diff options
Diffstat (limited to 'arch/mips/sgi-ip30/ip30-setup.c')
| -rw-r--r-- | arch/mips/sgi-ip30/ip30-setup.c | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/arch/mips/sgi-ip30/ip30-setup.c b/arch/mips/sgi-ip30/ip30-setup.c new file mode 100644 index 000000000..75a34684e --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-setup.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SGI IP30 miscellaneous setup bits. + * + * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * 2007 Joshua Kinard <kumba@gentoo.org> + * 2009 Johannes Dickgreber <tanzy@gmx.de> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/percpu.h> +#include <linux/memblock.h> + +#include <asm/smp-ops.h> +#include <asm/sgialib.h> +#include <asm/time.h> +#include <asm/sgi/heart.h> + +#include "ip30-common.h" + +/* Structure of accessible HEART registers located in XKPHYS space. */ +struct ip30_heart_regs __iomem *heart_regs = HEART_XKPHYS_BASE; + +/* + * ARCS will report up to the first 1GB of + * memory if queried. Anything beyond that + * is marked as reserved. + */ +#define IP30_MAX_PROM_MEMORY _AC(0x40000000, UL) + +/* + * Memory in the Octane starts at 512MB + */ +#define IP30_MEMORY_BASE _AC(0x20000000, UL) + +/* + * If using ARCS to probe for memory, then + * remaining memory will start at this offset. + */ +#define IP30_REAL_MEMORY_START (IP30_MEMORY_BASE + IP30_MAX_PROM_MEMORY) + +#define MEM_SHIFT(x) ((x) >> 20) + +static void __init ip30_mem_init(void) +{ + unsigned long total_mem; + phys_addr_t addr; + phys_addr_t size; + u32 memcfg; + int i; + + total_mem = 0; + for (i = 0; i < HEART_MEMORY_BANKS; i++) { + memcfg = __raw_readl(&heart_regs->mem_cfg.l[i]); + if (!(memcfg & HEART_MEMCFG_VALID)) + continue; + + addr = memcfg & HEART_MEMCFG_ADDR_MASK; + addr <<= HEART_MEMCFG_UNIT_SHIFT; + addr += IP30_MEMORY_BASE; + size = memcfg & HEART_MEMCFG_SIZE_MASK; + size >>= HEART_MEMCFG_SIZE_SHIFT; + size += 1; + size <<= HEART_MEMCFG_UNIT_SHIFT; + + total_mem += size; + + if (addr >= IP30_REAL_MEMORY_START) + memblock_phys_free(addr, size); + else if ((addr + size) > IP30_REAL_MEMORY_START) + memblock_phys_free(IP30_REAL_MEMORY_START, + size - IP30_MAX_PROM_MEMORY); + } + pr_info("Detected %luMB of physical memory.\n", MEM_SHIFT(total_mem)); +} + +/** + * ip30_cpu_time_init - platform time initialization. + */ +static void __init ip30_cpu_time_init(void) +{ + int cpu = smp_processor_id(); + u64 heart_compare; + unsigned int start, end; + int time_diff; + + heart_compare = (heart_read(&heart_regs->count) + + (HEART_CYCLES_PER_SEC / 10)); + start = read_c0_count(); + while ((heart_read(&heart_regs->count) - heart_compare) & 0x800000) + cpu_relax(); + + end = read_c0_count(); + time_diff = (int)end - (int)start; + mips_hpt_frequency = time_diff * 10; + pr_info("IP30: CPU%d: %d MHz CPU detected.\n", cpu, + (mips_hpt_frequency * 2) / 1000000); +} + +void __init ip30_per_cpu_init(void) +{ + /* Disable all interrupts. */ + clear_c0_status(ST0_IM); + + ip30_cpu_time_init(); +#ifdef CONFIG_SMP + ip30_install_ipi(); +#endif + + enable_percpu_irq(IP30_HEART_L0_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP30_HEART_L1_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP30_HEART_L2_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP30_HEART_ERR_IRQ, IRQ_TYPE_NONE); +} + +/** + * plat_mem_setup - despite the name, misc setup happens here. + */ +void __init plat_mem_setup(void) +{ + ip30_mem_init(); + + /* XXX: Hard lock on /sbin/init if this flag isn't specified. */ + prom_flags |= PROM_FLAG_DONT_FREE_TEMP; + +#ifdef CONFIG_SMP + register_smp_ops(&ip30_smp_ops); +#else + ip30_per_cpu_init(); +#endif + + ioport_resource.start = 0; + ioport_resource.end = ~0UL; + set_io_port_base(IO_BASE); +} |