diff options
Diffstat (limited to 'drivers/crypto/nx/nx-common-powernv.c')
| -rw-r--r-- | drivers/crypto/nx/nx-common-powernv.c | 1138 |
1 files changed, 1138 insertions, 0 deletions
diff --git a/drivers/crypto/nx/nx-common-powernv.c b/drivers/crypto/nx/nx-common-powernv.c new file mode 100644 index 000000000..f34c75a86 --- /dev/null +++ b/drivers/crypto/nx/nx-common-powernv.c @@ -0,0 +1,1138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for IBM PowerNV compression accelerator + * + * Copyright (C) 2015 Dan Streetman, IBM Corp + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "nx-842.h" + +#include <linux/timer.h> + +#include <asm/prom.h> +#include <asm/icswx.h> +#include <asm/vas.h> +#include <asm/reg.h> +#include <asm/opal-api.h> +#include <asm/opal.h> + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>"); +MODULE_DESCRIPTION("H/W Compression driver for IBM PowerNV processors"); +MODULE_ALIAS_CRYPTO("842"); +MODULE_ALIAS_CRYPTO("842-nx"); + +#define WORKMEM_ALIGN (CRB_ALIGN) +#define CSB_WAIT_MAX (5000) /* ms */ +#define VAS_RETRIES (10) + +struct nx842_workmem { + /* Below fields must be properly aligned */ + struct coprocessor_request_block crb; /* CRB_ALIGN align */ + struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */ + struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */ + /* Above fields must be properly aligned */ + + ktime_t start; + + char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */ +} __packed __aligned(WORKMEM_ALIGN); + +struct nx_coproc { + unsigned int chip_id; + unsigned int ct; /* Can be 842 or GZIP high/normal*/ + unsigned int ci; /* Coprocessor instance, used with icswx */ + struct { + struct vas_window *rxwin; + int id; + } vas; + struct list_head list; +}; + +/* + * Send the request to NX engine on the chip for the corresponding CPU + * where the process is executing. Use with VAS function. + */ +static DEFINE_PER_CPU(struct vas_window *, cpu_txwin); + +/* no cpu hotplug on powernv, so this list never changes after init */ +static LIST_HEAD(nx_coprocs); +static unsigned int nx842_ct; /* used in icswx function */ + +/* + * Using same values as in skiboot or coprocessor type representing + * in NX workbook. + */ +#define NX_CT_GZIP (2) /* on P9 and later */ +#define NX_CT_842 (3) + +static int (*nx842_powernv_exec)(const unsigned char *in, + unsigned int inlen, unsigned char *out, + unsigned int *outlenp, void *workmem, int fc); + +/** + * setup_indirect_dde - Setup an indirect DDE + * + * The DDE is setup with the DDE count, byte count, and address of + * first direct DDE in the list. + */ +static void setup_indirect_dde(struct data_descriptor_entry *dde, + struct data_descriptor_entry *ddl, + unsigned int dde_count, unsigned int byte_count) +{ + dde->flags = 0; + dde->count = dde_count; + dde->index = 0; + dde->length = cpu_to_be32(byte_count); + dde->address = cpu_to_be64(nx842_get_pa(ddl)); +} + +/** + * setup_direct_dde - Setup single DDE from buffer + * + * The DDE is setup with the buffer and length. The buffer must be properly + * aligned. The used length is returned. + * Returns: + * N Successfully set up DDE with N bytes + */ +static unsigned int setup_direct_dde(struct data_descriptor_entry *dde, + unsigned long pa, unsigned int len) +{ + unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa)); + + dde->flags = 0; + dde->count = 0; + dde->index = 0; + dde->length = cpu_to_be32(l); + dde->address = cpu_to_be64(pa); + + return l; +} + +/** + * setup_ddl - Setup DDL from buffer + * + * Returns: + * 0 Successfully set up DDL + */ +static int setup_ddl(struct data_descriptor_entry *dde, + struct data_descriptor_entry *ddl, + unsigned char *buf, unsigned int len, + bool in) +{ + unsigned long pa = nx842_get_pa(buf); + int i, ret, total_len = len; + + if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) { + pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n", + in ? "input" : "output", pa, DDE_BUFFER_ALIGN); + return -EINVAL; + } + + /* only need to check last mult; since buffer must be + * DDE_BUFFER_ALIGN aligned, and that is a multiple of + * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers + * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT. + */ + if (len % DDE_BUFFER_LAST_MULT) { + pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n", + in ? "input" : "output", len, DDE_BUFFER_LAST_MULT); + if (in) + return -EINVAL; + len = round_down(len, DDE_BUFFER_LAST_MULT); + } + + /* use a single direct DDE */ + if (len <= LEN_ON_PAGE(pa)) { + ret = setup_direct_dde(dde, pa, len); + WARN_ON(ret < len); + return 0; + } + + /* use the DDL */ + for (i = 0; i < DDL_LEN_MAX && len > 0; i++) { + ret = setup_direct_dde(&ddl[i], pa, len); + buf += ret; + len -= ret; + pa = nx842_get_pa(buf); + } + + if (len > 0) { + pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n", + total_len, in ? "input" : "output", len); + if (in) + return -EMSGSIZE; + total_len -= len; + } + setup_indirect_dde(dde, ddl, i, total_len); + + return 0; +} + +#define CSB_ERR(csb, msg, ...) \ + pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \ + ##__VA_ARGS__, (csb)->flags, \ + (csb)->cs, (csb)->cc, (csb)->ce, \ + be32_to_cpu((csb)->count)) + +#define CSB_ERR_ADDR(csb, msg, ...) \ + CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__, \ + (unsigned long)be64_to_cpu((csb)->address)) + +/** + * wait_for_csb + */ +static int wait_for_csb(struct nx842_workmem *wmem, + struct coprocessor_status_block *csb) +{ + ktime_t start = wmem->start, now = ktime_get(); + ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX); + + while (!(READ_ONCE(csb->flags) & CSB_V)) { + cpu_relax(); + now = ktime_get(); + if (ktime_after(now, timeout)) + break; + } + + /* hw has updated csb and output buffer */ + barrier(); + + /* check CSB flags */ + if (!(csb->flags & CSB_V)) { + CSB_ERR(csb, "CSB still not valid after %ld us, giving up", + (long)ktime_us_delta(now, start)); + return -ETIMEDOUT; + } + if (csb->flags & CSB_F) { + CSB_ERR(csb, "Invalid CSB format"); + return -EPROTO; + } + if (csb->flags & CSB_CH) { + CSB_ERR(csb, "Invalid CSB chaining state"); + return -EPROTO; + } + + /* verify CSB completion sequence is 0 */ + if (csb->cs) { + CSB_ERR(csb, "Invalid CSB completion sequence"); + return -EPROTO; + } + + /* check CSB Completion Code */ + switch (csb->cc) { + /* no error */ + case CSB_CC_SUCCESS: + break; + case CSB_CC_TPBC_GT_SPBC: + /* not an error, but the compressed data is + * larger than the uncompressed data :( + */ + break; + + /* input data errors */ + case CSB_CC_OPERAND_OVERLAP: + /* input and output buffers overlap */ + CSB_ERR(csb, "Operand Overlap error"); + return -EINVAL; + case CSB_CC_INVALID_OPERAND: + CSB_ERR(csb, "Invalid operand"); + return -EINVAL; + case CSB_CC_NOSPC: + /* output buffer too small */ + return -ENOSPC; + case CSB_CC_ABORT: + CSB_ERR(csb, "Function aborted"); + return -EINTR; + case CSB_CC_CRC_MISMATCH: + CSB_ERR(csb, "CRC mismatch"); + return -EINVAL; + case CSB_CC_TEMPL_INVALID: + CSB_ERR(csb, "Compressed data template invalid"); + return -EINVAL; + case CSB_CC_TEMPL_OVERFLOW: + CSB_ERR(csb, "Compressed data template shows data past end"); + return -EINVAL; + case CSB_CC_EXCEED_BYTE_COUNT: /* P9 or later */ + /* + * DDE byte count exceeds the limit specified in Maximum + * byte count register. + */ + CSB_ERR(csb, "DDE byte count exceeds the limit"); + return -EINVAL; + + /* these should not happen */ + case CSB_CC_INVALID_ALIGN: + /* setup_ddl should have detected this */ + CSB_ERR_ADDR(csb, "Invalid alignment"); + return -EINVAL; + case CSB_CC_DATA_LENGTH: + /* setup_ddl should have detected this */ + CSB_ERR(csb, "Invalid data length"); + return -EINVAL; + case CSB_CC_WR_TRANSLATION: + case CSB_CC_TRANSLATION: + case CSB_CC_TRANSLATION_DUP1: + case CSB_CC_TRANSLATION_DUP2: + case CSB_CC_TRANSLATION_DUP3: + case CSB_CC_TRANSLATION_DUP4: + case CSB_CC_TRANSLATION_DUP5: + case CSB_CC_TRANSLATION_DUP6: + /* should not happen, we use physical addrs */ + CSB_ERR_ADDR(csb, "Translation error"); + return -EPROTO; + case CSB_CC_WR_PROTECTION: + case CSB_CC_PROTECTION: + case CSB_CC_PROTECTION_DUP1: + case CSB_CC_PROTECTION_DUP2: + case CSB_CC_PROTECTION_DUP3: + case CSB_CC_PROTECTION_DUP4: + case CSB_CC_PROTECTION_DUP5: + case CSB_CC_PROTECTION_DUP6: + /* should not happen, we use physical addrs */ + CSB_ERR_ADDR(csb, "Protection error"); + return -EPROTO; + case CSB_CC_PRIVILEGE: + /* shouldn't happen, we're in HYP mode */ + CSB_ERR(csb, "Insufficient Privilege error"); + return -EPROTO; + case CSB_CC_EXCESSIVE_DDE: + /* shouldn't happen, setup_ddl doesn't use many dde's */ + CSB_ERR(csb, "Too many DDEs in DDL"); + return -EINVAL; + case CSB_CC_TRANSPORT: + case CSB_CC_INVALID_CRB: /* P9 or later */ + /* shouldn't happen, we setup CRB correctly */ + CSB_ERR(csb, "Invalid CRB"); + return -EINVAL; + case CSB_CC_INVALID_DDE: /* P9 or later */ + /* + * shouldn't happen, setup_direct/indirect_dde creates + * DDE right + */ + CSB_ERR(csb, "Invalid DDE"); + return -EINVAL; + case CSB_CC_SEGMENTED_DDL: + /* shouldn't happen, setup_ddl creates DDL right */ + CSB_ERR(csb, "Segmented DDL error"); + return -EINVAL; + case CSB_CC_DDE_OVERFLOW: + /* shouldn't happen, setup_ddl creates DDL right */ + CSB_ERR(csb, "DDE overflow error"); + return -EINVAL; + case CSB_CC_SESSION: + /* should not happen with ICSWX */ + CSB_ERR(csb, "Session violation error"); + return -EPROTO; + case CSB_CC_CHAIN: + /* should not happen, we don't use chained CRBs */ + CSB_ERR(csb, "Chained CRB error"); + return -EPROTO; + case CSB_CC_SEQUENCE: + /* should not happen, we don't use chained CRBs */ + CSB_ERR(csb, "CRB sequence number error"); + return -EPROTO; + case CSB_CC_UNKNOWN_CODE: + CSB_ERR(csb, "Unknown subfunction code"); + return -EPROTO; + + /* hardware errors */ + case CSB_CC_RD_EXTERNAL: + case CSB_CC_RD_EXTERNAL_DUP1: + case CSB_CC_RD_EXTERNAL_DUP2: + case CSB_CC_RD_EXTERNAL_DUP3: + CSB_ERR_ADDR(csb, "Read error outside coprocessor"); + return -EPROTO; + case CSB_CC_WR_EXTERNAL: + CSB_ERR_ADDR(csb, "Write error outside coprocessor"); + return -EPROTO; + case CSB_CC_INTERNAL: + CSB_ERR(csb, "Internal error in coprocessor"); + return -EPROTO; + case CSB_CC_PROVISION: + CSB_ERR(csb, "Storage provision error"); + return -EPROTO; + case CSB_CC_HW: + CSB_ERR(csb, "Correctable hardware error"); + return -EPROTO; + case CSB_CC_HW_EXPIRED_TIMER: /* P9 or later */ + CSB_ERR(csb, "Job did not finish within allowed time"); + return -EPROTO; + + default: + CSB_ERR(csb, "Invalid CC %d", csb->cc); + return -EPROTO; + } + + /* check Completion Extension state */ + if (csb->ce & CSB_CE_TERMINATION) { + CSB_ERR(csb, "CSB request was terminated"); + return -EPROTO; + } + if (csb->ce & CSB_CE_INCOMPLETE) { + CSB_ERR(csb, "CSB request not complete"); + return -EPROTO; + } + if (!(csb->ce & CSB_CE_TPBC)) { + CSB_ERR(csb, "TPBC not provided, unknown target length"); + return -EPROTO; + } + + /* successful completion */ + pr_debug_ratelimited("Processed %u bytes in %lu us\n", + be32_to_cpu(csb->count), + (unsigned long)ktime_us_delta(now, start)); + + return 0; +} + +static int nx842_config_crb(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int outlen, + struct nx842_workmem *wmem) +{ + struct coprocessor_request_block *crb; + struct coprocessor_status_block *csb; + u64 csb_addr; + int ret; + + crb = &wmem->crb; + csb = &crb->csb; + + /* Clear any previous values */ + memset(crb, 0, sizeof(*crb)); + + /* set up DDLs */ + ret = setup_ddl(&crb->source, wmem->ddl_in, + (unsigned char *)in, inlen, true); + if (ret) + return ret; + + ret = setup_ddl(&crb->target, wmem->ddl_out, + out, outlen, false); + if (ret) + return ret; + + /* set up CRB's CSB addr */ + csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS; + csb_addr |= CRB_CSB_AT; /* Addrs are phys */ + crb->csb_addr = cpu_to_be64(csb_addr); + + return 0; +} + +/** + * nx842_exec_icswx - compress/decompress data using the 842 algorithm + * + * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems. + * This compresses or decompresses the provided input buffer into the provided + * output buffer. + * + * Upon return from this function @outlen contains the length of the + * output data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * The @workmem buffer should only be used by one function call at a time. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * @fc: function code, see CCW Function Codes in nx-842.h + * + * Returns: + * 0 Success, output of length @outlenp stored in the buffer at @out + * -ENODEV Hardware unavailable + * -ENOSPC Output buffer is to small + * -EMSGSIZE Input buffer too large + * -EINVAL buffer constraints do not fix nx842_constraints + * -EPROTO hardware error during operation + * -ETIMEDOUT hardware did not complete operation in reasonable time + * -EINTR operation was aborted + */ +static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *workmem, int fc) +{ + struct coprocessor_request_block *crb; + struct coprocessor_status_block *csb; + struct nx842_workmem *wmem; + int ret; + u32 ccw; + unsigned int outlen = *outlenp; + + wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN); + + *outlenp = 0; + + /* shoudn't happen, we don't load without a coproc */ + if (!nx842_ct) { + pr_err_ratelimited("coprocessor CT is 0"); + return -ENODEV; + } + + ret = nx842_config_crb(in, inlen, out, outlen, wmem); + if (ret) + return ret; + + crb = &wmem->crb; + csb = &crb->csb; + + /* set up CCW */ + ccw = 0; + ccw = SET_FIELD(CCW_CT, ccw, nx842_ct); + ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */ + ccw = SET_FIELD(CCW_FC_842, ccw, fc); + + wmem->start = ktime_get(); + + /* do ICSWX */ + ret = icswx(cpu_to_be32(ccw), crb); + + pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret, + (unsigned int)ccw, + (unsigned int)be32_to_cpu(crb->ccw)); + + /* + * NX842 coprocessor sets 3rd bit in CR register with XER[S0]. + * XER[S0] is the integer summary overflow bit which is nothing + * to do NX. Since this bit can be set with other return values, + * mask this bit. + */ + ret &= ~ICSWX_XERS0; + + switch (ret) { + case ICSWX_INITIATED: + ret = wait_for_csb(wmem, csb); + break; + case ICSWX_BUSY: + pr_debug_ratelimited("842 Coprocessor busy\n"); + ret = -EBUSY; + break; + case ICSWX_REJECTED: + pr_err_ratelimited("ICSWX rejected\n"); + ret = -EPROTO; + break; + } + + if (!ret) + *outlenp = be32_to_cpu(csb->count); + + return ret; +} + +/** + * nx842_exec_vas - compress/decompress data using the 842 algorithm + * + * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems. + * This compresses or decompresses the provided input buffer into the provided + * output buffer. + * + * Upon return from this function @outlen contains the length of the + * output data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * The @workmem buffer should only be used by one function call at a time. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * @fc: function code, see CCW Function Codes in nx-842.h + * + * Returns: + * 0 Success, output of length @outlenp stored in the buffer + * at @out + * -ENODEV Hardware unavailable + * -ENOSPC Output buffer is to small + * -EMSGSIZE Input buffer too large + * -EINVAL buffer constraints do not fix nx842_constraints + * -EPROTO hardware error during operation + * -ETIMEDOUT hardware did not complete operation in reasonable time + * -EINTR operation was aborted + */ +static int nx842_exec_vas(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *workmem, int fc) +{ + struct coprocessor_request_block *crb; + struct coprocessor_status_block *csb; + struct nx842_workmem *wmem; + struct vas_window *txwin; + int ret, i = 0; + u32 ccw; + unsigned int outlen = *outlenp; + + wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN); + + *outlenp = 0; + + crb = &wmem->crb; + csb = &crb->csb; + + ret = nx842_config_crb(in, inlen, out, outlen, wmem); + if (ret) + return ret; + + ccw = 0; + ccw = SET_FIELD(CCW_FC_842, ccw, fc); + crb->ccw = cpu_to_be32(ccw); + + do { + wmem->start = ktime_get(); + preempt_disable(); + txwin = this_cpu_read(cpu_txwin); + + /* + * VAS copy CRB into L2 cache. Refer <asm/vas.h>. + * @crb and @offset. + */ + vas_copy_crb(crb, 0); + + /* + * VAS paste previously copied CRB to NX. + * @txwin, @offset and @last (must be true). + */ + ret = vas_paste_crb(txwin, 0, 1); + preempt_enable(); + /* + * Retry copy/paste function for VAS failures. + */ + } while (ret && (i++ < VAS_RETRIES)); + + if (ret) { + pr_err_ratelimited("VAS copy/paste failed\n"); + return ret; + } + + ret = wait_for_csb(wmem, csb); + if (!ret) + *outlenp = be32_to_cpu(csb->count); + + return ret; +} + +/** + * nx842_powernv_compress - Compress data using the 842 algorithm + * + * Compression provided by the NX842 coprocessor on IBM PowerNV systems. + * The input buffer is compressed and the result is stored in the + * provided output buffer. + * + * Upon return from this function @outlen contains the length of the + * compressed data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * + * Returns: see @nx842_powernv_exec() + */ +static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *wmem) +{ + return nx842_powernv_exec(in, inlen, out, outlenp, + wmem, CCW_FC_842_COMP_CRC); +} + +/** + * nx842_powernv_decompress - Decompress data using the 842 algorithm + * + * Decompression provided by the NX842 coprocessor on IBM PowerNV systems. + * The input buffer is decompressed and the result is stored in the + * provided output buffer. + * + * Upon return from this function @outlen contains the length of the + * decompressed data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @wmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * + * Returns: see @nx842_powernv_exec() + */ +static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *wmem) +{ + return nx842_powernv_exec(in, inlen, out, outlenp, + wmem, CCW_FC_842_DECOMP_CRC); +} + +static inline void nx_add_coprocs_list(struct nx_coproc *coproc, + int chipid) +{ + coproc->chip_id = chipid; + INIT_LIST_HEAD(&coproc->list); + list_add(&coproc->list, &nx_coprocs); +} + +static struct vas_window *nx_alloc_txwin(struct nx_coproc *coproc) +{ + struct vas_window *txwin = NULL; + struct vas_tx_win_attr txattr; + + /* + * Kernel requests will be high priority. So open send + * windows only for high priority RxFIFO entries. + */ + vas_init_tx_win_attr(&txattr, coproc->ct); + txattr.lpid = 0; /* lpid is 0 for kernel requests */ + + /* + * Open a VAS send window which is used to send request to NX. + */ + txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr); + if (IS_ERR(txwin)) + pr_err("ibm,nx-842: Can not open TX window: %ld\n", + PTR_ERR(txwin)); + + return txwin; +} + +/* + * Identify chip ID for each CPU, open send wndow for the corresponding NX + * engine and save txwin in percpu cpu_txwin. + * cpu_txwin is used in copy/paste operation for each compression / + * decompression request. + */ +static int nx_open_percpu_txwins(void) +{ + struct nx_coproc *coproc, *n; + unsigned int i, chip_id; + + for_each_possible_cpu(i) { + struct vas_window *txwin = NULL; + + chip_id = cpu_to_chip_id(i); + + list_for_each_entry_safe(coproc, n, &nx_coprocs, list) { + /* + * Kernel requests use only high priority FIFOs. So + * open send windows for these FIFOs. + * GZIP is not supported in kernel right now. + */ + + if (coproc->ct != VAS_COP_TYPE_842_HIPRI) + continue; + + if (coproc->chip_id == chip_id) { + txwin = nx_alloc_txwin(coproc); + if (IS_ERR(txwin)) + return PTR_ERR(txwin); + + per_cpu(cpu_txwin, i) = txwin; + break; + } + } + + if (!per_cpu(cpu_txwin, i)) { + /* shouldn't happen, Each chip will have NX engine */ + pr_err("NX engine is not available for CPU %d\n", i); + return -EINVAL; + } + } + + return 0; +} + +static int __init nx_set_ct(struct nx_coproc *coproc, const char *priority, + int high, int normal) +{ + if (!strcmp(priority, "High")) + coproc->ct = high; + else if (!strcmp(priority, "Normal")) + coproc->ct = normal; + else { + pr_err("Invalid RxFIFO priority value\n"); + return -EINVAL; + } + + return 0; +} + +static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id, + int vasid, int type, int *ct) +{ + struct vas_window *rxwin = NULL; + struct vas_rx_win_attr rxattr; + u32 lpid, pid, tid, fifo_size; + struct nx_coproc *coproc; + u64 rx_fifo; + const char *priority; + int ret; + + ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo); + if (ret) { + pr_err("Missing rx-fifo-address property\n"); + return ret; + } + + ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size); + if (ret) { + pr_err("Missing rx-fifo-size property\n"); + return ret; + } + + ret = of_property_read_u32(dn, "lpid", &lpid); + if (ret) { + pr_err("Missing lpid property\n"); + return ret; + } + + ret = of_property_read_u32(dn, "pid", &pid); + if (ret) { + pr_err("Missing pid property\n"); + return ret; + } + + ret = of_property_read_u32(dn, "tid", &tid); + if (ret) { + pr_err("Missing tid property\n"); + return ret; + } + + ret = of_property_read_string(dn, "priority", &priority); + if (ret) { + pr_err("Missing priority property\n"); + return ret; + } + + coproc = kzalloc(sizeof(*coproc), GFP_KERNEL); + if (!coproc) + return -ENOMEM; + + if (type == NX_CT_842) + ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_842_HIPRI, + VAS_COP_TYPE_842); + else if (type == NX_CT_GZIP) + ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_GZIP_HIPRI, + VAS_COP_TYPE_GZIP); + + if (ret) + goto err_out; + + vas_init_rx_win_attr(&rxattr, coproc->ct); + rxattr.rx_fifo = rx_fifo; + rxattr.rx_fifo_size = fifo_size; + rxattr.lnotify_lpid = lpid; + rxattr.lnotify_pid = pid; + rxattr.lnotify_tid = tid; + /* + * Maximum RX window credits can not be more than #CRBs in + * RxFIFO. Otherwise, can get checkstop if RxFIFO overruns. + */ + rxattr.wcreds_max = fifo_size / CRB_SIZE; + + /* + * Open a VAS receice window which is used to configure RxFIFO + * for NX. + */ + rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr); + if (IS_ERR(rxwin)) { + ret = PTR_ERR(rxwin); + pr_err("setting RxFIFO with VAS failed: %d\n", + ret); + goto err_out; + } + + coproc->vas.rxwin = rxwin; + coproc->vas.id = vasid; + nx_add_coprocs_list(coproc, chip_id); + + /* + * (lpid, pid, tid) combination has to be unique for each + * coprocessor instance in the system. So to make it + * unique, skiboot uses coprocessor type such as 842 or + * GZIP for pid and provides this value to kernel in pid + * device-tree property. + */ + *ct = pid; + + return 0; + +err_out: + kfree(coproc); + return ret; +} + +static int __init nx_coproc_init(int chip_id, int ct_842, int ct_gzip) +{ + int ret = 0; + + if (opal_check_token(OPAL_NX_COPROC_INIT)) { + ret = opal_nx_coproc_init(chip_id, ct_842); + + if (!ret) + ret = opal_nx_coproc_init(chip_id, ct_gzip); + + if (ret) { + ret = opal_error_code(ret); + pr_err("Failed to initialize NX for chip(%d): %d\n", + chip_id, ret); + } + } else + pr_warn("Firmware doesn't support NX initialization\n"); + + return ret; +} + +static int __init find_nx_device_tree(struct device_node *dn, int chip_id, + int vasid, int type, char *devname, + int *ct) +{ + int ret = 0; + + if (of_device_is_compatible(dn, devname)) { + ret = vas_cfg_coproc_info(dn, chip_id, vasid, type, ct); + if (ret) + of_node_put(dn); + } + + return ret; +} + +static int __init nx_powernv_probe_vas(struct device_node *pn) +{ + int chip_id, vasid, ret = 0; + int ct_842 = 0, ct_gzip = 0; + struct device_node *dn; + + chip_id = of_get_ibm_chip_id(pn); + if (chip_id < 0) { + pr_err("ibm,chip-id missing\n"); + return -EINVAL; + } + + vasid = chip_to_vas_id(chip_id); + if (vasid < 0) { + pr_err("Unable to map chip_id %d to vasid\n", chip_id); + return -EINVAL; + } + + for_each_child_of_node(pn, dn) { + ret = find_nx_device_tree(dn, chip_id, vasid, NX_CT_842, + "ibm,p9-nx-842", &ct_842); + + if (!ret) + ret = find_nx_device_tree(dn, chip_id, vasid, + NX_CT_GZIP, "ibm,p9-nx-gzip", &ct_gzip); + + if (ret) { + of_node_put(dn); + return ret; + } + } + + if (!ct_842 || !ct_gzip) { + pr_err("NX FIFO nodes are missing\n"); + return -EINVAL; + } + + /* + * Initialize NX instance for both high and normal priority FIFOs. + */ + ret = nx_coproc_init(chip_id, ct_842, ct_gzip); + + return ret; +} + +static int __init nx842_powernv_probe(struct device_node *dn) +{ + struct nx_coproc *coproc; + unsigned int ct, ci; + int chip_id; + + chip_id = of_get_ibm_chip_id(dn); + if (chip_id < 0) { + pr_err("ibm,chip-id missing\n"); + return -EINVAL; + } + + if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) { + pr_err("ibm,842-coprocessor-type missing\n"); + return -EINVAL; + } + + if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) { + pr_err("ibm,842-coprocessor-instance missing\n"); + return -EINVAL; + } + + coproc = kzalloc(sizeof(*coproc), GFP_KERNEL); + if (!coproc) + return -ENOMEM; + + coproc->ct = ct; + coproc->ci = ci; + nx_add_coprocs_list(coproc, chip_id); + + pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci); + + if (!nx842_ct) + nx842_ct = ct; + else if (nx842_ct != ct) + pr_err("NX842 chip %d, CT %d != first found CT %d\n", + chip_id, ct, nx842_ct); + + return 0; +} + +static void nx_delete_coprocs(void) +{ + struct nx_coproc *coproc, *n; + struct vas_window *txwin; + int i; + + /* + * close percpu txwins that are opened for the corresponding coproc. + */ + for_each_possible_cpu(i) { + txwin = per_cpu(cpu_txwin, i); + if (txwin) + vas_win_close(txwin); + + per_cpu(cpu_txwin, i) = NULL; + } + + list_for_each_entry_safe(coproc, n, &nx_coprocs, list) { + if (coproc->vas.rxwin) + vas_win_close(coproc->vas.rxwin); + + list_del(&coproc->list); + kfree(coproc); + } +} + +static struct nx842_constraints nx842_powernv_constraints = { + .alignment = DDE_BUFFER_ALIGN, + .multiple = DDE_BUFFER_LAST_MULT, + .minimum = DDE_BUFFER_LAST_MULT, + .maximum = (DDL_LEN_MAX - 1) * PAGE_SIZE, +}; + +static struct nx842_driver nx842_powernv_driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .workmem_size = sizeof(struct nx842_workmem), + .constraints = &nx842_powernv_constraints, + .compress = nx842_powernv_compress, + .decompress = nx842_powernv_decompress, +}; + +static int nx842_powernv_crypto_init(struct crypto_tfm *tfm) +{ + return nx842_crypto_init(tfm, &nx842_powernv_driver); +} + +static struct crypto_alg nx842_powernv_alg = { + .cra_name = "842", + .cra_driver_name = "842-nx", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, + .cra_ctxsize = sizeof(struct nx842_crypto_ctx), + .cra_module = THIS_MODULE, + .cra_init = nx842_powernv_crypto_init, + .cra_exit = nx842_crypto_exit, + .cra_u = { .compress = { + .coa_compress = nx842_crypto_compress, + .coa_decompress = nx842_crypto_decompress } } +}; + +static __init int nx_compress_powernv_init(void) +{ + struct device_node *dn; + int ret; + + /* verify workmem size/align restrictions */ + BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN); + BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN); + BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN); + /* verify buffer size/align restrictions */ + BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN); + BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT); + BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT); + + for_each_compatible_node(dn, NULL, "ibm,power9-nx") { + ret = nx_powernv_probe_vas(dn); + if (ret) { + nx_delete_coprocs(); + of_node_put(dn); + return ret; + } + } + + if (list_empty(&nx_coprocs)) { + for_each_compatible_node(dn, NULL, "ibm,power-nx") + nx842_powernv_probe(dn); + + if (!nx842_ct) + return -ENODEV; + + nx842_powernv_exec = nx842_exec_icswx; + } else { + /* + * Register VAS user space API for NX GZIP so + * that user space can use GZIP engine. + * Using high FIFO priority for kernel requests and + * normal FIFO priority is assigned for userspace. + * 842 compression is supported only in kernel. + */ + ret = vas_register_api_powernv(THIS_MODULE, VAS_COP_TYPE_GZIP, + "nx-gzip"); + + /* + * GZIP is not supported in kernel right now. + * So open tx windows only for 842. + */ + if (!ret) + ret = nx_open_percpu_txwins(); + + if (ret) { + nx_delete_coprocs(); + return ret; + } + + nx842_powernv_exec = nx842_exec_vas; + } + + ret = crypto_register_alg(&nx842_powernv_alg); + if (ret) { + nx_delete_coprocs(); + return ret; + } + + return 0; +} +module_init(nx_compress_powernv_init); + +static void __exit nx_compress_powernv_exit(void) +{ + /* + * GZIP engine is supported only in power9 or later and nx842_ct + * is used on power8 (icswx). + * VAS API for NX GZIP is registered during init for user space + * use. So delete this API use for GZIP engine. + */ + if (!nx842_ct) + vas_unregister_api_powernv(); + + crypto_unregister_alg(&nx842_powernv_alg); + + nx_delete_coprocs(); +} +module_exit(nx_compress_powernv_exit); |