diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /sound/soc/sh/ssi.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'sound/soc/sh/ssi.c')
-rw-r--r-- | sound/soc/sh/ssi.c | 403 |
1 files changed, 403 insertions, 0 deletions
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c new file mode 100644 index 000000000..96cf523c2 --- /dev/null +++ b/sound/soc/sh/ssi.c @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Serial Sound Interface (I2S) support for SH7760/SH7780 +// +// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net> +// +// dont forget to set IPSEL/OMSEL register bits (in your board code) to +// enable SSI output pins! + +/* + * LIMITATIONS: + * The SSI unit has only one physical data line, so full duplex is + * impossible. This can be remedied on the SH7760 by using the + * other SSI unit for recording; however the SH7780 has only 1 SSI + * unit, and its pins are shared with the AC97 unit, among others. + * + * FEATURES: + * The SSI features "compressed mode": in this mode it continuously + * streams PCM data over the I2S lines and uses LRCK as a handshake + * signal. Can be used to send compressed data (AC3/DTS) to a DSP. + * The number of bits sent over the wire in a frame can be adjusted + * and can be independent from the actual sample bit depth. This is + * useful to support TDM mode codecs like the AD1939 which have a + * fixed TDM slot size, regardless of sample resolution. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/soc.h> +#include <asm/io.h> + +#define SSICR 0x00 +#define SSISR 0x04 + +#define CR_DMAEN (1 << 28) +#define CR_CHNL_SHIFT 22 +#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT) +#define CR_DWL_SHIFT 19 +#define CR_DWL_MASK (7 << CR_DWL_SHIFT) +#define CR_SWL_SHIFT 16 +#define CR_SWL_MASK (7 << CR_SWL_SHIFT) +#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */ +#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */ +#define CR_SCKP (1 << 13) /* I2Sclock polarity */ +#define CR_SWSP (1 << 12) /* LRCK polarity */ +#define CR_SPDP (1 << 11) +#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */ +#define CR_PDTA (1 << 9) /* fifo data alignment */ +#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */ +#define CR_BREN (1 << 7) /* clock gating in burst mode */ +#define CR_CKDIV_SHIFT 4 +#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */ +#define CR_MUTE (1 << 3) /* SSI mute */ +#define CR_CPEN (1 << 2) /* compressed mode */ +#define CR_TRMD (1 << 1) /* transmit/receive select */ +#define CR_EN (1 << 0) /* enable SSI */ + +#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg))) + +struct ssi_priv { + unsigned long mmio; + unsigned long sysclk; + int inuse; +} ssi_cpu_data[] = { +#if defined(CONFIG_CPU_SUBTYPE_SH7760) + { + .mmio = 0xFE680000, + }, + { + .mmio = 0xFE690000, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) + { + .mmio = 0xFFE70000, + }, +#else +#error "Unsupported SuperH SoC" +#endif +}; + +/* + * track usage of the SSI; it is simplex-only so prevent attempts of + * concurrent playback + capture. FIXME: any locking required? + */ +static int ssi_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + if (ssi->inuse) { + pr_debug("ssi: already in use!\n"); + return -EBUSY; + } else + ssi->inuse = 1; + return 0; +} + +static void ssi_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + + ssi->inuse = 0; +} + +static int ssi_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + SSIREG(SSICR) |= CR_DMAEN | CR_EN; + break; + case SNDRV_PCM_TRIGGER_STOP: + SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ssi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + unsigned long ssicr = SSIREG(SSICR); + unsigned int bits, channels, swl, recv, i; + + channels = params_channels(params); + bits = params->msbits; + recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1; + + pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr); + pr_debug("bits: %u channels: %u\n", bits, channels); + + ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA | + CR_SWL_MASK); + + /* direction (send/receive) */ + if (!recv) + ssicr |= CR_TRMD; /* transmit */ + + /* channels */ + if ((channels < 2) || (channels > 8) || (channels & 1)) { + pr_debug("ssi: invalid number of channels\n"); + return -EINVAL; + } + ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT; + + /* DATA WORD LENGTH (DWL): databits in audio sample */ + i = 0; + switch (bits) { + case 32: ++i; + case 24: ++i; + case 22: ++i; + case 20: ++i; + case 18: ++i; + case 16: ++i; + ssicr |= i << CR_DWL_SHIFT; + case 8: break; + default: + pr_debug("ssi: invalid sample width\n"); + return -EINVAL; + } + + /* + * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S + * wires. This is usually bits_per_sample x channels/2; i.e. in + * Stereo mode the SWL equals DWL. SWL can be bigger than the + * product of (channels_per_slot x samplebits), e.g. for codecs + * like the AD1939 which only accept 32bit wide TDM slots. For + * "standard" I2S operation we set SWL = chans / 2 * DWL here. + * Waiting for ASoC to get TDM support ;-) + */ + if ((bits > 16) && (bits <= 24)) { + bits = 24; /* these are padded by the SSI */ + /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */ + } + i = 0; + swl = (bits * channels) / 2; + switch (swl) { + case 256: ++i; + case 128: ++i; + case 64: ++i; + case 48: ++i; + case 32: ++i; + case 16: ++i; + ssicr |= i << CR_SWL_SHIFT; + case 8: break; + default: + pr_debug("ssi: invalid system word length computed\n"); + return -EINVAL; + } + + SSIREG(SSICR) = ssicr; + + pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr); + return 0; +} + +static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, + unsigned int freq, int dir) +{ + struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id]; + + ssi->sysclk = freq; + + return 0; +} + +/* + * This divider is used to generate the SSI_SCK (I2S bitclock) from the + * clock at the HAC_BIT_CLK ("oversampling clock") pin. + */ +static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + unsigned long ssicr; + int i; + + i = 0; + ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK; + switch (div) { + case 16: ++i; + case 8: ++i; + case 4: ++i; + case 2: ++i; + SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT); + case 1: break; + default: + pr_debug("ssi: invalid sck divider %d\n", div); + return -EINVAL; + } + + return 0; +} + +static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + unsigned long ssicr = SSIREG(SSICR); + + pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr); + + ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP | + CR_SWS_MASTER | CR_SCK_MASTER); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + case SND_SOC_DAIFMT_RIGHT_J: + ssicr |= CR_DEL | CR_PDTA; + break; + case SND_SOC_DAIFMT_LEFT_J: + ssicr |= CR_DEL; + break; + default: + pr_debug("ssi: unsupported format\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) { + case SND_SOC_DAIFMT_CONT: + break; + case SND_SOC_DAIFMT_GATED: + ssicr |= CR_BREN; + break; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + ssicr |= CR_SCKP; /* sample data at low clkedge */ + break; + case SND_SOC_DAIFMT_NB_IF: + ssicr |= CR_SCKP | CR_SWSP; + break; + case SND_SOC_DAIFMT_IB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + ssicr |= CR_SWSP; /* word select starts low */ + break; + default: + pr_debug("ssi: invalid inversion\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_BC_FC: + break; + case SND_SOC_DAIFMT_BP_FC: + ssicr |= CR_SCK_MASTER; + break; + case SND_SOC_DAIFMT_BC_FP: + ssicr |= CR_SWS_MASTER; + break; + case SND_SOC_DAIFMT_BP_FP: + ssicr |= CR_SWS_MASTER | CR_SCK_MASTER; + break; + default: + pr_debug("ssi: invalid master/secondary configuration\n"); + return -EINVAL; + } + + SSIREG(SSICR) = ssicr; + pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr); + + return 0; +} + +/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in + * Master mode, so really this is board specific; the SSI can do any + * rate with the right bitclk and divider settings. + */ +#define SSI_RATES \ + SNDRV_PCM_RATE_8000_192000 + +/* the SSI can do 8-32 bit samples, with 8 possible channels */ +#define SSI_FMTS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \ + SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE) + +static const struct snd_soc_dai_ops ssi_dai_ops = { + .startup = ssi_startup, + .shutdown = ssi_shutdown, + .trigger = ssi_trigger, + .hw_params = ssi_hw_params, + .set_sysclk = ssi_set_sysclk, + .set_clkdiv = ssi_set_clkdiv, + .set_fmt = ssi_set_fmt, +}; + +static struct snd_soc_dai_driver sh4_ssi_dai[] = { +{ + .name = "ssi-dai.0", + .playback = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .capture = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .ops = &ssi_dai_ops, +}, +#ifdef CONFIG_CPU_SUBTYPE_SH7760 +{ + .name = "ssi-dai.1", + .playback = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .capture = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .ops = &ssi_dai_ops, +}, +#endif +}; + +static const struct snd_soc_component_driver sh4_ssi_component = { + .name = "sh4-ssi", + .legacy_dai_naming = 1, +}; + +static int sh4_soc_dai_probe(struct platform_device *pdev) +{ + return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component, + sh4_ssi_dai, + ARRAY_SIZE(sh4_ssi_dai)); +} + +static struct platform_driver sh4_ssi_driver = { + .driver = { + .name = "sh4-ssi-dai", + }, + + .probe = sh4_soc_dai_probe, +}; + +module_platform_driver(sh4_ssi_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver"); +MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>"); |