summaryrefslogtreecommitdiffstats
path: root/arch/microblaze/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/microblaze/Kconfig')
-rw-r--r--arch/microblaze/Kconfig225
1 files changed, 225 insertions, 0 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644
index 000000000..4ebb56d6d
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MICROBLAZE
+ def_bool y
+ select ARCH_32BIT_OFF_T
+ select ARCH_NO_SWAP
+ select ARCH_HAS_DMA_PREP_COHERENT
+ select ARCH_HAS_GCOV_PROFILE_ALL
+ select ARCH_HAS_SYNC_DMA_FOR_CPU
+ select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select BUILDTIME_TABLE_SORT
+ select TIMER_OF
+ select CLONE_BACKWARDS3
+ select COMMON_CLK
+ select DMA_DIRECT_REMAP
+ select GENERIC_ATOMIC64
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IDLE_POLL_SETUP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK
+ select HAVE_ARCH_HASH
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_CONTIGUOUS
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACER
+ select HAVE_PCI
+ select IRQ_DOMAIN
+ select XILINX_INTC
+ select MODULES_USE_ELF_RELA
+ select OF
+ select OF_EARLY_FLATTREE
+ select PCI_DOMAINS_GENERIC if PCI
+ select PCI_SYSCALL if PCI
+ select CPU_NO_EFFICIENT_FFS
+ select MMU_GATHER_NO_RANGE
+ select SPARSE_IRQ
+ select ZONE_DMA
+ select TRACE_IRQFLAGS_SUPPORT
+ select GENERIC_IRQ_MULTI_HANDLER
+
+# Endianness selection
+choice
+ prompt "Endianness selection"
+ default CPU_LITTLE_ENDIAN
+ help
+ microblaze architectures can be configured for either little or
+ big endian formats. Be sure to select the appropriate mode.
+
+config CPU_BIG_ENDIAN
+ bool "Big endian"
+
+config CPU_LITTLE_ENDIAN
+ bool "Little endian"
+
+endchoice
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_CSUM
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+source "arch/microblaze/Kconfig.platform"
+
+menu "Processor type and features"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+ def_bool y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Default kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyUL0,115200"
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ depends on CMDLINE_BOOL
+ default n
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+endmenu
+
+menu "Kernel features"
+
+config NR_CPUS
+ int
+ default "1"
+
+config ADVANCED_OPTIONS
+ bool "Prompt for advanced kernel configuration options"
+ help
+ This option will enable prompting for a variety of advanced kernel
+ configuration options. These options can cause the kernel to not
+ work if they are set incorrectly, but can be used to optimize certain
+ aspects of kernel memory management.
+
+ Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+ depends on !ADVANCED_OPTIONS
+
+config HIGHMEM
+ bool "High memory support"
+ select KMAP_LOCAL
+ help
+ The address space of Microblaze processors is only 4 Gigabytes large
+ and it has to accommodate user address space, kernel address
+ space as well as some memory mapped IO. That means that, if you
+ have a large amount of physical memory and/or IO, not all of the
+ memory can be "permanently mapped" by the kernel. The physical
+ memory that is not permanently mapped is called "high memory".
+
+ If unsure, say n.
+
+config LOWMEM_SIZE_BOOL
+ bool "Set maximum low memory"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the maximum amount of memory which
+ will be used as "low memory", that is, memory which the kernel can
+ access directly, without having to set up a kernel virtual mapping.
+ This can be useful in optimizing the layout of kernel virtual
+ memory.
+
+ Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+ hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+ default "0x30000000"
+
+config MANUAL_RESET_VECTOR
+ hex "Microblaze reset vector address setup"
+ default "0x0"
+ help
+ Set this option to have the kernel override the CPU Reset vector.
+ If zero, no change will be made to the MicroBlaze reset vector at
+ address 0x0.
+ If non-zero, a jump instruction to this address, will be written
+ to the reset vector at address 0x0.
+ If you are unsure, set it to default value 0x0.
+
+config KERNEL_START_BOOL
+ bool "Set custom kernel base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the kernel virtual address at which
+ the kernel will map low memory (the kernel image will be linked at
+ this address). This can be useful in optimizing the virtual memory
+ layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config KERNEL_START
+ hex "Virtual address of kernel base" if KERNEL_START_BOOL
+ default "0xc0000000"
+
+config TASK_SIZE_BOOL
+ bool "Set custom user task size"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the amount of virtual address space
+ allocated to user tasks. This can be useful in optimizing the
+ virtual memory layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config TASK_SIZE
+ hex "Size of user task space" if TASK_SIZE_BOOL
+ default "0x80000000"
+
+config MB_MANAGER
+ bool "Support for Microblaze Manager"
+ depends on ADVANCED_OPTIONS
+ help
+ This option enables API for configuring the MicroBlaze manager
+ control register, which is consumed by the break handler to
+ block the break.
+
+ Say N here unless you know what you are doing.
+
+endmenu
+
+menu "Bus Options"
+
+config PCI_XILINX
+ bool "Xilinx PCI host bridge support"
+ depends on PCI
+
+endmenu