diff options
Diffstat (limited to 'Documentation/driver-api/nvdimm/firmware-activate.rst')
| -rw-r--r-- | Documentation/driver-api/nvdimm/firmware-activate.rst | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/driver-api/nvdimm/firmware-activate.rst b/Documentation/driver-api/nvdimm/firmware-activate.rst new file mode 100644 index 000000000..7ee7decbb --- /dev/null +++ b/Documentation/driver-api/nvdimm/firmware-activate.rst @@ -0,0 +1,86 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== +NVDIMM Runtime Firmware Activation +================================== + +Some persistent memory devices run a firmware locally on the device / +"DIMM" to perform tasks like media management, capacity provisioning, +and health monitoring. The process of updating that firmware typically +involves a reboot because it has implications for in-flight memory +transactions. However, reboots are disruptive and at least the Intel +persistent memory platform implementation, described by the Intel ACPI +DSM specification [1], has added support for activating firmware at +runtime. + +A native sysfs interface is implemented in libnvdimm to allow platform +to advertise and control their local runtime firmware activation +capability. + +The libnvdimm bus object, ndbusX, implements an ndbusX/firmware/activate +attribute that shows the state of the firmware activation as one of 'idle', +'armed', 'overflow', and 'busy'. + +- idle: + No devices are set / armed to activate firmware + +- armed: + At least one device is armed + +- busy: + In the busy state armed devices are in the process of transitioning + back to idle and completing an activation cycle. + +- overflow: + If the platform has a concept of incremental work needed to perform + the activation it could be the case that too many DIMMs are armed for + activation. In that scenario the potential for firmware activation to + timeout is indicated by the 'overflow' state. + +The 'ndbusX/firmware/activate' property can be written with a value of +either 'live', or 'quiesce'. A value of 'quiesce' triggers the kernel to +run firmware activation from within the equivalent of the hibernation +'freeze' state where drivers and applications are notified to stop their +modifications of system memory. A value of 'live' attempts +firmware activation without this hibernation cycle. The +'ndbusX/firmware/activate' property will be elided completely if no +firmware activation capability is detected. + +Another property 'ndbusX/firmware/capability' indicates a value of +'live' or 'quiesce', where 'live' indicates that the firmware +does not require or inflict any quiesce period on the system to update +firmware. A capability value of 'quiesce' indicates that firmware does +expect and injects a quiet period for the memory controller, but 'live' +may still be written to 'ndbusX/firmware/activate' as an override to +assume the risk of racing firmware update with in-flight device and +application activity. The 'ndbusX/firmware/capability' property will be +elided completely if no firmware activation capability is detected. + +The libnvdimm memory-device / DIMM object, nmemX, implements +'nmemX/firmware/activate' and 'nmemX/firmware/result' attributes to +communicate the per-device firmware activation state. Similar to the +'ndbusX/firmware/activate' attribute, the 'nmemX/firmware/activate' +attribute indicates 'idle', 'armed', or 'busy'. The state transitions +from 'armed' to 'idle' when the system is prepared to activate firmware, +firmware staged + state set to armed, and 'ndbusX/firmware/activate' is +triggered. After that activation event the nmemX/firmware/result +attribute reflects the state of the last activation as one of: + +- none: + No runtime activation triggered since the last time the device was reset + +- success: + The last runtime activation completed successfully. + +- fail: + The last runtime activation failed for device-specific reasons. + +- not_staged: + The last runtime activation failed due to a sequencing error of the + firmware image not being staged. + +- need_reset: + Runtime firmware activation failed, but the firmware can still be + activated via the legacy method of power-cycling the system. + +[1]: https://docs.pmem.io/persistent-memory/ |