Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 654 insertions, 0 deletions

diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
new file mode 100644
index 000000000..4dd37848b
--- /dev/null
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  bytcht_es8316.c - ASoc Machine driver for Intel Baytrail/Cherrytrail
+ *                    platforms with Everest ES8316 SoC
+ *
+ *  Copyright (C) 2017 Endless Mobile, Inc.
+ *  Authors: David Yang <yangxiaohua@everest-semi.com>,
+ *           Daniel Drake <drake@endlessm.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include "../atom/sst-atom-controls.h"
+#include "../common/soc-intel-quirks.h"
+
+/* jd-inv + terminating entry */
+#define MAX_NO_PROPS 2
+
+struct byt_cht_es8316_private {
+	struct clk *mclk;
+	struct snd_soc_jack jack;
+	struct gpio_desc *speaker_en_gpio;
+	struct device *codec_dev;
+	bool speaker_en;
+};
+
+enum {
+	BYT_CHT_ES8316_INTMIC_IN1_MAP,
+	BYT_CHT_ES8316_INTMIC_IN2_MAP,
+};
+
+#define BYT_CHT_ES8316_MAP(quirk)		((quirk) & GENMASK(3, 0))
+#define BYT_CHT_ES8316_SSP0			BIT(16)
+#define BYT_CHT_ES8316_MONO_SPEAKER		BIT(17)
+#define BYT_CHT_ES8316_JD_INVERTED		BIT(18)
+
+static unsigned long quirk;
+
+static int quirk_override = -1;
+module_param_named(quirk, quirk_override, int, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
+
+static void log_quirks(struct device *dev)
+{
+	if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN1_MAP)
+		dev_info(dev, "quirk IN1_MAP enabled");
+	if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN2_MAP)
+		dev_info(dev, "quirk IN2_MAP enabled");
+	if (quirk & BYT_CHT_ES8316_SSP0)
+		dev_info(dev, "quirk SSP0 enabled");
+	if (quirk & BYT_CHT_ES8316_MONO_SPEAKER)
+		dev_info(dev, "quirk MONO_SPEAKER enabled\n");
+	if (quirk & BYT_CHT_ES8316_JD_INVERTED)
+		dev_info(dev, "quirk JD_INVERTED enabled\n");
+}
+
+static int byt_cht_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+
+	if (SND_SOC_DAPM_EVENT_ON(event))
+		priv->speaker_en = true;
+	else
+		priv->speaker_en = false;
+
+	gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Internal Mic", NULL),
+
+	SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0,
+			    byt_cht_es8316_speaker_power_event,
+			    SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
+	{"Headphone", NULL, "HPOL"},
+	{"Headphone", NULL, "HPOR"},
+
+	/*
+	 * There is no separate speaker output instead the speakers are muxed to
+	 * the HP outputs. The mux is controlled by the "Speaker Power" supply.
+	 */
+	{"Speaker", NULL, "HPOL"},
+	{"Speaker", NULL, "HPOR"},
+	{"Speaker", NULL, "Speaker Power"},
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in1_map[] = {
+	{"MIC1", NULL, "Internal Mic"},
+	{"MIC2", NULL, "Headset Mic"},
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in2_map[] = {
+	{"MIC2", NULL, "Internal Mic"},
+	{"MIC1", NULL, "Headset Mic"},
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = {
+	{"Playback", NULL, "ssp0 Tx"},
+	{"ssp0 Tx", NULL, "modem_out"},
+	{"modem_in", NULL, "ssp0 Rx"},
+	{"ssp0 Rx", NULL, "Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_ssp2_map[] = {
+	{"Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx" },
+	{"codec_in1", NULL, "ssp2 Rx" },
+	{"ssp2 Rx", NULL, "Capture"},
+};
+
+static const struct snd_kcontrol_new byt_cht_es8316_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Internal Mic"),
+};
+
+static struct snd_soc_jack_pin byt_cht_es8316_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+};
+
+static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
+{
+	struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component;
+	struct snd_soc_card *card = runtime->card;
+	struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+	const struct snd_soc_dapm_route *custom_map;
+	int num_routes;
+	int ret;
+
+	card->dapm.idle_bias_off = true;
+
+	switch (BYT_CHT_ES8316_MAP(quirk)) {
+	case BYT_CHT_ES8316_INTMIC_IN1_MAP:
+	default:
+		custom_map = byt_cht_es8316_intmic_in1_map;
+		num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in1_map);
+		break;
+	case BYT_CHT_ES8316_INTMIC_IN2_MAP:
+		custom_map = byt_cht_es8316_intmic_in2_map;
+		num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in2_map);
+		break;
+	}
+	ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
+	if (ret)
+		return ret;
+
+	if (quirk & BYT_CHT_ES8316_SSP0) {
+		custom_map = byt_cht_es8316_ssp0_map;
+		num_routes = ARRAY_SIZE(byt_cht_es8316_ssp0_map);
+	} else {
+		custom_map = byt_cht_es8316_ssp2_map;
+		num_routes = ARRAY_SIZE(byt_cht_es8316_ssp2_map);
+	}
+	ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
+	if (ret)
+		return ret;
+
+	/*
+	 * The firmware might enable the clock at boot (this information
+	 * may or may not be reflected in the enable clock register).
+	 * To change the rate we must disable the clock first to cover these
+	 * cases. Due to common clock framework restrictions that do not allow
+	 * to disable a clock that has not been enabled, we need to enable
+	 * the clock first.
+	 */
+	ret = clk_prepare_enable(priv->mclk);
+	if (!ret)
+		clk_disable_unprepare(priv->mclk);
+
+	ret = clk_set_rate(priv->mclk, 19200000);
+	if (ret)
+		dev_err(card->dev, "unable to set MCLK rate\n");
+
+	ret = clk_prepare_enable(priv->mclk);
+	if (ret)
+		dev_err(card->dev, "unable to enable MCLK\n");
+
+	ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(runtime, 0), 0, 19200000,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(card->dev, "can't set codec clock %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new_pins(card, "Headset",
+					 SND_JACK_HEADSET | SND_JACK_BTN_0,
+					 &priv->jack, byt_cht_es8316_jack_pins,
+					 ARRAY_SIZE(byt_cht_es8316_jack_pins));
+	if (ret) {
+		dev_err(card->dev, "jack creation failed %d\n", ret);
+		return ret;
+	}
+
+	snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_soc_component_set_jack(codec, &priv->jack, NULL);
+
+	return 0;
+}
+
+static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+						SNDRV_PCM_HW_PARAM_CHANNELS);
+	int ret, bits;
+
+	/* The DSP will covert the FE rate to 48k, stereo */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = 2;
+
+	if (quirk & BYT_CHT_ES8316_SSP0) {
+		/* set SSP0 to 16-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+		bits = 16;
+	} else {
+		/* set SSP2 to 24-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+		bits = 24;
+	}
+
+	/*
+	 * Default mode for SSP configuration is TDM 4 slot, override config
+	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
+	 * dai_set_tdm_slot() since there is no other API exposed
+	 */
+	ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
+				SND_SOC_DAIFMT_I2S     |
+				SND_SOC_DAIFMT_NB_NF   |
+				SND_SOC_DAIFMT_BP_FP
+		);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int byt_cht_es8316_aif1_startup(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_hw_constraint_single(substream->runtime,
+			SNDRV_PCM_HW_PARAM_RATE, 48000);
+}
+
+static const struct snd_soc_ops byt_cht_es8316_aif1_ops = {
+	.startup = byt_cht_es8316_aif1_startup,
+};
+
+SND_SOC_DAILINK_DEF(dummy,
+	DAILINK_COMP_ARRAY(COMP_DUMMY()));
+
+SND_SOC_DAILINK_DEF(media,
+	DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
+
+SND_SOC_DAILINK_DEF(deepbuffer,
+	DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
+
+SND_SOC_DAILINK_DEF(ssp2_port,
+	DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
+SND_SOC_DAILINK_DEF(ssp2_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-ESSX8316:00", "ES8316 HiFi")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
+
+static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
+	[MERR_DPCM_AUDIO] = {
+		.name = "Audio Port",
+		.stream_name = "Audio",
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &byt_cht_es8316_aif1_ops,
+		SND_SOC_DAILINK_REG(media, dummy, platform),
+	},
+
+	[MERR_DPCM_DEEP_BUFFER] = {
+		.name = "Deep-Buffer Audio Port",
+		.stream_name = "Deep-Buffer Audio",
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.ops = &byt_cht_es8316_aif1_ops,
+		SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
+	},
+
+		/* back ends */
+	{
+		.name = "SSP2-Codec",
+		.id = 0,
+		.no_pcm = 1,
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+						| SND_SOC_DAIFMT_CBC_CFC,
+		.be_hw_params_fixup = byt_cht_es8316_codec_fixup,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.init = byt_cht_es8316_init,
+		SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
+	},
+};
+
+
+/* SoC card */
+static char codec_name[SND_ACPI_I2C_ID_LEN];
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
+static char long_name[50]; /* = "bytcht-es8316-*-spk-*-mic" */
+#endif
+static char components_string[32]; /* = "cfg-spk:* cfg-mic:* */
+
+static int byt_cht_es8316_suspend(struct snd_soc_card *card)
+{
+	struct snd_soc_component *component;
+
+	for_each_card_components(card, component) {
+		if (!strcmp(component->name, codec_name)) {
+			dev_dbg(component->dev, "disabling jack detect before suspend\n");
+			snd_soc_component_set_jack(component, NULL, NULL);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int byt_cht_es8316_resume(struct snd_soc_card *card)
+{
+	struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_component *component;
+
+	for_each_card_components(card, component) {
+		if (!strcmp(component->name, codec_name)) {
+			dev_dbg(component->dev, "re-enabling jack detect after resume\n");
+			snd_soc_component_set_jack(component, &priv->jack, NULL);
+			break;
+		}
+	}
+
+	/*
+	 * Some Cherry Trail boards with an ES8316 codec have a bug in their
+	 * ACPI tables where the MSSL1680 touchscreen's _PS0 and _PS3 methods
+	 * wrongly also set the speaker-enable GPIO to 1/0. Testing has shown
+	 * that this really is a bug and the GPIO has no influence on the
+	 * touchscreen at all.
+	 *
+	 * The silead.c touchscreen driver does not support runtime suspend, so
+	 * the GPIO can only be changed underneath us during a system suspend.
+	 * This resume() function runs from a pm complete() callback, and thus
+	 * is guaranteed to run after the touchscreen driver/ACPI-subsys has
+	 * brought the touchscreen back up again (and thus changed the GPIO).
+	 *
+	 * So to work around this we pass GPIOD_FLAGS_BIT_NONEXCLUSIVE when
+	 * requesting the GPIO and we set its value here to undo any changes
+	 * done by the touchscreen's broken _PS0 ACPI method.
+	 */
+	gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
+
+	return 0;
+}
+
+/* use space before codec name to simplify card ID, and simplify driver name */
+#define SOF_CARD_NAME "bytcht es8316" /* card name will be 'sof-bytcht es8316' */
+#define SOF_DRIVER_NAME "SOF"
+
+#define CARD_NAME "bytcht-es8316"
+#define DRIVER_NAME NULL /* card name will be used for driver name */
+
+static struct snd_soc_card byt_cht_es8316_card = {
+	.owner = THIS_MODULE,
+	.dai_link = byt_cht_es8316_dais,
+	.num_links = ARRAY_SIZE(byt_cht_es8316_dais),
+	.dapm_widgets = byt_cht_es8316_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(byt_cht_es8316_widgets),
+	.dapm_routes = byt_cht_es8316_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(byt_cht_es8316_audio_map),
+	.controls = byt_cht_es8316_controls,
+	.num_controls = ARRAY_SIZE(byt_cht_es8316_controls),
+	.fully_routed = true,
+	.suspend_pre = byt_cht_es8316_suspend,
+	.resume_post = byt_cht_es8316_resume,
+};
+
+static const struct acpi_gpio_params first_gpio = { 0, 0, false };
+
+static const struct acpi_gpio_mapping byt_cht_es8316_gpios[] = {
+	{ "speaker-enable-gpios", &first_gpio, 1 },
+	{ },
+};
+
+/* Please keep this list alphabetically sorted */
+static const struct dmi_system_id byt_cht_es8316_quirk_table[] = {
+	{	/* Irbis NB41 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NB41"),
+		},
+		.driver_data = (void *)(BYT_CHT_ES8316_SSP0
+					| BYT_CHT_ES8316_INTMIC_IN2_MAP
+					| BYT_CHT_ES8316_JD_INVERTED),
+	},
+	{	/* Nanote UMPC-01 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "RWC CO.,LTD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "UMPC-01"),
+		},
+		.driver_data = (void *)BYT_CHT_ES8316_INTMIC_IN1_MAP,
+	},
+	{	/* Teclast X98 Plus II */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"),
+		},
+		.driver_data = (void *)(BYT_CHT_ES8316_INTMIC_IN1_MAP
+					| BYT_CHT_ES8316_JD_INVERTED),
+	},
+	{}
+};
+
+static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	static const char * const mic_name[] = { "in1", "in2" };
+	struct snd_soc_acpi_mach *mach = dev_get_platdata(dev);
+	struct property_entry props[MAX_NO_PROPS] = {};
+	struct byt_cht_es8316_private *priv;
+	const struct dmi_system_id *dmi_id;
+	struct fwnode_handle *fwnode;
+	const char *platform_name;
+	struct acpi_device *adev;
+	struct device *codec_dev;
+	bool sof_parent;
+	unsigned int cnt = 0;
+	int dai_index = 0;
+	int i;
+	int ret = 0;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* fix index of codec dai */
+	for (i = 0; i < ARRAY_SIZE(byt_cht_es8316_dais); i++) {
+		if (!strcmp(byt_cht_es8316_dais[i].codecs->name,
+			    "i2c-ESSX8316:00")) {
+			dai_index = i;
+			break;
+		}
+	}
+
+	/* fixup codec name based on HID */
+	adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
+	if (adev) {
+		snprintf(codec_name, sizeof(codec_name),
+			 "i2c-%s", acpi_dev_name(adev));
+		byt_cht_es8316_dais[dai_index].codecs->name = codec_name;
+	} else {
+		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
+		return -ENXIO;
+	}
+
+	codec_dev = acpi_get_first_physical_node(adev);
+	acpi_dev_put(adev);
+	if (!codec_dev)
+		return -EPROBE_DEFER;
+	priv->codec_dev = get_device(codec_dev);
+
+	/* override platform name, if required */
+	byt_cht_es8316_card.dev = dev;
+	platform_name = mach->mach_params.platform;
+
+	ret = snd_soc_fixup_dai_links_platform_name(&byt_cht_es8316_card,
+						    platform_name);
+	if (ret) {
+		put_device(codec_dev);
+		return ret;
+	}
+
+	/* Check for BYTCR or other platform and setup quirks */
+	dmi_id = dmi_first_match(byt_cht_es8316_quirk_table);
+	if (dmi_id) {
+		quirk = (unsigned long)dmi_id->driver_data;
+	} else if (soc_intel_is_byt() &&
+		   mach->mach_params.acpi_ipc_irq_index == 0) {
+		/* On BYTCR default to SSP0, internal-mic-in2-map, mono-spk */
+		quirk = BYT_CHT_ES8316_SSP0 | BYT_CHT_ES8316_INTMIC_IN2_MAP |
+			BYT_CHT_ES8316_MONO_SPEAKER;
+	} else {
+		/* Others default to internal-mic-in1-map, mono-speaker */
+		quirk = BYT_CHT_ES8316_INTMIC_IN1_MAP |
+			BYT_CHT_ES8316_MONO_SPEAKER;
+	}
+	if (quirk_override != -1) {
+		dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n",
+			 quirk, quirk_override);
+		quirk = quirk_override;
+	}
+	log_quirks(dev);
+
+	if (quirk & BYT_CHT_ES8316_SSP0)
+		byt_cht_es8316_dais[dai_index].cpus->dai_name = "ssp0-port";
+
+	/* get the clock */
+	priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
+	if (IS_ERR(priv->mclk)) {
+		put_device(codec_dev);
+		return dev_err_probe(dev, PTR_ERR(priv->mclk), "clk_get pmc_plt_clk_3 failed\n");
+	}
+
+	if (quirk & BYT_CHT_ES8316_JD_INVERTED)
+		props[cnt++] = PROPERTY_ENTRY_BOOL("everest,jack-detect-inverted");
+
+	if (cnt) {
+		fwnode = fwnode_create_software_node(props, NULL);
+		if (IS_ERR(fwnode)) {
+			put_device(codec_dev);
+			return PTR_ERR(fwnode);
+		}
+
+		ret = device_add_software_node(codec_dev, to_software_node(fwnode));
+
+		fwnode_handle_put(fwnode);
+
+		if (ret) {
+			put_device(codec_dev);
+			return ret;
+		}
+	}
+
+	/* get speaker enable GPIO */
+	devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios);
+	priv->speaker_en_gpio =
+		gpiod_get_optional(codec_dev, "speaker-enable",
+				   /* see comment in byt_cht_es8316_resume() */
+				   GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(priv->speaker_en_gpio)) {
+		ret = dev_err_probe(dev, PTR_ERR(priv->speaker_en_gpio),
+				    "get speaker GPIO failed\n");
+		goto err_put_codec;
+	}
+
+	snprintf(components_string, sizeof(components_string),
+		 "cfg-spk:%s cfg-mic:%s",
+		 (quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "1" : "2",
+		 mic_name[BYT_CHT_ES8316_MAP(quirk)]);
+	byt_cht_es8316_card.components = components_string;
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
+	snprintf(long_name, sizeof(long_name), "bytcht-es8316-%s-spk-%s-mic",
+		 (quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "mono" : "stereo",
+		 mic_name[BYT_CHT_ES8316_MAP(quirk)]);
+	byt_cht_es8316_card.long_name = long_name;
+#endif
+
+	sof_parent = snd_soc_acpi_sof_parent(dev);
+
+	/* set card and driver name */
+	if (sof_parent) {
+		byt_cht_es8316_card.name = SOF_CARD_NAME;
+		byt_cht_es8316_card.driver_name = SOF_DRIVER_NAME;
+	} else {
+		byt_cht_es8316_card.name = CARD_NAME;
+		byt_cht_es8316_card.driver_name = DRIVER_NAME;
+	}
+
+	/* set pm ops */
+	if (sof_parent)
+		dev->driver->pm = &snd_soc_pm_ops;
+
+	/* register the soc card */
+	snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
+
+	ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card);
+	if (ret) {
+		gpiod_put(priv->speaker_en_gpio);
+		dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
+		goto err_put_codec;
+	}
+	platform_set_drvdata(pdev, &byt_cht_es8316_card);
+	return 0;
+
+err_put_codec:
+	device_remove_software_node(priv->codec_dev);
+	put_device(priv->codec_dev);
+	return ret;
+}
+
+static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
+
+	gpiod_put(priv->speaker_en_gpio);
+	device_remove_software_node(priv->codec_dev);
+	put_device(priv->codec_dev);
+	return 0;
+}
+
+static struct platform_driver snd_byt_cht_es8316_mc_driver = {
+	.driver = {
+		.name = "bytcht_es8316",
+	},
+	.probe = snd_byt_cht_es8316_mc_probe,
+	.remove = snd_byt_cht_es8316_mc_remove,
+};
+
+module_platform_driver(snd_byt_cht_es8316_mc_driver);
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Machine driver");
+MODULE_AUTHOR("David Yang <yangxiaohua@everest-semi.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bytcht_es8316");