diff options
Diffstat (limited to 'drivers/crypto/bcm')
| -rw-r--r-- | drivers/crypto/bcm/Makefile | 14 | ||||
| -rw-r--r-- | drivers/crypto/bcm/cipher.c | 4801 | ||||
| -rw-r--r-- | drivers/crypto/bcm/cipher.h | 472 | ||||
| -rw-r--r-- | drivers/crypto/bcm/spu.c | 1214 | ||||
| -rw-r--r-- | drivers/crypto/bcm/spu.h | 276 | ||||
| -rw-r--r-- | drivers/crypto/bcm/spu2.c | 1384 | ||||
| -rw-r--r-- | drivers/crypto/bcm/spu2.h | 216 | ||||
| -rw-r--r-- | drivers/crypto/bcm/spum.h | 163 | ||||
| -rw-r--r-- | drivers/crypto/bcm/util.c | 530 | ||||
| -rw-r--r-- | drivers/crypto/bcm/util.h | 113 |
10 files changed, 9183 insertions, 0 deletions
diff --git a/drivers/crypto/bcm/Makefile b/drivers/crypto/bcm/Makefile new file mode 100644 index 000000000..8a2110b4e --- /dev/null +++ b/drivers/crypto/bcm/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +# File: drivers/crypto/bcm/Makefile +# +# Makefile for crypto acceleration files for Broadcom SPU driver +# +# Uncomment to enable debug tracing in the SPU driver. +# CFLAGS_util.o := -DDEBUG +# CFLAGS_cipher.o := -DDEBUG +# CFLAGS_spu.o := -DDEBUG +# CFLAGS_spu2.o := -DDEBUG + +obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) := bcm_crypto_spu.o + +bcm_crypto_spu-objs := util.o spu.o spu2.o cipher.o diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c new file mode 100644 index 000000000..c8c799428 --- /dev/null +++ b/drivers/crypto/bcm/cipher.c @@ -0,0 +1,4801 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 Broadcom + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> +#include <linux/crypto.h> +#include <linux/kthread.h> +#include <linux/rtnetlink.h> +#include <linux/sched.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/io.h> +#include <linux/bitops.h> + +#include <crypto/algapi.h> +#include <crypto/aead.h> +#include <crypto/internal/aead.h> +#include <crypto/aes.h> +#include <crypto/internal/des.h> +#include <crypto/hmac.h> +#include <crypto/md5.h> +#include <crypto/authenc.h> +#include <crypto/skcipher.h> +#include <crypto/hash.h> +#include <crypto/sha1.h> +#include <crypto/sha2.h> +#include <crypto/sha3.h> + +#include "util.h" +#include "cipher.h" +#include "spu.h" +#include "spum.h" +#include "spu2.h" + +/* ================= Device Structure ================== */ + +struct bcm_device_private iproc_priv; + +/* ==================== Parameters ===================== */ + +int flow_debug_logging; +module_param(flow_debug_logging, int, 0644); +MODULE_PARM_DESC(flow_debug_logging, "Enable Flow Debug Logging"); + +int packet_debug_logging; +module_param(packet_debug_logging, int, 0644); +MODULE_PARM_DESC(packet_debug_logging, "Enable Packet Debug Logging"); + +int debug_logging_sleep; +module_param(debug_logging_sleep, int, 0644); +MODULE_PARM_DESC(debug_logging_sleep, "Packet Debug Logging Sleep"); + +/* + * The value of these module parameters is used to set the priority for each + * algo type when this driver registers algos with the kernel crypto API. + * To use a priority other than the default, set the priority in the insmod or + * modprobe. Changing the module priority after init time has no effect. + * + * The default priorities are chosen to be lower (less preferred) than ARMv8 CE + * algos, but more preferred than generic software algos. + */ +static int cipher_pri = 150; +module_param(cipher_pri, int, 0644); +MODULE_PARM_DESC(cipher_pri, "Priority for cipher algos"); + +static int hash_pri = 100; +module_param(hash_pri, int, 0644); +MODULE_PARM_DESC(hash_pri, "Priority for hash algos"); + +static int aead_pri = 150; +module_param(aead_pri, int, 0644); +MODULE_PARM_DESC(aead_pri, "Priority for AEAD algos"); + +/* A type 3 BCM header, expected to precede the SPU header for SPU-M. + * Bits 3 and 4 in the first byte encode the channel number (the dma ringset). + * 0x60 - ring 0 + * 0x68 - ring 1 + * 0x70 - ring 2 + * 0x78 - ring 3 + */ +static char BCMHEADER[] = { 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28 }; +/* + * Some SPU hw does not use BCM header on SPU messages. So BCM_HDR_LEN + * is set dynamically after reading SPU type from device tree. + */ +#define BCM_HDR_LEN iproc_priv.bcm_hdr_len + +/* min and max time to sleep before retrying when mbox queue is full. usec */ +#define MBOX_SLEEP_MIN 800 +#define MBOX_SLEEP_MAX 1000 + +/** + * select_channel() - Select a SPU channel to handle a crypto request. Selects + * channel in round robin order. + * + * Return: channel index + */ +static u8 select_channel(void) +{ + u8 chan_idx = atomic_inc_return(&iproc_priv.next_chan); + + return chan_idx % iproc_priv.spu.num_chan; +} + +/** + * spu_skcipher_rx_sg_create() - Build up the scatterlist of buffers used to + * receive a SPU response message for an skcipher request. Includes buffers to + * catch SPU message headers and the response data. + * @mssg: mailbox message containing the receive sg + * @rctx: crypto request context + * @rx_frag_num: number of scatterlist elements required to hold the + * SPU response message + * @chunksize: Number of bytes of response data expected + * @stat_pad_len: Number of bytes required to pad the STAT field to + * a 4-byte boundary + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Returns: + * 0 if successful + * < 0 if an error + */ +static int +spu_skcipher_rx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 rx_frag_num, + unsigned int chunksize, u32 stat_pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of response data expected */ + + mssg->spu.dst = kcalloc(rx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.dst) + return -ENOMEM; + + sg = mssg->spu.dst; + sg_init_table(sg, rx_frag_num); + /* Space for SPU message header */ + sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len); + + /* If XTS tweak in payload, add buffer to receive encrypted tweak */ + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + sg_set_buf(sg++, rctx->msg_buf.c.supdt_tweak, + SPU_XTS_TWEAK_SIZE); + + /* Copy in each dst sg entry from request, up to chunksize */ + datalen = spu_msg_sg_add(&sg, &rctx->dst_sg, &rctx->dst_skip, + rctx->dst_nents, chunksize); + if (datalen < chunksize) { + pr_err("%s(): failed to copy dst sg to mbox msg. chunksize %u, datalen %u", + __func__, chunksize, datalen); + return -EFAULT; + } + + if (stat_pad_len) + sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); + + memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN); + sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len()); + + return 0; +} + +/** + * spu_skcipher_tx_sg_create() - Build up the scatterlist of buffers used to + * send a SPU request message for an skcipher request. Includes SPU message + * headers and the request data. + * @mssg: mailbox message containing the transmit sg + * @rctx: crypto request context + * @tx_frag_num: number of scatterlist elements required to construct the + * SPU request message + * @chunksize: Number of bytes of request data + * @pad_len: Number of pad bytes + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Returns: + * 0 if successful + * < 0 if an error + */ +static int +spu_skcipher_tx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 tx_frag_num, unsigned int chunksize, u32 pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of response data expected */ + u32 stat_len; + + mssg->spu.src = kcalloc(tx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (unlikely(!mssg->spu.src)) + return -ENOMEM; + + sg = mssg->spu.src; + sg_init_table(sg, tx_frag_num); + + sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr, + BCM_HDR_LEN + ctx->spu_req_hdr_len); + + /* if XTS tweak in payload, copy from IV (where crypto API puts it) */ + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + sg_set_buf(sg++, rctx->msg_buf.iv_ctr, SPU_XTS_TWEAK_SIZE); + + /* Copy in each src sg entry from request, up to chunksize */ + datalen = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip, + rctx->src_nents, chunksize); + if (unlikely(datalen < chunksize)) { + pr_err("%s(): failed to copy src sg to mbox msg", + __func__); + return -EFAULT; + } + + if (pad_len) + sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len); + + stat_len = spu->spu_tx_status_len(); + if (stat_len) { + memset(rctx->msg_buf.tx_stat, 0, stat_len); + sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len); + } + return 0; +} + +static int mailbox_send_message(struct brcm_message *mssg, u32 flags, + u8 chan_idx) +{ + int err; + int retry_cnt = 0; + struct device *dev = &(iproc_priv.pdev->dev); + + err = mbox_send_message(iproc_priv.mbox[chan_idx], mssg); + if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) { + while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) { + /* + * Mailbox queue is full. Since MAY_SLEEP is set, assume + * not in atomic context and we can wait and try again. + */ + retry_cnt++; + usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX); + err = mbox_send_message(iproc_priv.mbox[chan_idx], + mssg); + atomic_inc(&iproc_priv.mb_no_spc); + } + } + if (err < 0) { + atomic_inc(&iproc_priv.mb_send_fail); + return err; + } + + /* Check error returned by mailbox controller */ + err = mssg->error; + if (unlikely(err < 0)) { + dev_err(dev, "message error %d", err); + /* Signal txdone for mailbox channel */ + } + + /* Signal txdone for mailbox channel */ + mbox_client_txdone(iproc_priv.mbox[chan_idx], err); + return err; +} + +/** + * handle_skcipher_req() - Submit as much of a block cipher request as fits in + * a single SPU request message, starting at the current position in the request + * data. + * @rctx: Crypto request context + * + * This may be called on the crypto API thread, or, when a request is so large + * it must be broken into multiple SPU messages, on the thread used to invoke + * the response callback. When requests are broken into multiple SPU + * messages, we assume subsequent messages depend on previous results, and + * thus always wait for previous results before submitting the next message. + * Because requests are submitted in lock step like this, there is no need + * to synchronize access to request data structures. + * + * Return: -EINPROGRESS: request has been accepted and result will be returned + * asynchronously + * Any other value indicates an error + */ +static int handle_skcipher_req(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct skcipher_request *req = + container_of(areq, struct skcipher_request, base); + struct iproc_ctx_s *ctx = rctx->ctx; + struct spu_cipher_parms cipher_parms; + int err; + unsigned int chunksize; /* Num bytes of request to submit */ + int remaining; /* Bytes of request still to process */ + int chunk_start; /* Beginning of data for current SPU msg */ + + /* IV or ctr value to use in this SPU msg */ + u8 local_iv_ctr[MAX_IV_SIZE]; + u32 stat_pad_len; /* num bytes to align status field */ + u32 pad_len; /* total length of all padding */ + struct brcm_message *mssg; /* mailbox message */ + + /* number of entries in src and dst sg in mailbox message. */ + u8 rx_frag_num = 2; /* response header and STATUS */ + u8 tx_frag_num = 1; /* request header */ + + flow_log("%s\n", __func__); + + cipher_parms.alg = ctx->cipher.alg; + cipher_parms.mode = ctx->cipher.mode; + cipher_parms.type = ctx->cipher_type; + cipher_parms.key_len = ctx->enckeylen; + cipher_parms.key_buf = ctx->enckey; + cipher_parms.iv_buf = local_iv_ctr; + cipher_parms.iv_len = rctx->iv_ctr_len; + + mssg = &rctx->mb_mssg; + chunk_start = rctx->src_sent; + remaining = rctx->total_todo - chunk_start; + + /* determine the chunk we are breaking off and update the indexes */ + if ((ctx->max_payload != SPU_MAX_PAYLOAD_INF) && + (remaining > ctx->max_payload)) + chunksize = ctx->max_payload; + else + chunksize = remaining; + + rctx->src_sent += chunksize; + rctx->total_sent = rctx->src_sent; + + /* Count number of sg entries to be included in this request */ + rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, chunksize); + rctx->dst_nents = spu_sg_count(rctx->dst_sg, rctx->dst_skip, chunksize); + + if ((ctx->cipher.mode == CIPHER_MODE_CBC) && + rctx->is_encrypt && chunk_start) + /* + * Encrypting non-first first chunk. Copy last block of + * previous result to IV for this chunk. + */ + sg_copy_part_to_buf(req->dst, rctx->msg_buf.iv_ctr, + rctx->iv_ctr_len, + chunk_start - rctx->iv_ctr_len); + + if (rctx->iv_ctr_len) { + /* get our local copy of the iv */ + __builtin_memcpy(local_iv_ctr, rctx->msg_buf.iv_ctr, + rctx->iv_ctr_len); + + /* generate the next IV if possible */ + if ((ctx->cipher.mode == CIPHER_MODE_CBC) && + !rctx->is_encrypt) { + /* + * CBC Decrypt: next IV is the last ciphertext block in + * this chunk + */ + sg_copy_part_to_buf(req->src, rctx->msg_buf.iv_ctr, + rctx->iv_ctr_len, + rctx->src_sent - rctx->iv_ctr_len); + } else if (ctx->cipher.mode == CIPHER_MODE_CTR) { + /* + * The SPU hardware increments the counter once for + * each AES block of 16 bytes. So update the counter + * for the next chunk, if there is one. Note that for + * this chunk, the counter has already been copied to + * local_iv_ctr. We can assume a block size of 16, + * because we only support CTR mode for AES, not for + * any other cipher alg. + */ + add_to_ctr(rctx->msg_buf.iv_ctr, chunksize >> 4); + } + } + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + flow_log("max_payload infinite\n"); + else + flow_log("max_payload %u\n", ctx->max_payload); + + flow_log("sent:%u start:%u remains:%u size:%u\n", + rctx->src_sent, chunk_start, remaining, chunksize); + + /* Copy SPU header template created at setkey time */ + memcpy(rctx->msg_buf.bcm_spu_req_hdr, ctx->bcm_spu_req_hdr, + sizeof(rctx->msg_buf.bcm_spu_req_hdr)); + + spu->spu_cipher_req_finish(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + ctx->spu_req_hdr_len, !(rctx->is_encrypt), + &cipher_parms, chunksize); + + atomic64_add(chunksize, &iproc_priv.bytes_out); + + stat_pad_len = spu->spu_wordalign_padlen(chunksize); + if (stat_pad_len) + rx_frag_num++; + pad_len = stat_pad_len; + if (pad_len) { + tx_frag_num++; + spu->spu_request_pad(rctx->msg_buf.spu_req_pad, 0, + 0, ctx->auth.alg, ctx->auth.mode, + rctx->total_sent, stat_pad_len); + } + + spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + ctx->spu_req_hdr_len); + packet_log("payload:\n"); + dump_sg(rctx->src_sg, rctx->src_skip, chunksize); + packet_dump(" pad: ", rctx->msg_buf.spu_req_pad, pad_len); + + /* + * Build mailbox message containing SPU request msg and rx buffers + * to catch response message + */ + memset(mssg, 0, sizeof(*mssg)); + mssg->type = BRCM_MESSAGE_SPU; + mssg->ctx = rctx; /* Will be returned in response */ + + /* Create rx scatterlist to catch result */ + rx_frag_num += rctx->dst_nents; + + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + rx_frag_num++; /* extra sg to insert tweak */ + + err = spu_skcipher_rx_sg_create(mssg, rctx, rx_frag_num, chunksize, + stat_pad_len); + if (err) + return err; + + /* Create tx scatterlist containing SPU request message */ + tx_frag_num += rctx->src_nents; + if (spu->spu_tx_status_len()) + tx_frag_num++; + + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload()) + tx_frag_num++; /* extra sg to insert tweak */ + + err = spu_skcipher_tx_sg_create(mssg, rctx, tx_frag_num, chunksize, + pad_len); + if (err) + return err; + + err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx); + if (unlikely(err < 0)) + return err; + + return -EINPROGRESS; +} + +/** + * handle_skcipher_resp() - Process a block cipher SPU response. Updates the + * total received count for the request and updates global stats. + * @rctx: Crypto request context + */ +static void handle_skcipher_resp(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct skcipher_request *req = skcipher_request_cast(areq); + struct iproc_ctx_s *ctx = rctx->ctx; + u32 payload_len; + + /* See how much data was returned */ + payload_len = spu->spu_payload_length(rctx->msg_buf.spu_resp_hdr); + + /* + * In XTS mode, the first SPU_XTS_TWEAK_SIZE bytes may be the + * encrypted tweak ("i") value; we don't count those. + */ + if ((ctx->cipher.mode == CIPHER_MODE_XTS) && + spu->spu_xts_tweak_in_payload() && + (payload_len >= SPU_XTS_TWEAK_SIZE)) + payload_len -= SPU_XTS_TWEAK_SIZE; + + atomic64_add(payload_len, &iproc_priv.bytes_in); + + flow_log("%s() offset: %u, bd_len: %u BD:\n", + __func__, rctx->total_received, payload_len); + + dump_sg(req->dst, rctx->total_received, payload_len); + + rctx->total_received += payload_len; + if (rctx->total_received == rctx->total_todo) { + atomic_inc(&iproc_priv.op_counts[SPU_OP_CIPHER]); + atomic_inc( + &iproc_priv.cipher_cnt[ctx->cipher.alg][ctx->cipher.mode]); + } +} + +/** + * spu_ahash_rx_sg_create() - Build up the scatterlist of buffers used to + * receive a SPU response message for an ahash request. + * @mssg: mailbox message containing the receive sg + * @rctx: crypto request context + * @rx_frag_num: number of scatterlist elements required to hold the + * SPU response message + * @digestsize: length of hash digest, in bytes + * @stat_pad_len: Number of bytes required to pad the STAT field to + * a 4-byte boundary + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Return: + * 0 if successful + * < 0 if an error + */ +static int +spu_ahash_rx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 rx_frag_num, unsigned int digestsize, + u32 stat_pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + + mssg->spu.dst = kcalloc(rx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.dst) + return -ENOMEM; + + sg = mssg->spu.dst; + sg_init_table(sg, rx_frag_num); + /* Space for SPU message header */ + sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len); + + /* Space for digest */ + sg_set_buf(sg++, rctx->msg_buf.digest, digestsize); + + if (stat_pad_len) + sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); + + memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN); + sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len()); + return 0; +} + +/** + * spu_ahash_tx_sg_create() - Build up the scatterlist of buffers used to send + * a SPU request message for an ahash request. Includes SPU message headers and + * the request data. + * @mssg: mailbox message containing the transmit sg + * @rctx: crypto request context + * @tx_frag_num: number of scatterlist elements required to construct the + * SPU request message + * @spu_hdr_len: length in bytes of SPU message header + * @hash_carry_len: Number of bytes of data carried over from previous req + * @new_data_len: Number of bytes of new request data + * @pad_len: Number of pad bytes + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Return: + * 0 if successful + * < 0 if an error + */ +static int +spu_ahash_tx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 tx_frag_num, + u32 spu_hdr_len, + unsigned int hash_carry_len, + unsigned int new_data_len, u32 pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + u32 datalen; /* Number of bytes of response data expected */ + u32 stat_len; + + mssg->spu.src = kcalloc(tx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.src) + return -ENOMEM; + + sg = mssg->spu.src; + sg_init_table(sg, tx_frag_num); + + sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr, + BCM_HDR_LEN + spu_hdr_len); + + if (hash_carry_len) + sg_set_buf(sg++, rctx->hash_carry, hash_carry_len); + + if (new_data_len) { + /* Copy in each src sg entry from request, up to chunksize */ + datalen = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip, + rctx->src_nents, new_data_len); + if (datalen < new_data_len) { + pr_err("%s(): failed to copy src sg to mbox msg", + __func__); + return -EFAULT; + } + } + + if (pad_len) + sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len); + + stat_len = spu->spu_tx_status_len(); + if (stat_len) { + memset(rctx->msg_buf.tx_stat, 0, stat_len); + sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len); + } + + return 0; +} + +/** + * handle_ahash_req() - Process an asynchronous hash request from the crypto + * API. + * @rctx: Crypto request context + * + * Builds a SPU request message embedded in a mailbox message and submits the + * mailbox message on a selected mailbox channel. The SPU request message is + * constructed as a scatterlist, including entries from the crypto API's + * src scatterlist to avoid copying the data to be hashed. This function is + * called either on the thread from the crypto API, or, in the case that the + * crypto API request is too large to fit in a single SPU request message, + * on the thread that invokes the receive callback with a response message. + * Because some operations require the response from one chunk before the next + * chunk can be submitted, we always wait for the response for the previous + * chunk before submitting the next chunk. Because requests are submitted in + * lock step like this, there is no need to synchronize access to request data + * structures. + * + * Return: + * -EINPROGRESS: request has been submitted to SPU and response will be + * returned asynchronously + * -EAGAIN: non-final request included a small amount of data, which for + * efficiency we did not submit to the SPU, but instead stored + * to be submitted to the SPU with the next part of the request + * other: an error code + */ +static int handle_ahash_req(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct ahash_request *req = ahash_request_cast(areq); + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req); + struct crypto_tfm *tfm = crypto_ahash_tfm(ahash); + unsigned int blocksize = crypto_tfm_alg_blocksize(tfm); + struct iproc_ctx_s *ctx = rctx->ctx; + + /* number of bytes still to be hashed in this req */ + unsigned int nbytes_to_hash = 0; + int err; + unsigned int chunksize = 0; /* length of hash carry + new data */ + /* + * length of new data, not from hash carry, to be submitted in + * this hw request + */ + unsigned int new_data_len; + + unsigned int __maybe_unused chunk_start = 0; + u32 db_size; /* Length of data field, incl gcm and hash padding */ + int pad_len = 0; /* total pad len, including gcm, hash, stat padding */ + u32 data_pad_len = 0; /* length of GCM/CCM padding */ + u32 stat_pad_len = 0; /* length of padding to align STATUS word */ + struct brcm_message *mssg; /* mailbox message */ + struct spu_request_opts req_opts; + struct spu_cipher_parms cipher_parms; + struct spu_hash_parms hash_parms; + struct spu_aead_parms aead_parms; + unsigned int local_nbuf; + u32 spu_hdr_len; + unsigned int digestsize; + u16 rem = 0; + + /* + * number of entries in src and dst sg. Always includes SPU msg header. + * rx always includes a buffer to catch digest and STATUS. + */ + u8 rx_frag_num = 3; + u8 tx_frag_num = 1; + + flow_log("total_todo %u, total_sent %u\n", + rctx->total_todo, rctx->total_sent); + + memset(&req_opts, 0, sizeof(req_opts)); + memset(&cipher_parms, 0, sizeof(cipher_parms)); + memset(&hash_parms, 0, sizeof(hash_parms)); + memset(&aead_parms, 0, sizeof(aead_parms)); + + req_opts.bd_suppress = true; + hash_parms.alg = ctx->auth.alg; + hash_parms.mode = ctx->auth.mode; + hash_parms.type = HASH_TYPE_NONE; + hash_parms.key_buf = (u8 *)ctx->authkey; + hash_parms.key_len = ctx->authkeylen; + + /* + * For hash algorithms below assignment looks bit odd but + * it's needed for AES-XCBC and AES-CMAC hash algorithms + * to differentiate between 128, 192, 256 bit key values. + * Based on the key values, hash algorithm is selected. + * For example for 128 bit key, hash algorithm is AES-128. + */ + cipher_parms.type = ctx->cipher_type; + + mssg = &rctx->mb_mssg; + chunk_start = rctx->src_sent; + + /* + * Compute the amount remaining to hash. This may include data + * carried over from previous requests. + */ + nbytes_to_hash = rctx->total_todo - rctx->total_sent; + chunksize = nbytes_to_hash; + if ((ctx->max_payload != SPU_MAX_PAYLOAD_INF) && + (chunksize > ctx->max_payload)) + chunksize = ctx->max_payload; + + /* + * If this is not a final request and the request data is not a multiple + * of a full block, then simply park the extra data and prefix it to the + * data for the next request. + */ + if (!rctx->is_final) { + u8 *dest = rctx->hash_carry + rctx->hash_carry_len; + u16 new_len; /* len of data to add to hash carry */ + + rem = chunksize % blocksize; /* remainder */ + if (rem) { + /* chunksize not a multiple of blocksize */ + chunksize -= rem; + if (chunksize == 0) { + /* Don't have a full block to submit to hw */ + new_len = rem - rctx->hash_carry_len; + sg_copy_part_to_buf(req->src, dest, new_len, + rctx->src_sent); + rctx->hash_carry_len = rem; + flow_log("Exiting with hash carry len: %u\n", + rctx->hash_carry_len); + packet_dump(" buf: ", + rctx->hash_carry, + rctx->hash_carry_len); + return -EAGAIN; + } + } + } + + /* if we have hash carry, then prefix it to the data in this request */ + local_nbuf = rctx->hash_carry_len; + rctx->hash_carry_len = 0; + if (local_nbuf) + tx_frag_num++; + new_data_len = chunksize - local_nbuf; + + /* Count number of sg entries to be used in this request */ + rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, + new_data_len); + + /* AES hashing keeps key size in type field, so need to copy it here */ + if (hash_parms.alg == HASH_ALG_AES) + hash_parms.type = (enum hash_type)cipher_parms.type; + else + hash_parms.type = spu->spu_hash_type(rctx->total_sent); + + digestsize = spu->spu_digest_size(ctx->digestsize, ctx->auth.alg, + hash_parms.type); + hash_parms.digestsize = digestsize; + + /* update the indexes */ + rctx->total_sent += chunksize; + /* if you sent a prebuf then that wasn't from this req->src */ + rctx->src_sent += new_data_len; + + if ((rctx->total_sent == rctx->total_todo) && rctx->is_final) + hash_parms.pad_len = spu->spu_hash_pad_len(hash_parms.alg, + hash_parms.mode, + chunksize, + blocksize); + + /* + * If a non-first chunk, then include the digest returned from the + * previous chunk so that hw can add to it (except for AES types). + */ + if ((hash_parms.type == HASH_TYPE_UPDT) && + (hash_parms.alg != HASH_ALG_AES)) { + hash_parms.key_buf = rctx->incr_hash; + hash_parms.key_len = digestsize; + } + + atomic64_add(chunksize, &iproc_priv.bytes_out); + + flow_log("%s() final: %u nbuf: %u ", + __func__, rctx->is_final, local_nbuf); + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + flow_log("max_payload infinite\n"); + else + flow_log("max_payload %u\n", ctx->max_payload); + + flow_log("chunk_start: %u chunk_size: %u\n", chunk_start, chunksize); + + /* Prepend SPU header with type 3 BCM header */ + memcpy(rctx->msg_buf.bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN); + + hash_parms.prebuf_len = local_nbuf; + spu_hdr_len = spu->spu_create_request(rctx->msg_buf.bcm_spu_req_hdr + + BCM_HDR_LEN, + &req_opts, &cipher_parms, + &hash_parms, &aead_parms, + new_data_len); + + if (spu_hdr_len == 0) { + pr_err("Failed to create SPU request header\n"); + return -EFAULT; + } + + /* + * Determine total length of padding required. Put all padding in one + * buffer. + */ + data_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, chunksize); + db_size = spu_real_db_size(0, 0, local_nbuf, new_data_len, + 0, 0, hash_parms.pad_len); + if (spu->spu_tx_status_len()) + stat_pad_len = spu->spu_wordalign_padlen(db_size); + if (stat_pad_len) + rx_frag_num++; + pad_len = hash_parms.pad_len + data_pad_len + stat_pad_len; + if (pad_len) { + tx_frag_num++; + spu->spu_request_pad(rctx->msg_buf.spu_req_pad, data_pad_len, + hash_parms.pad_len, ctx->auth.alg, + ctx->auth.mode, rctx->total_sent, + stat_pad_len); + } + + spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + spu_hdr_len); + packet_dump(" prebuf: ", rctx->hash_carry, local_nbuf); + flow_log("Data:\n"); + dump_sg(rctx->src_sg, rctx->src_skip, new_data_len); + packet_dump(" pad: ", rctx->msg_buf.spu_req_pad, pad_len); + + /* + * Build mailbox message containing SPU request msg and rx buffers + * to catch response message + */ + memset(mssg, 0, sizeof(*mssg)); + mssg->type = BRCM_MESSAGE_SPU; + mssg->ctx = rctx; /* Will be returned in response */ + + /* Create rx scatterlist to catch result */ + err = spu_ahash_rx_sg_create(mssg, rctx, rx_frag_num, digestsize, + stat_pad_len); + if (err) + return err; + + /* Create tx scatterlist containing SPU request message */ + tx_frag_num += rctx->src_nents; + if (spu->spu_tx_status_len()) + tx_frag_num++; + err = spu_ahash_tx_sg_create(mssg, rctx, tx_frag_num, spu_hdr_len, + local_nbuf, new_data_len, pad_len); + if (err) + return err; + + err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx); + if (unlikely(err < 0)) + return err; + + return -EINPROGRESS; +} + +/** + * spu_hmac_outer_hash() - Request synchonous software compute of the outer hash + * for an HMAC request. + * @req: The HMAC request from the crypto API + * @ctx: The session context + * + * Return: 0 if synchronous hash operation successful + * -EINVAL if the hash algo is unrecognized + * any other value indicates an error + */ +static int spu_hmac_outer_hash(struct ahash_request *req, + struct iproc_ctx_s *ctx) +{ + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash)); + int rc; + + switch (ctx->auth.alg) { + case HASH_ALG_MD5: + rc = do_shash("md5", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA1: + rc = do_shash("sha1", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA224: + rc = do_shash("sha224", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA256: + rc = do_shash("sha256", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA384: + rc = do_shash("sha384", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + case HASH_ALG_SHA512: + rc = do_shash("sha512", req->result, ctx->opad, blocksize, + req->result, ctx->digestsize, NULL, 0); + break; + default: + pr_err("%s() Error : unknown hmac type\n", __func__); + rc = -EINVAL; + } + return rc; +} + +/** + * ahash_req_done() - Process a hash result from the SPU hardware. + * @rctx: Crypto request context + * + * Return: 0 if successful + * < 0 if an error + */ +static int ahash_req_done(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct ahash_request *req = ahash_request_cast(areq); + struct iproc_ctx_s *ctx = rctx->ctx; + int err; + + memcpy(req->result, rctx->msg_buf.digest, ctx->digestsize); + + if (spu->spu_type == SPU_TYPE_SPUM) { + /* byte swap the output from the UPDT function to network byte + * order + */ + if (ctx->auth.alg == HASH_ALG_MD5) { + __swab32s((u32 *)req->result); + __swab32s(((u32 *)req->result) + 1); + __swab32s(((u32 *)req->result) + 2); + __swab32s(((u32 *)req->result) + 3); + __swab32s(((u32 *)req->result) + 4); + } + } + + flow_dump(" digest ", req->result, ctx->digestsize); + + /* if this an HMAC then do the outer hash */ + if (rctx->is_sw_hmac) { + err = spu_hmac_outer_hash(req, ctx); + if (err < 0) + return err; + flow_dump(" hmac: ", req->result, ctx->digestsize); + } + + if (rctx->is_sw_hmac || ctx->auth.mode == HASH_MODE_HMAC) { + atomic_inc(&iproc_priv.op_counts[SPU_OP_HMAC]); + atomic_inc(&iproc_priv.hmac_cnt[ctx->auth.alg]); + } else { + atomic_inc(&iproc_priv.op_counts[SPU_OP_HASH]); + atomic_inc(&iproc_priv.hash_cnt[ctx->auth.alg]); + } + + return 0; +} + +/** + * handle_ahash_resp() - Process a SPU response message for a hash request. + * Checks if the entire crypto API request has been processed, and if so, + * invokes post processing on the result. + * @rctx: Crypto request context + */ +static void handle_ahash_resp(struct iproc_reqctx_s *rctx) +{ + struct iproc_ctx_s *ctx = rctx->ctx; + struct crypto_async_request *areq = rctx->parent; + struct ahash_request *req = ahash_request_cast(areq); + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash)); + /* + * Save hash to use as input to next op if incremental. Might be copying + * too much, but that's easier than figuring out actual digest size here + */ + memcpy(rctx->incr_hash, rctx->msg_buf.digest, MAX_DIGEST_SIZE); + + flow_log("%s() blocksize:%u digestsize:%u\n", + __func__, blocksize, ctx->digestsize); + + atomic64_add(ctx->digestsize, &iproc_priv.bytes_in); + + if (rctx->is_final && (rctx->total_sent == rctx->total_todo)) + ahash_req_done(rctx); +} + +/** + * spu_aead_rx_sg_create() - Build up the scatterlist of buffers used to receive + * a SPU response message for an AEAD request. Includes buffers to catch SPU + * message headers and the response data. + * @mssg: mailbox message containing the receive sg + * @req: Crypto API request + * @rctx: crypto request context + * @rx_frag_num: number of scatterlist elements required to hold the + * SPU response message + * @assoc_len: Length of associated data included in the crypto request + * @ret_iv_len: Length of IV returned in response + * @resp_len: Number of bytes of response data expected to be written to + * dst buffer from crypto API + * @digestsize: Length of hash digest, in bytes + * @stat_pad_len: Number of bytes required to pad the STAT field to + * a 4-byte boundary + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Returns: + * 0 if successful + * < 0 if an error + */ +static int spu_aead_rx_sg_create(struct brcm_message *mssg, + struct aead_request *req, + struct iproc_reqctx_s *rctx, + u8 rx_frag_num, + unsigned int assoc_len, + u32 ret_iv_len, unsigned int resp_len, + unsigned int digestsize, u32 stat_pad_len) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of response data expected */ + u32 assoc_buf_len; + u8 data_padlen = 0; + + if (ctx->is_rfc4543) { + /* RFC4543: only pad after data, not after AAD */ + data_padlen = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + assoc_len + resp_len); + assoc_buf_len = assoc_len; + } else { + data_padlen = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + resp_len); + assoc_buf_len = spu->spu_assoc_resp_len(ctx->cipher.mode, + assoc_len, ret_iv_len, + rctx->is_encrypt); + } + + if (ctx->cipher.mode == CIPHER_MODE_CCM) + /* ICV (after data) must be in the next 32-bit word for CCM */ + data_padlen += spu->spu_wordalign_padlen(assoc_buf_len + + resp_len + + data_padlen); + + if (data_padlen) + /* have to catch gcm pad in separate buffer */ + rx_frag_num++; + + mssg->spu.dst = kcalloc(rx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.dst) + return -ENOMEM; + + sg = mssg->spu.dst; + sg_init_table(sg, rx_frag_num); + + /* Space for SPU message header */ + sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len); + + if (assoc_buf_len) { + /* + * Don't write directly to req->dst, because SPU may pad the + * assoc data in the response + */ + memset(rctx->msg_buf.a.resp_aad, 0, assoc_buf_len); + sg_set_buf(sg++, rctx->msg_buf.a.resp_aad, assoc_buf_len); + } + + if (resp_len) { + /* + * Copy in each dst sg entry from request, up to chunksize. + * dst sg catches just the data. digest caught in separate buf. + */ + datalen = spu_msg_sg_add(&sg, &rctx->dst_sg, &rctx->dst_skip, + rctx->dst_nents, resp_len); + if (datalen < (resp_len)) { + pr_err("%s(): failed to copy dst sg to mbox msg. expected len %u, datalen %u", + __func__, resp_len, datalen); + return -EFAULT; + } + } + + /* If GCM/CCM data is padded, catch padding in separate buffer */ + if (data_padlen) { + memset(rctx->msg_buf.a.gcmpad, 0, data_padlen); + sg_set_buf(sg++, rctx->msg_buf.a.gcmpad, data_padlen); + } + + /* Always catch ICV in separate buffer */ + sg_set_buf(sg++, rctx->msg_buf.digest, digestsize); + + flow_log("stat_pad_len %u\n", stat_pad_len); + if (stat_pad_len) { + memset(rctx->msg_buf.rx_stat_pad, 0, stat_pad_len); + sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); + } + + memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN); + sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len()); + + return 0; +} + +/** + * spu_aead_tx_sg_create() - Build up the scatterlist of buffers used to send a + * SPU request message for an AEAD request. Includes SPU message headers and the + * request data. + * @mssg: mailbox message containing the transmit sg + * @rctx: crypto request context + * @tx_frag_num: number of scatterlist elements required to construct the + * SPU request message + * @spu_hdr_len: length of SPU message header in bytes + * @assoc: crypto API associated data scatterlist + * @assoc_len: length of associated data + * @assoc_nents: number of scatterlist entries containing assoc data + * @aead_iv_len: length of AEAD IV, if included + * @chunksize: Number of bytes of request data + * @aad_pad_len: Number of bytes of padding at end of AAD. For GCM/CCM. + * @pad_len: Number of pad bytes + * @incl_icv: If true, write separate ICV buffer after data and + * any padding + * + * The scatterlist that gets allocated here is freed in spu_chunk_cleanup() + * when the request completes, whether the request is handled successfully or + * there is an error. + * + * Return: + * 0 if successful + * < 0 if an error + */ +static int spu_aead_tx_sg_create(struct brcm_message *mssg, + struct iproc_reqctx_s *rctx, + u8 tx_frag_num, + u32 spu_hdr_len, + struct scatterlist *assoc, + unsigned int assoc_len, + int assoc_nents, + unsigned int aead_iv_len, + unsigned int chunksize, + u32 aad_pad_len, u32 pad_len, bool incl_icv) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct scatterlist *sg; /* used to build sgs in mbox message */ + struct scatterlist *assoc_sg = assoc; + struct iproc_ctx_s *ctx = rctx->ctx; + u32 datalen; /* Number of bytes of data to write */ + u32 written; /* Number of bytes of data written */ + u32 assoc_offset = 0; + u32 stat_len; + + mssg->spu.src = kcalloc(tx_frag_num, sizeof(struct scatterlist), + rctx->gfp); + if (!mssg->spu.src) + return -ENOMEM; + + sg = mssg->spu.src; + sg_init_table(sg, tx_frag_num); + + sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr, + BCM_HDR_LEN + spu_hdr_len); + + if (assoc_len) { + /* Copy in each associated data sg entry from request */ + written = spu_msg_sg_add(&sg, &assoc_sg, &assoc_offset, + assoc_nents, assoc_len); + if (written < assoc_len) { + pr_err("%s(): failed to copy assoc sg to mbox msg", + __func__); + return -EFAULT; + } + } + + if (aead_iv_len) + sg_set_buf(sg++, rctx->msg_buf.iv_ctr, aead_iv_len); + + if (aad_pad_len) { + memset(rctx->msg_buf.a.req_aad_pad, 0, aad_pad_len); + sg_set_buf(sg++, rctx->msg_buf.a.req_aad_pad, aad_pad_len); + } + + datalen = chunksize; + if ((chunksize > ctx->digestsize) && incl_icv) + datalen -= ctx->digestsize; + if (datalen) { + /* For aead, a single msg should consume the entire src sg */ + written = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip, + rctx->src_nents, datalen); + if (written < datalen) { + pr_err("%s(): failed to copy src sg to mbox msg", + __func__); + return -EFAULT; + } + } + + if (pad_len) { + memset(rctx->msg_buf.spu_req_pad, 0, pad_len); + sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len); + } + + if (incl_icv) + sg_set_buf(sg++, rctx->msg_buf.digest, ctx->digestsize); + + stat_len = spu->spu_tx_status_len(); + if (stat_len) { + memset(rctx->msg_buf.tx_stat, 0, stat_len); + sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len); + } + return 0; +} + +/** + * handle_aead_req() - Submit a SPU request message for the next chunk of the + * current AEAD request. + * @rctx: Crypto request context + * + * Unlike other operation types, we assume the length of the request fits in + * a single SPU request message. aead_enqueue() makes sure this is true. + * Comments for other op types regarding threads applies here as well. + * + * Unlike incremental hash ops, where the spu returns the entire hash for + * truncated algs like sha-224, the SPU returns just the truncated hash in + * response to aead requests. So digestsize is always ctx->digestsize here. + * + * Return: -EINPROGRESS: crypto request has been accepted and result will be + * returned asynchronously + * Any other value indicates an error + */ +static int handle_aead_req(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct aead_request *req = container_of(areq, + struct aead_request, base); + struct iproc_ctx_s *ctx = rctx->ctx; + int err; + unsigned int chunksize; + unsigned int resp_len; + u32 spu_hdr_len; + u32 db_size; + u32 stat_pad_len; + u32 pad_len; + struct brcm_message *mssg; /* mailbox message */ + struct spu_request_opts req_opts; + struct spu_cipher_parms cipher_parms; + struct spu_hash_parms hash_parms; + struct spu_aead_parms aead_parms; + int assoc_nents = 0; + bool incl_icv = false; + unsigned int digestsize = ctx->digestsize; + + /* number of entries in src and dst sg. Always includes SPU msg header. + */ + u8 rx_frag_num = 2; /* and STATUS */ + u8 tx_frag_num = 1; + + /* doing the whole thing at once */ + chunksize = rctx->total_todo; + + flow_log("%s: chunksize %u\n", __func__, chunksize); + + memset(&req_opts, 0, sizeof(req_opts)); + memset(&hash_parms, 0, sizeof(hash_parms)); + memset(&aead_parms, 0, sizeof(aead_parms)); + + req_opts.is_inbound = !(rctx->is_encrypt); + req_opts.auth_first = ctx->auth_first; + req_opts.is_aead = true; + req_opts.is_esp = ctx->is_esp; + + cipher_parms.alg = ctx->cipher.alg; + cipher_parms.mode = ctx->cipher.mode; + cipher_parms.type = ctx->cipher_type; + cipher_parms.key_buf = ctx->enckey; + cipher_parms.key_len = ctx->enckeylen; + cipher_parms.iv_buf = rctx->msg_buf.iv_ctr; + cipher_parms.iv_len = rctx->iv_ctr_len; + + hash_parms.alg = ctx->auth.alg; + hash_parms.mode = ctx->auth.mode; + hash_parms.type = HASH_TYPE_NONE; + hash_parms.key_buf = (u8 *)ctx->authkey; + hash_parms.key_len = ctx->authkeylen; + hash_parms.digestsize = digestsize; + + if ((ctx->auth.alg == HASH_ALG_SHA224) && + (ctx->authkeylen < SHA224_DIGEST_SIZE)) + hash_parms.key_len = SHA224_DIGEST_SIZE; + + aead_parms.assoc_size = req->assoclen; + if (ctx->is_esp && !ctx->is_rfc4543) { + /* + * 8-byte IV is included assoc data in request. SPU2 + * expects AAD to include just SPI and seqno. So + * subtract off the IV len. + */ + aead_parms.assoc_size -= GCM_RFC4106_IV_SIZE; + + if (rctx->is_encrypt) { + aead_parms.return_iv = true; + aead_parms.ret_iv_len = GCM_RFC4106_IV_SIZE; + aead_parms.ret_iv_off = GCM_ESP_SALT_SIZE; + } + } else { + aead_parms.ret_iv_len = 0; + } + + /* + * Count number of sg entries from the crypto API request that are to + * be included in this mailbox message. For dst sg, don't count space + * for digest. Digest gets caught in a separate buffer and copied back + * to dst sg when processing response. + */ + rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, chunksize); + rctx->dst_nents = spu_sg_count(rctx->dst_sg, rctx->dst_skip, chunksize); + if (aead_parms.assoc_size) + assoc_nents = spu_sg_count(rctx->assoc, 0, + aead_parms.assoc_size); + + mssg = &rctx->mb_mssg; + + rctx->total_sent = chunksize; + rctx->src_sent = chunksize; + if (spu->spu_assoc_resp_len(ctx->cipher.mode, + aead_parms.assoc_size, + aead_parms.ret_iv_len, + rctx->is_encrypt)) + rx_frag_num++; + + aead_parms.iv_len = spu->spu_aead_ivlen(ctx->cipher.mode, + rctx->iv_ctr_len); + + if (ctx->auth.alg == HASH_ALG_AES) + hash_parms.type = (enum hash_type)ctx->cipher_type; + + /* General case AAD padding (CCM and RFC4543 special cases below) */ + aead_parms.aad_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + aead_parms.assoc_size); + + /* General case data padding (CCM decrypt special case below) */ + aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + chunksize); + + if (ctx->cipher.mode == CIPHER_MODE_CCM) { + /* + * for CCM, AAD len + 2 (rather than AAD len) needs to be + * 128-bit aligned + */ + aead_parms.aad_pad_len = spu->spu_gcm_ccm_pad_len( + ctx->cipher.mode, + aead_parms.assoc_size + 2); + + /* + * And when decrypting CCM, need to pad without including + * size of ICV which is tacked on to end of chunk + */ + if (!rctx->is_encrypt) + aead_parms.data_pad_len = + spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, + chunksize - digestsize); + + /* CCM also requires software to rewrite portions of IV: */ + spu->spu_ccm_update_iv(digestsize, &cipher_parms, req->assoclen, + chunksize, rctx->is_encrypt, + ctx->is_esp); + } + + if (ctx->is_rfc4543) { + /* + * RFC4543: data is included in AAD, so don't pad after AAD + * and pad data based on both AAD + data size + */ + aead_parms.aad_pad_len = 0; + if (!rctx->is_encrypt) + aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len( + ctx->cipher.mode, + aead_parms.assoc_size + chunksize - + digestsize); + else + aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len( + ctx->cipher.mode, + aead_parms.assoc_size + chunksize); + + req_opts.is_rfc4543 = true; + } + + if (spu_req_incl_icv(ctx->cipher.mode, rctx->is_encrypt)) { + incl_icv = true; + tx_frag_num++; + /* Copy ICV from end of src scatterlist to digest buf */ + sg_copy_part_to_buf(req->src, rctx->msg_buf.digest, digestsize, + req->assoclen + rctx->total_sent - + digestsize); + } + + atomic64_add(chunksize, &iproc_priv.bytes_out); + + flow_log("%s()-sent chunksize:%u\n", __func__, chunksize); + + /* Prepend SPU header with type 3 BCM header */ + memcpy(rctx->msg_buf.bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN); + + spu_hdr_len = spu->spu_create_request(rctx->msg_buf.bcm_spu_req_hdr + + BCM_HDR_LEN, &req_opts, + &cipher_parms, &hash_parms, + &aead_parms, chunksize); + + /* Determine total length of padding. Put all padding in one buffer. */ + db_size = spu_real_db_size(aead_parms.assoc_size, aead_parms.iv_len, 0, + chunksize, aead_parms.aad_pad_len, + aead_parms.data_pad_len, 0); + + stat_pad_len = spu->spu_wordalign_padlen(db_size); + + if (stat_pad_len) + rx_frag_num++; + pad_len = aead_parms.data_pad_len + stat_pad_len; + if (pad_len) { + tx_frag_num++; + spu->spu_request_pad(rctx->msg_buf.spu_req_pad, + aead_parms.data_pad_len, 0, + ctx->auth.alg, ctx->auth.mode, + rctx->total_sent, stat_pad_len); + } + + spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, + spu_hdr_len); + dump_sg(rctx->assoc, 0, aead_parms.assoc_size); + packet_dump(" aead iv: ", rctx->msg_buf.iv_ctr, aead_parms.iv_len); + packet_log("BD:\n"); + dump_sg(rctx->src_sg, rctx->src_skip, chunksize); + packet_dump(" pad: ", rctx->msg_buf.spu_req_pad, pad_len); + + /* + * Build mailbox message containing SPU request msg and rx buffers + * to catch response message + */ + memset(mssg, 0, sizeof(*mssg)); + mssg->type = BRCM_MESSAGE_SPU; + mssg->ctx = rctx; /* Will be returned in response */ + + /* Create rx scatterlist to catch result */ + rx_frag_num += rctx->dst_nents; + resp_len = chunksize; + + /* + * Always catch ICV in separate buffer. Have to for GCM/CCM because of + * padding. Have to for SHA-224 and other truncated SHAs because SPU + * sends entire digest back. + */ + rx_frag_num++; + + if (((ctx->cipher.mode == CIPHER_MODE_GCM) || + (ctx->cipher.mode == CIPHER_MODE_CCM)) && !rctx->is_encrypt) { + /* + * Input is ciphertxt plus ICV, but ICV not incl + * in output. + */ + resp_len -= ctx->digestsize; + if (resp_len == 0) + /* no rx frags to catch output data */ + rx_frag_num -= rctx->dst_nents; + } + + err = spu_aead_rx_sg_create(mssg, req, rctx, rx_frag_num, + aead_parms.assoc_size, + aead_parms.ret_iv_len, resp_len, digestsize, + stat_pad_len); + if (err) + return err; + + /* Create tx scatterlist containing SPU request message */ + tx_frag_num += rctx->src_nents; + tx_frag_num += assoc_nents; + if (aead_parms.aad_pad_len) + tx_frag_num++; + if (aead_parms.iv_len) + tx_frag_num++; + if (spu->spu_tx_status_len()) + tx_frag_num++; + err = spu_aead_tx_sg_create(mssg, rctx, tx_frag_num, spu_hdr_len, + rctx->assoc, aead_parms.assoc_size, + assoc_nents, aead_parms.iv_len, chunksize, + aead_parms.aad_pad_len, pad_len, incl_icv); + if (err) + return err; + + err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx); + if (unlikely(err < 0)) + return err; + + return -EINPROGRESS; +} + +/** + * handle_aead_resp() - Process a SPU response message for an AEAD request. + * @rctx: Crypto request context + */ +static void handle_aead_resp(struct iproc_reqctx_s *rctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_async_request *areq = rctx->parent; + struct aead_request *req = container_of(areq, + struct aead_request, base); + struct iproc_ctx_s *ctx = rctx->ctx; + u32 payload_len; + unsigned int icv_offset; + u32 result_len; + + /* See how much data was returned */ + payload_len = spu->spu_payload_length(rctx->msg_buf.spu_resp_hdr); + flow_log("payload_len %u\n", payload_len); + + /* only count payload */ + atomic64_add(payload_len, &iproc_priv.bytes_in); + + if (req->assoclen) + packet_dump(" assoc_data ", rctx->msg_buf.a.resp_aad, + req->assoclen); + + /* + * Copy the ICV back to the destination + * buffer. In decrypt case, SPU gives us back the digest, but crypto + * API doesn't expect ICV in dst buffer. + */ + result_len = req->cryptlen; + if (rctx->is_encrypt) { + icv_offset = req->assoclen + rctx->total_sent; + packet_dump(" ICV: ", rctx->msg_buf.digest, ctx->digestsize); + flow_log("copying ICV to dst sg at offset %u\n", icv_offset); + sg_copy_part_from_buf(req->dst, rctx->msg_buf.digest, + ctx->digestsize, icv_offset); + result_len += ctx->digestsize; + } + + packet_log("response data: "); + dump_sg(req->dst, req->assoclen, result_len); + + atomic_inc(&iproc_priv.op_counts[SPU_OP_AEAD]); + if (ctx->cipher.alg == CIPHER_ALG_AES) { + if (ctx->cipher.mode == CIPHER_MODE_CCM) + atomic_inc(&iproc_priv.aead_cnt[AES_CCM]); + else if (ctx->cipher.mode == CIPHER_MODE_GCM) + atomic_inc(&iproc_priv.aead_cnt[AES_GCM]); + else + atomic_inc(&iproc_priv.aead_cnt[AUTHENC]); + } else { + atomic_inc(&iproc_priv.aead_cnt[AUTHENC]); + } +} + +/** + * spu_chunk_cleanup() - Do cleanup after processing one chunk of a request + * @rctx: request context + * + * Mailbox scatterlists are allocated for each chunk. So free them after + * processing each chunk. + */ +static void spu_chunk_cleanup(struct iproc_reqctx_s *rctx) +{ + /* mailbox message used to tx request */ + struct brcm_message *mssg = &rctx->mb_mssg; + + kfree(mssg->spu.src); + kfree(mssg->spu.dst); + memset(mssg, 0, sizeof(struct brcm_message)); +} + +/** + * finish_req() - Used to invoke the complete callback from the requester when + * a request has been handled asynchronously. + * @rctx: Request context + * @err: Indicates whether the request was successful or not + * + * Ensures that cleanup has been done for request + */ +static void finish_req(struct iproc_reqctx_s *rctx, int err) +{ + struct crypto_async_request *areq = rctx->parent; + + flow_log("%s() err:%d\n\n", __func__, err); + + /* No harm done if already called */ + spu_chunk_cleanup(rctx); + + if (areq) + areq->complete(areq, err); +} + +/** + * spu_rx_callback() - Callback from mailbox framework with a SPU response. + * @cl: mailbox client structure for SPU driver + * @msg: mailbox message containing SPU response + */ +static void spu_rx_callback(struct mbox_client *cl, void *msg) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct brcm_message *mssg = msg; + struct iproc_reqctx_s *rctx; + int err; + + rctx = mssg->ctx; + if (unlikely(!rctx)) { + /* This is fatal */ + pr_err("%s(): no request context", __func__); + err = -EFAULT; + goto cb_finish; + } + + /* process the SPU status */ + err = spu->spu_status_process(rctx->msg_buf.rx_stat); + if (err != 0) { + if (err == SPU_INVALID_ICV) + atomic_inc(&iproc_priv.bad_icv); + err = -EBADMSG; + goto cb_finish; + } + + /* Process the SPU response message */ + switch (rctx->ctx->alg->type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + handle_skcipher_resp(rctx); + break; + case CRYPTO_ALG_TYPE_AHASH: + handle_ahash_resp(rctx); + break; + case CRYPTO_ALG_TYPE_AEAD: + handle_aead_resp(rctx); + break; + default: + err = -EINVAL; + goto cb_finish; + } + + /* + * If this response does not complete the request, then send the next + * request chunk. + */ + if (rctx->total_sent < rctx->total_todo) { + /* Deallocate anything specific to previous chunk */ + spu_chunk_cleanup(rctx); + + switch (rctx->ctx->alg->type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + err = handle_skcipher_req(rctx); + break; + case CRYPTO_ALG_TYPE_AHASH: + err = handle_ahash_req(rctx); + if (err == -EAGAIN) + /* + * we saved data in hash carry, but tell crypto + * API we successfully completed request. + */ + err = 0; + break; + case CRYPTO_ALG_TYPE_AEAD: + err = handle_aead_req(rctx); + break; + default: + err = -EINVAL; + } + + if (err == -EINPROGRESS) + /* Successfully submitted request for next chunk */ + return; + } + +cb_finish: + finish_req(rctx, err); +} + +/* ==================== Kernel Cryptographic API ==================== */ + +/** + * skcipher_enqueue() - Handle skcipher encrypt or decrypt request. + * @req: Crypto API request + * @encrypt: true if encrypting; false if decrypting + * + * Return: -EINPROGRESS if request accepted and result will be returned + * asynchronously + * < 0 if an error + */ +static int skcipher_enqueue(struct skcipher_request *req, bool encrypt) +{ + struct iproc_reqctx_s *rctx = skcipher_request_ctx(req); + struct iproc_ctx_s *ctx = + crypto_skcipher_ctx(crypto_skcipher_reqtfm(req)); + int err; + + flow_log("%s() enc:%u\n", __func__, encrypt); + + rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + rctx->parent = &req->base; + rctx->is_encrypt = encrypt; + rctx->bd_suppress = false; + rctx->total_todo = req->cryptlen; + rctx->src_sent = 0; + rctx->total_sent = 0; + rctx->total_received = 0; + rctx->ctx = ctx; + + /* Initialize current position in src and dst scatterlists */ + rctx->src_sg = req->src; + rctx->src_nents = 0; + rctx->src_skip = 0; + rctx->dst_sg = req->dst; + rctx->dst_nents = 0; + rctx->dst_skip = 0; + + if (ctx->cipher.mode == CIPHER_MODE_CBC || + ctx->cipher.mode == CIPHER_MODE_CTR || + ctx->cipher.mode == CIPHER_MODE_OFB || + ctx->cipher.mode == CIPHER_MODE_XTS || + ctx->cipher.mode == CIPHER_MODE_GCM || + ctx->cipher.mode == CIPHER_MODE_CCM) { + rctx->iv_ctr_len = + crypto_skcipher_ivsize(crypto_skcipher_reqtfm(req)); + memcpy(rctx->msg_buf.iv_ctr, req->iv, rctx->iv_ctr_len); + } else { + rctx->iv_ctr_len = 0; + } + + /* Choose a SPU to process this request */ + rctx->chan_idx = select_channel(); + err = handle_skcipher_req(rctx); + if (err != -EINPROGRESS) + /* synchronous result */ + spu_chunk_cleanup(rctx); + + return err; +} + +static int des_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + int err; + + err = verify_skcipher_des_key(cipher, key); + if (err) + return err; + + ctx->cipher_type = CIPHER_TYPE_DES; + return 0; +} + +static int threedes_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + int err; + + err = verify_skcipher_des3_key(cipher, key); + if (err) + return err; + + ctx->cipher_type = CIPHER_TYPE_3DES; + return 0; +} + +static int aes_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + + if (ctx->cipher.mode == CIPHER_MODE_XTS) + /* XTS includes two keys of equal length */ + keylen = keylen / 2; + + switch (keylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + return -EINVAL; + } + WARN_ON((ctx->max_payload != SPU_MAX_PAYLOAD_INF) && + ((ctx->max_payload % AES_BLOCK_SIZE) != 0)); + return 0; +} + +static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key, + unsigned int keylen) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); + struct spu_cipher_parms cipher_parms; + u32 alloc_len = 0; + int err; + + flow_log("skcipher_setkey() keylen: %d\n", keylen); + flow_dump(" key: ", key, keylen); + + switch (ctx->cipher.alg) { + case CIPHER_ALG_DES: + err = des_setkey(cipher, key, keylen); + break; + case CIPHER_ALG_3DES: + err = threedes_setkey(cipher, key, keylen); + break; + case CIPHER_ALG_AES: + err = aes_setkey(cipher, key, keylen); + break; + default: + pr_err("%s() Error: unknown cipher alg\n", __func__); + err = -EINVAL; + } + if (err) + return err; + + memcpy(ctx->enckey, key, keylen); + ctx->enckeylen = keylen; + + /* SPU needs XTS keys in the reverse order the crypto API presents */ + if ((ctx->cipher.alg == CIPHER_ALG_AES) && + (ctx->cipher.mode == CIPHER_MODE_XTS)) { + unsigned int xts_keylen = keylen / 2; + + memcpy(ctx->enckey, key + xts_keylen, xts_keylen); + memcpy(ctx->enckey + xts_keylen, key, xts_keylen); + } + + if (spu->spu_type == SPU_TYPE_SPUM) + alloc_len = BCM_HDR_LEN + SPU_HEADER_ALLOC_LEN; + else if (spu->spu_type == SPU_TYPE_SPU2) + alloc_len = BCM_HDR_LEN + SPU2_HEADER_ALLOC_LEN; + memset(ctx->bcm_spu_req_hdr, 0, alloc_len); + cipher_parms.iv_buf = NULL; + cipher_parms.iv_len = crypto_skcipher_ivsize(cipher); + flow_log("%s: iv_len %u\n", __func__, cipher_parms.iv_len); + + cipher_parms.alg = ctx->cipher.alg; + cipher_parms.mode = ctx->cipher.mode; + cipher_parms.type = ctx->cipher_type; + cipher_parms.key_buf = ctx->enckey; + cipher_parms.key_len = ctx->enckeylen; + + /* Prepend SPU request message with BCM header */ + memcpy(ctx->bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN); + ctx->spu_req_hdr_len = + spu->spu_cipher_req_init(ctx->bcm_spu_req_hdr + BCM_HDR_LEN, + &cipher_parms); + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, + ctx->enckeylen, + false); + + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_CIPHER]); + + return 0; +} + +static int skcipher_encrypt(struct skcipher_request *req) +{ + flow_log("skcipher_encrypt() nbytes:%u\n", req->cryptlen); + + return skcipher_enqueue(req, true); +} + +static int skcipher_decrypt(struct skcipher_request *req) +{ + flow_log("skcipher_decrypt() nbytes:%u\n", req->cryptlen); + return skcipher_enqueue(req, false); +} + +static int ahash_enqueue(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + int err; + const char *alg_name; + + flow_log("ahash_enqueue() nbytes:%u\n", req->nbytes); + + rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + rctx->parent = &req->base; + rctx->ctx = ctx; + rctx->bd_suppress = true; + memset(&rctx->mb_mssg, 0, sizeof(struct brcm_message)); + + /* Initialize position in src scatterlist */ + rctx->src_sg = req->src; + rctx->src_skip = 0; + rctx->src_nents = 0; + rctx->dst_sg = NULL; + rctx->dst_skip = 0; + rctx->dst_nents = 0; + + /* SPU2 hardware does not compute hash of zero length data */ + if ((rctx->is_final == 1) && (rctx->total_todo == 0) && + (iproc_priv.spu.spu_type == SPU_TYPE_SPU2)) { + alg_name = crypto_ahash_alg_name(tfm); + flow_log("Doing %sfinal %s zero-len hash request in software\n", + rctx->is_final ? "" : "non-", alg_name); + err = do_shash((unsigned char *)alg_name, req->result, + NULL, 0, NULL, 0, ctx->authkey, + ctx->authkeylen); + if (err < 0) + flow_log("Hash request failed with error %d\n", err); + return err; + } + /* Choose a SPU to process this request */ + rctx->chan_idx = select_channel(); + + err = handle_ahash_req(rctx); + if (err != -EINPROGRESS) + /* synchronous result */ + spu_chunk_cleanup(rctx); + + if (err == -EAGAIN) + /* + * we saved data in hash carry, but tell crypto API + * we successfully completed request. + */ + err = 0; + + return err; +} + +static int __ahash_init(struct ahash_request *req) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + + flow_log("%s()\n", __func__); + + /* Initialize the context */ + rctx->hash_carry_len = 0; + rctx->is_final = 0; + + rctx->total_todo = 0; + rctx->src_sent = 0; + rctx->total_sent = 0; + rctx->total_received = 0; + + ctx->digestsize = crypto_ahash_digestsize(tfm); + /* If we add a hash whose digest is larger, catch it here. */ + WARN_ON(ctx->digestsize > MAX_DIGEST_SIZE); + + rctx->is_sw_hmac = false; + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, 0, + true); + + return 0; +} + +/** + * spu_no_incr_hash() - Determine whether incremental hashing is supported. + * @ctx: Crypto session context + * + * SPU-2 does not support incremental hashing (we'll have to revisit and + * condition based on chip revision or device tree entry if future versions do + * support incremental hash) + * + * SPU-M also doesn't support incremental hashing of AES-XCBC + * + * Return: true if incremental hashing is not supported + * false otherwise + */ +static bool spu_no_incr_hash(struct iproc_ctx_s *ctx) +{ + struct spu_hw *spu = &iproc_priv.spu; + + if (spu->spu_type == SPU_TYPE_SPU2) + return true; + + if ((ctx->auth.alg == HASH_ALG_AES) && + (ctx->auth.mode == HASH_MODE_XCBC)) + return true; + + /* Otherwise, incremental hashing is supported */ + return false; +} + +static int ahash_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + const char *alg_name; + struct crypto_shash *hash; + int ret; + gfp_t gfp; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + alg_name = crypto_ahash_alg_name(tfm); + hash = crypto_alloc_shash(alg_name, 0, 0); + if (IS_ERR(hash)) { + ret = PTR_ERR(hash); + goto err; + } + + gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + ctx->shash = kmalloc(sizeof(*ctx->shash) + + crypto_shash_descsize(hash), gfp); + if (!ctx->shash) { + ret = -ENOMEM; + goto err_hash; + } + ctx->shash->tfm = hash; + + /* Set the key using data we already have from setkey */ + if (ctx->authkeylen > 0) { + ret = crypto_shash_setkey(hash, ctx->authkey, + ctx->authkeylen); + if (ret) + goto err_shash; + } + + /* Initialize hash w/ this key and other params */ + ret = crypto_shash_init(ctx->shash); + if (ret) + goto err_shash; + } else { + /* Otherwise call the internal function which uses SPU hw */ + ret = __ahash_init(req); + } + + return ret; + +err_shash: + kfree(ctx->shash); +err_hash: + crypto_free_shash(hash); +err: + return ret; +} + +static int __ahash_update(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + + flow_log("ahash_update() nbytes:%u\n", req->nbytes); + + if (!req->nbytes) + return 0; + rctx->total_todo += req->nbytes; + rctx->src_sent = 0; + + return ahash_enqueue(req); +} + +static int ahash_update(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + u8 *tmpbuf; + int ret; + int nents; + gfp_t gfp; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + if (req->src) + nents = sg_nents(req->src); + else + return -EINVAL; + + /* Copy data from req scatterlist to tmp buffer */ + gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + tmpbuf = kmalloc(req->nbytes, gfp); + if (!tmpbuf) + return -ENOMEM; + + if (sg_copy_to_buffer(req->src, nents, tmpbuf, req->nbytes) != + req->nbytes) { + kfree(tmpbuf); + return -EINVAL; + } + + /* Call synchronous update */ + ret = crypto_shash_update(ctx->shash, tmpbuf, req->nbytes); + kfree(tmpbuf); + } else { + /* Otherwise call the internal function which uses SPU hw */ + ret = __ahash_update(req); + } + + return ret; +} + +static int __ahash_final(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + + flow_log("ahash_final() nbytes:%u\n", req->nbytes); + + rctx->is_final = 1; + + return ahash_enqueue(req); +} + +static int ahash_final(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + int ret; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + ret = crypto_shash_final(ctx->shash, req->result); + + /* Done with hash, can deallocate it now */ + crypto_free_shash(ctx->shash->tfm); + kfree(ctx->shash); + + } else { + /* Otherwise call the internal function which uses SPU hw */ + ret = __ahash_final(req); + } + + return ret; +} + +static int __ahash_finup(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + + flow_log("ahash_finup() nbytes:%u\n", req->nbytes); + + rctx->total_todo += req->nbytes; + rctx->src_sent = 0; + rctx->is_final = 1; + + return ahash_enqueue(req); +} + +static int ahash_finup(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + u8 *tmpbuf; + int ret; + int nents; + gfp_t gfp; + + if (spu_no_incr_hash(ctx)) { + /* + * If we get an incremental hashing request and it's not + * supported by the hardware, we need to handle it in software + * by calling synchronous hash functions. + */ + if (req->src) { + nents = sg_nents(req->src); + } else { + ret = -EINVAL; + goto ahash_finup_exit; + } + + /* Copy data from req scatterlist to tmp buffer */ + gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + tmpbuf = kmalloc(req->nbytes, gfp); + if (!tmpbuf) { + ret = -ENOMEM; + goto ahash_finup_exit; + } + + if (sg_copy_to_buffer(req->src, nents, tmpbuf, req->nbytes) != + req->nbytes) { + ret = -EINVAL; + goto ahash_finup_free; + } + + /* Call synchronous update */ + ret = crypto_shash_finup(ctx->shash, tmpbuf, req->nbytes, + req->result); + } else { + /* Otherwise call the internal function which uses SPU hw */ + return __ahash_finup(req); + } +ahash_finup_free: + kfree(tmpbuf); + +ahash_finup_exit: + /* Done with hash, can deallocate it now */ + crypto_free_shash(ctx->shash->tfm); + kfree(ctx->shash); + return ret; +} + +static int ahash_digest(struct ahash_request *req) +{ + int err; + + flow_log("ahash_digest() nbytes:%u\n", req->nbytes); + + /* whole thing at once */ + err = __ahash_init(req); + if (!err) + err = __ahash_finup(req); + + return err; +} + +static int ahash_setkey(struct crypto_ahash *ahash, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_ahash_ctx(ahash); + + flow_log("%s() ahash:%p key:%p keylen:%u\n", + __func__, ahash, key, keylen); + flow_dump(" key: ", key, keylen); + + if (ctx->auth.alg == HASH_ALG_AES) { + switch (keylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + pr_err("%s() Error: Invalid key length\n", __func__); + return -EINVAL; + } + } else { + pr_err("%s() Error: unknown hash alg\n", __func__); + return -EINVAL; + } + memcpy(ctx->authkey, key, keylen); + ctx->authkeylen = keylen; + + return 0; +} + +static int ahash_export(struct ahash_request *req, void *out) +{ + const struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct spu_hash_export_s *spu_exp = (struct spu_hash_export_s *)out; + + spu_exp->total_todo = rctx->total_todo; + spu_exp->total_sent = rctx->total_sent; + spu_exp->is_sw_hmac = rctx->is_sw_hmac; + memcpy(spu_exp->hash_carry, rctx->hash_carry, sizeof(rctx->hash_carry)); + spu_exp->hash_carry_len = rctx->hash_carry_len; + memcpy(spu_exp->incr_hash, rctx->incr_hash, sizeof(rctx->incr_hash)); + + return 0; +} + +static int ahash_import(struct ahash_request *req, const void *in) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct spu_hash_export_s *spu_exp = (struct spu_hash_export_s *)in; + + rctx->total_todo = spu_exp->total_todo; + rctx->total_sent = spu_exp->total_sent; + rctx->is_sw_hmac = spu_exp->is_sw_hmac; + memcpy(rctx->hash_carry, spu_exp->hash_carry, sizeof(rctx->hash_carry)); + rctx->hash_carry_len = spu_exp->hash_carry_len; + memcpy(rctx->incr_hash, spu_exp->incr_hash, sizeof(rctx->incr_hash)); + + return 0; +} + +static int ahash_hmac_setkey(struct crypto_ahash *ahash, const u8 *key, + unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_ahash_ctx(ahash); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash)); + unsigned int digestsize = crypto_ahash_digestsize(ahash); + unsigned int index; + int rc; + + flow_log("%s() ahash:%p key:%p keylen:%u blksz:%u digestsz:%u\n", + __func__, ahash, key, keylen, blocksize, digestsize); + flow_dump(" key: ", key, keylen); + + if (keylen > blocksize) { + switch (ctx->auth.alg) { + case HASH_ALG_MD5: + rc = do_shash("md5", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA1: + rc = do_shash("sha1", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA224: + rc = do_shash("sha224", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA256: + rc = do_shash("sha256", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA384: + rc = do_shash("sha384", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA512: + rc = do_shash("sha512", ctx->authkey, key, keylen, NULL, + 0, NULL, 0); + break; + case HASH_ALG_SHA3_224: + rc = do_shash("sha3-224", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + case HASH_ALG_SHA3_256: + rc = do_shash("sha3-256", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + case HASH_ALG_SHA3_384: + rc = do_shash("sha3-384", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + case HASH_ALG_SHA3_512: + rc = do_shash("sha3-512", ctx->authkey, key, keylen, + NULL, 0, NULL, 0); + break; + default: + pr_err("%s() Error: unknown hash alg\n", __func__); + return -EINVAL; + } + if (rc < 0) { + pr_err("%s() Error %d computing shash for %s\n", + __func__, rc, hash_alg_name[ctx->auth.alg]); + return rc; + } + ctx->authkeylen = digestsize; + + flow_log(" keylen > digestsize... hashed\n"); + flow_dump(" newkey: ", ctx->authkey, ctx->authkeylen); + } else { + memcpy(ctx->authkey, key, keylen); + ctx->authkeylen = keylen; + } + + /* + * Full HMAC operation in SPUM is not verified, + * So keeping the generation of IPAD, OPAD and + * outer hashing in software. + */ + if (iproc_priv.spu.spu_type == SPU_TYPE_SPUM) { + memcpy(ctx->ipad, ctx->authkey, ctx->authkeylen); + memset(ctx->ipad + ctx->authkeylen, 0, + blocksize - ctx->authkeylen); + ctx->authkeylen = 0; + memcpy(ctx->opad, ctx->ipad, blocksize); + + for (index = 0; index < blocksize; index++) { + ctx->ipad[index] ^= HMAC_IPAD_VALUE; + ctx->opad[index] ^= HMAC_OPAD_VALUE; + } + + flow_dump(" ipad: ", ctx->ipad, blocksize); + flow_dump(" opad: ", ctx->opad, blocksize); + } + ctx->digestsize = digestsize; + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_HMAC]); + + return 0; +} + +static int ahash_hmac_init(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm)); + + flow_log("ahash_hmac_init()\n"); + + /* init the context as a hash */ + ahash_init(req); + + if (!spu_no_incr_hash(ctx)) { + /* SPU-M can do incr hashing but needs sw for outer HMAC */ + rctx->is_sw_hmac = true; + ctx->auth.mode = HASH_MODE_HASH; + /* start with a prepended ipad */ + memcpy(rctx->hash_carry, ctx->ipad, blocksize); + rctx->hash_carry_len = blocksize; + rctx->total_todo += blocksize; + } + + return 0; +} + +static int ahash_hmac_update(struct ahash_request *req) +{ + flow_log("ahash_hmac_update() nbytes:%u\n", req->nbytes); + + if (!req->nbytes) + return 0; + + return ahash_update(req); +} + +static int ahash_hmac_final(struct ahash_request *req) +{ + flow_log("ahash_hmac_final() nbytes:%u\n", req->nbytes); + + return ahash_final(req); +} + +static int ahash_hmac_finup(struct ahash_request *req) +{ + flow_log("ahash_hmac_finupl() nbytes:%u\n", req->nbytes); + + return ahash_finup(req); +} + +static int ahash_hmac_digest(struct ahash_request *req) +{ + struct iproc_reqctx_s *rctx = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm); + unsigned int blocksize = + crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm)); + + flow_log("ahash_hmac_digest() nbytes:%u\n", req->nbytes); + + /* Perform initialization and then call finup */ + __ahash_init(req); + + if (iproc_priv.spu.spu_type == SPU_TYPE_SPU2) { + /* + * SPU2 supports full HMAC implementation in the + * hardware, need not to generate IPAD, OPAD and + * outer hash in software. + * Only for hash key len > hash block size, SPU2 + * expects to perform hashing on the key, shorten + * it to digest size and feed it as hash key. + */ + rctx->is_sw_hmac = false; + ctx->auth.mode = HASH_MODE_HMAC; + } else { + rctx->is_sw_hmac = true; + ctx->auth.mode = HASH_MODE_HASH; + /* start with a prepended ipad */ + memcpy(rctx->hash_carry, ctx->ipad, blocksize); + rctx->hash_carry_len = blocksize; + rctx->total_todo += blocksize; + } + + return __ahash_finup(req); +} + +/* aead helpers */ + +static int aead_need_fallback(struct aead_request *req) +{ + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct spu_hw *spu = &iproc_priv.spu; + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_aead_ctx(aead); + u32 payload_len; + + /* + * SPU hardware cannot handle the AES-GCM/CCM case where plaintext + * and AAD are both 0 bytes long. So use fallback in this case. + */ + if (((ctx->cipher.mode == CIPHER_MODE_GCM) || + (ctx->cipher.mode == CIPHER_MODE_CCM)) && + (req->assoclen == 0)) { + if ((rctx->is_encrypt && (req->cryptlen == 0)) || + (!rctx->is_encrypt && (req->cryptlen == ctx->digestsize))) { + flow_log("AES GCM/CCM needs fallback for 0 len req\n"); + return 1; + } + } + + /* SPU-M hardware only supports CCM digest size of 8, 12, or 16 bytes */ + if ((ctx->cipher.mode == CIPHER_MODE_CCM) && + (spu->spu_type == SPU_TYPE_SPUM) && + (ctx->digestsize != 8) && (ctx->digestsize != 12) && + (ctx->digestsize != 16)) { + flow_log("%s() AES CCM needs fallback for digest size %d\n", + __func__, ctx->digestsize); + return 1; + } + + /* + * SPU-M on NSP has an issue where AES-CCM hash is not correct + * when AAD size is 0 + */ + if ((ctx->cipher.mode == CIPHER_MODE_CCM) && + (spu->spu_subtype == SPU_SUBTYPE_SPUM_NSP) && + (req->assoclen == 0)) { + flow_log("%s() AES_CCM needs fallback for 0 len AAD on NSP\n", + __func__); + return 1; + } + + /* + * RFC4106 and RFC4543 cannot handle the case where AAD is other than + * 16 or 20 bytes long. So use fallback in this case. + */ + if (ctx->cipher.mode == CIPHER_MODE_GCM && + ctx->cipher.alg == CIPHER_ALG_AES && + rctx->iv_ctr_len == GCM_RFC4106_IV_SIZE && + req->assoclen != 16 && req->assoclen != 20) { + flow_log("RFC4106/RFC4543 needs fallback for assoclen" + " other than 16 or 20 bytes\n"); + return 1; + } + + payload_len = req->cryptlen; + if (spu->spu_type == SPU_TYPE_SPUM) + payload_len += req->assoclen; + + flow_log("%s() payload len: %u\n", __func__, payload_len); + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + return 0; + else + return payload_len > ctx->max_payload; +} + +static void aead_complete(struct crypto_async_request *areq, int err) +{ + struct aead_request *req = + container_of(areq, struct aead_request, base); + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct crypto_aead *aead = crypto_aead_reqtfm(req); + + flow_log("%s() err:%d\n", __func__, err); + + areq->tfm = crypto_aead_tfm(aead); + + areq->complete = rctx->old_complete; + areq->data = rctx->old_data; + + areq->complete(areq, err); +} + +static int aead_do_fallback(struct aead_request *req, bool is_encrypt) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + int err; + u32 req_flags; + + flow_log("%s() enc:%u\n", __func__, is_encrypt); + + if (ctx->fallback_cipher) { + /* Store the cipher tfm and then use the fallback tfm */ + rctx->old_tfm = tfm; + aead_request_set_tfm(req, ctx->fallback_cipher); + /* + * Save the callback and chain ourselves in, so we can restore + * the tfm + */ + rctx->old_complete = req->base.complete; + rctx->old_data = req->base.data; + req_flags = aead_request_flags(req); + aead_request_set_callback(req, req_flags, aead_complete, req); + err = is_encrypt ? crypto_aead_encrypt(req) : + crypto_aead_decrypt(req); + + if (err == 0) { + /* + * fallback was synchronous (did not return + * -EINPROGRESS). So restore request state here. + */ + aead_request_set_callback(req, req_flags, + rctx->old_complete, req); + req->base.data = rctx->old_data; + aead_request_set_tfm(req, aead); + flow_log("%s() fallback completed successfully\n\n", + __func__); + } + } else { + err = -EINVAL; + } + + return err; +} + +static int aead_enqueue(struct aead_request *req, bool is_encrypt) +{ + struct iproc_reqctx_s *rctx = aead_request_ctx(req); + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct iproc_ctx_s *ctx = crypto_aead_ctx(aead); + int err; + + flow_log("%s() enc:%u\n", __func__, is_encrypt); + + if (req->assoclen > MAX_ASSOC_SIZE) { + pr_err + ("%s() Error: associated data too long. (%u > %u bytes)\n", + __func__, req->assoclen, MAX_ASSOC_SIZE); + return -EINVAL; + } + + rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC; + rctx->parent = &req->base; + rctx->is_encrypt = is_encrypt; + rctx->bd_suppress = false; + rctx->total_todo = req->cryptlen; + rctx->src_sent = 0; + rctx->total_sent = 0; + rctx->total_received = 0; + rctx->is_sw_hmac = false; + rctx->ctx = ctx; + memset(&rctx->mb_mssg, 0, sizeof(struct brcm_message)); + + /* assoc data is at start of src sg */ + rctx->assoc = req->src; + + /* + * Init current position in src scatterlist to be after assoc data. + * src_skip set to buffer offset where data begins. (Assoc data could + * end in the middle of a buffer.) + */ + if (spu_sg_at_offset(req->src, req->assoclen, &rctx->src_sg, + &rctx->src_skip) < 0) { + pr_err("%s() Error: Unable to find start of src data\n", + __func__); + return -EINVAL; + } + + rctx->src_nents = 0; + rctx->dst_nents = 0; + if (req->dst == req->src) { + rctx->dst_sg = rctx->src_sg; + rctx->dst_skip = rctx->src_skip; + } else { + /* + * Expect req->dst to have room for assoc data followed by + * output data and ICV, if encrypt. So initialize dst_sg + * to point beyond assoc len offset. + */ + if (spu_sg_at_offset(req->dst, req->assoclen, &rctx->dst_sg, + &rctx->dst_skip) < 0) { + pr_err("%s() Error: Unable to find start of dst data\n", + __func__); + return -EINVAL; + } + } + + if (ctx->cipher.mode == CIPHER_MODE_CBC || + ctx->cipher.mode == CIPHER_MODE_CTR || + ctx->cipher.mode == CIPHER_MODE_OFB || + ctx->cipher.mode == CIPHER_MODE_XTS || + ctx->cipher.mode == CIPHER_MODE_GCM) { + rctx->iv_ctr_len = + ctx->salt_len + + crypto_aead_ivsize(crypto_aead_reqtfm(req)); + } else if (ctx->cipher.mode == CIPHER_MODE_CCM) { + rctx->iv_ctr_len = CCM_AES_IV_SIZE; + } else { + rctx->iv_ctr_len = 0; + } + + rctx->hash_carry_len = 0; + + flow_log(" src sg: %p\n", req->src); + flow_log(" rctx->src_sg: %p, src_skip %u\n", + rctx->src_sg, rctx->src_skip); + flow_log(" assoc: %p, assoclen %u\n", rctx->assoc, req->assoclen); + flow_log(" dst sg: %p\n", req->dst); + flow_log(" rctx->dst_sg: %p, dst_skip %u\n", + rctx->dst_sg, rctx->dst_skip); + flow_log(" iv_ctr_len:%u\n", rctx->iv_ctr_len); + flow_dump(" iv: ", req->iv, rctx->iv_ctr_len); + flow_log(" authkeylen:%u\n", ctx->authkeylen); + flow_log(" is_esp: %s\n", ctx->is_esp ? "yes" : "no"); + + if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) + flow_log(" max_payload infinite"); + else + flow_log(" max_payload: %u\n", ctx->max_payload); + + if (unlikely(aead_need_fallback(req))) + return aead_do_fallback(req, is_encrypt); + + /* + * Do memory allocations for request after fallback check, because if we + * do fallback, we won't call finish_req() to dealloc. + */ + if (rctx->iv_ctr_len) { + if (ctx->salt_len) + memcpy(rctx->msg_buf.iv_ctr + ctx->salt_offset, + ctx->salt, ctx->salt_len); + memcpy(rctx->msg_buf.iv_ctr + ctx->salt_offset + ctx->salt_len, + req->iv, + rctx->iv_ctr_len - ctx->salt_len - ctx->salt_offset); + } + + rctx->chan_idx = select_channel(); + err = handle_aead_req(rctx); + if (err != -EINPROGRESS) + /* synchronous result */ + spu_chunk_cleanup(rctx); + + return err; +} + +static int aead_authenc_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + struct crypto_tfm *tfm = crypto_aead_tfm(cipher); + struct crypto_authenc_keys keys; + int ret; + + flow_log("%s() aead:%p key:%p keylen:%u\n", __func__, cipher, key, + keylen); + flow_dump(" key: ", key, keylen); + + ret = crypto_authenc_extractkeys(&keys, key, keylen); + if (ret) + goto badkey; + + if (keys.enckeylen > MAX_KEY_SIZE || + keys.authkeylen > MAX_KEY_SIZE) + goto badkey; + + ctx->enckeylen = keys.enckeylen; + ctx->authkeylen = keys.authkeylen; + + memcpy(ctx->enckey, keys.enckey, keys.enckeylen); + /* May end up padding auth key. So make sure it's zeroed. */ + memset(ctx->authkey, 0, sizeof(ctx->authkey)); + memcpy(ctx->authkey, keys.authkey, keys.authkeylen); + + switch (ctx->alg->cipher_info.alg) { + case CIPHER_ALG_DES: + if (verify_aead_des_key(cipher, keys.enckey, keys.enckeylen)) + return -EINVAL; + + ctx->cipher_type = CIPHER_TYPE_DES; + break; + case CIPHER_ALG_3DES: + if (verify_aead_des3_key(cipher, keys.enckey, keys.enckeylen)) + return -EINVAL; + + ctx->cipher_type = CIPHER_TYPE_3DES; + break; + case CIPHER_ALG_AES: + switch (ctx->enckeylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + goto badkey; + } + break; + default: + pr_err("%s() Error: Unknown cipher alg\n", __func__); + return -EINVAL; + } + + flow_log(" enckeylen:%u authkeylen:%u\n", ctx->enckeylen, + ctx->authkeylen); + flow_dump(" enc: ", ctx->enckey, ctx->enckeylen); + flow_dump(" auth: ", ctx->authkey, ctx->authkeylen); + + /* setkey the fallback just in case we needto use it */ + if (ctx->fallback_cipher) { + flow_log(" running fallback setkey()\n"); + + ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + ctx->fallback_cipher->base.crt_flags |= + tfm->crt_flags & CRYPTO_TFM_REQ_MASK; + ret = crypto_aead_setkey(ctx->fallback_cipher, key, keylen); + if (ret) + flow_log(" fallback setkey() returned:%d\n", ret); + } + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, + ctx->enckeylen, + false); + + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_AEAD]); + + return ret; + +badkey: + ctx->enckeylen = 0; + ctx->authkeylen = 0; + ctx->digestsize = 0; + + return -EINVAL; +} + +static int aead_gcm_ccm_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + struct crypto_tfm *tfm = crypto_aead_tfm(cipher); + + int ret = 0; + + flow_log("%s() keylen:%u\n", __func__, keylen); + flow_dump(" key: ", key, keylen); + + if (!ctx->is_esp) + ctx->digestsize = keylen; + + ctx->enckeylen = keylen; + ctx->authkeylen = 0; + + switch (ctx->enckeylen) { + case AES_KEYSIZE_128: + ctx->cipher_type = CIPHER_TYPE_AES128; + break; + case AES_KEYSIZE_192: + ctx->cipher_type = CIPHER_TYPE_AES192; + break; + case AES_KEYSIZE_256: + ctx->cipher_type = CIPHER_TYPE_AES256; + break; + default: + goto badkey; + } + + memcpy(ctx->enckey, key, ctx->enckeylen); + + flow_log(" enckeylen:%u authkeylen:%u\n", ctx->enckeylen, + ctx->authkeylen); + flow_dump(" enc: ", ctx->enckey, ctx->enckeylen); + flow_dump(" auth: ", ctx->authkey, ctx->authkeylen); + + /* setkey the fallback just in case we need to use it */ + if (ctx->fallback_cipher) { + flow_log(" running fallback setkey()\n"); + + ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + ctx->fallback_cipher->base.crt_flags |= + tfm->crt_flags & CRYPTO_TFM_REQ_MASK; + ret = crypto_aead_setkey(ctx->fallback_cipher, key, + keylen + ctx->salt_len); + if (ret) + flow_log(" fallback setkey() returned:%d\n", ret); + } + + ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, + ctx->enckeylen, + false); + + atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_AEAD]); + + flow_log(" enckeylen:%u authkeylen:%u\n", ctx->enckeylen, + ctx->authkeylen); + + return ret; + +badkey: + ctx->enckeylen = 0; + ctx->authkeylen = 0; + ctx->digestsize = 0; + + return -EINVAL; +} + +/** + * aead_gcm_esp_setkey() - setkey() operation for ESP variant of GCM AES. + * @cipher: AEAD structure + * @key: Key followed by 4 bytes of salt + * @keylen: Length of key plus salt, in bytes + * + * Extracts salt from key and stores it to be prepended to IV on each request. + * Digest is always 16 bytes + * + * Return: Value from generic gcm setkey. + */ +static int aead_gcm_esp_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + + flow_log("%s\n", __func__); + + if (keylen < GCM_ESP_SALT_SIZE) + return -EINVAL; + + ctx->salt_len = GCM_ESP_SALT_SIZE; + ctx->salt_offset = GCM_ESP_SALT_OFFSET; + memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE); + keylen -= GCM_ESP_SALT_SIZE; + ctx->digestsize = GCM_ESP_DIGESTSIZE; + ctx->is_esp = true; + flow_dump("salt: ", ctx->salt, GCM_ESP_SALT_SIZE); + + return aead_gcm_ccm_setkey(cipher, key, keylen); +} + +/** + * rfc4543_gcm_esp_setkey() - setkey operation for RFC4543 variant of GCM/GMAC. + * @cipher: AEAD structure + * @key: Key followed by 4 bytes of salt + * @keylen: Length of key plus salt, in bytes + * + * Extracts salt from key and stores it to be prepended to IV on each request. + * Digest is always 16 bytes + * + * Return: Value from generic gcm setkey. + */ +static int rfc4543_gcm_esp_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + + flow_log("%s\n", __func__); + + if (keylen < GCM_ESP_SALT_SIZE) + return -EINVAL; + + ctx->salt_len = GCM_ESP_SALT_SIZE; + ctx->salt_offset = GCM_ESP_SALT_OFFSET; + memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE); + keylen -= GCM_ESP_SALT_SIZE; + ctx->digestsize = GCM_ESP_DIGESTSIZE; + ctx->is_esp = true; + ctx->is_rfc4543 = true; + flow_dump("salt: ", ctx->salt, GCM_ESP_SALT_SIZE); + + return aead_gcm_ccm_setkey(cipher, key, keylen); +} + +/** + * aead_ccm_esp_setkey() - setkey() operation for ESP variant of CCM AES. + * @cipher: AEAD structure + * @key: Key followed by 4 bytes of salt + * @keylen: Length of key plus salt, in bytes + * + * Extracts salt from key and stores it to be prepended to IV on each request. + * Digest is always 16 bytes + * + * Return: Value from generic ccm setkey. + */ +static int aead_ccm_esp_setkey(struct crypto_aead *cipher, + const u8 *key, unsigned int keylen) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + + flow_log("%s\n", __func__); + + if (keylen < CCM_ESP_SALT_SIZE) + return -EINVAL; + + ctx->salt_len = CCM_ESP_SALT_SIZE; + ctx->salt_offset = CCM_ESP_SALT_OFFSET; + memcpy(ctx->salt, key + keylen - CCM_ESP_SALT_SIZE, CCM_ESP_SALT_SIZE); + keylen -= CCM_ESP_SALT_SIZE; + ctx->is_esp = true; + flow_dump("salt: ", ctx->salt, CCM_ESP_SALT_SIZE); + + return aead_gcm_ccm_setkey(cipher, key, keylen); +} + +static int aead_setauthsize(struct crypto_aead *cipher, unsigned int authsize) +{ + struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher); + int ret = 0; + + flow_log("%s() authkeylen:%u authsize:%u\n", + __func__, ctx->authkeylen, authsize); + + ctx->digestsize = authsize; + + /* setkey the fallback just in case we needto use it */ + if (ctx->fallback_cipher) { + flow_log(" running fallback setauth()\n"); + + ret = crypto_aead_setauthsize(ctx->fallback_cipher, authsize); + if (ret) + flow_log(" fallback setauth() returned:%d\n", ret); + } + + return ret; +} + +static int aead_encrypt(struct aead_request *req) +{ + flow_log("%s() cryptlen:%u %08x\n", __func__, req->cryptlen, + req->cryptlen); + dump_sg(req->src, 0, req->cryptlen + req->assoclen); + flow_log(" assoc_len:%u\n", req->assoclen); + + return aead_enqueue(req, true); +} + +static int aead_decrypt(struct aead_request *req) +{ + flow_log("%s() cryptlen:%u\n", __func__, req->cryptlen); + dump_sg(req->src, 0, req->cryptlen + req->assoclen); + flow_log(" assoc_len:%u\n", req->assoclen); + + return aead_enqueue(req, false); +} + +/* ==================== Supported Cipher Algorithms ==================== */ + +static struct iproc_alg_s driver_algs[] = { + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "gcm(aes)", + .cra_driver_name = "gcm-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_gcm_ccm_setkey, + .ivsize = GCM_AES_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_GCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_GCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "ccm(aes)", + .cra_driver_name = "ccm-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_gcm_ccm_setkey, + .ivsize = CCM_AES_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_CCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "rfc4106(gcm(aes))", + .cra_driver_name = "gcm-aes-esp-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_gcm_esp_setkey, + .ivsize = GCM_RFC4106_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_GCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_GCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "rfc4309(ccm(aes))", + .cra_driver_name = "ccm-aes-esp-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = aead_ccm_esp_setkey, + .ivsize = CCM_AES_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_CCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "rfc4543(gcm(aes))", + .cra_driver_name = "gmac-aes-esp-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK + }, + .setkey = rfc4543_gcm_esp_setkey, + .ivsize = GCM_RFC4106_IV_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_GCM, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_GCM, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(md5),cbc(aes))", + .cra_driver_name = "authenc-hmac-md5-cbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = MD5_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha1),cbc(aes))", + .cra_driver_name = "authenc-hmac-sha1-cbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = SHA1_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha256),cbc(aes))", + .cra_driver_name = "authenc-hmac-sha256-cbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = SHA256_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(md5),cbc(des))", + .cra_driver_name = "authenc-hmac-md5-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = MD5_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha1),cbc(des))", + .cra_driver_name = "authenc-hmac-sha1-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA1_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha224),cbc(des))", + .cra_driver_name = "authenc-hmac-sha224-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA224_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha256),cbc(des))", + .cra_driver_name = "authenc-hmac-sha256-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA256_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha384),cbc(des))", + .cra_driver_name = "authenc-hmac-sha384-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA384_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha512),cbc(des))", + .cra_driver_name = "authenc-hmac-sha512-cbc-des-iproc", + .cra_blocksize = DES_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES_BLOCK_SIZE, + .maxauthsize = SHA512_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(md5),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-md5-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = MD5_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha1),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha1-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA1_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha224),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha224-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA224_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha256),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha256-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA256_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha384),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha384-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA384_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + { + .type = CRYPTO_ALG_TYPE_AEAD, + .alg.aead = { + .base = { + .cra_name = "authenc(hmac(sha512),cbc(des3_ede))", + .cra_driver_name = "authenc-hmac-sha512-cbc-des3-iproc", + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_flags = CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY + }, + .setkey = aead_authenc_setkey, + .ivsize = DES3_EDE_BLOCK_SIZE, + .maxauthsize = SHA512_DIGEST_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HMAC, + }, + .auth_first = 0, + }, + +/* SKCIPHER algorithms. */ + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ofb(des)", + .base.cra_driver_name = "ofb-des-iproc", + .base.cra_blocksize = DES_BLOCK_SIZE, + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = DES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_OFB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "cbc(des)", + .base.cra_driver_name = "cbc-des-iproc", + .base.cra_blocksize = DES_BLOCK_SIZE, + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = DES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ecb(des)", + .base.cra_driver_name = "ecb-des-iproc", + .base.cra_blocksize = DES_BLOCK_SIZE, + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = 0, + }, + .cipher_info = { + .alg = CIPHER_ALG_DES, + .mode = CIPHER_MODE_ECB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ofb(des3_ede)", + .base.cra_driver_name = "ofb-des3-iproc", + .base.cra_blocksize = DES3_EDE_BLOCK_SIZE, + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = DES3_EDE_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_OFB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "cbc(des3_ede)", + .base.cra_driver_name = "cbc-des3-iproc", + .base.cra_blocksize = DES3_EDE_BLOCK_SIZE, + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = DES3_EDE_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ecb(des3_ede)", + .base.cra_driver_name = "ecb-des3-iproc", + .base.cra_blocksize = DES3_EDE_BLOCK_SIZE, + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = 0, + }, + .cipher_info = { + .alg = CIPHER_ALG_3DES, + .mode = CIPHER_MODE_ECB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ofb(aes)", + .base.cra_driver_name = "ofb-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_OFB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "cbc(aes)", + .base.cra_driver_name = "cbc-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CBC, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ecb(aes)", + .base.cra_driver_name = "ecb-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = 0, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_ECB, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + { + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "ctr(aes)", + .base.cra_driver_name = "ctr-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_CTR, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, +{ + .type = CRYPTO_ALG_TYPE_SKCIPHER, + .alg.skcipher = { + .base.cra_name = "xts(aes)", + .base.cra_driver_name = "xts-aes-iproc", + .base.cra_blocksize = AES_BLOCK_SIZE, + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + .cipher_info = { + .alg = CIPHER_ALG_AES, + .mode = CIPHER_MODE_XTS, + }, + .auth_info = { + .alg = HASH_ALG_NONE, + .mode = HASH_MODE_NONE, + }, + }, + +/* AHASH algorithms. */ + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = MD5_DIGEST_SIZE, + .halg.base = { + .cra_name = "md5", + .cra_driver_name = "md5-iproc", + .cra_blocksize = MD5_BLOCK_WORDS * 4, + .cra_flags = CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = MD5_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(md5)", + .cra_driver_name = "hmac-md5-iproc", + .cra_blocksize = MD5_BLOCK_WORDS * 4, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_MD5, + .mode = HASH_MODE_HMAC, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA1_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-iproc", + .cra_blocksize = SHA1_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HASH, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA1_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha1)", + .cra_driver_name = "hmac-sha1-iproc", + .cra_blocksize = SHA1_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA1, + .mode = HASH_MODE_HMAC, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA224_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-iproc", + .cra_blocksize = SHA224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HASH, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA224_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha224)", + .cra_driver_name = "hmac-sha224-iproc", + .cra_blocksize = SHA224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA224, + .mode = HASH_MODE_HMAC, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA256_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-iproc", + .cra_blocksize = SHA256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HASH, + }, + }, + {.type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA256_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha256)", + .cra_driver_name = "hmac-sha256-iproc", + .cra_blocksize = SHA256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA256, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA384_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha384", + .cra_driver_name = "sha384-iproc", + .cra_blocksize = SHA384_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA384_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha384)", + .cra_driver_name = "hmac-sha384-iproc", + .cra_blocksize = SHA384_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA384, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA512_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha512", + .cra_driver_name = "sha512-iproc", + .cra_blocksize = SHA512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA512_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha512)", + .cra_driver_name = "hmac-sha512-iproc", + .cra_blocksize = SHA512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA512, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_224_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-224", + .cra_driver_name = "sha3-224-iproc", + .cra_blocksize = SHA3_224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_224, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_224_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-224)", + .cra_driver_name = "hmac-sha3-224-iproc", + .cra_blocksize = SHA3_224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_224, + .mode = HASH_MODE_HMAC + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_256_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-256", + .cra_driver_name = "sha3-256-iproc", + .cra_blocksize = SHA3_256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_256, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_256_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-256)", + .cra_driver_name = "hmac-sha3-256-iproc", + .cra_blocksize = SHA3_256_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_256, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_384_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-384", + .cra_driver_name = "sha3-384-iproc", + .cra_blocksize = SHA3_224_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_384, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_384_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-384)", + .cra_driver_name = "hmac-sha3-384-iproc", + .cra_blocksize = SHA3_384_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_384, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_512_DIGEST_SIZE, + .halg.base = { + .cra_name = "sha3-512", + .cra_driver_name = "sha3-512-iproc", + .cra_blocksize = SHA3_512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_512, + .mode = HASH_MODE_HASH, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = SHA3_512_DIGEST_SIZE, + .halg.base = { + .cra_name = "hmac(sha3-512)", + .cra_driver_name = "hmac-sha3-512-iproc", + .cra_blocksize = SHA3_512_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_SHA3_512, + .mode = HASH_MODE_HMAC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = AES_BLOCK_SIZE, + .halg.base = { + .cra_name = "xcbc(aes)", + .cra_driver_name = "xcbc-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_XCBC, + }, + }, + { + .type = CRYPTO_ALG_TYPE_AHASH, + .alg.hash = { + .halg.digestsize = AES_BLOCK_SIZE, + .halg.base = { + .cra_name = "cmac(aes)", + .cra_driver_name = "cmac-aes-iproc", + .cra_blocksize = AES_BLOCK_SIZE, + } + }, + .cipher_info = { + .alg = CIPHER_ALG_NONE, + .mode = CIPHER_MODE_NONE, + }, + .auth_info = { + .alg = HASH_ALG_AES, + .mode = HASH_MODE_CMAC, + }, + }, +}; + +static int generic_cra_init(struct crypto_tfm *tfm, + struct iproc_alg_s *cipher_alg) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + unsigned int blocksize = crypto_tfm_alg_blocksize(tfm); + + flow_log("%s()\n", __func__); + + ctx->alg = cipher_alg; + ctx->cipher = cipher_alg->cipher_info; + ctx->auth = cipher_alg->auth_info; + ctx->auth_first = cipher_alg->auth_first; + ctx->max_payload = spu->spu_ctx_max_payload(ctx->cipher.alg, + ctx->cipher.mode, + blocksize); + ctx->fallback_cipher = NULL; + + ctx->enckeylen = 0; + ctx->authkeylen = 0; + + atomic_inc(&iproc_priv.stream_count); + atomic_inc(&iproc_priv.session_count); + + return 0; +} + +static int skcipher_init_tfm(struct crypto_skcipher *skcipher) +{ + struct crypto_tfm *tfm = crypto_skcipher_tfm(skcipher); + struct skcipher_alg *alg = crypto_skcipher_alg(skcipher); + struct iproc_alg_s *cipher_alg; + + flow_log("%s()\n", __func__); + + crypto_skcipher_set_reqsize(skcipher, sizeof(struct iproc_reqctx_s)); + + cipher_alg = container_of(alg, struct iproc_alg_s, alg.skcipher); + return generic_cra_init(tfm, cipher_alg); +} + +static int ahash_cra_init(struct crypto_tfm *tfm) +{ + int err; + struct crypto_alg *alg = tfm->__crt_alg; + struct iproc_alg_s *cipher_alg; + + cipher_alg = container_of(__crypto_ahash_alg(alg), struct iproc_alg_s, + alg.hash); + + err = generic_cra_init(tfm, cipher_alg); + flow_log("%s()\n", __func__); + + /* + * export state size has to be < 512 bytes. So don't include msg bufs + * in state size. + */ + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), + sizeof(struct iproc_reqctx_s)); + + return err; +} + +static int aead_cra_init(struct crypto_aead *aead) +{ + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + struct crypto_alg *alg = tfm->__crt_alg; + struct aead_alg *aalg = container_of(alg, struct aead_alg, base); + struct iproc_alg_s *cipher_alg = container_of(aalg, struct iproc_alg_s, + alg.aead); + + int err = generic_cra_init(tfm, cipher_alg); + + flow_log("%s()\n", __func__); + + crypto_aead_set_reqsize(aead, sizeof(struct iproc_reqctx_s)); + ctx->is_esp = false; + ctx->salt_len = 0; + ctx->salt_offset = 0; + + /* random first IV */ + get_random_bytes(ctx->iv, MAX_IV_SIZE); + flow_dump(" iv: ", ctx->iv, MAX_IV_SIZE); + + if (!err) { + if (alg->cra_flags & CRYPTO_ALG_NEED_FALLBACK) { + flow_log("%s() creating fallback cipher\n", __func__); + + ctx->fallback_cipher = + crypto_alloc_aead(alg->cra_name, 0, + CRYPTO_ALG_ASYNC | + CRYPTO_ALG_NEED_FALLBACK); + if (IS_ERR(ctx->fallback_cipher)) { + pr_err("%s() Error: failed to allocate fallback for %s\n", + __func__, alg->cra_name); + return PTR_ERR(ctx->fallback_cipher); + } + } + } + + return err; +} + +static void generic_cra_exit(struct crypto_tfm *tfm) +{ + atomic_dec(&iproc_priv.session_count); +} + +static void skcipher_exit_tfm(struct crypto_skcipher *tfm) +{ + generic_cra_exit(crypto_skcipher_tfm(tfm)); +} + +static void aead_cra_exit(struct crypto_aead *aead) +{ + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm); + + generic_cra_exit(tfm); + + if (ctx->fallback_cipher) { + crypto_free_aead(ctx->fallback_cipher); + ctx->fallback_cipher = NULL; + } +} + +/** + * spu_functions_register() - Specify hardware-specific SPU functions based on + * SPU type read from device tree. + * @dev: device structure + * @spu_type: SPU hardware generation + * @spu_subtype: SPU hardware version + */ +static void spu_functions_register(struct device *dev, + enum spu_spu_type spu_type, + enum spu_spu_subtype spu_subtype) +{ + struct spu_hw *spu = &iproc_priv.spu; + + if (spu_type == SPU_TYPE_SPUM) { + dev_dbg(dev, "Registering SPUM functions"); + spu->spu_dump_msg_hdr = spum_dump_msg_hdr; + spu->spu_payload_length = spum_payload_length; + spu->spu_response_hdr_len = spum_response_hdr_len; + spu->spu_hash_pad_len = spum_hash_pad_len; + spu->spu_gcm_ccm_pad_len = spum_gcm_ccm_pad_len; + spu->spu_assoc_resp_len = spum_assoc_resp_len; + spu->spu_aead_ivlen = spum_aead_ivlen; + spu->spu_hash_type = spum_hash_type; + spu->spu_digest_size = spum_digest_size; + spu->spu_create_request = spum_create_request; + spu->spu_cipher_req_init = spum_cipher_req_init; + spu->spu_cipher_req_finish = spum_cipher_req_finish; + spu->spu_request_pad = spum_request_pad; + spu->spu_tx_status_len = spum_tx_status_len; + spu->spu_rx_status_len = spum_rx_status_len; + spu->spu_status_process = spum_status_process; + spu->spu_xts_tweak_in_payload = spum_xts_tweak_in_payload; + spu->spu_ccm_update_iv = spum_ccm_update_iv; + spu->spu_wordalign_padlen = spum_wordalign_padlen; + if (spu_subtype == SPU_SUBTYPE_SPUM_NS2) + spu->spu_ctx_max_payload = spum_ns2_ctx_max_payload; + else + spu->spu_ctx_max_payload = spum_nsp_ctx_max_payload; + } else { + dev_dbg(dev, "Registering SPU2 functions"); + spu->spu_dump_msg_hdr = spu2_dump_msg_hdr; + spu->spu_ctx_max_payload = spu2_ctx_max_payload; + spu->spu_payload_length = spu2_payload_length; + spu->spu_response_hdr_len = spu2_response_hdr_len; + spu->spu_hash_pad_len = spu2_hash_pad_len; + spu->spu_gcm_ccm_pad_len = spu2_gcm_ccm_pad_len; + spu->spu_assoc_resp_len = spu2_assoc_resp_len; + spu->spu_aead_ivlen = spu2_aead_ivlen; + spu->spu_hash_type = spu2_hash_type; + spu->spu_digest_size = spu2_digest_size; + spu->spu_create_request = spu2_create_request; + spu->spu_cipher_req_init = spu2_cipher_req_init; + spu->spu_cipher_req_finish = spu2_cipher_req_finish; + spu->spu_request_pad = spu2_request_pad; + spu->spu_tx_status_len = spu2_tx_status_len; + spu->spu_rx_status_len = spu2_rx_status_len; + spu->spu_status_process = spu2_status_process; + spu->spu_xts_tweak_in_payload = spu2_xts_tweak_in_payload; + spu->spu_ccm_update_iv = spu2_ccm_update_iv; + spu->spu_wordalign_padlen = spu2_wordalign_padlen; + } +} + +/** + * spu_mb_init() - Initialize mailbox client. Request ownership of a mailbox + * channel for the SPU being probed. + * @dev: SPU driver device structure + * + * Return: 0 if successful + * < 0 otherwise + */ +static int spu_mb_init(struct device *dev) +{ + struct mbox_client *mcl = &iproc_priv.mcl; + int err, i; + + iproc_priv.mbox = devm_kcalloc(dev, iproc_priv.spu.num_chan, + sizeof(struct mbox_chan *), GFP_KERNEL); + if (!iproc_priv.mbox) + return -ENOMEM; + + mcl->dev = dev; + mcl->tx_block = false; + mcl->tx_tout = 0; + mcl->knows_txdone = true; + mcl->rx_callback = spu_rx_callback; + mcl->tx_done = NULL; + + for (i = 0; i < iproc_priv.spu.num_chan; i++) { + iproc_priv.mbox[i] = mbox_request_channel(mcl, i); + if (IS_ERR(iproc_priv.mbox[i])) { + err = PTR_ERR(iproc_priv.mbox[i]); + dev_err(dev, + "Mbox channel %d request failed with err %d", + i, err); + iproc_priv.mbox[i] = NULL; + goto free_channels; + } + } + + return 0; +free_channels: + for (i = 0; i < iproc_priv.spu.num_chan; i++) { + if (iproc_priv.mbox[i]) + mbox_free_channel(iproc_priv.mbox[i]); + } + + return err; +} + +static void spu_mb_release(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < iproc_priv.spu.num_chan; i++) + mbox_free_channel(iproc_priv.mbox[i]); +} + +static void spu_counters_init(void) +{ + int i; + int j; + + atomic_set(&iproc_priv.session_count, 0); + atomic_set(&iproc_priv.stream_count, 0); + atomic_set(&iproc_priv.next_chan, (int)iproc_priv.spu.num_chan); + atomic64_set(&iproc_priv.bytes_in, 0); + atomic64_set(&iproc_priv.bytes_out, 0); + for (i = 0; i < SPU_OP_NUM; i++) { + atomic_set(&iproc_priv.op_counts[i], 0); + atomic_set(&iproc_priv.setkey_cnt[i], 0); + } + for (i = 0; i < CIPHER_ALG_LAST; i++) + for (j = 0; j < CIPHER_MODE_LAST; j++) + atomic_set(&iproc_priv.cipher_cnt[i][j], 0); + + for (i = 0; i < HASH_ALG_LAST; i++) { + atomic_set(&iproc_priv.hash_cnt[i], 0); + atomic_set(&iproc_priv.hmac_cnt[i], 0); + } + for (i = 0; i < AEAD_TYPE_LAST; i++) + atomic_set(&iproc_priv.aead_cnt[i], 0); + + atomic_set(&iproc_priv.mb_no_spc, 0); + atomic_set(&iproc_priv.mb_send_fail, 0); + atomic_set(&iproc_priv.bad_icv, 0); +} + +static int spu_register_skcipher(struct iproc_alg_s *driver_alg) +{ + struct skcipher_alg *crypto = &driver_alg->alg.skcipher; + int err; + + crypto->base.cra_module = THIS_MODULE; + crypto->base.cra_priority = cipher_pri; + crypto->base.cra_alignmask = 0; + crypto->base.cra_ctxsize = sizeof(struct iproc_ctx_s); + crypto->base.cra_flags = CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY | + CRYPTO_ALG_KERN_DRIVER_ONLY; + + crypto->init = skcipher_init_tfm; + crypto->exit = skcipher_exit_tfm; + crypto->setkey = skcipher_setkey; + crypto->encrypt = skcipher_encrypt; + crypto->decrypt = skcipher_decrypt; + + err = crypto_register_skcipher(crypto); + /* Mark alg as having been registered, if successful */ + if (err == 0) + driver_alg->registered = true; + pr_debug(" registered skcipher %s\n", crypto->base.cra_driver_name); + return err; +} + +static int spu_register_ahash(struct iproc_alg_s *driver_alg) +{ + struct spu_hw *spu = &iproc_priv.spu; + struct ahash_alg *hash = &driver_alg->alg.hash; + int err; + + /* AES-XCBC is the only AES hash type currently supported on SPU-M */ + if ((driver_alg->auth_info.alg == HASH_ALG_AES) && + (driver_alg->auth_info.mode != HASH_MODE_XCBC) && + (spu->spu_type == SPU_TYPE_SPUM)) + return 0; + + /* SHA3 algorithm variants are not registered for SPU-M or SPU2. */ + if ((driver_alg->auth_info.alg >= HASH_ALG_SHA3_224) && + (spu->spu_subtype != SPU_SUBTYPE_SPU2_V2)) + return 0; + + hash->halg.base.cra_module = THIS_MODULE; + hash->halg.base.cra_priority = hash_pri; + hash->halg.base.cra_alignmask = 0; + hash->halg.base.cra_ctxsize = sizeof(struct iproc_ctx_s); + hash->halg.base.cra_init = ahash_cra_init; + hash->halg.base.cra_exit = generic_cra_exit; + hash->halg.base.cra_flags = CRYPTO_ALG_ASYNC | + CRYPTO_ALG_ALLOCATES_MEMORY; + hash->halg.statesize = sizeof(struct spu_hash_export_s); + + if (driver_alg->auth_info.mode != HASH_MODE_HMAC) { + hash->init = ahash_init; + hash->update = ahash_update; + hash->final = ahash_final; + hash->finup = ahash_finup; + hash->digest = ahash_digest; + if ((driver_alg->auth_info.alg == HASH_ALG_AES) && + ((driver_alg->auth_info.mode == HASH_MODE_XCBC) || + (driver_alg->auth_info.mode == HASH_MODE_CMAC))) { + hash->setkey = ahash_setkey; + } + } else { + hash->setkey = ahash_hmac_setkey; + hash->init = ahash_hmac_init; + hash->update = ahash_hmac_update; + hash->final = ahash_hmac_final; + hash->finup = ahash_hmac_finup; + hash->digest = ahash_hmac_digest; + } + hash->export = ahash_export; + hash->import = ahash_import; + + err = crypto_register_ahash(hash); + /* Mark alg as having been registered, if successful */ + if (err == 0) + driver_alg->registered = true; + pr_debug(" registered ahash %s\n", + hash->halg.base.cra_driver_name); + return err; +} + +static int spu_register_aead(struct iproc_alg_s *driver_alg) +{ + struct aead_alg *aead = &driver_alg->alg.aead; + int err; + + aead->base.cra_module = THIS_MODULE; + aead->base.cra_priority = aead_pri; + aead->base.cra_alignmask = 0; + aead->base.cra_ctxsize = sizeof(struct iproc_ctx_s); + + aead->base.cra_flags |= CRYPTO_ALG_ASYNC | CRYPTO_ALG_ALLOCATES_MEMORY; + /* setkey set in alg initialization */ + aead->setauthsize = aead_setauthsize; + aead->encrypt = aead_encrypt; + aead->decrypt = aead_decrypt; + aead->init = aead_cra_init; + aead->exit = aead_cra_exit; + + err = crypto_register_aead(aead); + /* Mark alg as having been registered, if successful */ + if (err == 0) + driver_alg->registered = true; + pr_debug(" registered aead %s\n", aead->base.cra_driver_name); + return err; +} + +/* register crypto algorithms the device supports */ +static int spu_algs_register(struct device *dev) +{ + int i, j; + int err; + + for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { + switch (driver_algs[i].type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + err = spu_register_skcipher(&driver_algs[i]); + break; + case CRYPTO_ALG_TYPE_AHASH: + err = spu_register_ahash(&driver_algs[i]); + break; + case CRYPTO_ALG_TYPE_AEAD: + err = spu_register_aead(&driver_algs[i]); + break; + default: + dev_err(dev, + "iproc-crypto: unknown alg type: %d", + driver_algs[i].type); + err = -EINVAL; + } + + if (err) { + dev_err(dev, "alg registration failed with error %d\n", + err); + goto err_algs; + } + } + + return 0; + +err_algs: + for (j = 0; j < i; j++) { + /* Skip any algorithm not registered */ + if (!driver_algs[j].registered) + continue; + switch (driver_algs[j].type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + crypto_unregister_skcipher(&driver_algs[j].alg.skcipher); + driver_algs[j].registered = false; + break; + case CRYPTO_ALG_TYPE_AHASH: + crypto_unregister_ahash(&driver_algs[j].alg.hash); + driver_algs[j].registered = false; + break; + case CRYPTO_ALG_TYPE_AEAD: + crypto_unregister_aead(&driver_algs[j].alg.aead); + driver_algs[j].registered = false; + break; + } + } + return err; +} + +/* ==================== Kernel Platform API ==================== */ + +static struct spu_type_subtype spum_ns2_types = { + SPU_TYPE_SPUM, SPU_SUBTYPE_SPUM_NS2 +}; + +static struct spu_type_subtype spum_nsp_types = { + SPU_TYPE_SPUM, SPU_SUBTYPE_SPUM_NSP +}; + +static struct spu_type_subtype spu2_types = { + SPU_TYPE_SPU2, SPU_SUBTYPE_SPU2_V1 +}; + +static struct spu_type_subtype spu2_v2_types = { + SPU_TYPE_SPU2, SPU_SUBTYPE_SPU2_V2 +}; + +static const struct of_device_id bcm_spu_dt_ids[] = { + { + .compatible = "brcm,spum-crypto", + .data = &spum_ns2_types, + }, + { + .compatible = "brcm,spum-nsp-crypto", + .data = &spum_nsp_types, + }, + { + .compatible = "brcm,spu2-crypto", + .data = &spu2_types, + }, + { + .compatible = "brcm,spu2-v2-crypto", + .data = &spu2_v2_types, + }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, bcm_spu_dt_ids); + +static int spu_dt_read(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spu_hw *spu = &iproc_priv.spu; + struct resource *spu_ctrl_regs; + const struct spu_type_subtype *matched_spu_type; + struct device_node *dn = pdev->dev.of_node; + int err, i; + + /* Count number of mailbox channels */ + spu->num_chan = of_count_phandle_with_args(dn, "mboxes", "#mbox-cells"); + + matched_spu_type = of_device_get_match_data(dev); + if (!matched_spu_type) { + dev_err(dev, "Failed to match device\n"); + return -ENODEV; + } + + spu->spu_type = matched_spu_type->type; + spu->spu_subtype = matched_spu_type->subtype; + + for (i = 0; (i < MAX_SPUS) && ((spu_ctrl_regs = + platform_get_resource(pdev, IORESOURCE_MEM, i)) != NULL); i++) { + + spu->reg_vbase[i] = devm_ioremap_resource(dev, spu_ctrl_regs); + if (IS_ERR(spu->reg_vbase[i])) { + err = PTR_ERR(spu->reg_vbase[i]); + dev_err(dev, "Failed to map registers: %d\n", + err); + spu->reg_vbase[i] = NULL; + return err; + } + } + spu->num_spu = i; + dev_dbg(dev, "Device has %d SPUs", spu->num_spu); + + return 0; +} + +static int bcm_spu_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spu_hw *spu = &iproc_priv.spu; + int err; + + iproc_priv.pdev = pdev; + platform_set_drvdata(iproc_priv.pdev, + &iproc_priv); + + err = spu_dt_read(pdev); + if (err < 0) + goto failure; + + err = spu_mb_init(dev); + if (err < 0) + goto failure; + + if (spu->spu_type == SPU_TYPE_SPUM) + iproc_priv.bcm_hdr_len = 8; + else if (spu->spu_type == SPU_TYPE_SPU2) + iproc_priv.bcm_hdr_len = 0; + + spu_functions_register(dev, spu->spu_type, spu->spu_subtype); + + spu_counters_init(); + + spu_setup_debugfs(); + + err = spu_algs_register(dev); + if (err < 0) + goto fail_reg; + + return 0; + +fail_reg: + spu_free_debugfs(); +failure: + spu_mb_release(pdev); + dev_err(dev, "%s failed with error %d.\n", __func__, err); + + return err; +} + +static int bcm_spu_remove(struct platform_device *pdev) +{ + int i; + struct device *dev = &pdev->dev; + char *cdn; + + for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { + /* + * Not all algorithms were registered, depending on whether + * hardware is SPU or SPU2. So here we make sure to skip + * those algorithms that were not previously registered. + */ + if (!driver_algs[i].registered) + continue; + + switch (driver_algs[i].type) { + case CRYPTO_ALG_TYPE_SKCIPHER: + crypto_unregister_skcipher(&driver_algs[i].alg.skcipher); + dev_dbg(dev, " unregistered cipher %s\n", + driver_algs[i].alg.skcipher.base.cra_driver_name); + driver_algs[i].registered = false; + break; + case CRYPTO_ALG_TYPE_AHASH: + crypto_unregister_ahash(&driver_algs[i].alg.hash); + cdn = driver_algs[i].alg.hash.halg.base.cra_driver_name; + dev_dbg(dev, " unregistered hash %s\n", cdn); + driver_algs[i].registered = false; + break; + case CRYPTO_ALG_TYPE_AEAD: + crypto_unregister_aead(&driver_algs[i].alg.aead); + dev_dbg(dev, " unregistered aead %s\n", + driver_algs[i].alg.aead.base.cra_driver_name); + driver_algs[i].registered = false; + break; + } + } + spu_free_debugfs(); + spu_mb_release(pdev); + return 0; +} + +/* ===== Kernel Module API ===== */ + +static struct platform_driver bcm_spu_pdriver = { + .driver = { + .name = "brcm-spu-crypto", + .of_match_table = of_match_ptr(bcm_spu_dt_ids), + }, + .probe = bcm_spu_probe, + .remove = bcm_spu_remove, +}; +module_platform_driver(bcm_spu_pdriver); + +MODULE_AUTHOR("Rob Rice <rob.rice@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom symmetric crypto offload driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/crypto/bcm/cipher.h b/drivers/crypto/bcm/cipher.h new file mode 100644 index 000000000..d6d873321 --- /dev/null +++ b/drivers/crypto/bcm/cipher.h @@ -0,0 +1,472 @@ + +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2016 Broadcom + */ + +#ifndef _CIPHER_H +#define _CIPHER_H + +#include <linux/atomic.h> +#include <linux/mailbox/brcm-message.h> +#include <linux/mailbox_client.h> +#include <crypto/aes.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/skcipher.h> +#include <crypto/aead.h> +#include <crypto/arc4.h> +#include <crypto/gcm.h> +#include <crypto/sha1.h> +#include <crypto/sha2.h> +#include <crypto/sha3.h> + +#include "spu.h" +#include "spum.h" +#include "spu2.h" + +/* Driver supports up to MAX_SPUS SPU blocks */ +#define MAX_SPUS 16 + +#define ARC4_STATE_SIZE 4 + +#define CCM_AES_IV_SIZE 16 +#define CCM_ESP_IV_SIZE 8 +#define RFC4543_ICV_SIZE 16 + +#define MAX_KEY_SIZE ARC4_MAX_KEY_SIZE +#define MAX_IV_SIZE AES_BLOCK_SIZE +#define MAX_DIGEST_SIZE SHA3_512_DIGEST_SIZE +#define MAX_ASSOC_SIZE 512 + +/* size of salt value for AES-GCM-ESP and AES-CCM-ESP */ +#define GCM_ESP_SALT_SIZE 4 +#define CCM_ESP_SALT_SIZE 3 +#define MAX_SALT_SIZE GCM_ESP_SALT_SIZE +#define GCM_ESP_SALT_OFFSET 0 +#define CCM_ESP_SALT_OFFSET 1 + +#define GCM_ESP_DIGESTSIZE 16 + +#define MAX_HASH_BLOCK_SIZE SHA512_BLOCK_SIZE + +/* + * Maximum number of bytes from a non-final hash request that can be deferred + * until more data is available. With new crypto API framework, this + * can be no more than one block of data. + */ +#define HASH_CARRY_MAX MAX_HASH_BLOCK_SIZE + +/* Force at least 4-byte alignment of all SPU message fields */ +#define SPU_MSG_ALIGN 4 + +/* Number of times to resend mailbox message if mb queue is full */ +#define SPU_MB_RETRY_MAX 1000 + +/* op_counts[] indexes */ +enum op_type { + SPU_OP_CIPHER, + SPU_OP_HASH, + SPU_OP_HMAC, + SPU_OP_AEAD, + SPU_OP_NUM +}; + +enum spu_spu_type { + SPU_TYPE_SPUM, + SPU_TYPE_SPU2, +}; + +/* + * SPUM_NS2 and SPUM_NSP are the SPU-M block on Northstar 2 and Northstar Plus, + * respectively. + */ +enum spu_spu_subtype { + SPU_SUBTYPE_SPUM_NS2, + SPU_SUBTYPE_SPUM_NSP, + SPU_SUBTYPE_SPU2_V1, + SPU_SUBTYPE_SPU2_V2 +}; + +struct spu_type_subtype { + enum spu_spu_type type; + enum spu_spu_subtype subtype; +}; + +struct cipher_op { + enum spu_cipher_alg alg; + enum spu_cipher_mode mode; +}; + +struct auth_op { + enum hash_alg alg; + enum hash_mode mode; +}; + +struct iproc_alg_s { + u32 type; + union { + struct skcipher_alg skcipher; + struct ahash_alg hash; + struct aead_alg aead; + } alg; + struct cipher_op cipher_info; + struct auth_op auth_info; + bool auth_first; + bool registered; +}; + +/* + * Buffers for a SPU request/reply message pair. All part of one structure to + * allow a single alloc per request. + */ +struct spu_msg_buf { + /* Request message fragments */ + + /* + * SPU request message header. For SPU-M, holds MH, EMH, SCTX, BDESC, + * and BD header. For SPU2, holds FMD, OMD. + */ + u8 bcm_spu_req_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; + + /* IV or counter. Size to include salt. Also used for XTS tweek. */ + u8 iv_ctr[ALIGN(2 * AES_BLOCK_SIZE, SPU_MSG_ALIGN)]; + + /* Hash digest. request and response. */ + u8 digest[ALIGN(MAX_DIGEST_SIZE, SPU_MSG_ALIGN)]; + + /* SPU request message padding */ + u8 spu_req_pad[ALIGN(SPU_PAD_LEN_MAX, SPU_MSG_ALIGN)]; + + /* SPU-M request message STATUS field */ + u8 tx_stat[ALIGN(SPU_TX_STATUS_LEN, SPU_MSG_ALIGN)]; + + /* Response message fragments */ + + /* SPU response message header */ + u8 spu_resp_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; + + /* SPU response message STATUS field padding */ + u8 rx_stat_pad[ALIGN(SPU_STAT_PAD_MAX, SPU_MSG_ALIGN)]; + + /* SPU response message STATUS field */ + u8 rx_stat[ALIGN(SPU_RX_STATUS_LEN, SPU_MSG_ALIGN)]; + + union { + /* Buffers only used for skcipher */ + struct { + /* + * Field used for either SUPDT when RC4 is used + * -OR- tweak value when XTS/AES is used + */ + u8 supdt_tweak[ALIGN(SPU_SUPDT_LEN, SPU_MSG_ALIGN)]; + } c; + + /* Buffers only used for aead */ + struct { + /* SPU response pad for GCM data */ + u8 gcmpad[ALIGN(AES_BLOCK_SIZE, SPU_MSG_ALIGN)]; + + /* SPU request msg padding for GCM AAD */ + u8 req_aad_pad[ALIGN(SPU_PAD_LEN_MAX, SPU_MSG_ALIGN)]; + + /* SPU response data to be discarded */ + u8 resp_aad[ALIGN(MAX_ASSOC_SIZE + MAX_IV_SIZE, + SPU_MSG_ALIGN)]; + } a; + }; +}; + +struct iproc_ctx_s { + u8 enckey[MAX_KEY_SIZE + ARC4_STATE_SIZE]; + unsigned int enckeylen; + + u8 authkey[MAX_KEY_SIZE + ARC4_STATE_SIZE]; + unsigned int authkeylen; + + u8 salt[MAX_SALT_SIZE]; + unsigned int salt_len; + unsigned int salt_offset; + u8 iv[MAX_IV_SIZE]; + + unsigned int digestsize; + + struct iproc_alg_s *alg; + bool is_esp; + + struct cipher_op cipher; + enum spu_cipher_type cipher_type; + + struct auth_op auth; + bool auth_first; + + /* + * The maximum length in bytes of the payload in a SPU message for this + * context. For SPU-M, the payload is the combination of AAD and data. + * For SPU2, the payload is just data. A value of SPU_MAX_PAYLOAD_INF + * indicates that there is no limit to the length of the SPU message + * payload. + */ + unsigned int max_payload; + + struct crypto_aead *fallback_cipher; + + /* auth_type is determined during processing of request */ + + u8 ipad[MAX_HASH_BLOCK_SIZE]; + u8 opad[MAX_HASH_BLOCK_SIZE]; + + /* + * Buffer to hold SPU message header template. Template is created at + * setkey time for skcipher requests, since most of the fields in the + * header are known at that time. At request time, just fill in a few + * missing pieces related to length of data in the request and IVs, etc. + */ + u8 bcm_spu_req_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; + + /* Length of SPU request header */ + u16 spu_req_hdr_len; + + /* Expected length of SPU response header */ + u16 spu_resp_hdr_len; + + /* + * shash descriptor - needed to perform incremental hashing in + * software, when hw doesn't support it. + */ + struct shash_desc *shash; + + bool is_rfc4543; /* RFC 4543 style of GMAC */ +}; + +/* state from iproc_reqctx_s necessary for hash state export/import */ +struct spu_hash_export_s { + unsigned int total_todo; + unsigned int total_sent; + u8 hash_carry[HASH_CARRY_MAX]; + unsigned int hash_carry_len; + u8 incr_hash[MAX_DIGEST_SIZE]; + bool is_sw_hmac; +}; + +struct iproc_reqctx_s { + /* general context */ + struct crypto_async_request *parent; + + /* only valid after enqueue() */ + struct iproc_ctx_s *ctx; + + u8 chan_idx; /* Mailbox channel to be used to submit this request */ + + /* total todo, rx'd, and sent for this request */ + unsigned int total_todo; + unsigned int total_received; /* only valid for skcipher */ + unsigned int total_sent; + + /* + * num bytes sent to hw from the src sg in this request. This can differ + * from total_sent for incremental hashing. total_sent includes previous + * init() and update() data. src_sent does not. + */ + unsigned int src_sent; + + /* + * For AEAD requests, start of associated data. This will typically + * point to the beginning of the src scatterlist from the request, + * since assoc data is at the beginning of the src scatterlist rather + * than in its own sg. + */ + struct scatterlist *assoc; + + /* + * scatterlist entry and offset to start of data for next chunk. Crypto + * API src scatterlist for AEAD starts with AAD, if present. For first + * chunk, src_sg is sg entry at beginning of input data (after AAD). + * src_skip begins at the offset in that sg entry where data begins. + */ + struct scatterlist *src_sg; + int src_nents; /* Number of src entries with data */ + u32 src_skip; /* bytes of current sg entry already used */ + + /* + * Same for destination. For AEAD, if there is AAD, output data must + * be written at offset following AAD. + */ + struct scatterlist *dst_sg; + int dst_nents; /* Number of dst entries with data */ + u32 dst_skip; /* bytes of current sg entry already written */ + + /* Mailbox message used to send this request to PDC driver */ + struct brcm_message mb_mssg; + + bool bd_suppress; /* suppress BD field in SPU response? */ + + /* cipher context */ + bool is_encrypt; + + /* + * CBC mode: IV. CTR mode: counter. Else empty. Used as a DMA + * buffer for AEAD requests. So allocate as DMAable memory. If IV + * concatenated with salt, includes the salt. + */ + u8 *iv_ctr; + /* Length of IV or counter, in bytes */ + unsigned int iv_ctr_len; + + /* + * Hash requests can be of any size, whether initial, update, or final. + * A non-final request must be submitted to the SPU as an integral + * number of blocks. This may leave data at the end of the request + * that is not a full block. Since the request is non-final, it cannot + * be padded. So, we write the remainder to this hash_carry buffer and + * hold it until the next request arrives. The carry data is then + * submitted at the beginning of the data in the next SPU msg. + * hash_carry_len is the number of bytes currently in hash_carry. These + * fields are only used for ahash requests. + */ + u8 hash_carry[HASH_CARRY_MAX]; + unsigned int hash_carry_len; + unsigned int is_final; /* is this the final for the hash op? */ + + /* + * Digest from incremental hash is saved here to include in next hash + * operation. Cannot be stored in req->result for truncated hashes, + * since result may be sized for final digest. Cannot be saved in + * msg_buf because that gets deleted between incremental hash ops + * and is not saved as part of export(). + */ + u8 incr_hash[MAX_DIGEST_SIZE]; + + /* hmac context */ + bool is_sw_hmac; + + /* aead context */ + struct crypto_tfm *old_tfm; + crypto_completion_t old_complete; + void *old_data; + + gfp_t gfp; + + /* Buffers used to build SPU request and response messages */ + struct spu_msg_buf msg_buf; +}; + +/* + * Structure encapsulates a set of function pointers specific to the type of + * SPU hardware running. These functions handling creation and parsing of + * SPU request messages and SPU response messages. Includes hardware-specific + * values read from device tree. + */ +struct spu_hw { + void (*spu_dump_msg_hdr)(u8 *buf, unsigned int buf_len); + u32 (*spu_ctx_max_payload)(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize); + u32 (*spu_payload_length)(u8 *spu_hdr); + u16 (*spu_response_hdr_len)(u16 auth_key_len, u16 enc_key_len, + bool is_hash); + u16 (*spu_hash_pad_len)(enum hash_alg hash_alg, + enum hash_mode hash_mode, u32 chunksize, + u16 hash_block_size); + u32 (*spu_gcm_ccm_pad_len)(enum spu_cipher_mode cipher_mode, + unsigned int data_size); + u32 (*spu_assoc_resp_len)(enum spu_cipher_mode cipher_mode, + unsigned int assoc_len, + unsigned int iv_len, bool is_encrypt); + u8 (*spu_aead_ivlen)(enum spu_cipher_mode cipher_mode, + u16 iv_len); + enum hash_type (*spu_hash_type)(u32 src_sent); + u32 (*spu_digest_size)(u32 digest_size, enum hash_alg alg, + enum hash_type); + u32 (*spu_create_request)(u8 *spu_hdr, + struct spu_request_opts *req_opts, + struct spu_cipher_parms *cipher_parms, + struct spu_hash_parms *hash_parms, + struct spu_aead_parms *aead_parms, + unsigned int data_size); + u16 (*spu_cipher_req_init)(u8 *spu_hdr, + struct spu_cipher_parms *cipher_parms); + void (*spu_cipher_req_finish)(u8 *spu_hdr, + u16 spu_req_hdr_len, + unsigned int is_inbound, + struct spu_cipher_parms *cipher_parms, + unsigned int data_size); + void (*spu_request_pad)(u8 *pad_start, u32 gcm_padding, + u32 hash_pad_len, enum hash_alg auth_alg, + enum hash_mode auth_mode, + unsigned int total_sent, u32 status_padding); + u8 (*spu_xts_tweak_in_payload)(void); + u8 (*spu_tx_status_len)(void); + u8 (*spu_rx_status_len)(void); + int (*spu_status_process)(u8 *statp); + void (*spu_ccm_update_iv)(unsigned int digestsize, + struct spu_cipher_parms *cipher_parms, + unsigned int assoclen, unsigned int chunksize, + bool is_encrypt, bool is_esp); + u32 (*spu_wordalign_padlen)(u32 data_size); + + /* The base virtual address of the SPU hw registers */ + void __iomem *reg_vbase[MAX_SPUS]; + + /* Version of the SPU hardware */ + enum spu_spu_type spu_type; + + /* Sub-version of the SPU hardware */ + enum spu_spu_subtype spu_subtype; + + /* The number of SPUs on this platform */ + u32 num_spu; + + /* The number of SPU channels on this platform */ + u32 num_chan; +}; + +struct bcm_device_private { + struct platform_device *pdev; + + struct spu_hw spu; + + atomic_t session_count; /* number of streams active */ + atomic_t stream_count; /* monotonic counter for streamID's */ + + /* Length of BCM header. Set to 0 when hw does not expect BCM HEADER. */ + u8 bcm_hdr_len; + + /* The index of the channel to use for the next crypto request */ + atomic_t next_chan; + + struct dentry *debugfs_dir; + struct dentry *debugfs_stats; + + /* Number of request bytes processed and result bytes returned */ + atomic64_t bytes_in; + atomic64_t bytes_out; + + /* Number of operations of each type */ + atomic_t op_counts[SPU_OP_NUM]; + + atomic_t cipher_cnt[CIPHER_ALG_LAST][CIPHER_MODE_LAST]; + atomic_t hash_cnt[HASH_ALG_LAST]; + atomic_t hmac_cnt[HASH_ALG_LAST]; + atomic_t aead_cnt[AEAD_TYPE_LAST]; + + /* Number of calls to setkey() for each operation type */ + atomic_t setkey_cnt[SPU_OP_NUM]; + + /* Number of times request was resubmitted because mb was full */ + atomic_t mb_no_spc; + + /* Number of mailbox send failures */ + atomic_t mb_send_fail; + + /* Number of ICV check failures for AEAD messages */ + atomic_t bad_icv; + + struct mbox_client mcl; + + /* Array of mailbox channel pointers, one for each channel */ + struct mbox_chan **mbox; +}; + +extern struct bcm_device_private iproc_priv; + +#endif diff --git a/drivers/crypto/bcm/spu.c b/drivers/crypto/bcm/spu.c new file mode 100644 index 000000000..6283e8c6d --- /dev/null +++ b/drivers/crypto/bcm/spu.c @@ -0,0 +1,1214 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 Broadcom + */ + +#include <linux/kernel.h> +#include <linux/string.h> + +#include "util.h" +#include "spu.h" +#include "spum.h" +#include "cipher.h" + +char *hash_alg_name[] = { "None", "md5", "sha1", "sha224", "sha256", "aes", + "sha384", "sha512", "sha3_224", "sha3_256", "sha3_384", "sha3_512" }; + +char *aead_alg_name[] = { "ccm(aes)", "gcm(aes)", "authenc" }; + +/* Assumes SPU-M messages are in big endian */ +void spum_dump_msg_hdr(u8 *buf, unsigned int buf_len) +{ + u8 *ptr = buf; + struct SPUHEADER *spuh = (struct SPUHEADER *)buf; + unsigned int hash_key_len = 0; + unsigned int hash_state_len = 0; + unsigned int cipher_key_len = 0; + unsigned int iv_len; + u32 pflags; + u32 cflags; + u32 ecf; + u32 cipher_alg; + u32 cipher_mode; + u32 cipher_type; + u32 hash_alg; + u32 hash_mode; + u32 hash_type; + u32 sctx_size; /* SCTX length in words */ + u32 sctx_pl_len; /* SCTX payload length in bytes */ + + packet_log("\n"); + packet_log("SPU Message header %p len: %u\n", buf, buf_len); + + /* ========== Decode MH ========== */ + packet_log(" MH 0x%08x\n", be32_to_cpup((__be32 *)ptr)); + if (spuh->mh.flags & MH_SCTX_PRES) + packet_log(" SCTX present\n"); + if (spuh->mh.flags & MH_BDESC_PRES) + packet_log(" BDESC present\n"); + if (spuh->mh.flags & MH_MFM_PRES) + packet_log(" MFM present\n"); + if (spuh->mh.flags & MH_BD_PRES) + packet_log(" BD present\n"); + if (spuh->mh.flags & MH_HASH_PRES) + packet_log(" HASH present\n"); + if (spuh->mh.flags & MH_SUPDT_PRES) + packet_log(" SUPDT present\n"); + packet_log(" Opcode 0x%02x\n", spuh->mh.op_code); + + ptr += sizeof(spuh->mh) + sizeof(spuh->emh); /* skip emh. unused */ + + /* ========== Decode SCTX ========== */ + if (spuh->mh.flags & MH_SCTX_PRES) { + pflags = be32_to_cpu(spuh->sa.proto_flags); + packet_log(" SCTX[0] 0x%08x\n", pflags); + sctx_size = pflags & SCTX_SIZE; + packet_log(" Size %u words\n", sctx_size); + + cflags = be32_to_cpu(spuh->sa.cipher_flags); + packet_log(" SCTX[1] 0x%08x\n", cflags); + packet_log(" Inbound:%lu (1:decrypt/vrfy 0:encrypt/auth)\n", + (cflags & CIPHER_INBOUND) >> CIPHER_INBOUND_SHIFT); + packet_log(" Order:%lu (1:AuthFirst 0:EncFirst)\n", + (cflags & CIPHER_ORDER) >> CIPHER_ORDER_SHIFT); + packet_log(" ICV_IS_512:%lx\n", + (cflags & ICV_IS_512) >> ICV_IS_512_SHIFT); + cipher_alg = (cflags & CIPHER_ALG) >> CIPHER_ALG_SHIFT; + cipher_mode = (cflags & CIPHER_MODE) >> CIPHER_MODE_SHIFT; + cipher_type = (cflags & CIPHER_TYPE) >> CIPHER_TYPE_SHIFT; + packet_log(" Crypto Alg:%u Mode:%u Type:%u\n", + cipher_alg, cipher_mode, cipher_type); + hash_alg = (cflags & HASH_ALG) >> HASH_ALG_SHIFT; + hash_mode = (cflags & HASH_MODE) >> HASH_MODE_SHIFT; + hash_type = (cflags & HASH_TYPE) >> HASH_TYPE_SHIFT; + packet_log(" Hash Alg:%x Mode:%x Type:%x\n", + hash_alg, hash_mode, hash_type); + packet_log(" UPDT_Offset:%u\n", cflags & UPDT_OFST); + + ecf = be32_to_cpu(spuh->sa.ecf); + packet_log(" SCTX[2] 0x%08x\n", ecf); + packet_log(" WriteICV:%lu CheckICV:%lu ICV_SIZE:%u ", + (ecf & INSERT_ICV) >> INSERT_ICV_SHIFT, + (ecf & CHECK_ICV) >> CHECK_ICV_SHIFT, + (ecf & ICV_SIZE) >> ICV_SIZE_SHIFT); + packet_log("BD_SUPPRESS:%lu\n", + (ecf & BD_SUPPRESS) >> BD_SUPPRESS_SHIFT); + packet_log(" SCTX_IV:%lu ExplicitIV:%lu GenIV:%lu ", + (ecf & SCTX_IV) >> SCTX_IV_SHIFT, + (ecf & EXPLICIT_IV) >> EXPLICIT_IV_SHIFT, + (ecf & GEN_IV) >> GEN_IV_SHIFT); + packet_log("IV_OV_OFST:%lu EXP_IV_SIZE:%u\n", + (ecf & IV_OFFSET) >> IV_OFFSET_SHIFT, + ecf & EXP_IV_SIZE); + + ptr += sizeof(struct SCTX); + + if (hash_alg && hash_mode) { + char *name = "NONE"; + + switch (hash_alg) { + case HASH_ALG_MD5: + hash_key_len = 16; + name = "MD5"; + break; + case HASH_ALG_SHA1: + hash_key_len = 20; + name = "SHA1"; + break; + case HASH_ALG_SHA224: + hash_key_len = 28; + name = "SHA224"; + break; + case HASH_ALG_SHA256: + hash_key_len = 32; + name = "SHA256"; + break; + case HASH_ALG_SHA384: + hash_key_len = 48; + name = "SHA384"; + break; + case HASH_ALG_SHA512: + hash_key_len = 64; + name = "SHA512"; + break; + case HASH_ALG_AES: + hash_key_len = 0; + name = "AES"; + break; + case HASH_ALG_NONE: + break; + } + + packet_log(" Auth Key Type:%s Length:%u Bytes\n", + name, hash_key_len); + packet_dump(" KEY: ", ptr, hash_key_len); + ptr += hash_key_len; + } else if ((hash_alg == HASH_ALG_AES) && + (hash_mode == HASH_MODE_XCBC)) { + char *name = "NONE"; + + switch (cipher_type) { + case CIPHER_TYPE_AES128: + hash_key_len = 16; + name = "AES128-XCBC"; + break; + case CIPHER_TYPE_AES192: + hash_key_len = 24; + name = "AES192-XCBC"; + break; + case CIPHER_TYPE_AES256: + hash_key_len = 32; + name = "AES256-XCBC"; + break; + } + packet_log(" Auth Key Type:%s Length:%u Bytes\n", + name, hash_key_len); + packet_dump(" KEY: ", ptr, hash_key_len); + ptr += hash_key_len; + } + + if (hash_alg && (hash_mode == HASH_MODE_NONE) && + (hash_type == HASH_TYPE_UPDT)) { + char *name = "NONE"; + + switch (hash_alg) { + case HASH_ALG_MD5: + hash_state_len = 16; + name = "MD5"; + break; + case HASH_ALG_SHA1: + hash_state_len = 20; + name = "SHA1"; + break; + case HASH_ALG_SHA224: + hash_state_len = 32; + name = "SHA224"; + break; + case HASH_ALG_SHA256: + hash_state_len = 32; + name = "SHA256"; + break; + case HASH_ALG_SHA384: + hash_state_len = 48; + name = "SHA384"; + break; + case HASH_ALG_SHA512: + hash_state_len = 64; + name = "SHA512"; + break; + case HASH_ALG_AES: + hash_state_len = 0; + name = "AES"; + break; + case HASH_ALG_NONE: + break; + } + + packet_log(" Auth State Type:%s Length:%u Bytes\n", + name, hash_state_len); + packet_dump(" State: ", ptr, hash_state_len); + ptr += hash_state_len; + } + + if (cipher_alg) { + char *name = "NONE"; + + switch (cipher_alg) { + case CIPHER_ALG_DES: + cipher_key_len = 8; + name = "DES"; + break; + case CIPHER_ALG_3DES: + cipher_key_len = 24; + name = "3DES"; + break; + case CIPHER_ALG_AES: + switch (cipher_type) { + case CIPHER_TYPE_AES128: + cipher_key_len = 16; + name = "AES128"; + break; + case CIPHER_TYPE_AES192: + cipher_key_len = 24; + name = "AES192"; + break; + case CIPHER_TYPE_AES256: + cipher_key_len = 32; + name = "AES256"; + break; + } + break; + case CIPHER_ALG_NONE: + break; + } + + packet_log(" Cipher Key Type:%s Length:%u Bytes\n", + name, cipher_key_len); + + /* XTS has two keys */ + if (cipher_mode == CIPHER_MODE_XTS) { + packet_dump(" KEY2: ", ptr, cipher_key_len); + ptr += cipher_key_len; + packet_dump(" KEY1: ", ptr, cipher_key_len); + ptr += cipher_key_len; + + cipher_key_len *= 2; + } else { + packet_dump(" KEY: ", ptr, cipher_key_len); + ptr += cipher_key_len; + } + + if (ecf & SCTX_IV) { + sctx_pl_len = sctx_size * sizeof(u32) - + sizeof(struct SCTX); + iv_len = sctx_pl_len - + (hash_key_len + hash_state_len + + cipher_key_len); + packet_log(" IV Length:%u Bytes\n", iv_len); + packet_dump(" IV: ", ptr, iv_len); + ptr += iv_len; + } + } + } + + /* ========== Decode BDESC ========== */ + if (spuh->mh.flags & MH_BDESC_PRES) { + struct BDESC_HEADER *bdesc = (struct BDESC_HEADER *)ptr; + + packet_log(" BDESC[0] 0x%08x\n", be32_to_cpup((__be32 *)ptr)); + packet_log(" OffsetMAC:%u LengthMAC:%u\n", + be16_to_cpu(bdesc->offset_mac), + be16_to_cpu(bdesc->length_mac)); + ptr += sizeof(u32); + + packet_log(" BDESC[1] 0x%08x\n", be32_to_cpup((__be32 *)ptr)); + packet_log(" OffsetCrypto:%u LengthCrypto:%u\n", + be16_to_cpu(bdesc->offset_crypto), + be16_to_cpu(bdesc->length_crypto)); + ptr += sizeof(u32); + + packet_log(" BDESC[2] 0x%08x\n", be32_to_cpup((__be32 *)ptr)); + packet_log(" OffsetICV:%u OffsetIV:%u\n", + be16_to_cpu(bdesc->offset_icv), + be16_to_cpu(bdesc->offset_iv)); + ptr += sizeof(u32); + } + + /* ========== Decode BD ========== */ + if (spuh->mh.flags & MH_BD_PRES) { + struct BD_HEADER *bd = (struct BD_HEADER *)ptr; + + packet_log(" BD[0] 0x%08x\n", be32_to_cpup((__be32 *)ptr)); + packet_log(" Size:%ubytes PrevLength:%u\n", + be16_to_cpu(bd->size), be16_to_cpu(bd->prev_length)); + ptr += 4; + } + + /* Double check sanity */ + if (buf + buf_len != ptr) { + packet_log(" Packet parsed incorrectly. "); + packet_log("buf:%p buf_len:%u buf+buf_len:%p ptr:%p\n", + buf, buf_len, buf + buf_len, ptr); + } + + packet_log("\n"); +} + +/** + * spum_ns2_ctx_max_payload() - Determine the max length of the payload for a + * SPU message for a given cipher and hash alg context. + * @cipher_alg: The cipher algorithm + * @cipher_mode: The cipher mode + * @blocksize: The size of a block of data for this algo + * + * The max payload must be a multiple of the blocksize so that if a request is + * too large to fit in a single SPU message, the request can be broken into + * max_payload sized chunks. Each chunk must be a multiple of blocksize. + * + * Return: Max payload length in bytes + */ +u32 spum_ns2_ctx_max_payload(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize) +{ + u32 max_payload = SPUM_NS2_MAX_PAYLOAD; + u32 excess; + + /* In XTS on SPU-M, we'll need to insert tweak before input data */ + if (cipher_mode == CIPHER_MODE_XTS) + max_payload -= SPU_XTS_TWEAK_SIZE; + + excess = max_payload % blocksize; + + return max_payload - excess; +} + +/** + * spum_nsp_ctx_max_payload() - Determine the max length of the payload for a + * SPU message for a given cipher and hash alg context. + * @cipher_alg: The cipher algorithm + * @cipher_mode: The cipher mode + * @blocksize: The size of a block of data for this algo + * + * The max payload must be a multiple of the blocksize so that if a request is + * too large to fit in a single SPU message, the request can be broken into + * max_payload sized chunks. Each chunk must be a multiple of blocksize. + * + * Return: Max payload length in bytes + */ +u32 spum_nsp_ctx_max_payload(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize) +{ + u32 max_payload = SPUM_NSP_MAX_PAYLOAD; + u32 excess; + + /* In XTS on SPU-M, we'll need to insert tweak before input data */ + if (cipher_mode == CIPHER_MODE_XTS) + max_payload -= SPU_XTS_TWEAK_SIZE; + + excess = max_payload % blocksize; + + return max_payload - excess; +} + +/** spum_payload_length() - Given a SPU-M message header, extract the payload + * length. + * @spu_hdr: Start of SPU header + * + * Assumes just MH, EMH, BD (no SCTX, BDESC. Works for response frames. + * + * Return: payload length in bytes + */ +u32 spum_payload_length(u8 *spu_hdr) +{ + struct BD_HEADER *bd; + u32 pl_len; + + /* Find BD header. skip MH, EMH */ + bd = (struct BD_HEADER *)(spu_hdr + 8); + pl_len = be16_to_cpu(bd->size); + + return pl_len; +} + +/** + * spum_response_hdr_len() - Given the length of the hash key and encryption + * key, determine the expected length of a SPU response header. + * @auth_key_len: authentication key length (bytes) + * @enc_key_len: encryption key length (bytes) + * @is_hash: true if response message is for a hash operation + * + * Return: length of SPU response header (bytes) + */ +u16 spum_response_hdr_len(u16 auth_key_len, u16 enc_key_len, bool is_hash) +{ + if (is_hash) + return SPU_HASH_RESP_HDR_LEN; + else + return SPU_RESP_HDR_LEN; +} + +/** + * spum_hash_pad_len() - Calculate the length of hash padding required to extend + * data to a full block size. + * @hash_alg: hash algorithm + * @hash_mode: hash mode + * @chunksize: length of data, in bytes + * @hash_block_size: size of a block of data for hash algorithm + * + * Reserve space for 1 byte (0x80) start of pad and the total length as u64 + * + * Return: length of hash pad in bytes + */ +u16 spum_hash_pad_len(enum hash_alg hash_alg, enum hash_mode hash_mode, + u32 chunksize, u16 hash_block_size) +{ + unsigned int length_len; + unsigned int used_space_last_block; + int hash_pad_len; + + /* AES-XCBC hash requires just padding to next block boundary */ + if ((hash_alg == HASH_ALG_AES) && (hash_mode == HASH_MODE_XCBC)) { + used_space_last_block = chunksize % hash_block_size; + hash_pad_len = hash_block_size - used_space_last_block; + if (hash_pad_len >= hash_block_size) + hash_pad_len -= hash_block_size; + return hash_pad_len; + } + + used_space_last_block = chunksize % hash_block_size + 1; + if ((hash_alg == HASH_ALG_SHA384) || (hash_alg == HASH_ALG_SHA512)) + length_len = 2 * sizeof(u64); + else + length_len = sizeof(u64); + + used_space_last_block += length_len; + hash_pad_len = hash_block_size - used_space_last_block; + if (hash_pad_len < 0) + hash_pad_len += hash_block_size; + + hash_pad_len += 1 + length_len; + return hash_pad_len; +} + +/** + * spum_gcm_ccm_pad_len() - Determine the required length of GCM or CCM padding. + * @cipher_mode: Algo type + * @data_size: Length of plaintext (bytes) + * + * Return: Length of padding, in bytes + */ +u32 spum_gcm_ccm_pad_len(enum spu_cipher_mode cipher_mode, + unsigned int data_size) +{ + u32 pad_len = 0; + u32 m1 = SPU_GCM_CCM_ALIGN - 1; + + if ((cipher_mode == CIPHER_MODE_GCM) || + (cipher_mode == CIPHER_MODE_CCM)) + pad_len = ((data_size + m1) & ~m1) - data_size; + + return pad_len; +} + +/** + * spum_assoc_resp_len() - Determine the size of the receive buffer required to + * catch associated data. + * @cipher_mode: cipher mode + * @assoc_len: length of associated data (bytes) + * @iv_len: length of IV (bytes) + * @is_encrypt: true if encrypting. false if decrypting. + * + * Return: length of associated data in response message (bytes) + */ +u32 spum_assoc_resp_len(enum spu_cipher_mode cipher_mode, + unsigned int assoc_len, unsigned int iv_len, + bool is_encrypt) +{ + u32 buflen = 0; + u32 pad; + + if (assoc_len) + buflen = assoc_len; + + if (cipher_mode == CIPHER_MODE_GCM) { + /* AAD needs to be padded in responses too */ + pad = spum_gcm_ccm_pad_len(cipher_mode, buflen); + buflen += pad; + } + if (cipher_mode == CIPHER_MODE_CCM) { + /* + * AAD needs to be padded in responses too + * for CCM, len + 2 needs to be 128-bit aligned. + */ + pad = spum_gcm_ccm_pad_len(cipher_mode, buflen + 2); + buflen += pad; + } + + return buflen; +} + +/** + * spum_aead_ivlen() - Calculate the length of the AEAD IV to be included + * in a SPU request after the AAD and before the payload. + * @cipher_mode: cipher mode + * @iv_len: initialization vector length in bytes + * + * In Linux ~4.2 and later, the assoc_data sg includes the IV. So no need + * to include the IV as a separate field in the SPU request msg. + * + * Return: Length of AEAD IV in bytes + */ +u8 spum_aead_ivlen(enum spu_cipher_mode cipher_mode, u16 iv_len) +{ + return 0; +} + +/** + * spum_hash_type() - Determine the type of hash operation. + * @src_sent: The number of bytes in the current request that have already + * been sent to the SPU to be hashed. + * + * We do not use HASH_TYPE_FULL for requests that fit in a single SPU message. + * Using FULL causes failures (such as when the string to be hashed is empty). + * For similar reasons, we never use HASH_TYPE_FIN. Instead, submit messages + * as INIT or UPDT and do the hash padding in sw. + */ +enum hash_type spum_hash_type(u32 src_sent) +{ + return src_sent ? HASH_TYPE_UPDT : HASH_TYPE_INIT; +} + +/** + * spum_digest_size() - Determine the size of a hash digest to expect the SPU to + * return. + * @alg_digest_size: Number of bytes in the final digest for the given algo + * @alg: The hash algorithm + * @htype: Type of hash operation (init, update, full, etc) + * + * When doing incremental hashing for an algorithm with a truncated hash + * (e.g., SHA224), the SPU returns the full digest so that it can be fed back as + * a partial result for the next chunk. + */ +u32 spum_digest_size(u32 alg_digest_size, enum hash_alg alg, + enum hash_type htype) +{ + u32 digestsize = alg_digest_size; + + /* SPU returns complete digest when doing incremental hash and truncated + * hash algo. + */ + if ((htype == HASH_TYPE_INIT) || (htype == HASH_TYPE_UPDT)) { + if (alg == HASH_ALG_SHA224) + digestsize = SHA256_DIGEST_SIZE; + else if (alg == HASH_ALG_SHA384) + digestsize = SHA512_DIGEST_SIZE; + } + return digestsize; +} + +/** + * spum_create_request() - Build a SPU request message header, up to and + * including the BD header. Construct the message starting at spu_hdr. Caller + * should allocate this buffer in DMA-able memory at least SPU_HEADER_ALLOC_LEN + * bytes long. + * @spu_hdr: Start of buffer where SPU request header is to be written + * @req_opts: SPU request message options + * @cipher_parms: Parameters related to cipher algorithm + * @hash_parms: Parameters related to hash algorithm + * @aead_parms: Parameters related to AEAD operation + * @data_size: Length of data to be encrypted or authenticated. If AEAD, does + * not include length of AAD. + * + * Return: the length of the SPU header in bytes. 0 if an error occurs. + */ +u32 spum_create_request(u8 *spu_hdr, + struct spu_request_opts *req_opts, + struct spu_cipher_parms *cipher_parms, + struct spu_hash_parms *hash_parms, + struct spu_aead_parms *aead_parms, + unsigned int data_size) +{ + struct SPUHEADER *spuh; + struct BDESC_HEADER *bdesc; + struct BD_HEADER *bd; + + u8 *ptr; + u32 protocol_bits = 0; + u32 cipher_bits = 0; + u32 ecf_bits = 0; + u8 sctx_words = 0; + unsigned int buf_len = 0; + + /* size of the cipher payload */ + unsigned int cipher_len = hash_parms->prebuf_len + data_size + + hash_parms->pad_len; + + /* offset of prebuf or data from end of BD header */ + unsigned int cipher_offset = aead_parms->assoc_size + + aead_parms->iv_len + aead_parms->aad_pad_len; + + /* total size of the DB data (without STAT word padding) */ + unsigned int real_db_size = spu_real_db_size(aead_parms->assoc_size, + aead_parms->iv_len, + hash_parms->prebuf_len, + data_size, + aead_parms->aad_pad_len, + aead_parms->data_pad_len, + hash_parms->pad_len); + + unsigned int auth_offset = 0; + unsigned int offset_iv = 0; + + /* size/offset of the auth payload */ + unsigned int auth_len; + + auth_len = real_db_size; + + if (req_opts->is_aead && req_opts->is_inbound) + cipher_len -= hash_parms->digestsize; + + if (req_opts->is_aead && req_opts->is_inbound) + auth_len -= hash_parms->digestsize; + + if ((hash_parms->alg == HASH_ALG_AES) && + (hash_parms->mode == HASH_MODE_XCBC)) { + auth_len -= hash_parms->pad_len; + cipher_len -= hash_parms->pad_len; + } + + flow_log("%s()\n", __func__); + flow_log(" in:%u authFirst:%u\n", + req_opts->is_inbound, req_opts->auth_first); + flow_log(" %s. cipher alg:%u mode:%u type %u\n", + spu_alg_name(cipher_parms->alg, cipher_parms->mode), + cipher_parms->alg, cipher_parms->mode, cipher_parms->type); + flow_log(" key: %d\n", cipher_parms->key_len); + flow_dump(" key: ", cipher_parms->key_buf, cipher_parms->key_len); + flow_log(" iv: %d\n", cipher_parms->iv_len); + flow_dump(" iv: ", cipher_parms->iv_buf, cipher_parms->iv_len); + flow_log(" auth alg:%u mode:%u type %u\n", + hash_parms->alg, hash_parms->mode, hash_parms->type); + flow_log(" digestsize: %u\n", hash_parms->digestsize); + flow_log(" authkey: %d\n", hash_parms->key_len); + flow_dump(" authkey: ", hash_parms->key_buf, hash_parms->key_len); + flow_log(" assoc_size:%u\n", aead_parms->assoc_size); + flow_log(" prebuf_len:%u\n", hash_parms->prebuf_len); + flow_log(" data_size:%u\n", data_size); + flow_log(" hash_pad_len:%u\n", hash_parms->pad_len); + flow_log(" real_db_size:%u\n", real_db_size); + flow_log(" auth_offset:%u auth_len:%u cipher_offset:%u cipher_len:%u\n", + auth_offset, auth_len, cipher_offset, cipher_len); + flow_log(" aead_iv: %u\n", aead_parms->iv_len); + + /* starting out: zero the header (plus some) */ + ptr = spu_hdr; + memset(ptr, 0, sizeof(struct SPUHEADER)); + + /* format master header word */ + /* Do not set the next bit even though the datasheet says to */ + spuh = (struct SPUHEADER *)ptr; + ptr += sizeof(struct SPUHEADER); + buf_len += sizeof(struct SPUHEADER); + + spuh->mh.op_code = SPU_CRYPTO_OPERATION_GENERIC; + spuh->mh.flags |= (MH_SCTX_PRES | MH_BDESC_PRES | MH_BD_PRES); + + /* Format sctx word 0 (protocol_bits) */ + sctx_words = 3; /* size in words */ + + /* Format sctx word 1 (cipher_bits) */ + if (req_opts->is_inbound) + cipher_bits |= CIPHER_INBOUND; + if (req_opts->auth_first) + cipher_bits |= CIPHER_ORDER; + + /* Set the crypto parameters in the cipher.flags */ + cipher_bits |= cipher_parms->alg << CIPHER_ALG_SHIFT; + cipher_bits |= cipher_parms->mode << CIPHER_MODE_SHIFT; + cipher_bits |= cipher_parms->type << CIPHER_TYPE_SHIFT; + + /* Set the auth parameters in the cipher.flags */ + cipher_bits |= hash_parms->alg << HASH_ALG_SHIFT; + cipher_bits |= hash_parms->mode << HASH_MODE_SHIFT; + cipher_bits |= hash_parms->type << HASH_TYPE_SHIFT; + + /* + * Format sctx extensions if required, and update main fields if + * required) + */ + if (hash_parms->alg) { + /* Write the authentication key material if present */ + if (hash_parms->key_len) { + memcpy(ptr, hash_parms->key_buf, hash_parms->key_len); + ptr += hash_parms->key_len; + buf_len += hash_parms->key_len; + sctx_words += hash_parms->key_len / 4; + } + + if ((cipher_parms->mode == CIPHER_MODE_GCM) || + (cipher_parms->mode == CIPHER_MODE_CCM)) + /* unpadded length */ + offset_iv = aead_parms->assoc_size; + + /* if GCM/CCM we need to write ICV into the payload */ + if (!req_opts->is_inbound) { + if ((cipher_parms->mode == CIPHER_MODE_GCM) || + (cipher_parms->mode == CIPHER_MODE_CCM)) + ecf_bits |= 1 << INSERT_ICV_SHIFT; + } else { + ecf_bits |= CHECK_ICV; + } + + /* Inform the SPU of the ICV size (in words) */ + if (hash_parms->digestsize == 64) + cipher_bits |= ICV_IS_512; + else + ecf_bits |= + (hash_parms->digestsize / 4) << ICV_SIZE_SHIFT; + } + + if (req_opts->bd_suppress) + ecf_bits |= BD_SUPPRESS; + + /* copy the encryption keys in the SAD entry */ + if (cipher_parms->alg) { + if (cipher_parms->key_len) { + memcpy(ptr, cipher_parms->key_buf, + cipher_parms->key_len); + ptr += cipher_parms->key_len; + buf_len += cipher_parms->key_len; + sctx_words += cipher_parms->key_len / 4; + } + + /* + * if encrypting then set IV size, use SCTX IV unless no IV + * given here + */ + if (cipher_parms->iv_buf && cipher_parms->iv_len) { + /* Use SCTX IV */ + ecf_bits |= SCTX_IV; + + /* cipher iv provided so put it in here */ + memcpy(ptr, cipher_parms->iv_buf, cipher_parms->iv_len); + + ptr += cipher_parms->iv_len; + buf_len += cipher_parms->iv_len; + sctx_words += cipher_parms->iv_len / 4; + } + } + + /* + * RFC4543 (GMAC/ESP) requires data to be sent as part of AAD + * so we need to override the BDESC parameters. + */ + if (req_opts->is_rfc4543) { + if (req_opts->is_inbound) + data_size -= hash_parms->digestsize; + offset_iv = aead_parms->assoc_size + data_size; + cipher_len = 0; + cipher_offset = offset_iv; + auth_len = cipher_offset + aead_parms->data_pad_len; + } + + /* write in the total sctx length now that we know it */ + protocol_bits |= sctx_words; + + /* Endian adjust the SCTX */ + spuh->sa.proto_flags = cpu_to_be32(protocol_bits); + spuh->sa.cipher_flags = cpu_to_be32(cipher_bits); + spuh->sa.ecf = cpu_to_be32(ecf_bits); + + /* === create the BDESC section === */ + bdesc = (struct BDESC_HEADER *)ptr; + + bdesc->offset_mac = cpu_to_be16(auth_offset); + bdesc->length_mac = cpu_to_be16(auth_len); + bdesc->offset_crypto = cpu_to_be16(cipher_offset); + bdesc->length_crypto = cpu_to_be16(cipher_len); + + /* + * CCM in SPU-M requires that ICV not be in same 32-bit word as data or + * padding. So account for padding as necessary. + */ + if (cipher_parms->mode == CIPHER_MODE_CCM) + auth_len += spum_wordalign_padlen(auth_len); + + bdesc->offset_icv = cpu_to_be16(auth_len); + bdesc->offset_iv = cpu_to_be16(offset_iv); + + ptr += sizeof(struct BDESC_HEADER); + buf_len += sizeof(struct BDESC_HEADER); + + /* === no MFM section === */ + + /* === create the BD section === */ + + /* add the BD header */ + bd = (struct BD_HEADER *)ptr; + bd->size = cpu_to_be16(real_db_size); + bd->prev_length = 0; + + ptr += sizeof(struct BD_HEADER); + buf_len += sizeof(struct BD_HEADER); + + packet_dump(" SPU request header: ", spu_hdr, buf_len); + + return buf_len; +} + +/** + * spum_cipher_req_init() - Build a SPU request message header, up to and + * including the BD header. + * @spu_hdr: Start of SPU request header (MH) + * @cipher_parms: Parameters that describe the cipher request + * + * Construct the message starting at spu_hdr. Caller should allocate this buffer + * in DMA-able memory at least SPU_HEADER_ALLOC_LEN bytes long. + * + * Return: the length of the SPU header in bytes. 0 if an error occurs. + */ +u16 spum_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms) +{ + struct SPUHEADER *spuh; + u32 protocol_bits = 0; + u32 cipher_bits = 0; + u32 ecf_bits = 0; + u8 sctx_words = 0; + u8 *ptr = spu_hdr; + + flow_log("%s()\n", __func__); + flow_log(" cipher alg:%u mode:%u type %u\n", cipher_parms->alg, + cipher_parms->mode, cipher_parms->type); + flow_log(" cipher_iv_len: %u\n", cipher_parms->iv_len); + flow_log(" key: %d\n", cipher_parms->key_len); + flow_dump(" key: ", cipher_parms->key_buf, cipher_parms->key_len); + + /* starting out: zero the header (plus some) */ + memset(spu_hdr, 0, sizeof(struct SPUHEADER)); + ptr += sizeof(struct SPUHEADER); + + /* format master header word */ + /* Do not set the next bit even though the datasheet says to */ + spuh = (struct SPUHEADER *)spu_hdr; + + spuh->mh.op_code = SPU_CRYPTO_OPERATION_GENERIC; + spuh->mh.flags |= (MH_SCTX_PRES | MH_BDESC_PRES | MH_BD_PRES); + + /* Format sctx word 0 (protocol_bits) */ + sctx_words = 3; /* size in words */ + + /* copy the encryption keys in the SAD entry */ + if (cipher_parms->alg) { + if (cipher_parms->key_len) { + ptr += cipher_parms->key_len; + sctx_words += cipher_parms->key_len / 4; + } + + /* + * if encrypting then set IV size, use SCTX IV unless no IV + * given here + */ + if (cipher_parms->iv_len) { + /* Use SCTX IV */ + ecf_bits |= SCTX_IV; + ptr += cipher_parms->iv_len; + sctx_words += cipher_parms->iv_len / 4; + } + } + + /* Set the crypto parameters in the cipher.flags */ + cipher_bits |= cipher_parms->alg << CIPHER_ALG_SHIFT; + cipher_bits |= cipher_parms->mode << CIPHER_MODE_SHIFT; + cipher_bits |= cipher_parms->type << CIPHER_TYPE_SHIFT; + + /* copy the encryption keys in the SAD entry */ + if (cipher_parms->alg && cipher_parms->key_len) + memcpy(spuh + 1, cipher_parms->key_buf, cipher_parms->key_len); + + /* write in the total sctx length now that we know it */ + protocol_bits |= sctx_words; + + /* Endian adjust the SCTX */ + spuh->sa.proto_flags = cpu_to_be32(protocol_bits); + + /* Endian adjust the SCTX */ + spuh->sa.cipher_flags = cpu_to_be32(cipher_bits); + spuh->sa.ecf = cpu_to_be32(ecf_bits); + + packet_dump(" SPU request header: ", spu_hdr, + sizeof(struct SPUHEADER)); + + return sizeof(struct SPUHEADER) + cipher_parms->key_len + + cipher_parms->iv_len + sizeof(struct BDESC_HEADER) + + sizeof(struct BD_HEADER); +} + +/** + * spum_cipher_req_finish() - Finish building a SPU request message header for a + * block cipher request. Assumes much of the header was already filled in at + * setkey() time in spu_cipher_req_init(). + * @spu_hdr: Start of the request message header (MH field) + * @spu_req_hdr_len: Length in bytes of the SPU request header + * @is_inbound: 0 encrypt, 1 decrypt + * @cipher_parms: Parameters describing cipher operation to be performed + * @data_size: Length of the data in the BD field + * + * Assumes much of the header was already filled in at setkey() time in + * spum_cipher_req_init(). + * spum_cipher_req_init() fills in the encryption key. + */ +void spum_cipher_req_finish(u8 *spu_hdr, + u16 spu_req_hdr_len, + unsigned int is_inbound, + struct spu_cipher_parms *cipher_parms, + unsigned int data_size) +{ + struct SPUHEADER *spuh; + struct BDESC_HEADER *bdesc; + struct BD_HEADER *bd; + u8 *bdesc_ptr = spu_hdr + spu_req_hdr_len - + (sizeof(struct BD_HEADER) + sizeof(struct BDESC_HEADER)); + + u32 cipher_bits; + + flow_log("%s()\n", __func__); + flow_log(" in: %u\n", is_inbound); + flow_log(" cipher alg: %u, cipher_type: %u\n", cipher_parms->alg, + cipher_parms->type); + + /* + * In XTS mode, API puts "i" parameter (block tweak) in IV. For + * SPU-M, should be in start of the BD; tx_sg_create() copies it there. + * IV in SPU msg for SPU-M should be 0, since that's the "j" parameter + * (block ctr within larger data unit) - given we can send entire disk + * block (<= 4KB) in 1 SPU msg, don't need to use this parameter. + */ + if (cipher_parms->mode == CIPHER_MODE_XTS) + memset(cipher_parms->iv_buf, 0, cipher_parms->iv_len); + + flow_log(" iv len: %d\n", cipher_parms->iv_len); + flow_dump(" iv: ", cipher_parms->iv_buf, cipher_parms->iv_len); + flow_log(" data_size: %u\n", data_size); + + /* format master header word */ + /* Do not set the next bit even though the datasheet says to */ + spuh = (struct SPUHEADER *)spu_hdr; + + /* cipher_bits was initialized at setkey time */ + cipher_bits = be32_to_cpu(spuh->sa.cipher_flags); + + /* Format sctx word 1 (cipher_bits) */ + if (is_inbound) + cipher_bits |= CIPHER_INBOUND; + else + cipher_bits &= ~CIPHER_INBOUND; + + if (cipher_parms->alg && cipher_parms->iv_buf && cipher_parms->iv_len) + /* cipher iv provided so put it in here */ + memcpy(bdesc_ptr - cipher_parms->iv_len, cipher_parms->iv_buf, + cipher_parms->iv_len); + + spuh->sa.cipher_flags = cpu_to_be32(cipher_bits); + + /* === create the BDESC section === */ + bdesc = (struct BDESC_HEADER *)bdesc_ptr; + bdesc->offset_mac = 0; + bdesc->length_mac = 0; + bdesc->offset_crypto = 0; + + /* XTS mode, data_size needs to include tweak parameter */ + if (cipher_parms->mode == CIPHER_MODE_XTS) + bdesc->length_crypto = cpu_to_be16(data_size + + SPU_XTS_TWEAK_SIZE); + else + bdesc->length_crypto = cpu_to_be16(data_size); + + bdesc->offset_icv = 0; + bdesc->offset_iv = 0; + + /* === no MFM section === */ + + /* === create the BD section === */ + /* add the BD header */ + bd = (struct BD_HEADER *)(bdesc_ptr + sizeof(struct BDESC_HEADER)); + bd->size = cpu_to_be16(data_size); + + /* XTS mode, data_size needs to include tweak parameter */ + if (cipher_parms->mode == CIPHER_MODE_XTS) + bd->size = cpu_to_be16(data_size + SPU_XTS_TWEAK_SIZE); + else + bd->size = cpu_to_be16(data_size); + + bd->prev_length = 0; + + packet_dump(" SPU request header: ", spu_hdr, spu_req_hdr_len); +} + +/** + * spum_request_pad() - Create pad bytes at the end of the data. + * @pad_start: Start of buffer where pad bytes are to be written + * @gcm_ccm_padding: length of GCM/CCM padding, in bytes + * @hash_pad_len: Number of bytes of padding extend data to full block + * @auth_alg: authentication algorithm + * @auth_mode: authentication mode + * @total_sent: length inserted at end of hash pad + * @status_padding: Number of bytes of padding to align STATUS word + * + * There may be three forms of pad: + * 1. GCM/CCM pad - for GCM/CCM mode ciphers, pad to 16-byte alignment + * 2. hash pad - pad to a block length, with 0x80 data terminator and + * size at the end + * 3. STAT pad - to ensure the STAT field is 4-byte aligned + */ +void spum_request_pad(u8 *pad_start, + u32 gcm_ccm_padding, + u32 hash_pad_len, + enum hash_alg auth_alg, + enum hash_mode auth_mode, + unsigned int total_sent, u32 status_padding) +{ + u8 *ptr = pad_start; + + /* fix data alignent for GCM/CCM */ + if (gcm_ccm_padding > 0) { + flow_log(" GCM: padding to 16 byte alignment: %u bytes\n", + gcm_ccm_padding); + memset(ptr, 0, gcm_ccm_padding); + ptr += gcm_ccm_padding; + } + + if (hash_pad_len > 0) { + /* clear the padding section */ + memset(ptr, 0, hash_pad_len); + + if ((auth_alg == HASH_ALG_AES) && + (auth_mode == HASH_MODE_XCBC)) { + /* AES/XCBC just requires padding to be 0s */ + ptr += hash_pad_len; + } else { + /* terminate the data */ + *ptr = 0x80; + ptr += (hash_pad_len - sizeof(u64)); + + /* add the size at the end as required per alg */ + if (auth_alg == HASH_ALG_MD5) + *(__le64 *)ptr = cpu_to_le64(total_sent * 8ull); + else /* SHA1, SHA2-224, SHA2-256 */ + *(__be64 *)ptr = cpu_to_be64(total_sent * 8ull); + ptr += sizeof(u64); + } + } + + /* pad to a 4byte alignment for STAT */ + if (status_padding > 0) { + flow_log(" STAT: padding to 4 byte alignment: %u bytes\n", + status_padding); + + memset(ptr, 0, status_padding); + ptr += status_padding; + } +} + +/** + * spum_xts_tweak_in_payload() - Indicate that SPUM DOES place the XTS tweak + * field in the packet payload (rather than using IV) + * + * Return: 1 + */ +u8 spum_xts_tweak_in_payload(void) +{ + return 1; +} + +/** + * spum_tx_status_len() - Return the length of the STATUS field in a SPU + * response message. + * + * Return: Length of STATUS field in bytes. + */ +u8 spum_tx_status_len(void) +{ + return SPU_TX_STATUS_LEN; +} + +/** + * spum_rx_status_len() - Return the length of the STATUS field in a SPU + * response message. + * + * Return: Length of STATUS field in bytes. + */ +u8 spum_rx_status_len(void) +{ + return SPU_RX_STATUS_LEN; +} + +/** + * spum_status_process() - Process the status from a SPU response message. + * @statp: start of STATUS word + * Return: + * 0 - if status is good and response should be processed + * !0 - status indicates an error and response is invalid + */ +int spum_status_process(u8 *statp) +{ + u32 status; + + status = __be32_to_cpu(*(__be32 *)statp); + flow_log("SPU response STATUS %#08x\n", status); + if (status & SPU_STATUS_ERROR_FLAG) { + pr_err("%s() Warning: Error result from SPU: %#08x\n", + __func__, status); + if (status & SPU_STATUS_INVALID_ICV) + return SPU_INVALID_ICV; + return -EBADMSG; + } + return 0; +} + +/** + * spum_ccm_update_iv() - Update the IV as per the requirements for CCM mode. + * + * @digestsize: Digest size of this request + * @cipher_parms: (pointer to) cipher parmaeters, includes IV buf & IV len + * @assoclen: Length of AAD data + * @chunksize: length of input data to be sent in this req + * @is_encrypt: true if this is an output/encrypt operation + * @is_esp: true if this is an ESP / RFC4309 operation + * + */ +void spum_ccm_update_iv(unsigned int digestsize, + struct spu_cipher_parms *cipher_parms, + unsigned int assoclen, + unsigned int chunksize, + bool is_encrypt, + bool is_esp) +{ + u8 L; /* L from CCM algorithm, length of plaintext data */ + u8 mprime; /* M' from CCM algo, (M - 2) / 2, where M=authsize */ + u8 adata; + + if (cipher_parms->iv_len != CCM_AES_IV_SIZE) { + pr_err("%s(): Invalid IV len %d for CCM mode, should be %d\n", + __func__, cipher_parms->iv_len, CCM_AES_IV_SIZE); + return; + } + + /* + * IV needs to be formatted as follows: + * + * | Byte 0 | Bytes 1 - N | Bytes (N+1) - 15 | + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | Bits 7 - 0 | Bits 7 - 0 | + * | 0 |Ad?|(M - 2) / 2| L - 1 | Nonce | Plaintext Length | + * + * Ad? = 1 if AAD present, 0 if not present + * M = size of auth field, 8, 12, or 16 bytes (SPU-M) -or- + * 4, 6, 8, 10, 12, 14, 16 bytes (SPU2) + * L = Size of Plaintext Length field; Nonce size = 15 - L + * + * It appears that the crypto API already expects the L-1 portion + * to be set in the first byte of the IV, which implicitly determines + * the nonce size, and also fills in the nonce. But the other bits + * in byte 0 as well as the plaintext length need to be filled in. + * + * In rfc4309/esp mode, L is not already in the supplied IV and + * we need to fill it in, as well as move the IV data to be after + * the salt + */ + if (is_esp) { + L = CCM_ESP_L_VALUE; /* RFC4309 has fixed L */ + } else { + /* L' = plaintext length - 1 so Plaintext length is L' + 1 */ + L = ((cipher_parms->iv_buf[0] & CCM_B0_L_PRIME) >> + CCM_B0_L_PRIME_SHIFT) + 1; + } + + mprime = (digestsize - 2) >> 1; /* M' = (M - 2) / 2 */ + adata = (assoclen > 0); /* adata = 1 if any associated data */ + + cipher_parms->iv_buf[0] = (adata << CCM_B0_ADATA_SHIFT) | + (mprime << CCM_B0_M_PRIME_SHIFT) | + ((L - 1) << CCM_B0_L_PRIME_SHIFT); + + /* Nonce is already filled in by crypto API, and is 15 - L bytes */ + + /* Don't include digest in plaintext size when decrypting */ + if (!is_encrypt) + chunksize -= digestsize; + + /* Fill in length of plaintext, formatted to be L bytes long */ + format_value_ccm(chunksize, &cipher_parms->iv_buf[15 - L + 1], L); +} + +/** + * spum_wordalign_padlen() - Given the length of a data field, determine the + * padding required to align the data following this field on a 4-byte boundary. + * @data_size: length of data field in bytes + * + * Return: length of status field padding, in bytes + */ +u32 spum_wordalign_padlen(u32 data_size) +{ + return ((data_size + 3) & ~3) - data_size; +} diff --git a/drivers/crypto/bcm/spu.h b/drivers/crypto/bcm/spu.h new file mode 100644 index 000000000..1c386a2d5 --- /dev/null +++ b/drivers/crypto/bcm/spu.h @@ -0,0 +1,276 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2016 Broadcom + */ + +/* + * This file contains the definition of SPU messages. There are currently two + * SPU message formats: SPU-M and SPU2. The hardware uses different values to + * identify the same things in SPU-M vs SPU2. So this file defines values that + * are hardware independent. Software can use these values for any version of + * SPU hardware. These values are used in APIs in spu.c. Functions internal to + * spu.c and spu2.c convert these to hardware-specific values. + */ + +#ifndef _SPU_H +#define _SPU_H + +#include <linux/types.h> +#include <linux/scatterlist.h> +#include <crypto/sha1.h> +#include <crypto/sha2.h> + +enum spu_cipher_alg { + CIPHER_ALG_NONE = 0x0, + CIPHER_ALG_RC4 = 0x1, + CIPHER_ALG_DES = 0x2, + CIPHER_ALG_3DES = 0x3, + CIPHER_ALG_AES = 0x4, + CIPHER_ALG_LAST = 0x5 +}; + +enum spu_cipher_mode { + CIPHER_MODE_NONE = 0x0, + CIPHER_MODE_ECB = 0x0, + CIPHER_MODE_CBC = 0x1, + CIPHER_MODE_OFB = 0x2, + CIPHER_MODE_CFB = 0x3, + CIPHER_MODE_CTR = 0x4, + CIPHER_MODE_CCM = 0x5, + CIPHER_MODE_GCM = 0x6, + CIPHER_MODE_XTS = 0x7, + CIPHER_MODE_LAST = 0x8 +}; + +enum spu_cipher_type { + CIPHER_TYPE_NONE = 0x0, + CIPHER_TYPE_DES = 0x0, + CIPHER_TYPE_3DES = 0x0, + CIPHER_TYPE_INIT = 0x0, /* used for ARC4 */ + CIPHER_TYPE_AES128 = 0x0, + CIPHER_TYPE_AES192 = 0x1, + CIPHER_TYPE_UPDT = 0x1, /* used for ARC4 */ + CIPHER_TYPE_AES256 = 0x2, +}; + +enum hash_alg { + HASH_ALG_NONE = 0x0, + HASH_ALG_MD5 = 0x1, + HASH_ALG_SHA1 = 0x2, + HASH_ALG_SHA224 = 0x3, + HASH_ALG_SHA256 = 0x4, + HASH_ALG_AES = 0x5, + HASH_ALG_SHA384 = 0x6, + HASH_ALG_SHA512 = 0x7, + /* Keep SHA3 algorithms at the end always */ + HASH_ALG_SHA3_224 = 0x8, + HASH_ALG_SHA3_256 = 0x9, + HASH_ALG_SHA3_384 = 0xa, + HASH_ALG_SHA3_512 = 0xb, + HASH_ALG_LAST +}; + +enum hash_mode { + HASH_MODE_NONE = 0x0, + HASH_MODE_HASH = 0x0, + HASH_MODE_XCBC = 0x0, + HASH_MODE_CMAC = 0x1, + HASH_MODE_CTXT = 0x1, + HASH_MODE_HMAC = 0x2, + HASH_MODE_RABIN = 0x4, + HASH_MODE_FHMAC = 0x6, + HASH_MODE_CCM = 0x5, + HASH_MODE_GCM = 0x6, +}; + +enum hash_type { + HASH_TYPE_NONE = 0x0, + HASH_TYPE_FULL = 0x0, + HASH_TYPE_INIT = 0x1, + HASH_TYPE_UPDT = 0x2, + HASH_TYPE_FIN = 0x3, + HASH_TYPE_AES128 = 0x0, + HASH_TYPE_AES192 = 0x1, + HASH_TYPE_AES256 = 0x2 +}; + +enum aead_type { + AES_CCM, + AES_GCM, + AUTHENC, + AEAD_TYPE_LAST +}; + +extern char *hash_alg_name[HASH_ALG_LAST]; +extern char *aead_alg_name[AEAD_TYPE_LAST]; + +struct spu_request_opts { + bool is_inbound; + bool auth_first; + bool is_aead; + bool is_esp; + bool bd_suppress; + bool is_rfc4543; +}; + +struct spu_cipher_parms { + enum spu_cipher_alg alg; + enum spu_cipher_mode mode; + enum spu_cipher_type type; + u8 *key_buf; + u16 key_len; + /* iv_buf and iv_len include salt, if applicable */ + u8 *iv_buf; + u16 iv_len; +}; + +struct spu_hash_parms { + enum hash_alg alg; + enum hash_mode mode; + enum hash_type type; + u8 digestsize; + u8 *key_buf; + u16 key_len; + u16 prebuf_len; + /* length of hash pad. signed, needs to handle roll-overs */ + int pad_len; +}; + +struct spu_aead_parms { + u32 assoc_size; + u16 iv_len; /* length of IV field between assoc data and data */ + u8 aad_pad_len; /* For AES GCM/CCM, length of padding after AAD */ + u8 data_pad_len;/* For AES GCM/CCM, length of padding after data */ + bool return_iv; /* True if SPU should return an IV */ + u32 ret_iv_len; /* Length in bytes of returned IV */ + u32 ret_iv_off; /* Offset into full IV if partial IV returned */ +}; + +/************** SPU sizes ***************/ + +#define SPU_RX_STATUS_LEN 4 + +/* Max length of padding for 4-byte alignment of STATUS field */ +#define SPU_STAT_PAD_MAX 4 + +/* Max length of pad fragment. 4 is for 4-byte alignment of STATUS field */ +#define SPU_PAD_LEN_MAX (SPU_GCM_CCM_ALIGN + MAX_HASH_BLOCK_SIZE + \ + SPU_STAT_PAD_MAX) + +/* GCM and CCM require 16-byte alignment */ +#define SPU_GCM_CCM_ALIGN 16 + +/* Length up SUPDT field in SPU response message for RC4 */ +#define SPU_SUPDT_LEN 260 + +/* SPU status error codes. These used as common error codes across all + * SPU variants. + */ +#define SPU_INVALID_ICV 1 + +/* Indicates no limit to the length of the payload in a SPU message */ +#define SPU_MAX_PAYLOAD_INF 0xFFFFFFFF + +/* Size of XTS tweak ("i" parameter), in bytes */ +#define SPU_XTS_TWEAK_SIZE 16 + +/* CCM B_0 field definitions, common for SPU-M and SPU2 */ +#define CCM_B0_ADATA 0x40 +#define CCM_B0_ADATA_SHIFT 6 +#define CCM_B0_M_PRIME 0x38 +#define CCM_B0_M_PRIME_SHIFT 3 +#define CCM_B0_L_PRIME 0x07 +#define CCM_B0_L_PRIME_SHIFT 0 +#define CCM_ESP_L_VALUE 4 + +/** + * spu_req_incl_icv() - Return true if SPU request message should include the + * ICV as a separate buffer. + * @cipher_mode: the cipher mode being requested + * @is_encrypt: true if encrypting. false if decrypting. + * + * Return: true if ICV to be included as separate buffer + */ +static __always_inline bool spu_req_incl_icv(enum spu_cipher_mode cipher_mode, + bool is_encrypt) +{ + if ((cipher_mode == CIPHER_MODE_GCM) && !is_encrypt) + return true; + if ((cipher_mode == CIPHER_MODE_CCM) && !is_encrypt) + return true; + + return false; +} + +static __always_inline u32 spu_real_db_size(u32 assoc_size, + u32 aead_iv_buf_len, + u32 prebuf_len, + u32 data_size, + u32 aad_pad_len, + u32 gcm_pad_len, + u32 hash_pad_len) +{ + return assoc_size + aead_iv_buf_len + prebuf_len + data_size + + aad_pad_len + gcm_pad_len + hash_pad_len; +} + +/************** SPU Functions Prototypes **************/ + +void spum_dump_msg_hdr(u8 *buf, unsigned int buf_len); + +u32 spum_ns2_ctx_max_payload(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize); +u32 spum_nsp_ctx_max_payload(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize); +u32 spum_payload_length(u8 *spu_hdr); +u16 spum_response_hdr_len(u16 auth_key_len, u16 enc_key_len, bool is_hash); +u16 spum_hash_pad_len(enum hash_alg hash_alg, enum hash_mode hash_mode, + u32 chunksize, u16 hash_block_size); +u32 spum_gcm_ccm_pad_len(enum spu_cipher_mode cipher_mode, + unsigned int data_size); +u32 spum_assoc_resp_len(enum spu_cipher_mode cipher_mode, + unsigned int assoc_len, unsigned int iv_len, + bool is_encrypt); +u8 spum_aead_ivlen(enum spu_cipher_mode cipher_mode, u16 iv_len); +bool spu_req_incl_icv(enum spu_cipher_mode cipher_mode, bool is_encrypt); +enum hash_type spum_hash_type(u32 src_sent); +u32 spum_digest_size(u32 alg_digest_size, enum hash_alg alg, + enum hash_type htype); + +u32 spum_create_request(u8 *spu_hdr, + struct spu_request_opts *req_opts, + struct spu_cipher_parms *cipher_parms, + struct spu_hash_parms *hash_parms, + struct spu_aead_parms *aead_parms, + unsigned int data_size); + +u16 spum_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms); + +void spum_cipher_req_finish(u8 *spu_hdr, + u16 spu_req_hdr_len, + unsigned int is_inbound, + struct spu_cipher_parms *cipher_parms, + unsigned int data_size); + +void spum_request_pad(u8 *pad_start, + u32 gcm_padding, + u32 hash_pad_len, + enum hash_alg auth_alg, + enum hash_mode auth_mode, + unsigned int total_sent, u32 status_padding); + +u8 spum_xts_tweak_in_payload(void); +u8 spum_tx_status_len(void); +u8 spum_rx_status_len(void); +int spum_status_process(u8 *statp); + +void spum_ccm_update_iv(unsigned int digestsize, + struct spu_cipher_parms *cipher_parms, + unsigned int assoclen, + unsigned int chunksize, + bool is_encrypt, + bool is_esp); +u32 spum_wordalign_padlen(u32 data_size); +#endif diff --git a/drivers/crypto/bcm/spu2.c b/drivers/crypto/bcm/spu2.c new file mode 100644 index 000000000..07989bb8c --- /dev/null +++ b/drivers/crypto/bcm/spu2.c @@ -0,0 +1,1384 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 Broadcom + */ + +/* + * This file works with the SPU2 version of the SPU. SPU2 has different message + * formats than the previous version of the SPU. All SPU message format + * differences should be hidden in the spux.c,h files. + */ + +#include <linux/kernel.h> +#include <linux/string.h> + +#include "util.h" +#include "spu.h" +#include "spu2.h" + +#define SPU2_TX_STATUS_LEN 0 /* SPU2 has no STATUS in input packet */ + +/* + * Controlled by pkt_stat_cnt field in CRYPTO_SS_SPU0_CORE_SPU2_CONTROL0 + * register. Defaults to 2. + */ +#define SPU2_RX_STATUS_LEN 2 + +enum spu2_proto_sel { + SPU2_PROTO_RESV = 0, + SPU2_MACSEC_SECTAG8_ECB = 1, + SPU2_MACSEC_SECTAG8_SCB = 2, + SPU2_MACSEC_SECTAG16 = 3, + SPU2_MACSEC_SECTAG16_8_XPN = 4, + SPU2_IPSEC = 5, + SPU2_IPSEC_ESN = 6, + SPU2_TLS_CIPHER = 7, + SPU2_TLS_AEAD = 8, + SPU2_DTLS_CIPHER = 9, + SPU2_DTLS_AEAD = 10 +}; + +static char *spu2_cipher_type_names[] = { "None", "AES128", "AES192", "AES256", + "DES", "3DES" +}; + +static char *spu2_cipher_mode_names[] = { "ECB", "CBC", "CTR", "CFB", "OFB", + "XTS", "CCM", "GCM" +}; + +static char *spu2_hash_type_names[] = { "None", "AES128", "AES192", "AES256", + "Reserved", "Reserved", "MD5", "SHA1", "SHA224", "SHA256", "SHA384", + "SHA512", "SHA512/224", "SHA512/256", "SHA3-224", "SHA3-256", + "SHA3-384", "SHA3-512" +}; + +static char *spu2_hash_mode_names[] = { "CMAC", "CBC-MAC", "XCBC-MAC", "HMAC", + "Rabin", "CCM", "GCM", "Reserved" +}; + +static char *spu2_ciph_type_name(enum spu2_cipher_type cipher_type) +{ + if (cipher_type >= SPU2_CIPHER_TYPE_LAST) + return "Reserved"; + return spu2_cipher_type_names[cipher_type]; +} + +static char *spu2_ciph_mode_name(enum spu2_cipher_mode cipher_mode) +{ + if (cipher_mode >= SPU2_CIPHER_MODE_LAST) + return "Reserved"; + return spu2_cipher_mode_names[cipher_mode]; +} + +static char *spu2_hash_type_name(enum spu2_hash_type hash_type) +{ + if (hash_type >= SPU2_HASH_TYPE_LAST) + return "Reserved"; + return spu2_hash_type_names[hash_type]; +} + +static char *spu2_hash_mode_name(enum spu2_hash_mode hash_mode) +{ + if (hash_mode >= SPU2_HASH_MODE_LAST) + return "Reserved"; + return spu2_hash_mode_names[hash_mode]; +} + +/* + * Convert from a software cipher mode value to the corresponding value + * for SPU2. + */ +static int spu2_cipher_mode_xlate(enum spu_cipher_mode cipher_mode, + enum spu2_cipher_mode *spu2_mode) +{ + switch (cipher_mode) { + case CIPHER_MODE_ECB: + *spu2_mode = SPU2_CIPHER_MODE_ECB; + break; + case CIPHER_MODE_CBC: + *spu2_mode = SPU2_CIPHER_MODE_CBC; + break; + case CIPHER_MODE_OFB: + *spu2_mode = SPU2_CIPHER_MODE_OFB; + break; + case CIPHER_MODE_CFB: + *spu2_mode = SPU2_CIPHER_MODE_CFB; + break; + case CIPHER_MODE_CTR: + *spu2_mode = SPU2_CIPHER_MODE_CTR; + break; + case CIPHER_MODE_CCM: + *spu2_mode = SPU2_CIPHER_MODE_CCM; + break; + case CIPHER_MODE_GCM: + *spu2_mode = SPU2_CIPHER_MODE_GCM; + break; + case CIPHER_MODE_XTS: + *spu2_mode = SPU2_CIPHER_MODE_XTS; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * spu2_cipher_xlate() - Convert a cipher {alg/mode/type} triple to a SPU2 + * cipher type and mode. + * @cipher_alg: [in] cipher algorithm value from software enumeration + * @cipher_mode: [in] cipher mode value from software enumeration + * @cipher_type: [in] cipher type value from software enumeration + * @spu2_type: [out] cipher type value used by spu2 hardware + * @spu2_mode: [out] cipher mode value used by spu2 hardware + * + * Return: 0 if successful + */ +static int spu2_cipher_xlate(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + enum spu_cipher_type cipher_type, + enum spu2_cipher_type *spu2_type, + enum spu2_cipher_mode *spu2_mode) +{ + int err; + + err = spu2_cipher_mode_xlate(cipher_mode, spu2_mode); + if (err) { + flow_log("Invalid cipher mode %d\n", cipher_mode); + return err; + } + + switch (cipher_alg) { + case CIPHER_ALG_NONE: + *spu2_type = SPU2_CIPHER_TYPE_NONE; + break; + case CIPHER_ALG_RC4: + /* SPU2 does not support RC4 */ + err = -EINVAL; + *spu2_type = SPU2_CIPHER_TYPE_NONE; + break; + case CIPHER_ALG_DES: + *spu2_type = SPU2_CIPHER_TYPE_DES; + break; + case CIPHER_ALG_3DES: + *spu2_type = SPU2_CIPHER_TYPE_3DES; + break; + case CIPHER_ALG_AES: + switch (cipher_type) { + case CIPHER_TYPE_AES128: + *spu2_type = SPU2_CIPHER_TYPE_AES128; + break; + case CIPHER_TYPE_AES192: + *spu2_type = SPU2_CIPHER_TYPE_AES192; + break; + case CIPHER_TYPE_AES256: + *spu2_type = SPU2_CIPHER_TYPE_AES256; + break; + default: + err = -EINVAL; + } + break; + case CIPHER_ALG_LAST: + default: + err = -EINVAL; + break; + } + + if (err) + flow_log("Invalid cipher alg %d or type %d\n", + cipher_alg, cipher_type); + return err; +} + +/* + * Convert from a software hash mode value to the corresponding value + * for SPU2. Note that HASH_MODE_NONE and HASH_MODE_XCBC have the same value. + */ +static int spu2_hash_mode_xlate(enum hash_mode hash_mode, + enum spu2_hash_mode *spu2_mode) +{ + switch (hash_mode) { + case HASH_MODE_XCBC: + *spu2_mode = SPU2_HASH_MODE_XCBC_MAC; + break; + case HASH_MODE_CMAC: + *spu2_mode = SPU2_HASH_MODE_CMAC; + break; + case HASH_MODE_HMAC: + *spu2_mode = SPU2_HASH_MODE_HMAC; + break; + case HASH_MODE_CCM: + *spu2_mode = SPU2_HASH_MODE_CCM; + break; + case HASH_MODE_GCM: + *spu2_mode = SPU2_HASH_MODE_GCM; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * spu2_hash_xlate() - Convert a hash {alg/mode/type} triple to a SPU2 hash type + * and mode. + * @hash_alg: [in] hash algorithm value from software enumeration + * @hash_mode: [in] hash mode value from software enumeration + * @hash_type: [in] hash type value from software enumeration + * @ciph_type: [in] cipher type value from software enumeration + * @spu2_type: [out] hash type value used by SPU2 hardware + * @spu2_mode: [out] hash mode value used by SPU2 hardware + * + * Return: 0 if successful + */ +static int +spu2_hash_xlate(enum hash_alg hash_alg, enum hash_mode hash_mode, + enum hash_type hash_type, enum spu_cipher_type ciph_type, + enum spu2_hash_type *spu2_type, enum spu2_hash_mode *spu2_mode) +{ + int err; + + err = spu2_hash_mode_xlate(hash_mode, spu2_mode); + if (err) { + flow_log("Invalid hash mode %d\n", hash_mode); + return err; + } + + switch (hash_alg) { + case HASH_ALG_NONE: + *spu2_type = SPU2_HASH_TYPE_NONE; + break; + case HASH_ALG_MD5: + *spu2_type = SPU2_HASH_TYPE_MD5; + break; + case HASH_ALG_SHA1: + *spu2_type = SPU2_HASH_TYPE_SHA1; + break; + case HASH_ALG_SHA224: + *spu2_type = SPU2_HASH_TYPE_SHA224; + break; + case HASH_ALG_SHA256: + *spu2_type = SPU2_HASH_TYPE_SHA256; + break; + case HASH_ALG_SHA384: + *spu2_type = SPU2_HASH_TYPE_SHA384; + break; + case HASH_ALG_SHA512: + *spu2_type = SPU2_HASH_TYPE_SHA512; + break; + case HASH_ALG_AES: + switch (ciph_type) { + case CIPHER_TYPE_AES128: + *spu2_type = SPU2_HASH_TYPE_AES128; + break; + case CIPHER_TYPE_AES192: + *spu2_type = SPU2_HASH_TYPE_AES192; + break; + case CIPHER_TYPE_AES256: + *spu2_type = SPU2_HASH_TYPE_AES256; + break; + default: + err = -EINVAL; + } + break; + case HASH_ALG_SHA3_224: + *spu2_type = SPU2_HASH_TYPE_SHA3_224; + break; + case HASH_ALG_SHA3_256: + *spu2_type = SPU2_HASH_TYPE_SHA3_256; + break; + case HASH_ALG_SHA3_384: + *spu2_type = SPU2_HASH_TYPE_SHA3_384; + break; + case HASH_ALG_SHA3_512: + *spu2_type = SPU2_HASH_TYPE_SHA3_512; + break; + case HASH_ALG_LAST: + default: + err = -EINVAL; + break; + } + + if (err) + flow_log("Invalid hash alg %d or type %d\n", + hash_alg, hash_type); + return err; +} + +/* Dump FMD ctrl0. The ctrl0 input is in host byte order */ +static void spu2_dump_fmd_ctrl0(u64 ctrl0) +{ + enum spu2_cipher_type ciph_type; + enum spu2_cipher_mode ciph_mode; + enum spu2_hash_type hash_type; + enum spu2_hash_mode hash_mode; + char *ciph_name; + char *ciph_mode_name; + char *hash_name; + char *hash_mode_name; + u8 cfb; + u8 proto; + + packet_log(" FMD CTRL0 %#16llx\n", ctrl0); + if (ctrl0 & SPU2_CIPH_ENCRYPT_EN) + packet_log(" encrypt\n"); + else + packet_log(" decrypt\n"); + + ciph_type = (ctrl0 & SPU2_CIPH_TYPE) >> SPU2_CIPH_TYPE_SHIFT; + ciph_name = spu2_ciph_type_name(ciph_type); + packet_log(" Cipher type: %s\n", ciph_name); + + if (ciph_type != SPU2_CIPHER_TYPE_NONE) { + ciph_mode = (ctrl0 & SPU2_CIPH_MODE) >> SPU2_CIPH_MODE_SHIFT; + ciph_mode_name = spu2_ciph_mode_name(ciph_mode); + packet_log(" Cipher mode: %s\n", ciph_mode_name); + } + + cfb = (ctrl0 & SPU2_CFB_MASK) >> SPU2_CFB_MASK_SHIFT; + packet_log(" CFB %#x\n", cfb); + + proto = (ctrl0 & SPU2_PROTO_SEL) >> SPU2_PROTO_SEL_SHIFT; + packet_log(" protocol %#x\n", proto); + + if (ctrl0 & SPU2_HASH_FIRST) + packet_log(" hash first\n"); + else + packet_log(" cipher first\n"); + + if (ctrl0 & SPU2_CHK_TAG) + packet_log(" check tag\n"); + + hash_type = (ctrl0 & SPU2_HASH_TYPE) >> SPU2_HASH_TYPE_SHIFT; + hash_name = spu2_hash_type_name(hash_type); + packet_log(" Hash type: %s\n", hash_name); + + if (hash_type != SPU2_HASH_TYPE_NONE) { + hash_mode = (ctrl0 & SPU2_HASH_MODE) >> SPU2_HASH_MODE_SHIFT; + hash_mode_name = spu2_hash_mode_name(hash_mode); + packet_log(" Hash mode: %s\n", hash_mode_name); + } + + if (ctrl0 & SPU2_CIPH_PAD_EN) { + packet_log(" Cipher pad: %#2llx\n", + (ctrl0 & SPU2_CIPH_PAD) >> SPU2_CIPH_PAD_SHIFT); + } +} + +/* Dump FMD ctrl1. The ctrl1 input is in host byte order */ +static void spu2_dump_fmd_ctrl1(u64 ctrl1) +{ + u8 hash_key_len; + u8 ciph_key_len; + u8 ret_iv_len; + u8 iv_offset; + u8 iv_len; + u8 hash_tag_len; + u8 ret_md; + + packet_log(" FMD CTRL1 %#16llx\n", ctrl1); + if (ctrl1 & SPU2_TAG_LOC) + packet_log(" Tag after payload\n"); + + packet_log(" Msg includes "); + if (ctrl1 & SPU2_HAS_FR_DATA) + packet_log("FD "); + if (ctrl1 & SPU2_HAS_AAD1) + packet_log("AAD1 "); + if (ctrl1 & SPU2_HAS_NAAD) + packet_log("NAAD "); + if (ctrl1 & SPU2_HAS_AAD2) + packet_log("AAD2 "); + if (ctrl1 & SPU2_HAS_ESN) + packet_log("ESN "); + packet_log("\n"); + + hash_key_len = (ctrl1 & SPU2_HASH_KEY_LEN) >> SPU2_HASH_KEY_LEN_SHIFT; + packet_log(" Hash key len %u\n", hash_key_len); + + ciph_key_len = (ctrl1 & SPU2_CIPH_KEY_LEN) >> SPU2_CIPH_KEY_LEN_SHIFT; + packet_log(" Cipher key len %u\n", ciph_key_len); + + if (ctrl1 & SPU2_GENIV) + packet_log(" Generate IV\n"); + + if (ctrl1 & SPU2_HASH_IV) + packet_log(" IV included in hash\n"); + + if (ctrl1 & SPU2_RET_IV) + packet_log(" Return IV in output before payload\n"); + + ret_iv_len = (ctrl1 & SPU2_RET_IV_LEN) >> SPU2_RET_IV_LEN_SHIFT; + packet_log(" Length of returned IV %u bytes\n", + ret_iv_len ? ret_iv_len : 16); + + iv_offset = (ctrl1 & SPU2_IV_OFFSET) >> SPU2_IV_OFFSET_SHIFT; + packet_log(" IV offset %u\n", iv_offset); + + iv_len = (ctrl1 & SPU2_IV_LEN) >> SPU2_IV_LEN_SHIFT; + packet_log(" Input IV len %u bytes\n", iv_len); + + hash_tag_len = (ctrl1 & SPU2_HASH_TAG_LEN) >> SPU2_HASH_TAG_LEN_SHIFT; + packet_log(" Hash tag length %u bytes\n", hash_tag_len); + + packet_log(" Return "); + ret_md = (ctrl1 & SPU2_RETURN_MD) >> SPU2_RETURN_MD_SHIFT; + if (ret_md) + packet_log("FMD "); + if (ret_md == SPU2_RET_FMD_OMD) + packet_log("OMD "); + else if (ret_md == SPU2_RET_FMD_OMD_IV) + packet_log("OMD IV "); + if (ctrl1 & SPU2_RETURN_FD) + packet_log("FD "); + if (ctrl1 & SPU2_RETURN_AAD1) + packet_log("AAD1 "); + if (ctrl1 & SPU2_RETURN_NAAD) + packet_log("NAAD "); + if (ctrl1 & SPU2_RETURN_AAD2) + packet_log("AAD2 "); + if (ctrl1 & SPU2_RETURN_PAY) + packet_log("Payload"); + packet_log("\n"); +} + +/* Dump FMD ctrl2. The ctrl2 input is in host byte order */ +static void spu2_dump_fmd_ctrl2(u64 ctrl2) +{ + packet_log(" FMD CTRL2 %#16llx\n", ctrl2); + + packet_log(" AAD1 offset %llu length %llu bytes\n", + ctrl2 & SPU2_AAD1_OFFSET, + (ctrl2 & SPU2_AAD1_LEN) >> SPU2_AAD1_LEN_SHIFT); + packet_log(" AAD2 offset %llu\n", + (ctrl2 & SPU2_AAD2_OFFSET) >> SPU2_AAD2_OFFSET_SHIFT); + packet_log(" Payload offset %llu\n", + (ctrl2 & SPU2_PL_OFFSET) >> SPU2_PL_OFFSET_SHIFT); +} + +/* Dump FMD ctrl3. The ctrl3 input is in host byte order */ +static void spu2_dump_fmd_ctrl3(u64 ctrl3) +{ + packet_log(" FMD CTRL3 %#16llx\n", ctrl3); + + packet_log(" Payload length %llu bytes\n", ctrl3 & SPU2_PL_LEN); + packet_log(" TLS length %llu bytes\n", + (ctrl3 & SPU2_TLS_LEN) >> SPU2_TLS_LEN_SHIFT); +} + +static void spu2_dump_fmd(struct SPU2_FMD *fmd) +{ + spu2_dump_fmd_ctrl0(le64_to_cpu(fmd->ctrl0)); + spu2_dump_fmd_ctrl1(le64_to_cpu(fmd->ctrl1)); + spu2_dump_fmd_ctrl2(le64_to_cpu(fmd->ctrl2)); + spu2_dump_fmd_ctrl3(le64_to_cpu(fmd->ctrl3)); +} + +static void spu2_dump_omd(u8 *omd, u16 hash_key_len, u16 ciph_key_len, + u16 hash_iv_len, u16 ciph_iv_len) +{ + u8 *ptr = omd; + + packet_log(" OMD:\n"); + + if (hash_key_len) { + packet_log(" Hash Key Length %u bytes\n", hash_key_len); + packet_dump(" KEY: ", ptr, hash_key_len); + ptr += hash_key_len; + } + + if (ciph_key_len) { + packet_log(" Cipher Key Length %u bytes\n", ciph_key_len); + packet_dump(" KEY: ", ptr, ciph_key_len); + ptr += ciph_key_len; + } + + if (hash_iv_len) { + packet_log(" Hash IV Length %u bytes\n", hash_iv_len); + packet_dump(" hash IV: ", ptr, hash_iv_len); + ptr += ciph_key_len; + } + + if (ciph_iv_len) { + packet_log(" Cipher IV Length %u bytes\n", ciph_iv_len); + packet_dump(" cipher IV: ", ptr, ciph_iv_len); + } +} + +/* Dump a SPU2 header for debug */ +void spu2_dump_msg_hdr(u8 *buf, unsigned int buf_len) +{ + struct SPU2_FMD *fmd = (struct SPU2_FMD *)buf; + u8 *omd; + u64 ctrl1; + u16 hash_key_len; + u16 ciph_key_len; + u16 hash_iv_len; + u16 ciph_iv_len; + u16 omd_len; + + packet_log("\n"); + packet_log("SPU2 message header %p len: %u\n", buf, buf_len); + + spu2_dump_fmd(fmd); + omd = (u8 *)(fmd + 1); + + ctrl1 = le64_to_cpu(fmd->ctrl1); + hash_key_len = (ctrl1 & SPU2_HASH_KEY_LEN) >> SPU2_HASH_KEY_LEN_SHIFT; + ciph_key_len = (ctrl1 & SPU2_CIPH_KEY_LEN) >> SPU2_CIPH_KEY_LEN_SHIFT; + hash_iv_len = 0; + ciph_iv_len = (ctrl1 & SPU2_IV_LEN) >> SPU2_IV_LEN_SHIFT; + spu2_dump_omd(omd, hash_key_len, ciph_key_len, hash_iv_len, + ciph_iv_len); + + /* Double check sanity */ + omd_len = hash_key_len + ciph_key_len + hash_iv_len + ciph_iv_len; + if (FMD_SIZE + omd_len != buf_len) { + packet_log + (" Packet parsed incorrectly. buf_len %u, sum of MD %zu\n", + buf_len, FMD_SIZE + omd_len); + } + packet_log("\n"); +} + +/** + * spu2_fmd_init() - At setkey time, initialize the fixed meta data for + * subsequent skcipher requests for this context. + * @fmd: Start of FMD field to be written + * @spu2_type: Cipher algorithm + * @spu2_mode: Cipher mode + * @cipher_key_len: Length of cipher key, in bytes + * @cipher_iv_len: Length of cipher initialization vector, in bytes + * + * Return: 0 (success) + */ +static int spu2_fmd_init(struct SPU2_FMD *fmd, + enum spu2_cipher_type spu2_type, + enum spu2_cipher_mode spu2_mode, + u32 cipher_key_len, u32 cipher_iv_len) +{ + u64 ctrl0; + u64 ctrl1; + u64 ctrl2; + u64 ctrl3; + u32 aad1_offset; + u32 aad2_offset; + u16 aad1_len = 0; + u64 payload_offset; + + ctrl0 = (spu2_type << SPU2_CIPH_TYPE_SHIFT) | + (spu2_mode << SPU2_CIPH_MODE_SHIFT); + + ctrl1 = (cipher_key_len << SPU2_CIPH_KEY_LEN_SHIFT) | + ((u64)cipher_iv_len << SPU2_IV_LEN_SHIFT) | + ((u64)SPU2_RET_FMD_ONLY << SPU2_RETURN_MD_SHIFT) | SPU2_RETURN_PAY; + + /* + * AAD1 offset is from start of FD. FD length is always 0 for this + * driver. So AAD1_offset is always 0. + */ + aad1_offset = 0; + aad2_offset = aad1_offset; + payload_offset = 0; + ctrl2 = aad1_offset | + (aad1_len << SPU2_AAD1_LEN_SHIFT) | + (aad2_offset << SPU2_AAD2_OFFSET_SHIFT) | + (payload_offset << SPU2_PL_OFFSET_SHIFT); + + ctrl3 = 0; + + fmd->ctrl0 = cpu_to_le64(ctrl0); + fmd->ctrl1 = cpu_to_le64(ctrl1); + fmd->ctrl2 = cpu_to_le64(ctrl2); + fmd->ctrl3 = cpu_to_le64(ctrl3); + + return 0; +} + +/** + * spu2_fmd_ctrl0_write() - Write ctrl0 field in fixed metadata (FMD) field of + * SPU request packet. + * @fmd: Start of FMD field to be written + * @is_inbound: true if decrypting. false if encrypting. + * @auth_first: true if alg authenticates before encrypting + * @protocol: protocol selector + * @cipher_type: cipher algorithm + * @cipher_mode: cipher mode + * @auth_type: authentication type + * @auth_mode: authentication mode + */ +static void spu2_fmd_ctrl0_write(struct SPU2_FMD *fmd, + bool is_inbound, bool auth_first, + enum spu2_proto_sel protocol, + enum spu2_cipher_type cipher_type, + enum spu2_cipher_mode cipher_mode, + enum spu2_hash_type auth_type, + enum spu2_hash_mode auth_mode) +{ + u64 ctrl0 = 0; + + if ((cipher_type != SPU2_CIPHER_TYPE_NONE) && !is_inbound) + ctrl0 |= SPU2_CIPH_ENCRYPT_EN; + + ctrl0 |= ((u64)cipher_type << SPU2_CIPH_TYPE_SHIFT) | + ((u64)cipher_mode << SPU2_CIPH_MODE_SHIFT); + + if (protocol) + ctrl0 |= (u64)protocol << SPU2_PROTO_SEL_SHIFT; + + if (auth_first) + ctrl0 |= SPU2_HASH_FIRST; + + if (is_inbound && (auth_type != SPU2_HASH_TYPE_NONE)) + ctrl0 |= SPU2_CHK_TAG; + + ctrl0 |= (((u64)auth_type << SPU2_HASH_TYPE_SHIFT) | + ((u64)auth_mode << SPU2_HASH_MODE_SHIFT)); + + fmd->ctrl0 = cpu_to_le64(ctrl0); +} + +/** + * spu2_fmd_ctrl1_write() - Write ctrl1 field in fixed metadata (FMD) field of + * SPU request packet. + * @fmd: Start of FMD field to be written + * @is_inbound: true if decrypting. false if encrypting. + * @assoc_size: Length of additional associated data, in bytes + * @auth_key_len: Length of authentication key, in bytes + * @cipher_key_len: Length of cipher key, in bytes + * @gen_iv: If true, hw generates IV and returns in response + * @hash_iv: IV participates in hash. Used for IPSEC and TLS. + * @return_iv: Return IV in output packet before payload + * @ret_iv_len: Length of IV returned from SPU, in bytes + * @ret_iv_offset: Offset into full IV of start of returned IV + * @cipher_iv_len: Length of input cipher IV, in bytes + * @digest_size: Length of digest (aka, hash tag or ICV), in bytes + * @return_payload: Return payload in SPU response + * @return_md : return metadata in SPU response + * + * Packet can have AAD2 w/o AAD1. For algorithms currently supported, + * associated data goes in AAD2. + */ +static void spu2_fmd_ctrl1_write(struct SPU2_FMD *fmd, bool is_inbound, + u64 assoc_size, + u64 auth_key_len, u64 cipher_key_len, + bool gen_iv, bool hash_iv, bool return_iv, + u64 ret_iv_len, u64 ret_iv_offset, + u64 cipher_iv_len, u64 digest_size, + bool return_payload, bool return_md) +{ + u64 ctrl1 = 0; + + if (is_inbound && digest_size) + ctrl1 |= SPU2_TAG_LOC; + + if (assoc_size) { + ctrl1 |= SPU2_HAS_AAD2; + ctrl1 |= SPU2_RETURN_AAD2; /* need aad2 for gcm aes esp */ + } + + if (auth_key_len) + ctrl1 |= ((auth_key_len << SPU2_HASH_KEY_LEN_SHIFT) & + SPU2_HASH_KEY_LEN); + + if (cipher_key_len) + ctrl1 |= ((cipher_key_len << SPU2_CIPH_KEY_LEN_SHIFT) & + SPU2_CIPH_KEY_LEN); + + if (gen_iv) + ctrl1 |= SPU2_GENIV; + + if (hash_iv) + ctrl1 |= SPU2_HASH_IV; + + if (return_iv) { + ctrl1 |= SPU2_RET_IV; + ctrl1 |= ret_iv_len << SPU2_RET_IV_LEN_SHIFT; + ctrl1 |= ret_iv_offset << SPU2_IV_OFFSET_SHIFT; + } + + ctrl1 |= ((cipher_iv_len << SPU2_IV_LEN_SHIFT) & SPU2_IV_LEN); + + if (digest_size) + ctrl1 |= ((digest_size << SPU2_HASH_TAG_LEN_SHIFT) & + SPU2_HASH_TAG_LEN); + + /* Let's ask for the output pkt to include FMD, but don't need to + * get keys and IVs back in OMD. + */ + if (return_md) + ctrl1 |= ((u64)SPU2_RET_FMD_ONLY << SPU2_RETURN_MD_SHIFT); + else + ctrl1 |= ((u64)SPU2_RET_NO_MD << SPU2_RETURN_MD_SHIFT); + + /* Crypto API does not get assoc data back. So no need for AAD2. */ + + if (return_payload) + ctrl1 |= SPU2_RETURN_PAY; + + fmd->ctrl1 = cpu_to_le64(ctrl1); +} + +/** + * spu2_fmd_ctrl2_write() - Set the ctrl2 field in the fixed metadata field of + * SPU2 header. + * @fmd: Start of FMD field to be written + * @cipher_offset: Number of bytes from Start of Packet (end of FD field) where + * data to be encrypted or decrypted begins + * @auth_key_len: Length of authentication key, in bytes + * @auth_iv_len: Length of authentication initialization vector, in bytes + * @cipher_key_len: Length of cipher key, in bytes + * @cipher_iv_len: Length of cipher IV, in bytes + */ +static void spu2_fmd_ctrl2_write(struct SPU2_FMD *fmd, u64 cipher_offset, + u64 auth_key_len, u64 auth_iv_len, + u64 cipher_key_len, u64 cipher_iv_len) +{ + u64 ctrl2; + u64 aad1_offset; + u64 aad2_offset; + u16 aad1_len = 0; + u64 payload_offset; + + /* AAD1 offset is from start of FD. FD length always 0. */ + aad1_offset = 0; + + aad2_offset = aad1_offset; + payload_offset = cipher_offset; + ctrl2 = aad1_offset | + (aad1_len << SPU2_AAD1_LEN_SHIFT) | + (aad2_offset << SPU2_AAD2_OFFSET_SHIFT) | + (payload_offset << SPU2_PL_OFFSET_SHIFT); + + fmd->ctrl2 = cpu_to_le64(ctrl2); +} + +/** + * spu2_fmd_ctrl3_write() - Set the ctrl3 field in FMD + * @fmd: Fixed meta data. First field in SPU2 msg header. + * @payload_len: Length of payload, in bytes + */ +static void spu2_fmd_ctrl3_write(struct SPU2_FMD *fmd, u64 payload_len) +{ + u64 ctrl3; + + ctrl3 = payload_len & SPU2_PL_LEN; + + fmd->ctrl3 = cpu_to_le64(ctrl3); +} + +/** + * spu2_ctx_max_payload() - Determine the maximum length of the payload for a + * SPU message for a given cipher and hash alg context. + * @cipher_alg: The cipher algorithm + * @cipher_mode: The cipher mode + * @blocksize: The size of a block of data for this algo + * + * For SPU2, the hardware generally ignores the PayloadLen field in ctrl3 of + * FMD and just keeps computing until it receives a DMA descriptor with the EOF + * flag set. So we consider the max payload to be infinite. AES CCM is an + * exception. + * + * Return: Max payload length in bytes + */ +u32 spu2_ctx_max_payload(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize) +{ + if ((cipher_alg == CIPHER_ALG_AES) && + (cipher_mode == CIPHER_MODE_CCM)) { + u32 excess = SPU2_MAX_PAYLOAD % blocksize; + + return SPU2_MAX_PAYLOAD - excess; + } else { + return SPU_MAX_PAYLOAD_INF; + } +} + +/** + * spu2_payload_length() - Given a SPU2 message header, extract the payload + * length. + * @spu_hdr: Start of SPU message header (FMD) + * + * Return: payload length, in bytes + */ +u32 spu2_payload_length(u8 *spu_hdr) +{ + struct SPU2_FMD *fmd = (struct SPU2_FMD *)spu_hdr; + u32 pl_len; + u64 ctrl3; + + ctrl3 = le64_to_cpu(fmd->ctrl3); + pl_len = ctrl3 & SPU2_PL_LEN; + + return pl_len; +} + +/** + * spu2_response_hdr_len() - Determine the expected length of a SPU response + * header. + * @auth_key_len: Length of authentication key, in bytes + * @enc_key_len: Length of encryption key, in bytes + * @is_hash: Unused + * + * For SPU2, includes just FMD. OMD is never requested. + * + * Return: Length of FMD, in bytes + */ +u16 spu2_response_hdr_len(u16 auth_key_len, u16 enc_key_len, bool is_hash) +{ + return FMD_SIZE; +} + +/** + * spu2_hash_pad_len() - Calculate the length of hash padding required to extend + * data to a full block size. + * @hash_alg: hash algorithm + * @hash_mode: hash mode + * @chunksize: length of data, in bytes + * @hash_block_size: size of a hash block, in bytes + * + * SPU2 hardware does all hash padding + * + * Return: length of hash pad in bytes + */ +u16 spu2_hash_pad_len(enum hash_alg hash_alg, enum hash_mode hash_mode, + u32 chunksize, u16 hash_block_size) +{ + return 0; +} + +/** + * spu2_gcm_ccm_pad_len() - Determine the length of GCM/CCM padding for either + * the AAD field or the data. + * @cipher_mode: Unused + * @data_size: Unused + * + * Return: 0. Unlike SPU-M, SPU2 hardware does any GCM/CCM padding required. + */ +u32 spu2_gcm_ccm_pad_len(enum spu_cipher_mode cipher_mode, + unsigned int data_size) +{ + return 0; +} + +/** + * spu2_assoc_resp_len() - Determine the size of the AAD2 buffer needed to catch + * associated data in a SPU2 output packet. + * @cipher_mode: cipher mode + * @assoc_len: length of additional associated data, in bytes + * @iv_len: length of initialization vector, in bytes + * @is_encrypt: true if encrypting. false if decrypt. + * + * Return: Length of buffer to catch associated data in response + */ +u32 spu2_assoc_resp_len(enum spu_cipher_mode cipher_mode, + unsigned int assoc_len, unsigned int iv_len, + bool is_encrypt) +{ + u32 resp_len = assoc_len; + + if (is_encrypt) + /* gcm aes esp has to write 8-byte IV in response */ + resp_len += iv_len; + return resp_len; +} + +/** + * spu2_aead_ivlen() - Calculate the length of the AEAD IV to be included + * in a SPU request after the AAD and before the payload. + * @cipher_mode: cipher mode + * @iv_len: initialization vector length in bytes + * + * For SPU2, AEAD IV is included in OMD and does not need to be repeated + * prior to the payload. + * + * Return: Length of AEAD IV in bytes + */ +u8 spu2_aead_ivlen(enum spu_cipher_mode cipher_mode, u16 iv_len) +{ + return 0; +} + +/** + * spu2_hash_type() - Determine the type of hash operation. + * @src_sent: The number of bytes in the current request that have already + * been sent to the SPU to be hashed. + * + * SPU2 always does a FULL hash operation + */ +enum hash_type spu2_hash_type(u32 src_sent) +{ + return HASH_TYPE_FULL; +} + +/** + * spu2_digest_size() - Determine the size of a hash digest to expect the SPU to + * return. + * @alg_digest_size: Number of bytes in the final digest for the given algo + * @alg: The hash algorithm + * @htype: Type of hash operation (init, update, full, etc) + * + */ +u32 spu2_digest_size(u32 alg_digest_size, enum hash_alg alg, + enum hash_type htype) +{ + return alg_digest_size; +} + +/** + * spu2_create_request() - Build a SPU2 request message header, includint FMD and + * OMD. + * @spu_hdr: Start of buffer where SPU request header is to be written + * @req_opts: SPU request message options + * @cipher_parms: Parameters related to cipher algorithm + * @hash_parms: Parameters related to hash algorithm + * @aead_parms: Parameters related to AEAD operation + * @data_size: Length of data to be encrypted or authenticated. If AEAD, does + * not include length of AAD. + * + * Construct the message starting at spu_hdr. Caller should allocate this buffer + * in DMA-able memory at least SPU_HEADER_ALLOC_LEN bytes long. + * + * Return: the length of the SPU header in bytes. 0 if an error occurs. + */ +u32 spu2_create_request(u8 *spu_hdr, + struct spu_request_opts *req_opts, + struct spu_cipher_parms *cipher_parms, + struct spu_hash_parms *hash_parms, + struct spu_aead_parms *aead_parms, + unsigned int data_size) +{ + struct SPU2_FMD *fmd; + u8 *ptr; + unsigned int buf_len; + int err; + enum spu2_cipher_type spu2_ciph_type = SPU2_CIPHER_TYPE_NONE; + enum spu2_cipher_mode spu2_ciph_mode; + enum spu2_hash_type spu2_auth_type = SPU2_HASH_TYPE_NONE; + enum spu2_hash_mode spu2_auth_mode; + bool return_md = true; + enum spu2_proto_sel proto = SPU2_PROTO_RESV; + + /* size of the payload */ + unsigned int payload_len = + hash_parms->prebuf_len + data_size + hash_parms->pad_len - + ((req_opts->is_aead && req_opts->is_inbound) ? + hash_parms->digestsize : 0); + + /* offset of prebuf or data from start of AAD2 */ + unsigned int cipher_offset = aead_parms->assoc_size + + aead_parms->aad_pad_len + aead_parms->iv_len; + + /* total size of the data following OMD (without STAT word padding) */ + unsigned int real_db_size = spu_real_db_size(aead_parms->assoc_size, + aead_parms->iv_len, + hash_parms->prebuf_len, + data_size, + aead_parms->aad_pad_len, + aead_parms->data_pad_len, + hash_parms->pad_len); + unsigned int assoc_size = aead_parms->assoc_size; + + if (req_opts->is_aead && + (cipher_parms->alg == CIPHER_ALG_AES) && + (cipher_parms->mode == CIPHER_MODE_GCM)) + /* + * On SPU 2, aes gcm cipher first on encrypt, auth first on + * decrypt + */ + req_opts->auth_first = req_opts->is_inbound; + + /* and do opposite for ccm (auth 1st on encrypt) */ + if (req_opts->is_aead && + (cipher_parms->alg == CIPHER_ALG_AES) && + (cipher_parms->mode == CIPHER_MODE_CCM)) + req_opts->auth_first = !req_opts->is_inbound; + + flow_log("%s()\n", __func__); + flow_log(" in:%u authFirst:%u\n", + req_opts->is_inbound, req_opts->auth_first); + flow_log(" cipher alg:%u mode:%u type %u\n", cipher_parms->alg, + cipher_parms->mode, cipher_parms->type); + flow_log(" is_esp: %s\n", req_opts->is_esp ? "yes" : "no"); + flow_log(" key: %d\n", cipher_parms->key_len); + flow_dump(" key: ", cipher_parms->key_buf, cipher_parms->key_len); + flow_log(" iv: %d\n", cipher_parms->iv_len); + flow_dump(" iv: ", cipher_parms->iv_buf, cipher_parms->iv_len); + flow_log(" auth alg:%u mode:%u type %u\n", + hash_parms->alg, hash_parms->mode, hash_parms->type); + flow_log(" digestsize: %u\n", hash_parms->digestsize); + flow_log(" authkey: %d\n", hash_parms->key_len); + flow_dump(" authkey: ", hash_parms->key_buf, hash_parms->key_len); + flow_log(" assoc_size:%u\n", assoc_size); + flow_log(" prebuf_len:%u\n", hash_parms->prebuf_len); + flow_log(" data_size:%u\n", data_size); + flow_log(" hash_pad_len:%u\n", hash_parms->pad_len); + flow_log(" real_db_size:%u\n", real_db_size); + flow_log(" cipher_offset:%u payload_len:%u\n", + cipher_offset, payload_len); + flow_log(" aead_iv: %u\n", aead_parms->iv_len); + + /* Convert to spu2 values for cipher alg, hash alg */ + err = spu2_cipher_xlate(cipher_parms->alg, cipher_parms->mode, + cipher_parms->type, + &spu2_ciph_type, &spu2_ciph_mode); + + /* If we are doing GCM hashing only - either via rfc4543 transform + * or because we happen to do GCM with AAD only and no payload - we + * need to configure hardware to use hash key rather than cipher key + * and put data into payload. This is because unlike SPU-M, running + * GCM cipher with 0 size payload is not permitted. + */ + if ((req_opts->is_rfc4543) || + ((spu2_ciph_mode == SPU2_CIPHER_MODE_GCM) && + (payload_len == 0))) { + /* Use hashing (only) and set up hash key */ + spu2_ciph_type = SPU2_CIPHER_TYPE_NONE; + hash_parms->key_len = cipher_parms->key_len; + memcpy(hash_parms->key_buf, cipher_parms->key_buf, + cipher_parms->key_len); + cipher_parms->key_len = 0; + + if (req_opts->is_rfc4543) + payload_len += assoc_size; + else + payload_len = assoc_size; + cipher_offset = 0; + assoc_size = 0; + } + + if (err) + return 0; + + flow_log("spu2 cipher type %s, cipher mode %s\n", + spu2_ciph_type_name(spu2_ciph_type), + spu2_ciph_mode_name(spu2_ciph_mode)); + + err = spu2_hash_xlate(hash_parms->alg, hash_parms->mode, + hash_parms->type, + cipher_parms->type, + &spu2_auth_type, &spu2_auth_mode); + if (err) + return 0; + + flow_log("spu2 hash type %s, hash mode %s\n", + spu2_hash_type_name(spu2_auth_type), + spu2_hash_mode_name(spu2_auth_mode)); + + fmd = (struct SPU2_FMD *)spu_hdr; + + spu2_fmd_ctrl0_write(fmd, req_opts->is_inbound, req_opts->auth_first, + proto, spu2_ciph_type, spu2_ciph_mode, + spu2_auth_type, spu2_auth_mode); + + spu2_fmd_ctrl1_write(fmd, req_opts->is_inbound, assoc_size, + hash_parms->key_len, cipher_parms->key_len, + false, false, + aead_parms->return_iv, aead_parms->ret_iv_len, + aead_parms->ret_iv_off, + cipher_parms->iv_len, hash_parms->digestsize, + !req_opts->bd_suppress, return_md); + + spu2_fmd_ctrl2_write(fmd, cipher_offset, hash_parms->key_len, 0, + cipher_parms->key_len, cipher_parms->iv_len); + + spu2_fmd_ctrl3_write(fmd, payload_len); + + ptr = (u8 *)(fmd + 1); + buf_len = sizeof(struct SPU2_FMD); + + /* Write OMD */ + if (hash_parms->key_len) { + memcpy(ptr, hash_parms->key_buf, hash_parms->key_len); + ptr += hash_parms->key_len; + buf_len += hash_parms->key_len; + } + if (cipher_parms->key_len) { + memcpy(ptr, cipher_parms->key_buf, cipher_parms->key_len); + ptr += cipher_parms->key_len; + buf_len += cipher_parms->key_len; + } + if (cipher_parms->iv_len) { + memcpy(ptr, cipher_parms->iv_buf, cipher_parms->iv_len); + ptr += cipher_parms->iv_len; + buf_len += cipher_parms->iv_len; + } + + packet_dump(" SPU request header: ", spu_hdr, buf_len); + + return buf_len; +} + +/** + * spu2_cipher_req_init() - Build an skcipher SPU2 request message header, + * including FMD and OMD. + * @spu_hdr: Location of start of SPU request (FMD field) + * @cipher_parms: Parameters describing cipher request + * + * Called at setkey time to initialize a msg header that can be reused for all + * subsequent skcipher requests. Construct the message starting at spu_hdr. + * Caller should allocate this buffer in DMA-able memory at least + * SPU_HEADER_ALLOC_LEN bytes long. + * + * Return: the total length of the SPU header (FMD and OMD) in bytes. 0 if an + * error occurs. + */ +u16 spu2_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms) +{ + struct SPU2_FMD *fmd; + u8 *omd; + enum spu2_cipher_type spu2_type = SPU2_CIPHER_TYPE_NONE; + enum spu2_cipher_mode spu2_mode; + int err; + + flow_log("%s()\n", __func__); + flow_log(" cipher alg:%u mode:%u type %u\n", cipher_parms->alg, + cipher_parms->mode, cipher_parms->type); + flow_log(" cipher_iv_len: %u\n", cipher_parms->iv_len); + flow_log(" key: %d\n", cipher_parms->key_len); + flow_dump(" key: ", cipher_parms->key_buf, cipher_parms->key_len); + + /* Convert to spu2 values */ + err = spu2_cipher_xlate(cipher_parms->alg, cipher_parms->mode, + cipher_parms->type, &spu2_type, &spu2_mode); + if (err) + return 0; + + flow_log("spu2 cipher type %s, cipher mode %s\n", + spu2_ciph_type_name(spu2_type), + spu2_ciph_mode_name(spu2_mode)); + + /* Construct the FMD header */ + fmd = (struct SPU2_FMD *)spu_hdr; + err = spu2_fmd_init(fmd, spu2_type, spu2_mode, cipher_parms->key_len, + cipher_parms->iv_len); + if (err) + return 0; + + /* Write cipher key to OMD */ + omd = (u8 *)(fmd + 1); + if (cipher_parms->key_buf && cipher_parms->key_len) + memcpy(omd, cipher_parms->key_buf, cipher_parms->key_len); + + packet_dump(" SPU request header: ", spu_hdr, + FMD_SIZE + cipher_parms->key_len + cipher_parms->iv_len); + + return FMD_SIZE + cipher_parms->key_len + cipher_parms->iv_len; +} + +/** + * spu2_cipher_req_finish() - Finish building a SPU request message header for a + * block cipher request. + * @spu_hdr: Start of the request message header (MH field) + * @spu_req_hdr_len: Length in bytes of the SPU request header + * @is_inbound: 0 encrypt, 1 decrypt + * @cipher_parms: Parameters describing cipher operation to be performed + * @data_size: Length of the data in the BD field + * + * Assumes much of the header was already filled in at setkey() time in + * spu_cipher_req_init(). + * spu_cipher_req_init() fills in the encryption key. + */ +void spu2_cipher_req_finish(u8 *spu_hdr, + u16 spu_req_hdr_len, + unsigned int is_inbound, + struct spu_cipher_parms *cipher_parms, + unsigned int data_size) +{ + struct SPU2_FMD *fmd; + u8 *omd; /* start of optional metadata */ + u64 ctrl0; + u64 ctrl3; + + flow_log("%s()\n", __func__); + flow_log(" in: %u\n", is_inbound); + flow_log(" cipher alg: %u, cipher_type: %u\n", cipher_parms->alg, + cipher_parms->type); + flow_log(" iv len: %d\n", cipher_parms->iv_len); + flow_dump(" iv: ", cipher_parms->iv_buf, cipher_parms->iv_len); + flow_log(" data_size: %u\n", data_size); + + fmd = (struct SPU2_FMD *)spu_hdr; + omd = (u8 *)(fmd + 1); + + /* + * FMD ctrl0 was initialized at setkey time. update it to indicate + * whether we are encrypting or decrypting. + */ + ctrl0 = le64_to_cpu(fmd->ctrl0); + if (is_inbound) + ctrl0 &= ~SPU2_CIPH_ENCRYPT_EN; /* decrypt */ + else + ctrl0 |= SPU2_CIPH_ENCRYPT_EN; /* encrypt */ + fmd->ctrl0 = cpu_to_le64(ctrl0); + + if (cipher_parms->alg && cipher_parms->iv_buf && cipher_parms->iv_len) { + /* cipher iv provided so put it in here */ + memcpy(omd + cipher_parms->key_len, cipher_parms->iv_buf, + cipher_parms->iv_len); + } + + ctrl3 = le64_to_cpu(fmd->ctrl3); + data_size &= SPU2_PL_LEN; + ctrl3 |= data_size; + fmd->ctrl3 = cpu_to_le64(ctrl3); + + packet_dump(" SPU request header: ", spu_hdr, spu_req_hdr_len); +} + +/** + * spu2_request_pad() - Create pad bytes at the end of the data. + * @pad_start: Start of buffer where pad bytes are to be written + * @gcm_padding: Length of GCM padding, in bytes + * @hash_pad_len: Number of bytes of padding extend data to full block + * @auth_alg: Authentication algorithm + * @auth_mode: Authentication mode + * @total_sent: Length inserted at end of hash pad + * @status_padding: Number of bytes of padding to align STATUS word + * + * There may be three forms of pad: + * 1. GCM pad - for GCM mode ciphers, pad to 16-byte alignment + * 2. hash pad - pad to a block length, with 0x80 data terminator and + * size at the end + * 3. STAT pad - to ensure the STAT field is 4-byte aligned + */ +void spu2_request_pad(u8 *pad_start, u32 gcm_padding, u32 hash_pad_len, + enum hash_alg auth_alg, enum hash_mode auth_mode, + unsigned int total_sent, u32 status_padding) +{ + u8 *ptr = pad_start; + + /* fix data alignent for GCM */ + if (gcm_padding > 0) { + flow_log(" GCM: padding to 16 byte alignment: %u bytes\n", + gcm_padding); + memset(ptr, 0, gcm_padding); + ptr += gcm_padding; + } + + if (hash_pad_len > 0) { + /* clear the padding section */ + memset(ptr, 0, hash_pad_len); + + /* terminate the data */ + *ptr = 0x80; + ptr += (hash_pad_len - sizeof(u64)); + + /* add the size at the end as required per alg */ + if (auth_alg == HASH_ALG_MD5) + *(__le64 *)ptr = cpu_to_le64(total_sent * 8ull); + else /* SHA1, SHA2-224, SHA2-256 */ + *(__be64 *)ptr = cpu_to_be64(total_sent * 8ull); + ptr += sizeof(u64); + } + + /* pad to a 4byte alignment for STAT */ + if (status_padding > 0) { + flow_log(" STAT: padding to 4 byte alignment: %u bytes\n", + status_padding); + + memset(ptr, 0, status_padding); + ptr += status_padding; + } +} + +/** + * spu2_xts_tweak_in_payload() - Indicate that SPU2 does NOT place the XTS + * tweak field in the packet payload (it uses IV instead) + * + * Return: 0 + */ +u8 spu2_xts_tweak_in_payload(void) +{ + return 0; +} + +/** + * spu2_tx_status_len() - Return the length of the STATUS field in a SPU + * response message. + * + * Return: Length of STATUS field in bytes. + */ +u8 spu2_tx_status_len(void) +{ + return SPU2_TX_STATUS_LEN; +} + +/** + * spu2_rx_status_len() - Return the length of the STATUS field in a SPU + * response message. + * + * Return: Length of STATUS field in bytes. + */ +u8 spu2_rx_status_len(void) +{ + return SPU2_RX_STATUS_LEN; +} + +/** + * spu2_status_process() - Process the status from a SPU response message. + * @statp: start of STATUS word + * + * Return: 0 - if status is good and response should be processed + * !0 - status indicates an error and response is invalid + */ +int spu2_status_process(u8 *statp) +{ + /* SPU2 status is 2 bytes by default - SPU_RX_STATUS_LEN */ + u16 status = le16_to_cpu(*(__le16 *)statp); + + if (status == 0) + return 0; + + flow_log("rx status is %#x\n", status); + if (status == SPU2_INVALID_ICV) + return SPU_INVALID_ICV; + + return -EBADMSG; +} + +/** + * spu2_ccm_update_iv() - Update the IV as per the requirements for CCM mode. + * + * @digestsize: Digest size of this request + * @cipher_parms: (pointer to) cipher parmaeters, includes IV buf & IV len + * @assoclen: Length of AAD data + * @chunksize: length of input data to be sent in this req + * @is_encrypt: true if this is an output/encrypt operation + * @is_esp: true if this is an ESP / RFC4309 operation + * + */ +void spu2_ccm_update_iv(unsigned int digestsize, + struct spu_cipher_parms *cipher_parms, + unsigned int assoclen, unsigned int chunksize, + bool is_encrypt, bool is_esp) +{ + int L; /* size of length field, in bytes */ + + /* + * In RFC4309 mode, L is fixed at 4 bytes; otherwise, IV from + * testmgr contains (L-1) in bottom 3 bits of first byte, + * per RFC 3610. + */ + if (is_esp) + L = CCM_ESP_L_VALUE; + else + L = ((cipher_parms->iv_buf[0] & CCM_B0_L_PRIME) >> + CCM_B0_L_PRIME_SHIFT) + 1; + + /* SPU2 doesn't want these length bytes nor the first byte... */ + cipher_parms->iv_len -= (1 + L); + memmove(cipher_parms->iv_buf, &cipher_parms->iv_buf[1], + cipher_parms->iv_len); +} + +/** + * spu2_wordalign_padlen() - SPU2 does not require padding. + * @data_size: length of data field in bytes + * + * Return: length of status field padding, in bytes (always 0 on SPU2) + */ +u32 spu2_wordalign_padlen(u32 data_size) +{ + return 0; +} diff --git a/drivers/crypto/bcm/spu2.h b/drivers/crypto/bcm/spu2.h new file mode 100644 index 000000000..a76d4e054 --- /dev/null +++ b/drivers/crypto/bcm/spu2.h @@ -0,0 +1,216 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2016 Broadcom + */ + +/* + * This file contains SPU message definitions specific to SPU2. + */ + +#ifndef _SPU2_H +#define _SPU2_H + +enum spu2_cipher_type { + SPU2_CIPHER_TYPE_NONE = 0x0, + SPU2_CIPHER_TYPE_AES128 = 0x1, + SPU2_CIPHER_TYPE_AES192 = 0x2, + SPU2_CIPHER_TYPE_AES256 = 0x3, + SPU2_CIPHER_TYPE_DES = 0x4, + SPU2_CIPHER_TYPE_3DES = 0x5, + SPU2_CIPHER_TYPE_LAST +}; + +enum spu2_cipher_mode { + SPU2_CIPHER_MODE_ECB = 0x0, + SPU2_CIPHER_MODE_CBC = 0x1, + SPU2_CIPHER_MODE_CTR = 0x2, + SPU2_CIPHER_MODE_CFB = 0x3, + SPU2_CIPHER_MODE_OFB = 0x4, + SPU2_CIPHER_MODE_XTS = 0x5, + SPU2_CIPHER_MODE_CCM = 0x6, + SPU2_CIPHER_MODE_GCM = 0x7, + SPU2_CIPHER_MODE_LAST +}; + +enum spu2_hash_type { + SPU2_HASH_TYPE_NONE = 0x0, + SPU2_HASH_TYPE_AES128 = 0x1, + SPU2_HASH_TYPE_AES192 = 0x2, + SPU2_HASH_TYPE_AES256 = 0x3, + SPU2_HASH_TYPE_MD5 = 0x6, + SPU2_HASH_TYPE_SHA1 = 0x7, + SPU2_HASH_TYPE_SHA224 = 0x8, + SPU2_HASH_TYPE_SHA256 = 0x9, + SPU2_HASH_TYPE_SHA384 = 0xa, + SPU2_HASH_TYPE_SHA512 = 0xb, + SPU2_HASH_TYPE_SHA512_224 = 0xc, + SPU2_HASH_TYPE_SHA512_256 = 0xd, + SPU2_HASH_TYPE_SHA3_224 = 0xe, + SPU2_HASH_TYPE_SHA3_256 = 0xf, + SPU2_HASH_TYPE_SHA3_384 = 0x10, + SPU2_HASH_TYPE_SHA3_512 = 0x11, + SPU2_HASH_TYPE_LAST +}; + +enum spu2_hash_mode { + SPU2_HASH_MODE_CMAC = 0x0, + SPU2_HASH_MODE_CBC_MAC = 0x1, + SPU2_HASH_MODE_XCBC_MAC = 0x2, + SPU2_HASH_MODE_HMAC = 0x3, + SPU2_HASH_MODE_RABIN = 0x4, + SPU2_HASH_MODE_CCM = 0x5, + SPU2_HASH_MODE_GCM = 0x6, + SPU2_HASH_MODE_RESERVED = 0x7, + SPU2_HASH_MODE_LAST +}; + +enum spu2_ret_md_opts { + SPU2_RET_NO_MD = 0, /* return no metadata */ + SPU2_RET_FMD_OMD = 1, /* return both FMD and OMD */ + SPU2_RET_FMD_ONLY = 2, /* return only FMD */ + SPU2_RET_FMD_OMD_IV = 3, /* return FMD and OMD with just IVs */ +}; + +/* Fixed Metadata format */ +struct SPU2_FMD { + __le64 ctrl0; + __le64 ctrl1; + __le64 ctrl2; + __le64 ctrl3; +}; + +#define FMD_SIZE sizeof(struct SPU2_FMD) + +/* Fixed part of request message header length in bytes. Just FMD. */ +#define SPU2_REQ_FIXED_LEN FMD_SIZE +#define SPU2_HEADER_ALLOC_LEN (SPU_REQ_FIXED_LEN + \ + 2 * MAX_KEY_SIZE + 2 * MAX_IV_SIZE) + +/* FMD ctrl0 field masks */ +#define SPU2_CIPH_ENCRYPT_EN 0x1 /* 0: decrypt, 1: encrypt */ +#define SPU2_CIPH_TYPE 0xF0 /* one of spu2_cipher_type */ +#define SPU2_CIPH_TYPE_SHIFT 4 +#define SPU2_CIPH_MODE 0xF00 /* one of spu2_cipher_mode */ +#define SPU2_CIPH_MODE_SHIFT 8 +#define SPU2_CFB_MASK 0x7000 /* cipher feedback mask */ +#define SPU2_CFB_MASK_SHIFT 12 +#define SPU2_PROTO_SEL 0xF00000 /* MACsec, IPsec, TLS... */ +#define SPU2_PROTO_SEL_SHIFT 20 +#define SPU2_HASH_FIRST 0x1000000 /* 1: hash input is input pkt + * data + */ +#define SPU2_CHK_TAG 0x2000000 /* 1: check digest provided */ +#define SPU2_HASH_TYPE 0x1F0000000 /* one of spu2_hash_type */ +#define SPU2_HASH_TYPE_SHIFT 28 +#define SPU2_HASH_MODE 0xF000000000 /* one of spu2_hash_mode */ +#define SPU2_HASH_MODE_SHIFT 36 +#define SPU2_CIPH_PAD_EN 0x100000000000 /* 1: Add pad to end of payload for + * enc + */ +#define SPU2_CIPH_PAD 0xFF000000000000 /* cipher pad value */ +#define SPU2_CIPH_PAD_SHIFT 48 + +/* FMD ctrl1 field masks */ +#define SPU2_TAG_LOC 0x1 /* 1: end of payload, 0: undef */ +#define SPU2_HAS_FR_DATA 0x2 /* 1: msg has frame data */ +#define SPU2_HAS_AAD1 0x4 /* 1: msg has AAD1 field */ +#define SPU2_HAS_NAAD 0x8 /* 1: msg has NAAD field */ +#define SPU2_HAS_AAD2 0x10 /* 1: msg has AAD2 field */ +#define SPU2_HAS_ESN 0x20 /* 1: msg has ESN field */ +#define SPU2_HASH_KEY_LEN 0xFF00 /* len of hash key in bytes. + * HMAC only. + */ +#define SPU2_HASH_KEY_LEN_SHIFT 8 +#define SPU2_CIPH_KEY_LEN 0xFF00000 /* len of cipher key in bytes */ +#define SPU2_CIPH_KEY_LEN_SHIFT 20 +#define SPU2_GENIV 0x10000000 /* 1: hw generates IV */ +#define SPU2_HASH_IV 0x20000000 /* 1: IV incl in hash */ +#define SPU2_RET_IV 0x40000000 /* 1: return IV in output msg + * b4 payload + */ +#define SPU2_RET_IV_LEN 0xF00000000 /* length in bytes of IV returned. + * 0 = 16 bytes + */ +#define SPU2_RET_IV_LEN_SHIFT 32 +#define SPU2_IV_OFFSET 0xF000000000 /* gen IV offset */ +#define SPU2_IV_OFFSET_SHIFT 36 +#define SPU2_IV_LEN 0x1F0000000000 /* length of input IV in bytes */ +#define SPU2_IV_LEN_SHIFT 40 +#define SPU2_HASH_TAG_LEN 0x7F000000000000 /* hash tag length in bytes */ +#define SPU2_HASH_TAG_LEN_SHIFT 48 +#define SPU2_RETURN_MD 0x300000000000000 /* return metadata */ +#define SPU2_RETURN_MD_SHIFT 56 +#define SPU2_RETURN_FD 0x400000000000000 +#define SPU2_RETURN_AAD1 0x800000000000000 +#define SPU2_RETURN_NAAD 0x1000000000000000 +#define SPU2_RETURN_AAD2 0x2000000000000000 +#define SPU2_RETURN_PAY 0x4000000000000000 /* return payload */ + +/* FMD ctrl2 field masks */ +#define SPU2_AAD1_OFFSET 0xFFF /* byte offset of AAD1 field */ +#define SPU2_AAD1_LEN 0xFF000 /* length of AAD1 in bytes */ +#define SPU2_AAD1_LEN_SHIFT 12 +#define SPU2_AAD2_OFFSET 0xFFF00000 /* byte offset of AAD2 field */ +#define SPU2_AAD2_OFFSET_SHIFT 20 +#define SPU2_PL_OFFSET 0xFFFFFFFF00000000 /* payload offset from AAD2 */ +#define SPU2_PL_OFFSET_SHIFT 32 + +/* FMD ctrl3 field masks */ +#define SPU2_PL_LEN 0xFFFFFFFF /* payload length in bytes */ +#define SPU2_TLS_LEN 0xFFFF00000000 /* TLS encrypt: cipher len + * TLS decrypt: compressed len + */ +#define SPU2_TLS_LEN_SHIFT 32 + +/* + * Max value that can be represented in the Payload Length field of the + * ctrl3 word of FMD. + */ +#define SPU2_MAX_PAYLOAD SPU2_PL_LEN + +/* Error values returned in STATUS field of response messages */ +#define SPU2_INVALID_ICV 1 + +void spu2_dump_msg_hdr(u8 *buf, unsigned int buf_len); +u32 spu2_ctx_max_payload(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize); +u32 spu2_payload_length(u8 *spu_hdr); +u16 spu2_response_hdr_len(u16 auth_key_len, u16 enc_key_len, bool is_hash); +u16 spu2_hash_pad_len(enum hash_alg hash_alg, enum hash_mode hash_mode, + u32 chunksize, u16 hash_block_size); +u32 spu2_gcm_ccm_pad_len(enum spu_cipher_mode cipher_mode, + unsigned int data_size); +u32 spu2_assoc_resp_len(enum spu_cipher_mode cipher_mode, + unsigned int assoc_len, unsigned int iv_len, + bool is_encrypt); +u8 spu2_aead_ivlen(enum spu_cipher_mode cipher_mode, + u16 iv_len); +enum hash_type spu2_hash_type(u32 src_sent); +u32 spu2_digest_size(u32 alg_digest_size, enum hash_alg alg, + enum hash_type htype); +u32 spu2_create_request(u8 *spu_hdr, + struct spu_request_opts *req_opts, + struct spu_cipher_parms *cipher_parms, + struct spu_hash_parms *hash_parms, + struct spu_aead_parms *aead_parms, + unsigned int data_size); +u16 spu2_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms); +void spu2_cipher_req_finish(u8 *spu_hdr, + u16 spu_req_hdr_len, + unsigned int is_inbound, + struct spu_cipher_parms *cipher_parms, + unsigned int data_size); +void spu2_request_pad(u8 *pad_start, u32 gcm_padding, u32 hash_pad_len, + enum hash_alg auth_alg, enum hash_mode auth_mode, + unsigned int total_sent, u32 status_padding); +u8 spu2_xts_tweak_in_payload(void); +u8 spu2_tx_status_len(void); +u8 spu2_rx_status_len(void); +int spu2_status_process(u8 *statp); +void spu2_ccm_update_iv(unsigned int digestsize, + struct spu_cipher_parms *cipher_parms, + unsigned int assoclen, unsigned int chunksize, + bool is_encrypt, bool is_esp); +u32 spu2_wordalign_padlen(u32 data_size); +#endif diff --git a/drivers/crypto/bcm/spum.h b/drivers/crypto/bcm/spum.h new file mode 100644 index 000000000..f062f7580 --- /dev/null +++ b/drivers/crypto/bcm/spum.h @@ -0,0 +1,163 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2016 Broadcom + */ + +/* + * This file contains SPU message definitions specific to SPU-M. + */ + +#ifndef _SPUM_H_ +#define _SPUM_H_ + +#define SPU_CRYPTO_OPERATION_GENERIC 0x1 + +/* Length of STATUS field in tx and rx packets */ +#define SPU_TX_STATUS_LEN 4 + +/* SPU-M error codes */ +#define SPU_STATUS_MASK 0x0000FF00 +#define SPU_STATUS_SUCCESS 0x00000000 +#define SPU_STATUS_INVALID_ICV 0x00000100 + +#define SPU_STATUS_ERROR_FLAG 0x00020000 + +/* Request message. MH + EMH + BDESC + BD header */ +#define SPU_REQ_FIXED_LEN 24 + +/* + * Max length of a SPU message header. Used to allocate a buffer where + * the SPU message header is constructed. Can be used for either a SPU-M + * header or a SPU2 header. + * For SPU-M, sum of the following: + * MH - 4 bytes + * EMH - 4 + * SCTX - 3 + + * max auth key len - 64 + * max cipher key len - 264 (RC4) + * max IV len - 16 + * BDESC - 12 + * BD header - 4 + * Total: 371 + * + * For SPU2, FMD_SIZE (32) plus lengths of hash and cipher keys, + * hash and cipher IVs. If SPU2 does not support RC4, then + */ +#define SPU_HEADER_ALLOC_LEN (SPU_REQ_FIXED_LEN + MAX_KEY_SIZE + \ + MAX_KEY_SIZE + MAX_IV_SIZE) + +/* + * Response message header length. Normally MH, EMH, BD header, but when + * BD_SUPPRESS is used for hash requests, there is no BD header. + */ +#define SPU_RESP_HDR_LEN 12 +#define SPU_HASH_RESP_HDR_LEN 8 + +/* + * Max value that can be represented in the Payload Length field of the BD + * header. This is a 16-bit field. + */ +#define SPUM_NS2_MAX_PAYLOAD (BIT(16) - 1) + +/* + * NSP SPU is limited to ~9KB because of FA2 FIFO size limitations; + * Set MAX_PAYLOAD to 8k to allow for addition of header, digest, etc. + * and stay within limitation. + */ + +#define SPUM_NSP_MAX_PAYLOAD 8192 + +/* Buffer Descriptor Header [BDESC]. SPU in big-endian mode. */ +struct BDESC_HEADER { + __be16 offset_mac; /* word 0 [31-16] */ + __be16 length_mac; /* word 0 [15-0] */ + __be16 offset_crypto; /* word 1 [31-16] */ + __be16 length_crypto; /* word 1 [15-0] */ + __be16 offset_icv; /* word 2 [31-16] */ + __be16 offset_iv; /* word 2 [15-0] */ +}; + +/* Buffer Data Header [BD]. SPU in big-endian mode. */ +struct BD_HEADER { + __be16 size; + __be16 prev_length; +}; + +/* Command Context Header. SPU-M in big endian mode. */ +struct MHEADER { + u8 flags; /* [31:24] */ + u8 op_code; /* [23:16] */ + u16 reserved; /* [15:0] */ +}; + +/* MH header flags bits */ +#define MH_SUPDT_PRES BIT(0) +#define MH_HASH_PRES BIT(2) +#define MH_BD_PRES BIT(3) +#define MH_MFM_PRES BIT(4) +#define MH_BDESC_PRES BIT(5) +#define MH_SCTX_PRES BIT(7) + +/* SCTX word 0 bit offsets and fields masks */ +#define SCTX_SIZE 0x000000FF + +/* SCTX word 1 bit shifts and field masks */ +#define UPDT_OFST 0x000000FF /* offset of SCTX updateable fld */ +#define HASH_TYPE 0x00000300 /* hash alg operation type */ +#define HASH_TYPE_SHIFT 8 +#define HASH_MODE 0x00001C00 /* one of spu2_hash_mode */ +#define HASH_MODE_SHIFT 10 +#define HASH_ALG 0x0000E000 /* hash algorithm */ +#define HASH_ALG_SHIFT 13 +#define CIPHER_TYPE 0x00030000 /* encryption operation type */ +#define CIPHER_TYPE_SHIFT 16 +#define CIPHER_MODE 0x001C0000 /* encryption mode */ +#define CIPHER_MODE_SHIFT 18 +#define CIPHER_ALG 0x00E00000 /* encryption algo */ +#define CIPHER_ALG_SHIFT 21 +#define ICV_IS_512 BIT(27) +#define ICV_IS_512_SHIFT 27 +#define CIPHER_ORDER BIT(30) +#define CIPHER_ORDER_SHIFT 30 +#define CIPHER_INBOUND BIT(31) +#define CIPHER_INBOUND_SHIFT 31 + +/* SCTX word 2 bit shifts and field masks */ +#define EXP_IV_SIZE 0x7 +#define IV_OFFSET BIT(3) +#define IV_OFFSET_SHIFT 3 +#define GEN_IV BIT(5) +#define GEN_IV_SHIFT 5 +#define EXPLICIT_IV BIT(6) +#define EXPLICIT_IV_SHIFT 6 +#define SCTX_IV BIT(7) +#define SCTX_IV_SHIFT 7 +#define ICV_SIZE 0x0F00 +#define ICV_SIZE_SHIFT 8 +#define CHECK_ICV BIT(12) +#define CHECK_ICV_SHIFT 12 +#define INSERT_ICV BIT(13) +#define INSERT_ICV_SHIFT 13 +#define BD_SUPPRESS BIT(19) +#define BD_SUPPRESS_SHIFT 19 + +/* Generic Mode Security Context Structure [SCTX] */ +struct SCTX { +/* word 0: protocol flags */ + __be32 proto_flags; + +/* word 1: cipher flags */ + __be32 cipher_flags; + +/* word 2: Extended cipher flags */ + __be32 ecf; + +}; + +struct SPUHEADER { + struct MHEADER mh; + u32 emh; + struct SCTX sa; +}; + +#endif /* _SPUM_H_ */ diff --git a/drivers/crypto/bcm/util.c b/drivers/crypto/bcm/util.c new file mode 100644 index 000000000..d5d9cabea --- /dev/null +++ b/drivers/crypto/bcm/util.c @@ -0,0 +1,530 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 Broadcom + */ + +#include <linux/debugfs.h> + +#include "cipher.h" +#include "util.h" + +/* offset of SPU_OFIFO_CTRL register */ +#define SPU_OFIFO_CTRL 0x40 +#define SPU_FIFO_WATERMARK 0x1FF + +/** + * spu_sg_at_offset() - Find the scatterlist entry at a given distance from the + * start of a scatterlist. + * @sg: [in] Start of a scatterlist + * @skip: [in] Distance from the start of the scatterlist, in bytes + * @sge: [out] Scatterlist entry at skip bytes from start + * @sge_offset: [out] Number of bytes from start of sge buffer to get to + * requested distance. + * + * Return: 0 if entry found at requested distance + * < 0 otherwise + */ +int spu_sg_at_offset(struct scatterlist *sg, unsigned int skip, + struct scatterlist **sge, unsigned int *sge_offset) +{ + /* byte index from start of sg to the end of the previous entry */ + unsigned int index = 0; + /* byte index from start of sg to the end of the current entry */ + unsigned int next_index; + + next_index = sg->length; + while (next_index <= skip) { + sg = sg_next(sg); + index = next_index; + if (!sg) + return -EINVAL; + next_index += sg->length; + } + + *sge_offset = skip - index; + *sge = sg; + return 0; +} + +/* Copy len bytes of sg data, starting at offset skip, to a dest buffer */ +void sg_copy_part_to_buf(struct scatterlist *src, u8 *dest, + unsigned int len, unsigned int skip) +{ + size_t copied; + unsigned int nents = sg_nents(src); + + copied = sg_pcopy_to_buffer(src, nents, dest, len, skip); + if (copied != len) { + flow_log("%s copied %u bytes of %u requested. ", + __func__, (u32)copied, len); + flow_log("sg with %u entries and skip %u\n", nents, skip); + } +} + +/* + * Copy data into a scatterlist starting at a specified offset in the + * scatterlist. Specifically, copy len bytes of data in the buffer src + * into the scatterlist dest, starting skip bytes into the scatterlist. + */ +void sg_copy_part_from_buf(struct scatterlist *dest, u8 *src, + unsigned int len, unsigned int skip) +{ + size_t copied; + unsigned int nents = sg_nents(dest); + + copied = sg_pcopy_from_buffer(dest, nents, src, len, skip); + if (copied != len) { + flow_log("%s copied %u bytes of %u requested. ", + __func__, (u32)copied, len); + flow_log("sg with %u entries and skip %u\n", nents, skip); + } +} + +/** + * spu_sg_count() - Determine number of elements in scatterlist to provide a + * specified number of bytes. + * @sg_list: scatterlist to examine + * @skip: index of starting point + * @nbytes: consider elements of scatterlist until reaching this number of + * bytes + * + * Return: the number of sg entries contributing to nbytes of data + */ +int spu_sg_count(struct scatterlist *sg_list, unsigned int skip, int nbytes) +{ + struct scatterlist *sg; + int sg_nents = 0; + unsigned int offset; + + if (!sg_list) + return 0; + + if (spu_sg_at_offset(sg_list, skip, &sg, &offset) < 0) + return 0; + + while (sg && (nbytes > 0)) { + sg_nents++; + nbytes -= (sg->length - offset); + offset = 0; + sg = sg_next(sg); + } + return sg_nents; +} + +/** + * spu_msg_sg_add() - Copy scatterlist entries from one sg to another, up to a + * given length. + * @to_sg: scatterlist to copy to + * @from_sg: scatterlist to copy from + * @from_skip: number of bytes to skip in from_sg. Non-zero when previous + * request included part of the buffer in entry in from_sg. + * Assumes from_skip < from_sg->length. + * @from_nents: number of entries in from_sg + * @length: number of bytes to copy. may reach this limit before exhausting + * from_sg. + * + * Copies the entries themselves, not the data in the entries. Assumes to_sg has + * enough entries. Does not limit the size of an individual buffer in to_sg. + * + * to_sg, from_sg, skip are all updated to end of copy + * + * Return: Number of bytes copied + */ +u32 spu_msg_sg_add(struct scatterlist **to_sg, + struct scatterlist **from_sg, u32 *from_skip, + u8 from_nents, u32 length) +{ + struct scatterlist *sg; /* an entry in from_sg */ + struct scatterlist *to = *to_sg; + struct scatterlist *from = *from_sg; + u32 skip = *from_skip; + u32 offset; + int i; + u32 entry_len = 0; + u32 frag_len = 0; /* length of entry added to to_sg */ + u32 copied = 0; /* number of bytes copied so far */ + + if (length == 0) + return 0; + + for_each_sg(from, sg, from_nents, i) { + /* number of bytes in this from entry not yet used */ + entry_len = sg->length - skip; + frag_len = min(entry_len, length - copied); + offset = sg->offset + skip; + if (frag_len) + sg_set_page(to++, sg_page(sg), frag_len, offset); + copied += frag_len; + if (copied == entry_len) { + /* used up all of from entry */ + skip = 0; /* start at beginning of next entry */ + } + if (copied == length) + break; + } + *to_sg = to; + *from_sg = sg; + if (frag_len < entry_len) + *from_skip = skip + frag_len; + else + *from_skip = 0; + + return copied; +} + +void add_to_ctr(u8 *ctr_pos, unsigned int increment) +{ + __be64 *high_be = (__be64 *)ctr_pos; + __be64 *low_be = high_be + 1; + u64 orig_low = __be64_to_cpu(*low_be); + u64 new_low = orig_low + (u64)increment; + + *low_be = __cpu_to_be64(new_low); + if (new_low < orig_low) + /* there was a carry from the low 8 bytes */ + *high_be = __cpu_to_be64(__be64_to_cpu(*high_be) + 1); +} + +struct sdesc { + struct shash_desc shash; + char ctx[]; +}; + +/** + * do_shash() - Do a synchronous hash operation in software + * @name: The name of the hash algorithm + * @result: Buffer where digest is to be written + * @data1: First part of data to hash. May be NULL. + * @data1_len: Length of data1, in bytes + * @data2: Second part of data to hash. May be NULL. + * @data2_len: Length of data2, in bytes + * @key: Key (if keyed hash) + * @key_len: Length of key, in bytes (or 0 if non-keyed hash) + * + * Note that the crypto API will not select this driver's own transform because + * this driver only registers asynchronous algos. + * + * Return: 0 if hash successfully stored in result + * < 0 otherwise + */ +int do_shash(unsigned char *name, unsigned char *result, + const u8 *data1, unsigned int data1_len, + const u8 *data2, unsigned int data2_len, + const u8 *key, unsigned int key_len) +{ + int rc; + unsigned int size; + struct crypto_shash *hash; + struct sdesc *sdesc; + + hash = crypto_alloc_shash(name, 0, 0); + if (IS_ERR(hash)) { + rc = PTR_ERR(hash); + pr_err("%s: Crypto %s allocation error %d\n", __func__, name, rc); + return rc; + } + + size = sizeof(struct shash_desc) + crypto_shash_descsize(hash); + sdesc = kmalloc(size, GFP_KERNEL); + if (!sdesc) { + rc = -ENOMEM; + goto do_shash_err; + } + sdesc->shash.tfm = hash; + + if (key_len > 0) { + rc = crypto_shash_setkey(hash, key, key_len); + if (rc) { + pr_err("%s: Could not setkey %s shash\n", __func__, name); + goto do_shash_err; + } + } + + rc = crypto_shash_init(&sdesc->shash); + if (rc) { + pr_err("%s: Could not init %s shash\n", __func__, name); + goto do_shash_err; + } + rc = crypto_shash_update(&sdesc->shash, data1, data1_len); + if (rc) { + pr_err("%s: Could not update1\n", __func__); + goto do_shash_err; + } + if (data2 && data2_len) { + rc = crypto_shash_update(&sdesc->shash, data2, data2_len); + if (rc) { + pr_err("%s: Could not update2\n", __func__); + goto do_shash_err; + } + } + rc = crypto_shash_final(&sdesc->shash, result); + if (rc) + pr_err("%s: Could not generate %s hash\n", __func__, name); + +do_shash_err: + crypto_free_shash(hash); + kfree(sdesc); + + return rc; +} + +#ifdef DEBUG +/* Dump len bytes of a scatterlist starting at skip bytes into the sg */ +void __dump_sg(struct scatterlist *sg, unsigned int skip, unsigned int len) +{ + u8 dbuf[16]; + unsigned int idx = skip; + unsigned int num_out = 0; /* number of bytes dumped so far */ + unsigned int count; + + if (packet_debug_logging) { + while (num_out < len) { + count = (len - num_out > 16) ? 16 : len - num_out; + sg_copy_part_to_buf(sg, dbuf, count, idx); + num_out += count; + print_hex_dump(KERN_ALERT, " sg: ", DUMP_PREFIX_NONE, + 4, 1, dbuf, count, false); + idx += 16; + } + } + if (debug_logging_sleep) + msleep(debug_logging_sleep); +} +#endif + +/* Returns the name for a given cipher alg/mode */ +char *spu_alg_name(enum spu_cipher_alg alg, enum spu_cipher_mode mode) +{ + switch (alg) { + case CIPHER_ALG_RC4: + return "rc4"; + case CIPHER_ALG_AES: + switch (mode) { + case CIPHER_MODE_CBC: + return "cbc(aes)"; + case CIPHER_MODE_ECB: + return "ecb(aes)"; + case CIPHER_MODE_OFB: + return "ofb(aes)"; + case CIPHER_MODE_CFB: + return "cfb(aes)"; + case CIPHER_MODE_CTR: + return "ctr(aes)"; + case CIPHER_MODE_XTS: + return "xts(aes)"; + case CIPHER_MODE_GCM: + return "gcm(aes)"; + default: + return "aes"; + } + break; + case CIPHER_ALG_DES: + switch (mode) { + case CIPHER_MODE_CBC: + return "cbc(des)"; + case CIPHER_MODE_ECB: + return "ecb(des)"; + case CIPHER_MODE_CTR: + return "ctr(des)"; + default: + return "des"; + } + break; + case CIPHER_ALG_3DES: + switch (mode) { + case CIPHER_MODE_CBC: + return "cbc(des3_ede)"; + case CIPHER_MODE_ECB: + return "ecb(des3_ede)"; + case CIPHER_MODE_CTR: + return "ctr(des3_ede)"; + default: + return "3des"; + } + break; + default: + return "other"; + } +} + +static ssize_t spu_debugfs_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct bcm_device_private *ipriv; + char *buf; + ssize_t ret, out_offset, out_count; + int i; + u32 fifo_len; + u32 spu_ofifo_ctrl; + u32 alg; + u32 mode; + u32 op_cnt; + + out_count = 2048; + + buf = kmalloc(out_count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ipriv = filp->private_data; + out_offset = 0; + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Number of SPUs.........%u\n", + ipriv->spu.num_spu); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Current sessions.......%u\n", + atomic_read(&ipriv->session_count)); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Session count..........%u\n", + atomic_read(&ipriv->stream_count)); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Cipher setkey..........%u\n", + atomic_read(&ipriv->setkey_cnt[SPU_OP_CIPHER])); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Cipher Ops.............%u\n", + atomic_read(&ipriv->op_counts[SPU_OP_CIPHER])); + for (alg = 0; alg < CIPHER_ALG_LAST; alg++) { + for (mode = 0; mode < CIPHER_MODE_LAST; mode++) { + op_cnt = atomic_read(&ipriv->cipher_cnt[alg][mode]); + if (op_cnt) { + out_offset += scnprintf(buf + out_offset, + out_count - out_offset, + " %-13s%11u\n", + spu_alg_name(alg, mode), op_cnt); + } + } + } + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Hash Ops...............%u\n", + atomic_read(&ipriv->op_counts[SPU_OP_HASH])); + for (alg = 0; alg < HASH_ALG_LAST; alg++) { + op_cnt = atomic_read(&ipriv->hash_cnt[alg]); + if (op_cnt) { + out_offset += scnprintf(buf + out_offset, + out_count - out_offset, + " %-13s%11u\n", + hash_alg_name[alg], op_cnt); + } + } + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "HMAC setkey............%u\n", + atomic_read(&ipriv->setkey_cnt[SPU_OP_HMAC])); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "HMAC Ops...............%u\n", + atomic_read(&ipriv->op_counts[SPU_OP_HMAC])); + for (alg = 0; alg < HASH_ALG_LAST; alg++) { + op_cnt = atomic_read(&ipriv->hmac_cnt[alg]); + if (op_cnt) { + out_offset += scnprintf(buf + out_offset, + out_count - out_offset, + " %-13s%11u\n", + hash_alg_name[alg], op_cnt); + } + } + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "AEAD setkey............%u\n", + atomic_read(&ipriv->setkey_cnt[SPU_OP_AEAD])); + + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "AEAD Ops...............%u\n", + atomic_read(&ipriv->op_counts[SPU_OP_AEAD])); + for (alg = 0; alg < AEAD_TYPE_LAST; alg++) { + op_cnt = atomic_read(&ipriv->aead_cnt[alg]); + if (op_cnt) { + out_offset += scnprintf(buf + out_offset, + out_count - out_offset, + " %-13s%11u\n", + aead_alg_name[alg], op_cnt); + } + } + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Bytes of req data......%llu\n", + (u64)atomic64_read(&ipriv->bytes_out)); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Bytes of resp data.....%llu\n", + (u64)atomic64_read(&ipriv->bytes_in)); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Mailbox full...........%u\n", + atomic_read(&ipriv->mb_no_spc)); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Mailbox send failures..%u\n", + atomic_read(&ipriv->mb_send_fail)); + out_offset += scnprintf(buf + out_offset, out_count - out_offset, + "Check ICV errors.......%u\n", + atomic_read(&ipriv->bad_icv)); + if (ipriv->spu.spu_type == SPU_TYPE_SPUM) + for (i = 0; i < ipriv->spu.num_spu; i++) { + spu_ofifo_ctrl = ioread32(ipriv->spu.reg_vbase[i] + + SPU_OFIFO_CTRL); + fifo_len = spu_ofifo_ctrl & SPU_FIFO_WATERMARK; + out_offset += scnprintf(buf + out_offset, + out_count - out_offset, + "SPU %d output FIFO high water.....%u\n", + i, fifo_len); + } + + if (out_offset > out_count) + out_offset = out_count; + + ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); + kfree(buf); + return ret; +} + +static const struct file_operations spu_debugfs_stats = { + .owner = THIS_MODULE, + .open = simple_open, + .read = spu_debugfs_read, +}; + +/* + * Create the debug FS directories. If the top-level directory has not yet + * been created, create it now. Create a stats file in this directory for + * a SPU. + */ +void spu_setup_debugfs(void) +{ + if (!debugfs_initialized()) + return; + + if (!iproc_priv.debugfs_dir) + iproc_priv.debugfs_dir = debugfs_create_dir(KBUILD_MODNAME, + NULL); + + if (!iproc_priv.debugfs_stats) + /* Create file with permissions S_IRUSR */ + debugfs_create_file("stats", 0400, iproc_priv.debugfs_dir, + &iproc_priv, &spu_debugfs_stats); +} + +void spu_free_debugfs(void) +{ + debugfs_remove_recursive(iproc_priv.debugfs_dir); + iproc_priv.debugfs_dir = NULL; +} + +/** + * format_value_ccm() - Format a value into a buffer, using a specified number + * of bytes (i.e. maybe writing value X into a 4 byte + * buffer, or maybe into a 12 byte buffer), as per the + * SPU CCM spec. + * + * @val: value to write (up to max of unsigned int) + * @buf: (pointer to) buffer to write the value + * @len: number of bytes to use (0 to 255) + * + */ +void format_value_ccm(unsigned int val, u8 *buf, u8 len) +{ + int i; + + /* First clear full output buffer */ + memset(buf, 0, len); + + /* Then, starting from right side, fill in with data */ + for (i = 0; i < len; i++) { + buf[len - i - 1] = (val >> (8 * i)) & 0xff; + if (i >= 3) + break; /* Only handle up to 32 bits of 'val' */ + } +} diff --git a/drivers/crypto/bcm/util.h b/drivers/crypto/bcm/util.h new file mode 100644 index 000000000..61c256384 --- /dev/null +++ b/drivers/crypto/bcm/util.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2016 Broadcom + */ + +#ifndef _UTIL_H +#define _UTIL_H + +#include <linux/kernel.h> +#include <linux/delay.h> + +#include "spu.h" + +extern int flow_debug_logging; +extern int packet_debug_logging; +extern int debug_logging_sleep; + +#ifdef DEBUG +#define flow_log(...) \ + do { \ + if (flow_debug_logging) { \ + printk(__VA_ARGS__); \ + if (debug_logging_sleep) \ + msleep(debug_logging_sleep); \ + } \ + } while (0) +#define flow_dump(msg, var, var_len) \ + do { \ + if (flow_debug_logging) { \ + print_hex_dump(KERN_ALERT, msg, DUMP_PREFIX_NONE, \ + 16, 1, var, var_len, false); \ + if (debug_logging_sleep) \ + msleep(debug_logging_sleep); \ + } \ + } while (0) + +#define packet_log(...) \ + do { \ + if (packet_debug_logging) { \ + printk(__VA_ARGS__); \ + if (debug_logging_sleep) \ + msleep(debug_logging_sleep); \ + } \ + } while (0) +#define packet_dump(msg, var, var_len) \ + do { \ + if (packet_debug_logging) { \ + print_hex_dump(KERN_ALERT, msg, DUMP_PREFIX_NONE, \ + 16, 1, var, var_len, false); \ + if (debug_logging_sleep) \ + msleep(debug_logging_sleep); \ + } \ + } while (0) + +void __dump_sg(struct scatterlist *sg, unsigned int skip, unsigned int len); + +#define dump_sg(sg, skip, len) __dump_sg(sg, skip, len) + +#else /* !DEBUG_ON */ + +static inline void flow_log(const char *format, ...) +{ +} + +static inline void flow_dump(const char *msg, const void *var, size_t var_len) +{ +} + +static inline void packet_log(const char *format, ...) +{ +} + +static inline void packet_dump(const char *msg, const void *var, size_t var_len) +{ +} + +static inline void dump_sg(struct scatterlist *sg, unsigned int skip, + unsigned int len) +{ +} + +#endif /* DEBUG_ON */ + +int spu_sg_at_offset(struct scatterlist *sg, unsigned int skip, + struct scatterlist **sge, unsigned int *sge_offset); + +/* Copy sg data, from skip, length len, to dest */ +void sg_copy_part_to_buf(struct scatterlist *src, u8 *dest, + unsigned int len, unsigned int skip); +/* Copy src into scatterlist from offset, length len */ +void sg_copy_part_from_buf(struct scatterlist *dest, u8 *src, + unsigned int len, unsigned int skip); + +int spu_sg_count(struct scatterlist *sg_list, unsigned int skip, int nbytes); +u32 spu_msg_sg_add(struct scatterlist **to_sg, + struct scatterlist **from_sg, u32 *skip, + u8 from_nents, u32 tot_len); + +void add_to_ctr(u8 *ctr_pos, unsigned int increment); + +/* produce a message digest from data of length n bytes */ +int do_shash(unsigned char *name, unsigned char *result, + const u8 *data1, unsigned int data1_len, + const u8 *data2, unsigned int data2_len, + const u8 *key, unsigned int key_len); + +char *spu_alg_name(enum spu_cipher_alg alg, enum spu_cipher_mode mode); + +void spu_setup_debugfs(void); +void spu_free_debugfs(void); +void format_value_ccm(unsigned int val, u8 *buf, u8 len); + +#endif |