diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/kernel/prom.c | 997 |
1 files changed, 997 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c new file mode 100644 index 000000000..8537c354c --- /dev/null +++ b/arch/powerpc/kernel/prom.c @@ -0,0 +1,997 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Procedures for creating, accessing and interpreting the device tree. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/initrd.h> +#include <linux/bitops.h> +#include <linux/export.h> +#include <linux/kexec.h> +#include <linux/irq.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/libfdt.h> +#include <linux/cpu.h> +#include <linux/pgtable.h> +#include <linux/seq_buf.h> + +#include <asm/rtas.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/kdump.h> +#include <asm/smp.h> +#include <asm/mmu.h> +#include <asm/paca.h> +#include <asm/powernv.h> +#include <asm/iommu.h> +#include <asm/btext.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/pci-bridge.h> +#include <asm/kexec.h> +#include <asm/opal.h> +#include <asm/fadump.h> +#include <asm/epapr_hcalls.h> +#include <asm/firmware.h> +#include <asm/dt_cpu_ftrs.h> +#include <asm/drmem.h> +#include <asm/ultravisor.h> +#include <asm/prom.h> + +#include <mm/mmu_decl.h> + +#ifdef DEBUG +#define DBG(fmt...) printk(KERN_ERR fmt) +#else +#define DBG(fmt...) +#endif + +int *chip_id_lookup_table; + +#ifdef CONFIG_PPC64 +int __initdata iommu_is_off; +int __initdata iommu_force_on; +unsigned long tce_alloc_start, tce_alloc_end; +u64 ppc64_rma_size; +#endif +static phys_addr_t first_memblock_size; +static int __initdata boot_cpu_count; + +static int __init early_parse_mem(char *p) +{ + if (!p) + return 1; + + memory_limit = PAGE_ALIGN(memparse(p, &p)); + DBG("memory limit = 0x%llx\n", memory_limit); + + return 0; +} +early_param("mem", early_parse_mem); + +/* + * overlaps_initrd - check for overlap with page aligned extension of + * initrd. + */ +static inline int overlaps_initrd(unsigned long start, unsigned long size) +{ +#ifdef CONFIG_BLK_DEV_INITRD + if (!initrd_start) + return 0; + + return (start + size) > ALIGN_DOWN(initrd_start, PAGE_SIZE) && + start <= ALIGN(initrd_end, PAGE_SIZE); +#else + return 0; +#endif +} + +/** + * move_device_tree - move tree to an unused area, if needed. + * + * The device tree may be allocated beyond our memory limit, or inside the + * crash kernel region for kdump, or within the page aligned range of initrd. + * If so, move it out of the way. + */ +static void __init move_device_tree(void) +{ + unsigned long start, size; + void *p; + + DBG("-> move_device_tree\n"); + + start = __pa(initial_boot_params); + size = fdt_totalsize(initial_boot_params); + + if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) || + !memblock_is_memory(start + size - 1) || + overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) { + p = memblock_alloc_raw(size, PAGE_SIZE); + if (!p) + panic("Failed to allocate %lu bytes to move device tree\n", + size); + memcpy(p, initial_boot_params, size); + initial_boot_params = p; + DBG("Moved device tree to 0x%px\n", p); + } + + DBG("<- move_device_tree\n"); +} + +/* + * ibm,pa/pi-features is a per-cpu property that contains a string of + * attribute descriptors, each of which has a 2 byte header plus up + * to 254 bytes worth of processor attribute bits. First header + * byte specifies the number of bytes following the header. + * Second header byte is an "attribute-specifier" type, of which + * zero is the only currently-defined value. + * Implementation: Pass in the byte and bit offset for the feature + * that we are interested in. The function will return -1 if the + * pa-features property is missing, or a 1/0 to indicate if the feature + * is supported/not supported. Note that the bit numbers are + * big-endian to match the definition in PAPR. + */ +struct ibm_feature { + unsigned long cpu_features; /* CPU_FTR_xxx bit */ + unsigned long mmu_features; /* MMU_FTR_xxx bit */ + unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */ + unsigned char pabyte; /* byte number in ibm,pa/pi-features */ + unsigned char pabit; /* bit number (big-endian) */ + unsigned char invert; /* if 1, pa bit set => clear feature */ +}; + +static struct ibm_feature ibm_pa_features[] __initdata = { + { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU }, + { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU }, + { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL }, + { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE }, + { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE }, +#ifdef CONFIG_PPC_RADIX_MMU + { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX | MMU_FTR_GTSE }, +#endif + { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE, + .cpu_user_ftrs = PPC_FEATURE_TRUE_LE }, + /* + * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n), + * we don't want to turn on TM here, so we use the *_COMP versions + * which are 0 if the kernel doesn't support TM. + */ + { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP, + .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP }, + + { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 }, +}; + +/* + * ibm,pi-features property provides the support of processor specific + * options not described in ibm,pa-features. Right now use byte 0, bit 3 + * which indicates the occurrence of DSI interrupt when the paste operation + * on the suspended NX window. + */ +static struct ibm_feature ibm_pi_features[] __initdata = { + { .pabyte = 0, .pabit = 3, .mmu_features = MMU_FTR_NX_DSI }, +}; + +static void __init scan_features(unsigned long node, const unsigned char *ftrs, + unsigned long tablelen, + struct ibm_feature *fp, + unsigned long ft_size) +{ + unsigned long i, len, bit; + + /* find descriptor with type == 0 */ + for (;;) { + if (tablelen < 3) + return; + len = 2 + ftrs[0]; + if (tablelen < len) + return; /* descriptor 0 not found */ + if (ftrs[1] == 0) + break; + tablelen -= len; + ftrs += len; + } + + /* loop over bits we know about */ + for (i = 0; i < ft_size; ++i, ++fp) { + if (fp->pabyte >= ftrs[0]) + continue; + bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; + if (bit ^ fp->invert) { + cur_cpu_spec->cpu_features |= fp->cpu_features; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2; + cur_cpu_spec->mmu_features |= fp->mmu_features; + } else { + cur_cpu_spec->cpu_features &= ~fp->cpu_features; + cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2; + cur_cpu_spec->mmu_features &= ~fp->mmu_features; + } + } +} + +static void __init check_cpu_features(unsigned long node, char *name, + struct ibm_feature *fp, + unsigned long size) +{ + const unsigned char *pa_ftrs; + int tablelen; + + pa_ftrs = of_get_flat_dt_prop(node, name, &tablelen); + if (pa_ftrs == NULL) + return; + + scan_features(node, pa_ftrs, tablelen, fp, size); +} + +#ifdef CONFIG_PPC_64S_HASH_MMU +static void __init init_mmu_slb_size(unsigned long node) +{ + const __be32 *slb_size_ptr; + + slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? : + of_get_flat_dt_prop(node, "ibm,slb-size", NULL); + + if (slb_size_ptr) + mmu_slb_size = be32_to_cpup(slb_size_ptr); +} +#else +#define init_mmu_slb_size(node) do { } while(0) +#endif + +static struct feature_property { + const char *name; + u32 min_value; + unsigned long cpu_feature; + unsigned long cpu_user_ftr; +} feature_properties[] __initdata = { +#ifdef CONFIG_ALTIVEC + {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, + {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */ + {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX}, +#endif /* CONFIG_VSX */ +#ifdef CONFIG_PPC64 + {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP}, + {"ibm,purr", 1, CPU_FTR_PURR, 0}, + {"ibm,spurr", 1, CPU_FTR_SPURR, 0}, +#endif /* CONFIG_PPC64 */ +}; + +#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU) +static __init void identical_pvr_fixup(unsigned long node) +{ + unsigned int pvr; + const char *model = of_get_flat_dt_prop(node, "model", NULL); + + /* + * Since 440GR(x)/440EP(x) processors have the same pvr, + * we check the node path and set bit 28 in the cur_cpu_spec + * pvr for EP(x) processor version. This bit is always 0 in + * the "real" pvr. Then we call identify_cpu again with + * the new logical pvr to enable FPU support. + */ + if (model && strstr(model, "440EP")) { + pvr = cur_cpu_spec->pvr_value | 0x8; + identify_cpu(0, pvr); + DBG("Using logical pvr %x for %s\n", pvr, model); + } +} +#else +#define identical_pvr_fixup(node) do { } while(0) +#endif + +static void __init check_cpu_feature_properties(unsigned long node) +{ + int i; + struct feature_property *fp = feature_properties; + const __be32 *prop; + + for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) { + prop = of_get_flat_dt_prop(node, fp->name, NULL); + if (prop && be32_to_cpup(prop) >= fp->min_value) { + cur_cpu_spec->cpu_features |= fp->cpu_feature; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr; + } + } +} + +static int __init early_init_dt_scan_cpus(unsigned long node, + const char *uname, int depth, + void *data) +{ + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *prop; + const __be32 *intserv; + int i, nthreads; + int len; + int found = -1; + int found_thread = 0; + + /* We are scanning "cpu" nodes only */ + if (type == NULL || strcmp(type, "cpu") != 0) + return 0; + + /* Get physical cpuid */ + intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + intserv = of_get_flat_dt_prop(node, "reg", &len); + + nthreads = len / sizeof(int); + + /* + * Now see if any of these threads match our boot cpu. + * NOTE: This must match the parsing done in smp_setup_cpu_maps. + */ + for (i = 0; i < nthreads; i++) { + if (be32_to_cpu(intserv[i]) == + fdt_boot_cpuid_phys(initial_boot_params)) { + found = boot_cpu_count; + found_thread = i; + } +#ifdef CONFIG_SMP + /* logical cpu id is always 0 on UP kernels */ + boot_cpu_count++; +#endif + } + + /* Not the boot CPU */ + if (found < 0) + return 0; + + DBG("boot cpu: logical %d physical %d\n", found, + be32_to_cpu(intserv[found_thread])); + boot_cpuid = found; + + if (IS_ENABLED(CONFIG_PPC64)) + boot_cpu_hwid = be32_to_cpu(intserv[found_thread]); + + /* + * PAPR defines "logical" PVR values for cpus that + * meet various levels of the architecture: + * 0x0f000001 Architecture version 2.04 + * 0x0f000002 Architecture version 2.05 + * If the cpu-version property in the cpu node contains + * such a value, we call identify_cpu again with the + * logical PVR value in order to use the cpu feature + * bits appropriate for the architecture level. + * + * A POWER6 partition in "POWER6 architected" mode + * uses the 0x0f000002 PVR value; in POWER5+ mode + * it uses 0x0f000001. + * + * If we're using device tree CPU feature discovery then we don't + * support the cpu-version property, and it's the responsibility of the + * firmware/hypervisor to provide the correct feature set for the + * architecture level via the ibm,powerpc-cpu-features binding. + */ + if (!dt_cpu_ftrs_in_use()) { + prop = of_get_flat_dt_prop(node, "cpu-version", NULL); + if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) { + identify_cpu(0, be32_to_cpup(prop)); + seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(prop)); + } + + check_cpu_feature_properties(node); + check_cpu_features(node, "ibm,pa-features", ibm_pa_features, + ARRAY_SIZE(ibm_pa_features)); + check_cpu_features(node, "ibm,pi-features", ibm_pi_features, + ARRAY_SIZE(ibm_pi_features)); + } + + identical_pvr_fixup(node); + init_mmu_slb_size(node); + +#ifdef CONFIG_PPC64 + if (nthreads == 1) + cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; + else if (!dt_cpu_ftrs_in_use()) + cur_cpu_spec->cpu_features |= CPU_FTR_SMT; +#endif + + return 0; +} + +static int __init early_init_dt_scan_chosen_ppc(unsigned long node, + const char *uname, + int depth, void *data) +{ + const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */ + + /* Use common scan routine to determine if this is the chosen node */ + if (early_init_dt_scan_chosen(data) < 0) + return 0; + +#ifdef CONFIG_PPC64 + /* check if iommu is forced on or off */ + if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) + iommu_is_off = 1; + if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) + iommu_force_on = 1; +#endif + + /* mem=x on the command line is the preferred mechanism */ + lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL); + if (lprop) + memory_limit = *lprop; + +#ifdef CONFIG_PPC64 + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); + if (lprop) + tce_alloc_start = *lprop; + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); + if (lprop) + tce_alloc_end = *lprop; +#endif + +#ifdef CONFIG_KEXEC_CORE + lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL); + if (lprop) + crashk_res.start = *lprop; + + lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL); + if (lprop) + crashk_res.end = crashk_res.start + *lprop - 1; +#endif + + /* break now */ + return 1; +} + +/* + * Compare the range against max mem limit and update + * size if it cross the limit. + */ + +#ifdef CONFIG_SPARSEMEM +static bool __init validate_mem_limit(u64 base, u64 *size) +{ + u64 max_mem = 1UL << (MAX_PHYSMEM_BITS); + + if (base >= max_mem) + return false; + if ((base + *size) > max_mem) + *size = max_mem - base; + return true; +} +#else +static bool __init validate_mem_limit(u64 base, u64 *size) +{ + return true; +} +#endif + +#ifdef CONFIG_PPC_PSERIES +/* + * Interpret the ibm dynamic reconfiguration memory LMBs. + * This contains a list of memory blocks along with NUMA affinity + * information. + */ +static int __init early_init_drmem_lmb(struct drmem_lmb *lmb, + const __be32 **usm, + void *data) +{ + u64 base, size; + int is_kexec_kdump = 0, rngs; + + base = lmb->base_addr; + size = drmem_lmb_size(); + rngs = 1; + + /* + * Skip this block if the reserved bit is set in flags + * or if the block is not assigned to this partition. + */ + if ((lmb->flags & DRCONF_MEM_RESERVED) || + !(lmb->flags & DRCONF_MEM_ASSIGNED)) + return 0; + + if (*usm) + is_kexec_kdump = 1; + + if (is_kexec_kdump) { + /* + * For each memblock in ibm,dynamic-memory, a + * corresponding entry in linux,drconf-usable-memory + * property contains a counter 'p' followed by 'p' + * (base, size) duple. Now read the counter from + * linux,drconf-usable-memory property + */ + rngs = dt_mem_next_cell(dt_root_size_cells, usm); + if (!rngs) /* there are no (base, size) duple */ + return 0; + } + + do { + if (is_kexec_kdump) { + base = dt_mem_next_cell(dt_root_addr_cells, usm); + size = dt_mem_next_cell(dt_root_size_cells, usm); + } + + if (iommu_is_off) { + if (base >= 0x80000000ul) + continue; + if ((base + size) > 0x80000000ul) + size = 0x80000000ul - base; + } + + if (!validate_mem_limit(base, &size)) + continue; + + DBG("Adding: %llx -> %llx\n", base, size); + memblock_add(base, size); + + if (lmb->flags & DRCONF_MEM_HOTREMOVABLE) + memblock_mark_hotplug(base, size); + } while (--rngs); + + return 0; +} +#endif /* CONFIG_PPC_PSERIES */ + +static int __init early_init_dt_scan_memory_ppc(void) +{ +#ifdef CONFIG_PPC_PSERIES + const void *fdt = initial_boot_params; + int node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory"); + + if (node > 0) + walk_drmem_lmbs_early(node, NULL, early_init_drmem_lmb); + +#endif + + return early_init_dt_scan_memory(); +} + +/* + * For a relocatable kernel, we need to get the memstart_addr first, + * then use it to calculate the virtual kernel start address. This has + * to happen at a very early stage (before machine_init). In this case, + * we just want to get the memstart_address and would not like to mess the + * memblock at this stage. So introduce a variable to skip the memblock_add() + * for this reason. + */ +#ifdef CONFIG_RELOCATABLE +static int add_mem_to_memblock = 1; +#else +#define add_mem_to_memblock 1 +#endif + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ +#ifdef CONFIG_PPC64 + if (iommu_is_off) { + if (base >= 0x80000000ul) + return; + if ((base + size) > 0x80000000ul) + size = 0x80000000ul - base; + } +#endif + /* Keep track of the beginning of memory -and- the size of + * the very first block in the device-tree as it represents + * the RMA on ppc64 server + */ + if (base < memstart_addr) { + memstart_addr = base; + first_memblock_size = size; + } + + /* Add the chunk to the MEMBLOCK list */ + if (add_mem_to_memblock) { + if (validate_mem_limit(base, &size)) + memblock_add(base, size); + } +} + +static void __init early_reserve_mem_dt(void) +{ + unsigned long i, dt_root; + int len; + const __be32 *prop; + + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + + dt_root = of_get_flat_dt_root(); + + prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len); + + if (!prop) + return; + + DBG("Found new-style reserved-ranges\n"); + + /* Each reserved range is an (address,size) pair, 2 cells each, + * totalling 4 cells per range. */ + for (i = 0; i < len / (sizeof(*prop) * 4); i++) { + u64 base, size; + + base = of_read_number(prop + (i * 4) + 0, 2); + size = of_read_number(prop + (i * 4) + 2, 2); + + if (size) { + DBG("reserving: %llx -> %llx\n", base, size); + memblock_reserve(base, size); + } + } +} + +static void __init early_reserve_mem(void) +{ + __be64 *reserve_map; + + reserve_map = (__be64 *)(((unsigned long)initial_boot_params) + + fdt_off_mem_rsvmap(initial_boot_params)); + + /* Look for the new "reserved-regions" property in the DT */ + early_reserve_mem_dt(); + +#ifdef CONFIG_BLK_DEV_INITRD + /* Then reserve the initrd, if any */ + if (initrd_start && (initrd_end > initrd_start)) { + memblock_reserve(ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE), + ALIGN(initrd_end, PAGE_SIZE) - + ALIGN_DOWN(initrd_start, PAGE_SIZE)); + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + if (!IS_ENABLED(CONFIG_PPC32)) + return; + + /* + * Handle the case where we might be booting from an old kexec + * image that setup the mem_rsvmap as pairs of 32-bit values + */ + if (be64_to_cpup(reserve_map) > 0xffffffffull) { + u32 base_32, size_32; + __be32 *reserve_map_32 = (__be32 *)reserve_map; + + DBG("Found old 32-bit reserve map\n"); + + while (1) { + base_32 = be32_to_cpup(reserve_map_32++); + size_32 = be32_to_cpup(reserve_map_32++); + if (size_32 == 0) + break; + DBG("reserving: %x -> %x\n", base_32, size_32); + memblock_reserve(base_32, size_32); + } + return; + } +} + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static bool tm_disabled __initdata; + +static int __init parse_ppc_tm(char *str) +{ + bool res; + + if (kstrtobool(str, &res)) + return -EINVAL; + + tm_disabled = !res; + + return 0; +} +early_param("ppc_tm", parse_ppc_tm); + +static void __init tm_init(void) +{ + if (tm_disabled) { + pr_info("Disabling hardware transactional memory (HTM)\n"); + cur_cpu_spec->cpu_user_features2 &= + ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM); + cur_cpu_spec->cpu_features &= ~CPU_FTR_TM; + return; + } + + pnv_tm_init(); +} +#else +static void tm_init(void) { } +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + +static int __init +early_init_dt_scan_model(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *prop; + + if (depth != 0) + return 0; + + prop = of_get_flat_dt_prop(node, "model", NULL); + if (prop) + seq_buf_printf(&ppc_hw_desc, "%s ", prop); + + /* break now */ + return 1; +} + +#ifdef CONFIG_PPC64 +static void __init save_fscr_to_task(void) +{ + /* + * Ensure the init_task (pid 0, aka swapper) uses the value of FSCR we + * have configured via the device tree features or via __init_FSCR(). + * That value will then be propagated to pid 1 (init) and all future + * processes. + */ + if (early_cpu_has_feature(CPU_FTR_ARCH_207S)) + init_task.thread.fscr = mfspr(SPRN_FSCR); +} +#else +static inline void save_fscr_to_task(void) {} +#endif + + +void __init early_init_devtree(void *params) +{ + phys_addr_t limit; + + DBG(" -> early_init_devtree(%px)\n", params); + + /* Too early to BUG_ON(), do it by hand */ + if (!early_init_dt_verify(params)) + panic("BUG: Failed verifying flat device tree, bad version?"); + + of_scan_flat_dt(early_init_dt_scan_model, NULL); + +#ifdef CONFIG_PPC_RTAS + /* Some machines might need RTAS info for debugging, grab it now. */ + of_scan_flat_dt(early_init_dt_scan_rtas, NULL); +#endif + +#ifdef CONFIG_PPC_POWERNV + /* Some machines might need OPAL info for debugging, grab it now. */ + of_scan_flat_dt(early_init_dt_scan_opal, NULL); + + /* Scan tree for ultravisor feature */ + of_scan_flat_dt(early_init_dt_scan_ultravisor, NULL); +#endif + +#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP) + /* scan tree to see if dump is active during last boot */ + of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL); +#endif + + /* Retrieve various informations from the /chosen node of the + * device-tree, including the platform type, initrd location and + * size, TCE reserve, and more ... + */ + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line); + + /* Scan memory nodes and rebuild MEMBLOCKs */ + early_init_dt_scan_root(); + early_init_dt_scan_memory_ppc(); + + /* + * As generic code authors expect to be able to use static keys + * in early_param() handlers, we initialize the static keys just + * before parsing early params (it's fine to call jump_label_init() + * more than once). + */ + jump_label_init(); + parse_early_param(); + + /* make sure we've parsed cmdline for mem= before this */ + if (memory_limit) + first_memblock_size = min_t(u64, first_memblock_size, memory_limit); + setup_initial_memory_limit(memstart_addr, first_memblock_size); + /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */ + memblock_reserve(PHYSICAL_START, __pa(_end) - PHYSICAL_START); + /* If relocatable, reserve first 32k for interrupt vectors etc. */ + if (PHYSICAL_START > MEMORY_START) + memblock_reserve(MEMORY_START, 0x8000); + reserve_kdump_trampoline(); +#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP) + /* + * If we fail to reserve memory for firmware-assisted dump then + * fallback to kexec based kdump. + */ + if (fadump_reserve_mem() == 0) +#endif + reserve_crashkernel(); + early_reserve_mem(); + + /* Ensure that total memory size is page-aligned. */ + limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); + memblock_enforce_memory_limit(limit); + +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_4K_PAGES) + if (!early_radix_enabled()) + memblock_cap_memory_range(0, 1UL << (H_MAX_PHYSMEM_BITS)); +#endif + + memblock_allow_resize(); + memblock_dump_all(); + + DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size()); + + /* We may need to relocate the flat tree, do it now. + * FIXME .. and the initrd too? */ + move_device_tree(); + + DBG("Scanning CPUs ...\n"); + + dt_cpu_ftrs_scan(); + + // We can now add the CPU name & PVR to the hardware description + seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR)); + + /* Retrieve CPU related informations from the flat tree + * (altivec support, boot CPU ID, ...) + */ + of_scan_flat_dt(early_init_dt_scan_cpus, NULL); + if (boot_cpuid < 0) { + printk("Failed to identify boot CPU !\n"); + BUG(); + } + + save_fscr_to_task(); + +#if defined(CONFIG_SMP) && defined(CONFIG_PPC64) + /* We'll later wait for secondaries to check in; there are + * NCPUS-1 non-boot CPUs :-) + */ + spinning_secondaries = boot_cpu_count - 1; +#endif + + mmu_early_init_devtree(); + +#ifdef CONFIG_PPC_POWERNV + /* Scan and build the list of machine check recoverable ranges */ + of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL); +#endif + epapr_paravirt_early_init(); + + /* Now try to figure out if we are running on LPAR and so on */ + pseries_probe_fw_features(); + + /* + * Initialize pkey features and default AMR/IAMR values + */ + pkey_early_init_devtree(); + +#ifdef CONFIG_PPC_PS3 + /* Identify PS3 firmware */ + if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3")) + powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE; +#endif + + tm_init(); + + DBG(" <- early_init_devtree()\n"); +} + +#ifdef CONFIG_RELOCATABLE +/* + * This function run before early_init_devtree, so we have to init + * initial_boot_params. + */ +void __init early_get_first_memblock_info(void *params, phys_addr_t *size) +{ + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + /* + * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid + * mess the memblock. + */ + add_mem_to_memblock = 0; + early_init_dt_scan_root(); + early_init_dt_scan_memory_ppc(); + add_mem_to_memblock = 1; + + if (size) + *size = first_memblock_size; +} +#endif + +/******* + * + * New implementation of the OF "find" APIs, return a refcounted + * object, call of_node_put() when done. The device tree and list + * are protected by a rw_lock. + * + * Note that property management will need some locking as well, + * this isn't dealt with yet. + * + *******/ + +/** + * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device + * @np: device node of the device + * + * This looks for a property "ibm,chip-id" in the node or any + * of its parents and returns its content, or -1 if it cannot + * be found. + */ +int of_get_ibm_chip_id(struct device_node *np) +{ + of_node_get(np); + while (np) { + u32 chip_id; + + /* + * Skiboot may produce memory nodes that contain more than one + * cell in chip-id, we only read the first one here. + */ + if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) { + of_node_put(np); + return chip_id; + } + + np = of_get_next_parent(np); + } + return -1; +} +EXPORT_SYMBOL(of_get_ibm_chip_id); + +/** + * cpu_to_chip_id - Return the cpus chip-id + * @cpu: The logical cpu number. + * + * Return the value of the ibm,chip-id property corresponding to the given + * logical cpu number. If the chip-id can not be found, returns -1. + */ +int cpu_to_chip_id(int cpu) +{ + struct device_node *np; + int ret = -1, idx; + + idx = cpu / threads_per_core; + if (chip_id_lookup_table && chip_id_lookup_table[idx] != -1) + return chip_id_lookup_table[idx]; + + np = of_get_cpu_node(cpu, NULL); + if (np) { + ret = of_get_ibm_chip_id(np); + of_node_put(np); + + if (chip_id_lookup_table) + chip_id_lookup_table[idx] = ret; + } + + return ret; +} +EXPORT_SYMBOL(cpu_to_chip_id); + +bool arch_match_cpu_phys_id(int cpu, u64 phys_id) +{ +#ifdef CONFIG_SMP + /* + * Early firmware scanning must use this rather than + * get_hard_smp_processor_id because we don't have pacas allocated + * until memory topology is discovered. + */ + if (cpu_to_phys_id != NULL) + return (int)phys_id == cpu_to_phys_id[cpu]; +#endif + + return (int)phys_id == get_hard_smp_processor_id(cpu); +} |