Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 433 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c
new file mode 100644
index 000000000..cc3c79387
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_3g.c
@@ -0,0 +1,433 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+
+/* These functions are common for all "3G" cards */
+
+
+static int check_asic_status(struct echoaudio *chip)
+{
+	u32 box_status;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED);
+	chip->asic_loaded = false;
+	clear_handshake(chip);
+	send_vector(chip, DSP_VC_TEST_ASIC);
+
+	if (wait_handshake(chip)) {
+		chip->dsp_code = NULL;
+		return -EIO;
+	}
+
+	box_status = le32_to_cpu(chip->comm_page->ext_box_status);
+	dev_dbg(chip->card->dev, "box_status=%x\n", box_status);
+	if (box_status == E3G_ASIC_NOT_LOADED)
+		return -ENODEV;
+
+	chip->asic_loaded = true;
+	return box_status & E3G_BOX_TYPE_MASK;
+}
+
+
+
+static inline u32 get_frq_reg(struct echoaudio *chip)
+{
+	return le32_to_cpu(chip->comm_page->e3g_frq_register);
+}
+
+
+
+/* Most configuration of 3G cards is accomplished by writing the control
+register. write_control_reg sends the new control register value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
+			     char force)
+{
+	__le32 ctl_reg, frq_reg;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	dev_dbg(chip->card->dev,
+		"WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq);
+
+	ctl_reg = cpu_to_le32(ctl);
+	frq_reg = cpu_to_le32(frq);
+
+	if (ctl_reg != chip->comm_page->control_register ||
+	    frq_reg != chip->comm_page->e3g_frq_register || force) {
+		chip->comm_page->e3g_frq_register = frq_reg;
+		chip->comm_page->control_register = ctl_reg;
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+	}
+
+	dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n");
+	return 0;
+}
+
+
+
+/* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u8 previous_mode;
+	int err, i, o;
+
+	/* All audio channels must be closed before changing the digital mode */
+	if (snd_BUG_ON(chip->pipe_alloc_mask))
+		return -EAGAIN;
+
+	if (snd_BUG_ON(!(chip->digital_modes & (1 << mode))))
+		return -EINVAL;
+
+	previous_mode = chip->digital_mode;
+	err = dsp_set_digital_mode(chip, mode);
+
+	/* If we successfully changed the digital mode from or to ADAT,
+	 * then make sure all output, input and monitor levels are
+	 * updated by the DSP comm object. */
+	if (err >= 0 && previous_mode != mode &&
+	    (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+		spin_lock_irq(&chip->lock);
+		for (o = 0; o < num_busses_out(chip); o++)
+			for (i = 0; i < num_busses_in(chip); i++)
+				set_monitor_gain(chip, o, i,
+						 chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+		for (i = 0; i < num_busses_in(chip); i++)
+			set_input_gain(chip, i, chip->input_gain[i]);
+		update_input_line_level(chip);
+#endif
+
+		for (o = 0; o < num_busses_out(chip); o++)
+			set_output_gain(chip, o, chip->output_gain[o]);
+		update_output_line_level(chip);
+		spin_unlock_irq(&chip->lock);
+	}
+
+	return err;
+}
+
+
+
+static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate)
+{
+	control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK;
+
+	switch (rate) {
+	case 32000 :
+		control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100 :
+		if (chip->professional_spdif)
+			control_reg |= E3G_SPDIF_SAMPLE_RATE0;
+		break;
+	case 48000 :
+		control_reg |= E3G_SPDIF_SAMPLE_RATE1;
+		break;
+	}
+
+	if (chip->professional_spdif)
+		control_reg |= E3G_SPDIF_PRO_MODE;
+
+	if (chip->non_audio_spdif)
+		control_reg |= E3G_SPDIF_NOT_AUDIO;
+
+	control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL |
+		E3G_SPDIF_COPY_PERMIT;
+
+	return control_reg;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	u32 control_reg;
+
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	chip->professional_spdif = prof;
+	control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate);
+	return write_control_reg(chip, control_reg, get_frq_reg(chip), 0);
+}
+
+
+
+/* detect_input_clocks() returns a bitmask consisting of all the input clocks
+currently connected to the hardware; this changes as the user connects and
+disconnects clock inputs. You should use this information to determine which
+clocks the user is allowed to select. */
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	 * detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD)
+		clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+	switch(chip->digital_mode) {
+	case DIGITAL_MODE_SPDIF_RCA:
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF)
+			clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT)
+			clock_bits |= ECHO_CLOCK_BIT_ADAT;
+		break;
+	}
+
+	return clock_bits;
+}
+
+
+
+static int load_asic(struct echoaudio *chip)
+{
+	int box_type, err;
+
+	if (chip->asic_loaded)
+		return 0;
+
+	/* Give the DSP a few milliseconds to settle down */
+	mdelay(2);
+
+	err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = FW_3G_ASIC;
+
+	/* Now give the new ASIC some time to set up */
+	msleep(1000);
+	/* See if it worked */
+	box_type = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	 * 48 kHz, internal clock, S/PDIF RCA mode */
+	if (box_type >= 0) {
+		err = write_control_reg(chip, E3G_48KHZ,
+					E3G_FREQ_REG_DEFAULT, true);
+		if (err < 0)
+			return err;
+	}
+
+	return box_type;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock, base_rate, frq_reg;
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		set_input_clock(chip, chip->input_clock);
+		return 0;
+	}
+
+	if (snd_BUG_ON(rate >= 50000 &&
+		       chip->digital_mode == DIGITAL_MODE_ADAT))
+		return -EINVAL;
+
+	clock = 0;
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= E3G_CLOCK_CLEAR_MASK;
+
+	switch (rate) {
+	case 96000:
+		clock = E3G_96KHZ;
+		break;
+	case 88200:
+		clock = E3G_88KHZ;
+		break;
+	case 48000:
+		clock = E3G_48KHZ;
+		break;
+	case 44100:
+		clock = E3G_44KHZ;
+		break;
+	case 32000:
+		clock = E3G_32KHZ;
+		break;
+	default:
+		clock = E3G_CONTINUOUS_CLOCK;
+		if (rate > 50000)
+			clock |= E3G_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	control_reg |= clock;
+	control_reg = set_spdif_bits(chip, control_reg, rate);
+
+	base_rate = rate;
+	if (base_rate > 50000)
+		base_rate /= 2;
+	if (base_rate < 32000)
+		base_rate = 32000;
+
+	frq_reg = E3G_MAGIC_NUMBER / base_rate - 2;
+	if (frq_reg > E3G_FREQ_REG_MAX)
+		frq_reg = E3G_FREQ_REG_MAX;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+	chip->sample_rate = rate;
+	dev_dbg(chip->card->dev,
+		"SetSampleRate: %d clock %x\n", rate, control_reg);
+
+	/* Tell the DSP about it - DSP reads both control reg & freq reg */
+	return write_control_reg(chip, control_reg, frq_reg, 0);
+}
+
+
+
+/* Set the sample clock source to internal, S/PDIF, ADAT */
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		E3G_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= E3G_SPDIF_CLOCK;
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96)
+			control_reg |= E3G_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ADAT:
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= E3G_ADAT_CLOCK;
+		control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_WORD:
+		control_reg |= E3G_WORD_CLOCK;
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96)
+			control_reg |= E3G_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Echo3G\n", clock);
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = false;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = true;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = true;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Digital mode not supported: %d\n", mode);
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&chip->lock);
+
+	if (incompatible_clock) {
+		chip->sample_rate = 48000;
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+	}
+
+	/* Clear the current digital mode */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK;
+
+	/* Tweak the control reg */
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= E3G_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* E3G_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		control_reg |= E3G_ADAT_MODE;
+		control_reg &= ~E3G_DOUBLE_SPEED_MODE;	/* @@ useless */
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode);
+	return incompatible_clock;
+}