diff options
Diffstat (limited to 'drivers/block/paride/bpck.c')
-rw-r--r-- | drivers/block/paride/bpck.c | 477 |
1 files changed, 477 insertions, 0 deletions
diff --git a/drivers/block/paride/bpck.c b/drivers/block/paride/bpck.c new file mode 100644 index 000000000..d880a9465 --- /dev/null +++ b/drivers/block/paride/bpck.c @@ -0,0 +1,477 @@ +/* + bpck.c (c) 1996-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + bpck.c is a low-level protocol driver for the MicroSolutions + "backpack" parallel port IDE adapter. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay + 1.02 GRG 1998.08.15 default pi->delay returned to 4 + +*/ + +#define BPCK_VERSION "1.02" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#undef r2 +#undef w2 +#undef PC + +#define PC pi->private +#define r2() (PC=(in_p(2) & 0xff)) +#define w2(byte) {out_p(2,byte); PC = byte;} +#define t2(pat) {PC ^= pat; out_p(2,PC);} +#define e2() {PC &= 0xfe; out_p(2,PC);} +#define o2() {PC |= 1; out_p(2,PC);} + +#define j44(l,h) (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set + cont = 2 - use internal bpck register addressing +*/ + +static int cont_map[3] = { 0x40, 0x48, 0 }; + +static int bpck_read_regr( PIA *pi, int cont, int regr ) + +{ int r, l, h; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: w0(r & 0xf); w0(r); t2(2); t2(4); + l = r1(); + t2(4); + h = r1(); + return j44(l,h); + + case 1: w0(r & 0xf); w0(r); t2(2); + e2(); t2(0x20); + t2(4); h = r0(); + t2(1); t2(0x20); + return h; + + case 2: + case 3: + case 4: w0(r); w2(9); w2(0); w2(0x20); + h = r4(); + w2(0); + return h; + + } + return -1; +} + +static void bpck_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: w0(r); + t2(2); + w0(val); + o2(); t2(4); t2(1); + break; + + case 2: + case 3: + case 4: w0(r); w2(9); w2(0); + w0(val); w2(1); w2(3); w2(0); + break; + + } +} + +/* These macros access the bpck registers in native addressing */ + +#define WR(r,v) bpck_write_regr(pi,2,r,v) +#define RR(r) (bpck_read_regr(pi,2,r)) + +static void bpck_write_block( PIA *pi, char * buf, int count ) + +{ int i; + + switch (pi->mode) { + + case 0: WR(4,0x40); + w0(0x40); t2(2); t2(1); + for (i=0;i<count;i++) { w0(buf[i]); t2(4); } + WR(4,0); + break; + + case 1: WR(4,0x50); + w0(0x40); t2(2); t2(1); + for (i=0;i<count;i++) { w0(buf[i]); t2(4); } + WR(4,0x10); + break; + + case 2: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(1); + for (i=0;i<count;i++) w4(buf[i]); + w2(0); + WR(4,8); + break; + + case 3: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(1); + for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]); + w2(0); + WR(4,8); + break; + + case 4: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(1); + for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]); + w2(0); + WR(4,8); + break; + } +} + +static void bpck_read_block( PIA *pi, char * buf, int count ) + +{ int i, l, h; + + switch (pi->mode) { + + case 0: WR(4,0x40); + w0(0x40); t2(2); + for (i=0;i<count;i++) { + t2(4); l = r1(); + t2(4); h = r1(); + buf[i] = j44(l,h); + } + WR(4,0); + break; + + case 1: WR(4,0x50); + w0(0x40); t2(2); t2(0x20); + for(i=0;i<count;i++) { t2(4); buf[i] = r0(); } + t2(1); t2(0x20); + WR(4,0x10); + break; + + case 2: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(0x20); + for (i=0;i<count;i++) buf[i] = r4(); + w2(0); + WR(4,8); + break; + + case 3: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(0x20); + for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w(); + w2(0); + WR(4,8); + break; + + case 4: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(0x20); + for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l(); + w2(0); + WR(4,8); + break; + + } +} + +static int bpck_probe_unit ( PIA *pi ) + +{ int o1, o0, f7, id; + int t, s; + + id = pi->unit; + s = 0; + w2(4); w2(0xe); r2(); t2(2); + o1 = r1()&0xf8; + o0 = r0(); + w0(255-id); w2(4); w0(id); + t2(8); t2(8); t2(8); + t2(2); t = r1()&0xf8; + f7 = ((id % 8) == 7); + if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; } + if ((t == o1) && ((!f7) || (s == o1))) { + w2(0x4c); w0(o0); + return 0; + } + t2(8); w0(0); t2(2); w2(0x4c); w0(o0); + return 1; +} + +static void bpck_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + w0(0xff-pi->unit); w2(4); w0(pi->unit); + t2(8); t2(8); t2(8); + t2(2); t2(2); + + switch (pi->mode) { + + case 0: t2(8); WR(4,0); + break; + + case 1: t2(8); WR(4,0x10); + break; + + case 2: + case 3: + case 4: w2(0); WR(4,8); + break; + + } + + WR(5,8); + + if (pi->devtype == PI_PCD) { + WR(0x46,0x10); /* fiddle with ESS logic ??? */ + WR(0x4c,0x38); + WR(0x4d,0x88); + WR(0x46,0xa0); + WR(0x41,0); + WR(0x4e,8); + } +} + +static void bpck_disconnect ( PIA *pi ) + +{ w0(0); + if (pi->mode >= 2) { w2(9); w2(0); } else t2(2); + w2(0x4c); w0(pi->saved_r0); +} + +static void bpck_force_spp ( PIA *pi ) + +/* This fakes the EPP protocol to turn off EPP ... */ + +{ pi->saved_r0 = r0(); + w0(0xff-pi->unit); w2(4); w0(pi->unit); + t2(8); t2(8); t2(8); + t2(2); t2(2); + + w2(0); + w0(4); w2(9); w2(0); + w0(0); w2(1); w2(3); w2(0); + w0(0); w2(9); w2(0); + w2(0x4c); w0(pi->saved_r0); +} + +#define TEST_LEN 16 + +static int bpck_test_proto( PIA *pi, char * scratch, int verbose ) + +{ int i, e, l, h, om; + char buf[TEST_LEN]; + + bpck_force_spp(pi); + + switch (pi->mode) { + + case 0: bpck_connect(pi); + WR(0x13,0x7f); + w0(0x13); t2(2); + for(i=0;i<TEST_LEN;i++) { + t2(4); l = r1(); + t2(4); h = r1(); + buf[i] = j44(l,h); + } + bpck_disconnect(pi); + break; + + case 1: bpck_connect(pi); + WR(0x13,0x7f); + w0(0x13); t2(2); t2(0x20); + for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); } + t2(1); t2(0x20); + bpck_disconnect(pi); + break; + + case 2: + case 3: + case 4: om = pi->mode; + pi->mode = 0; + bpck_connect(pi); + WR(7,3); + WR(4,8); + bpck_disconnect(pi); + + pi->mode = om; + bpck_connect(pi); + w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0); + + switch (pi->mode) { + case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4(); + break; + case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w(); + break; + case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l(); + break; + } + + w2(0); + WR(7,0); + bpck_disconnect(pi); + + break; + + } + + if (verbose) { + printk("%s: bpck: 0x%x unit %d mode %d: ", + pi->device,pi->port,pi->unit,pi->mode); + for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]); + printk("\n"); + } + + e = 0; + for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++; + return e; +} + +static void bpck_read_eeprom ( PIA *pi, char * buf ) + +{ int i, j, k, p, v, f, om, od; + + bpck_force_spp(pi); + + om = pi->mode; od = pi->delay; + pi->mode = 0; pi->delay = 6; + + bpck_connect(pi); + + WR(4,0); + for (i=0;i<64;i++) { + WR(6,8); + WR(6,0xc); + p = 0x100; + for (k=0;k<9;k++) { + f = (((i + 0x180) & p) != 0) * 2; + WR(6,f+0xc); + WR(6,f+0xd); + WR(6,f+0xc); + p = (p >> 1); + } + for (j=0;j<2;j++) { + v = 0; + for (k=0;k<8;k++) { + WR(6,0xc); + WR(6,0xd); + WR(6,0xc); + f = RR(0); + v = 2*v + (f == 0x84); + } + buf[2*i+1-j] = v; + } + } + WR(6,8); + WR(6,0); + WR(5,8); + + bpck_disconnect(pi); + + if (om >= 2) { + bpck_connect(pi); + WR(7,3); + WR(4,8); + bpck_disconnect(pi); + } + + pi->mode = om; pi->delay = od; +} + +static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */ + +{ int i, r, m; + + w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i); + m = -1; + if (r == i) m = 2; + if (r == (255-i)) m = 0; + + w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i); + if (r != (255-i)) m = -1; + + if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); } + if (m == 2) { w2(0x26); w2(0xc); } + + if (m == -1) return 0; + return 5; +} + +static void bpck_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = { "4-bit","8-bit","EPP-8", + "EPP-16","EPP-32" }; + +#ifdef DUMP_EEPROM + int i; +#endif + + bpck_read_eeprom(pi,scratch); + +#ifdef DUMP_EEPROM + if (verbose) { + for(i=0;i<128;i++) + if ((scratch[i] < ' ') || (scratch[i] > '~')) + scratch[i] = '.'; + printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch); + printk("%s: %64.64s\n",pi->device,&scratch[64]); + } +#endif + + printk("%s: bpck %s, backpack %8.8s unit %d", + pi->device,BPCK_VERSION,&scratch[110],pi->unit); + printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port, + pi->mode,mode_string[pi->mode],pi->delay); +} + +static struct pi_protocol bpck = { + .owner = THIS_MODULE, + .name = "bpck", + .max_mode = 5, + .epp_first = 2, + .default_delay = 4, + .max_units = 255, + .write_regr = bpck_write_regr, + .read_regr = bpck_read_regr, + .write_block = bpck_write_block, + .read_block = bpck_read_block, + .connect = bpck_connect, + .disconnect = bpck_disconnect, + .test_port = bpck_test_port, + .probe_unit = bpck_probe_unit, + .test_proto = bpck_test_proto, + .log_adapter = bpck_log_adapter, +}; + +static int __init bpck_init(void) +{ + return paride_register(&bpck); +} + +static void __exit bpck_exit(void) +{ + paride_unregister(&bpck); +} + +MODULE_LICENSE("GPL"); +module_init(bpck_init) +module_exit(bpck_exit) |