diff options
Diffstat (limited to '')
-rw-r--r-- | Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml | 350 |
1 files changed, 350 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml new file mode 100644 index 000000000..75da3e8ee --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml @@ -0,0 +1,350 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Vidya Sagar <vidyas@nvidia.com> + +description: | + This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus + inherits all the common properties defined in snps,dw-pcie.yaml. Some of + the controller instances are dual mode where in they can work either in + Root Port mode or Endpoint mode but one at a time. + + See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device + tree bindings. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie + - nvidia,tegra234-pcie + + reg: + items: + - description: controller's application logic registers + - description: configuration registers + - description: iATU and DMA registers. This is where the iATU (internal + Address Translation Unit) registers of the PCIe core are made + available for software access. + - description: aperture where the Root Port's own configuration + registers are available. + + reg-names: + items: + - const: appl + - const: config + - const: atu_dma + - const: dbi + + interrupts: + items: + - description: controller interrupt + - description: MSI interrupt + + interrupt-names: + items: + - const: intr + - const: msi + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + items: + - const: p2u-0 + - const: p2u-1 + - const: p2u-2 + - const: p2u-3 + - const: p2u-4 + - const: p2u-5 + - const: p2u-6 + - const: p2u-7 + + power-domains: + maxItems: 1 + description: | + A phandle to the node that controls power to the respective PCIe + controller and a specifier name for the PCIe controller. + + Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h" + Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h" + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandles to BPMP controller node followed by + controller ID. Following are the controller IDs for each controller: + + Tegra194 + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + + Tegra234 + + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 + + items: + - items: + - description: phandle to BPMP controller node + - description: PCIe controller ID + maximum: 10 + + nvidia,update-fc-fixup: + description: | + This is a boolean property and needs to be present to improve performance + when a platform is designed in such a way that it satisfies at least one + of the following conditions thereby enabling Root Port to exchange + optimum number of FC (Flow Control) credits with downstream devices: + + NOTE: This is applicable only for Tegra194. + + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and + a) speed is Gen-2 and MPS is 256B + b) speed is >= Gen-3 with any MPS + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be + specified in microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals. + + vpcie3v3-supply: + description: A phandle to the regulator node that supplies 3.3V to the slot + if the platform has one such slot, e.g., x16 slot owned by C5 controller + in p2972-0000 platform. + + vpcie12v-supply: + description: A phandle to the regulator node that supplies 12V to the slot + if the platform has one such slot, e.g., x16 slot owned by C5 controller + in p2972-0000 platform. + + nvidia,enable-srns: + description: | + This boolean property needs to be present if the controller is + configured to operate in SRNS (Separate Reference Clocks with No + Spread-Spectrum Clocking). NOTE: This is applicable only for + Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,enable-ext-refclk: + description: | + This boolean property needs to be present if the controller is + configured to use the reference clocking coming in from an external + clock source instead of using the internal clock source. + + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +unevaluatedProperties: false + +required: + - interrupts + - interrupt-names + - interrupt-map + - interrupt-map-mask + - clocks + - clock-names + - resets + - reset-names + - power-domains + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O */ + <0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01e00000>, /* non-prefetch memory */ + <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */ + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; + + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14160000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */ + <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */ + <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */ + + vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; |