diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml new file mode 100644 index 000000000..d433e496e --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP2+ and K3 Mailbox devices + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + The OMAP Mailbox hardware facilitates communication between different + processors using a queued mailbox interrupt mechanism. The IP block is + external to the various processor subsystems and is connected on an + interconnect bus. The communication is achieved through a set of registers + for message storage and interrupt configuration registers. + + Each mailbox IP block/cluster has a certain number of h/w fifo queues and + output interrupt lines. An output interrupt line is routed to an interrupt + controller within a processor subsystem, and there can be more than one line + going to a specific processor's interrupt controller. The interrupt line + connections are fixed for an instance and are dictated by the IP integration + into the SoC (excluding the SoCs that have an Interrupt Crossbar or an + Interrupt Router IP). Each interrupt line is programmable through a set of + interrupt configuration registers, and have a rx and tx interrupt source per + h/w fifo. Communication between different processors is achieved through the + appropriate programming of the rx and tx interrupt sources on the appropriate + interrupt lines. + + The number of h/w fifo queues and interrupt lines dictate the usable + registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a + single IP instance. DRA7xx has multiple instances with different number of + h/w fifo queues and interrupt lines between different instances. The interrupt + lines can also be routed to different processor sub-systems on DRA7xx as they + are routed through the Crossbar, a kind of interrupt router/multiplexer. The + K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and + combine multiple clusters into a single IP block present within the Main + NavSS. The interrupt lines from all these clusters are multiplexed and routed + to different processor subsystems over a limited number of common interrupt + output lines of an Interrupt Router. The AM64x SoCS also uses a single IP + block comprising of multiple clusters, but the number of clusters are + smaller, and the interrupt output lines are connected directly to various + processors. + + Mailbox Controller Nodes + ========================= + A Mailbox device node is used to represent a Mailbox IP instance/cluster + within a SoC. The sub-mailboxes (actual communication channels) are + represented as child nodes of this parent node. + + Mailbox Users + ============== + A device needing to communicate with a target processor device should specify + them using the common mailbox binding properties, "mboxes" and the optional + "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt + for details). Each value of the mboxes property should contain a phandle to + the mailbox controller device node and an args specifier that will be the + phandle to the intended sub-mailbox child node to be used for communication. + The equivalent "mbox-names" property value can be used to give a name to the + communication channel to be used by the client user. + +$defs: + omap-mbox-descriptor: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + The omap-mbox-descriptor is made of up of 3 cells and represents a single + uni-directional communication channel. A typical sub-mailbox device uses + two such channels - one for transmitting (Tx) and one for receiving (Rx). + items: + - description: + mailbox fifo id used either for transmitting on ti,mbox-tx channel or + for receiving on ti,mbox-rx channel (fifo_id). This is the hardware + fifo number within a mailbox cluster. + - description: + irq identifier index number to use from the parent's interrupts data. + Should be 0 for most of the cases, a positive index value is seen only + on mailboxes that have multiple interrupt lines connected to the MPU + processor (irq_id). This is an index number in the listed interrupts + property in the DT nodes. + - description: + mailbox user id for identifying the interrupt line associated with + generating a tx/rx fifo interrupt (usr_id). This is the hardware + user id number within a mailbox cluster. + + omap-sub-mailbox: + type: object + description: + The omap-sub-mailbox is a child node within a Mailbox controller device + node and represents the actual communication channel used to send and + receive messages between the host processor and a remote processor. Each + child node should have a unique node name across all the different mailbox + device nodes. + + properties: + ti,mbox-tx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Tx fifo. + + ti,mbox-rx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Rx fifo. + + ti,mbox-send-noirq: + type: boolean + description: + Quirk flag to allow the client user of this sub-mailbox to send + messages without triggering a Tx ready interrupt, and to control + the Tx ticker. Should be used only on sub-mailboxes used to + communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs. + + required: + - ti,mbox-tx + - ti,mbox-rx + +properties: + compatible: + enum: + - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs + - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs + - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs + - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs + - ti,am64-mailbox # for K3 AM64x SoCs + + reg: + maxItems: 1 + + interrupts: + description: + Contains the interrupt information for the mailbox device. The format is + dependent on which interrupt controller the Mailbox device uses. The + number of interrupts listed will at most be the value specified in + ti,mbox-num-users property, but is usually limited by the number of + interrupts reaching the main processor. An interrupt-parent property + is required on SoCs where the interrupt lines are connected through a + Interrupt Router before reaching the main processor's GIC. + + "#mbox-cells": + const: 1 + description: + The specifier is a phandle to an omap-sub-mailbox device. + + ti,mbox-num-users: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of targets (processor devices) that the mailbox device can + interrupt. + + ti,mbox-num-fifos: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of h/w fifo queues within the mailbox IP block. + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + description: + Name of the hwmod associated with the mailbox. This should be defined + in the mailbox node only if the node is not defined as a child node of + a corresponding sysc interconnect node. + + This property is only needed on some legacy OMAP SoCs which have not + yet been converted to the ti,sysc interconnect hierarachy, but is + otherwise considered obsolete. + +patternProperties: + "^mbox-[a-z0-9-]+$": + $ref: "#/$defs/omap-sub-mailbox" + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - ti,mbox-num-users + - ti,mbox-num-fifos + +allOf: + - if: + properties: + compatible: + enum: + - ti,am654-mailbox + - ti,am64-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 16 + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap4-mailbox + then: + properties: + ti,mbox-num-users: + enum: [3, 4] + ti,mbox-num-fifos: + enum: [8, 12] + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap3-mailbox + then: + properties: + ti,mbox-num-users: + const: 2 + ti,mbox-num-fifos: + const: 2 + interrupts: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + enum: + - ti,omap2-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 6 + interrupts: + minItems: 1 + maxItems: 2 + +additionalProperties: false + +examples: + - | + /* OMAP4 */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + + mbox_ipu: mbox-ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox-dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + + dsp { + mboxes = <&mailbox &mbox_dsp>; + }; + + - | + /* AM33xx */ + mailbox1: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x200>; + interrupts = <77>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + + mbox_wkupm3: mbox-wkup-m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + ti,mbox-send-noirq; + }; + }; + + - | + /* AM65x */ + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x31f80000 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; |