Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 178 insertions, 0 deletions

diff --git a/sound/soc/intel/catpt/registers.h b/sound/soc/intel/catpt/registers.h
new file mode 100644
index 000000000..47280d828
--- /dev/null
+++ b/sound/soc/intel/catpt/registers.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Cezary Rojewski <cezary.rojewski@intel.com>
+ */
+
+#ifndef __SND_SOC_INTEL_CATPT_REGS_H
+#define __SND_SOC_INTEL_CATPT_REGS_H
+
+#include <linux/bitops.h>
+#include <linux/iopoll.h>
+#include <uapi/linux/pci_regs.h>
+
+#define CATPT_SHIM_REGS_SIZE	4096
+#define CATPT_DMA_REGS_SIZE	1024
+#define CATPT_DMA_COUNT		2
+#define CATPT_SSP_REGS_SIZE	512
+
+/* DSP Shim registers */
+
+#define CATPT_SHIM_CS1		0x00
+#define CATPT_SHIM_ISC		0x18
+#define CATPT_SHIM_ISD		0x20
+#define CATPT_SHIM_IMC		0x28
+#define CATPT_SHIM_IMD		0x30
+#define CATPT_SHIM_IPCC		0x38
+#define CATPT_SHIM_IPCD		0x40
+#define CATPT_SHIM_CLKCTL	0x78
+#define CATPT_SHIM_CS2		0x80
+#define CATPT_SHIM_LTRC		0xE0
+#define CATPT_SHIM_HMDC		0xE8
+
+#define CATPT_CS_LPCS		BIT(31)
+#define CATPT_CS_SFCR(ssp)	BIT(27 + (ssp))
+#define CATPT_CS_S1IOCS		BIT(23)
+#define CATPT_CS_S0IOCS		BIT(21)
+#define CATPT_CS_PCE		BIT(15)
+#define CATPT_CS_SDPM(ssp)	BIT(11 + (ssp))
+#define CATPT_CS_STALL		BIT(10)
+#define CATPT_CS_DCS		GENMASK(6, 4)
+/* b100 DSP core & audio fabric high clock */
+#define CATPT_CS_DCS_HIGH	(0x4 << 4)
+#define CATPT_CS_SBCS(ssp)	BIT(2 + (ssp))
+#define CATPT_CS_RST		BIT(1)
+
+#define CATPT_ISC_IPCDB		BIT(1)
+#define CATPT_ISC_IPCCD		BIT(0)
+#define CATPT_ISD_DCPWM		BIT(31)
+#define CATPT_ISD_IPCCB		BIT(1)
+#define CATPT_ISD_IPCDD		BIT(0)
+
+#define CATPT_IMC_IPCDB		BIT(1)
+#define CATPT_IMC_IPCCD		BIT(0)
+#define CATPT_IMD_IPCCB		BIT(1)
+#define CATPT_IMD_IPCDD		BIT(0)
+
+#define CATPT_IPCC_BUSY		BIT(31)
+#define CATPT_IPCC_DONE		BIT(30)
+#define CATPT_IPCD_BUSY		BIT(31)
+#define CATPT_IPCD_DONE		BIT(30)
+
+#define CATPT_CLKCTL_CFCIP	BIT(31)
+#define CATPT_CLKCTL_SMOS	GENMASK(25, 24)
+
+#define CATPT_HMDC_HDDA(e, ch)	BIT(8 * (e) + (ch))
+
+/* defaults to reset SHIM registers to after each power cycle */
+#define CATPT_CS_DEFAULT	0x8480040E
+#define CATPT_ISC_DEFAULT	0x0
+#define CATPT_ISD_DEFAULT	0x0
+#define CATPT_IMC_DEFAULT	0x7FFF0003
+#define CATPT_IMD_DEFAULT	0x7FFF0003
+#define CATPT_IPCC_DEFAULT	0x0
+#define CATPT_IPCD_DEFAULT	0x0
+#define CATPT_CLKCTL_DEFAULT	0x7FF
+#define CATPT_CS2_DEFAULT	0x0
+#define CATPT_LTRC_DEFAULT	0x0
+#define CATPT_HMDC_DEFAULT	0x0
+
+/* PCI Configuration registers */
+
+#define CATPT_PCI_PMCAPID	0x80
+#define CATPT_PCI_PMCS		(CATPT_PCI_PMCAPID + PCI_PM_CTRL)
+#define CATPT_PCI_VDRTCTL0	0xA0
+#define CATPT_PCI_VDRTCTL2	0xA8
+
+#define CATPT_VDRTCTL2_DTCGE	BIT(10)
+#define CATPT_VDRTCTL2_DCLCGE	BIT(1)
+#define CATPT_VDRTCTL2_CGEALL	0xF7F
+
+/* LPT PCI Configuration bits */
+
+#define LPT_VDRTCTL0_DSRAMPGE(b)	BIT(16 + (b))
+#define LPT_VDRTCTL0_DSRAMPGE_MASK	GENMASK(31, 16)
+#define LPT_VDRTCTL0_ISRAMPGE(b)	BIT(6 + (b))
+#define LPT_VDRTCTL0_ISRAMPGE_MASK	GENMASK(15, 6)
+#define LPT_VDRTCTL0_D3SRAMPGD		BIT(2)
+#define LPT_VDRTCTL0_D3PGD		BIT(1)
+#define LPT_VDRTCTL0_APLLSE		BIT(0)
+
+/* WPT PCI Configuration bits */
+
+#define WPT_VDRTCTL0_DSRAMPGE(b)	BIT(12 + (b))
+#define WPT_VDRTCTL0_DSRAMPGE_MASK	GENMASK(31, 12)
+#define WPT_VDRTCTL0_ISRAMPGE(b)	BIT(2 + (b))
+#define WPT_VDRTCTL0_ISRAMPGE_MASK	GENMASK(11, 2)
+#define WPT_VDRTCTL0_D3SRAMPGD		BIT(1)
+#define WPT_VDRTCTL0_D3PGD		BIT(0)
+
+#define WPT_VDRTCTL2_APLLSE		BIT(31)
+
+/* defaults to reset SSP registers to after each power cycle */
+#define CATPT_SSC0_DEFAULT		0x0
+#define CATPT_SSC1_DEFAULT		0x0
+#define CATPT_SSS_DEFAULT		0xF004
+#define CATPT_SSIT_DEFAULT		0x0
+#define CATPT_SSD_DEFAULT		0xC43893A3
+#define CATPT_SSTO_DEFAULT		0x0
+#define CATPT_SSPSP_DEFAULT		0x0
+#define CATPT_SSTSA_DEFAULT		0x0
+#define CATPT_SSRSA_DEFAULT		0x0
+#define CATPT_SSTSS_DEFAULT		0x0
+#define CATPT_SSCR2_DEFAULT		0x0
+#define CATPT_SSPSP2_DEFAULT		0x0
+
+/* Physically the same block, access address differs between host and dsp */
+#define CATPT_DSP_DRAM_OFFSET		0x400000
+#define catpt_to_host_offset(offset)	((offset) & ~(CATPT_DSP_DRAM_OFFSET))
+#define catpt_to_dsp_offset(offset)	((offset) | CATPT_DSP_DRAM_OFFSET)
+
+#define CATPT_MEMBLOCK_SIZE	0x8000
+#define catpt_num_dram(cdev)	(hweight_long((cdev)->spec->dram_mask))
+#define catpt_num_iram(cdev)	(hweight_long((cdev)->spec->iram_mask))
+#define catpt_dram_size(cdev)	(catpt_num_dram(cdev) * CATPT_MEMBLOCK_SIZE)
+#define catpt_iram_size(cdev)	(catpt_num_iram(cdev) * CATPT_MEMBLOCK_SIZE)
+
+/* registry I/O helpers */
+
+#define catpt_shim_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->spec->host_shim_offset)
+#define catpt_dma_addr(cdev, dma) \
+	((cdev)->lpe_ba + (cdev)->spec->host_dma_offset[dma])
+#define catpt_ssp_addr(cdev, ssp) \
+	((cdev)->lpe_ba + (cdev)->spec->host_ssp_offset[ssp])
+#define catpt_inbox_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->ipc.config.inbox_offset)
+#define catpt_outbox_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->ipc.config.outbox_offset)
+
+#define catpt_writel_ssp(cdev, ssp, reg, val) \
+	writel(val, catpt_ssp_addr(cdev, ssp) + (reg))
+
+#define catpt_readl_shim(cdev, reg) \
+	readl(catpt_shim_addr(cdev) + CATPT_SHIM_##reg)
+#define catpt_writel_shim(cdev, reg, val) \
+	writel(val, catpt_shim_addr(cdev) + CATPT_SHIM_##reg)
+#define catpt_updatel_shim(cdev, reg, mask, val) \
+	catpt_writel_shim(cdev, reg, \
+			  (catpt_readl_shim(cdev, reg) & ~(mask)) | (val))
+
+#define catpt_readl_poll_shim(cdev, reg, val, cond, delay_us, timeout_us) \
+	readl_poll_timeout(catpt_shim_addr(cdev) + CATPT_SHIM_##reg, \
+			   val, cond, delay_us, timeout_us)
+
+#define catpt_readl_pci(cdev, reg) \
+	readl(cdev->pci_ba + CATPT_PCI_##reg)
+#define catpt_writel_pci(cdev, reg, val) \
+	writel(val, cdev->pci_ba + CATPT_PCI_##reg)
+#define catpt_updatel_pci(cdev, reg, mask, val) \
+	catpt_writel_pci(cdev, reg, \
+			 (catpt_readl_pci(cdev, reg) & ~(mask)) | (val))
+
+#define catpt_readl_poll_pci(cdev, reg, val, cond, delay_us, timeout_us) \
+	readl_poll_timeout((cdev)->pci_ba + CATPT_PCI_##reg, \
+			   val, cond, delay_us, timeout_us)
+
+#endif