diff options
Diffstat (limited to 'arch/arm/boot/dts/sun8i-s3-pinecube.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-s3-pinecube.dts | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts new file mode 100644 index 000000000..20966e954 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2019 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "PineCube IP Camera"; + compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "pine64:ir:led1"; + gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ + }; + + led2 { + label = "pine64:ir:led2"; + gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */ + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_wifi: vcc-wifi { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */ + vin-supply = <®_dcdc3>; + startup-delay-us = <200000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ + post-power-on-delay-ms = <200>; + }; +}; + +&csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_8bit_pins>; + status = "okay"; + + port { + csi1_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pe_pins>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi1_mclk_pin>; + clocks = <&ccu CLK_CSI1_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_ldo3>; + DOVDD-supply = <®_ldo3>; + DVDD-supply = <®_ldo4>; + reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */ + powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi1_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Setup"; + linux,code = <KEY_SETUP>; + channel = <0>; + voltage = <190000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdc3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc_wifi>; + vqmmc-supply = <®_dcdc3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_ldo3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu-ephy"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-dovdd-2v8-csi"; + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +®_ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; |