diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 279 |
1 files changed, 279 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts new file mode 100644 index 000000000..0e50661c1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 5 II"; + compatible = "sony,pdx206-generic", "qcom,sm8250"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; + +&gpio_keys { + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; + + g-assist-key { + label = "Google Assistant Key"; + linux,code = <KEY_LEFTMETA>; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; +}; + +&pm8009_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "WIDEC_PWR_EN", + "NC"; +}; + +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "OPTION_2", + "NC", + "PM_SLP_CLK_IN", + "OPTION_1", + "G_ASSIST_N", + "NC", + "SP_ARI_PWR_ALARM", + "NC", + "NC"; /* GPIO_10 */ + + g_assist_n: g-assist-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "LCD_ID", + "NC", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; +}; + +&pm8150l_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "PM3003A_EN", + "NC", + "NC", + "NC", + "AUX2_THERM", + "BB_HP_EN", + "FP_LDO_EN", + "PMX_RESET_N", + "NC", /* GPIO_10 */ + "NC", + "PM3003A_MODE"; +}; + +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "FRONTC_PWR_EN", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "NC", + "NC", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; + +&vreg_l2f_1p3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; |