diff options
Diffstat (limited to 'Documentation/networking/devlink/ice.rst')
| -rw-r--r-- | Documentation/networking/devlink/ice.rst | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst new file mode 100644 index 000000000..0c89ceb89 --- /dev/null +++ b/Documentation/networking/devlink/ice.rst @@ -0,0 +1,256 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +ice devlink support +=================== + +This document describes the devlink features implemented by the ``ice`` +device driver. + +Info versions +============= + +The ``ice`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 5 90 + + * - Name + - Type + - Example + - Description + * - ``board.id`` + - fixed + - K65390-000 + - The Product Board Assembly (PBA) identifier of the board. + * - ``fw.mgmt`` + - running + - 2.1.7 + - 3-digit version number of the management firmware running on the + Embedded Management Processor of the device. It controls the PHY, + link, access to device resources, etc. Intel documentation refers to + this as the EMP firmware. + * - ``fw.mgmt.api`` + - running + - 1.5.1 + - 3-digit version number (major.minor.patch) of the API exported over + the AdminQ by the management firmware. Used by the driver to + identify what commands are supported. Historical versions of the + kernel only displayed a 2-digit version number (major.minor). + * - ``fw.mgmt.build`` + - running + - 0x305d955f + - Unique identifier of the source for the management firmware. + * - ``fw.undi`` + - running + - 1.2581.0 + - Version of the Option ROM containing the UEFI driver. The version is + reported in ``major.minor.patch`` format. The major version is + incremented whenever a major breaking change occurs, or when the + minor version would overflow. The minor version is incremented for + non-breaking changes and reset to 1 when the major version is + incremented. The patch version is normally 0 but is incremented when + a fix is delivered as a patch against an older base Option ROM. + * - ``fw.psid.api`` + - running + - 0.80 + - Version defining the format of the flash contents. + * - ``fw.bundle_id`` + - running + - 0x80002ec0 + - Unique identifier of the firmware image file that was loaded onto + the device. Also referred to as the EETRACK identifier of the NVM. + * - ``fw.app.name`` + - running + - ICE OS Default Package + - The name of the DDP package that is active in the device. The DDP + package is loaded by the driver during initialization. Each + variation of the DDP package has a unique name. + * - ``fw.app`` + - running + - 1.3.1.0 + - The version of the DDP package that is active in the device. Note + that both the name (as reported by ``fw.app.name``) and version are + required to uniquely identify the package. + * - ``fw.app.bundle_id`` + - running + - 0xc0000001 + - Unique identifier for the DDP package loaded in the device. Also + referred to as the DDP Track ID. Can be used to uniquely identify + the specific DDP package. + * - ``fw.netlist`` + - running + - 1.1.2000-6.7.0 + - The version of the netlist module. This module defines the device's + Ethernet capabilities and default settings, and is used by the + management firmware as part of managing link and device + connectivity. + * - ``fw.netlist.build`` + - running + - 0xee16ced7 + - The first 4 bytes of the hash of the netlist module contents. + +Flash Update +============ + +The ``ice`` driver implements support for flash update using the +``devlink-flash`` interface. It supports updating the device flash using a +combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and +``fw.netlist`` components. + +.. list-table:: List of supported overwrite modes + :widths: 5 95 + + * - Bits + - Behavior + * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` + - Do not preserve settings stored in the flash components being + updated. This includes overwriting the port configuration that + determines the number of physical functions the device will + initialize with. + * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` + - Do not preserve either settings or identifiers. Overwrite everything + in the flash with the contents from the provided image, without + performing any preservation. This includes overwriting device + identifying fields such as the MAC address, VPD area, and device + serial number. It is expected that this combination be used with an + image customized for the specific device. + +The ice hardware does not support overwriting only identifiers while +preserving settings, and thus ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` on its +own will be rejected. If no overwrite mask is provided, the firmware will be +instructed to preserve all settings and identifying fields when updating. + +Reload +====== + +The ``ice`` driver supports activating new firmware after a flash update +using ``DEVLINK_CMD_RELOAD`` with the ``DEVLINK_RELOAD_ACTION_FW_ACTIVATE`` +action. + +.. code:: shell + + $ devlink dev reload pci/0000:01:00.0 reload action fw_activate + +The new firmware is activated by issuing a device specific Embedded +Management Processor reset which requests the device to reset and reload the +EMP firmware image. + +The driver does not currently support reloading the driver via +``DEVLINK_RELOAD_ACTION_DRIVER_REINIT``. + +Port split +========== + +The ``ice`` driver supports port splitting only for port 0, as the FW has +a predefined set of available port split options for the whole device. + +A system reboot is required for port split to be applied. + +The following command will select the port split option with 4 ports: + +.. code:: shell + + $ devlink port split pci/0000:16:00.0/0 count 4 + +The list of all available port options will be printed to dynamic debug after +each ``split`` and ``unsplit`` command. The first option is the default. + +.. code:: shell + + ice 0000:16:00.0: Available port split options and max port speeds (Gbps): + ice 0000:16:00.0: Status Split Quad 0 Quad 1 + ice 0000:16:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 + ice 0000:16:00.0: Active 2 100 - - - 100 - - - + ice 0000:16:00.0: 2 50 - 50 - - - - - + ice 0000:16:00.0: Pending 4 25 25 25 25 - - - - + ice 0000:16:00.0: 4 25 25 - - 25 25 - - + ice 0000:16:00.0: 8 10 10 10 10 10 10 10 10 + ice 0000:16:00.0: 1 100 - - - - - - - + +There could be multiple FW port options with the same port split count. When +the same port split count request is issued again, the next FW port option with +the same port split count will be selected. + +``devlink port unsplit`` will select the option with a split count of 1. If +there is no FW option available with split count 1, you will receive an error. + +Regions +======= + +The ``ice`` driver implements the following regions for accessing internal +device data. + +.. list-table:: regions implemented + :widths: 15 85 + + * - Name + - Description + * - ``nvm-flash`` + - The contents of the entire flash chip, sometimes referred to as + the device's Non Volatile Memory. + * - ``device-caps`` + - The contents of the device firmware's capabilities buffer. Useful to + determine the current state and configuration of the device. + +Users can request an immediate capture of a snapshot via the +``DEVLINK_CMD_REGION_NEW`` + +.. code:: shell + + $ devlink region show + pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1 + pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10 + + $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1 + $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 + + $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 + 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 + 0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8 + 0000000000000020 0016 0bb8 0016 1720 0000 0000 c00f 3ffc + 0000000000000030 bada cce5 bada cce5 bada cce5 bada cce5 + + $ devlink region read pci/0000:01:00.0/nvm-flash snapshot 1 address 0 length 16 + 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 + + $ devlink region delete pci/0000:01:00.0/nvm-flash snapshot 1 + + $ devlink region new pci/0000:01:00.0/device-caps snapshot 1 + $ devlink region dump pci/0000:01:00.0/device-caps snapshot 1 + 0000000000000000 01 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00 + 0000000000000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000020 02 00 02 01 32 03 00 00 0a 00 00 00 25 00 00 00 + 0000000000000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000040 04 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000060 05 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000080 06 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000000a0 08 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000000c0 12 00 01 00 01 00 00 00 01 00 01 00 00 00 00 00 + 00000000000000d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000000e0 13 00 01 00 00 01 00 00 00 00 00 00 00 00 00 00 + 00000000000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000100 14 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000120 15 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000140 16 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000160 17 00 01 00 06 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000180 18 00 01 00 01 00 00 00 01 00 00 00 08 00 00 00 + 0000000000000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000001a0 22 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + 00000000000001b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000001c0 40 00 01 00 00 08 00 00 08 00 00 00 00 00 00 00 + 00000000000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00000000000001e0 41 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00 + 00000000000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 0000000000000200 42 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00 + 0000000000000210 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + + $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1 |