diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/filesystems/affs.rst | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/Documentation/filesystems/affs.rst b/Documentation/filesystems/affs.rst new file mode 100644 index 000000000..5776cbd5f --- /dev/null +++ b/Documentation/filesystems/affs.rst @@ -0,0 +1,250 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +Overview of Amiga Filesystems +============================= + +Not all varieties of the Amiga filesystems are supported for reading and +writing. The Amiga currently knows six different filesystems: + +============== =============================================================== +DOS\0 The old or original filesystem, not really suited for + hard disks and normally not used on them, either. + Supported read/write. + +DOS\1 The original Fast File System. Supported read/write. + +DOS\2 The old "international" filesystem. International means that + a bug has been fixed so that accented ("international") letters + in file names are case-insensitive, as they ought to be. + Supported read/write. + +DOS\3 The "international" Fast File System. Supported read/write. + +DOS\4 The original filesystem with directory cache. The directory + cache speeds up directory accesses on floppies considerably, + but slows down file creation/deletion. Doesn't make much + sense on hard disks. Supported read only. + +DOS\5 The Fast File System with directory cache. Supported read only. +============== =============================================================== + +All of the above filesystems allow block sizes from 512 to 32K bytes. +Supported block sizes are: 512, 1024, 2048 and 4096 bytes. Larger blocks +speed up almost everything at the expense of wasted disk space. The speed +gain above 4K seems not really worth the price, so you don't lose too +much here, either. + +The muFS (multi user File System) equivalents of the above file systems +are supported, too. + +Mount options for the AFFS +========================== + +protect + If this option is set, the protection bits cannot be altered. + +setuid[=uid] + This sets the owner of all files and directories in the file + system to uid or the uid of the current user, respectively. + +setgid[=gid] + Same as above, but for gid. + +mode=mode + Sets the mode flags to the given (octal) value, regardless + of the original permissions. Directories will get an x + permission if the corresponding r bit is set. + This is useful since most of the plain AmigaOS files + will map to 600. + +nofilenametruncate + The file system will return an error when filename exceeds + standard maximum filename length (30 characters). + +reserved=num + Sets the number of reserved blocks at the start of the + partition to num. You should never need this option. + Default is 2. + +root=block + Sets the block number of the root block. This should never + be necessary. + +bs=blksize + Sets the blocksize to blksize. Valid block sizes are 512, + 1024, 2048 and 4096. Like the root option, this should + never be necessary, as the affs can figure it out itself. + +quiet + The file system will not return an error for disallowed + mode changes. + +verbose + The volume name, file system type and block size will + be written to the syslog when the filesystem is mounted. + +mufs + The filesystem is really a muFS, also it doesn't + identify itself as one. This option is necessary if + the filesystem wasn't formatted as muFS, but is used + as one. + +prefix=path + Path will be prefixed to every absolute path name of + symbolic links on an AFFS partition. Default = "/". + (See below.) + +volume=name + When symbolic links with an absolute path are created + on an AFFS partition, name will be prepended as the + volume name. Default = "" (empty string). + (See below.) + +Handling of the Users/Groups and protection flags +================================================= + +Amiga -> Linux: + +The Amiga protection flags RWEDRWEDHSPARWED are handled as follows: + + - R maps to r for user, group and others. On directories, R implies x. + + - W maps to w. + + - E maps to x. + + - D is ignored. + + - H, S and P are always retained and ignored under Linux. + + - A is cleared when a file is written to. + +User id and group id will be used unless set[gu]id are given as mount +options. Since most of the Amiga file systems are single user systems +they will be owned by root. The root directory (the mount point) of the +Amiga filesystem will be owned by the user who actually mounts the +filesystem (the root directory doesn't have uid/gid fields). + +Linux -> Amiga: + +The Linux rwxrwxrwx file mode is handled as follows: + + - r permission will allow R for user, group and others. + + - w permission will allow W for user, group and others. + + - x permission of the user will allow E for plain files. + + - D will be allowed for user, group and others. + + - All other flags (suid, sgid, ...) are ignored and will + not be retained. + +Newly created files and directories will get the user and group ID +of the current user and a mode according to the umask. + +Symbolic links +============== + +Although the Amiga and Linux file systems resemble each other, there +are some, not always subtle, differences. One of them becomes apparent +with symbolic links. While Linux has a file system with exactly one +root directory, the Amiga has a separate root directory for each +file system (for example, partition, floppy disk, ...). With the Amiga, +these entities are called "volumes". They have symbolic names which +can be used to access them. Thus, symbolic links can point to a +different volume. AFFS turns the volume name into a directory name +and prepends the prefix path (see prefix option) to it. + +Example: +You mount all your Amiga partitions under /amiga/<volume> (where +<volume> is the name of the volume), and you give the option +"prefix=/amiga/" when mounting all your AFFS partitions. (They +might be "User", "WB" and "Graphics", the mount points /amiga/User, +/amiga/WB and /amiga/Graphics). A symbolic link referring to +"User:sc/include/dos/dos.h" will be followed to +"/amiga/User/sc/include/dos/dos.h". + +Examples +======== + +Command line:: + + mount Archive/Amiga/Workbench3.1.adf /mnt -t affs -o loop,verbose + mount /dev/sda3 /Amiga -t affs + +/etc/fstab entry:: + + /dev/sdb5 /amiga/Workbench affs noauto,user,exec,verbose 0 0 + +IMPORTANT NOTE +============== + +If you boot Windows 95 (don't know about 3.x, 98 and NT) while you +have an Amiga harddisk connected to your PC, it will overwrite +the bytes 0x00dc..0x00df of block 0 with garbage, thus invalidating +the Rigid Disk Block. Sheer luck has it that this is an unused +area of the RDB, so only the checksum doesn't match anymore. +Linux will ignore this garbage and recognize the RDB anyway, but +before you connect that drive to your Amiga again, you must +restore or repair your RDB. So please do make a backup copy of it +before booting Windows! + +If the damage is already done, the following should fix the RDB +(where <disk> is the device name). + +DO AT YOUR OWN RISK:: + + dd if=/dev/<disk> of=rdb.tmp count=1 + cp rdb.tmp rdb.fixed + dd if=/dev/zero of=rdb.fixed bs=1 seek=220 count=4 + dd if=rdb.fixed of=/dev/<disk> + +Bugs, Restrictions, Caveats +=========================== + +Quite a few things may not work as advertised. Not everything is +tested, though several hundred MB have been read and written using +this fs. For a most up-to-date list of bugs please consult +fs/affs/Changes. + +By default, filenames are truncated to 30 characters without warning. +'nofilenametruncate' mount option can change that behavior. + +Case is ignored by the affs in filename matching, but Linux shells +do care about the case. Example (with /wb being an affs mounted fs):: + + rm /wb/WRONGCASE + +will remove /mnt/wrongcase, but:: + + rm /wb/WR* + +will not since the names are matched by the shell. + +The block allocation is designed for hard disk partitions. If more +than 1 process writes to a (small) diskette, the blocks are allocated +in an ugly way (but the real AFFS doesn't do much better). This +is also true when space gets tight. + +You cannot execute programs on an OFS (Old File System), since the +program files cannot be memory mapped due to the 488 byte blocks. +For the same reason you cannot mount an image on such a filesystem +via the loopback device. + +The bitmap valid flag in the root block may not be accurate when the +system crashes while an affs partition is mounted. There's currently +no way to fix a garbled filesystem without an Amiga (disk validator) +or manually (who would do this?). Maybe later. + +If you mount affs partitions on system startup, you may want to tell +fsck that the fs should not be checked (place a '0' in the sixth field +of /etc/fstab). + +It's not possible to read floppy disks with a normal PC or workstation +due to an incompatibility with the Amiga floppy controller. + +If you are interested in an Amiga Emulator for Linux, look at + +http://web.archive.org/web/%2E/http://www.freiburg.linux.de/~uae/ |