diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml new file mode 100644 index 000000000..da50f0e99 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 remote processor controller bindings + +description: + This document defines the binding for the remoteproc component that loads and + boots firmwares on the ST32MP family chipset. + +maintainers: + - Fabien Dessenne <fabien.dessenne@foss.st.com> + - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> + +properties: + compatible: + const: st,stm32mp1-m4 + + reg: + description: + Address ranges of the RETRAM and MCU SRAM memories used by the remote + processor. + maxItems: 3 + + resets: + maxItems: 1 + + st,syscfg-holdboot: + description: remote processor reset hold boot + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: Phandle of syscon block + - description: The offset of the hold boot setting register + - description: The field mask of the hold boot + + st,syscfg-tz: + description: + Reference to the system configuration which holds the RCC trust zone mode + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: Phandle of syscon block + - description: The offset of the trust zone setting register + - description: The field mask of the trust zone state + + interrupts: + description: Should contain the WWDG1 watchdog reset interrupt + maxItems: 1 + + wakeup-source: true + + mboxes: + description: + This property is required only if the rpmsg/virtio functionality is used. + items: + - description: | + A channel (a) used to communicate through virtqueues with the + remote proc. + Bi-directional channel: + - from local to remote = send message + - from remote to local = send message ack + - description: | + A channel (b) working the opposite direction of channel (a) + - description: | + A channel (c) used by the local proc to notify the remote proc that it + is about to be shut down. + Unidirectional channel: + - from local to remote, where ACK from the remote means that it is + ready for shutdown + - description: | + A channel (d) used by the local proc to notify the remote proc that it + has to stop interprocessor communnication. + Unidirectional channel: + - from local to remote, where ACK from the remote means that communnication + as been stopped on the remote side. + minItems: 1 + + mbox-names: + items: + - const: vq0 + - const: vq1 + - const: shutdown + - const: detach + minItems: 1 + + memory-region: + description: + List of phandles to the reserved memory regions associated with the + remoteproc device. This is variable and describes the memories shared with + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg + vrings, ...). + (see ../reserved-memory/reserved-memory.txt) + + st,syscfg-pdds: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: | + Reference to the system configuration which holds the remote + items: + - items: + - description: Phandle of syscon block + - description: The offset of the power setting register + - description: The field mask of the PDDS selection + + st,syscfg-m4-state: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: | + Reference to the tamp register which exposes the Cortex-M4 state. + items: + - items: + - description: Phandle of syscon block with the tamp register + - description: The offset of the tamp register + - description: The field mask of the Cortex-M4 state + + st,syscfg-rsc-tbl: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: | + Reference to the tamp register which references the Cortex-M4 + resource table address. + items: + - items: + - description: Phandle of syscon block with the tamp register + - description: The offset of the tamp register + - description: The field mask of the Cortex-M4 resource table address + + st,auto-boot: + $ref: /schemas/types.yaml#/definitions/flag + description: + If defined, when remoteproc is probed, it loads the default firmware and + starts the remote processor. + +required: + - compatible + - reg + - resets + - st,syscfg-holdboot + - st,syscfg-tz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/stm32mp1-resets.h> + m4_rproc: m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + resets = <&rcc MCU_R>; + st,syscfg-holdboot = <&rcc 0x10C 0x1>; + st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; + }; + +... |