diff options
Diffstat (limited to 'arch/arm/mach-sa1100/Kconfig')
| -rw-r--r-- | arch/arm/mach-sa1100/Kconfig | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig new file mode 100644 index 000000000..fb9cd1070 --- /dev/null +++ b/arch/arm/mach-sa1100/Kconfig @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_SA1100 + bool "SA11x0 Implementations" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_MOXART || ARCH_GEMINI) + depends on ATAGS + depends on CPU_LITTLE_ENDIAN + depends on MMU + select ARCH_NO_SG_CHAIN + select ARCH_MTD_XIP + select CLKSRC_MMIO + select CLKSRC_PXA + select CPU_FREQ + select CPU_SA1100 + select GPIOLIB + select IRQ_DOMAIN + select ISA + select NEED_MACH_MEMORY_H + help + Support for StrongARM 11x0 based boards. + +if ARCH_SA1100 + +config SA1100_ASSABET + bool "Assabet" + select ARM_SA1110_CPUFREQ + select GPIO_REG + select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 + Microprocessor Development Board (also known as the Assabet). + +config ASSABET_NEPONSET + bool "Include support for Neponset" + depends on SA1100_ASSABET + select SA1111 + help + Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 + Microprocessor Development Board (Assabet) with the SA-1111 + Development Board (Nepon). + +config SA1100_CERF + bool "CerfBoard" + depends on UNUSED_BOARD_FILES + select ARM_SA1110_CPUFREQ + select LEDS_GPIO_REGISTER + help + The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). + More information is available at: + <http://www.intrinsyc.com/products/cerfboard/>. + + Say Y if configuring for an Intrinsyc CerfBoard. + Say N otherwise. + +choice + prompt "Cerf Flash available" + depends on SA1100_CERF + default SA1100_CERF_FLASH_8MB + +config SA1100_CERF_FLASH_8MB + bool "8MB" + +config SA1100_CERF_FLASH_16MB + bool "16MB" + +config SA1100_CERF_FLASH_32MB + bool "32MB" + +endchoice + +config SA1100_COLLIE + bool "Sharp Zaurus SL5500" + # FIXME: select ARM_SA11x0_CPUFREQ + select SHARP_LOCOMO + select SHARP_PARAM + select SHARP_SCOOP + help + Say Y here to support the Sharp Zaurus SL5500 PDAs. + +config SA1100_H3100 + bool "Compaq iPAQ H3100" + depends on UNUSED_BOARD_FILES + select ARM_SA1110_CPUFREQ + select HTC_EGPIO + select MFD_IPAQ_MICRO + help + Say Y here if you intend to run this kernel on the Compaq iPAQ + H3100 handheld computer. + +config SA1100_H3600 + bool "Compaq iPAQ H3600/H3700" + select ARM_SA1110_CPUFREQ + select HTC_EGPIO + select MFD_IPAQ_MICRO + help + Say Y here if you intend to run this kernel on the Compaq iPAQ + H3600 and H3700 handheld computers. + +config SA1100_BADGE4 + bool "HP Labs BadgePAD 4" + depends on UNUSED_BOARD_FILES + select ARM_SA1100_CPUFREQ + select SA1111 + help + Say Y here if you want to build a kernel for the HP Laboratories + BadgePAD 4. + +config SA1100_JORNADA720 + bool "HP Jornada 720" + depends on UNUSED_BOARD_FILES + # FIXME: select ARM_SA11x0_CPUFREQ + select SA1111 + help + Say Y here if you want to build a kernel for the HP Jornada 720 + handheld computer. See + <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> + +config SA1100_JORNADA720_SSP + bool "HP Jornada 720 Extended SSP driver" + depends on SA1100_JORNADA720 + select SA1100_SSP + help + Say Y here if you have a HP Jornada 7xx handheld computer and you + want to access devices connected to the MCU. Those include the + keyboard, touchscreen, backlight and battery. This driver also activates + the generic SSP which it extends. + +config SA1100_HACKKIT + bool "HackKit Core CPU Board" + depends on UNUSED_BOARD_FILES + select ARM_SA1100_CPUFREQ + help + Say Y here to support the HackKit Core CPU Board + <http://hackkit.eletztrick.de>; + +config SA1100_LART + bool "LART" + depends on UNUSED_BOARD_FILES + select ARM_SA1100_CPUFREQ + help + Say Y here if you are using the Linux Advanced Radio Terminal + (also known as the LART). See <http://www.lartmaker.nl/> for + information on the LART. + +config SA1100_NANOENGINE + bool "nanoEngine" + depends on UNUSED_BOARD_FILES + select ARM_SA1110_CPUFREQ + select FORCE_PCI + select PCI_NANOENGINE + help + Say Y here if you are using the Bright Star Engineering nanoEngine. + See <http://www.brightstareng.com/arm/nanoeng.htm> for information + on the BSE nanoEngine. + +config SA1100_PLEB + bool "PLEB" + depends on UNUSED_BOARD_FILES + select ARM_SA1100_CPUFREQ + help + Say Y here if you are using version 1 of the Portable Linux + Embedded Board (also known as PLEB). + See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/> + for more information. + +config SA1100_SHANNON + bool "Shannon" + depends on UNUSED_BOARD_FILES + select ARM_SA1100_CPUFREQ + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + The Shannon (also known as a Tuxscreen, and also as a IS2630) was a + limited edition webphone produced by Philips. The Shannon is a SA1100 + platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, + and a telco interface. + +config SA1100_SIMPAD + bool "Simpad" + depends on UNUSED_BOARD_FILES + select ARM_SA1110_CPUFREQ + help + The SIEMENS webpad SIMpad is based on the StrongARM 1110. There + are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB + FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a + PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same + like CL4 in additional it has a PCMCIA-Slot. For more information + visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. + +config SA1100_SSP + tristate "Generic PIO SSP" + depends on UNUSED_BOARD_FILES + help + Say Y here to enable support for the generic PIO SSP driver. + This isn't for audio support, but for attached sensors and + other devices, eg for BadgePAD 4 sensor support. + +endif |