diff options
Diffstat (limited to 'arch/powerpc/boot/dts/media5200.dts')
-rw-r--r-- | arch/powerpc/boot/dts/media5200.dts | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts new file mode 100644 index 000000000..96524ede1 --- /dev/null +++ b/arch/powerpc/boot/dts/media5200.dts @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Freescale Media5200 board Device Tree Source + * + * Copyright 2009 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * Steven Cavanagh <scavanagh@secretlab.ca> + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "fsl,media5200"; + compatible = "fsl,media5200"; + + aliases { + console = &console; + ethernet0 = ð0; + }; + + chosen { + stdout-path = &console; + }; + + cpus { + PowerPC,5200@0 { + timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot + bus-frequency = <132000000>; // 132 MHz + clock-frequency = <396000000>; // 396 MHz + }; + }; + + memory@0 { + reg = <0x00000000 0x08000000>; // 128MB RAM + }; + + soc5200@f0000000 { + bus-frequency = <132000000>;// 132 MHz + + psc@2000 { // PSC1 + status = "disabled"; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + // PSC6 in uart mode + console: psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + usb@1000 { + reg = <0x1000 0x100>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot + 0xc000 0 0 2 &media5200_fpga 0 3 + 0xc000 0 0 3 &media5200_fpga 0 4 + 0xc000 0 0 4 &media5200_fpga 0 5 + + 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot + 0xc800 0 0 2 &media5200_fpga 0 4 + 0xc800 0 0 3 &media5200_fpga 0 5 + 0xc800 0 0 4 &media5200_fpga 0 2 + + 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI + 0xd000 0 0 2 &media5200_fpga 0 5 + + 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP + >; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, + <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, + <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + interrupt-parent = <&mpc5200_pic>; + }; + + localbus { + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xfe000000 0x02000000 + 2 0 0xf0010000 0x00010000 + 3 0 0xf0020000 0x00010000 >; + flash@0,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <0 0x0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + flash@1,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <1 0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + media5200_fpga: fpga@2,0 { + compatible = "fsl,media5200-fpga"; + interrupt-controller; + #interrupt-cells = <2>; // 0:bank 1:id; no type field + reg = <2 0 0x10000>; + + interrupt-parent = <&mpc5200_pic>; + interrupts = <0 0 3 // IRQ bank 0 + 1 1 3>; // IRQ bank 1 + }; + + uart@3,0 { + compatible = "ti,tl16c752bpt"; + reg = <3 0 0x10000>; + interrupt-parent = <&media5200_fpga>; + interrupts = <0 0 0 1>; // 2 irqs + }; + }; +}; |