Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 610 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt1019.c b/sound/soc/codecs/rt1019.c
new file mode 100644
index 000000000..49f527c61
--- /dev/null
+++ b/sound/soc/codecs/rt1019.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// rt1019.c  --  RT1019 ALSA SoC audio amplifier driver
+// Author: Jack Yu <jack.yu@realtek.com>
+//
+// Copyright(c) 2021 Realtek Semiconductor Corp.
+//
+//
+
+#include <linux/acpi.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/firmware.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "rl6231.h"
+#include "rt1019.h"
+
+static const struct reg_default rt1019_reg[] = {
+	{ 0x0000, 0x00 },
+	{ 0x0011, 0x04 },
+	{ 0x0013, 0x00 },
+	{ 0x0019, 0x30 },
+	{ 0x001b, 0x01 },
+	{ 0x005c, 0x00 },
+	{ 0x005e, 0x10 },
+	{ 0x005f, 0xec },
+	{ 0x0061, 0x10 },
+	{ 0x0062, 0x19 },
+	{ 0x0066, 0x08 },
+	{ 0x0100, 0x80 },
+	{ 0x0100, 0x51 },
+	{ 0x0102, 0x23 },
+	{ 0x0311, 0x00 },
+	{ 0x0312, 0x3e },
+	{ 0x0313, 0x86 },
+	{ 0x0400, 0x03 },
+	{ 0x0401, 0x02 },
+	{ 0x0402, 0x01 },
+	{ 0x0504, 0xff },
+	{ 0x0505, 0x24 },
+	{ 0x0b00, 0x50 },
+	{ 0x0b01, 0xc3 },
+};
+
+static bool rt1019_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RT1019_PWR_STRP_2:
+	case RT1019_VER_ID:
+	case RT1019_VEND_ID_1:
+	case RT1019_VEND_ID_2:
+	case RT1019_DEV_ID_1:
+	case RT1019_DEV_ID_2:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool rt1019_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RT1019_RESET:
+	case RT1019_IDS_CTRL:
+	case RT1019_ASEL_CTRL:
+	case RT1019_PWR_STRP_2:
+	case RT1019_BEEP_TONE:
+	case RT1019_VER_ID:
+	case RT1019_VEND_ID_1:
+	case RT1019_VEND_ID_2:
+	case RT1019_DEV_ID_1:
+	case RT1019_DEV_ID_2:
+	case RT1019_SDB_CTRL:
+	case RT1019_CLK_TREE_1:
+	case RT1019_CLK_TREE_2:
+	case RT1019_CLK_TREE_3:
+	case RT1019_PLL_1:
+	case RT1019_PLL_2:
+	case RT1019_PLL_3:
+	case RT1019_TDM_1:
+	case RT1019_TDM_2:
+	case RT1019_TDM_3:
+	case RT1019_DMIX_MONO_1:
+	case RT1019_DMIX_MONO_2:
+	case RT1019_BEEP_1:
+	case RT1019_BEEP_2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -9525, 75, 0);
+
+static const char * const rt1019_din_source_select[] = {
+	"Left",
+	"Right",
+	"Left + Right average",
+};
+
+static SOC_ENUM_SINGLE_DECL(rt1019_mono_lr_sel, RT1019_IDS_CTRL, 0,
+	rt1019_din_source_select);
+
+static const struct snd_kcontrol_new rt1019_snd_controls[] = {
+	SOC_SINGLE_TLV("DAC Playback Volume", RT1019_DMIX_MONO_1, 0,
+		127, 0, dac_vol_tlv),
+	SOC_ENUM("Mono LR Select", rt1019_mono_lr_sel),
+};
+
+static int r1019_dac_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		snd_soc_component_write(component, RT1019_SDB_CTRL, 0xb);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		snd_soc_component_write(component, RT1019_SDB_CTRL, 0xa);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget rt1019_dapm_widgets[] = {
+	SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0,
+		r1019_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_OUTPUT("SPO"),
+};
+
+static const struct snd_soc_dapm_route rt1019_dapm_routes[] = {
+	{ "DAC", NULL, "AIFRX" },
+	{ "SPO", NULL, "DAC" },
+};
+
+static int rt1019_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
+	int pre_div, bclk_ms, frame_size;
+	unsigned int val_len = 0, sys_div_da_filter = 0;
+	unsigned int sys_dac_osr = 0, sys_fifo_clk = 0;
+	unsigned int sys_clk_cal = 0, sys_asrc_in = 0;
+
+	rt1019->lrck = params_rate(params);
+	pre_div = rl6231_get_clk_info(rt1019->sysclk, rt1019->lrck);
+	if (pre_div < 0) {
+		dev_err(component->dev, "Unsupported clock setting\n");
+		return -EINVAL;
+	}
+
+	frame_size = snd_soc_params_to_frame_size(params);
+	if (frame_size < 0) {
+		dev_err(component->dev, "Unsupported frame size: %d\n", frame_size);
+		return -EINVAL;
+	}
+
+	bclk_ms = frame_size > 32;
+	rt1019->bclk = rt1019->lrck * (32 << bclk_ms);
+
+	dev_dbg(dai->dev, "bclk is %dHz and lrck is %dHz\n",
+		rt1019->bclk, rt1019->lrck);
+	dev_dbg(dai->dev, "bclk_ms is %d and pre_div is %d for iis %d\n",
+				bclk_ms, pre_div, dai->id);
+
+	switch (pre_div) {
+	case 0:
+		sys_div_da_filter = RT1019_SYS_DIV_DA_FIL_DIV1;
+		sys_dac_osr = RT1019_SYS_DA_OSR_DIV1;
+		sys_asrc_in = RT1019_ASRC_256FS_DIV1;
+		sys_fifo_clk = RT1019_SEL_FIFO_DIV1;
+		sys_clk_cal = RT1019_SEL_CLK_CAL_DIV1;
+		break;
+	case 1:
+		sys_div_da_filter = RT1019_SYS_DIV_DA_FIL_DIV2;
+		sys_dac_osr = RT1019_SYS_DA_OSR_DIV2;
+		sys_asrc_in = RT1019_ASRC_256FS_DIV2;
+		sys_fifo_clk = RT1019_SEL_FIFO_DIV2;
+		sys_clk_cal = RT1019_SEL_CLK_CAL_DIV2;
+		break;
+	case 3:
+		sys_div_da_filter = RT1019_SYS_DIV_DA_FIL_DIV4;
+		sys_dac_osr = RT1019_SYS_DA_OSR_DIV4;
+		sys_asrc_in = RT1019_ASRC_256FS_DIV4;
+		sys_fifo_clk = RT1019_SEL_FIFO_DIV4;
+		sys_clk_cal = RT1019_SEL_CLK_CAL_DIV4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (params_width(params)) {
+	case 16:
+		break;
+	case 20:
+		val_len = RT1019_I2S_DL_20;
+		break;
+	case 24:
+		val_len = RT1019_I2S_DL_24;
+		break;
+	case 32:
+		val_len = RT1019_I2S_DL_32;
+		break;
+	case 8:
+		val_len = RT1019_I2S_DL_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, RT1019_TDM_2, RT1019_I2S_DL_MASK,
+			val_len);
+	snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
+			RT1019_SEL_FIFO_MASK, sys_fifo_clk);
+	snd_soc_component_update_bits(component, RT1019_CLK_TREE_2,
+			RT1019_SYS_DIV_DA_FIL_MASK | RT1019_SYS_DA_OSR_MASK |
+			RT1019_ASRC_256FS_MASK, sys_div_da_filter | sys_dac_osr |
+			sys_asrc_in);
+	snd_soc_component_update_bits(component, RT1019_CLK_TREE_3,
+			RT1019_SEL_CLK_CAL_MASK, sys_clk_cal);
+
+	return 0;
+}
+
+static int rt1019_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int reg_val = 0, reg_val2 = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		reg_val2 |= RT1019_TDM_BCLK_INV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		break;
+
+	case SND_SOC_DAIFMT_LEFT_J:
+		reg_val |= RT1019_I2S_DF_LEFT;
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A:
+		reg_val |= RT1019_I2S_DF_PCM_A_R;
+		break;
+
+	case SND_SOC_DAIFMT_DSP_B:
+		reg_val |= RT1019_I2S_DF_PCM_B_R;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, RT1019_TDM_2,
+		RT1019_I2S_DF_MASK, reg_val);
+	snd_soc_component_update_bits(component, RT1019_TDM_1,
+		RT1019_TDM_BCLK_MASK, reg_val2);
+
+	return 0;
+}
+
+static int rt1019_set_dai_sysclk(struct snd_soc_dai *dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
+	unsigned int reg_val = 0;
+
+	if (freq == rt1019->sysclk && clk_id == rt1019->sysclk_src)
+		return 0;
+
+	switch (clk_id) {
+	case RT1019_SCLK_S_BCLK:
+		reg_val |= RT1019_CLK_SYS_PRE_SEL_BCLK;
+		break;
+
+	case RT1019_SCLK_S_PLL:
+		reg_val |= RT1019_CLK_SYS_PRE_SEL_PLL;
+		break;
+
+	default:
+		dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
+		return -EINVAL;
+	}
+
+	rt1019->sysclk = freq;
+	rt1019->sysclk_src = clk_id;
+
+	dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id);
+
+	snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
+		RT1019_CLK_SYS_PRE_SEL_MASK, reg_val);
+
+	return 0;
+}
+
+static int rt1019_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source,
+			unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
+	struct rl6231_pll_code pll_code;
+	int ret;
+
+	if (!freq_in || !freq_out) {
+		dev_dbg(component->dev, "PLL disabled\n");
+		rt1019->pll_in = 0;
+		rt1019->pll_out = 0;
+		return 0;
+	}
+
+	if (source == rt1019->pll_src && freq_in == rt1019->pll_in &&
+		freq_out == rt1019->pll_out)
+		return 0;
+
+	switch (source) {
+	case RT1019_PLL_S_BCLK:
+		snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
+			RT1019_PLL_SRC_MASK, RT1019_PLL_SRC_SEL_BCLK);
+		break;
+
+	case RT1019_PLL_S_RC25M:
+		snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
+			RT1019_PLL_SRC_MASK, RT1019_PLL_SRC_SEL_RC);
+		break;
+
+	default:
+		dev_err(component->dev, "Unknown PLL source %d\n", source);
+		return -EINVAL;
+	}
+
+	ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
+	if (ret < 0) {
+		dev_err(component->dev, "Unsupported input clock %d\n", freq_in);
+		return ret;
+	}
+
+	dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
+		pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
+		pll_code.n_code, pll_code.k_code);
+
+	snd_soc_component_update_bits(component, RT1019_PWR_STRP_2,
+		RT1019_AUTO_BITS_SEL_MASK | RT1019_AUTO_CLK_SEL_MASK,
+		RT1019_AUTO_BITS_SEL_MANU | RT1019_AUTO_CLK_SEL_MANU);
+	snd_soc_component_update_bits(component, RT1019_PLL_1,
+		RT1019_PLL_M_MASK | RT1019_PLL_M_BP_MASK | RT1019_PLL_Q_8_8_MASK,
+		((pll_code.m_bp ? 0 : pll_code.m_code) << RT1019_PLL_M_SFT) |
+		(pll_code.m_bp << RT1019_PLL_M_BP_SFT) |
+		((pll_code.n_code >> 8) & RT1019_PLL_Q_8_8_MASK));
+	snd_soc_component_update_bits(component, RT1019_PLL_2,
+		RT1019_PLL_Q_7_0_MASK, pll_code.n_code & RT1019_PLL_Q_7_0_MASK);
+	snd_soc_component_update_bits(component, RT1019_PLL_3,
+		RT1019_PLL_K_MASK, pll_code.k_code);
+
+	rt1019->pll_in = freq_in;
+	rt1019->pll_out = freq_out;
+	rt1019->pll_src = source;
+
+	return 0;
+}
+
+static int rt1019_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+			unsigned int rx_mask, int slots, int slot_width)
+{
+	struct snd_soc_component *component = dai->component;
+	unsigned int cn = 0, cl = 0, rx_slotnum;
+	int ret = 0, first_bit;
+
+	switch (slots) {
+	case 4:
+		cn = RT1019_I2S_TX_4CH;
+		break;
+	case 6:
+		cn = RT1019_I2S_TX_6CH;
+		break;
+	case 8:
+		cn = RT1019_I2S_TX_8CH;
+		break;
+	case 2:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (slot_width) {
+	case 20:
+		cl = RT1019_TDM_CL_20;
+		break;
+	case 24:
+		cl = RT1019_TDM_CL_24;
+		break;
+	case 32:
+		cl = RT1019_TDM_CL_32;
+		break;
+	case 8:
+		cl = RT1019_TDM_CL_8;
+		break;
+	case 16:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Rx slot configuration */
+	rx_slotnum = hweight_long(rx_mask);
+	if (rx_slotnum != 1) {
+		ret = -EINVAL;
+		dev_err(component->dev, "too many rx slots or zero slot\n");
+		goto _set_tdm_err_;
+	}
+	/* This is an assumption that the system sends stereo audio to the
+	 * amplifier typically. And the stereo audio is placed in slot 0/2/4/6
+	 * as the starting slot. The users could select the channel from
+	 * L/R/L+R by "Mono LR Select" control.
+	 */
+	first_bit = __ffs(rx_mask);
+	switch (first_bit) {
+	case 0:
+	case 2:
+	case 4:
+	case 6:
+		snd_soc_component_update_bits(component,
+			RT1019_TDM_3,
+			RT1019_TDM_I2S_TX_L_DAC1_1_MASK |
+			RT1019_TDM_I2S_TX_R_DAC1_1_MASK,
+			(first_bit << RT1019_TDM_I2S_TX_L_DAC1_1_SFT) |
+			((first_bit + 1) << RT1019_TDM_I2S_TX_R_DAC1_1_SFT));
+		break;
+	case 1:
+	case 3:
+	case 5:
+	case 7:
+		snd_soc_component_update_bits(component,
+			RT1019_TDM_3,
+			RT1019_TDM_I2S_TX_L_DAC1_1_MASK |
+			RT1019_TDM_I2S_TX_R_DAC1_1_MASK,
+			((first_bit - 1) << RT1019_TDM_I2S_TX_L_DAC1_1_SFT) |
+			(first_bit << RT1019_TDM_I2S_TX_R_DAC1_1_SFT));
+		break;
+	default:
+		ret = -EINVAL;
+		goto _set_tdm_err_;
+	}
+
+	snd_soc_component_update_bits(component, RT1019_TDM_1,
+		RT1019_TDM_CL_MASK, cl);
+	snd_soc_component_update_bits(component, RT1019_TDM_2,
+		RT1019_I2S_CH_TX_MASK, cn);
+
+_set_tdm_err_:
+	return ret;
+}
+
+static int rt1019_probe(struct snd_soc_component *component)
+{
+	struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
+
+	rt1019->component = component;
+	snd_soc_component_write(component, RT1019_SDB_CTRL, 0xa);
+
+	return 0;
+}
+
+#define RT1019_STEREO_RATES SNDRV_PCM_RATE_8000_192000
+#define RT1019_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8)
+
+static const struct snd_soc_dai_ops rt1019_aif_dai_ops = {
+	.hw_params = rt1019_hw_params,
+	.set_fmt = rt1019_set_dai_fmt,
+	.set_sysclk = rt1019_set_dai_sysclk,
+	.set_pll = rt1019_set_dai_pll,
+	.set_tdm_slot = rt1019_set_tdm_slot,
+};
+
+static struct snd_soc_dai_driver rt1019_dai[] = {
+	{
+		.name = "rt1019-aif",
+		.id = 0,
+		.playback = {
+			.stream_name = "AIF Playback",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = RT1019_STEREO_RATES,
+			.formats = RT1019_FORMATS,
+		},
+		.ops = &rt1019_aif_dai_ops,
+	}
+};
+
+static const struct snd_soc_component_driver soc_component_dev_rt1019 = {
+	.probe			= rt1019_probe,
+	.controls		= rt1019_snd_controls,
+	.num_controls		= ARRAY_SIZE(rt1019_snd_controls),
+	.dapm_widgets		= rt1019_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(rt1019_dapm_widgets),
+	.dapm_routes		= rt1019_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(rt1019_dapm_routes),
+	.endianness		= 1,
+};
+
+static const struct regmap_config rt1019_regmap = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.use_single_read = true,
+	.use_single_write = true,
+	.max_register = RT1019_BEEP_2,
+	.volatile_reg = rt1019_volatile_register,
+	.readable_reg = rt1019_readable_register,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = rt1019_reg,
+	.num_reg_defaults = ARRAY_SIZE(rt1019_reg),
+};
+
+static const struct i2c_device_id rt1019_i2c_id[] = {
+	{ "rt1019", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rt1019_i2c_id);
+
+static const struct of_device_id rt1019_of_match[] = {
+	{ .compatible = "realtek,rt1019", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt1019_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rt1019_acpi_match[] = {
+	{ "10EC1019", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, rt1019_acpi_match);
+#endif
+
+static int rt1019_i2c_probe(struct i2c_client *i2c)
+{
+	struct rt1019_priv *rt1019;
+	int ret;
+	unsigned int val, val2, dev_id;
+
+	rt1019 = devm_kzalloc(&i2c->dev, sizeof(struct rt1019_priv),
+				GFP_KERNEL);
+	if (!rt1019)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, rt1019);
+
+	rt1019->regmap = devm_regmap_init_i2c(i2c, &rt1019_regmap);
+	if (IS_ERR(rt1019->regmap)) {
+		ret = PTR_ERR(rt1019->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	regmap_read(rt1019->regmap, RT1019_DEV_ID_1, &val);
+	regmap_read(rt1019->regmap, RT1019_DEV_ID_2, &val2);
+	dev_id = val << 8 | val2;
+	if (dev_id != RT1019_DEVICE_ID_VAL && dev_id != RT1019_DEVICE_ID_VAL2) {
+		dev_err(&i2c->dev,
+			"Device with ID register 0x%x is not rt1019\n", dev_id);
+		return -ENODEV;
+	}
+
+	return devm_snd_soc_register_component(&i2c->dev,
+		&soc_component_dev_rt1019, rt1019_dai, ARRAY_SIZE(rt1019_dai));
+}
+
+static struct i2c_driver rt1019_i2c_driver = {
+	.driver = {
+		.name = "rt1019",
+		.of_match_table = of_match_ptr(rt1019_of_match),
+		.acpi_match_table = ACPI_PTR(rt1019_acpi_match),
+	},
+	.probe_new = rt1019_i2c_probe,
+	.id_table = rt1019_i2c_id,
+};
+module_i2c_driver(rt1019_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC RT1019 driver");
+MODULE_AUTHOR("Jack Yu <jack.yu@realtek.com>");
+MODULE_LICENSE("GPL v2");