diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 611 |
1 files changed, 611 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts new file mode 100644 index 000000000..4dee790f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -0,0 +1,611 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8150.dtsi" +#include "pmm8155au_1.dtsi" +#include "pmm8155au_2.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SA8155P ADP"; + compatible = "qcom,sa8155p-adp", "qcom,sa8155p"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_3p3: vreg_3p3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * S4A is always on and not controllable through RPMh. + * So model it as a fixed regulator. + */ + vreg_s4a_1p8: smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vreg_3p3>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; +}; + +&apps_rsc { + pmm8155au-1-rpmh-regulators { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>; + vdd-l6-l9-supply = <&vreg_s6a_0p92>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s5a_2p04: smps5 { + regulator-name = "vreg_s5a_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p92: smps6 { + regulator-name = "vreg_s6a_0p92"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1a_0p752: ldo1 { + regulator-name = "vreg_l1a_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_3p1: + vreg_l2a_3p072: ldo2 { + regulator-name = "vreg_l2a_3p072"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-name = "vreg_l3a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_usb_ss_dp_core_1: + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p96: ldo10 { + regulator-name = "vreg_l10a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-name = "vreg_l11a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_1p8: + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-name = "vreg_l13a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-name = "vreg_l15a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_2p96: ldo17 { + regulator-name = "vreg_l17a_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmm8155au-2-rpmh-regulators { + compatible = "qcom,pmm8155au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>; + vdd-l6-l9-supply = <&vreg_s6c_1p128>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s4c_1p352: smps4 { + regulator-name = "vreg_s4c_1p352"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5c_2p04: smps5 { + regulator-name = "vreg_s5c_2p04"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6c_1p128: smps6 { + regulator-name = "vreg_s6c_1p128"; + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1c_1p304: ldo1 { + regulator-name = "vreg_l1c_1p304"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p808: ldo2 { + regulator-name = "vreg_l2c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p2: ldo5 { + regulator-name = "vreg_l5c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_1p8: ldo7 { + regulator-name = "vreg_l7c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p2: ldo8 { + regulator-name = "vreg_l8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_0p8: ldo11 { + regulator-name = "vreg_l11c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p808: ldo12 { + regulator-name = "vreg_l12c_1p808"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p96: ldo13 { + regulator-name = "vreg_l13c_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15c_1p9: ldo15 { + regulator-name = "vreg_l15c_1p9"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16c_3p008: ldo16 { + regulator-name = "vreg_l16c_3p008"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18c_0p88: ldo18 { + regulator-name = "vreg_l18c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 70000>; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + max-speed = <1000>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Micrel KSZ9031RNZ PHY */ + rgmii_phy: phy@7 { + reg = <0x7>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + device_type = "ethernet-phy"; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8155p/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sa8155p/cdsp.mdt"; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ + vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p96>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l5c_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vreg_l5a_0p88>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + sdc2_on: sdc2_on { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <16>; /* 16 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_off: sdc2_off { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <2>; /* 2 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + usb2phy_ac_en1_default: usb2phy_ac_en1_default { + mux { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + usb2phy_ac_en2_default: usb2phy_ac_en2_default { + mux { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + ethernet_defaults: ethernet-defaults { + mdc { + pins = "gpio7"; + function = "rgmii"; + bias-pull-up; + }; + + mdio { + pins = "gpio59"; + function = "rgmii"; + bias-pull-up; + }; + + rgmii-rx { + pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; + function = "rgmii"; + bias-disable; + drive-strength = <2>; + }; + + rgmii-tx { + pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; + function = "rgmii"; + bias-pull-up; + drive-strength = <16>; + }; + + phy-intr { + pins = "gpio124"; + function = "emac_phy"; + bias-disable; + drive-strength = <8>; + }; + + pps { + pins = "gpio81"; + function = "emac_pps"; + bias-disable; + drive-strength = <8>; + }; + + phy-reset { + pins = "gpio79"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + }; +}; |