diff options
Diffstat (limited to 'drivers/bluetooth/bt3c_cs.c')
-rw-r--r-- | drivers/bluetooth/bt3c_cs.c | 749 |
1 files changed, 749 insertions, 0 deletions
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c new file mode 100644 index 000000000..547138339 --- /dev/null +++ b/drivers/bluetooth/bt3c_cs.c @@ -0,0 +1,749 @@ +/* + * + * Driver for the 3Com Bluetooth PCMCIA card + * + * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> + * Jose Orlando Pereira <jop@di.uminho.pt> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + */ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/spinlock.h> +#include <linux/moduleparam.h> + +#include <linux/skbuff.h> +#include <linux/string.h> +#include <linux/serial.h> +#include <linux/serial_reg.h> +#include <linux/bitops.h> +#include <asm/io.h> + +#include <linux/device.h> +#include <linux/firmware.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> +#include <pcmcia/cisreg.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + + + +/* ======================== Module parameters ======================== */ + + +MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); +MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("BT3CPCC.bin"); + + + +/* ======================== Local structures ======================== */ + + +struct bt3c_info { + struct pcmcia_device *p_dev; + + struct hci_dev *hdev; + + spinlock_t lock; /* For serializing operations */ + + struct sk_buff_head txq; + unsigned long tx_state; + + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; +}; + + +static int bt3c_config(struct pcmcia_device *link); +static void bt3c_release(struct pcmcia_device *link); + +static void bt3c_detach(struct pcmcia_device *p_dev); + + +/* Transmit states */ +#define XMIT_SENDING 1 +#define XMIT_WAKEUP 2 +#define XMIT_WAITING 8 + +/* Receiver states */ +#define RECV_WAIT_PACKET_TYPE 0 +#define RECV_WAIT_EVENT_HEADER 1 +#define RECV_WAIT_ACL_HEADER 2 +#define RECV_WAIT_SCO_HEADER 3 +#define RECV_WAIT_DATA 4 + + + +/* ======================== Special I/O functions ======================== */ + + +#define DATA_L 0 +#define DATA_H 1 +#define ADDR_L 2 +#define ADDR_H 3 +#define CONTROL 4 + + +static inline void bt3c_address(unsigned int iobase, unsigned short addr) +{ + outb(addr & 0xff, iobase + ADDR_L); + outb((addr >> 8) & 0xff, iobase + ADDR_H); +} + + +static inline void bt3c_put(unsigned int iobase, unsigned short value) +{ + outb(value & 0xff, iobase + DATA_L); + outb((value >> 8) & 0xff, iobase + DATA_H); +} + + +static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value) +{ + bt3c_address(iobase, addr); + bt3c_put(iobase, value); +} + + +static inline unsigned short bt3c_get(unsigned int iobase) +{ + unsigned short value = inb(iobase + DATA_L); + + value |= inb(iobase + DATA_H) << 8; + + return value; +} + + +static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr) +{ + bt3c_address(iobase, addr); + + return bt3c_get(iobase); +} + + + +/* ======================== Interrupt handling ======================== */ + + +static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) +{ + int actual = 0; + + bt3c_address(iobase, 0x7080); + + /* Fill FIFO with current frame */ + while (actual < len) { + /* Transmit next byte */ + bt3c_put(iobase, buf[actual]); + actual++; + } + + bt3c_io_write(iobase, 0x7005, actual); + + return actual; +} + + +static void bt3c_write_wakeup(struct bt3c_info *info) +{ + if (!info) { + BT_ERR("Unknown device"); + return; + } + + if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) + return; + + do { + unsigned int iobase = info->p_dev->resource[0]->start; + register struct sk_buff *skb; + int len; + + if (!pcmcia_dev_present(info->p_dev)) + break; + + skb = skb_dequeue(&(info->txq)); + if (!skb) { + clear_bit(XMIT_SENDING, &(info->tx_state)); + break; + } + + /* Send frame */ + len = bt3c_write(iobase, 256, skb->data, skb->len); + + if (len != skb->len) + BT_ERR("Very strange"); + + kfree_skb(skb); + + info->hdev->stat.byte_tx += len; + + } while (0); +} + + +static void bt3c_receive(struct bt3c_info *info) +{ + unsigned int iobase; + int size = 0, avail; + + if (!info) { + BT_ERR("Unknown device"); + return; + } + + iobase = info->p_dev->resource[0]->start; + + avail = bt3c_read(iobase, 0x7006); + + bt3c_address(iobase, 0x7480); + while (size < avail) { + size++; + info->hdev->stat.byte_rx++; + + /* Allocate packet */ + if (!info->rx_skb) { + info->rx_state = RECV_WAIT_PACKET_TYPE; + info->rx_count = 0; + info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); + if (!info->rx_skb) { + BT_ERR("Can't allocate mem for new packet"); + return; + } + } + + + if (info->rx_state == RECV_WAIT_PACKET_TYPE) { + + hci_skb_pkt_type(info->rx_skb) = inb(iobase + DATA_L); + inb(iobase + DATA_H); + + switch (hci_skb_pkt_type(info->rx_skb)) { + + case HCI_EVENT_PKT: + info->rx_state = RECV_WAIT_EVENT_HEADER; + info->rx_count = HCI_EVENT_HDR_SIZE; + break; + + case HCI_ACLDATA_PKT: + info->rx_state = RECV_WAIT_ACL_HEADER; + info->rx_count = HCI_ACL_HDR_SIZE; + break; + + case HCI_SCODATA_PKT: + info->rx_state = RECV_WAIT_SCO_HEADER; + info->rx_count = HCI_SCO_HDR_SIZE; + break; + + default: + /* Unknown packet */ + BT_ERR("Unknown HCI packet with type 0x%02x received", + hci_skb_pkt_type(info->rx_skb)); + info->hdev->stat.err_rx++; + + kfree_skb(info->rx_skb); + info->rx_skb = NULL; + break; + + } + + } else { + + __u8 x = inb(iobase + DATA_L); + + skb_put_u8(info->rx_skb, x); + inb(iobase + DATA_H); + info->rx_count--; + + if (info->rx_count == 0) { + + int dlen; + struct hci_event_hdr *eh; + struct hci_acl_hdr *ah; + struct hci_sco_hdr *sh; + + switch (info->rx_state) { + + case RECV_WAIT_EVENT_HEADER: + eh = hci_event_hdr(info->rx_skb); + info->rx_state = RECV_WAIT_DATA; + info->rx_count = eh->plen; + break; + + case RECV_WAIT_ACL_HEADER: + ah = hci_acl_hdr(info->rx_skb); + dlen = __le16_to_cpu(ah->dlen); + info->rx_state = RECV_WAIT_DATA; + info->rx_count = dlen; + break; + + case RECV_WAIT_SCO_HEADER: + sh = hci_sco_hdr(info->rx_skb); + info->rx_state = RECV_WAIT_DATA; + info->rx_count = sh->dlen; + break; + + case RECV_WAIT_DATA: + hci_recv_frame(info->hdev, info->rx_skb); + info->rx_skb = NULL; + break; + + } + + } + + } + + } + + bt3c_io_write(iobase, 0x7006, 0x0000); +} + + +static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) +{ + struct bt3c_info *info = dev_inst; + unsigned int iobase; + int iir; + irqreturn_t r = IRQ_NONE; + + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; + + iobase = info->p_dev->resource[0]->start; + + spin_lock(&(info->lock)); + + iir = inb(iobase + CONTROL); + if (iir & 0x80) { + int stat = bt3c_read(iobase, 0x7001); + + if ((stat & 0xff) == 0x7f) { + BT_ERR("Very strange (stat=0x%04x)", stat); + } else if ((stat & 0xff) != 0xff) { + if (stat & 0x0020) { + int status = bt3c_read(iobase, 0x7002) & 0x10; + bt_dev_info(info->hdev, "Antenna %s", + status ? "out" : "in"); + } + if (stat & 0x0001) + bt3c_receive(info); + if (stat & 0x0002) { + clear_bit(XMIT_SENDING, &(info->tx_state)); + bt3c_write_wakeup(info); + } + + bt3c_io_write(iobase, 0x7001, 0x0000); + + outb(iir, iobase + CONTROL); + } + r = IRQ_HANDLED; + } + + spin_unlock(&(info->lock)); + + return r; +} + + + +/* ======================== HCI interface ======================== */ + + +static int bt3c_hci_flush(struct hci_dev *hdev) +{ + struct bt3c_info *info = hci_get_drvdata(hdev); + + /* Drop TX queue */ + skb_queue_purge(&(info->txq)); + + return 0; +} + + +static int bt3c_hci_open(struct hci_dev *hdev) +{ + return 0; +} + + +static int bt3c_hci_close(struct hci_dev *hdev) +{ + bt3c_hci_flush(hdev); + + return 0; +} + + +static int bt3c_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct bt3c_info *info = hci_get_drvdata(hdev); + unsigned long flags; + + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); + skb_queue_tail(&(info->txq), skb); + + spin_lock_irqsave(&(info->lock), flags); + + bt3c_write_wakeup(info); + + spin_unlock_irqrestore(&(info->lock), flags); + + return 0; +} + + + +/* ======================== Card services HCI interaction ======================== */ + + +static int bt3c_load_firmware(struct bt3c_info *info, + const unsigned char *firmware, + int count) +{ + char *ptr = (char *) firmware; + char b[9]; + unsigned int iobase, tmp, tn; + unsigned long size, addr, fcs; + int i, err = 0; + + iobase = info->p_dev->resource[0]->start; + + /* Reset */ + bt3c_io_write(iobase, 0x8040, 0x0404); + bt3c_io_write(iobase, 0x8040, 0x0400); + + udelay(1); + + bt3c_io_write(iobase, 0x8040, 0x0404); + + udelay(17); + + /* Load */ + while (count) { + if (ptr[0] != 'S') { + BT_ERR("Bad address in firmware"); + err = -EFAULT; + goto error; + } + + memset(b, 0, sizeof(b)); + memcpy(b, ptr + 2, 2); + if (kstrtoul(b, 16, &size) < 0) + return -EINVAL; + + memset(b, 0, sizeof(b)); + memcpy(b, ptr + 4, 8); + if (kstrtoul(b, 16, &addr) < 0) + return -EINVAL; + + memset(b, 0, sizeof(b)); + memcpy(b, ptr + (size * 2) + 2, 2); + if (kstrtoul(b, 16, &fcs) < 0) + return -EINVAL; + + memset(b, 0, sizeof(b)); + for (tmp = 0, i = 0; i < size; i++) { + memcpy(b, ptr + (i * 2) + 2, 2); + if (kstrtouint(b, 16, &tn)) + return -EINVAL; + tmp += tn; + } + + if (((tmp + fcs) & 0xff) != 0xff) { + BT_ERR("Checksum error in firmware"); + err = -EILSEQ; + goto error; + } + + if (ptr[1] == '3') { + bt3c_address(iobase, addr); + + memset(b, 0, sizeof(b)); + for (i = 0; i < (size - 4) / 2; i++) { + memcpy(b, ptr + (i * 4) + 12, 4); + if (kstrtouint(b, 16, &tmp)) + return -EINVAL; + bt3c_put(iobase, tmp); + } + } + + ptr += (size * 2) + 6; + count -= (size * 2) + 6; + } + + udelay(17); + + /* Boot */ + bt3c_address(iobase, 0x3000); + outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL); + +error: + udelay(17); + + /* Clear */ + bt3c_io_write(iobase, 0x7006, 0x0000); + bt3c_io_write(iobase, 0x7005, 0x0000); + bt3c_io_write(iobase, 0x7001, 0x0000); + + return err; +} + + +static int bt3c_open(struct bt3c_info *info) +{ + const struct firmware *firmware; + struct hci_dev *hdev; + int err; + + spin_lock_init(&(info->lock)); + + skb_queue_head_init(&(info->txq)); + + info->rx_state = RECV_WAIT_PACKET_TYPE; + info->rx_count = 0; + info->rx_skb = NULL; + + /* Initialize HCI device */ + hdev = hci_alloc_dev(); + if (!hdev) { + BT_ERR("Can't allocate HCI device"); + return -ENOMEM; + } + + info->hdev = hdev; + + hdev->bus = HCI_PCCARD; + hci_set_drvdata(hdev, info); + SET_HCIDEV_DEV(hdev, &info->p_dev->dev); + + hdev->open = bt3c_hci_open; + hdev->close = bt3c_hci_close; + hdev->flush = bt3c_hci_flush; + hdev->send = bt3c_hci_send_frame; + + /* Load firmware */ + err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev); + if (err < 0) { + BT_ERR("Firmware request failed"); + goto error; + } + + err = bt3c_load_firmware(info, firmware->data, firmware->size); + + release_firmware(firmware); + + if (err < 0) { + BT_ERR("Firmware loading failed"); + goto error; + } + + /* Timeout before it is safe to send the first HCI packet */ + msleep(1000); + + /* Register HCI device */ + err = hci_register_dev(hdev); + if (err < 0) { + BT_ERR("Can't register HCI device"); + goto error; + } + + return 0; + +error: + info->hdev = NULL; + hci_free_dev(hdev); + return err; +} + + +static int bt3c_close(struct bt3c_info *info) +{ + struct hci_dev *hdev = info->hdev; + + if (!hdev) + return -ENODEV; + + bt3c_hci_close(hdev); + + hci_unregister_dev(hdev); + hci_free_dev(hdev); + + return 0; +} + +static int bt3c_probe(struct pcmcia_device *link) +{ + struct bt3c_info *info; + + /* Create new info device */ + info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; + + return bt3c_config(link); +} + + +static void bt3c_detach(struct pcmcia_device *link) +{ + bt3c_release(link); +} + +static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data) +{ + int *try = priv_data; + + if (!try) + p_dev->io_lines = 16; + + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int bt3c_config(struct pcmcia_device *link) +{ + struct bt3c_info *info = link->priv; + int i; + unsigned long try; + + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases + */ + for (try = 0; try < 2; try++) + if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try)) + goto found_port; + + /* Second pass: try to find an entry that isn't picky about + * its base address, then try to grab any standard serial port + * address, and finally try to get any free port. + */ + if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL)) + goto found_port; + + BT_ERR("No usable port range found"); + goto failed; + +found_port: + i = pcmcia_request_irq(link, &bt3c_interrupt); + if (i != 0) + goto failed; + + i = pcmcia_enable_device(link); + if (i != 0) + goto failed; + + if (bt3c_open(info) != 0) + goto failed; + + return 0; + +failed: + bt3c_release(link); + return -ENODEV; +} + + +static void bt3c_release(struct pcmcia_device *link) +{ + struct bt3c_info *info = link->priv; + + bt3c_close(info); + + pcmcia_disable_device(link); +} + + +static const struct pcmcia_device_id bt3c_ids[] = { + PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); + +static struct pcmcia_driver bt3c_driver = { + .owner = THIS_MODULE, + .name = "bt3c_cs", + .probe = bt3c_probe, + .remove = bt3c_detach, + .id_table = bt3c_ids, +}; +module_pcmcia_driver(bt3c_driver); |