diff options
Diffstat (limited to 'Documentation/networking/ethtool-netlink.rst')
| -rw-r--r-- | Documentation/networking/ethtool-netlink.rst | 1790 |
1 files changed, 1790 insertions, 0 deletions
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst new file mode 100644 index 000000000..d578b8bcd --- /dev/null +++ b/Documentation/networking/ethtool-netlink.rst @@ -0,0 +1,1790 @@ +============================= +Netlink interface for ethtool +============================= + + +Basic information +================= + +Netlink interface for ethtool uses generic netlink family ``ethtool`` +(userspace application should use macros ``ETHTOOL_GENL_NAME`` and +``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi +header). This family does not use a specific header, all information in +requests and replies is passed using netlink attributes. + +The ethtool netlink interface uses extended ACK for error and warning +reporting, userspace application developers are encouraged to make these +messages available to user in a suitable way. + +Requests can be divided into three categories: "get" (retrieving information), +"set" (setting parameters) and "action" (invoking an action). + +All "set" and "action" type requests require admin privileges +(``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for +anyone but there are exceptions (where the response contains sensitive +information). In some cases, the request as such is allowed for anyone but +unprivileged users have attributes with sensitive information (e.g. +wake-on-lan password) omitted. + + +Conventions +=========== + +Attributes which represent a boolean value usually use NLA_U8 type so that we +can distinguish three states: "on", "off" and "not present" (meaning the +information is not available in "get" requests or value is not to be changed +in "set" requests). For these attributes, the "true" value should be passed as +number 1 but any non-zero value should be understood as "true" by recipient. +In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way. + +In the message structure descriptions below, if an attribute name is suffixed +with "+", parent nest can contain multiple attributes of the same type. This +implements an array of entries. + +Attributes that need to be filled-in by device drivers and that are dumped to +user space based on whether they are valid or not should not use zero as a +valid value. This avoids the need to explicitly signal the validity of the +attribute in the device driver API. + + +Request header +============== + +Each request or reply message contains a nested attribute with common header. +Structure of this header is + + ============================== ====== ============================= + ``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex + ``ETHTOOL_A_HEADER_DEV_NAME`` string device name + ``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests + ============================== ====== ============================= + +``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the +device message relates to. One of them is sufficient in requests, if both are +used, they must identify the same device. Some requests, e.g. global string +sets, do not require device identification. Most ``GET`` requests also allow +dump requests without device identification to query the same information for +all devices providing it (each device in a separate message). + +``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request +types. The interpretation of these flags is the same for all request types but +the flags may not apply to requests. Recognized flags are: + + ================================= =================================== + ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply + ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT) + ``ETHTOOL_FLAG_STATS`` include optional device statistics + ================================= =================================== + +New request flags should follow the general idea that if the flag is not set, +the behaviour is backward compatible, i.e. requests from old clients not aware +of the flag should be interpreted the way the client expects. A client must +not set flags it does not understand. + + +Bit sets +======== + +For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32`` +type is used. For arbitrary length bitmaps, ethtool netlink uses a nested +attribute with contents of one of two forms: compact (two binary bitmaps +representing bit values and mask of affected bits) and bit-by-bit (list of +bits identified by either index or name). + +Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together +with their values which saves a round trip (when the bitset is passed in a +request) or at least a second request (when the bitset is in a reply). This is +useful for one shot applications like traditional ethtool command. On the +other hand, long running applications like ethtool monitor (displaying +notifications) or network management daemons may prefer fetching the names +only once and using compact form to save message size. Notifications from +ethtool netlink interface always use compact form for bitsets. + +A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK`` +not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests +modifying a bitmap, the former changes the bit set in mask to values set in +value and preserves the rest; the latter sets the bits set in the bitmap and +clears the rest. + +Compact form: nested (bitset) atrribute contents: + + ============================ ====== ============================ + ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list + ``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits + ``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values + ``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits + ============================ ====== ============================ + +Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits +rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte +order, words ordered from least significant to most significant (i.e. the same +way as bitmaps are passed with ioctl interface). + +For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are +mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if +``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair); +if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not +allowed (bitset represents a single bitmap. + +Kernel bit set length may differ from userspace length if older application is +used on newer kernel or vice versa. If userspace bitmap is longer, an error is +issued only if the request actually tries to set values of some bits not +recognized by kernel. + +Bit-by-bit form: nested (bitset) attribute contents: + + +------------------------------------+--------+-----------------------------+ + | ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list | + +------------------------------------+--------+-----------------------------+ + | ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits | + +------------------------------------+--------+-----------------------------+ + | ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits | + +-+----------------------------------+--------+-----------------------------+ + | | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit | + +-+-+--------------------------------+--------+-----------------------------+ + | | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) | + +-+-+--------------------------------+--------+-----------------------------+ + | | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name | + +-+-+--------------------------------+--------+-----------------------------+ + | | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set | + +-+-+--------------------------------+--------+-----------------------------+ + +Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can +only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an +arbitrary number of them. A bit may be identified by its index or by its +name. When used in requests, listed bits are set to 0 or 1 according to +``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if +index exceeds kernel bit length or if name is not recognized. + +When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as +a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in +such case. Such bitset represents a bitmap with listed bits set and the rest +zero. + +In requests, application can use either form. Form used by kernel in reply is +determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request +header. Semantics of value and mask depends on the attribute. + + +List of message types +===================== + +All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix +according to message purpose: + + ============== ====================================== + ``_GET`` userspace request to retrieve data + ``_SET`` userspace request to set data + ``_ACT`` userspace request to perform an action + ``_GET_REPLY`` kernel reply to a ``GET`` request + ``_SET_REPLY`` kernel reply to a ``SET`` request + ``_ACT_REPLY`` kernel reply to an ``ACT`` request + ``_NTF`` kernel notification + ============== ====================================== + +Userspace to kernel: + + ===================================== ================================= + ``ETHTOOL_MSG_STRSET_GET`` get string set + ``ETHTOOL_MSG_LINKINFO_GET`` get link settings + ``ETHTOOL_MSG_LINKINFO_SET`` set link settings + ``ETHTOOL_MSG_LINKMODES_GET`` get link modes info + ``ETHTOOL_MSG_LINKMODES_SET`` set link modes info + ``ETHTOOL_MSG_LINKSTATE_GET`` get link state + ``ETHTOOL_MSG_DEBUG_GET`` get debugging settings + ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings + ``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings + ``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings + ``ETHTOOL_MSG_FEATURES_GET`` get device features + ``ETHTOOL_MSG_FEATURES_SET`` set device features + ``ETHTOOL_MSG_PRIVFLAGS_GET`` get private flags + ``ETHTOOL_MSG_PRIVFLAGS_SET`` set private flags + ``ETHTOOL_MSG_RINGS_GET`` get ring sizes + ``ETHTOOL_MSG_RINGS_SET`` set ring sizes + ``ETHTOOL_MSG_CHANNELS_GET`` get channel counts + ``ETHTOOL_MSG_CHANNELS_SET`` set channel counts + ``ETHTOOL_MSG_COALESCE_GET`` get coalescing parameters + ``ETHTOOL_MSG_COALESCE_SET`` set coalescing parameters + ``ETHTOOL_MSG_PAUSE_GET`` get pause parameters + ``ETHTOOL_MSG_PAUSE_SET`` set pause parameters + ``ETHTOOL_MSG_EEE_GET`` get EEE settings + ``ETHTOOL_MSG_EEE_SET`` set EEE settings + ``ETHTOOL_MSG_TSINFO_GET`` get timestamping info + ``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test + ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test + ``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info + ``ETHTOOL_MSG_FEC_GET`` get FEC settings + ``ETHTOOL_MSG_FEC_SET`` set FEC settings + ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM + ``ETHTOOL_MSG_STATS_GET`` get standard statistics + ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info + ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters + ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters + ``ETHTOOL_MSG_PSE_SET`` set PSE parameters + ``ETHTOOL_MSG_PSE_GET`` get PSE parameters + ===================================== ================================= + +Kernel to userspace: + + ======================================== ================================= + ``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents + ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings + ``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification + ``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info + ``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification + ``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info + ``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings + ``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification + ``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings + ``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification + ``ETHTOOL_MSG_FEATURES_GET_REPLY`` device features + ``ETHTOOL_MSG_FEATURES_SET_REPLY`` optional reply to FEATURES_SET + ``ETHTOOL_MSG_FEATURES_NTF`` netdev features notification + ``ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`` private flags + ``ETHTOOL_MSG_PRIVFLAGS_NTF`` private flags + ``ETHTOOL_MSG_RINGS_GET_REPLY`` ring sizes + ``ETHTOOL_MSG_RINGS_NTF`` ring sizes + ``ETHTOOL_MSG_CHANNELS_GET_REPLY`` channel counts + ``ETHTOOL_MSG_CHANNELS_NTF`` channel counts + ``ETHTOOL_MSG_COALESCE_GET_REPLY`` coalescing parameters + ``ETHTOOL_MSG_COALESCE_NTF`` coalescing parameters + ``ETHTOOL_MSG_PAUSE_GET_REPLY`` pause parameters + ``ETHTOOL_MSG_PAUSE_NTF`` pause parameters + ``ETHTOOL_MSG_EEE_GET_REPLY`` EEE settings + ``ETHTOOL_MSG_EEE_NTF`` EEE settings + ``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info + ``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results + ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results + ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info + ``ETHTOOL_MSG_FEC_GET_REPLY`` FEC settings + ``ETHTOOL_MSG_FEC_NTF`` FEC settings + ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM + ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics + ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info + ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters + ``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters + ======================================== ================================= + +``GET`` requests are sent by userspace applications to retrieve device +information. They usually do not contain any message specific attributes. +Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET`` +request with ``NLM_F_DUMP`` and no device identification can be used to query +the information for all devices supporting the request. + +If the data can be also modified, corresponding ``SET`` message with the same +layout as corresponding ``GET_REPLY`` is used to request changes. Only +attributes where a change is requested are included in such request (also, not +all attributes may be changed). Replies to most ``SET`` request consist only +of error code and extack; if kernel provides additional data, it is sent in +the form of corresponding ``SET_REPLY`` message which can be suppressed by +setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header. + +Data modification also triggers sending a ``NTF`` message with a notification. +These usually bear only a subset of attributes which was affected by the +change. The same notification is issued if the data is modified using other +means (mostly ioctl ethtool interface). Unlike notifications from ethtool +netlink code which are only sent if something actually changed, notifications +triggered by ioctl interface may be sent even if the request did not actually +change any data. + +``ACT`` messages request kernel (driver) to perform a specific action. If some +information is reported by kernel (which can be suppressed by setting +``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of +an ``ACT_REPLY`` message. Performing an action also triggers a notification +(``NTF`` message). + +Later sections describe the format and semantics of these messages. + + +STRSET_GET +========== + +Requests contents of a string set as provided by ioctl commands +``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user +writeable so that the corresponding ``STRSET_SET`` message is only used in +kernel replies. There are two types of string sets: global (independent of +a device, e.g. device feature names) and device specific (e.g. device private +flags). + +Request contents: + + +---------------------------------------+--------+------------------------+ + | ``ETHTOOL_A_STRSET_HEADER`` | nested | request header | + +---------------------------------------+--------+------------------------+ + | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request | + +-+-------------------------------------+--------+------------------------+ + | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | + +-+-+-----------------------------------+--------+------------------------+ + | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | + +-+-+-----------------------------------+--------+------------------------+ + +Kernel response contents: + + +---------------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header | + +---------------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets | + +-+-------------------------------------+--------+-----------------------+ + | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | + +-+-+-----------------------------------+--------+-----------------------+ + | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | + +-+-+-----------------------------------+--------+-----------------------+ + | | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings | + +-+-+-----------------------------------+--------+-----------------------+ + | | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings | + +-+-+-+---------------------------------+--------+-----------------------+ + | | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string | + +-+-+-+-+-------------------------------+--------+-----------------------+ + | | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index | + +-+-+-+-+-------------------------------+--------+-----------------------+ + | | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value | + +-+-+-+-+-------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts | + +---------------------------------------+--------+-----------------------+ + +Device identification in request header is optional. Depending on its presence +a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests: + + - no ``NLM_F_DUMP,`` no device: get "global" stringsets + - no ``NLM_F_DUMP``, with device: get string sets related to the device + - ``NLM_F_DUMP``, no device: get device related string sets for all devices + +If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of +requested type are returned, otherwise only those specified in the request. +Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string +counts of the sets, not the actual strings. + + +LINKINFO_GET +============ + +Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for +link modes and autonegotiation related information. The request does not use +any attributes. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKINFO_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header + ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port + ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address + ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status + ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control + ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver + ==================================== ====== ========================== + +Attributes and their values have the same meaning as matching members of the +corresponding ioctl structures. + +``LINKINFO_GET`` allows dump requests (kernel returns reply message for all +devices supporting the request). + + +LINKINFO_SET +============ + +``LINKINFO_SET`` request allows setting some of the attributes reported by +``LINKINFO_GET``. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKINFO_HEADER`` nested request header + ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port + ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address + ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control + ==================================== ====== ========================== + +MDI(-X) status and transceiver cannot be set, request with the corresponding +attributes is rejected. + + +LINKMODES_GET +============= + +Requests link modes (supported, advertised and peer advertised) and related +information (autonegotiation status, link speed and duplex) as provided by +``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKMODES_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ========================================== ====== ========================== + ``ETHTOOL_A_LINKMODES_HEADER`` nested reply header + ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status + ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes + ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes + ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) + ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state + ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching + ========================================== ====== ========================== + +For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask +represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit +list. + +``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all +devices supporting the request). + + +LINKMODES_SET +============= + +Request contents: + + ========================================== ====== ========================== + ``ETHTOOL_A_LINKMODES_HEADER`` nested request header + ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status + ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes + ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes + ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) + ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode + ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching + ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes + ========================================== ====== ========================== + +``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If +autonegotiation is on (either set now or kept from before), advertised modes +are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one +of speed, duplex and lanes is specified, kernel adjusts advertised modes to all +supported modes matching speed, duplex, lanes or all (whatever is specified). +This autoselection is done on ethtool side with ioctl interface, netlink +interface is supposed to allow requesting changes without knowing what exactly +kernel supports. + + +LINKSTATE_GET +============= + +Requests link state information. Link up/down flag (as provided by +``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might +be provided as well. In general, extended state describes reasons for why a port +is down, or why it operates in some non-obvious mode. This request does not have +any attributes. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKSTATE_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ============================ + ``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header + ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down) + ``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index + ``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value + ``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state + ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate + ==================================== ====== ============================ + +For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns +carrier flag provided by ``netif_carrier_ok()`` but there are drivers which +define their own handler. + +``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are +optional values. ethtool core can provide either both +``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``, +or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them. + +``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all +devices supporting the request). + + +Link extended states: + + ================================================ ============================================ + ``ETHTOOL_LINK_EXT_STATE_AUTONEG`` States relating to the autonegotiation or + issues therein + + ``ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`` Failure during link training + + ``ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`` Logical mismatch in physical coding sublayer + or forward error correction sublayer + + ``ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`` Signal integrity issues + + ``ETHTOOL_LINK_EXT_STATE_NO_CABLE`` No cable connected + + ``ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`` Failure is related to cable, + e.g., unsupported cable + + ``ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`` Failure is related to EEPROM, e.g., failure + during reading or parsing the data + + ``ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`` Failure during calibration algorithm + + ``ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`` The hardware is not able to provide the + power required from cable or module + + ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated + + ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue + ================================================ ============================================ + +Link extended substates: + + Autoneg substates: + + =============================================================== ================================ + ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`` Peer side is down + + ``ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`` Ack not received from peer side + + ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`` Next page exchange failed + + ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`` Peer side is down during force + mode or there is no agreement of + speed + + ``ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`` Forward error correction modes + in both sides are mismatched + + ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`` No Highest Common Denominator + =============================================================== ================================ + + Link training substates: + + =========================================================================== ==================== + ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`` Frames were not + recognized, the + lock failed + + ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`` The lock did not + occur before + timeout + + ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`` Peer side did not + send ready signal + after training + process + + ``ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`` Remote side is not + ready yet + =========================================================================== ==================== + + Link logical mismatch substates: + + ================================================================ =============================== + ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`` Physical coding sublayer was + not locked in first phase - + block lock + + ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`` Physical coding sublayer was + not locked in second phase - + alignment markers lock + + ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`` Physical coding sublayer did + not get align status + + ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`` FC forward error correction is + not locked + + ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`` RS forward error correction is + not locked + ================================================================ =============================== + + Bad signal integrity substates: + + ================================================================= ============================= + ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`` Large number of physical + errors + + ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`` The system attempted to + operate the cable at a rate + that is not formally + supported, which led to + signal integrity issues + + ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`` The external clock signal for + SerDes is too weak or + unavailable. + + ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`` The received signal for + SerDes is too weak because + analog loss of signal. + ================================================================= ============================= + + Cable issue substates: + + =================================================== ============================================ + ``ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`` Unsupported cable + + ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure + =================================================== ============================================ + + Transceiver module issue substates: + + =================================================== ============================================ + ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach + the ModuleReady state. For example, if the + module is stuck at ModuleFault state + =================================================== ============================================ + +DEBUG_GET +========= + +Requests debugging settings of a device. At the moment, only message mask is +provided. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_DEBUG_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_DEBUG_HEADER`` nested reply header + ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask + ==================================== ====== ========================== + +The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as +provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl +interface. While it is called message level there for historical reasons, most +drivers and almost all newer drivers use it as a mask of enabled message +classes (represented by ``NETIF_MSG_*`` constants); therefore netlink +interface follows its actual use in practice. + +``DEBUG_GET`` allows dump requests (kernel returns reply messages for all +devices supporting the request). + + +DEBUG_SET +========= + +Set or update debugging settings of a device. At the moment, only message mask +is supported. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_DEBUG_HEADER`` nested request header + ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask + ==================================== ====== ========================== + +``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of +enabled debugging message types for the device. + + +WOL_GET +======= + +Query device wake-on-lan settings. Unlike most "GET" type requests, +``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it +(potentially) provides SecureOn(tm) password which is confidential. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_WOL_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_WOL_HEADER`` nested reply header + ``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes + ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password + ==================================== ====== ========================== + +In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the +device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only +included in reply if ``WAKE_MAGICSECURE`` mode is supported. + + +WOL_SET +======= + +Set or update wake-on-lan settings. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_WOL_HEADER`` nested request header + ``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes + ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password + ==================================== ====== ========================== + +``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting +``WAKE_MAGICSECURE`` mode. + + +FEATURES_GET +============ + +Gets netdev features like ``ETHTOOL_GFEATURES`` ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_FEATURES_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_FEATURES_HEADER`` nested reply header + ``ETHTOOL_A_FEATURES_HW`` bitset dev->hw_features + ``ETHTOOL_A_FEATURES_WANTED`` bitset dev->wanted_features + ``ETHTOOL_A_FEATURES_ACTIVE`` bitset dev->features + ``ETHTOOL_A_FEATURES_NOCHANGE`` bitset NETIF_F_NEVER_CHANGE + ==================================== ====== ========================== + +Bitmaps in kernel response have the same meaning as bitmaps used in ioctl +interference but attribute names are different (they are based on +corresponding members of struct net_device). Legacy "flags" are not provided, +if userspace needs them (most likely only ethtool for backward compatibility), +it can calculate their values from related feature bits itself. +ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to +provide all names when using verbose bitmap format), the other three use no +mask (simple bit lists). + + +FEATURES_SET +============ + +Request to set netdev features like ``ETHTOOL_SFEATURES`` ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_FEATURES_HEADER`` nested request header + ``ETHTOOL_A_FEATURES_WANTED`` bitset requested features + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_FEATURES_HEADER`` nested reply header + ``ETHTOOL_A_FEATURES_WANTED`` bitset diff wanted vs. result + ``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active + ==================================== ====== ========================== + +Request constains only one bitset which can be either value/mask pair (request +to change specific feature bits and leave the rest) or only a value (request +to set all features to specified set). + +As request is subject to netdev_change_features() sanity checks, optional +kernel reply (can be suppressed by ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request +header) informs client about the actual result. ``ETHTOOL_A_FEATURES_WANTED`` +reports the difference between client request and actual result: mask consists +of bits which differ between requested features and result (dev->features +after the operation), value consists of values of these bits in the request +(i.e. negated values from resulting features). ``ETHTOOL_A_FEATURES_ACTIVE`` +reports the difference between old and new dev->features: mask consists of +bits which have changed, values are their values in new dev->features (after +the operation). + +``ETHTOOL_MSG_FEATURES_NTF`` notification is sent not only if device features +are modified using ``ETHTOOL_MSG_FEATURES_SET`` request or on of ethtool ioctl +request but also each time features are modified with netdev_update_features() +or netdev_change_features(). + + +PRIVFLAGS_GET +============= + +Gets private flags like ``ETHTOOL_GPFLAGS`` ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested reply header + ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags + ==================================== ====== ========================== + +``ETHTOOL_A_PRIVFLAGS_FLAGS`` is a bitset with values of device private flags. +These flags are defined by driver, their number and names (and also meaning) +are device dependent. For compact bitset format, names can be retrieved as +``ETH_SS_PRIV_FLAGS`` string set. If verbose bitset format is requested, +response uses all private flags supported by the device as mask so that client +gets the full information without having to fetch the string set with names. + + +PRIVFLAGS_SET +============= + +Sets or modifies values of device private flags like ``ETHTOOL_SPFLAGS`` +ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header + ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags + ==================================== ====== ========================== + +``ETHTOOL_A_PRIVFLAGS_FLAGS`` can either set the whole set of private flags or +modify only values of some of them. + + +RINGS_GET +========= + +Gets ring sizes like ``ETHTOOL_GRINGPARAM`` ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_RINGS_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== =========================== + ``ETHTOOL_A_RINGS_HEADER`` nested reply header + ``ETHTOOL_A_RINGS_RX_MAX`` u32 max size of RX ring + ``ETHTOOL_A_RINGS_RX_MINI_MAX`` u32 max size of RX mini ring + ``ETHTOOL_A_RINGS_RX_JUMBO_MAX`` u32 max size of RX jumbo ring + ``ETHTOOL_A_RINGS_TX_MAX`` u32 max size of TX ring + ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring + ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring + ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring + ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring + ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring + ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split + ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE + ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode + ==================================== ====== =========================== + +``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with +page-flipping TCP zero-copy receive (``getsockopt(TCP_ZEROCOPY_RECEIVE)``). +If enabled the device is configured to place frame headers and data into +separate buffers. The device configuration must make it possible to receive +full memory pages of data, for example because MTU is high enough or through +HW-GRO. + +``ETHTOOL_A_RINGS_TX_PUSH`` flag is used to enable descriptor fast +path to send packets. In ordinary path, driver fills descriptors in DRAM and +notifies NIC hardware. In fast path, driver pushes descriptors to the device +through MMIO writes, thus reducing the latency. However, enabling this feature +may increase the CPU cost. Drivers may enforce additional per-packet +eligibility checks (e.g. on packet size). + +RINGS_SET +========= + +Sets ring sizes like ``ETHTOOL_SRINGPARAM`` ioctl request. + +Request contents: + + ==================================== ====== =========================== + ``ETHTOOL_A_RINGS_HEADER`` nested reply header + ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring + ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring + ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring + ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring + ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring + ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE + ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode + ==================================== ====== =========================== + +Kernel checks that requested ring sizes do not exceed limits reported by +driver. Driver may impose additional constraints and may not suspport all +attributes. + + +``ETHTOOL_A_RINGS_CQE_SIZE`` specifies the completion queue event size. +Completion queue events(CQE) are the events posted by NIC to indicate the +completion status of a packet when the packet is sent(like send success or +error) or received(like pointers to packet fragments). The CQE size parameter +enables to modify the CQE size other than default size if NIC supports it. +A bigger CQE can have more receive buffer pointers inturn NIC can transfer +a bigger frame from wire. Based on the NIC hardware, the overall completion +queue size can be adjusted in the driver if CQE size is modified. + +CHANNELS_GET +============ + +Gets channel counts like ``ETHTOOL_GCHANNELS`` ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_CHANNELS_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_CHANNELS_HEADER`` nested reply header + ``ETHTOOL_A_CHANNELS_RX_MAX`` u32 max receive channels + ``ETHTOOL_A_CHANNELS_TX_MAX`` u32 max transmit channels + ``ETHTOOL_A_CHANNELS_OTHER_MAX`` u32 max other channels + ``ETHTOOL_A_CHANNELS_COMBINED_MAX`` u32 max combined channels + ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count + ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count + ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count + ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count + ===================================== ====== ========================== + + +CHANNELS_SET +============ + +Sets channel counts like ``ETHTOOL_SCHANNELS`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_CHANNELS_HEADER`` nested request header + ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count + ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count + ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count + ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count + ===================================== ====== ========================== + +Kernel checks that requested channel counts do not exceed limits reported by +driver. Driver may impose additional constraints and may not suspport all +attributes. + + +COALESCE_GET +============ + +Gets coalescing parameters like ``ETHTOOL_GCOALESCE`` ioctl request. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_COALESCE_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + =========================================== ====== ======================= + ``ETHTOOL_A_COALESCE_HEADER`` nested reply header + ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx + ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ + ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx + ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ + ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update + ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce + ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce + ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate + ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx + ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx + ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate + ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx + ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx + ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval + ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx + ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx + =========================================== ====== ======================= + +Attributes are only included in reply if their value is not zero or the +corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e. +they are declared as supported by driver). + +Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and +``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet +arrival and the various time based delay parameters. By default timers are +expected to limit the max delay between any packet arrival/departure and a +corresponding interrupt. In this mode timer should be started by packet +arrival (sometimes delivery of previous interrupt) and reset when interrupt +is delivered. +Setting the appropriate attribute to 1 will enable ``CQE`` mode, where +each packet event resets the timer. In this mode timer is used to force +the interrupt if queue goes idle, while busy queues depend on the packet +limit to trigger interrupts. + +COALESCE_SET +============ + +Sets coalescing parameters like ``ETHTOOL_SCOALESCE`` ioctl request. + +Request contents: + + =========================================== ====== ======================= + ``ETHTOOL_A_COALESCE_HEADER`` nested request header + ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx + ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ + ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx + ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ + ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update + ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce + ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce + ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate + ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx + ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx + ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate + ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx + ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx + ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx + ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx + ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval + ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx + ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx + =========================================== ====== ======================= + +Request is rejected if it attributes declared as unsupported by driver (i.e. +such that the corresponding bit in ``ethtool_ops::supported_coalesce_params`` +is not set), regardless of their values. Driver may impose additional +constraints on coalescing parameters and their values. + + +PAUSE_GET +========= + +Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PAUSE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PAUSE_HEADER`` nested request header + ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation + ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames + ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames + ``ETHTOOL_A_PAUSE_STATS`` nested pause statistics + ===================================== ====== ========================== + +``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set +in ``ETHTOOL_A_HEADER_FLAGS``. +It will be empty if driver did not report any statistics. Drivers fill in +the statistics in the following structure: + +.. kernel-doc:: include/linux/ethtool.h + :identifiers: ethtool_pause_stats + +Each member has a corresponding attribute defined. + +PAUSE_SET +========= + +Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PAUSE_HEADER`` nested request header + ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation + ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames + ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames + ===================================== ====== ========================== + + +EEE_GET +======= + +Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_EEE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_EEE_HEADER`` nested request header + ``ETHTOOL_A_EEE_MODES_OURS`` bool supported/advertised modes + ``ETHTOOL_A_EEE_MODES_PEER`` bool peer advertised link modes + ``ETHTOOL_A_EEE_ACTIVE`` bool EEE is actively used + ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled + ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled + ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us) + ===================================== ====== ========================== + +In ``ETHTOOL_A_EEE_MODES_OURS``, mask consists of link modes for which EEE is +enabled, value of link modes for which EEE is advertised. Link modes for which +peer advertises EEE are listed in ``ETHTOOL_A_EEE_MODES_PEER`` (no mask). The +netlink interface allows reporting EEE status for all link modes but only +first 32 are provided by the ``ethtool_ops`` callback. + + +EEE_SET +======= + +Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_EEE_HEADER`` nested request header + ``ETHTOOL_A_EEE_MODES_OURS`` bool advertised modes + ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled + ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled + ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us) + ===================================== ====== ========================== + +``ETHTOOL_A_EEE_MODES_OURS`` is used to either list link modes to advertise +EEE for (if there is no mask) or specify changes to the list (if there is +a mask). The netlink interface allows reporting EEE status for all link modes +but only first 32 can be set at the moment as that is what the ``ethtool_ops`` +callback supports. + + +TSINFO_GET +========== + +Gets timestamping information like ``ETHTOOL_GET_TS_INFO`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_TSINFO_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_TSINFO_HEADER`` nested request header + ``ETHTOOL_A_TSINFO_TIMESTAMPING`` bitset SO_TIMESTAMPING flags + ``ETHTOOL_A_TSINFO_TX_TYPES`` bitset supported Tx types + ``ETHTOOL_A_TSINFO_RX_FILTERS`` bitset supported Rx filters + ``ETHTOOL_A_TSINFO_PHC_INDEX`` u32 PTP hw clock index + ===================================== ====== ========================== + +``ETHTOOL_A_TSINFO_PHC_INDEX`` is absent if there is no associated PHC (there +is no special value for this case). The bitset attributes are omitted if they +would be empty (no bit set). + +CABLE_TEST +========== + +Start a cable test. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header + ==================================== ====== ========================== + +Notification contents: + +An Ethernet cable typically contains 1, 2 or 4 pairs. The length of +the pair can only be measured when there is a fault in the pair and +hence a reflection. Information about the fault may not be available, +depending on the specific hardware. Hence the contents of the notify +message are mostly optional. The attributes can be repeated an +arbitrary number of times, in an arbitrary order, for an arbitrary +number of pairs. + +The example shows the notification sent when the test is completed for +a T2 cable, i.e. two pairs. One pair is OK and hence has no length +information. The second pair has a fault and does have length +information. + + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header | + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_CABLE_TEST_STATUS`` | u8 | completed | + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_CABLE_TEST_NTF_NEST`` | nested | all the results | + +-+-------------------------------------------+--------+---------------------+ + | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test result | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code | + +-+-+-----------------------------------------+--------+---------------------+ + | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test results | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code | + +-+-+-----------------------------------------+--------+---------------------+ + | | ``ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`` | nested | cable length | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u32 | length in cm | + +-+-+-----------------------------------------+--------+---------------------+ + +CABLE_TEST TDR +============== + +Start a cable test and report raw TDR data + +Request contents: + + +--------------------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header | + +--------------------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_CABLE_TEST_TDR_CFG`` | nested | test configuration | + +-+------------------------------------------+--------+-----------------------+ + | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | first data distance | + +-+-+----------------------------------------+--------+-----------------------+ + | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | last data distance | + +-+-+----------------------------------------+--------+-----------------------+ + | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step | + +-+-+----------------------------------------+--------+-----------------------+ + | | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`` | u8 | pair to test | + +-+-+----------------------------------------+--------+-----------------------+ + +The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members +of the nest. All distances are expressed in centimeters. The PHY takes +the distances as a guide, and rounds to the nearest distance it +actually supports. If a pair is passed, only that one pair will be +tested. Otherwise all pairs are tested. + +Notification contents: + +Raw TDR data is gathered by sending a pulse down the cable and +recording the amplitude of the reflected pulse for a given distance. + +It can take a number of seconds to collect TDR data, especial if the +full 100 meters is probed at 1 meter intervals. When the test is +started a notification will be sent containing just +ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value +ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED. + +When the test has completed a second notification will be sent +containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value +ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data. + +The message may optionally contain the amplitude of the pulse send +down the cable. This is measured in mV. A reflection should not be +bigger than transmitted pulse. + +Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP +nest containing information about the distance along the cable for the +first reading, the last reading, and the step between each +reading. Distances are measured in centimeters. These should be the +exact values the PHY used. These may be different to what the user +requested, if the native measurement resolution is greater than 1 cm. + +For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is +used to report the amplitude of the reflection for a given pair. + + +---------------------------------------------+--------+----------------------+ + | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header | + +---------------------------------------------+--------+----------------------+ + | ``ETHTOOL_A_CABLE_TEST_TDR_STATUS`` | u8 | completed | + +---------------------------------------------+--------+----------------------+ + | ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST`` | nested | all the results | + +-+-------------------------------------------+--------+----------------------+ + | | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE`` | nested | TX Pulse amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_PULSE_mV`` | s16 | Pulse amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | ``ETHTOOL_A_CABLE_NEST_STEP`` | nested | TDR step info | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | First data distance | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | Last data distance | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step| + +-+-+-----------------------------------------+--------+----------------------+ + | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | + +-+-+-----------------------------------------+--------+----------------------+ + | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | + +-+-+-----------------------------------------+--------+----------------------+ + +TUNNEL_INFO +=========== + +Gets information about the tunnel state NIC is aware of. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_TUNNEL_INFO_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_TUNNEL_INFO_HEADER`` | nested | reply header | + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`` | nested | all UDP port tables | + +-+-------------------------------------------+--------+---------------------+ + | | ``ETHTOOL_A_TUNNEL_UDP_TABLE`` | nested | one UDP port table | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`` | u32 | max size of the | + | | | | | table | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` | bitset | tunnel types which | + | | | | | table can hold | + +-+-+-----------------------------------------+--------+---------------------+ + | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`` | nested | offloaded UDP port | + +-+-+-+---------------------------------------+--------+---------------------+ + | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`` | be16 | UDP port | + +-+-+-+---------------------------------------+--------+---------------------+ + | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`` | u32 | tunnel type | + +-+-+-+---------------------------------------+--------+---------------------+ + +For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that +the table contains static entries, hard-coded by the NIC. + +FEC_GET +======= + +Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_FEC_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_FEC_HEADER`` nested request header + ``ETHTOOL_A_FEC_MODES`` bitset configured modes + ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection + ``ETHTOOL_A_FEC_ACTIVE`` u32 index of active FEC mode + ``ETHTOOL_A_FEC_STATS`` nested FEC statistics + ===================================== ====== ========================== + +``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently +active on the interface. This attribute may not be present if device does +not support FEC. + +``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when +autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will +select the FEC mode automatically based on the parameters of the SFP module. +This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface. +``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode +bits (rather than old ``ETHTOOL_FEC_*`` bits). + +``ETHTOOL_A_FEC_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in +``ETHTOOL_A_HEADER_FLAGS``. +Each attribute carries an array of 64bit statistics. First entry in the array +contains the total number of events on the port, while the following entries +are counters corresponding to lanes/PCS instances. The number of entries in +the array will be: + ++--------------+---------------------------------------------+ +| `0` | device does not support FEC statistics | ++--------------+---------------------------------------------+ +| `1` | device does not support per-lane break down | ++--------------+---------------------------------------------+ +| `1 + #lanes` | device has full support for FEC stats | ++--------------+---------------------------------------------+ + +Drivers fill in the statistics in the following structure: + +.. kernel-doc:: include/linux/ethtool.h + :identifiers: ethtool_fec_stats + +FEC_SET +======= + +Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_FEC_HEADER`` nested request header + ``ETHTOOL_A_FEC_MODES`` bitset configured modes + ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection + ===================================== ====== ========================== + +``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise +FEC mode is selected as part of autonegotiation. + +``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended +to set only one bit, if multiple bits are set driver may choose between them +in an implementation specific way. + +``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP +module parameters. This does not mean autonegotiation. + +MODULE_EEPROM_GET +================= + +Fetch module EEPROM data dump. +This interface is designed to allow dumps of at most 1/2 page at once. This +means only dumps of 128 (or less) bytes are allowed, without crossing half page +boundary located at offset 128. For pages other than 0 only high 128 bytes are +accessible. + +Request contents: + + ======================================= ====== ========================== + ``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header + ``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page + ``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read + ``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number + ``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number + ``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address + ======================================= ====== ========================== + +If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed. + +Kernel response contents: + + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header | + +---------------------------------------------+--------+---------------------+ + | ``ETHTOOL_A_MODULE_EEPROM_DATA`` | binary | array of bytes from | + | | | module EEPROM | + +---------------------------------------------+--------+---------------------+ + +``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of +bytes driver actually read. + +STATS_GET +========= + +Get standard statistics for the interface. Note that this is not +a re-implementation of ``ETHTOOL_GSTATS`` which exposed driver-defined +stats. + +Request contents: + + ======================================= ====== ========================== + ``ETHTOOL_A_STATS_HEADER`` nested request header + ``ETHTOOL_A_STATS_GROUPS`` bitset requested groups of stats + ======================================= ====== ========================== + +Kernel response contents: + + +-----------------------------------+--------+--------------------------------+ + | ``ETHTOOL_A_STATS_HEADER`` | nested | reply header | + +-----------------------------------+--------+--------------------------------+ + | ``ETHTOOL_A_STATS_GRP`` | nested | one or more group of stats | + +-+---------------------------------+--------+--------------------------------+ + | | ``ETHTOOL_A_STATS_GRP_ID`` | u32 | group ID - ``ETHTOOL_STATS_*`` | + +-+---------------------------------+--------+--------------------------------+ + | | ``ETHTOOL_A_STATS_GRP_SS_ID`` | u32 | string set ID for names | + +-+---------------------------------+--------+--------------------------------+ + | | ``ETHTOOL_A_STATS_GRP_STAT`` | nested | nest containing a statistic | + +-+---------------------------------+--------+--------------------------------+ + | | ``ETHTOOL_A_STATS_GRP_HIST_RX`` | nested | histogram statistic (Rx) | + +-+---------------------------------+--------+--------------------------------+ + | | ``ETHTOOL_A_STATS_GRP_HIST_TX`` | nested | histogram statistic (Tx) | + +-+---------------------------------+--------+--------------------------------+ + +Users specify which groups of statistics they are requesting via +the ``ETHTOOL_A_STATS_GROUPS`` bitset. Currently defined values are: + + ====================== ======== =============================================== + ETHTOOL_STATS_ETH_MAC eth-mac Basic IEEE 802.3 MAC statistics (30.3.1.1.*) + ETHTOOL_STATS_ETH_PHY eth-phy Basic IEEE 802.3 PHY statistics (30.3.2.1.*) + ETHTOOL_STATS_ETH_CTRL eth-ctrl Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*) + ETHTOOL_STATS_RMON rmon RMON (RFC 2819) statistics + ====================== ======== =============================================== + +Each group should have a corresponding ``ETHTOOL_A_STATS_GRP`` in the reply. +``ETHTOOL_A_STATS_GRP_ID`` identifies which group's statistics nest contains. +``ETHTOOL_A_STATS_GRP_SS_ID`` identifies the string set ID for the names of +the statistics in the group, if available. + +Statistics are added to the ``ETHTOOL_A_STATS_GRP`` nest under +``ETHTOOL_A_STATS_GRP_STAT``. ``ETHTOOL_A_STATS_GRP_STAT`` should contain +single 8 byte (u64) attribute inside - the type of that attribute is +the statistic ID and the value is the value of the statistic. +Each group has its own interpretation of statistic IDs. +Attribute IDs correspond to strings from the string set identified +by ``ETHTOOL_A_STATS_GRP_SS_ID``. Complex statistics (such as RMON histogram +entries) are also listed inside ``ETHTOOL_A_STATS_GRP`` and do not have +a string defined in the string set. + +RMON "histogram" counters count number of packets within given size range. +Because RFC does not specify the ranges beyond the standard 1518 MTU devices +differ in definition of buckets. For this reason the definition of packet ranges +is left to each driver. + +``ETHTOOL_A_STATS_GRP_HIST_RX`` and ``ETHTOOL_A_STATS_GRP_HIST_TX`` nests +contain the following attributes: + + ================================= ====== =================================== + ETHTOOL_A_STATS_RMON_HIST_BKT_LOW u32 low bound of the packet size bucket + ETHTOOL_A_STATS_RMON_HIST_BKT_HI u32 high bound of the bucket + ETHTOOL_A_STATS_RMON_HIST_VAL u64 packet counter + ================================= ====== =================================== + +Low and high bounds are inclusive, for example: + + ============================= ==== ==== + RFC statistic low high + ============================= ==== ==== + etherStatsPkts64Octets 0 64 + etherStatsPkts512to1023Octets 512 1023 + ============================= ==== ==== + +PHC_VCLOCKS_GET +=============== + +Query device PHC virtual clocks information. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header + ``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number + ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array + ==================================== ====== ========================== + +MODULE_GET +========== + +Gets transceiver module parameters. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_MODULE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ========================== + ``ETHTOOL_A_MODULE_HEADER`` nested reply header + ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy + ``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode + ====================================== ====== ========================== + +The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the +transceiver module power mode policy enforced by the host. The default policy +is driver-dependent, but "auto" is the recommended default and it should be +implemented by new drivers and drivers where conformance to a legacy behavior +is not critical. + +The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational +power mode policy of the transceiver module. It is only reported when a module +is plugged-in. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_module_power_mode + +MODULE_SET +========== + +Sets transceiver module parameters. + +Request contents: + + ====================================== ====== ========================== + ``ETHTOOL_A_MODULE_HEADER`` nested request header + ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy + ====================================== ====== ========================== + +When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used +to set the transceiver module power policy enforced by the host. Possible +values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_module_power_mode_policy + +For SFF-8636 modules, low power mode is forced by the host according to table +6-10 in revision 2.10a of the specification. + +For CMIS modules, low power mode is forced by the host according to table 6-12 +in revision 5.0 of the specification. + +PSE_GET +======= + +Gets PSE attributes. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PSE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested reply header + ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL + PSE functions + ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the + PoDL PSE. + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies +the operational state of the PoDL PSE functions. The operational state of the +PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` +action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2 +aPoDLPSEAdminState. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_podl_pse_admin_state + +When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies +the power detection status of the PoDL PSE. The status depend on internal PSE +state machine and automatic PD classification support. This option is +corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. +Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_podl_pse_pw_d_status + +PSE_SET +======= + +Sets PSE parameters. + +Request contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested request header + ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used +to control PoDL PSE Admin functions. This option is implementing +``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See +``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values. + +Request translation +=================== + +The following table maps ioctl commands to netlink commands providing their +functionality. Entries with "n/a" in right column are commands which do not +have their netlink replacement yet. Entries which "n/a" in the left column +are netlink only. + + =================================== ===================================== + ioctl command netlink command + =================================== ===================================== + ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET`` + ``ETHTOOL_MSG_LINKMODES_GET`` + ``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET`` + ``ETHTOOL_MSG_LINKMODES_SET`` + ``ETHTOOL_GDRVINFO`` n/a + ``ETHTOOL_GREGS`` n/a + ``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET`` + ``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET`` + ``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET`` + ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET`` + ``ETHTOOL_NWAY_RST`` n/a + ``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET`` + ``ETHTOOL_GEEPROM`` n/a + ``ETHTOOL_SEEPROM`` n/a + ``ETHTOOL_GCOALESCE`` ``ETHTOOL_MSG_COALESCE_GET`` + ``ETHTOOL_SCOALESCE`` ``ETHTOOL_MSG_COALESCE_SET`` + ``ETHTOOL_GRINGPARAM`` ``ETHTOOL_MSG_RINGS_GET`` + ``ETHTOOL_SRINGPARAM`` ``ETHTOOL_MSG_RINGS_SET`` + ``ETHTOOL_GPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_GET`` + ``ETHTOOL_SPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_SET`` + ``ETHTOOL_GRXCSUM`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SRXCSUM`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GTXCSUM`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_STXCSUM`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GSG`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SSG`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_TEST`` n/a + ``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET`` + ``ETHTOOL_PHYS_ID`` n/a + ``ETHTOOL_GSTATS`` n/a + ``ETHTOOL_GTSO`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_STSO`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK`` + ``ETHTOOL_GUFO`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SUFO`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GGSO`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SGSO`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GFLAGS`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SFLAGS`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_GET`` + ``ETHTOOL_SPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_SET`` + ``ETHTOOL_GRXFH`` n/a + ``ETHTOOL_SRXFH`` n/a + ``ETHTOOL_GGRO`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SGRO`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GRXRINGS`` n/a + ``ETHTOOL_GRXCLSRLCNT`` n/a + ``ETHTOOL_GRXCLSRULE`` n/a + ``ETHTOOL_GRXCLSRLALL`` n/a + ``ETHTOOL_SRXCLSRLDEL`` n/a + ``ETHTOOL_SRXCLSRLINS`` n/a + ``ETHTOOL_FLASHDEV`` n/a + ``ETHTOOL_RESET`` n/a + ``ETHTOOL_SRXNTUPLE`` n/a + ``ETHTOOL_GRXNTUPLE`` n/a + ``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET`` + ``ETHTOOL_GRXFHINDIR`` n/a + ``ETHTOOL_SRXFHINDIR`` n/a + ``ETHTOOL_GFEATURES`` ``ETHTOOL_MSG_FEATURES_GET`` + ``ETHTOOL_SFEATURES`` ``ETHTOOL_MSG_FEATURES_SET`` + ``ETHTOOL_GCHANNELS`` ``ETHTOOL_MSG_CHANNELS_GET`` + ``ETHTOOL_SCHANNELS`` ``ETHTOOL_MSG_CHANNELS_SET`` + ``ETHTOOL_SET_DUMP`` n/a + ``ETHTOOL_GET_DUMP_FLAG`` n/a + ``ETHTOOL_GET_DUMP_DATA`` n/a + ``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET`` + ``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET`` + ``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET`` + ``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET`` + ``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET`` + ``ETHTOOL_GRSSH`` n/a + ``ETHTOOL_SRSSH`` n/a + ``ETHTOOL_GTUNABLE`` n/a + ``ETHTOOL_STUNABLE`` n/a + ``ETHTOOL_GPHYSTATS`` n/a + ``ETHTOOL_PERQUEUE`` n/a + ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET`` + ``ETHTOOL_MSG_LINKMODES_GET`` + ``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET`` + ``ETHTOOL_MSG_LINKMODES_SET`` + ``ETHTOOL_PHY_GTUNABLE`` n/a + ``ETHTOOL_PHY_STUNABLE`` n/a + ``ETHTOOL_GFECPARAM`` ``ETHTOOL_MSG_FEC_GET`` + ``ETHTOOL_SFECPARAM`` ``ETHTOOL_MSG_FEC_SET`` + n/a ``ETHTOOL_MSG_CABLE_TEST_ACT`` + n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` + n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET`` + n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` + n/a ``ETHTOOL_MSG_MODULE_GET`` + n/a ``ETHTOOL_MSG_MODULE_SET`` + =================================== ===================================== |