diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml new file mode 100644 index 000000000..b486f41df --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Pinmux Controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip Pinmux Controller enables the IC to share one PAD + to several functional blocks. The sharing is done by multiplexing + the PAD input/output signals. For each PAD there are several muxing + options with option 0 being used as a GPIO. + + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + The Rockchip pin configuration node is a node of a group of pins which can be + used for a specific device or function. This node represents both mux and + config of the pins in that group. The 'pins' selects the function mode + (also named pin mode) this pin can work on and the 'config' configures + various pad settings such as pull-up, etc. + + The pins are grouped into up to 9 individual pin banks which need to be + defined as gpio sub-nodes of the pinmux controller. + +properties: + compatible: + enum: + - rockchip,px30-pinctrl + - rockchip,rk2928-pinctrl + - rockchip,rk3036-pinctrl + - rockchip,rk3066a-pinctrl + - rockchip,rk3066b-pinctrl + - rockchip,rk3128-pinctrl + - rockchip,rk3188-pinctrl + - rockchip,rk3228-pinctrl + - rockchip,rk3288-pinctrl + - rockchip,rk3308-pinctrl + - rockchip,rk3328-pinctrl + - rockchip,rk3368-pinctrl + - rockchip,rk3399-pinctrl + - rockchip,rk3568-pinctrl + - rockchip,rk3588-pinctrl + - rockchip,rv1108-pinctrl + - rockchip,rv1126-pinctrl + + rockchip,grf: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: + The phandle of the syscon node for the GRF registers. + + rockchip,pmu: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: + The phandle of the syscon node for the PMU registers, + as some SoCs carry parts of the iomux controller registers there. + Required for at least rk3188 and rk3288. On the rk3368 this should + point to the PMUGRF syscon. + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - rockchip,grf + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "gpio@[0-9a-f]+$": + type: object + + $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" + + unevaluatedProperties: false + + "pcfg-[a-z0-9-]+$": + type: object + properties: + bias-disable: true + + bias-pull-down: true + + bias-pull-pin-default: true + + bias-pull-up: true + + drive-strength: + minimum: 0 + maximum: 20 + + input-enable: true + + input-schmitt-enable: true + + output-high: true + + output-low: true + + additionalProperties: false + +additionalProperties: + type: object + additionalProperties: + type: object + properties: + rockchip,pins: + $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + minItems: 1 + items: + items: + - minimum: 0 + maximum: 8 + description: + Pin bank. + - minimum: 0 + maximum: 31 + description: + Pin bank index. + - minimum: 0 + maximum: 10 + description: + Mux 0 means GPIO and mux 1 to N means + the specific device function. + - description: + The phandle of a node contains the generic pinconfig options + to use as described in pinctrl-bindings.txt. + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + + pinctrl: pinctrl { + compatible = "rockchip,rk3066a-pinctrl"; + rockchip,grf = <&grf>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg-pull-default { + bias-pull-pin-default; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, + <1 RK_PB1 1 &pcfg_pull_default>; + }; + }; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mux_uart2>; + pinctrl-0 = <&uart2_xfer>; + pinctrl-names = "default"; + reg-io-width = <1>; + reg-shift = <2>; + }; |