Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 589 insertions, 0 deletions

diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
new file mode 100644
index 000000000..98812d51b
--- /dev/null
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com>
+//	    Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
+//	    Rander Wang <rander.wang@intel.com>
+//          Keyon Jie <yang.jie@linux.intel.com>
+//
+
+/*
+ * Hardware interface for HDA DSP code loader
+ */
+
+#include <linux/firmware.h>
+#include <sound/hdaudio_ext.h>
+#include <sound/hda_register.h>
+#include <sound/sof.h>
+#include "ext_manifest.h"
+#include "../ops.h"
+#include "../sof-priv.h"
+#include "hda.h"
+
+static void hda_ssp_set_cbp_cfp(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	const struct sof_intel_dsp_desc *chip = hda->desc;
+	int i;
+
+	/* DSP is powered up, set all SSPs to clock consumer/codec provider mode */
+	for (i = 0; i < chip->ssp_count; i++) {
+		snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
+						 chip->ssp_base_offset
+						 + i * SSP_DEV_MEM_SIZE
+						 + SSP_SSC1_OFFSET,
+						 SSP_SET_CBP_CFP,
+						 SSP_SET_CBP_CFP);
+	}
+}
+
+struct hdac_ext_stream *hda_cl_stream_prepare(struct snd_sof_dev *sdev, unsigned int format,
+					      unsigned int size, struct snd_dma_buffer *dmab,
+					      int direction)
+{
+	struct hdac_ext_stream *hext_stream;
+	struct hdac_stream *hstream;
+	struct pci_dev *pci = to_pci_dev(sdev->dev);
+	int ret;
+
+	hext_stream = hda_dsp_stream_get(sdev, direction, 0);
+
+	if (!hext_stream) {
+		dev_err(sdev->dev, "error: no stream available\n");
+		return ERR_PTR(-ENODEV);
+	}
+	hstream = &hext_stream->hstream;
+	hstream->substream = NULL;
+
+	/* allocate DMA buffer */
+	ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: memory alloc failed: %d\n", ret);
+		goto out_put;
+	}
+
+	hstream->period_bytes = 0;/* initialize period_bytes */
+	hstream->format_val = format;
+	hstream->bufsize = size;
+
+	if (direction == SNDRV_PCM_STREAM_CAPTURE) {
+		ret = hda_dsp_iccmax_stream_hw_params(sdev, hext_stream, dmab, NULL);
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: iccmax stream prepare failed: %d\n", ret);
+			goto out_free;
+		}
+	} else {
+		ret = hda_dsp_stream_hw_params(sdev, hext_stream, dmab, NULL);
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: hdac prepare failed: %d\n", ret);
+			goto out_free;
+		}
+		hda_dsp_stream_spib_config(sdev, hext_stream, HDA_DSP_SPIB_ENABLE, size);
+	}
+
+	return hext_stream;
+
+out_free:
+	snd_dma_free_pages(dmab);
+out_put:
+	hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
+	return ERR_PTR(ret);
+}
+
+/*
+ * first boot sequence has some extra steps.
+ * power on all host managed cores and only unstall/run the boot core to boot the
+ * DSP then turn off all non boot cores (if any) is powered on.
+ */
+int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag, bool imr_boot)
+{
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	const struct sof_intel_dsp_desc *chip = hda->desc;
+	unsigned int status, target_status;
+	u32 flags, ipc_hdr, j;
+	unsigned long mask;
+	char *dump_msg;
+	int ret;
+
+	/* step 1: power up corex */
+	ret = hda_dsp_core_power_up(sdev, chip->host_managed_cores_mask);
+	if (ret < 0) {
+		if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
+			dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n");
+		goto err;
+	}
+
+	hda_ssp_set_cbp_cfp(sdev);
+
+	/* step 2: Send ROM_CONTROL command (stream_tag is ignored for IMR boot) */
+	ipc_hdr = chip->ipc_req_mask | HDA_DSP_ROM_IPC_CONTROL;
+	if (!imr_boot)
+		ipc_hdr |= HDA_DSP_ROM_IPC_PURGE_FW | ((stream_tag - 1) << 9);
+
+	snd_sof_dsp_write(sdev, HDA_DSP_BAR, chip->ipc_req, ipc_hdr);
+
+	/* step 3: unset core 0 reset state & unstall/run core 0 */
+	ret = hda_dsp_core_run(sdev, chip->init_core_mask);
+	if (ret < 0) {
+		if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
+			dev_err(sdev->dev,
+				"error: dsp core start failed %d\n", ret);
+		ret = -EIO;
+		goto err;
+	}
+
+	/* step 4: wait for IPC DONE bit from ROM */
+	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
+					    chip->ipc_ack, status,
+					    ((status & chip->ipc_ack_mask)
+						    == chip->ipc_ack_mask),
+					    HDA_DSP_REG_POLL_INTERVAL_US,
+					    HDA_DSP_INIT_TIMEOUT_US);
+
+	if (ret < 0) {
+		if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
+			dev_err(sdev->dev,
+				"error: %s: timeout for HIPCIE done\n",
+				__func__);
+		goto err;
+	}
+
+	/* set DONE bit to clear the reply IPC message */
+	snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
+				       chip->ipc_ack,
+				       chip->ipc_ack_mask,
+				       chip->ipc_ack_mask);
+
+	/* step 5: power down cores that are no longer needed */
+	ret = hda_dsp_core_reset_power_down(sdev, chip->host_managed_cores_mask &
+					   ~(chip->init_core_mask));
+	if (ret < 0) {
+		if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
+			dev_err(sdev->dev,
+				"error: dsp core x power down failed\n");
+		goto err;
+	}
+
+	/* step 6: enable IPC interrupts */
+	hda_dsp_ipc_int_enable(sdev);
+
+	/*
+	 * step 7:
+	 * - Cold/Full boot: wait for ROM init to proceed to download the firmware
+	 * - IMR boot: wait for ROM firmware entered (firmware booted up from IMR)
+	 */
+	if (imr_boot)
+		target_status = FSR_STATE_FW_ENTERED;
+	else
+		target_status = FSR_STATE_INIT_DONE;
+
+	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
+					chip->rom_status_reg, status,
+					(FSR_TO_STATE_CODE(status) == target_status),
+					HDA_DSP_REG_POLL_INTERVAL_US,
+					chip->rom_init_timeout *
+					USEC_PER_MSEC);
+	if (!ret) {
+		/* set enabled cores mask and increment ref count for cores in init_core_mask */
+		sdev->enabled_cores_mask |= chip->init_core_mask;
+		mask = sdev->enabled_cores_mask;
+		for_each_set_bit(j, &mask, SOF_MAX_DSP_NUM_CORES)
+			sdev->dsp_core_ref_count[j]++;
+		return 0;
+	}
+
+	if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
+		dev_err(sdev->dev,
+			"%s: timeout with rom_status_reg (%#x) read\n",
+			__func__, chip->rom_status_reg);
+
+err:
+	flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX | SOF_DBG_DUMP_OPTIONAL;
+
+	/* after max boot attempts make sure that the dump is printed */
+	if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
+		flags &= ~SOF_DBG_DUMP_OPTIONAL;
+
+	dump_msg = kasprintf(GFP_KERNEL, "Boot iteration failed: %d/%d",
+			     hda->boot_iteration, HDA_FW_BOOT_ATTEMPTS);
+	snd_sof_dsp_dbg_dump(sdev, dump_msg, flags);
+	hda_dsp_core_reset_power_down(sdev, chip->host_managed_cores_mask);
+
+	kfree(dump_msg);
+	return ret;
+}
+
+static int cl_trigger(struct snd_sof_dev *sdev,
+		      struct hdac_ext_stream *hext_stream, int cmd)
+{
+	struct hdac_stream *hstream = &hext_stream->hstream;
+	int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
+
+	/* code loader is special case that reuses stream ops */
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL,
+					1 << hstream->index,
+					1 << hstream->index);
+
+		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
+					sd_offset,
+					SOF_HDA_SD_CTL_DMA_START |
+					SOF_HDA_CL_DMA_SD_INT_MASK,
+					SOF_HDA_SD_CTL_DMA_START |
+					SOF_HDA_CL_DMA_SD_INT_MASK);
+
+		hstream->running = true;
+		return 0;
+	default:
+		return hda_dsp_stream_trigger(sdev, hext_stream, cmd);
+	}
+}
+
+int hda_cl_cleanup(struct snd_sof_dev *sdev, struct snd_dma_buffer *dmab,
+		   struct hdac_ext_stream *hext_stream)
+{
+	struct hdac_stream *hstream = &hext_stream->hstream;
+	int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
+	int ret = 0;
+
+	if (hstream->direction == SNDRV_PCM_STREAM_PLAYBACK)
+		ret = hda_dsp_stream_spib_config(sdev, hext_stream, HDA_DSP_SPIB_DISABLE, 0);
+	else
+		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, sd_offset,
+					SOF_HDA_SD_CTL_DMA_START, 0);
+
+	hda_dsp_stream_put(sdev, hstream->direction, hstream->stream_tag);
+	hstream->running = 0;
+	hstream->substream = NULL;
+
+	/* reset BDL address */
+	snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
+			  sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, 0);
+	snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
+			  sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0);
+
+	snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset, 0);
+	snd_dma_free_pages(dmab);
+	dmab->area = NULL;
+	hstream->bufsize = 0;
+	hstream->format_val = 0;
+
+	return ret;
+}
+
+int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream)
+{
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	const struct sof_intel_dsp_desc *chip = hda->desc;
+	unsigned int reg;
+	int ret, status;
+
+	ret = cl_trigger(sdev, hext_stream, SNDRV_PCM_TRIGGER_START);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: DMA trigger start failed\n");
+		return ret;
+	}
+
+	status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
+					chip->rom_status_reg, reg,
+					(FSR_TO_STATE_CODE(reg) == FSR_STATE_FW_ENTERED),
+					HDA_DSP_REG_POLL_INTERVAL_US,
+					HDA_DSP_BASEFW_TIMEOUT_US);
+
+	/*
+	 * even in case of errors we still need to stop the DMAs,
+	 * but we return the initial error should the DMA stop also fail
+	 */
+
+	if (status < 0) {
+		dev_err(sdev->dev,
+			"%s: timeout with rom_status_reg (%#x) read\n",
+			__func__, chip->rom_status_reg);
+	}
+
+	ret = cl_trigger(sdev, hext_stream, SNDRV_PCM_TRIGGER_STOP);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: DMA trigger stop failed\n");
+		if (!status)
+			status = ret;
+	}
+
+	return status;
+}
+
+int hda_dsp_cl_boot_firmware_iccmax(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_pdata *plat_data = sdev->pdata;
+	struct hdac_ext_stream *iccmax_stream;
+	struct hdac_bus *bus = sof_to_bus(sdev);
+	struct firmware stripped_firmware;
+	struct snd_dma_buffer dmab_bdl;
+	int ret, ret1;
+	u8 original_gb;
+
+	/* save the original LTRP guardband value */
+	original_gb = snd_hdac_chip_readb(bus, VS_LTRP) & HDA_VS_INTEL_LTRP_GB_MASK;
+
+	if (plat_data->fw->size <= plat_data->fw_offset) {
+		dev_err(sdev->dev, "error: firmware size must be greater than firmware offset\n");
+		return -EINVAL;
+	}
+
+	stripped_firmware.size = plat_data->fw->size - plat_data->fw_offset;
+
+	/* prepare capture stream for ICCMAX */
+	iccmax_stream = hda_cl_stream_prepare(sdev, HDA_CL_STREAM_FORMAT, stripped_firmware.size,
+					      &dmab_bdl, SNDRV_PCM_STREAM_CAPTURE);
+	if (IS_ERR(iccmax_stream)) {
+		dev_err(sdev->dev, "error: dma prepare for ICCMAX stream failed\n");
+		return PTR_ERR(iccmax_stream);
+	}
+
+	ret = hda_dsp_cl_boot_firmware(sdev);
+
+	/*
+	 * Perform iccmax stream cleanup. This should be done even if firmware loading fails.
+	 * If the cleanup also fails, we return the initial error
+	 */
+	ret1 = hda_cl_cleanup(sdev, &dmab_bdl, iccmax_stream);
+	if (ret1 < 0) {
+		dev_err(sdev->dev, "error: ICCMAX stream cleanup failed\n");
+
+		/* set return value to indicate cleanup failure */
+		if (!ret)
+			ret = ret1;
+	}
+
+	/* restore the original guardband value after FW boot */
+	snd_hdac_chip_updateb(bus, VS_LTRP, HDA_VS_INTEL_LTRP_GB_MASK, original_gb);
+
+	return ret;
+}
+
+static int hda_dsp_boot_imr(struct snd_sof_dev *sdev)
+{
+	const struct sof_intel_dsp_desc *chip_info;
+	int ret;
+
+	chip_info = get_chip_info(sdev->pdata);
+	if (chip_info->cl_init)
+		ret = chip_info->cl_init(sdev, 0, true);
+	else
+		ret = -EINVAL;
+
+	if (!ret)
+		hda_sdw_process_wakeen(sdev);
+
+	return ret;
+}
+
+int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	struct snd_sof_pdata *plat_data = sdev->pdata;
+	const struct sof_dev_desc *desc = plat_data->desc;
+	const struct sof_intel_dsp_desc *chip_info;
+	struct hdac_ext_stream *hext_stream;
+	struct firmware stripped_firmware;
+	struct snd_dma_buffer dmab;
+	int ret, ret1, i;
+
+	if (hda->imrboot_supported && !sdev->first_boot && !hda->skip_imr_boot) {
+		dev_dbg(sdev->dev, "IMR restore supported, booting from IMR directly\n");
+		hda->boot_iteration = 0;
+		ret = hda_dsp_boot_imr(sdev);
+		if (!ret)
+			return 0;
+
+		dev_warn(sdev->dev, "IMR restore failed, trying to cold boot\n");
+	}
+
+	chip_info = desc->chip_info;
+
+	if (plat_data->fw->size <= plat_data->fw_offset) {
+		dev_err(sdev->dev, "error: firmware size must be greater than firmware offset\n");
+		return -EINVAL;
+	}
+
+	stripped_firmware.data = plat_data->fw->data + plat_data->fw_offset;
+	stripped_firmware.size = plat_data->fw->size - plat_data->fw_offset;
+
+	/* init for booting wait */
+	init_waitqueue_head(&sdev->boot_wait);
+
+	/* prepare DMA for code loader stream */
+	hext_stream = hda_cl_stream_prepare(sdev, HDA_CL_STREAM_FORMAT,
+					    stripped_firmware.size,
+					    &dmab, SNDRV_PCM_STREAM_PLAYBACK);
+	if (IS_ERR(hext_stream)) {
+		dev_err(sdev->dev, "error: dma prepare for fw loading failed\n");
+		return PTR_ERR(hext_stream);
+	}
+
+	memcpy(dmab.area, stripped_firmware.data,
+	       stripped_firmware.size);
+
+	/* try ROM init a few times before giving up */
+	for (i = 0; i < HDA_FW_BOOT_ATTEMPTS; i++) {
+		dev_dbg(sdev->dev,
+			"Attempting iteration %d of Core En/ROM load...\n", i);
+
+		hda->boot_iteration = i + 1;
+		if (chip_info->cl_init)
+			ret = chip_info->cl_init(sdev, hext_stream->hstream.stream_tag, false);
+		else
+			ret = -EINVAL;
+
+		/* don't retry anymore if successful */
+		if (!ret)
+			break;
+	}
+
+	if (i == HDA_FW_BOOT_ATTEMPTS) {
+		dev_err(sdev->dev, "error: dsp init failed after %d attempts with err: %d\n",
+			i, ret);
+		goto cleanup;
+	}
+
+	/*
+	 * When a SoundWire link is in clock stop state, a Slave
+	 * device may trigger in-band wakes for events such as jack
+	 * insertion or acoustic event detection. This event will lead
+	 * to a WAKEEN interrupt, handled by the PCI device and routed
+	 * to PME if the PCI device is in D3. The resume function in
+	 * audio PCI driver will be invoked by ACPI for PME event and
+	 * initialize the device and process WAKEEN interrupt.
+	 *
+	 * The WAKEEN interrupt should be processed ASAP to prevent an
+	 * interrupt flood, otherwise other interrupts, such IPC,
+	 * cannot work normally.  The WAKEEN is handled after the ROM
+	 * is initialized successfully, which ensures power rails are
+	 * enabled before accessing the SoundWire SHIM registers
+	 */
+	if (!sdev->first_boot)
+		hda_sdw_process_wakeen(sdev);
+
+	/*
+	 * Set the boot_iteration to the last attempt, indicating that the
+	 * DSP ROM has been initialized and from this point there will be no
+	 * retry done to boot.
+	 *
+	 * Continue with code loading and firmware boot
+	 */
+	hda->boot_iteration = HDA_FW_BOOT_ATTEMPTS;
+	ret = hda_cl_copy_fw(sdev, hext_stream);
+	if (!ret) {
+		dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
+		hda->skip_imr_boot = false;
+	} else {
+		snd_sof_dsp_dbg_dump(sdev, "Firmware download failed",
+				     SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX);
+		hda->skip_imr_boot = true;
+	}
+
+cleanup:
+	/*
+	 * Perform codeloader stream cleanup.
+	 * This should be done even if firmware loading fails.
+	 * If the cleanup also fails, we return the initial error
+	 */
+	ret1 = hda_cl_cleanup(sdev, &dmab, hext_stream);
+	if (ret1 < 0) {
+		dev_err(sdev->dev, "error: Code loader DSP cleanup failed\n");
+
+		/* set return value to indicate cleanup failure */
+		if (!ret)
+			ret = ret1;
+	}
+
+	/*
+	 * return primary core id if both fw copy
+	 * and stream clean up are successful
+	 */
+	if (!ret)
+		return chip_info->init_core_mask;
+
+	/* disable DSP */
+	snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR,
+				SOF_HDA_REG_PP_PPCTL,
+				SOF_HDA_PPCTL_GPROCEN, 0);
+	return ret;
+}
+
+/* pre fw run operations */
+int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev)
+{
+	/* disable clock gating and power gating */
+	return hda_dsp_ctrl_clock_power_gating(sdev, false);
+}
+
+/* post fw run operations */
+int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
+{
+	int ret;
+
+	if (sdev->first_boot) {
+		struct sof_intel_hda_dev *hdev = sdev->pdata->hw_pdata;
+
+		ret = hda_sdw_startup(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev,
+				"error: could not startup SoundWire links\n");
+			return ret;
+		}
+
+		/* Check if IMR boot is usable */
+		if (!sof_debug_check_flag(SOF_DBG_IGNORE_D3_PERSISTENT) &&
+		    (sdev->fw_ready.flags & SOF_IPC_INFO_D3_PERSISTENT ||
+		     sdev->pdata->ipc_type == SOF_INTEL_IPC4))
+			hdev->imrboot_supported = true;
+	}
+
+	hda_sdw_int_enable(sdev, true);
+
+	/* re-enable clock gating and power gating */
+	return hda_dsp_ctrl_clock_power_gating(sdev, true);
+}
+
+int hda_dsp_ext_man_get_cavs_config_data(struct snd_sof_dev *sdev,
+					 const struct sof_ext_man_elem_header *hdr)
+{
+	const struct sof_ext_man_cavs_config_data *config_data =
+		container_of(hdr, struct sof_ext_man_cavs_config_data, hdr);
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	int i, elem_num;
+
+	/* calculate total number of config data elements */
+	elem_num = (hdr->size - sizeof(struct sof_ext_man_elem_header))
+		   / sizeof(struct sof_config_elem);
+	if (elem_num <= 0) {
+		dev_err(sdev->dev, "cavs config data is inconsistent: %d\n", elem_num);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < elem_num; i++)
+		switch (config_data->elems[i].token) {
+		case SOF_EXT_MAN_CAVS_CONFIG_EMPTY:
+			/* skip empty token */
+			break;
+		case SOF_EXT_MAN_CAVS_CONFIG_CAVS_LPRO:
+			hda->clk_config_lpro = config_data->elems[i].value;
+			dev_dbg(sdev->dev, "FW clock config: %s\n",
+				hda->clk_config_lpro ? "LPRO" : "HPRO");
+			break;
+		case SOF_EXT_MAN_CAVS_CONFIG_OUTBOX_SIZE:
+		case SOF_EXT_MAN_CAVS_CONFIG_INBOX_SIZE:
+			/* These elements are defined but not being used yet. No warn is required */
+			break;
+		default:
+			dev_info(sdev->dev, "unsupported token type: %d\n",
+				 config_data->elems[i].token);
+		}
+
+	return 0;
+}