diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/bcma/host_pci.c | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c new file mode 100644 index 000000000..960632197 --- /dev/null +++ b/drivers/bcma/host_pci.c @@ -0,0 +1,386 @@ +/* + * Broadcom specific AMBA + * PCI Host + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/slab.h> +#include <linux/bcma/bcma.h> +#include <linux/pci.h> +#include <linux/module.h> + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ + int win2 = core->bus->host_is_pcie2 ? + BCMA_PCIE2_BAR0_WIN2 : BCMA_PCI_BAR0_WIN2; + + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, + core->addr); + pci_write_config_dword(core->bus->host_pci, win2, core->wrap); + core->bus->mapped_core = core; + bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id); +} + +/* Provides access to the requested core. Returns base offset that has to be + * used. It makes use of fixed windows when possible. */ +static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ + switch (core->id.id) { + case BCMA_CORE_CHIPCOMMON: + return 3 * BCMA_CORE_SIZE; + case BCMA_CORE_PCIE: + return 2 * BCMA_CORE_SIZE; + } + + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return 0; +} + +static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +{ + offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ + offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ + offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ + offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ + offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ + offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + +#ifdef CONFIG_BCMA_BLOCKIO +static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + ioread8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + ioread16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + ioread32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} + +static void bcma_host_pci_block_write(struct bcma_device *core, + const void *buffer, size_t count, + u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + iowrite8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + iowrite16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + iowrite32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} +#endif + +static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset, + u32 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +static const struct bcma_host_ops bcma_host_pci_ops = { + .read8 = bcma_host_pci_read8, + .read16 = bcma_host_pci_read16, + .read32 = bcma_host_pci_read32, + .write8 = bcma_host_pci_write8, + .write16 = bcma_host_pci_write16, + .write32 = bcma_host_pci_write32, +#ifdef CONFIG_BCMA_BLOCKIO + .block_read = bcma_host_pci_block_read, + .block_write = bcma_host_pci_block_write, +#endif + .aread32 = bcma_host_pci_aread32, + .awrite32 = bcma_host_pci_awrite32, +}; + +static int bcma_host_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; + u32 val; + + /* Alloc */ + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) + goto out; + + /* Basic PCI configuration */ + err = pci_enable_device(dev); + if (err) + goto err_kfree_bus; + + err = pci_request_regions(dev, "bcma-pci-bridge"); + if (err) + goto err_pci_disable; + pci_set_master(dev); + + /* Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(dev, 0x40, val & 0xffff00ff); + + /* SSB needed additional powering up, do we have any AMBA PCI cards? */ + if (!pci_is_pcie(dev)) { + bcma_err(bus, "PCI card detected, they are not supported.\n"); + err = -ENXIO; + goto err_pci_release_regions; + } + + bus->dev = &dev->dev; + + /* Map MMIO */ + err = -ENOMEM; + bus->mmio = pci_iomap(dev, 0, ~0UL); + if (!bus->mmio) + goto err_pci_release_regions; + + /* Host specific */ + bus->host_pci = dev; + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + + bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; + bus->boardinfo.type = bus->host_pci->subsystem_device; + + /* Initialize struct, detect chip */ + bcma_init_bus(bus); + + /* Scan bus to find out generation of PCIe core */ + err = bcma_bus_scan(bus); + if (err) + goto err_pci_unmap_mmio; + + if (bcma_find_core(bus, BCMA_CORE_PCIE2)) + bus->host_is_pcie2 = true; + + /* Register */ + err = bcma_bus_register(bus); + if (err) + goto err_unregister_cores; + + pci_set_drvdata(dev, bus); + +out: + return err; + +err_unregister_cores: + bcma_unregister_cores(bus); +err_pci_unmap_mmio: + pci_iounmap(dev, bus->mmio); +err_pci_release_regions: + pci_release_regions(dev); +err_pci_disable: + pci_disable_device(dev); +err_kfree_bus: + kfree(bus); + return err; +} + +static void bcma_host_pci_remove(struct pci_dev *dev) +{ + struct bcma_bus *bus = pci_get_drvdata(dev); + + bcma_bus_unregister(bus); + pci_iounmap(dev, bus->mmio); + pci_release_regions(dev); + pci_disable_device(dev); + kfree(bus); +} + +#ifdef CONFIG_PM_SLEEP +static int bcma_host_pci_suspend(struct device *dev) +{ + struct bcma_bus *bus = dev_get_drvdata(dev); + + bus->mapped_core = NULL; + + return bcma_bus_suspend(bus); +} + +static int bcma_host_pci_resume(struct device *dev) +{ + struct bcma_bus *bus = dev_get_drvdata(dev); + + return bcma_bus_resume(bus); +} + +static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, + bcma_host_pci_resume); +#define BCMA_PM_OPS (&bcma_pm_ops) + +#else /* CONFIG_PM_SLEEP */ + +#define BCMA_PM_OPS NULL + +#endif /* CONFIG_PM_SLEEP */ + +static const struct pci_device_id bcma_pci_bridge_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, /* 0xa8d8 */ + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0018) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_FOXCONN, 0xe092) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_HP, 0x804a) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */ + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */ + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); + +static struct pci_driver bcma_pci_bridge_driver = { + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, + .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) +{ + return pci_register_driver(&bcma_pci_bridge_driver); +} + +void __exit bcma_host_pci_exit(void) +{ + pci_unregister_driver(&bcma_pci_bridge_driver); +} + +/************************************************** + * Runtime ops for drivers. + **************************************************/ + +/* See also pcicore_up */ +void bcma_host_pci_up(struct bcma_bus *bus) +{ + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + if (bus->host_is_pcie2) + bcma_core_pcie2_up(&bus->drv_pcie2); + else + bcma_core_pci_up(&bus->drv_pci[0]); +} +EXPORT_SYMBOL_GPL(bcma_host_pci_up); + +/* See also pcicore_down */ +void bcma_host_pci_down(struct bcma_bus *bus) +{ + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + if (!bus->host_is_pcie2) + bcma_core_pci_down(&bus->drv_pci[0]); +} +EXPORT_SYMBOL_GPL(bcma_host_pci_down); + +/* See also si_pci_setup */ +int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core, + bool enable) +{ + struct pci_dev *pdev; + u32 coremask, tmp; + int err = 0; + + if (bus->hosttype != BCMA_HOSTTYPE_PCI) { + /* This bcma device is not on a PCI host-bus. So the IRQs are + * not routed through the PCI core. + * So we must not enable routing through the PCI core. */ + goto out; + } + + pdev = bus->host_pci; + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) + goto out; + + coremask = BIT(core->core_index) << 8; + if (enable) + tmp |= coremask; + else + tmp &= ~coremask; + + err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); + +out: + return err; +} +EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl); |