diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /sound/pci/ice1712/se.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'sound/pci/ice1712/se.c')
-rw-r--r-- | sound/pci/ice1712/se.c | 752 |
1 files changed, 752 insertions, 0 deletions
diff --git a/sound/pci/ice1712/se.c b/sound/pci/ice1712/se.c new file mode 100644 index 000000000..ffa9d8860 --- /dev/null +++ b/sound/pci/ice1712/se.c @@ -0,0 +1,752 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ALSA driver for ICEnsemble VT1724 (Envy24HT) + * + * Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI + * + * Copyright (c) 2007 Shin-ya Okada sh_okada(at)d4.dion.ne.jp + * (at) -> @ + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/tlv.h> + +#include "ice1712.h" +#include "envy24ht.h" +#include "se.h" + +struct se_spec { + struct { + unsigned char ch1, ch2; + } vol[8]; +}; + +/****************************************************************************/ +/* ONKYO WAVIO SE-200PCI */ +/****************************************************************************/ +/* + * system configuration ICE_EEP2_SYSCONF=0x4b + * XIN1 49.152MHz + * not have UART + * one stereo ADC and a S/PDIF receiver connected + * four stereo DACs connected + * + * AC-Link configuration ICE_EEP2_ACLINK=0x80 + * use I2C, not use AC97 + * + * I2S converters feature ICE_EEP2_I2S=0x78 + * I2S codec has no volume/mute control feature + * I2S codec supports 96KHz and 192KHz + * I2S codec 24bits + * + * S/PDIF configuration ICE_EEP2_SPDIF=0xc3 + * Enable integrated S/PDIF transmitter + * internal S/PDIF out implemented + * S/PDIF is stereo + * External S/PDIF out implemented + * + * + * ** connected chips ** + * + * WM8740 + * A 2ch-DAC of main outputs. + * It setuped as I2S mode by wire, so no way to setup from software. + * The sample-rate are automatically changed. + * ML/I2S (28pin) --------+ + * MC/DM1 (27pin) -- 5V | + * MD/DM0 (26pin) -- GND | + * MUTEB (25pin) -- NC | + * MODE (24pin) -- GND | + * CSBIW (23pin) --------+ + * | + * RSTB (22pin) --R(1K)-+ + * Probably it reduce the noise from the control line. + * + * WM8766 + * A 6ch-DAC for surrounds. + * It's control wire was connected to GPIOxx (3-wire serial interface) + * ML/I2S (11pin) -- GPIO18 + * MC/IWL (12pin) -- GPIO17 + * MD/DM (13pin) -- GPIO16 + * MUTE (14pin) -- GPIO01 + * + * WM8776 + * A 2ch-ADC(with 10ch-selector) plus 2ch-DAC. + * It's control wire was connected to SDA/SCLK (2-wire serial interface) + * MODE (16pin) -- R(1K) -- GND + * CE (17pin) -- R(1K) -- GND 2-wire mode (address=0x34) + * DI (18pin) -- SDA + * CL (19pin) -- SCLK + * + * + * ** output pins and device names ** + * + * 7.1ch name -- output connector color -- device (-D option) + * + * FRONT 2ch -- green -- plughw:0,0 + * CENTER(Lch) SUBWOOFER(Rch) -- black -- plughw:0,2,0 + * SURROUND 2ch -- orange -- plughw:0,2,1 + * SURROUND BACK 2ch -- white -- plughw:0,2,2 + * + */ + + +/****************************************************************************/ +/* WM8740 interface */ +/****************************************************************************/ + +static void se200pci_WM8740_init(struct snd_ice1712 *ice) +{ + /* nothing to do */ +} + + +static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice, + unsigned int rate) +{ + /* nothing to do */ +} + + +/****************************************************************************/ +/* WM8766 interface */ +/****************************************************************************/ + +static void se200pci_WM8766_write(struct snd_ice1712 *ice, + unsigned int addr, unsigned int data) +{ + unsigned int st; + unsigned int bits; + int i; + const unsigned int DATA = 0x010000; + const unsigned int CLOCK = 0x020000; + const unsigned int LOAD = 0x040000; + const unsigned int ALL_MASK = (DATA | CLOCK | LOAD); + + snd_ice1712_save_gpio_status(ice); + + st = ((addr & 0x7f) << 9) | (data & 0x1ff); + snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK); + snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK); + bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK; + + snd_ice1712_gpio_write(ice, bits); + for (i = 0; i < 16; i++) { + udelay(1); + bits &= ~CLOCK; + st = (st << 1); + if (st & 0x10000) + bits |= DATA; + else + bits &= ~DATA; + + snd_ice1712_gpio_write(ice, bits); + + udelay(1); + bits |= CLOCK; + snd_ice1712_gpio_write(ice, bits); + } + + udelay(1); + bits |= LOAD; + snd_ice1712_gpio_write(ice, bits); + + udelay(1); + bits |= (DATA | CLOCK); + snd_ice1712_gpio_write(ice, bits); + + snd_ice1712_restore_gpio_status(ice); +} + +static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch, + unsigned int vol1, unsigned int vol2) +{ + switch (ch) { + case 0: + se200pci_WM8766_write(ice, 0x000, vol1); + se200pci_WM8766_write(ice, 0x001, vol2 | 0x100); + break; + case 1: + se200pci_WM8766_write(ice, 0x004, vol1); + se200pci_WM8766_write(ice, 0x005, vol2 | 0x100); + break; + case 2: + se200pci_WM8766_write(ice, 0x006, vol1); + se200pci_WM8766_write(ice, 0x007, vol2 | 0x100); + break; + } +} + +static void se200pci_WM8766_init(struct snd_ice1712 *ice) +{ + se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */ + udelay(10); + + se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */ + se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */ + se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */ + + se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */ + se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */ + se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */ + se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */ + se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */ + + se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */ + se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */ +} + +static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice, + unsigned int rate) +{ + if (rate > 96000) + se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */ + else + se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */ +} + + +/****************************************************************************/ +/* WM8776 interface */ +/****************************************************************************/ + +static void se200pci_WM8776_write(struct snd_ice1712 *ice, + unsigned int addr, unsigned int data) +{ + unsigned int val; + + val = (addr << 9) | data; + snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff); +} + + +static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice, + unsigned int vol1, unsigned int vol2) +{ + se200pci_WM8776_write(ice, 0x03, vol1); + se200pci_WM8776_write(ice, 0x04, vol2 | 0x100); +} + +static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice, + unsigned int vol1, unsigned int vol2) +{ + se200pci_WM8776_write(ice, 0x0e, vol1); + se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100); +} + +static const char * const se200pci_sel[] = { + "LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL +}; + +static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice, + unsigned int sel) +{ + static const unsigned char vals[] = { + /* LINE, CD, MIC, ALL, GND */ + 0x10, 0x04, 0x08, 0x1c, 0x03 + }; + if (sel > 4) + sel = 4; + se200pci_WM8776_write(ice, 0x15, vals[sel]); +} + +static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl) +{ + /* AFL -- After Fader Listening */ + if (afl) + se200pci_WM8776_write(ice, 0x16, 0x005); + else + se200pci_WM8776_write(ice, 0x16, 0x001); +} + +static const char * const se200pci_agc[] = { + "Off", "LimiterMode", "ALCMode", NULL +}; + +static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc) +{ + /* AGC -- Auto Gain Control of the input */ + switch (agc) { + case 0: + se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */ + break; + case 1: + se200pci_WM8776_write(ice, 0x10, 0x07b); + se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */ + break; + case 2: + se200pci_WM8776_write(ice, 0x10, 0x1fb); + se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */ + break; + } +} + +static void se200pci_WM8776_init(struct snd_ice1712 *ice) +{ + int i; + static const unsigned short default_values[] = { + 0x100, 0x100, 0x100, + 0x100, 0x100, 0x100, + 0x000, 0x090, 0x000, 0x000, + 0x022, 0x022, 0x022, + 0x008, 0x0cf, 0x0cf, 0x07b, 0x000, + 0x032, 0x000, 0x0a6, 0x001, 0x001 + }; + + se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */ + /* ADC and DAC interface is I2S 24bits mode */ + /* The sample-rate are automatically changed */ + udelay(10); + /* BUT my board can not do reset all, so I load all by manually. */ + for (i = 0; i < ARRAY_SIZE(default_values); i++) + se200pci_WM8776_write(ice, i, default_values[i]); + + se200pci_WM8776_set_input_selector(ice, 0); + se200pci_WM8776_set_afl(ice, 0); + se200pci_WM8776_set_agc(ice, 0); + se200pci_WM8776_set_input_volume(ice, 0, 0); + se200pci_WM8776_set_output_volume(ice, 0, 0); + + /* head phone mute and power down */ + se200pci_WM8776_write(ice, 0x00, 0); + se200pci_WM8776_write(ice, 0x01, 0); + se200pci_WM8776_write(ice, 0x02, 0x100); + se200pci_WM8776_write(ice, 0x0d, 0x080); +} + +static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice, + unsigned int rate) +{ + /* nothing to do */ +} + + +/****************************************************************************/ +/* runtime interface */ +/****************************************************************************/ + +static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate) +{ + se200pci_WM8740_set_pro_rate(ice, rate); + se200pci_WM8766_set_pro_rate(ice, rate); + se200pci_WM8776_set_pro_rate(ice, rate); +} + +struct se200pci_control { + const char *name; + enum { + WM8766, + WM8776in, + WM8776out, + WM8776sel, + WM8776agc, + WM8776afl + } target; + enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type; + int ch; + const char * const *member; + const char *comment; +}; + +static const struct se200pci_control se200pci_cont[] = { + { + .name = "Front Playback Volume", + .target = WM8776out, + .type = VOLUME1, + .comment = "Front(green)" + }, + { + .name = "Side Playback Volume", + .target = WM8766, + .type = VOLUME1, + .ch = 1, + .comment = "Surround(orange)" + }, + { + .name = "Surround Playback Volume", + .target = WM8766, + .type = VOLUME1, + .ch = 2, + .comment = "SurroundBack(white)" + }, + { + .name = "CLFE Playback Volume", + .target = WM8766, + .type = VOLUME1, + .ch = 0, + .comment = "Center(Lch)&SubWoofer(Rch)(black)" + }, + { + .name = "Capture Volume", + .target = WM8776in, + .type = VOLUME2 + }, + { + .name = "Capture Select", + .target = WM8776sel, + .type = ENUM, + .member = se200pci_sel + }, + { + .name = "AGC Capture Mode", + .target = WM8776agc, + .type = ENUM, + .member = se200pci_agc + }, + { + .name = "AFL Bypass Playback Switch", + .target = WM8776afl, + .type = BOOLEAN + } +}; + +static int se200pci_get_enum_count(int n) +{ + const char * const *member; + int c; + + member = se200pci_cont[n].member; + if (!member) + return 0; + for (c = 0; member[c]; c++) + ; + return c; +} + +static int se200pci_cont_volume_info(struct snd_kcontrol *kc, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; /* mute */ + uinfo->value.integer.max = 0xff; /* 0dB */ + return 0; +} + +#define se200pci_cont_boolean_info snd_ctl_boolean_mono_info + +static int se200pci_cont_enum_info(struct snd_kcontrol *kc, + struct snd_ctl_elem_info *uinfo) +{ + int n, c; + + n = kc->private_value; + c = se200pci_get_enum_count(n); + if (!c) + return -EINVAL; + return snd_ctl_enum_info(uinfo, 1, c, se200pci_cont[n].member); +} + +static int se200pci_cont_volume_get(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice = snd_kcontrol_chip(kc); + struct se_spec *spec = ice->spec; + int n = kc->private_value; + uc->value.integer.value[0] = spec->vol[n].ch1; + uc->value.integer.value[1] = spec->vol[n].ch2; + return 0; +} + +static int se200pci_cont_boolean_get(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice = snd_kcontrol_chip(kc); + struct se_spec *spec = ice->spec; + int n = kc->private_value; + uc->value.integer.value[0] = spec->vol[n].ch1; + return 0; +} + +static int se200pci_cont_enum_get(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice = snd_kcontrol_chip(kc); + struct se_spec *spec = ice->spec; + int n = kc->private_value; + uc->value.enumerated.item[0] = spec->vol[n].ch1; + return 0; +} + +static void se200pci_cont_update(struct snd_ice1712 *ice, int n) +{ + struct se_spec *spec = ice->spec; + switch (se200pci_cont[n].target) { + case WM8766: + se200pci_WM8766_set_volume(ice, + se200pci_cont[n].ch, + spec->vol[n].ch1, + spec->vol[n].ch2); + break; + + case WM8776in: + se200pci_WM8776_set_input_volume(ice, + spec->vol[n].ch1, + spec->vol[n].ch2); + break; + + case WM8776out: + se200pci_WM8776_set_output_volume(ice, + spec->vol[n].ch1, + spec->vol[n].ch2); + break; + + case WM8776sel: + se200pci_WM8776_set_input_selector(ice, + spec->vol[n].ch1); + break; + + case WM8776agc: + se200pci_WM8776_set_agc(ice, spec->vol[n].ch1); + break; + + case WM8776afl: + se200pci_WM8776_set_afl(ice, spec->vol[n].ch1); + break; + + default: + break; + } +} + +static int se200pci_cont_volume_put(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice = snd_kcontrol_chip(kc); + struct se_spec *spec = ice->spec; + int n = kc->private_value; + unsigned int vol1, vol2; + int changed; + + changed = 0; + vol1 = uc->value.integer.value[0] & 0xff; + vol2 = uc->value.integer.value[1] & 0xff; + if (spec->vol[n].ch1 != vol1) { + spec->vol[n].ch1 = vol1; + changed = 1; + } + if (spec->vol[n].ch2 != vol2) { + spec->vol[n].ch2 = vol2; + changed = 1; + } + if (changed) + se200pci_cont_update(ice, n); + + return changed; +} + +static int se200pci_cont_boolean_put(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice = snd_kcontrol_chip(kc); + struct se_spec *spec = ice->spec; + int n = kc->private_value; + unsigned int vol1; + + vol1 = !!uc->value.integer.value[0]; + if (spec->vol[n].ch1 != vol1) { + spec->vol[n].ch1 = vol1; + se200pci_cont_update(ice, n); + return 1; + } + return 0; +} + +static int se200pci_cont_enum_put(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *uc) +{ + struct snd_ice1712 *ice = snd_kcontrol_chip(kc); + struct se_spec *spec = ice->spec; + int n = kc->private_value; + unsigned int vol1; + + vol1 = uc->value.enumerated.item[0]; + if (vol1 >= se200pci_get_enum_count(n)) + return -EINVAL; + if (spec->vol[n].ch1 != vol1) { + spec->vol[n].ch1 = vol1; + se200pci_cont_update(ice, n); + return 1; + } + return 0; +} + +static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1); + +static int se200pci_add_controls(struct snd_ice1712 *ice) +{ + int i; + struct snd_kcontrol_new cont; + int err; + + memset(&cont, 0, sizeof(cont)); + cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) { + cont.private_value = i; + cont.name = se200pci_cont[i].name; + cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE; + cont.tlv.p = NULL; + switch (se200pci_cont[i].type) { + case VOLUME1: + case VOLUME2: + cont.info = se200pci_cont_volume_info; + cont.get = se200pci_cont_volume_get; + cont.put = se200pci_cont_volume_put; + cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ; + if (se200pci_cont[i].type == VOLUME1) + cont.tlv.p = db_scale_gain1; + else + cont.tlv.p = db_scale_gain2; + break; + case BOOLEAN: + cont.info = se200pci_cont_boolean_info; + cont.get = se200pci_cont_boolean_get; + cont.put = se200pci_cont_boolean_put; + break; + case ENUM: + cont.info = se200pci_cont_enum_info; + cont.get = se200pci_cont_enum_get; + cont.put = se200pci_cont_enum_put; + break; + default: + snd_BUG(); + return -EINVAL; + } + err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice)); + if (err < 0) + return err; + } + + return 0; +} + + +/****************************************************************************/ +/* ONKYO WAVIO SE-90PCI */ +/****************************************************************************/ +/* + * system configuration ICE_EEP2_SYSCONF=0x4b + * AC-Link configuration ICE_EEP2_ACLINK=0x80 + * I2S converters feature ICE_EEP2_I2S=0x78 + * S/PDIF configuration ICE_EEP2_SPDIF=0xc3 + * + * ** connected chip ** + * + * WM8716 + * A 2ch-DAC of main outputs. + * It setuped as I2S mode by wire, so no way to setup from software. + * ML/I2S (28pin) -- +5V + * MC/DM1 (27pin) -- GND + * MC/DM0 (26pin) -- GND + * MUTEB (25pin) -- open (internal pull-up) + * MODE (24pin) -- GND + * CSBIWO (23pin) -- +5V + * + */ + + /* Nothing to do for this chip. */ + + +/****************************************************************************/ +/* probe/initialize/setup */ +/****************************************************************************/ + +static int se_init(struct snd_ice1712 *ice) +{ + struct se_spec *spec; + + spec = kzalloc(sizeof(*spec), GFP_KERNEL); + if (!spec) + return -ENOMEM; + ice->spec = spec; + + if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) { + ice->num_total_dacs = 2; + ice->num_total_adcs = 0; + ice->vt1720 = 1; + return 0; + + } else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) { + ice->num_total_dacs = 8; + ice->num_total_adcs = 2; + se200pci_WM8740_init(ice); + se200pci_WM8766_init(ice); + se200pci_WM8776_init(ice); + ice->gpio.set_pro_rate = se200pci_set_pro_rate; + return 0; + } + + return -ENOENT; +} + +static int se_add_controls(struct snd_ice1712 *ice) +{ + int err; + + err = 0; + /* nothing to do for VT1724_SUBDEVICE_SE90PCI */ + if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) + err = se200pci_add_controls(ice); + + return err; +} + + +/****************************************************************************/ +/* entry point */ +/****************************************************************************/ + +static const unsigned char se200pci_eeprom[] = { + [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */ + [ICE_EEP2_ACLINK] = 0x80, /* I2S */ + [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */ + [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */ + + [ICE_EEP2_GPIO_DIR] = 0x02, /* WM8766 mute 1=output */ + [ICE_EEP2_GPIO_DIR1] = 0x00, /* not used */ + [ICE_EEP2_GPIO_DIR2] = 0x07, /* WM8766 ML/MC/MD 1=output */ + + [ICE_EEP2_GPIO_MASK] = 0x00, /* 0=writable */ + [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0=writable */ + [ICE_EEP2_GPIO_MASK2] = 0x00, /* 0=writable */ + + [ICE_EEP2_GPIO_STATE] = 0x00, /* WM8766 mute=0 */ + [ICE_EEP2_GPIO_STATE1] = 0x00, /* not used */ + [ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */ +}; + +static const unsigned char se90pci_eeprom[] = { + [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */ + [ICE_EEP2_ACLINK] = 0x80, /* I2S */ + [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */ + [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */ + + /* ALL GPIO bits are in input mode */ +}; + +struct snd_ice1712_card_info snd_vt1724_se_cards[] = { + { + .subvendor = VT1724_SUBDEVICE_SE200PCI, + .name = "ONKYO SE200PCI", + .model = "se200pci", + .chip_init = se_init, + .build_controls = se_add_controls, + .eeprom_size = sizeof(se200pci_eeprom), + .eeprom_data = se200pci_eeprom, + }, + { + .subvendor = VT1724_SUBDEVICE_SE90PCI, + .name = "ONKYO SE90PCI", + .model = "se90pci", + .chip_init = se_init, + .build_controls = se_add_controls, + .eeprom_size = sizeof(se90pci_eeprom), + .eeprom_data = se90pci_eeprom, + }, + {} /*terminator*/ +}; |