Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1404 insertions, 0 deletions

diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
new file mode 100644
index 000000000..fabe39360
--- /dev/null
+++ b/sound/pci/sis7019.c
@@ -0,0 +1,1404 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Driver for SiS7019 Audio Accelerator
+ *
+ *  Copyright (C) 2004-2007, David Dillow
+ *  Written by David Dillow <dave@thedillows.org>
+ *  Inspired by the Trident 4D-WaveDX/NX driver.
+ *
+ *  All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/time.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include "sis7019.h"
+
+MODULE_AUTHOR("David Dillow <dave@thedillows.org>");
+MODULE_DESCRIPTION("SiS7019");
+MODULE_LICENSE("GPL");
+
+static int index = SNDRV_DEFAULT_IDX1;	/* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1;	/* ID for this card */
+static bool enable = 1;
+static int codecs = 1;
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator.");
+module_param(enable, bool, 0444);
+MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator.");
+module_param(codecs, int, 0444);
+MODULE_PARM_DESC(codecs, "Set bit to indicate that codec number is expected to be present (default 1)");
+
+static const struct pci_device_id snd_sis7019_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, snd_sis7019_ids);
+
+/* There are three timing modes for the voices.
+ *
+ * For both playback and capture, when the buffer is one or two periods long,
+ * we use the hardware's built-in Mid-Loop Interrupt and End-Loop Interrupt
+ * to let us know when the periods have ended.
+ *
+ * When performing playback with more than two periods per buffer, we set
+ * the "Stop Sample Offset" and tell the hardware to interrupt us when we
+ * reach it. We then update the offset and continue on until we are
+ * interrupted for the next period.
+ *
+ * Capture channels do not have a SSO, so we allocate a playback channel to
+ * use as a timer for the capture periods. We use the SSO on the playback
+ * channel to clock out virtual periods, and adjust the virtual period length
+ * to maintain synchronization. This algorithm came from the Trident driver.
+ *
+ * FIXME: It'd be nice to make use of some of the synth features in the
+ * hardware, but a woeful lack of documentation is a significant roadblock.
+ */
+struct voice {
+	u16 flags;
+#define 	VOICE_IN_USE		1
+#define 	VOICE_CAPTURE		2
+#define 	VOICE_SSO_TIMING	4
+#define 	VOICE_SYNC_TIMING	8
+	u16 sync_cso;
+	u16 period_size;
+	u16 buffer_size;
+	u16 sync_period_size;
+	u16 sync_buffer_size;
+	u32 sso;
+	u32 vperiod;
+	struct snd_pcm_substream *substream;
+	struct voice *timing;
+	void __iomem *ctrl_base;
+	void __iomem *wave_base;
+	void __iomem *sync_base;
+	int num;
+};
+
+/* We need four pages to store our wave parameters during a suspend. If
+ * we're not doing power management, we still need to allocate a page
+ * for the silence buffer.
+ */
+#ifdef CONFIG_PM_SLEEP
+#define SIS_SUSPEND_PAGES	4
+#else
+#define SIS_SUSPEND_PAGES	1
+#endif
+
+struct sis7019 {
+	unsigned long ioport;
+	void __iomem *ioaddr;
+	int irq;
+	int codecs_present;
+
+	struct pci_dev *pci;
+	struct snd_pcm *pcm;
+	struct snd_card *card;
+	struct snd_ac97 *ac97[3];
+
+	/* Protect against more than one thread hitting the AC97
+	 * registers (in a more polite manner than pounding the hardware
+	 * semaphore)
+	 */
+	struct mutex ac97_mutex;
+
+	/* voice_lock protects allocation/freeing of the voice descriptions
+	 */
+	spinlock_t voice_lock;
+
+	struct voice voices[64];
+	struct voice capture_voice;
+
+	/* Allocate pages to store the internal wave state during
+	 * suspends. When we're operating, this can be used as a silence
+	 * buffer for a timing channel.
+	 */
+	void *suspend_state[SIS_SUSPEND_PAGES];
+
+	int silence_users;
+	dma_addr_t silence_dma_addr;
+};
+
+/* These values are also used by the module param 'codecs' to indicate
+ * which codecs should be present.
+ */
+#define SIS_PRIMARY_CODEC_PRESENT	0x0001
+#define SIS_SECONDARY_CODEC_PRESENT	0x0002
+#define SIS_TERTIARY_CODEC_PRESENT	0x0004
+
+/* The HW offset parameters (Loop End, Stop Sample, End Sample) have a
+ * documented range of 8-0xfff8 samples. Given that they are 0-based,
+ * that places our period/buffer range at 9-0xfff9 samples. That makes the
+ * max buffer size 0xfff9 samples * 2 channels * 2 bytes per sample, and
+ * max samples / min samples gives us the max periods in a buffer.
+ *
+ * We'll add a constraint upon open that limits the period and buffer sample
+ * size to values that are legal for the hardware.
+ */
+static const struct snd_pcm_hardware sis_playback_hw_info = {
+	.info = (SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_SYNC_START |
+		 SNDRV_PCM_INFO_RESUME),
+	.formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 |
+		    SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE),
+	.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min = 4000,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.buffer_bytes_max = (0xfff9 * 4),
+	.period_bytes_min = 9,
+	.period_bytes_max = (0xfff9 * 4),
+	.periods_min = 1,
+	.periods_max = (0xfff9 / 9),
+};
+
+static const struct snd_pcm_hardware sis_capture_hw_info = {
+	.info = (SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_SYNC_START |
+		 SNDRV_PCM_INFO_RESUME),
+	.formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 |
+		    SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE),
+	.rates = SNDRV_PCM_RATE_48000,
+	.rate_min = 4000,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.buffer_bytes_max = (0xfff9 * 4),
+	.period_bytes_min = 9,
+	.period_bytes_max = (0xfff9 * 4),
+	.periods_min = 1,
+	.periods_max = (0xfff9 / 9),
+};
+
+static void sis_update_sso(struct voice *voice, u16 period)
+{
+	void __iomem *base = voice->ctrl_base;
+
+	voice->sso += period;
+	if (voice->sso >= voice->buffer_size)
+		voice->sso -= voice->buffer_size;
+
+	/* Enforce the documented hardware minimum offset */
+	if (voice->sso < 8)
+		voice->sso = 8;
+
+	/* The SSO is in the upper 16 bits of the register. */
+	writew(voice->sso & 0xffff, base + SIS_PLAY_DMA_SSO_ESO + 2);
+}
+
+static void sis_update_voice(struct voice *voice)
+{
+	if (voice->flags & VOICE_SSO_TIMING) {
+		sis_update_sso(voice, voice->period_size);
+	} else if (voice->flags & VOICE_SYNC_TIMING) {
+		int sync;
+
+		/* If we've not hit the end of the virtual period, update
+		 * our records and keep going.
+		 */
+		if (voice->vperiod > voice->period_size) {
+			voice->vperiod -= voice->period_size;
+			if (voice->vperiod < voice->period_size)
+				sis_update_sso(voice, voice->vperiod);
+			else
+				sis_update_sso(voice, voice->period_size);
+			return;
+		}
+
+		/* Calculate our relative offset between the target and
+		 * the actual CSO value. Since we're operating in a loop,
+		 * if the value is more than half way around, we can
+		 * consider ourselves wrapped.
+		 */
+		sync = voice->sync_cso;
+		sync -= readw(voice->sync_base + SIS_CAPTURE_DMA_FORMAT_CSO);
+		if (sync > (voice->sync_buffer_size / 2))
+			sync -= voice->sync_buffer_size;
+
+		/* If sync is positive, then we interrupted too early, and
+		 * we'll need to come back in a few samples and try again.
+		 * There's a minimum wait, as it takes some time for the DMA
+		 * engine to startup, etc...
+		 */
+		if (sync > 0) {
+			if (sync < 16)
+				sync = 16;
+			sis_update_sso(voice, sync);
+			return;
+		}
+
+		/* Ok, we interrupted right on time, or (hopefully) just
+		 * a bit late. We'll adjst our next waiting period based
+		 * on how close we got.
+		 *
+		 * We need to stay just behind the actual channel to ensure
+		 * it really is past a period when we get our interrupt --
+		 * otherwise we'll fall into the early code above and have
+		 * a minimum wait time, which makes us quite late here,
+		 * eating into the user's time to refresh the buffer, esp.
+		 * if using small periods.
+		 *
+		 * If we're less than 9 samples behind, we're on target.
+		 * Otherwise, shorten the next vperiod by the amount we've
+		 * been delayed.
+		 */
+		if (sync > -9)
+			voice->vperiod = voice->sync_period_size + 1;
+		else
+			voice->vperiod = voice->sync_period_size + sync + 10;
+
+		if (voice->vperiod < voice->buffer_size) {
+			sis_update_sso(voice, voice->vperiod);
+			voice->vperiod = 0;
+		} else
+			sis_update_sso(voice, voice->period_size);
+
+		sync = voice->sync_cso + voice->sync_period_size;
+		if (sync >= voice->sync_buffer_size)
+			sync -= voice->sync_buffer_size;
+		voice->sync_cso = sync;
+	}
+
+	snd_pcm_period_elapsed(voice->substream);
+}
+
+static void sis_voice_irq(u32 status, struct voice *voice)
+{
+	int bit;
+
+	while (status) {
+		bit = __ffs(status);
+		status >>= bit + 1;
+		voice += bit;
+		sis_update_voice(voice);
+		voice++;
+	}
+}
+
+static irqreturn_t sis_interrupt(int irq, void *dev)
+{
+	struct sis7019 *sis = dev;
+	unsigned long io = sis->ioport;
+	struct voice *voice;
+	u32 intr, status;
+
+	/* We only use the DMA interrupts, and we don't enable any other
+	 * source of interrupts. But, it is possible to see an interrupt
+	 * status that didn't actually interrupt us, so eliminate anything
+	 * we're not expecting to avoid falsely claiming an IRQ, and an
+	 * ensuing endless loop.
+	 */
+	intr = inl(io + SIS_GISR);
+	intr &= SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS |
+		SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS;
+	if (!intr)
+		return IRQ_NONE;
+
+	do {
+		status = inl(io + SIS_PISR_A);
+		if (status) {
+			sis_voice_irq(status, sis->voices);
+			outl(status, io + SIS_PISR_A);
+		}
+
+		status = inl(io + SIS_PISR_B);
+		if (status) {
+			sis_voice_irq(status, &sis->voices[32]);
+			outl(status, io + SIS_PISR_B);
+		}
+
+		status = inl(io + SIS_RISR);
+		if (status) {
+			voice = &sis->capture_voice;
+			if (!voice->timing)
+				snd_pcm_period_elapsed(voice->substream);
+
+			outl(status, io + SIS_RISR);
+		}
+
+		outl(intr, io + SIS_GISR);
+		intr = inl(io + SIS_GISR);
+		intr &= SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS |
+			SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS;
+	} while (intr);
+
+	return IRQ_HANDLED;
+}
+
+static u32 sis_rate_to_delta(unsigned int rate)
+{
+	u32 delta;
+
+	/* This was copied from the trident driver, but it seems its gotten
+	 * around a bit... nevertheless, it works well.
+	 *
+	 * We special case 44100 and 8000 since rounding with the equation
+	 * does not give us an accurate enough value. For 11025 and 22050
+	 * the equation gives us the best answer. All other frequencies will
+	 * also use the equation. JDW
+	 */
+	if (rate == 44100)
+		delta = 0xeb3;
+	else if (rate == 8000)
+		delta = 0x2ab;
+	else if (rate == 48000)
+		delta = 0x1000;
+	else
+		delta = DIV_ROUND_CLOSEST(rate << 12, 48000) & 0x0000ffff;
+	return delta;
+}
+
+static void __sis_map_silence(struct sis7019 *sis)
+{
+	/* Helper function: must hold sis->voice_lock on entry */
+	if (!sis->silence_users)
+		sis->silence_dma_addr = dma_map_single(&sis->pci->dev,
+						sis->suspend_state[0],
+						4096, DMA_TO_DEVICE);
+	sis->silence_users++;
+}
+
+static void __sis_unmap_silence(struct sis7019 *sis)
+{
+	/* Helper function: must hold sis->voice_lock on entry */
+	sis->silence_users--;
+	if (!sis->silence_users)
+		dma_unmap_single(&sis->pci->dev, sis->silence_dma_addr, 4096,
+					DMA_TO_DEVICE);
+}
+
+static void sis_free_voice(struct sis7019 *sis, struct voice *voice)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sis->voice_lock, flags);
+	if (voice->timing) {
+		__sis_unmap_silence(sis);
+		voice->timing->flags &= ~(VOICE_IN_USE | VOICE_SSO_TIMING |
+						VOICE_SYNC_TIMING);
+		voice->timing = NULL;
+	}
+	voice->flags &= ~(VOICE_IN_USE | VOICE_SSO_TIMING | VOICE_SYNC_TIMING);
+	spin_unlock_irqrestore(&sis->voice_lock, flags);
+}
+
+static struct voice *__sis_alloc_playback_voice(struct sis7019 *sis)
+{
+	/* Must hold the voice_lock on entry */
+	struct voice *voice;
+	int i;
+
+	for (i = 0; i < 64; i++) {
+		voice = &sis->voices[i];
+		if (voice->flags & VOICE_IN_USE)
+			continue;
+		voice->flags |= VOICE_IN_USE;
+		goto found_one;
+	}
+	voice = NULL;
+
+found_one:
+	return voice;
+}
+
+static struct voice *sis_alloc_playback_voice(struct sis7019 *sis)
+{
+	struct voice *voice;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sis->voice_lock, flags);
+	voice = __sis_alloc_playback_voice(sis);
+	spin_unlock_irqrestore(&sis->voice_lock, flags);
+
+	return voice;
+}
+
+static int sis_alloc_timing_voice(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *hw_params)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice = runtime->private_data;
+	unsigned int period_size, buffer_size;
+	unsigned long flags;
+	int needed;
+
+	/* If there are one or two periods per buffer, we don't need a
+	 * timing voice, as we can use the capture channel's interrupts
+	 * to clock out the periods.
+	 */
+	period_size = params_period_size(hw_params);
+	buffer_size = params_buffer_size(hw_params);
+	needed = (period_size != buffer_size &&
+			period_size != (buffer_size / 2));
+
+	if (needed && !voice->timing) {
+		spin_lock_irqsave(&sis->voice_lock, flags);
+		voice->timing = __sis_alloc_playback_voice(sis);
+		if (voice->timing)
+			__sis_map_silence(sis);
+		spin_unlock_irqrestore(&sis->voice_lock, flags);
+		if (!voice->timing)
+			return -ENOMEM;
+		voice->timing->substream = substream;
+	} else if (!needed && voice->timing) {
+		sis_free_voice(sis, voice);
+		voice->timing = NULL;
+	}
+
+	return 0;
+}
+
+static int sis_playback_open(struct snd_pcm_substream *substream)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice;
+
+	voice = sis_alloc_playback_voice(sis);
+	if (!voice)
+		return -EAGAIN;
+
+	voice->substream = substream;
+	runtime->private_data = voice;
+	runtime->hw = sis_playback_hw_info;
+	snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+						9, 0xfff9);
+	snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+						9, 0xfff9);
+	snd_pcm_set_sync(substream);
+	return 0;
+}
+
+static int sis_substream_close(struct snd_pcm_substream *substream)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice = runtime->private_data;
+
+	sis_free_voice(sis, voice);
+	return 0;
+}
+
+static int sis_pcm_playback_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice = runtime->private_data;
+	void __iomem *ctrl_base = voice->ctrl_base;
+	void __iomem *wave_base = voice->wave_base;
+	u32 format, dma_addr, control, sso_eso, delta, reg;
+	u16 leo;
+
+	/* We rely on the PCM core to ensure that the parameters for this
+	 * substream do not change on us while we're programming the HW.
+	 */
+	format = 0;
+	if (snd_pcm_format_width(runtime->format) == 8)
+		format |= SIS_PLAY_DMA_FORMAT_8BIT;
+	if (!snd_pcm_format_signed(runtime->format))
+		format |= SIS_PLAY_DMA_FORMAT_UNSIGNED;
+	if (runtime->channels == 1)
+		format |= SIS_PLAY_DMA_FORMAT_MONO;
+
+	/* The baseline setup is for a single period per buffer, and
+	 * we add bells and whistles as needed from there.
+	 */
+	dma_addr = runtime->dma_addr;
+	leo = runtime->buffer_size - 1;
+	control = leo | SIS_PLAY_DMA_LOOP | SIS_PLAY_DMA_INTR_AT_LEO;
+	sso_eso = leo;
+
+	if (runtime->period_size == (runtime->buffer_size / 2)) {
+		control |= SIS_PLAY_DMA_INTR_AT_MLP;
+	} else if (runtime->period_size != runtime->buffer_size) {
+		voice->flags |= VOICE_SSO_TIMING;
+		voice->sso = runtime->period_size - 1;
+		voice->period_size = runtime->period_size;
+		voice->buffer_size = runtime->buffer_size;
+
+		control &= ~SIS_PLAY_DMA_INTR_AT_LEO;
+		control |= SIS_PLAY_DMA_INTR_AT_SSO;
+		sso_eso |= (runtime->period_size - 1) << 16;
+	}
+
+	delta = sis_rate_to_delta(runtime->rate);
+
+	/* Ok, we're ready to go, set up the channel.
+	 */
+	writel(format, ctrl_base + SIS_PLAY_DMA_FORMAT_CSO);
+	writel(dma_addr, ctrl_base + SIS_PLAY_DMA_BASE);
+	writel(control, ctrl_base + SIS_PLAY_DMA_CONTROL);
+	writel(sso_eso, ctrl_base + SIS_PLAY_DMA_SSO_ESO);
+
+	for (reg = 0; reg < SIS_WAVE_SIZE; reg += 4)
+		writel(0, wave_base + reg);
+
+	writel(SIS_WAVE_GENERAL_WAVE_VOLUME, wave_base + SIS_WAVE_GENERAL);
+	writel(delta << 16, wave_base + SIS_WAVE_GENERAL_ARTICULATION);
+	writel(SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE |
+			SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE |
+			SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE,
+			wave_base + SIS_WAVE_CHANNEL_CONTROL);
+
+	/* Force PCI writes to post. */
+	readl(ctrl_base);
+
+	return 0;
+}
+
+static int sis_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	unsigned long io = sis->ioport;
+	struct snd_pcm_substream *s;
+	struct voice *voice;
+	void *chip;
+	int starting;
+	u32 record = 0;
+	u32 play[2] = { 0, 0 };
+
+	/* No locks needed, as the PCM core will hold the locks on the
+	 * substreams, and the HW will only start/stop the indicated voices
+	 * without changing the state of the others.
+	 */
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		starting = 1;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		starting = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_pcm_group_for_each_entry(s, substream) {
+		/* Make sure it is for us... */
+		chip = snd_pcm_substream_chip(s);
+		if (chip != sis)
+			continue;
+
+		voice = s->runtime->private_data;
+		if (voice->flags & VOICE_CAPTURE) {
+			record |= 1 << voice->num;
+			voice = voice->timing;
+		}
+
+		/* voice could be NULL if this a recording stream, and it
+		 * doesn't have an external timing channel.
+		 */
+		if (voice)
+			play[voice->num / 32] |= 1 << (voice->num & 0x1f);
+
+		snd_pcm_trigger_done(s, substream);
+	}
+
+	if (starting) {
+		if (record)
+			outl(record, io + SIS_RECORD_START_REG);
+		if (play[0])
+			outl(play[0], io + SIS_PLAY_START_A_REG);
+		if (play[1])
+			outl(play[1], io + SIS_PLAY_START_B_REG);
+	} else {
+		if (record)
+			outl(record, io + SIS_RECORD_STOP_REG);
+		if (play[0])
+			outl(play[0], io + SIS_PLAY_STOP_A_REG);
+		if (play[1])
+			outl(play[1], io + SIS_PLAY_STOP_B_REG);
+	}
+	return 0;
+}
+
+static snd_pcm_uframes_t sis_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice = runtime->private_data;
+	u32 cso;
+
+	cso = readl(voice->ctrl_base + SIS_PLAY_DMA_FORMAT_CSO);
+	cso &= 0xffff;
+	return cso;
+}
+
+static int sis_capture_open(struct snd_pcm_substream *substream)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice = &sis->capture_voice;
+	unsigned long flags;
+
+	/* FIXME: The driver only supports recording from one channel
+	 * at the moment, but it could support more.
+	 */
+	spin_lock_irqsave(&sis->voice_lock, flags);
+	if (voice->flags & VOICE_IN_USE)
+		voice = NULL;
+	else
+		voice->flags |= VOICE_IN_USE;
+	spin_unlock_irqrestore(&sis->voice_lock, flags);
+
+	if (!voice)
+		return -EAGAIN;
+
+	voice->substream = substream;
+	runtime->private_data = voice;
+	runtime->hw = sis_capture_hw_info;
+	runtime->hw.rates = sis->ac97[0]->rates[AC97_RATES_ADC];
+	snd_pcm_limit_hw_rates(runtime);
+	snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+						9, 0xfff9);
+	snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+						9, 0xfff9);
+	snd_pcm_set_sync(substream);
+	return 0;
+}
+
+static int sis_capture_hw_params(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *hw_params)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	int rc;
+
+	rc = snd_ac97_set_rate(sis->ac97[0], AC97_PCM_LR_ADC_RATE,
+						params_rate(hw_params));
+	if (rc)
+		goto out;
+
+	rc = sis_alloc_timing_voice(substream, hw_params);
+
+out:
+	return rc;
+}
+
+static void sis_prepare_timing_voice(struct voice *voice,
+					struct snd_pcm_substream *substream)
+{
+	struct sis7019 *sis = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *timing = voice->timing;
+	void __iomem *play_base = timing->ctrl_base;
+	void __iomem *wave_base = timing->wave_base;
+	u16 buffer_size, period_size;
+	u32 format, control, sso_eso, delta;
+	u32 vperiod, sso, reg;
+
+	/* Set our initial buffer and period as large as we can given a
+	 * single page of silence.
+	 */
+	buffer_size = 4096 / runtime->channels;
+	buffer_size /= snd_pcm_format_size(runtime->format, 1);
+	period_size = buffer_size;
+
+	/* Initially, we want to interrupt just a bit behind the end of
+	 * the period we're clocking out. 12 samples seems to give a good
+	 * delay.
+	 *
+	 * We want to spread our interrupts throughout the virtual period,
+	 * so that we don't end up with two interrupts back to back at the
+	 * end -- this helps minimize the effects of any jitter. Adjust our
+	 * clocking period size so that the last period is at least a fourth
+	 * of a full period.
+	 *
+	 * This is all moot if we don't need to use virtual periods.
+	 */
+	vperiod = runtime->period_size + 12;
+	if (vperiod > period_size) {
+		u16 tail = vperiod % period_size;
+		u16 quarter_period = period_size / 4;
+
+		if (tail && tail < quarter_period) {
+			u16 loops = vperiod / period_size;
+
+			tail = quarter_period - tail;
+			tail += loops - 1;
+			tail /= loops;
+			period_size -= tail;
+		}
+
+		sso = period_size - 1;
+	} else {
+		/* The initial period will fit inside the buffer, so we
+		 * don't need to use virtual periods -- disable them.
+		 */
+		period_size = runtime->period_size;
+		sso = vperiod - 1;
+		vperiod = 0;
+	}
+
+	/* The interrupt handler implements the timing synchronization, so
+	 * setup its state.
+	 */
+	timing->flags |= VOICE_SYNC_TIMING;
+	timing->sync_base = voice->ctrl_base;
+	timing->sync_cso = runtime->period_size;
+	timing->sync_period_size = runtime->period_size;
+	timing->sync_buffer_size = runtime->buffer_size;
+	timing->period_size = period_size;
+	timing->buffer_size = buffer_size;
+	timing->sso = sso;
+	timing->vperiod = vperiod;
+
+	/* Using unsigned samples with the all-zero silence buffer
+	 * forces the output to the lower rail, killing playback.
+	 * So ignore unsigned vs signed -- it doesn't change the timing.
+	 */
+	format = 0;
+	if (snd_pcm_format_width(runtime->format) == 8)
+		format = SIS_CAPTURE_DMA_FORMAT_8BIT;
+	if (runtime->channels == 1)
+		format |= SIS_CAPTURE_DMA_FORMAT_MONO;
+
+	control = timing->buffer_size - 1;
+	control |= SIS_PLAY_DMA_LOOP | SIS_PLAY_DMA_INTR_AT_SSO;
+	sso_eso = timing->buffer_size - 1;
+	sso_eso |= timing->sso << 16;
+
+	delta = sis_rate_to_delta(runtime->rate);
+
+	/* We've done the math, now configure the channel.
+	 */
+	writel(format, play_base + SIS_PLAY_DMA_FORMAT_CSO);
+	writel(sis->silence_dma_addr, play_base + SIS_PLAY_DMA_BASE);
+	writel(control, play_base + SIS_PLAY_DMA_CONTROL);
+	writel(sso_eso, play_base + SIS_PLAY_DMA_SSO_ESO);
+
+	for (reg = 0; reg < SIS_WAVE_SIZE; reg += 4)
+		writel(0, wave_base + reg);
+
+	writel(SIS_WAVE_GENERAL_WAVE_VOLUME, wave_base + SIS_WAVE_GENERAL);
+	writel(delta << 16, wave_base + SIS_WAVE_GENERAL_ARTICULATION);
+	writel(SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE |
+			SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE |
+			SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE,
+			wave_base + SIS_WAVE_CHANNEL_CONTROL);
+}
+
+static int sis_pcm_capture_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct voice *voice = runtime->private_data;
+	void __iomem *rec_base = voice->ctrl_base;
+	u32 format, dma_addr, control;
+	u16 leo;
+
+	/* We rely on the PCM core to ensure that the parameters for this
+	 * substream do not change on us while we're programming the HW.
+	 */
+	format = 0;
+	if (snd_pcm_format_width(runtime->format) == 8)
+		format = SIS_CAPTURE_DMA_FORMAT_8BIT;
+	if (!snd_pcm_format_signed(runtime->format))
+		format |= SIS_CAPTURE_DMA_FORMAT_UNSIGNED;
+	if (runtime->channels == 1)
+		format |= SIS_CAPTURE_DMA_FORMAT_MONO;
+
+	dma_addr = runtime->dma_addr;
+	leo = runtime->buffer_size - 1;
+	control = leo | SIS_CAPTURE_DMA_LOOP;
+
+	/* If we've got more than two periods per buffer, then we have
+	 * use a timing voice to clock out the periods. Otherwise, we can
+	 * use the capture channel's interrupts.
+	 */
+	if (voice->timing) {
+		sis_prepare_timing_voice(voice, substream);
+	} else {
+		control |= SIS_CAPTURE_DMA_INTR_AT_LEO;
+		if (runtime->period_size != runtime->buffer_size)
+			control |= SIS_CAPTURE_DMA_INTR_AT_MLP;
+	}
+
+	writel(format, rec_base + SIS_CAPTURE_DMA_FORMAT_CSO);
+	writel(dma_addr, rec_base + SIS_CAPTURE_DMA_BASE);
+	writel(control, rec_base + SIS_CAPTURE_DMA_CONTROL);
+
+	/* Force the writes to post. */
+	readl(rec_base);
+
+	return 0;
+}
+
+static const struct snd_pcm_ops sis_playback_ops = {
+	.open = sis_playback_open,
+	.close = sis_substream_close,
+	.prepare = sis_pcm_playback_prepare,
+	.trigger = sis_pcm_trigger,
+	.pointer = sis_pcm_pointer,
+};
+
+static const struct snd_pcm_ops sis_capture_ops = {
+	.open = sis_capture_open,
+	.close = sis_substream_close,
+	.hw_params = sis_capture_hw_params,
+	.prepare = sis_pcm_capture_prepare,
+	.trigger = sis_pcm_trigger,
+	.pointer = sis_pcm_pointer,
+};
+
+static int sis_pcm_create(struct sis7019 *sis)
+{
+	struct snd_pcm *pcm;
+	int rc;
+
+	/* We have 64 voices, and the driver currently records from
+	 * only one channel, though that could change in the future.
+	 */
+	rc = snd_pcm_new(sis->card, "SiS7019", 0, 64, 1, &pcm);
+	if (rc)
+		return rc;
+
+	pcm->private_data = sis;
+	strcpy(pcm->name, "SiS7019");
+	sis->pcm = pcm;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &sis_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &sis_capture_ops);
+
+	/* Try to preallocate some memory, but it's not the end of the
+	 * world if this fails.
+	 */
+	snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
+				       &sis->pci->dev, 64*1024, 128*1024);
+
+	return 0;
+}
+
+static unsigned short sis_ac97_rw(struct sis7019 *sis, int codec, u32 cmd)
+{
+	unsigned long io = sis->ioport;
+	unsigned short val = 0xffff;
+	u16 status;
+	u16 rdy;
+	int count;
+	static const u16 codec_ready[3] = {
+		SIS_AC97_STATUS_CODEC_READY,
+		SIS_AC97_STATUS_CODEC2_READY,
+		SIS_AC97_STATUS_CODEC3_READY,
+	};
+
+	rdy = codec_ready[codec];
+
+
+	/* Get the AC97 semaphore -- software first, so we don't spin
+	 * pounding out IO reads on the hardware semaphore...
+	 */
+	mutex_lock(&sis->ac97_mutex);
+
+	count = 0xffff;
+	while ((inw(io + SIS_AC97_SEMA) & SIS_AC97_SEMA_BUSY) && --count)
+		udelay(1);
+
+	if (!count)
+		goto timeout;
+
+	/* ... and wait for any outstanding commands to complete ...
+	 */
+	count = 0xffff;
+	do {
+		status = inw(io + SIS_AC97_STATUS);
+		if ((status & rdy) && !(status & SIS_AC97_STATUS_BUSY))
+			break;
+
+		udelay(1);
+	} while (--count);
+
+	if (!count)
+		goto timeout_sema;
+
+	/* ... before sending our command and waiting for it to finish ...
+	 */
+	outl(cmd, io + SIS_AC97_CMD);
+	udelay(10);
+
+	count = 0xffff;
+	while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count)
+		udelay(1);
+
+	/* ... and reading the results (if any).
+	 */
+	val = inl(io + SIS_AC97_CMD) >> 16;
+
+timeout_sema:
+	outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA);
+timeout:
+	mutex_unlock(&sis->ac97_mutex);
+
+	if (!count) {
+		dev_err(&sis->pci->dev, "ac97 codec %d timeout cmd 0x%08x\n",
+					codec, cmd);
+	}
+
+	return val;
+}
+
+static void sis_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+				unsigned short val)
+{
+	static const u32 cmd[3] = {
+		SIS_AC97_CMD_CODEC_WRITE,
+		SIS_AC97_CMD_CODEC2_WRITE,
+		SIS_AC97_CMD_CODEC3_WRITE,
+	};
+	sis_ac97_rw(ac97->private_data, ac97->num,
+			(val << 16) | (reg << 8) | cmd[ac97->num]);
+}
+
+static unsigned short sis_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
+{
+	static const u32 cmd[3] = {
+		SIS_AC97_CMD_CODEC_READ,
+		SIS_AC97_CMD_CODEC2_READ,
+		SIS_AC97_CMD_CODEC3_READ,
+	};
+	return sis_ac97_rw(ac97->private_data, ac97->num,
+					(reg << 8) | cmd[ac97->num]);
+}
+
+static int sis_mixer_create(struct sis7019 *sis)
+{
+	struct snd_ac97_bus *bus;
+	struct snd_ac97_template ac97;
+	static const struct snd_ac97_bus_ops ops = {
+		.write = sis_ac97_write,
+		.read = sis_ac97_read,
+	};
+	int rc;
+
+	memset(&ac97, 0, sizeof(ac97));
+	ac97.private_data = sis;
+
+	rc = snd_ac97_bus(sis->card, 0, &ops, NULL, &bus);
+	if (!rc && sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT)
+		rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[0]);
+	ac97.num = 1;
+	if (!rc && (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT))
+		rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[1]);
+	ac97.num = 2;
+	if (!rc && (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT))
+		rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[2]);
+
+	/* If we return an error here, then snd_card_free() should
+	 * free up any ac97 codecs that got created, as well as the bus.
+	 */
+	return rc;
+}
+
+static void sis_chip_free(struct snd_card *card)
+{
+	struct sis7019 *sis = card->private_data;
+
+	/* Reset the chip, and disable all interrputs.
+	 */
+	outl(SIS_GCR_SOFTWARE_RESET, sis->ioport + SIS_GCR);
+	udelay(25);
+	outl(0, sis->ioport + SIS_GCR);
+	outl(0, sis->ioport + SIS_GIER);
+
+	/* Now, free everything we allocated.
+	 */
+	if (sis->irq >= 0)
+		free_irq(sis->irq, sis);
+}
+
+static int sis_chip_init(struct sis7019 *sis)
+{
+	unsigned long io = sis->ioport;
+	void __iomem *ioaddr = sis->ioaddr;
+	unsigned long timeout;
+	u16 status;
+	int count;
+	int i;
+
+	/* Reset the audio controller
+	 */
+	outl(SIS_GCR_SOFTWARE_RESET, io + SIS_GCR);
+	udelay(25);
+	outl(0, io + SIS_GCR);
+
+	/* Get the AC-link semaphore, and reset the codecs
+	 */
+	count = 0xffff;
+	while ((inw(io + SIS_AC97_SEMA) & SIS_AC97_SEMA_BUSY) && --count)
+		udelay(1);
+
+	if (!count)
+		return -EIO;
+
+	outl(SIS_AC97_CMD_CODEC_COLD_RESET, io + SIS_AC97_CMD);
+	udelay(250);
+
+	count = 0xffff;
+	while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count)
+		udelay(1);
+
+	/* Command complete, we can let go of the semaphore now.
+	 */
+	outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA);
+	if (!count)
+		return -EIO;
+
+	/* Now that we've finished the reset, find out what's attached.
+	 * There are some codec/board combinations that take an extremely
+	 * long time to come up. 350+ ms has been observed in the field,
+	 * so we'll give them up to 500ms.
+	 */
+	sis->codecs_present = 0;
+	timeout = msecs_to_jiffies(500) + jiffies;
+	while (time_before_eq(jiffies, timeout)) {
+		status = inl(io + SIS_AC97_STATUS);
+		if (status & SIS_AC97_STATUS_CODEC_READY)
+			sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT;
+		if (status & SIS_AC97_STATUS_CODEC2_READY)
+			sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT;
+		if (status & SIS_AC97_STATUS_CODEC3_READY)
+			sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT;
+
+		if (sis->codecs_present == codecs)
+			break;
+
+		msleep(1);
+	}
+
+	/* All done, check for errors.
+	 */
+	if (!sis->codecs_present) {
+		dev_err(&sis->pci->dev, "could not find any codecs\n");
+		return -EIO;
+	}
+
+	if (sis->codecs_present != codecs) {
+		dev_warn(&sis->pci->dev, "missing codecs, found %0x, expected %0x\n",
+					 sis->codecs_present, codecs);
+	}
+
+	/* Let the hardware know that the audio driver is alive,
+	 * and enable PCM slots on the AC-link for L/R playback (3 & 4) and
+	 * record channels. We're going to want to use Variable Rate Audio
+	 * for recording, to avoid needlessly resampling from 48kHZ.
+	 */
+	outl(SIS_AC97_CONF_AUDIO_ALIVE, io + SIS_AC97_CONF);
+	outl(SIS_AC97_CONF_AUDIO_ALIVE | SIS_AC97_CONF_PCM_LR_ENABLE |
+		SIS_AC97_CONF_PCM_CAP_MIC_ENABLE |
+		SIS_AC97_CONF_PCM_CAP_LR_ENABLE |
+		SIS_AC97_CONF_CODEC_VRA_ENABLE, io + SIS_AC97_CONF);
+
+	/* All AC97 PCM slots should be sourced from sub-mixer 0.
+	 */
+	outl(0, io + SIS_AC97_PSR);
+
+	/* There is only one valid DMA setup for a PCI environment.
+	 */
+	outl(SIS_DMA_CSR_PCI_SETTINGS, io + SIS_DMA_CSR);
+
+	/* Reset the synchronization groups for all of the channels
+	 * to be asynchronous. If we start doing SPDIF or 5.1 sound, etc.
+	 * we'll need to change how we handle these. Until then, we just
+	 * assign sub-mixer 0 to all playback channels, and avoid any
+	 * attenuation on the audio.
+	 */
+	outl(0, io + SIS_PLAY_SYNC_GROUP_A);
+	outl(0, io + SIS_PLAY_SYNC_GROUP_B);
+	outl(0, io + SIS_PLAY_SYNC_GROUP_C);
+	outl(0, io + SIS_PLAY_SYNC_GROUP_D);
+	outl(0, io + SIS_MIXER_SYNC_GROUP);
+
+	for (i = 0; i < 64; i++) {
+		writel(i, SIS_MIXER_START_ADDR(ioaddr, i));
+		writel(SIS_MIXER_RIGHT_NO_ATTEN | SIS_MIXER_LEFT_NO_ATTEN |
+				SIS_MIXER_DEST_0, SIS_MIXER_ADDR(ioaddr, i));
+	}
+
+	/* Don't attenuate any audio set for the wave amplifier.
+	 *
+	 * FIXME: Maximum attenuation is set for the music amp, which will
+	 * need to change if we start using the synth engine.
+	 */
+	outl(0xffff0000, io + SIS_WEVCR);
+
+	/* Ensure that the wave engine is in normal operating mode.
+	 */
+	outl(0, io + SIS_WECCR);
+
+	/* Go ahead and enable the DMA interrupts. They won't go live
+	 * until we start a channel.
+	 */
+	outl(SIS_GIER_AUDIO_PLAY_DMA_IRQ_ENABLE |
+		SIS_GIER_AUDIO_RECORD_DMA_IRQ_ENABLE, io + SIS_GIER);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sis_suspend(struct device *dev)
+{
+	struct snd_card *card = dev_get_drvdata(dev);
+	struct sis7019 *sis = card->private_data;
+	void __iomem *ioaddr = sis->ioaddr;
+	int i;
+
+	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+	if (sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT)
+		snd_ac97_suspend(sis->ac97[0]);
+	if (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT)
+		snd_ac97_suspend(sis->ac97[1]);
+	if (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT)
+		snd_ac97_suspend(sis->ac97[2]);
+
+	/* snd_pcm_suspend_all() stopped all channels, so we're quiescent.
+	 */
+	if (sis->irq >= 0) {
+		free_irq(sis->irq, sis);
+		sis->irq = -1;
+	}
+
+	/* Save the internal state away
+	 */
+	for (i = 0; i < 4; i++) {
+		memcpy_fromio(sis->suspend_state[i], ioaddr, 4096);
+		ioaddr += 4096;
+	}
+
+	return 0;
+}
+
+static int sis_resume(struct device *dev)
+{
+	struct pci_dev *pci = to_pci_dev(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
+	struct sis7019 *sis = card->private_data;
+	void __iomem *ioaddr = sis->ioaddr;
+	int i;
+
+	if (sis_chip_init(sis)) {
+		dev_err(&pci->dev, "unable to re-init controller\n");
+		goto error;
+	}
+
+	if (request_irq(pci->irq, sis_interrupt, IRQF_SHARED,
+			KBUILD_MODNAME, sis)) {
+		dev_err(&pci->dev, "unable to regain IRQ %d\n", pci->irq);
+		goto error;
+	}
+
+	/* Restore saved state, then clear out the page we use for the
+	 * silence buffer.
+	 */
+	for (i = 0; i < 4; i++) {
+		memcpy_toio(ioaddr, sis->suspend_state[i], 4096);
+		ioaddr += 4096;
+	}
+
+	memset(sis->suspend_state[0], 0, 4096);
+
+	sis->irq = pci->irq;
+
+	if (sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT)
+		snd_ac97_resume(sis->ac97[0]);
+	if (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT)
+		snd_ac97_resume(sis->ac97[1]);
+	if (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT)
+		snd_ac97_resume(sis->ac97[2]);
+
+	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+	return 0;
+
+error:
+	snd_card_disconnect(card);
+	return -EIO;
+}
+
+static SIMPLE_DEV_PM_OPS(sis_pm, sis_suspend, sis_resume);
+#define SIS_PM_OPS	&sis_pm
+#else
+#define SIS_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static int sis_alloc_suspend(struct sis7019 *sis)
+{
+	int i;
+
+	/* We need 16K to store the internal wave engine state during a
+	 * suspend, but we don't need it to be contiguous, so play nice
+	 * with the memory system. We'll also use this area for a silence
+	 * buffer.
+	 */
+	for (i = 0; i < SIS_SUSPEND_PAGES; i++) {
+		sis->suspend_state[i] = devm_kmalloc(&sis->pci->dev, 4096,
+						     GFP_KERNEL);
+		if (!sis->suspend_state[i])
+			return -ENOMEM;
+	}
+	memset(sis->suspend_state[0], 0, 4096);
+
+	return 0;
+}
+
+static int sis_chip_create(struct snd_card *card,
+			   struct pci_dev *pci)
+{
+	struct sis7019 *sis = card->private_data;
+	struct voice *voice;
+	int rc;
+	int i;
+
+	rc = pcim_enable_device(pci);
+	if (rc)
+		return rc;
+
+	rc = dma_set_mask(&pci->dev, DMA_BIT_MASK(30));
+	if (rc < 0) {
+		dev_err(&pci->dev, "architecture does not support 30-bit PCI busmaster DMA");
+		return -ENXIO;
+	}
+
+	mutex_init(&sis->ac97_mutex);
+	spin_lock_init(&sis->voice_lock);
+	sis->card = card;
+	sis->pci = pci;
+	sis->irq = -1;
+	sis->ioport = pci_resource_start(pci, 0);
+
+	rc = pci_request_regions(pci, "SiS7019");
+	if (rc) {
+		dev_err(&pci->dev, "unable request regions\n");
+		return rc;
+	}
+
+	sis->ioaddr = devm_ioremap(&pci->dev, pci_resource_start(pci, 1), 0x4000);
+	if (!sis->ioaddr) {
+		dev_err(&pci->dev, "unable to remap MMIO, aborting\n");
+		return -EIO;
+	}
+
+	rc = sis_alloc_suspend(sis);
+	if (rc < 0) {
+		dev_err(&pci->dev, "unable to allocate state storage\n");
+		return rc;
+	}
+
+	rc = sis_chip_init(sis);
+	if (rc)
+		return rc;
+	card->private_free = sis_chip_free;
+
+	rc = request_irq(pci->irq, sis_interrupt, IRQF_SHARED, KBUILD_MODNAME,
+			 sis);
+	if (rc) {
+		dev_err(&pci->dev, "unable to allocate irq %d\n", sis->irq);
+		return rc;
+	}
+
+	sis->irq = pci->irq;
+	card->sync_irq = sis->irq;
+	pci_set_master(pci);
+
+	for (i = 0; i < 64; i++) {
+		voice = &sis->voices[i];
+		voice->num = i;
+		voice->ctrl_base = SIS_PLAY_DMA_ADDR(sis->ioaddr, i);
+		voice->wave_base = SIS_WAVE_ADDR(sis->ioaddr, i);
+	}
+
+	voice = &sis->capture_voice;
+	voice->flags = VOICE_CAPTURE;
+	voice->num = SIS_CAPTURE_CHAN_AC97_PCM_IN;
+	voice->ctrl_base = SIS_CAPTURE_DMA_ADDR(sis->ioaddr, voice->num);
+
+	return 0;
+}
+
+static int __snd_sis7019_probe(struct pci_dev *pci,
+			       const struct pci_device_id *pci_id)
+{
+	struct snd_card *card;
+	struct sis7019 *sis;
+	int rc;
+
+	if (!enable)
+		return -ENOENT;
+
+	/* The user can specify which codecs should be present so that we
+	 * can wait for them to show up if they are slow to recover from
+	 * the AC97 cold reset. We default to a single codec, the primary.
+	 *
+	 * We assume that SIS_PRIMARY_*_PRESENT matches bits 0-2.
+	 */
+	codecs &= SIS_PRIMARY_CODEC_PRESENT | SIS_SECONDARY_CODEC_PRESENT |
+		  SIS_TERTIARY_CODEC_PRESENT;
+	if (!codecs)
+		codecs = SIS_PRIMARY_CODEC_PRESENT;
+
+	rc = snd_devm_card_new(&pci->dev, index, id, THIS_MODULE,
+			       sizeof(*sis), &card);
+	if (rc < 0)
+		return rc;
+
+	strcpy(card->driver, "SiS7019");
+	strcpy(card->shortname, "SiS7019");
+	rc = sis_chip_create(card, pci);
+	if (rc)
+		return rc;
+
+	sis = card->private_data;
+
+	rc = sis_mixer_create(sis);
+	if (rc)
+		return rc;
+
+	rc = sis_pcm_create(sis);
+	if (rc)
+		return rc;
+
+	snprintf(card->longname, sizeof(card->longname),
+			"%s Audio Accelerator with %s at 0x%lx, irq %d",
+			card->shortname, snd_ac97_get_short_name(sis->ac97[0]),
+			sis->ioport, sis->irq);
+
+	rc = snd_card_register(card);
+	if (rc)
+		return rc;
+
+	pci_set_drvdata(pci, card);
+	return 0;
+}
+
+static int snd_sis7019_probe(struct pci_dev *pci,
+			     const struct pci_device_id *pci_id)
+{
+	return snd_card_free_on_error(&pci->dev, __snd_sis7019_probe(pci, pci_id));
+}
+
+static struct pci_driver sis7019_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = snd_sis7019_ids,
+	.probe = snd_sis7019_probe,
+	.driver = {
+		.pm = SIS_PM_OPS,
+	},
+};
+
+module_pci_driver(sis7019_driver);