diff options
Diffstat (limited to '')
12 files changed, 1228 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt new file mode 100644 index 000000000..ce91a9197 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt @@ -0,0 +1,76 @@ +Broadcom AVS mail box and interrupt register bindings +===================================================== + +A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem) +references the mailbox register used to communicate with the AVS CPU[1]. The +second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on +the AVS CPU. The interrupt tells the AVS CPU that it needs to process a +command sent to it by a driver. Interrupting the AVS CPU is mandatory for +commands to be processed. + +The interface also requires a reference to the AVS host interrupt controller, +so a driver can react to interrupts generated by the AVS CPU whenever a command +has been processed. See [2] for more information on the brcm,l2-intc node. + +[1] The AVS CPU is an independent co-processor that runs proprietary +firmware. On some SoCs, this firmware supports DFS and DVFS in addition to +Adaptive Voltage Scaling. + +[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml + + +Node brcm,avs-cpu-data-mem +-------------------------- + +Required properties: +- compatible: must include: brcm,avs-cpu-data-mem and + should include: one of brcm,bcm7271-avs-cpu-data-mem or + brcm,bcm7268-avs-cpu-data-mem +- reg: Specifies base physical address and size of the registers. +- interrupts: The interrupt that the AVS CPU will use to interrupt the host + when a command completed. +- interrupt-names: The name of the interrupt used to interrupt the host. + +Optional properties: +- None + +Node brcm,avs-cpu-l2-intr +------------------------- + +Required properties: +- compatible: must include: brcm,avs-cpu-l2-intr and + should include: one of brcm,bcm7271-avs-cpu-l2-intr or + brcm,bcm7268-avs-cpu-l2-intr +- reg: Specifies base physical address and size of the registers. + +Optional properties: +- None + + +Example +======= + + avs_host_l2_intc: interrupt-controller@f04d1200 { + #interrupt-cells = <1>; + compatible = "brcm,l2-intc"; + interrupt-parent = <&intc>; + reg = <0xf04d1200 0x48>; + interrupt-controller; + interrupts = <0x0 0x19 0x0>; + interrupt-names = "avs"; + }; + + avs-cpu-data-mem@f04c4000 { + compatible = "brcm,bcm7271-avs-cpu-data-mem", + "brcm,avs-cpu-data-mem"; + reg = <0xf04c4000 0x60>; + interrupts = <0x1a>; + interrupt-parent = <&avs_host_l2_intc>; + interrupt-names = "sw_intr"; + }; + + avs-cpu-l2-intr@f04d1100 { + compatible = "brcm,bcm7271-avs-cpu-l2-intr", + "brcm,avs-cpu-l2-intr"; + reg = <0xf04d1100 0x10>; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt new file mode 100644 index 000000000..1d7e49167 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt @@ -0,0 +1,61 @@ +Generic cpufreq driver + +It is a generic DT based cpufreq driver for frequency management. It supports +both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share +clock and voltage across all CPUs. + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- None + +Optional properties: +- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for + details. OPPs *must* be supplied either via DT, i.e. this property, or + populated at runtime. +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. +- voltage-tolerance: Specify the CPU voltage tolerance in percentage. +- #cooling-cells: + Please refer to + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml. + +Examples: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; +}; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml new file mode 100644 index 000000000..9cd42a64b --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek's CPUFREQ Bindings + +maintainers: + - Hector Yuan <hector.yuan@mediatek.com> + +description: + CPUFREQ HW is a hardware engine used by MediaTek SoCs to + manage frequency in hardware. It is capable of controlling + frequency for multiple clusters. + +properties: + compatible: + const: mediatek,cpufreq-hw + + reg: + minItems: 1 + maxItems: 2 + description: + Addresses and sizes for the memory of the HW bases in + each frequency domain. Each entry corresponds to + a register bank for each frequency domain present. + + "#performance-domain-cells": + description: + Number of cells in a performance domain specifier. + Set const to 1 here for nodes providing multiple + performance domains. + const: 1 + +required: + - compatible + - reg + - "#performance-domain-cells" + +additionalProperties: false + +examples: + - | + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + performance-domains = <&performance 0>; + reg = <0x000>; + }; + }; + + /* ... */ + + soc { + #address-cells = <2>; + #size-cells = <2>; + + performance: performance-controller@11bc00 { + compatible = "mediatek,cpufreq-hw"; + reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>; + + #performance-domain-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt new file mode 100644 index 000000000..e0a4ba599 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -0,0 +1,250 @@ +Binding for MediaTek's CPUFreq driver +===================================== + +Required properties: +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. +- clock-names: Should contain the following: + "cpu" - The multiplexer for clock input of CPU cluster. + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock + source (usually MAINPLL) when the original CPU PLL is under + transition and not stable yet. + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for + generic clock consumer properties. +- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml + for detail. +- proc-supply: Regulator for Vproc of CPU cluster. + +Optional properties: +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver + needs to do "voltage tracking" to step by step scale up/down Vproc and + Vsram to fit SoC specific needs. When absent, the voltage scaling + flow is handled by hardware, hence no software "voltage tracking" is + needed. +- mediatek,cci: + Used to confirm the link status between cpufreq and mediatek cci. Because + cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs. + To prevent the issue of high frequency and low voltage, we need to use this + property to make sure mediatek cci is ready. + For details of mediatek cci, please refer to + Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml +- #cooling-cells: + For details, please refer to + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml + +Example 1 (MT7623 SoC): + + cpu_opp_table: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1050000>; + }; + + opp-747500000 { + opp-hz = /bits/ 64 <747500000>; + opp-microvolt = <1050000>; + }; + + opp-1040000000 { + opp-hz = /bits/ 64 <1040000000>; + opp-microvolt = <1150000>; + }; + + opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1200000>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1300000>; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + operating-points-v2 = <&cpu_opp_table>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + operating-points-v2 = <&cpu_opp_table>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + operating-points-v2 = <&cpu_opp_table>; + }; + +Example 2 (MT8173 SoC): + cpu_opp_table_a: opp_table_a { + compatible = "operating-points-v2"; + opp-shared; + + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <859000>; + }; + + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <908000>; + }; + + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <983000>; + }; + + opp-1105000000 { + opp-hz = /bits/ 64 <1105000000>; + opp-microvolt = <1009000>; + }; + + opp-1183000000 { + opp-hz = /bits/ 64 <1183000000>; + opp-microvolt = <1028000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <1083000>; + }; + + opp-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <1109000>; + }; + + opp-1573000000 { + opp-hz = /bits/ 64 <1573000000>; + opp-microvolt = <1125000>; + }; + }; + + cpu_opp_table_b: opp_table_b { + compatible = "operating-points-v2"; + opp-shared; + + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <828000>; + }; + + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <867000>; + }; + + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <927000>; + }; + + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <968000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1007000000>; + opp-microvolt = <1028000>; + }; + + opp-1612000000 { + opp-hz = /bits/ 64 <1612000000>; + opp-microvolt = <1049000>; + }; + + opp-1807000000 { + opp-hz = /bits/ 64 <1807000000>; + opp-microvolt = <1089000>; + }; + + opp-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1125000>; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_a>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_a>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA72SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_b>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA72SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table_b>; + }; + + &cpu0 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu1 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; + + &cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml new file mode 100644 index 000000000..24fa3d87a --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. CPUFREQ + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + + CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) + SoCs to manage frequency in hardware. It is capable of controlling frequency + for multiple clusters. + +properties: + compatible: + oneOf: + - description: v1 of CPUFREQ HW + items: + - const: qcom,cpufreq-hw + + - description: v2 of CPUFREQ HW (EPSS) + items: + - enum: + - qcom,sm6375-cpufreq-epss + - qcom,sm8250-cpufreq-epss + - const: qcom,cpufreq-epss + + reg: + minItems: 2 + items: + - description: Frequency domain 0 register region + - description: Frequency domain 1 register region + - description: Frequency domain 2 register region + + reg-names: + minItems: 2 + items: + - const: freq-domain0 + - const: freq-domain1 + - const: freq-domain2 + + clocks: + items: + - description: XO Clock + - description: GPLL0 Clock + + clock-names: + items: + - const: xo + - const: alternate + + '#freq-domain-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#freq-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster + // switch DCVS state together. + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + + cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt new file mode 100644 index 000000000..f3d44984d --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt @@ -0,0 +1,42 @@ +SPEAr cpufreq driver +------------------- + +SPEAr SoC cpufreq driver for CPU frequency scaling. +It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems +which share clock across all CPUs. + +Required properties: +- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the + increasing order. + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, in + unit of nanoseconds. + +Both required and optional properties listed above must be defined under node +/cpus/cpu@0. + +Examples: +-------- +cpus { + + <...> + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + + <...> + + cpufreq_tbl = < 166000 + 200000 + 250000 + 300000 + 400000 + 500000 + 600000 >; + }; + + <...> + +}; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt new file mode 100644 index 000000000..6b0b452ac --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt @@ -0,0 +1,89 @@ +Binding for ST's CPUFreq driver +=============================== + +ST's CPUFreq driver attempts to read 'process' and 'version' attributes +from the SoC, then supplies the OPP framework with 'prop' and 'supported +hardware' information respectively. The framework is then able to read +the DT and operate in the usual way. + +Frequency Scaling only +---------------------- + +No vendor specific driver required for this. + +Located in CPU's node: + +- operating-points : [See: ../power/opp-v1.yaml] + +Example [safe] +-------------- + +cpus { + cpu@0 { + /* kHz uV */ + operating-points = <1500000 0 + 1200000 0 + 800000 0 + 500000 0>; + }; +}; + +Dynamic Voltage and Frequency Scaling (DVFS) +-------------------------------------------- + +This requires the ST CPUFreq driver to supply 'process' and 'version' info. + +Located in CPU's node: + +- operating-points-v2 : [See ../power/opp-v2.yaml] + +Example [unsafe] +---------------- + +cpus { + cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + }; +}; + +cpu0_opp_table: opp_table { + compatible = "operating-points-v2"; + + /* ############################################################### */ + /* # WARNING: Do not attempt to copy/replicate these nodes, # */ + /* # they are only to be supplied by the bootloader !!! # */ + /* ############################################################### */ + opp0 { + /* Major Minor Substrate */ + /* 2 all all */ + opp-supported-hw = <0x00000004 0xffffffff 0xffffffff>; + opp-hz = /bits/ 64 <1500000000>; + clock-latency-ns = <10000000>; + + opp-microvolt-pcode0 = <1200000>; + opp-microvolt-pcode1 = <1200000>; + opp-microvolt-pcode2 = <1200000>; + opp-microvolt-pcode3 = <1200000>; + opp-microvolt-pcode4 = <1170000>; + opp-microvolt-pcode5 = <1140000>; + opp-microvolt-pcode6 = <1100000>; + opp-microvolt-pcode7 = <1070000>; + }; + + opp1 { + /* Major Minor Substrate */ + /* all all all */ + opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>; + opp-hz = /bits/ 64 <1200000000>; + clock-latency-ns = <10000000>; + + opp-microvolt-pcode0 = <1110000>; + opp-microvolt-pcode1 = <1150000>; + opp-microvolt-pcode2 = <1100000>; + opp-microvolt-pcode3 = <1080000>; + opp-microvolt-pcode4 = <1040000>; + opp-microvolt-pcode5 = <1020000>; + opp-microvolt-pcode6 = <980000>; + opp-microvolt-pcode7 = <930000>; + }; +}; diff --git a/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt new file mode 100644 index 000000000..87bff5add --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt @@ -0,0 +1,37 @@ +i.MX CPUFreq-DT OPP bindings +================================ + +Certain i.MX SoCs support different OPPs depending on the "market segment" and +"speed grading" value which are written in fuses. These bits are combined with +the opp-supported-hw values for each OPP to check if the OPP is allowed. + +Required properties: +-------------------- + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitmaps indicating: + - Supported speed grade mask + - Supported market segment mask + 0: Consumer + 1: Extended Consumer + 2: Industrial + 3: Automotive + +Example: +-------- + +opp_table { + compatible = "operating-points-v2"; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + /* grade >= 0, consumer only */ + opp-supported-hw = <0xf>, <0x3>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000>; + /* grade >= 1, all segments */ + opp-supported-hw = <0xe>, <0x7>; + }; +} diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt new file mode 100644 index 000000000..03196d5ea --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt @@ -0,0 +1,40 @@ +Tegra124 CPU frequency scaling driver bindings +---------------------------------------------- + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - cpu_g: Clock mux for the fast CPU cluster. + - pll_x: Fast PLL clocksource. + - pll_p: Auxiliary PLL used during fast PLL rate changes. + - dfll: Fast DFLL clocksource that also automatically scales CPU voltage. + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. + +Example: +-------- +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, + <&tegra_car TEGRA124_CLK_PLL_X>, + <&tegra_car TEGRA124_CLK_PLL_P>, + <&dfll>; + clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; + clock-latency = <300000>; + }; + + <...> +}; diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt new file mode 100644 index 000000000..bdbfd7c36 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -0,0 +1,56 @@ +Binding for NVIDIA Tegra20 CPUFreq +================================== + +Required properties: +- clocks: Must contain an entry for the CPU clock. + See ../clocks/clock-bindings.txt for details. +- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details. +- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details. + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + On Tegra20: + 1. CPU process ID mask + 2. SoC speedo ID mask + + On Tegra30: + 1. CPU process ID mask + 2. CPU speedo ID mask + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +- opp-microvolt: CPU voltage triplet. + +Optional properties: +- cpu-supply: Phandle to the CPU power supply. + +Example: + regulators { + cpu_reg: regulator0 { + regulator-name = "vdd_cpu"; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@456000000 { + clock-latency-ns = <125000>; + opp-microvolt = <825000 825000 1125000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + ... + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&cpu_reg>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml new file mode 100644 index 000000000..a11e1b867 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. NVMEM CPUFreq bindings + +maintainers: + - Ilia Lin <ilia.lin@kernel.org> + +description: | + In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply + voltage is dynamically configured by Core Power Reduction (CPR) depending on + current CPU frequency and efuse values. + CPR provides a power domain with multiple levels that are selected depending + on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level + according to the required OPPs defined in the CPU OPP tables. + +select: + properties: + compatible: + contains: + enum: + - qcom,apq8064 + - qcom,apq8096 + - qcom,ipq8064 + - qcom,msm8939 + - qcom,msm8960 + - qcom,msm8974 + - qcom,msm8996 + - qcom,qcs404 + required: + - compatible + +properties: + cpus: + type: object + + patternProperties: + 'cpu@[0-9a-f]+': + type: object + + properties: + power-domains: + maxItems: 1 + + power-domain-names: + items: + - const: cpr + + required: + - power-domains + - power-domain-names + +patternProperties: + '^opp-table(-[a-z0-9]+)?$': + if: + properties: + compatible: + const: operating-points-v2-kryo-cpu + then: + patternProperties: + '^opp-?[0-9]+$': + required: + - required-opps + +additionalProperties: true + +examples: + - | + / { + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; + compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cpr_opp1>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cpr_opp2>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cpr_opp3>; + }; + }; + + cpr_opp_table: opp-table-cpr { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt new file mode 100644 index 000000000..175805179 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -0,0 +1,132 @@ +TI CPUFreq and OPP bindings +================================ + +Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx +families support different OPPs depending on the silicon variant in use. +The ti-cpufreq driver can use revision and an efuse value from the SoC to +provide the OPP framework with supported hardware information. This is +used to determine which OPPs from the operating-points-v2 table get enabled +when it is parsed by the OPP framework. + +Required properties: +-------------------- +In 'cpus' nodes: +- operating-points-v2: Phandle to the operating-points-v2 table to use. + +In 'operating-points-v2' table: +- compatible: Should be + - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, + omap34xx, omap36xx and am3517 SoCs +- syscon: A phandle pointing to a syscon node representing the control module + register space of the SoC. + +Optional properties: +-------------------- +- "vdd-supply", "vbb-supply": to define two regulators for dra7xx +- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + 1. Which revision of the SoC the OPP is supported by + 2. Which eFuse bits indicate this OPP is available + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +Example: +-------- + +/* From arch/arm/boot/dts/am33xx.dtsi */ +cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; +}; + +/* + * cpu0 has different OPPs depending on SoC revision and some on revisions + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not + */ +cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + /* + * The three following nodes are marked with opp-suspend + * because they can not be enabled simultaneously on a + * single SoC. + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100-275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; +}; |