diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/driver-api/ptp.rst | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst new file mode 100644 index 000000000..664838ae7 --- /dev/null +++ b/Documentation/driver-api/ptp.rst @@ -0,0 +1,108 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +PTP hardware clock infrastructure for Linux +=========================================== + + This patch set introduces support for IEEE 1588 PTP clocks in + Linux. Together with the SO_TIMESTAMPING socket options, this + presents a standardized method for developing PTP user space + programs, synchronizing Linux with external clocks, and using the + ancillary features of PTP hardware clocks. + + A new class driver exports a kernel interface for specific clock + drivers and a user space interface. The infrastructure supports a + complete set of PTP hardware clock functionality. + + + Basic clock operations + - Set time + - Get time + - Shift the clock by a given offset atomically + - Adjust clock frequency + + + Ancillary clock features + - Time stamp external events + - Period output signals configurable from user space + - Low Pass Filter (LPF) access from user space + - Synchronization of the Linux system time via the PPS subsystem + +PTP hardware clock kernel API +============================= + + A PTP clock driver registers itself with the class driver. The + class driver handles all of the dealings with user space. The + author of a clock driver need only implement the details of + programming the clock hardware. The clock driver notifies the class + driver of asynchronous events (alarms and external time stamps) via + a simple message passing interface. + + The class driver supports multiple PTP clock drivers. In normal use + cases, only one PTP clock is needed. However, for testing and + development, it can be useful to have more than one clock in a + single system, in order to allow performance comparisons. + +PTP hardware clock user space API +================================= + + The class driver also creates a character device for each + registered clock. User space can use an open file descriptor from + the character device as a POSIX clock id and may call + clock_gettime, clock_settime, and clock_adjtime. These calls + implement the basic clock operations. + + User space programs may control the clock using standardized + ioctls. A program may query, enable, configure, and disable the + ancillary clock features. User space can receive time stamped + events via blocking read() and poll(). + +Writing clock drivers +===================== + + Clock drivers include include/linux/ptp_clock_kernel.h and register + themselves by presenting a 'struct ptp_clock_info' to the + registration method. Clock drivers must implement all of the + functions in the interface. If a clock does not offer a particular + ancillary feature, then the driver should just return -EOPNOTSUPP + from those functions. + + Drivers must ensure that all of the methods in interface are + reentrant. Since most hardware implementations treat the time value + as a 64 bit integer accessed as two 32 bit registers, drivers + should use spin_lock_irqsave/spin_unlock_irqrestore to protect + against concurrent access. This locking cannot be accomplished in + class driver, since the lock may also be needed by the clock + driver's interrupt service routine. + +Supported hardware +================== + + * Freescale eTSEC gianfar + + - 2 Time stamp external triggers, programmable polarity (opt. interrupt) + - 2 Alarm registers (optional interrupt) + - 3 Periodic signals (optional interrupt) + + * National DP83640 + + - 6 GPIOs programmable as inputs or outputs + - 6 GPIOs with dedicated functions (LED/JTAG/clock) can also be + used as general inputs or outputs + - GPIO inputs can time stamp external triggers + - GPIO outputs can produce periodic signals + - 1 interrupt pin + + * Intel IXP465 + + - Auxiliary Slave/Master Mode Snapshot (optional interrupt) + - Target Time (optional interrupt) + + * Renesas (IDT) ClockMatrix™ + + - Up to 4 independent PHC channels + - Integrated low pass filter (LPF), access via .adjPhase (compliant to ITU-T G.8273.2) + - Programmable output periodic signals + - Programmable inputs can time stamp external triggers + - Driver and/or hardware configuration through firmware (idtcm.bin) + - LPF settings (bandwidth, phase limiting, automatic holdover, physical layer assist (per ITU-T G.8273.2)) + - Programmable output PTP clocks, any frequency up to 1GHz (to other PHY/MAC time stampers, refclk to ASSPs/SoCs/FPGAs) + - Lock to GNSS input, automatic switching between GNSS and user-space PHC control (optional) |