diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/crypto/ux500/hash/Makefile | 11 | ||||
| -rw-r--r-- | drivers/crypto/ux500/hash/hash_alg.h | 398 | ||||
| -rw-r--r-- | drivers/crypto/ux500/hash/hash_core.c | 1966 |
3 files changed, 2375 insertions, 0 deletions
diff --git a/drivers/crypto/ux500/hash/Makefile b/drivers/crypto/ux500/hash/Makefile new file mode 100644 index 000000000..a8f088724 --- /dev/null +++ b/drivers/crypto/ux500/hash/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) ST-Ericsson SA 2010 +# Author: Shujuan Chen (shujuan.chen@stericsson.com) +# +ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG +CFLAGS_hash_core.o := -DDEBUG +endif + +obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += ux500_hash.o +ux500_hash-objs := hash_core.o diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h new file mode 100644 index 000000000..7c9bcc151 --- /dev/null +++ b/drivers/crypto/ux500/hash/hash_alg.h @@ -0,0 +1,398 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen (shujuan.chen@stericsson.com) + * Author: Joakim Bech (joakim.xx.bech@stericsson.com) + * Author: Berne Hebark (berne.hebark@stericsson.com)) + */ +#ifndef _HASH_ALG_H +#define _HASH_ALG_H + +#include <linux/bitops.h> + +#define HASH_BLOCK_SIZE 64 +#define HASH_DMA_FIFO 4 +#define HASH_DMA_ALIGN_SIZE 4 +#define HASH_DMA_PERFORMANCE_MIN_SIZE 1024 +#define HASH_BYTES_PER_WORD 4 + +/* Maximum value of the length's high word */ +#define HASH_HIGH_WORD_MAX_VAL 0xFFFFFFFFUL + +/* Power on Reset values HASH registers */ +#define HASH_RESET_CR_VALUE 0x0 +#define HASH_RESET_STR_VALUE 0x0 + +/* Number of context swap registers */ +#define HASH_CSR_COUNT 52 + +#define HASH_RESET_CSRX_REG_VALUE 0x0 +#define HASH_RESET_CSFULL_REG_VALUE 0x0 +#define HASH_RESET_CSDATAIN_REG_VALUE 0x0 + +#define HASH_RESET_INDEX_VAL 0x0 +#define HASH_RESET_BIT_INDEX_VAL 0x0 +#define HASH_RESET_BUFFER_VAL 0x0 +#define HASH_RESET_LEN_HIGH_VAL 0x0 +#define HASH_RESET_LEN_LOW_VAL 0x0 + +/* Control register bitfields */ +#define HASH_CR_RESUME_MASK 0x11FCF + +#define HASH_CR_SWITCHON_POS 31 +#define HASH_CR_SWITCHON_MASK BIT(31) + +#define HASH_CR_EMPTYMSG_POS 20 +#define HASH_CR_EMPTYMSG_MASK BIT(20) + +#define HASH_CR_DINF_POS 12 +#define HASH_CR_DINF_MASK BIT(12) + +#define HASH_CR_NBW_POS 8 +#define HASH_CR_NBW_MASK 0x00000F00UL + +#define HASH_CR_LKEY_POS 16 +#define HASH_CR_LKEY_MASK BIT(16) + +#define HASH_CR_ALGO_POS 7 +#define HASH_CR_ALGO_MASK BIT(7) + +#define HASH_CR_MODE_POS 6 +#define HASH_CR_MODE_MASK BIT(6) + +#define HASH_CR_DATAFORM_POS 4 +#define HASH_CR_DATAFORM_MASK (BIT(4) | BIT(5)) + +#define HASH_CR_DMAE_POS 3 +#define HASH_CR_DMAE_MASK BIT(3) + +#define HASH_CR_INIT_POS 2 +#define HASH_CR_INIT_MASK BIT(2) + +#define HASH_CR_PRIVN_POS 1 +#define HASH_CR_PRIVN_MASK BIT(1) + +#define HASH_CR_SECN_POS 0 +#define HASH_CR_SECN_MASK BIT(0) + +/* Start register bitfields */ +#define HASH_STR_DCAL_POS 8 +#define HASH_STR_DCAL_MASK BIT(8) +#define HASH_STR_DEFAULT 0x0 + +#define HASH_STR_NBLW_POS 0 +#define HASH_STR_NBLW_MASK 0x0000001FUL + +#define HASH_NBLW_MAX_VAL 0x1F + +/* PrimeCell IDs */ +#define HASH_P_ID0 0xE0 +#define HASH_P_ID1 0x05 +#define HASH_P_ID2 0x38 +#define HASH_P_ID3 0x00 +#define HASH_CELL_ID0 0x0D +#define HASH_CELL_ID1 0xF0 +#define HASH_CELL_ID2 0x05 +#define HASH_CELL_ID3 0xB1 + +#define HASH_SET_BITS(reg_name, mask) \ + writel_relaxed((readl_relaxed(reg_name) | mask), reg_name) + +#define HASH_CLEAR_BITS(reg_name, mask) \ + writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name) + +#define HASH_PUT_BITS(reg, val, shift, mask) \ + writel_relaxed(((readl(reg) & ~(mask)) | \ + (((u32)val << shift) & (mask))), reg) + +#define HASH_SET_DIN(val, len) writesl(&device_data->base->din, (val), (len)) + +#define HASH_INITIALIZE \ + HASH_PUT_BITS( \ + &device_data->base->cr, \ + 0x01, HASH_CR_INIT_POS, \ + HASH_CR_INIT_MASK) + +#define HASH_SET_DATA_FORMAT(data_format) \ + HASH_PUT_BITS( \ + &device_data->base->cr, \ + (u32) (data_format), HASH_CR_DATAFORM_POS, \ + HASH_CR_DATAFORM_MASK) +#define HASH_SET_NBLW(val) \ + HASH_PUT_BITS( \ + &device_data->base->str, \ + (u32) (val), HASH_STR_NBLW_POS, \ + HASH_STR_NBLW_MASK) +#define HASH_SET_DCAL \ + HASH_PUT_BITS( \ + &device_data->base->str, \ + 0x01, HASH_STR_DCAL_POS, \ + HASH_STR_DCAL_MASK) + +/* Hardware access method */ +enum hash_mode { + HASH_MODE_CPU, + HASH_MODE_DMA +}; + +/** + * struct uint64 - Structure to handle 64 bits integers. + * @high_word: Most significant bits. + * @low_word: Least significant bits. + * + * Used to handle 64 bits integers. + */ +struct uint64 { + u32 high_word; + u32 low_word; +}; + +/** + * struct hash_register - Contains all registers in ux500 hash hardware. + * @cr: HASH control register (0x000). + * @din: HASH data input register (0x004). + * @str: HASH start register (0x008). + * @hx: HASH digest register 0..7 (0x00c-0x01C). + * @padding0: Reserved (0x02C). + * @itcr: Integration test control register (0x080). + * @itip: Integration test input register (0x084). + * @itop: Integration test output register (0x088). + * @padding1: Reserved (0x08C). + * @csfull: HASH context full register (0x0F8). + * @csdatain: HASH context swap data input register (0x0FC). + * @csrx: HASH context swap register 0..51 (0x100-0x1CC). + * @padding2: Reserved (0x1D0). + * @periphid0: HASH peripheral identification register 0 (0xFE0). + * @periphid1: HASH peripheral identification register 1 (0xFE4). + * @periphid2: HASH peripheral identification register 2 (0xFE8). + * @periphid3: HASH peripheral identification register 3 (0xFEC). + * @cellid0: HASH PCell identification register 0 (0xFF0). + * @cellid1: HASH PCell identification register 1 (0xFF4). + * @cellid2: HASH PCell identification register 2 (0xFF8). + * @cellid3: HASH PCell identification register 3 (0xFFC). + * + * The device communicates to the HASH via 32-bit-wide control registers + * accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure + * with the registers used. + */ +struct hash_register { + u32 cr; + u32 din; + u32 str; + u32 hx[8]; + + u32 padding0[(0x080 - 0x02C) / sizeof(u32)]; + + u32 itcr; + u32 itip; + u32 itop; + + u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)]; + + u32 csfull; + u32 csdatain; + u32 csrx[HASH_CSR_COUNT]; + + u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)]; + + u32 periphid0; + u32 periphid1; + u32 periphid2; + u32 periphid3; + + u32 cellid0; + u32 cellid1; + u32 cellid2; + u32 cellid3; +}; + +/** + * struct hash_state - Hash context state. + * @temp_cr: Temporary HASH Control Register. + * @str_reg: HASH Start Register. + * @din_reg: HASH Data Input Register. + * @csr[52]: HASH Context Swap Registers 0-39. + * @csfull: HASH Context Swap Registers 40 ie Status flags. + * @csdatain: HASH Context Swap Registers 41 ie Input data. + * @buffer: Working buffer for messages going to the hardware. + * @length: Length of the part of message hashed so far (floor(N/64) * 64). + * @index: Valid number of bytes in buffer (N % 64). + * @bit_index: Valid number of bits in buffer (N % 8). + * + * This structure is used between context switches, i.e. when ongoing jobs are + * interupted with new jobs. When this happens we need to store intermediate + * results in software. + * + * WARNING: "index" is the member of the structure, to be sure that "buffer" + * is aligned on a 4-bytes boundary. This is highly implementation dependent + * and MUST be checked whenever this code is ported on new platforms. + */ +struct hash_state { + u32 temp_cr; + u32 str_reg; + u32 din_reg; + u32 csr[52]; + u32 csfull; + u32 csdatain; + u32 buffer[HASH_BLOCK_SIZE / sizeof(u32)]; + struct uint64 length; + u8 index; + u8 bit_index; +}; + +/** + * enum hash_device_id - HASH device ID. + * @HASH_DEVICE_ID_0: Hash hardware with ID 0 + * @HASH_DEVICE_ID_1: Hash hardware with ID 1 + */ +enum hash_device_id { + HASH_DEVICE_ID_0 = 0, + HASH_DEVICE_ID_1 = 1 +}; + +/** + * enum hash_data_format - HASH data format. + * @HASH_DATA_32_BITS: 32 bits data format + * @HASH_DATA_16_BITS: 16 bits data format + * @HASH_DATA_8_BITS: 8 bits data format. + * @HASH_DATA_1_BITS: 1 bit data format. + */ +enum hash_data_format { + HASH_DATA_32_BITS = 0x0, + HASH_DATA_16_BITS = 0x1, + HASH_DATA_8_BITS = 0x2, + HASH_DATA_1_BIT = 0x3 +}; + +/** + * enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm. + * @HASH_ALGO_SHA1: Indicates that SHA1 is used. + * @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used. + */ +enum hash_algo { + HASH_ALGO_SHA1 = 0x0, + HASH_ALGO_SHA256 = 0x1 +}; + +/** + * enum hash_op - Enumeration for selecting between HASH or HMAC mode. + * @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode. + * @HASH_OPER_MODE_HMAC: Indicates usage of HMAC. + */ +enum hash_op { + HASH_OPER_MODE_HASH = 0x0, + HASH_OPER_MODE_HMAC = 0x1 +}; + +/** + * struct hash_config - Configuration data for the hardware. + * @data_format: Format of data entered into the hash data in register. + * @algorithm: Algorithm selection bit. + * @oper_mode: Operating mode selection bit. + */ +struct hash_config { + int data_format; + int algorithm; + int oper_mode; +}; + +/** + * struct hash_dma - Structure used for dma. + * @mask: DMA capabilities bitmap mask. + * @complete: Used to maintain state for a "completion". + * @chan_mem2hash: DMA channel. + * @cfg_mem2hash: DMA channel configuration. + * @sg_len: Scatterlist length. + * @sg: Scatterlist. + * @nents: Number of sg entries. + */ +struct hash_dma { + dma_cap_mask_t mask; + struct completion complete; + struct dma_chan *chan_mem2hash; + void *cfg_mem2hash; + int sg_len; + struct scatterlist *sg; + int nents; +}; + +/** + * struct hash_ctx - The context used for hash calculations. + * @key: The key used in the operation. + * @keylen: The length of the key. + * @state: The state of the current calculations. + * @config: The current configuration. + * @digestsize: The size of current digest. + * @device: Pointer to the device structure. + */ +struct hash_ctx { + u8 *key; + u32 keylen; + struct hash_config config; + int digestsize; + struct hash_device_data *device; +}; + +/** + * struct hash_ctx - The request context used for hash calculations. + * @state: The state of the current calculations. + * @dma_mode: Used in special cases (workaround), e.g. need to change to + * cpu mode, if not supported/working in dma mode. + * @updated: Indicates if hardware is initialized for new operations. + */ +struct hash_req_ctx { + struct hash_state state; + bool dma_mode; + u8 updated; +}; + +/** + * struct hash_device_data - structure for a hash device. + * @base: Pointer to virtual base address of the hash device. + * @phybase: Pointer to physical memory location of the hash device. + * @list_node: For inclusion in klist. + * @dev: Pointer to the device dev structure. + * @ctx_lock: Spinlock for current_ctx. + * @current_ctx: Pointer to the currently allocated context. + * @power_state: TRUE = power state on, FALSE = power state off. + * @power_state_lock: Spinlock for power_state. + * @regulator: Pointer to the device's power control. + * @clk: Pointer to the device's clock control. + * @restore_dev_state: TRUE = saved state, FALSE = no saved state. + * @dma: Structure used for dma. + */ +struct hash_device_data { + struct hash_register __iomem *base; + phys_addr_t phybase; + struct klist_node list_node; + struct device *dev; + spinlock_t ctx_lock; + struct hash_ctx *current_ctx; + bool power_state; + spinlock_t power_state_lock; + struct regulator *regulator; + struct clk *clk; + bool restore_dev_state; + struct hash_state state; /* Used for saving and resuming state */ + struct hash_dma dma; +}; + +int hash_check_hw(struct hash_device_data *device_data); + +int hash_setconfiguration(struct hash_device_data *device_data, + struct hash_config *config); + +void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx); + +void hash_get_digest(struct hash_device_data *device_data, + u8 *digest, int algorithm); + +int hash_hw_update(struct ahash_request *req); + +int hash_save_state(struct hash_device_data *device_data, + struct hash_state *state); + +int hash_resume_state(struct hash_device_data *device_data, + const struct hash_state *state); + +#endif diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c new file mode 100644 index 000000000..f104e8a43 --- /dev/null +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -0,0 +1,1966 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cryptographic API. + * Support for Nomadik hardware crypto engine. + + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson. + */ + +#define pr_fmt(fmt) "hashX hashX: " fmt + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/klist.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/crypto.h> + +#include <linux/regulator/consumer.h> +#include <linux/dmaengine.h> +#include <linux/bitops.h> + +#include <crypto/internal/hash.h> +#include <crypto/sha1.h> +#include <crypto/sha2.h> +#include <crypto/scatterwalk.h> +#include <crypto/algapi.h> + +#include <linux/platform_data/crypto-ux500.h> + +#include "hash_alg.h" + +static int hash_mode; +module_param(hash_mode, int, 0); +MODULE_PARM_DESC(hash_mode, "CPU or DMA mode. CPU = 0 (default), DMA = 1"); + +/* HMAC-SHA1, no key */ +static const u8 zero_message_hmac_sha1[SHA1_DIGEST_SIZE] = { + 0xfb, 0xdb, 0x1d, 0x1b, 0x18, 0xaa, 0x6c, 0x08, + 0x32, 0x4b, 0x7d, 0x64, 0xb7, 0x1f, 0xb7, 0x63, + 0x70, 0x69, 0x0e, 0x1d +}; + +/* HMAC-SHA256, no key */ +static const u8 zero_message_hmac_sha256[SHA256_DIGEST_SIZE] = { + 0xb6, 0x13, 0x67, 0x9a, 0x08, 0x14, 0xd9, 0xec, + 0x77, 0x2f, 0x95, 0xd7, 0x78, 0xc3, 0x5f, 0xc5, + 0xff, 0x16, 0x97, 0xc4, 0x93, 0x71, 0x56, 0x53, + 0xc6, 0xc7, 0x12, 0x14, 0x42, 0x92, 0xc5, 0xad +}; + +/** + * struct hash_driver_data - data specific to the driver. + * + * @device_list: A list of registered devices to choose from. + * @device_allocation: A semaphore initialized with number of devices. + */ +struct hash_driver_data { + struct klist device_list; + struct semaphore device_allocation; +}; + +static struct hash_driver_data driver_data; + +/* Declaration of functions */ +/** + * hash_messagepad - Pads a message and write the nblw bits. + * @device_data: Structure for the hash device. + * @message: Last word of a message + * @index_bytes: The number of bytes in the last message + * + * This function manages the final part of the digest calculation, when less + * than 512 bits (64 bytes) remain in message. This means index_bytes < 64. + * + */ +static void hash_messagepad(struct hash_device_data *device_data, + const u32 *message, u8 index_bytes); + +/** + * release_hash_device - Releases a previously allocated hash device. + * @device_data: Structure for the hash device. + * + */ +static void release_hash_device(struct hash_device_data *device_data) +{ + spin_lock(&device_data->ctx_lock); + device_data->current_ctx->device = NULL; + device_data->current_ctx = NULL; + spin_unlock(&device_data->ctx_lock); + + /* + * The down_interruptible part for this semaphore is called in + * cryp_get_device_data. + */ + up(&driver_data.device_allocation); +} + +static void hash_dma_setup_channel(struct hash_device_data *device_data, + struct device *dev) +{ + struct hash_platform_data *platform_data = dev->platform_data; + struct dma_slave_config conf = { + .direction = DMA_MEM_TO_DEV, + .dst_addr = device_data->phybase + HASH_DMA_FIFO, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .dst_maxburst = 16, + }; + + dma_cap_zero(device_data->dma.mask); + dma_cap_set(DMA_SLAVE, device_data->dma.mask); + + device_data->dma.cfg_mem2hash = platform_data->mem_to_engine; + device_data->dma.chan_mem2hash = + dma_request_channel(device_data->dma.mask, + platform_data->dma_filter, + device_data->dma.cfg_mem2hash); + + dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf); + + init_completion(&device_data->dma.complete); +} + +static void hash_dma_callback(void *data) +{ + struct hash_ctx *ctx = data; + + complete(&ctx->device->dma.complete); +} + +static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg, + int len, enum dma_data_direction direction) +{ + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *channel = NULL; + + if (direction != DMA_TO_DEVICE) { + dev_err(ctx->device->dev, "%s: Invalid DMA direction\n", + __func__); + return -EFAULT; + } + + sg->length = ALIGN(sg->length, HASH_DMA_ALIGN_SIZE); + + channel = ctx->device->dma.chan_mem2hash; + ctx->device->dma.sg = sg; + ctx->device->dma.sg_len = dma_map_sg(channel->device->dev, + ctx->device->dma.sg, ctx->device->dma.nents, + direction); + + if (!ctx->device->dma.sg_len) { + dev_err(ctx->device->dev, "%s: Could not map the sg list (TO_DEVICE)\n", + __func__); + return -EFAULT; + } + + dev_dbg(ctx->device->dev, "%s: Setting up DMA for buffer (TO_DEVICE)\n", + __func__); + desc = dmaengine_prep_slave_sg(channel, + ctx->device->dma.sg, ctx->device->dma.sg_len, + DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(ctx->device->dev, + "%s: dmaengine_prep_slave_sg() failed!\n", __func__); + return -EFAULT; + } + + desc->callback = hash_dma_callback; + desc->callback_param = ctx; + + dmaengine_submit(desc); + dma_async_issue_pending(channel); + + return 0; +} + +static void hash_dma_done(struct hash_ctx *ctx) +{ + struct dma_chan *chan; + + chan = ctx->device->dma.chan_mem2hash; + dmaengine_terminate_all(chan); + dma_unmap_sg(chan->device->dev, ctx->device->dma.sg, + ctx->device->dma.nents, DMA_TO_DEVICE); +} + +static int hash_dma_write(struct hash_ctx *ctx, + struct scatterlist *sg, int len) +{ + int error = hash_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE); + if (error) { + dev_dbg(ctx->device->dev, + "%s: hash_set_dma_transfer() failed\n", __func__); + return error; + } + + return len; +} + +/** + * get_empty_message_digest - Returns a pre-calculated digest for + * the empty message. + * @device_data: Structure for the hash device. + * @zero_hash: Buffer to return the empty message digest. + * @zero_hash_size: Hash size of the empty message digest. + * @zero_digest: True if zero_digest returned. + */ +static int get_empty_message_digest( + struct hash_device_data *device_data, + u8 *zero_hash, u32 *zero_hash_size, bool *zero_digest) +{ + int ret = 0; + struct hash_ctx *ctx = device_data->current_ctx; + *zero_digest = false; + + /** + * Caller responsible for ctx != NULL. + */ + + if (HASH_OPER_MODE_HASH == ctx->config.oper_mode) { + if (HASH_ALGO_SHA1 == ctx->config.algorithm) { + memcpy(zero_hash, &sha1_zero_message_hash[0], + SHA1_DIGEST_SIZE); + *zero_hash_size = SHA1_DIGEST_SIZE; + *zero_digest = true; + } else if (HASH_ALGO_SHA256 == + ctx->config.algorithm) { + memcpy(zero_hash, &sha256_zero_message_hash[0], + SHA256_DIGEST_SIZE); + *zero_hash_size = SHA256_DIGEST_SIZE; + *zero_digest = true; + } else { + dev_err(device_data->dev, "%s: Incorrect algorithm!\n", + __func__); + ret = -EINVAL; + goto out; + } + } else if (HASH_OPER_MODE_HMAC == ctx->config.oper_mode) { + if (!ctx->keylen) { + if (HASH_ALGO_SHA1 == ctx->config.algorithm) { + memcpy(zero_hash, &zero_message_hmac_sha1[0], + SHA1_DIGEST_SIZE); + *zero_hash_size = SHA1_DIGEST_SIZE; + *zero_digest = true; + } else if (HASH_ALGO_SHA256 == ctx->config.algorithm) { + memcpy(zero_hash, &zero_message_hmac_sha256[0], + SHA256_DIGEST_SIZE); + *zero_hash_size = SHA256_DIGEST_SIZE; + *zero_digest = true; + } else { + dev_err(device_data->dev, "%s: Incorrect algorithm!\n", + __func__); + ret = -EINVAL; + goto out; + } + } else { + dev_dbg(device_data->dev, + "%s: Continue hash calculation, since hmac key available\n", + __func__); + } + } +out: + + return ret; +} + +/** + * hash_disable_power - Request to disable power and clock. + * @device_data: Structure for the hash device. + * @save_device_state: If true, saves the current hw state. + * + * This function request for disabling power (regulator) and clock, + * and could also save current hw state. + */ +static int hash_disable_power(struct hash_device_data *device_data, + bool save_device_state) +{ + int ret = 0; + struct device *dev = device_data->dev; + + spin_lock(&device_data->power_state_lock); + if (!device_data->power_state) + goto out; + + if (save_device_state) { + hash_save_state(device_data, + &device_data->state); + device_data->restore_dev_state = true; + } + + clk_disable(device_data->clk); + ret = regulator_disable(device_data->regulator); + if (ret) + dev_err(dev, "%s: regulator_disable() failed!\n", __func__); + + device_data->power_state = false; + +out: + spin_unlock(&device_data->power_state_lock); + + return ret; +} + +/** + * hash_enable_power - Request to enable power and clock. + * @device_data: Structure for the hash device. + * @restore_device_state: If true, restores a previous saved hw state. + * + * This function request for enabling power (regulator) and clock, + * and could also restore a previously saved hw state. + */ +static int hash_enable_power(struct hash_device_data *device_data, + bool restore_device_state) +{ + int ret = 0; + struct device *dev = device_data->dev; + + spin_lock(&device_data->power_state_lock); + if (!device_data->power_state) { + ret = regulator_enable(device_data->regulator); + if (ret) { + dev_err(dev, "%s: regulator_enable() failed!\n", + __func__); + goto out; + } + ret = clk_enable(device_data->clk); + if (ret) { + dev_err(dev, "%s: clk_enable() failed!\n", __func__); + ret = regulator_disable( + device_data->regulator); + goto out; + } + device_data->power_state = true; + } + + if (device_data->restore_dev_state) { + if (restore_device_state) { + device_data->restore_dev_state = false; + hash_resume_state(device_data, &device_data->state); + } + } +out: + spin_unlock(&device_data->power_state_lock); + + return ret; +} + +/** + * hash_get_device_data - Checks for an available hash device and return it. + * @ctx: Structure for the hash context. + * @device_data: Structure for the hash device. + * + * This function check for an available hash device and return it to + * the caller. + * Note! Caller need to release the device, calling up(). + */ +static int hash_get_device_data(struct hash_ctx *ctx, + struct hash_device_data **device_data) +{ + int ret; + struct klist_iter device_iterator; + struct klist_node *device_node; + struct hash_device_data *local_device_data = NULL; + + /* Wait until a device is available */ + ret = down_interruptible(&driver_data.device_allocation); + if (ret) + return ret; /* Interrupted */ + + /* Select a device */ + klist_iter_init(&driver_data.device_list, &device_iterator); + device_node = klist_next(&device_iterator); + while (device_node) { + local_device_data = container_of(device_node, + struct hash_device_data, list_node); + spin_lock(&local_device_data->ctx_lock); + /* current_ctx allocates a device, NULL = unallocated */ + if (local_device_data->current_ctx) { + device_node = klist_next(&device_iterator); + } else { + local_device_data->current_ctx = ctx; + ctx->device = local_device_data; + spin_unlock(&local_device_data->ctx_lock); + break; + } + spin_unlock(&local_device_data->ctx_lock); + } + klist_iter_exit(&device_iterator); + + if (!device_node) { + /** + * No free device found. + * Since we allocated a device with down_interruptible, this + * should not be able to happen. + * Number of available devices, which are contained in + * device_allocation, is therefore decremented by not doing + * an up(device_allocation). + */ + return -EBUSY; + } + + *device_data = local_device_data; + + return 0; +} + +/** + * hash_hw_write_key - Writes the key to the hardware registries. + * + * @device_data: Structure for the hash device. + * @key: Key to be written. + * @keylen: The lengt of the key. + * + * Note! This function DOES NOT write to the NBLW registry, even though + * specified in the hw design spec. Either due to incorrect info in the + * spec or due to a bug in the hw. + */ +static void hash_hw_write_key(struct hash_device_data *device_data, + const u8 *key, unsigned int keylen) +{ + u32 word = 0; + int nwords = 1; + + HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK); + + while (keylen >= 4) { + u32 *key_word = (u32 *)key; + + HASH_SET_DIN(key_word, nwords); + keylen -= 4; + key += 4; + } + + /* Take care of the remaining bytes in the last word */ + if (keylen) { + word = 0; + while (keylen) { + word |= (key[keylen - 1] << (8 * (keylen - 1))); + keylen--; + } + + HASH_SET_DIN(&word, nwords); + } + + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); + + HASH_SET_DCAL; + + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); +} + +/** + * init_hash_hw - Initialise the hash hardware for a new calculation. + * @device_data: Structure for the hash device. + * @ctx: The hash context. + * + * This function will enable the bits needed to clear and start a new + * calculation. + */ +static int init_hash_hw(struct hash_device_data *device_data, + struct hash_ctx *ctx) +{ + int ret = 0; + + ret = hash_setconfiguration(device_data, &ctx->config); + if (ret) { + dev_err(device_data->dev, "%s: hash_setconfiguration() failed!\n", + __func__); + return ret; + } + + hash_begin(device_data, ctx); + + if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC) + hash_hw_write_key(device_data, ctx->key, ctx->keylen); + + return ret; +} + +/** + * hash_get_nents - Return number of entries (nents) in scatterlist (sg). + * + * @sg: Scatterlist. + * @size: Size in bytes. + * @aligned: True if sg data aligned to work in DMA mode. + * + */ +static int hash_get_nents(struct scatterlist *sg, int size, bool *aligned) +{ + int nents = 0; + bool aligned_data = true; + + while (size > 0 && sg) { + nents++; + size -= sg->length; + + /* hash_set_dma_transfer will align last nent */ + if ((aligned && !IS_ALIGNED(sg->offset, HASH_DMA_ALIGN_SIZE)) || + (!IS_ALIGNED(sg->length, HASH_DMA_ALIGN_SIZE) && size > 0)) + aligned_data = false; + + sg = sg_next(sg); + } + + if (aligned) + *aligned = aligned_data; + + if (size != 0) + return -EFAULT; + + return nents; +} + +/** + * hash_dma_valid_data - checks for dma valid sg data. + * @sg: Scatterlist. + * @datasize: Datasize in bytes. + * + * NOTE! This function checks for dma valid sg data, since dma + * only accept datasizes of even wordsize. + */ +static bool hash_dma_valid_data(struct scatterlist *sg, int datasize) +{ + bool aligned; + + /* Need to include at least one nent, else error */ + if (hash_get_nents(sg, datasize, &aligned) < 1) + return false; + + return aligned; +} + +/** + * ux500_hash_init - Common hash init function for SHA1/SHA2 (SHA256). + * @req: The hash request for the job. + * + * Initialize structures. + */ +static int ux500_hash_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + struct hash_req_ctx *req_ctx = ahash_request_ctx(req); + + if (!ctx->key) + ctx->keylen = 0; + + memset(&req_ctx->state, 0, sizeof(struct hash_state)); + req_ctx->updated = 0; + if (hash_mode == HASH_MODE_DMA) { + if (req->nbytes < HASH_DMA_ALIGN_SIZE) { + req_ctx->dma_mode = false; /* Don't use DMA */ + + pr_debug("%s: DMA mode, but direct to CPU mode for data size < %d\n", + __func__, HASH_DMA_ALIGN_SIZE); + } else { + if (req->nbytes >= HASH_DMA_PERFORMANCE_MIN_SIZE && + hash_dma_valid_data(req->src, req->nbytes)) { + req_ctx->dma_mode = true; + } else { + req_ctx->dma_mode = false; + pr_debug("%s: DMA mode, but use CPU mode for datalength < %d or non-aligned data, except in last nent\n", + __func__, + HASH_DMA_PERFORMANCE_MIN_SIZE); + } + } + } + return 0; +} + +/** + * hash_processblock - This function processes a single block of 512 bits (64 + * bytes), word aligned, starting at message. + * @device_data: Structure for the hash device. + * @message: Block (512 bits) of message to be written to + * the HASH hardware. + * @length: Message length + * + */ +static void hash_processblock(struct hash_device_data *device_data, + const u32 *message, int length) +{ + int len = length / HASH_BYTES_PER_WORD; + /* + * NBLW bits. Reset the number of bits in last word (NBLW). + */ + HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK); + + /* + * Write message data to the HASH_DIN register. + */ + HASH_SET_DIN(message, len); +} + +/** + * hash_messagepad - Pads a message and write the nblw bits. + * @device_data: Structure for the hash device. + * @message: Last word of a message. + * @index_bytes: The number of bytes in the last message. + * + * This function manages the final part of the digest calculation, when less + * than 512 bits (64 bytes) remain in message. This means index_bytes < 64. + * + */ +static void hash_messagepad(struct hash_device_data *device_data, + const u32 *message, u8 index_bytes) +{ + int nwords = 1; + + /* + * Clear hash str register, only clear NBLW + * since DCAL will be reset by hardware. + */ + HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK); + + /* Main loop */ + while (index_bytes >= 4) { + HASH_SET_DIN(message, nwords); + index_bytes -= 4; + message++; + } + + if (index_bytes) + HASH_SET_DIN(message, nwords); + + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); + + /* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */ + HASH_SET_NBLW(index_bytes * 8); + dev_dbg(device_data->dev, "%s: DIN=0x%08x NBLW=%lu\n", + __func__, readl_relaxed(&device_data->base->din), + readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK); + HASH_SET_DCAL; + dev_dbg(device_data->dev, "%s: after dcal -> DIN=0x%08x NBLW=%lu\n", + __func__, readl_relaxed(&device_data->base->din), + readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK); + + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); +} + +/** + * hash_incrementlength - Increments the length of the current message. + * @ctx: Hash context + * @incr: Length of message processed already + * + * Overflow cannot occur, because conditions for overflow are checked in + * hash_hw_update. + */ +static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr) +{ + ctx->state.length.low_word += incr; + + /* Check for wrap-around */ + if (ctx->state.length.low_word < incr) + ctx->state.length.high_word++; +} + +/** + * hash_setconfiguration - Sets the required configuration for the hash + * hardware. + * @device_data: Structure for the hash device. + * @config: Pointer to a configuration structure. + */ +int hash_setconfiguration(struct hash_device_data *device_data, + struct hash_config *config) +{ + int ret = 0; + + if (config->algorithm != HASH_ALGO_SHA1 && + config->algorithm != HASH_ALGO_SHA256) + return -EPERM; + + /* + * DATAFORM bits. Set the DATAFORM bits to 0b11, which means the data + * to be written to HASH_DIN is considered as 32 bits. + */ + HASH_SET_DATA_FORMAT(config->data_format); + + /* + * ALGO bit. Set to 0b1 for SHA-1 and 0b0 for SHA-256 + */ + switch (config->algorithm) { + case HASH_ALGO_SHA1: + HASH_SET_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK); + break; + + case HASH_ALGO_SHA256: + HASH_CLEAR_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK); + break; + + default: + dev_err(device_data->dev, "%s: Incorrect algorithm\n", + __func__); + return -EPERM; + } + + /* + * MODE bit. This bit selects between HASH or HMAC mode for the + * selected algorithm. 0b0 = HASH and 0b1 = HMAC. + */ + if (HASH_OPER_MODE_HASH == config->oper_mode) + HASH_CLEAR_BITS(&device_data->base->cr, + HASH_CR_MODE_MASK); + else if (HASH_OPER_MODE_HMAC == config->oper_mode) { + HASH_SET_BITS(&device_data->base->cr, HASH_CR_MODE_MASK); + if (device_data->current_ctx->keylen > HASH_BLOCK_SIZE) { + /* Truncate key to blocksize */ + dev_dbg(device_data->dev, "%s: LKEY set\n", __func__); + HASH_SET_BITS(&device_data->base->cr, + HASH_CR_LKEY_MASK); + } else { + dev_dbg(device_data->dev, "%s: LKEY cleared\n", + __func__); + HASH_CLEAR_BITS(&device_data->base->cr, + HASH_CR_LKEY_MASK); + } + } else { /* Wrong hash mode */ + ret = -EPERM; + dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n", + __func__); + } + return ret; +} + +/** + * hash_begin - This routine resets some globals and initializes the hash + * hardware. + * @device_data: Structure for the hash device. + * @ctx: Hash context. + */ +void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx) +{ + /* HW and SW initializations */ + /* Note: there is no need to initialize buffer and digest members */ + + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); + + /* + * INIT bit. Set this bit to 0b1 to reset the HASH processor core and + * prepare the initialize the HASH accelerator to compute the message + * digest of a new message. + */ + HASH_INITIALIZE; + + /* + * NBLW bits. Reset the number of bits in last word (NBLW). + */ + HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK); +} + +static int hash_process_data(struct hash_device_data *device_data, + struct hash_ctx *ctx, struct hash_req_ctx *req_ctx, + int msg_length, u8 *data_buffer, u8 *buffer, + u8 *index) +{ + int ret = 0; + u32 count; + + do { + if ((*index + msg_length) < HASH_BLOCK_SIZE) { + for (count = 0; count < msg_length; count++) { + buffer[*index + count] = + *(data_buffer + count); + } + *index += msg_length; + msg_length = 0; + } else { + if (req_ctx->updated) { + ret = hash_resume_state(device_data, + &device_data->state); + memmove(req_ctx->state.buffer, + device_data->state.buffer, + HASH_BLOCK_SIZE); + if (ret) { + dev_err(device_data->dev, + "%s: hash_resume_state() failed!\n", + __func__); + goto out; + } + } else { + ret = init_hash_hw(device_data, ctx); + if (ret) { + dev_err(device_data->dev, + "%s: init_hash_hw() failed!\n", + __func__); + goto out; + } + req_ctx->updated = 1; + } + /* + * If 'data_buffer' is four byte aligned and + * local buffer does not have any data, we can + * write data directly from 'data_buffer' to + * HW peripheral, otherwise we first copy data + * to a local buffer + */ + if (IS_ALIGNED((unsigned long)data_buffer, 4) && + (0 == *index)) + hash_processblock(device_data, + (const u32 *)data_buffer, + HASH_BLOCK_SIZE); + else { + for (count = 0; + count < (u32)(HASH_BLOCK_SIZE - *index); + count++) { + buffer[*index + count] = + *(data_buffer + count); + } + hash_processblock(device_data, + (const u32 *)buffer, + HASH_BLOCK_SIZE); + } + hash_incrementlength(req_ctx, HASH_BLOCK_SIZE); + data_buffer += (HASH_BLOCK_SIZE - *index); + + msg_length -= (HASH_BLOCK_SIZE - *index); + *index = 0; + + ret = hash_save_state(device_data, + &device_data->state); + + memmove(device_data->state.buffer, + req_ctx->state.buffer, + HASH_BLOCK_SIZE); + if (ret) { + dev_err(device_data->dev, "%s: hash_save_state() failed!\n", + __func__); + goto out; + } + } + } while (msg_length != 0); +out: + + return ret; +} + +/** + * hash_dma_final - The hash dma final function for SHA1/SHA256. + * @req: The hash request for the job. + */ +static int hash_dma_final(struct ahash_request *req) +{ + int ret = 0; + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + struct hash_req_ctx *req_ctx = ahash_request_ctx(req); + struct hash_device_data *device_data; + u8 digest[SHA256_DIGEST_SIZE]; + int bytes_written = 0; + + ret = hash_get_device_data(ctx, &device_data); + if (ret) + return ret; + + dev_dbg(device_data->dev, "%s: (ctx=0x%lx)!\n", __func__, + (unsigned long)ctx); + + if (req_ctx->updated) { + ret = hash_resume_state(device_data, &device_data->state); + + if (ret) { + dev_err(device_data->dev, "%s: hash_resume_state() failed!\n", + __func__); + goto out; + } + } else { + ret = hash_setconfiguration(device_data, &ctx->config); + if (ret) { + dev_err(device_data->dev, + "%s: hash_setconfiguration() failed!\n", + __func__); + goto out; + } + + /* Enable DMA input */ + if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) { + HASH_CLEAR_BITS(&device_data->base->cr, + HASH_CR_DMAE_MASK); + } else { + HASH_SET_BITS(&device_data->base->cr, + HASH_CR_DMAE_MASK); + HASH_SET_BITS(&device_data->base->cr, + HASH_CR_PRIVN_MASK); + } + + HASH_INITIALIZE; + + if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC) + hash_hw_write_key(device_data, ctx->key, ctx->keylen); + + /* Number of bits in last word = (nbytes * 8) % 32 */ + HASH_SET_NBLW((req->nbytes * 8) % 32); + req_ctx->updated = 1; + } + + /* Store the nents in the dma struct. */ + ctx->device->dma.nents = hash_get_nents(req->src, req->nbytes, NULL); + if (!ctx->device->dma.nents) { + dev_err(device_data->dev, "%s: ctx->device->dma.nents = 0\n", + __func__); + ret = ctx->device->dma.nents; + goto out; + } + + bytes_written = hash_dma_write(ctx, req->src, req->nbytes); + if (bytes_written != req->nbytes) { + dev_err(device_data->dev, "%s: hash_dma_write() failed!\n", + __func__); + ret = bytes_written; + goto out; + } + + wait_for_completion(&ctx->device->dma.complete); + hash_dma_done(ctx); + + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); + + if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) { + unsigned int keylen = ctx->keylen; + u8 *key = ctx->key; + + dev_dbg(device_data->dev, "%s: keylen: %d\n", + __func__, ctx->keylen); + hash_hw_write_key(device_data, key, keylen); + } + + hash_get_digest(device_data, digest, ctx->config.algorithm); + memcpy(req->result, digest, ctx->digestsize); + +out: + release_hash_device(device_data); + + /** + * Allocated in setkey, and only used in HMAC. + */ + kfree(ctx->key); + + return ret; +} + +/** + * hash_hw_final - The final hash calculation function + * @req: The hash request for the job. + */ +static int hash_hw_final(struct ahash_request *req) +{ + int ret = 0; + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + struct hash_req_ctx *req_ctx = ahash_request_ctx(req); + struct hash_device_data *device_data; + u8 digest[SHA256_DIGEST_SIZE]; + + ret = hash_get_device_data(ctx, &device_data); + if (ret) + return ret; + + dev_dbg(device_data->dev, "%s: (ctx=0x%lx)!\n", __func__, + (unsigned long)ctx); + + if (req_ctx->updated) { + ret = hash_resume_state(device_data, &device_data->state); + + if (ret) { + dev_err(device_data->dev, + "%s: hash_resume_state() failed!\n", __func__); + goto out; + } + } else if (req->nbytes == 0 && ctx->keylen == 0) { + u8 zero_hash[SHA256_DIGEST_SIZE]; + u32 zero_hash_size = 0; + bool zero_digest = false; + /** + * Use a pre-calculated empty message digest + * (workaround since hw return zeroes, hw bug!?) + */ + ret = get_empty_message_digest(device_data, &zero_hash[0], + &zero_hash_size, &zero_digest); + if (!ret && likely(zero_hash_size == ctx->digestsize) && + zero_digest) { + memcpy(req->result, &zero_hash[0], ctx->digestsize); + goto out; + } else if (!ret && !zero_digest) { + dev_dbg(device_data->dev, + "%s: HMAC zero msg with key, continue...\n", + __func__); + } else { + dev_err(device_data->dev, + "%s: ret=%d, or wrong digest size? %s\n", + __func__, ret, + zero_hash_size == ctx->digestsize ? + "true" : "false"); + /* Return error */ + goto out; + } + } else if (req->nbytes == 0 && ctx->keylen > 0) { + ret = -EPERM; + dev_err(device_data->dev, "%s: Empty message with keylength > 0, NOT supported\n", + __func__); + goto out; + } + + if (!req_ctx->updated) { + ret = init_hash_hw(device_data, ctx); + if (ret) { + dev_err(device_data->dev, + "%s: init_hash_hw() failed!\n", __func__); + goto out; + } + } + + if (req_ctx->state.index) { + hash_messagepad(device_data, req_ctx->state.buffer, + req_ctx->state.index); + } else { + HASH_SET_DCAL; + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); + } + + if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) { + unsigned int keylen = ctx->keylen; + u8 *key = ctx->key; + + dev_dbg(device_data->dev, "%s: keylen: %d\n", + __func__, ctx->keylen); + hash_hw_write_key(device_data, key, keylen); + } + + hash_get_digest(device_data, digest, ctx->config.algorithm); + memcpy(req->result, digest, ctx->digestsize); + +out: + release_hash_device(device_data); + + /** + * Allocated in setkey, and only used in HMAC. + */ + kfree(ctx->key); + + return ret; +} + +/** + * hash_hw_update - Updates current HASH computation hashing another part of + * the message. + * @req: Byte array containing the message to be hashed (caller + * allocated). + */ +int hash_hw_update(struct ahash_request *req) +{ + int ret = 0; + u8 index = 0; + u8 *buffer; + struct hash_device_data *device_data; + u8 *data_buffer; + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + struct hash_req_ctx *req_ctx = ahash_request_ctx(req); + struct crypto_hash_walk walk; + int msg_length; + + index = req_ctx->state.index; + buffer = (u8 *)req_ctx->state.buffer; + + ret = hash_get_device_data(ctx, &device_data); + if (ret) + return ret; + + msg_length = crypto_hash_walk_first(req, &walk); + + /* Empty message ("") is correct indata */ + if (msg_length == 0) { + ret = 0; + goto release_dev; + } + + /* Check if ctx->state.length + msg_length + overflows */ + if (msg_length > (req_ctx->state.length.low_word + msg_length) && + HASH_HIGH_WORD_MAX_VAL == req_ctx->state.length.high_word) { + pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__); + ret = crypto_hash_walk_done(&walk, -EPERM); + goto release_dev; + } + + /* Main loop */ + while (0 != msg_length) { + data_buffer = walk.data; + ret = hash_process_data(device_data, ctx, req_ctx, msg_length, + data_buffer, buffer, &index); + + if (ret) { + dev_err(device_data->dev, "%s: hash_internal_hw_update() failed!\n", + __func__); + crypto_hash_walk_done(&walk, ret); + goto release_dev; + } + + msg_length = crypto_hash_walk_done(&walk, 0); + } + + req_ctx->state.index = index; + dev_dbg(device_data->dev, "%s: indata length=%d, bin=%d\n", + __func__, req_ctx->state.index, req_ctx->state.bit_index); + +release_dev: + release_hash_device(device_data); + + return ret; +} + +/** + * hash_resume_state - Function that resumes the state of an calculation. + * @device_data: Pointer to the device structure. + * @device_state: The state to be restored in the hash hardware + */ +int hash_resume_state(struct hash_device_data *device_data, + const struct hash_state *device_state) +{ + u32 temp_cr; + s32 count; + int hash_mode = HASH_OPER_MODE_HASH; + + if (NULL == device_state) { + dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n", + __func__); + return -EPERM; + } + + /* Check correctness of index and length members */ + if (device_state->index > HASH_BLOCK_SIZE || + (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) { + dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n", + __func__); + return -EPERM; + } + + /* + * INIT bit. Set this bit to 0b1 to reset the HASH processor core and + * prepare the initialize the HASH accelerator to compute the message + * digest of a new message. + */ + HASH_INITIALIZE; + + temp_cr = device_state->temp_cr; + writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr); + + if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK) + hash_mode = HASH_OPER_MODE_HMAC; + else + hash_mode = HASH_OPER_MODE_HASH; + + for (count = 0; count < HASH_CSR_COUNT; count++) { + if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH)) + break; + + writel_relaxed(device_state->csr[count], + &device_data->base->csrx[count]); + } + + writel_relaxed(device_state->csfull, &device_data->base->csfull); + writel_relaxed(device_state->csdatain, &device_data->base->csdatain); + + writel_relaxed(device_state->str_reg, &device_data->base->str); + writel_relaxed(temp_cr, &device_data->base->cr); + + return 0; +} + +/** + * hash_save_state - Function that saves the state of hardware. + * @device_data: Pointer to the device structure. + * @device_state: The strucure where the hardware state should be saved. + */ +int hash_save_state(struct hash_device_data *device_data, + struct hash_state *device_state) +{ + u32 temp_cr; + u32 count; + int hash_mode = HASH_OPER_MODE_HASH; + + if (NULL == device_state) { + dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n", + __func__); + return -ENOTSUPP; + } + + /* Write dummy value to force digest intermediate calculation. This + * actually makes sure that there isn't any ongoing calculation in the + * hardware. + */ + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) + cpu_relax(); + + temp_cr = readl_relaxed(&device_data->base->cr); + + device_state->str_reg = readl_relaxed(&device_data->base->str); + + device_state->din_reg = readl_relaxed(&device_data->base->din); + + if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK) + hash_mode = HASH_OPER_MODE_HMAC; + else + hash_mode = HASH_OPER_MODE_HASH; + + for (count = 0; count < HASH_CSR_COUNT; count++) { + if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH)) + break; + + device_state->csr[count] = + readl_relaxed(&device_data->base->csrx[count]); + } + + device_state->csfull = readl_relaxed(&device_data->base->csfull); + device_state->csdatain = readl_relaxed(&device_data->base->csdatain); + + device_state->temp_cr = temp_cr; + + return 0; +} + +/** + * hash_check_hw - This routine checks for peripheral Ids and PCell Ids. + * @device_data: + * + */ +int hash_check_hw(struct hash_device_data *device_data) +{ + /* Checking Peripheral Ids */ + if (HASH_P_ID0 == readl_relaxed(&device_data->base->periphid0) && + HASH_P_ID1 == readl_relaxed(&device_data->base->periphid1) && + HASH_P_ID2 == readl_relaxed(&device_data->base->periphid2) && + HASH_P_ID3 == readl_relaxed(&device_data->base->periphid3) && + HASH_CELL_ID0 == readl_relaxed(&device_data->base->cellid0) && + HASH_CELL_ID1 == readl_relaxed(&device_data->base->cellid1) && + HASH_CELL_ID2 == readl_relaxed(&device_data->base->cellid2) && + HASH_CELL_ID3 == readl_relaxed(&device_data->base->cellid3)) { + return 0; + } + + dev_err(device_data->dev, "%s: HASH_UNSUPPORTED_HW!\n", __func__); + return -ENOTSUPP; +} + +/** + * hash_get_digest - Gets the digest. + * @device_data: Pointer to the device structure. + * @digest: User allocated byte array for the calculated digest. + * @algorithm: The algorithm in use. + */ +void hash_get_digest(struct hash_device_data *device_data, + u8 *digest, int algorithm) +{ + u32 temp_hx_val, count; + int loop_ctr; + + if (algorithm != HASH_ALGO_SHA1 && algorithm != HASH_ALGO_SHA256) { + dev_err(device_data->dev, "%s: Incorrect algorithm %d\n", + __func__, algorithm); + return; + } + + if (algorithm == HASH_ALGO_SHA1) + loop_ctr = SHA1_DIGEST_SIZE / sizeof(u32); + else + loop_ctr = SHA256_DIGEST_SIZE / sizeof(u32); + + dev_dbg(device_data->dev, "%s: digest array:(0x%lx)\n", + __func__, (unsigned long)digest); + + /* Copy result into digest array */ + for (count = 0; count < loop_ctr; count++) { + temp_hx_val = readl_relaxed(&device_data->base->hx[count]); + digest[count * 4] = (u8) ((temp_hx_val >> 24) & 0xFF); + digest[count * 4 + 1] = (u8) ((temp_hx_val >> 16) & 0xFF); + digest[count * 4 + 2] = (u8) ((temp_hx_val >> 8) & 0xFF); + digest[count * 4 + 3] = (u8) ((temp_hx_val >> 0) & 0xFF); + } +} + +/** + * ahash_update - The hash update function for SHA1/SHA2 (SHA256). + * @req: The hash request for the job. + */ +static int ahash_update(struct ahash_request *req) +{ + int ret = 0; + struct hash_req_ctx *req_ctx = ahash_request_ctx(req); + + if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) + ret = hash_hw_update(req); + /* Skip update for DMA, all data will be passed to DMA in final */ + + if (ret) { + pr_err("%s: hash_hw_update() failed!\n", __func__); + } + + return ret; +} + +/** + * ahash_final - The hash final function for SHA1/SHA2 (SHA256). + * @req: The hash request for the job. + */ +static int ahash_final(struct ahash_request *req) +{ + int ret = 0; + struct hash_req_ctx *req_ctx = ahash_request_ctx(req); + + pr_debug("%s: data size: %d\n", __func__, req->nbytes); + + if ((hash_mode == HASH_MODE_DMA) && req_ctx->dma_mode) + ret = hash_dma_final(req); + else + ret = hash_hw_final(req); + + if (ret) { + pr_err("%s: hash_hw/dma_final() failed\n", __func__); + } + + return ret; +} + +static int hash_setkey(struct crypto_ahash *tfm, + const u8 *key, unsigned int keylen, int alg) +{ + int ret = 0; + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + + /** + * Freed in final. + */ + ctx->key = kmemdup(key, keylen, GFP_KERNEL); + if (!ctx->key) { + pr_err("%s: Failed to allocate ctx->key for %d\n", + __func__, alg); + return -ENOMEM; + } + ctx->keylen = keylen; + + return ret; +} + +static int ahash_sha1_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + + ctx->config.data_format = HASH_DATA_8_BITS; + ctx->config.algorithm = HASH_ALGO_SHA1; + ctx->config.oper_mode = HASH_OPER_MODE_HASH; + ctx->digestsize = SHA1_DIGEST_SIZE; + + return ux500_hash_init(req); +} + +static int ahash_sha256_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + + ctx->config.data_format = HASH_DATA_8_BITS; + ctx->config.algorithm = HASH_ALGO_SHA256; + ctx->config.oper_mode = HASH_OPER_MODE_HASH; + ctx->digestsize = SHA256_DIGEST_SIZE; + + return ux500_hash_init(req); +} + +static int ahash_sha1_digest(struct ahash_request *req) +{ + int ret2, ret1; + + ret1 = ahash_sha1_init(req); + if (ret1) + goto out; + + ret1 = ahash_update(req); + ret2 = ahash_final(req); + +out: + return ret1 ? ret1 : ret2; +} + +static int ahash_sha256_digest(struct ahash_request *req) +{ + int ret2, ret1; + + ret1 = ahash_sha256_init(req); + if (ret1) + goto out; + + ret1 = ahash_update(req); + ret2 = ahash_final(req); + +out: + return ret1 ? ret1 : ret2; +} + +static int ahash_noimport(struct ahash_request *req, const void *in) +{ + return -ENOSYS; +} + +static int ahash_noexport(struct ahash_request *req, void *out) +{ + return -ENOSYS; +} + +static int hmac_sha1_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + + ctx->config.data_format = HASH_DATA_8_BITS; + ctx->config.algorithm = HASH_ALGO_SHA1; + ctx->config.oper_mode = HASH_OPER_MODE_HMAC; + ctx->digestsize = SHA1_DIGEST_SIZE; + + return ux500_hash_init(req); +} + +static int hmac_sha256_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct hash_ctx *ctx = crypto_ahash_ctx(tfm); + + ctx->config.data_format = HASH_DATA_8_BITS; + ctx->config.algorithm = HASH_ALGO_SHA256; + ctx->config.oper_mode = HASH_OPER_MODE_HMAC; + ctx->digestsize = SHA256_DIGEST_SIZE; + + return ux500_hash_init(req); +} + +static int hmac_sha1_digest(struct ahash_request *req) +{ + int ret2, ret1; + + ret1 = hmac_sha1_init(req); + if (ret1) + goto out; + + ret1 = ahash_update(req); + ret2 = ahash_final(req); + +out: + return ret1 ? ret1 : ret2; +} + +static int hmac_sha256_digest(struct ahash_request *req) +{ + int ret2, ret1; + + ret1 = hmac_sha256_init(req); + if (ret1) + goto out; + + ret1 = ahash_update(req); + ret2 = ahash_final(req); + +out: + return ret1 ? ret1 : ret2; +} + +static int hmac_sha1_setkey(struct crypto_ahash *tfm, + const u8 *key, unsigned int keylen) +{ + return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA1); +} + +static int hmac_sha256_setkey(struct crypto_ahash *tfm, + const u8 *key, unsigned int keylen) +{ + return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA256); +} + +struct hash_algo_template { + struct hash_config conf; + struct ahash_alg hash; +}; + +static int hash_cra_init(struct crypto_tfm *tfm) +{ + struct hash_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_alg *alg = tfm->__crt_alg; + struct hash_algo_template *hash_alg; + + hash_alg = container_of(__crypto_ahash_alg(alg), + struct hash_algo_template, + hash); + + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), + sizeof(struct hash_req_ctx)); + + ctx->config.data_format = HASH_DATA_8_BITS; + ctx->config.algorithm = hash_alg->conf.algorithm; + ctx->config.oper_mode = hash_alg->conf.oper_mode; + + ctx->digestsize = hash_alg->hash.halg.digestsize; + + return 0; +} + +static struct hash_algo_template hash_algs[] = { + { + .conf.algorithm = HASH_ALGO_SHA1, + .conf.oper_mode = HASH_OPER_MODE_HASH, + .hash = { + .init = ux500_hash_init, + .update = ahash_update, + .final = ahash_final, + .digest = ahash_sha1_digest, + .export = ahash_noexport, + .import = ahash_noimport, + .halg.digestsize = SHA1_DIGEST_SIZE, + .halg.statesize = sizeof(struct hash_ctx), + .halg.base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-ux500", + .cra_flags = CRYPTO_ALG_ASYNC, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct hash_ctx), + .cra_init = hash_cra_init, + .cra_module = THIS_MODULE, + } + } + }, + { + .conf.algorithm = HASH_ALGO_SHA256, + .conf.oper_mode = HASH_OPER_MODE_HASH, + .hash = { + .init = ux500_hash_init, + .update = ahash_update, + .final = ahash_final, + .digest = ahash_sha256_digest, + .export = ahash_noexport, + .import = ahash_noimport, + .halg.digestsize = SHA256_DIGEST_SIZE, + .halg.statesize = sizeof(struct hash_ctx), + .halg.base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-ux500", + .cra_flags = CRYPTO_ALG_ASYNC, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct hash_ctx), + .cra_init = hash_cra_init, + .cra_module = THIS_MODULE, + } + } + }, + { + .conf.algorithm = HASH_ALGO_SHA1, + .conf.oper_mode = HASH_OPER_MODE_HMAC, + .hash = { + .init = ux500_hash_init, + .update = ahash_update, + .final = ahash_final, + .digest = hmac_sha1_digest, + .setkey = hmac_sha1_setkey, + .export = ahash_noexport, + .import = ahash_noimport, + .halg.digestsize = SHA1_DIGEST_SIZE, + .halg.statesize = sizeof(struct hash_ctx), + .halg.base = { + .cra_name = "hmac(sha1)", + .cra_driver_name = "hmac-sha1-ux500", + .cra_flags = CRYPTO_ALG_ASYNC, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct hash_ctx), + .cra_init = hash_cra_init, + .cra_module = THIS_MODULE, + } + } + }, + { + .conf.algorithm = HASH_ALGO_SHA256, + .conf.oper_mode = HASH_OPER_MODE_HMAC, + .hash = { + .init = ux500_hash_init, + .update = ahash_update, + .final = ahash_final, + .digest = hmac_sha256_digest, + .setkey = hmac_sha256_setkey, + .export = ahash_noexport, + .import = ahash_noimport, + .halg.digestsize = SHA256_DIGEST_SIZE, + .halg.statesize = sizeof(struct hash_ctx), + .halg.base = { + .cra_name = "hmac(sha256)", + .cra_driver_name = "hmac-sha256-ux500", + .cra_flags = CRYPTO_ALG_ASYNC, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct hash_ctx), + .cra_init = hash_cra_init, + .cra_module = THIS_MODULE, + } + } + } +}; + +static int ahash_algs_register_all(struct hash_device_data *device_data) +{ + int ret; + int i; + int count; + + for (i = 0; i < ARRAY_SIZE(hash_algs); i++) { + ret = crypto_register_ahash(&hash_algs[i].hash); + if (ret) { + count = i; + dev_err(device_data->dev, "%s: alg registration failed\n", + hash_algs[i].hash.halg.base.cra_driver_name); + goto unreg; + } + } + return 0; +unreg: + for (i = 0; i < count; i++) + crypto_unregister_ahash(&hash_algs[i].hash); + return ret; +} + +static void ahash_algs_unregister_all(struct hash_device_data *device_data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hash_algs); i++) + crypto_unregister_ahash(&hash_algs[i].hash); +} + +/** + * ux500_hash_probe - Function that probes the hash hardware. + * @pdev: The platform device. + */ +static int ux500_hash_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res = NULL; + struct hash_device_data *device_data; + struct device *dev = &pdev->dev; + + device_data = devm_kzalloc(dev, sizeof(*device_data), GFP_KERNEL); + if (!device_data) { + ret = -ENOMEM; + goto out; + } + + device_data->dev = dev; + device_data->current_ctx = NULL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(dev, "%s: platform_get_resource() failed!\n", __func__); + ret = -ENODEV; + goto out; + } + + device_data->phybase = res->start; + device_data->base = devm_ioremap_resource(dev, res); + if (IS_ERR(device_data->base)) { + ret = PTR_ERR(device_data->base); + goto out; + } + spin_lock_init(&device_data->ctx_lock); + spin_lock_init(&device_data->power_state_lock); + + /* Enable power for HASH1 hardware block */ + device_data->regulator = regulator_get(dev, "v-ape"); + if (IS_ERR(device_data->regulator)) { + dev_err(dev, "%s: regulator_get() failed!\n", __func__); + ret = PTR_ERR(device_data->regulator); + device_data->regulator = NULL; + goto out; + } + + /* Enable the clock for HASH1 hardware block */ + device_data->clk = devm_clk_get(dev, NULL); + if (IS_ERR(device_data->clk)) { + dev_err(dev, "%s: clk_get() failed!\n", __func__); + ret = PTR_ERR(device_data->clk); + goto out_regulator; + } + + ret = clk_prepare(device_data->clk); + if (ret) { + dev_err(dev, "%s: clk_prepare() failed!\n", __func__); + goto out_regulator; + } + + /* Enable device power (and clock) */ + ret = hash_enable_power(device_data, false); + if (ret) { + dev_err(dev, "%s: hash_enable_power() failed!\n", __func__); + goto out_clk_unprepare; + } + + ret = hash_check_hw(device_data); + if (ret) { + dev_err(dev, "%s: hash_check_hw() failed!\n", __func__); + goto out_power; + } + + if (hash_mode == HASH_MODE_DMA) + hash_dma_setup_channel(device_data, dev); + + platform_set_drvdata(pdev, device_data); + + /* Put the new device into the device list... */ + klist_add_tail(&device_data->list_node, &driver_data.device_list); + /* ... and signal that a new device is available. */ + up(&driver_data.device_allocation); + + ret = ahash_algs_register_all(device_data); + if (ret) { + dev_err(dev, "%s: ahash_algs_register_all() failed!\n", + __func__); + goto out_power; + } + + dev_info(dev, "successfully registered\n"); + return 0; + +out_power: + hash_disable_power(device_data, false); + +out_clk_unprepare: + clk_unprepare(device_data->clk); + +out_regulator: + regulator_put(device_data->regulator); + +out: + return ret; +} + +/** + * ux500_hash_remove - Function that removes the hash device from the platform. + * @pdev: The platform device. + */ +static int ux500_hash_remove(struct platform_device *pdev) +{ + struct hash_device_data *device_data; + struct device *dev = &pdev->dev; + + device_data = platform_get_drvdata(pdev); + if (!device_data) { + dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__); + return -ENOMEM; + } + + /* Try to decrease the number of available devices. */ + if (down_trylock(&driver_data.device_allocation)) + return -EBUSY; + + /* Check that the device is free */ + spin_lock(&device_data->ctx_lock); + /* current_ctx allocates a device, NULL = unallocated */ + if (device_data->current_ctx) { + /* The device is busy */ + spin_unlock(&device_data->ctx_lock); + /* Return the device to the pool. */ + up(&driver_data.device_allocation); + return -EBUSY; + } + + spin_unlock(&device_data->ctx_lock); + + /* Remove the device from the list */ + if (klist_node_attached(&device_data->list_node)) + klist_remove(&device_data->list_node); + + /* If this was the last device, remove the services */ + if (list_empty(&driver_data.device_list.k_list)) + ahash_algs_unregister_all(device_data); + + if (hash_disable_power(device_data, false)) + dev_err(dev, "%s: hash_disable_power() failed\n", + __func__); + + clk_unprepare(device_data->clk); + regulator_put(device_data->regulator); + + return 0; +} + +/** + * ux500_hash_shutdown - Function that shutdown the hash device. + * @pdev: The platform device + */ +static void ux500_hash_shutdown(struct platform_device *pdev) +{ + struct hash_device_data *device_data; + + device_data = platform_get_drvdata(pdev); + if (!device_data) { + dev_err(&pdev->dev, "%s: platform_get_drvdata() failed!\n", + __func__); + return; + } + + /* Check that the device is free */ + spin_lock(&device_data->ctx_lock); + /* current_ctx allocates a device, NULL = unallocated */ + if (!device_data->current_ctx) { + if (down_trylock(&driver_data.device_allocation)) + dev_dbg(&pdev->dev, "%s: Cryp still in use! Shutting down anyway...\n", + __func__); + /** + * (Allocate the device) + * Need to set this to non-null (dummy) value, + * to avoid usage if context switching. + */ + device_data->current_ctx++; + } + spin_unlock(&device_data->ctx_lock); + + /* Remove the device from the list */ + if (klist_node_attached(&device_data->list_node)) + klist_remove(&device_data->list_node); + + /* If this was the last device, remove the services */ + if (list_empty(&driver_data.device_list.k_list)) + ahash_algs_unregister_all(device_data); + + if (hash_disable_power(device_data, false)) + dev_err(&pdev->dev, "%s: hash_disable_power() failed\n", + __func__); +} + +#ifdef CONFIG_PM_SLEEP +/** + * ux500_hash_suspend - Function that suspends the hash device. + * @dev: Device to suspend. + */ +static int ux500_hash_suspend(struct device *dev) +{ + int ret; + struct hash_device_data *device_data; + struct hash_ctx *temp_ctx = NULL; + + device_data = dev_get_drvdata(dev); + if (!device_data) { + dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__); + return -ENOMEM; + } + + spin_lock(&device_data->ctx_lock); + if (!device_data->current_ctx) + device_data->current_ctx++; + spin_unlock(&device_data->ctx_lock); + + if (device_data->current_ctx == ++temp_ctx) { + if (down_interruptible(&driver_data.device_allocation)) + dev_dbg(dev, "%s: down_interruptible() failed\n", + __func__); + ret = hash_disable_power(device_data, false); + + } else { + ret = hash_disable_power(device_data, true); + } + + if (ret) + dev_err(dev, "%s: hash_disable_power()\n", __func__); + + return ret; +} + +/** + * ux500_hash_resume - Function that resume the hash device. + * @dev: Device to resume. + */ +static int ux500_hash_resume(struct device *dev) +{ + int ret = 0; + struct hash_device_data *device_data; + struct hash_ctx *temp_ctx = NULL; + + device_data = dev_get_drvdata(dev); + if (!device_data) { + dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__); + return -ENOMEM; + } + + spin_lock(&device_data->ctx_lock); + if (device_data->current_ctx == ++temp_ctx) + device_data->current_ctx = NULL; + spin_unlock(&device_data->ctx_lock); + + if (!device_data->current_ctx) + up(&driver_data.device_allocation); + else + ret = hash_enable_power(device_data, true); + + if (ret) + dev_err(dev, "%s: hash_enable_power() failed!\n", __func__); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume); + +static const struct of_device_id ux500_hash_match[] = { + { .compatible = "stericsson,ux500-hash" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ux500_hash_match); + +static struct platform_driver hash_driver = { + .probe = ux500_hash_probe, + .remove = ux500_hash_remove, + .shutdown = ux500_hash_shutdown, + .driver = { + .name = "hash1", + .of_match_table = ux500_hash_match, + .pm = &ux500_hash_pm, + } +}; + +/** + * ux500_hash_mod_init - The kernel module init function. + */ +static int __init ux500_hash_mod_init(void) +{ + klist_init(&driver_data.device_list, NULL, NULL); + /* Initialize the semaphore to 0 devices (locked state) */ + sema_init(&driver_data.device_allocation, 0); + + return platform_driver_register(&hash_driver); +} + +/** + * ux500_hash_mod_fini - The kernel module exit function. + */ +static void __exit ux500_hash_mod_fini(void) +{ + platform_driver_unregister(&hash_driver); +} + +module_init(ux500_hash_mod_init); +module_exit(ux500_hash_mod_fini); + +MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine."); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS_CRYPTO("sha1-all"); +MODULE_ALIAS_CRYPTO("sha256-all"); +MODULE_ALIAS_CRYPTO("hmac-sha1-all"); +MODULE_ALIAS_CRYPTO("hmac-sha256-all"); |