICENSE("GPL");