diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 750 |
1 files changed, 750 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts new file mode 100644 index 000000000..c169d2870 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -0,0 +1,750 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Samsung Galaxy Book2 + * + * Copyright (c) 2022, Xilin Wu <strongtz@yeah.net> + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include "sdm850.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + */ +/delete-node/ &qseecom_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &mpss_region; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &venus_mem; +/delete-node/ &mba_region; +/delete-node/ &spss_mem; + +/ { + model = "Samsung Galaxy Book2"; + compatible = "samsung,w737", "qcom,sdm845"; + chassis-type = "convertible"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + // Firmware initialized the display at 1280p instead of 1440p + framebuffer0: framebuffer@80400000 { + compatible = "simple-framebuffer"; + reg = <0 0x80400000 0 (1920 * 1280 * 4)>; + width = <1920>; + height = <1280>; + stride = <(1920 * 4)>; + format = "a8r8g8b8"; + }; + }; + + aliases { + hsuart0 = &uart6; + }; + + /* Reserved memory changes */ + reserved-memory { + /* Bootloader display framebuffer region */ + cont_splash_mem: memory@80400000 { + reg = <0x0 0x80400000 0x0 0x960000>; + no-map; + }; + + qseecom_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + slpi_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1200000>; + no-map; + }; + + ipa_fw_mem: memory@8d700000 { + reg = <0 0x8d700000 0 0x100000>; + no-map; + }; + + gpu_mem: memory@8d800000 { + reg = <0 0x8d800000 0 0x5000>; + no-map; + }; + + mpss_region: memory@8e000000 { + reg = <0 0x8e000000 0 0x8000000>; + no-map; + }; + + adsp_mem: memory@96000000 { + reg = <0 0x96000000 0 0x2000000>; + no-map; + }; + + cdsp_mem: memory@98000000 { + reg = <0 0x98000000 0 0x800000>; + no-map; + }; + + venus_mem: memory@98800000 { + reg = <0 0x98800000 0 0x500000>; + no-map; + }; + + mba_region: memory@98d00000 { + reg = <0 0x98d00000 0 0x200000>; + no-map; + }; + + spss_mem: memory@98f00000 { + reg = <0 0x98f00000 0 0x100000>; + no-map; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/samsung/w737/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_1p8: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3108000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + }; + + vreg_l22a_2p85: ldo22 { + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3083000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3112000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + }; + + vreg_lvs1a_1p8: lvs1 { + }; + + vreg_lvs2a_1p8: lvs2 { + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/samsung/w737/qccdsp850.mbn"; + status = "okay"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + /* SN65DSI86 @ 0x2c */ + /* The panel requires dual DSI, which is not supported by the bridge driver */ +}; + +&i2c11 { + status = "okay"; + clock-frequency = <400000>; + + /* HID-I2C Touchscreen @ 0x20 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + post-power-on-delay-ms = <120>; + + interrupt-parent = <&tlmm>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/samsung/w737/ipa_fws.elf"; +}; + +/* No idea why it causes an SError when enabled */ +&llcc { + status = "disabled"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn"; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c12_default { + pinmux { + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,sdm845-sndcard"; + model = "Samsung-W737"; + + audio-routing = + "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL3", "MultiMedia3 Playback", + "MultiMedia2 Capture", "MM_UL2"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 6>, <85 4>; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio119"; + function = "gpio"; + }; + + pinconf { + pins = "gpio119"; + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio124"; + function = "gpio"; + }; + + pinconf { + pins = "gpio124"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + wcd_intr_default: wcd_intr_default { + pins = "gpio54"; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&venus { + status = "okay"; + firmware-name = "qcom/samsung/w737/qcvss850.mbn"; +}; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + reg = <0 4>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; |