diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/cpu/idle-states.yaml | 855 |
1 files changed, 855 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml new file mode 100644 index 000000000..fa4d4142a --- /dev/null +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -0,0 +1,855 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpu/idle-states.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Idle states binding description + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + - Anup Patel <anup@brainfault.org> + +description: |+ + ========================================== + 1 - Introduction + ========================================== + + ARM and RISC-V systems contain HW capable of managing power consumption + dynamically, where cores can be put in different low-power states (ranging + from simple wfi to power gating) according to OS PM policies. The CPU states + representing the range of dynamic idle states that a processor can enter at + run-time, can be specified through device tree bindings representing the + parameters required to enter/exit specific idle states on a given processor. + + ========================================== + 2 - ARM idle states + ========================================== + + According to the Server Base System Architecture document (SBSA, [3]), the + power states an ARM CPU can be put into are identified by the following list: + + - Running + - Idle_standby + - Idle_retention + - Sleep + - Off + + The power states described in the SBSA document define the basic CPU states on + top of which ARM platforms implement power management schemes that allow an OS + PM implementation to put the processor in different idle states (which include + states listed above; "off" state is not an idle state since it does not have + wake-up capabilities, hence it is not considered in this document). + + Idle state parameters (e.g. entry latency) are platform specific and need to + be characterized with bindings that provide the required information to OS PM + code so that it can build the required tables and use them at runtime. + + The device tree binding definition for ARM idle states is the subject of this + document. + + ========================================== + 3 - RISC-V idle states + ========================================== + + On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific + suspend (or idle) states (ranging from simple WFI, power gating, etc). The + RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a + standard mechanism for OS to request HART state transitions. + + The platform specific suspend (or idle) states of a hart can be either + retentive or non-rententive in nature. A retentive suspend state will + preserve HART registers and CSR values for all privilege modes whereas + a non-retentive suspend state will not preserve HART registers and CSR + values. + + =========================================== + 4 - idle-states definitions + =========================================== + + Idle states are characterized for a specific system through a set of + timing and energy related properties, that underline the HW behaviour + triggered upon idle states entry and exit. + + The following diagram depicts the CPU execution phases and related timing + properties required to enter and exit an idle state: + + ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__.. + | | | | | + + |<------ entry ------->| + | latency | + |<- exit ->| + | latency | + |<-------- min-residency -------->| + |<------- wakeup-latency ------->| + + Diagram 1: CPU idle state execution phases + + EXEC: Normal CPU execution. + + PREP: Preparation phase before committing the hardware to idle mode + like cache flushing. This is abortable on pending wake-up + event conditions. The abort latency is assumed to be negligible + (i.e. less than the ENTRY + EXIT duration). If aborted, CPU + goes back to EXEC. This phase is optional. If not abortable, + this should be included in the ENTRY phase instead. + + ENTRY: The hardware is committed to idle mode. This period must run + to completion up to IDLE before anything else can happen. + + IDLE: This is the actual energy-saving idle period. This may last + between 0 and infinite time, until a wake-up event occurs. + + EXIT: Period during which the CPU is brought back to operational + mode (EXEC). + + entry-latency: Worst case latency required to enter the idle state. The + exit-latency may be guaranteed only after entry-latency has passed. + + min-residency: Minimum period, including preparation and entry, for a given + idle state to be worthwhile energywise. + + wakeup-latency: Maximum delay between the signaling of a wake-up event and the + CPU being able to execute normal code again. If not specified, this is assumed + to be entry-latency + exit-latency. + + These timing parameters can be used by an OS in different circumstances. + + An idle CPU requires the expected min-residency time to select the most + appropriate idle state based on the expected expiry time of the next IRQ + (i.e. wake-up) that causes the CPU to return to the EXEC phase. + + An operating system scheduler may need to compute the shortest wake-up delay + for CPUs in the system by detecting how long will it take to get a CPU out + of an idle state, e.g.: + + wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) + + In other words, the scheduler can make its scheduling decision by selecting + (e.g. waking-up) the CPU with the shortest wake-up delay. + The wake-up delay must take into account the entry latency if that period + has not expired. The abortable nature of the PREP period can be ignored + if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than + the worst case since it depends on the CPU operating conditions, i.e. caches + state). + + An OS has to reliably probe the wakeup-latency since some devices can enforce + latency constraint guarantees to work properly, so the OS has to detect the + worst case wake-up latency it can incur if a CPU is allowed to enter an + idle state, and possibly to prevent that to guarantee reliable device + functioning. + + The min-residency time parameter deserves further explanation since it is + expressed in time units but must factor in energy consumption coefficients. + + The energy consumption of a cpu when it enters a power state can be roughly + characterised by the following graph: + + | + | + | + e | + n | /--- + e | /------ + r | /------ + g | /----- + y | /------ + | ---- + | /| + | / | + | / | + | / | + | / | + | / | + |/ | + -----|-------+---------------------------------- + 0| 1 time(ms) + + Graph 1: Energy vs time example + + The graph is split in two parts delimited by time 1ms on the X-axis. + The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope + and denotes the energy costs incurred while entering and leaving the idle + state. + The graph curve in the area delimited by X-axis values = {x | x > 1ms } has + shallower slope and essentially represents the energy consumption of the idle + state. + + min-residency is defined for a given idle state as the minimum expected + residency time for a state (inclusive of preparation and entry) after + which choosing that state become the most energy efficient option. A good + way to visualise this, is by taking the same graph above and comparing some + states energy consumptions plots. + + For sake of simplicity, let's consider a system with two idle states IDLE1, + and IDLE2: + + | + | + | + | /-- IDLE1 + e | /--- + n | /---- + e | /--- + r | /-----/--------- IDLE2 + g | /-------/--------- + y | ------------ /---| + | / /---- | + | / /--- | + | / /---- | + | / /--- | + | --- | + | / | + | / | + |/ | time + ---/----------------------------+------------------------ + |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy + | + IDLE2-min-residency + + Graph 2: idle states min-residency example + + In graph 2 above, that takes into account idle states entry/exit energy + costs, it is clear that if the idle state residency time (i.e. time till next + wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state + choice energywise. + + This is mainly down to the fact that IDLE1 entry/exit energy costs are lower + than IDLE2. + + However, the lower power consumption (i.e. shallower energy curve slope) of + idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy + efficient. + + The time at which IDLE2 becomes more energy efficient than IDLE1 (and other + shallower states in a system with multiple idle states) is defined + IDLE2-min-residency and corresponds to the time when energy consumption of + IDLE1 and IDLE2 states breaks even. + + The definitions provided in this section underpin the idle states + properties specification that is the subject of the following sections. + + =========================================== + 5 - idle-states node + =========================================== + + The processor idle states are defined within the idle-states node, which is + a direct child of the cpus node [1] and provides a container where the + processor idle states, defined as device tree nodes, are listed. + + On ARM systems, it is a container of processor idle states nodes. If the + system does not provide CPU power management capabilities, or the processor + just supports idle_standby, an idle-states node is not required. + + =========================================== + 6 - References + =========================================== + + [1] ARM Linux Kernel documentation - CPUs bindings + Documentation/devicetree/bindings/arm/cpus.yaml + + [2] ARM Linux Kernel documentation - PSCI bindings + Documentation/devicetree/bindings/arm/psci.yaml + + [3] ARM Server Base System Architecture (SBSA) + http://infocenter.arm.com/help/index.jsp + + [4] ARM Architecture Reference Manuals + http://infocenter.arm.com/help/index.jsp + + [5] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.rst + + [6] RISC-V Linux Kernel documentation - CPUs bindings + Documentation/devicetree/bindings/riscv/cpus.yaml + + [7] RISC-V Supervisor Binary Interface (SBI) + http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc + +properties: + $nodename: + const: idle-states + + entry-method: + description: | + Usage and definition depend on ARM architecture version. + + On ARM v8 64-bit this property is required. + On ARM 32-bit systems this property is optional + + This assumes that the "enable-method" property is set to "psci" in the cpu + node[5] that is responsible for setting up CPU idle management in the OS + implementation. + const: psci + +patternProperties: + "^(cpu|cluster)-": + type: object + description: | + Each state node represents an idle state description and must be defined + as follows. + + The idle state entered by executing the wfi instruction (idle_standby + SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and + therefore must not be listed. + + In addition to the properties listed above, a state node may require + additional properties specific to the entry-method defined in the + idle-states node. Please refer to the entry-method bindings + documentation for properties definitions. + + properties: + compatible: + enum: + - arm,idle-state + - riscv,idle-state + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the ARM PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function + (i.e. idle states node with entry-method property is set to "psci") + must specify this property. + + riscv,sbi-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + suspend_type parameter to pass to the RISC-V SBI HSM suspend call. + + This property is required in idle state nodes of device tree meant + for RISC-V systems. For more details on the suspend_type parameter + refer the SBI specifiation v0.3 (or higher) [7]. + + local-timer-stop: + description: + If present the CPU local timer control logic is + lost on state entry, otherwise it is retained. + type: boolean + + entry-latency-us: + description: + Worst case latency in microseconds required to enter the idle state. + + exit-latency-us: + description: + Worst case latency in microseconds required to exit the idle state. + The exit-latency-us duration may be guaranteed only after + entry-latency-us has passed. + + min-residency-us: + description: + Minimum residency duration in microseconds, inclusive of preparation + and entry, for this idle state to be considered worthwhile energy wise + (refer to section 2 of this document for a complete description). + + wakeup-latency-us: + description: | + Maximum delay between the signaling of a wake-up event and the CPU + being able to execute normal code again. If omitted, this is assumed + to be equal to: + + entry-latency-us + exit-latency-us + + It is important to supply this value on systems where the duration of + PREP phase (see diagram 1, section 2) is non-neglibigle. In such + systems entry-latency-us + exit-latency-us will exceed + wakeup-latency-us by this duration. + + idle-state-name: + $ref: /schemas/types.yaml#/definitions/string + description: + A string used as a descriptive name for the idle state. + + additionalProperties: false + + required: + - compatible + - entry-latency-us + - exit-latency-us + - min-residency-us + +additionalProperties: false + +examples: + - | + + cpus { + #size-cells = <0>; + #address-cells = <2>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; + }; + + cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; + }; + + idle-states { + entry-method = "psci"; + + CPU_RETENTION_0_0: cpu-retention-0-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + + CLUSTER_RETENTION_0: cluster-retention-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <250>; + wakeup-latency-us = <130>; + }; + + CPU_SLEEP_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <250>; + exit-latency-us = <500>; + min-residency-us = <950>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <600>; + exit-latency-us = <1100>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + + CPU_RETENTION_1_0: cpu-retention-1-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <90>; + }; + + CLUSTER_RETENTION_1: cluster-retention-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <270>; + wakeup-latency-us = <100>; + }; + + CPU_SLEEP_1_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <100>; + min-residency-us = <300>; + wakeup-latency-us = <150>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1200>; + min-residency-us = <3500>; + wakeup-latency-us = <1300>; + }; + }; + }; + + - | + // Example 2 (ARM 32-bit, 8-cpu system, two clusters): + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; + }; + + idle-states { + cpu_sleep_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <200>; + exit-latency-us = <100>; + min-residency-us = <400>; + wakeup-latency-us = <250>; + }; + + cluster_sleep_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <500>; + exit-latency-us = <1500>; + min-residency-us = <2500>; + wakeup-latency-us = <1700>; + }; + + cpu_sleep_1_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <500>; + min-residency-us = <900>; + wakeup-latency-us = <600>; + }; + + cluster_sleep_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <800>; + exit-latency-us = <2000>; + min-residency-us = <6500>; + wakeup-latency-us = <2300>; + }; + }; + }; + + - | + // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters): + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "riscv"; + reg = <0x0>; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>, + <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>; + + cpu_intc0: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "riscv"; + reg = <0x1>; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>, + <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>; + + cpu_intc1: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@10 { + device_type = "cpu"; + compatible = "riscv"; + reg = <0x10>; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>, + <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>; + + cpu_intc10: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu@11 { + device_type = "cpu"; + compatible = "riscv"; + reg = <0x11>; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>, + <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>; + + cpu_intc11: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + idle-states { + CPU_RET_0_0: cpu-retentive-0-0 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x10000000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + + CPU_NONRET_0_0: cpu-nonretentive-0-0 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x90000000>; + entry-latency-us = <250>; + exit-latency-us = <500>; + min-residency-us = <950>; + }; + + CLUSTER_RET_0: cluster-retentive-0 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x11000000>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <250>; + wakeup-latency-us = <130>; + }; + + CLUSTER_NONRET_0: cluster-nonretentive-0 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x91000000>; + local-timer-stop; + entry-latency-us = <600>; + exit-latency-us = <1100>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + + CPU_RET_1_0: cpu-retentive-1-0 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x10000010>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + + CPU_NONRET_1_0: cpu-nonretentive-1-0 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x90000010>; + entry-latency-us = <250>; + exit-latency-us = <500>; + min-residency-us = <950>; + }; + + CLUSTER_RET_1: cluster-retentive-1 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x11000010>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <250>; + wakeup-latency-us = <130>; + }; + + CLUSTER_NONRET_1: cluster-nonretentive-1 { + compatible = "riscv,idle-state"; + riscv,sbi-suspend-param = <0x91000010>; + local-timer-stop; + entry-latency-us = <600>; + exit-latency-us = <1100>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + }; + }; + +... |