diff options
Diffstat (limited to 'arch/mips/alchemy/board-xxs1500.c')
| -rw-r--r-- | arch/mips/alchemy/board-xxs1500.c | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c new file mode 100644 index 000000000..f175bce29 --- /dev/null +++ b/arch/mips/alchemy/board-xxs1500.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BRIEF MODULE DESCRIPTION + * MyCable XXS1500 board support + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/setup.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/gpio-au1000.h> +#include <prom.h> + +const char *get_system_type(void) +{ + return "XXS1500"; +} + +void prom_putchar(char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void xxs1500_reset(char *c) +{ + /* Jump to the reset vector */ + __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); +} + +static void xxs1500_power_off(void) +{ + while (1) + asm volatile ( + " .set mips32 \n" + " wait \n" + " .set mips0 \n"); +} + +void __init board_setup(void) +{ + u32 pin_func; + + pm_power_off = xxs1500_power_off; + _machine_halt = xxs1500_power_off; + _machine_restart = xxs1500_reset; + + alchemy_gpio1_input_enable(); + alchemy_gpio2_enable(); + + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ + pin_func = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PF_UR3; + pin_func |= SYS_PF_UR3; + alchemy_wrsys(pin_func, AU1000_SYS_PINFUNC); + + /* Enable UART */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + /* Enable DTR (MCR bit 0) = USB power up */ + __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); + wmb(); +} + +/******************************************************************************/ + +static struct resource xxs1500_pcmcia_res[] = { + { + .name = "pcmcia-io", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_IO_PHYS_ADDR, + .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-attr", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_ATTR_PHYS_ADDR, + .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-mem", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_MEM_PHYS_ADDR, + .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + }, +}; + +static struct platform_device xxs1500_pcmcia_dev = { + .name = "xxs1500_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), + .resource = xxs1500_pcmcia_res, +}; + +static struct platform_device *xxs1500_devs[] __initdata = { + &xxs1500_pcmcia_dev, +}; + +static int __init xxs1500_dev_init(void) +{ + irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW); + + irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */ + irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); + + return platform_add_devices(xxs1500_devs, + ARRAY_SIZE(xxs1500_devs)); +} +device_initcall(xxs1500_dev_init); |