diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml new file mode 100644 index 000000000..a9e227d8b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence Sierra PHY binding + +description: + This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink + multiprotocol combinations including protocols such as PCIe, USB etc. + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,sierra-phy-t0 + - ti,sierra-phy-t0 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 1 + + resets: + minItems: 1 + items: + - description: Sierra PHY reset. + - description: Sierra APB reset. This is optional. + + reset-names: + minItems: 1 + items: + - const: sierra_reset + - const: sierra_apb + + reg: + maxItems: 1 + description: + Offset of the Sierra PHY configuration registers. + + reg-names: + const: serdes + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + items: + - const: cmn_refclk_dig_div + - const: cmn_refclk1_dig_div + - const: pll0_refclk + - const: pll1_refclk + + assigned-clocks: + minItems: 1 + maxItems: 2 + + assigned-clock-parents: + minItems: 1 + maxItems: 2 + + cdns,autoconf: + type: boolean + description: + A boolean property whose presence indicates that the PHY registers will be + configured by hardware. If not present, all sub-node optional properties + must be provided. + +patternProperties: + '^phy@[0-9a-f]$': + type: object + description: + Each group of PHY lanes with a single master lane should be represented as + a sub-node. Note that the actual configuration of each lane is determined + by hardware strapping, and must match the configuration specified here. + properties: + reg: + description: + The master lane number. This is the lowest numbered lane in the lane group. + minimum: 0 + maximum: 15 + + resets: + minItems: 1 + maxItems: 4 + description: + Contains list of resets, one per lane, to get all the link lanes out of reset. + + "#phy-cells": + const: 0 + + cdns,phy-type: + description: + Specifies the type of PHY for which the group of PHY lanes is used. + Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + + cdns,num-lanes: + description: + Number of lanes in this group. The group is made up of consecutive lanes. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16 + + cdns,ssc-mode: + description: + Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, + EXTERNAL_SSC or INTERNAL_SSC. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + required: + - reg + - resets + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + sierra-phy@fd240000 { + compatible = "cdns,sierra-phy-t0"; + reg = <0x0 0xfd240000 0x0 0x40000>; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "sierra_reset", "sierra_apb"; + clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + #address-cells = <1>; + #size-cells = <0>; + pcie0_phy0: phy@0 { + reg = <0>; + resets = <&phyrst 2>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + pcie0_phy1: phy@2 { + reg = <2>; + resets = <&phyrst 4>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + }; + }; |