diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-s3c/mach-at2440evb.c | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c new file mode 100644 index 000000000..743403d87 --- /dev/null +++ b/arch/arm/mach-s3c/mach-at2440evb.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com> +// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk> +// and modifications by SBZ <sbz@spgui.org> and +// Weibing <http://weibing.blogbus.com> +// +// For product information, visit http://www.arm.com/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/gpio/machine.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <linux/dm9000.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <linux/platform_data/fb-s3c2410.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include "regs-gpio.h" +#include "gpio-samsung.h" +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/rawnand.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> +#include <linux/mtd/partitions.h> + +#include "devs.h" +#include "cpu.h" +#include <linux/platform_data/mmc-s3cmci.h> + +#include "s3c24xx.h" + +static struct map_desc at2440evb_iodesc[] __initdata = { + /* Nothing here */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, + }, +}; + +/* NAND Flash on AT2440EVB board */ + +static struct mtd_partition __initdata at2440evb_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_256K, + .offset = 0, + }, + [1] = { + .name = "Kernel", + .size = SZ_2M, + .offset = SZ_256K, + }, + [2] = { + .name = "Root", + .offset = SZ_256K + SZ_2M, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part), + .partitions = at2440evb_default_nand_part, + }, +}; + +static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(at2440evb_nand_sets), + .sets = at2440evb_nand_sets, + .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, +}; + +/* DM9000AEP 10/100 ethernet controller */ + +static struct resource at2440evb_dm9k_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_CS3, 4), + [1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4), + [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHEDGE), +}; + +static struct dm9000_plat_data at2440evb_dm9k_pdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), +}; + +static struct platform_device at2440evb_device_eth = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource), + .resource = at2440evb_dm9k_resource, + .dev = { + .platform_data = &at2440evb_dm9k_pdata, + }, +}; + +static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = { + .set_power = s3c24xx_mci_def_set_power, +}; + +static struct gpiod_lookup_table at2440evb_mci_gpio_table = { + .dev_id = "s3c2410-sdi", + .table = { + /* Card detect S3C2410_GPG(10) */ + GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW), + /* bus pins */ + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), + { }, + }, +}; + + +/* 7" LCD panel */ + +static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = { + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + + .type = S3C2410_LCDCON1_TFT, + + .width = 800, + .height = 480, + + .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */ + .xres = 800, + .yres = 480, + .bpp = 16, + .left_margin = 88, + .right_margin = 40, + .hsync_len = 128, + .upper_margin = 32, + .lower_margin = 11, + .vsync_len = 2, +}; + +static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = { + .displays = &at2440evb_lcd_cfg, + .num_displays = 1, + .default_display = 0, +}; + +static struct platform_device *at2440evb_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &s3c_device_sdi, + &s3c_device_lcd, + &at2440evb_device_eth, +}; + +static void __init at2440evb_map_io(void) +{ + s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); + s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); + s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); +} + +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + s3c24xx_timer_init(); +} + +static void __init at2440evb_init(void) +{ + s3c24xx_fb_set_platdata(&at2440evb_fb_info); + gpiod_add_lookup_table(&at2440evb_mci_gpio_table); + s3c24xx_mci_set_platdata(&at2440evb_mci_pdata); + s3c_nand_set_platdata(&at2440evb_nand_info); + s3c_i2c0_set_platdata(NULL); + + platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); +} + + +MACHINE_START(AT2440EVB, "AT2440EVB") + .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, + .map_io = at2440evb_map_io, + .init_machine = at2440evb_init, + .init_irq = s3c2440_init_irq, + .init_time = at2440evb_init_time, +MACHINE_END |