summaryrefslogtreecommitdiffstats
path: root/drivers/edac/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/edac/Kconfig')
-rw-r--r--drivers/edac/Kconfig544
1 files changed, 544 insertions, 0 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
new file mode 100644
index 000000000..456602d37
--- /dev/null
+++ b/drivers/edac/Kconfig
@@ -0,0 +1,544 @@
+#
+# EDAC Kconfig
+# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
+# Licensed and distributed under the GPL
+
+config EDAC_ATOMIC_SCRUB
+ bool
+
+config EDAC_SUPPORT
+ bool
+
+menuconfig EDAC
+ tristate "EDAC (Error Detection And Correction) reporting"
+ depends on HAS_IOMEM && EDAC_SUPPORT && RAS
+ help
+ EDAC is a subsystem along with hardware-specific drivers designed to
+ report hardware errors. These are low-level errors that are reported
+ in the CPU or supporting chipset or other subsystems:
+ memory errors, cache errors, PCI errors, thermal throttling, etc..
+ If unsure, select 'Y'.
+
+ The mailing list for the EDAC project is linux-edac@vger.kernel.org.
+
+if EDAC
+
+config EDAC_LEGACY_SYSFS
+ bool "EDAC legacy sysfs"
+ default y
+ help
+ Enable the compatibility sysfs nodes.
+ Use 'Y' if your edac utilities aren't ported to work with the newer
+ structures.
+
+config EDAC_DEBUG
+ bool "Debugging"
+ select DEBUG_FS
+ help
+ This turns on debugging information for the entire EDAC subsystem.
+ You do so by inserting edac_module with "edac_debug_level=x." Valid
+ levels are 0-4 (from low to high) and by default it is set to 2.
+ Usually you should select 'N' here.
+
+config EDAC_DECODE_MCE
+ tristate "Decode MCEs in human-readable form (only on AMD for now)"
+ depends on CPU_SUP_AMD && X86_MCE_AMD
+ default y
+ help
+ Enable this option if you want to decode Machine Check Exceptions
+ occurring on your machine in human-readable form.
+
+ You should definitely say Y here in case you want to decode MCEs
+ which occur really early upon boot, before the module infrastructure
+ has been initialized.
+
+config EDAC_GHES
+ bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
+ depends on ACPI_APEI_GHES && (EDAC=y)
+ select UEFI_CPER
+ help
+ Not all machines support hardware-driven error report. Some of those
+ provide a BIOS-driven error report mechanism via ACPI, using the
+ APEI/GHES driver. By enabling this option, the error reports provided
+ by GHES are sent to userspace via the EDAC API.
+
+ When this option is enabled, it will disable the hardware-driven
+ mechanisms, if a GHES BIOS is detected, entering into the
+ "Firmware First" mode.
+
+ It should be noticed that keeping both GHES and a hardware-driven
+ error mechanism won't work well, as BIOS will race with OS, while
+ reading the error registers. So, if you want to not use "Firmware
+ first" GHES error mechanism, you should disable GHES either at
+ compilation time or by passing "ghes.disable=1" Kernel parameter
+ at boot time.
+
+ In doubt, say 'Y'.
+
+config EDAC_AMD64
+ tristate "AMD64 (Opteron, Athlon64)"
+ depends on AMD_NB && EDAC_DECODE_MCE
+ help
+ Support for error detection and correction of DRAM ECC errors on
+ the AMD64 families (>= K8) of memory controllers.
+
+ When EDAC_DEBUG is enabled, hardware error injection facilities
+ through sysfs are available:
+
+ AMD CPUs up to and excluding family 0x17 provide for Memory
+ Error Injection into the ECC detection circuits. The amd64_edac
+ module allows the operator/user to inject Uncorrectable and
+ Correctable errors into DRAM.
+
+ When enabled, in each of the respective memory controller directories
+ (/sys/devices/system/edac/mc/mcX), there are 3 input files:
+
+ - inject_section (0..3, 16-byte section of 64-byte cacheline),
+ - inject_word (0..8, 16-bit word of 16-byte section),
+ - inject_ecc_vector (hex ecc vector: select bits of inject word)
+
+ In addition, there are two control files, inject_read and inject_write,
+ which trigger the DRAM ECC Read and Write respectively.
+
+config EDAC_AL_MC
+ tristate "Amazon's Annapurna Lab Memory Controller"
+ depends on (ARCH_ALPINE || COMPILE_TEST)
+ help
+ Support for error detection and correction for Amazon's Annapurna
+ Labs Alpine chips which allow 1 bit correction and 2 bits detection.
+
+config EDAC_AMD76X
+ tristate "AMD 76x (760, 762, 768)"
+ depends on PCI && X86_32
+ help
+ Support for error detection and correction on the AMD 76x
+ series of chipsets used with the Athlon processor.
+
+config EDAC_E7XXX
+ tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
+ depends on PCI && X86_32
+ help
+ Support for error detection and correction on the Intel
+ E7205, E7500, E7501 and E7505 server chipsets.
+
+config EDAC_E752X
+ tristate "Intel e752x (e7520, e7525, e7320) and 3100"
+ depends on PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ E7520, E7525, E7320 server chipsets.
+
+config EDAC_I82443BXGX
+ tristate "Intel 82443BX/GX (440BX/GX)"
+ depends on PCI && X86_32
+ depends on BROKEN
+ help
+ Support for error detection and correction on the Intel
+ 82443BX/GX memory controllers (440BX/GX chipsets).
+
+config EDAC_I82875P
+ tristate "Intel 82875p (D82875P, E7210)"
+ depends on PCI && X86_32
+ help
+ Support for error detection and correction on the Intel
+ DP82785P and E7210 server chipsets.
+
+config EDAC_I82975X
+ tristate "Intel 82975x (D82975x)"
+ depends on PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ DP82975x server chipsets.
+
+config EDAC_I3000
+ tristate "Intel 3000/3010"
+ depends on PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ 3000 and 3010 server chipsets.
+
+config EDAC_I3200
+ tristate "Intel 3200"
+ depends on PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ 3200 and 3210 server chipsets.
+
+config EDAC_IE31200
+ tristate "Intel e312xx"
+ depends on PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ E3-1200 based DRAM controllers.
+
+config EDAC_X38
+ tristate "Intel X38"
+ depends on PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ X38 server chipsets.
+
+config EDAC_I5400
+ tristate "Intel 5400 (Seaburg) chipsets"
+ depends on PCI && X86
+ help
+ Support for error detection and correction the Intel
+ i5400 MCH chipset (Seaburg).
+
+config EDAC_I7CORE
+ tristate "Intel i7 Core (Nehalem) processors"
+ depends on PCI && X86 && X86_MCE_INTEL
+ help
+ Support for error detection and correction the Intel
+ i7 Core (Nehalem) Integrated Memory Controller that exists on
+ newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+ and Xeon 55xx processors.
+
+config EDAC_I82860
+ tristate "Intel 82860"
+ depends on PCI && X86_32
+ help
+ Support for error detection and correction on the Intel
+ 82860 chipset.
+
+config EDAC_R82600
+ tristate "Radisys 82600 embedded chipset"
+ depends on PCI && X86_32
+ help
+ Support for error detection and correction on the Radisys
+ 82600 embedded chipset.
+
+config EDAC_I5000
+ tristate "Intel Greencreek/Blackford chipset"
+ depends on X86 && PCI
+ help
+ Support for error detection and correction the Intel
+ Greekcreek/Blackford chipsets.
+
+config EDAC_I5100
+ tristate "Intel San Clemente MCH"
+ depends on X86 && PCI
+ help
+ Support for error detection and correction the Intel
+ San Clemente MCH.
+
+config EDAC_I7300
+ tristate "Intel Clarksboro MCH"
+ depends on X86 && PCI
+ help
+ Support for error detection and correction the Intel
+ Clarksboro MCH (Intel 7300 chipset).
+
+config EDAC_SBRIDGE
+ tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC"
+ depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+ help
+ Support for error detection and correction the Intel
+ Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
+
+config EDAC_SKX
+ tristate "Intel Skylake server Integrated MC"
+ depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
+ depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
+ select DMI
+ select ACPI_ADXL
+ help
+ Support for error detection and correction the Intel
+ Skylake server Integrated Memory Controllers. If your
+ system has non-volatile DIMMs you should also manually
+ select CONFIG_ACPI_NFIT.
+
+config EDAC_I10NM
+ tristate "Intel 10nm server Integrated MC"
+ depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
+ depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y
+ select DMI
+ select ACPI_ADXL
+ help
+ Support for error detection and correction the Intel
+ 10nm server Integrated Memory Controllers. If your
+ system has non-volatile DIMMs you should also manually
+ select CONFIG_ACPI_NFIT.
+
+config EDAC_PND2
+ tristate "Intel Pondicherry2"
+ depends on PCI && X86_64 && X86_MCE_INTEL
+ select P2SB if X86
+ help
+ Support for error detection and correction on the Intel
+ Pondicherry2 Integrated Memory Controller. This SoC IP is
+ first used on the Apollo Lake platform and Denverton
+ micro-server but may appear on others in the future.
+
+config EDAC_IGEN6
+ tristate "Intel client SoC Integrated MC"
+ depends on PCI && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG
+ depends on X86_64 && X86_MCE_INTEL
+ help
+ Support for error detection and correction on the Intel
+ client SoC Integrated Memory Controller using In-Band ECC IP.
+ This In-Band ECC is first used on the Elkhart Lake SoC but
+ may appear on others in the future.
+
+config EDAC_MPC85XX
+ bool "Freescale MPC83xx / MPC85xx"
+ depends on FSL_SOC && EDAC=y
+ help
+ Support for error detection and correction on the Freescale
+ MPC8349, MPC8560, MPC8540, MPC8548, T4240
+
+config EDAC_LAYERSCAPE
+ tristate "Freescale Layerscape DDR"
+ depends on ARCH_LAYERSCAPE || SOC_LS1021A
+ help
+ Support for error detection and correction on Freescale memory
+ controllers on Layerscape SoCs.
+
+config EDAC_PASEMI
+ tristate "PA Semi PWRficient"
+ depends on PPC_PASEMI && PCI
+ help
+ Support for error detection and correction on PA Semi
+ PWRficient.
+
+config EDAC_CELL
+ tristate "Cell Broadband Engine memory controller"
+ depends on PPC_CELL_COMMON
+ help
+ Support for error detection and correction on the
+ Cell Broadband Engine internal memory controller
+ on platform without a hypervisor
+
+config EDAC_PPC4XX
+ tristate "PPC4xx IBM DDR2 Memory Controller"
+ depends on 4xx
+ help
+ This enables support for EDAC on the ECC memory used
+ with the IBM DDR2 memory controller found in various
+ PowerPC 4xx embedded processors such as the 405EX[r],
+ 440SP, 440SPe, 460EX, 460GT and 460SX.
+
+config EDAC_AMD8131
+ tristate "AMD8131 HyperTransport PCI-X Tunnel"
+ depends on PCI && PPC_MAPLE
+ help
+ Support for error detection and correction on the
+ AMD8131 HyperTransport PCI-X Tunnel chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
+
+config EDAC_AMD8111
+ tristate "AMD8111 HyperTransport I/O Hub"
+ depends on PCI && PPC_MAPLE
+ help
+ Support for error detection and correction on the
+ AMD8111 HyperTransport I/O Hub chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
+
+config EDAC_CPC925
+ tristate "IBM CPC925 Memory Controller (PPC970FX)"
+ depends on PPC64
+ help
+ Support for error detection and correction on the
+ IBM CPC925 Bridge and Memory Controller, which is
+ a companion chip to the PowerPC 970 family of
+ processors.
+
+config EDAC_HIGHBANK_MC
+ tristate "Highbank Memory Controller"
+ depends on ARCH_HIGHBANK
+ help
+ Support for error detection and correction on the
+ Calxeda Highbank memory controller.
+
+config EDAC_HIGHBANK_L2
+ tristate "Highbank L2 Cache"
+ depends on ARCH_HIGHBANK
+ help
+ Support for error detection and correction on the
+ Calxeda Highbank memory controller.
+
+config EDAC_OCTEON_PC
+ tristate "Cavium Octeon Primary Caches"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ Support for error detection and correction on the primary caches of
+ the cnMIPS cores of Cavium Octeon family SOCs.
+
+config EDAC_OCTEON_L2C
+ tristate "Cavium Octeon Secondary Caches (L2C)"
+ depends on CAVIUM_OCTEON_SOC
+ help
+ Support for error detection and correction on the
+ Cavium Octeon family of SOCs.
+
+config EDAC_OCTEON_LMC
+ tristate "Cavium Octeon DRAM Memory Controller (LMC)"
+ depends on CAVIUM_OCTEON_SOC
+ help
+ Support for error detection and correction on the
+ Cavium Octeon family of SOCs.
+
+config EDAC_OCTEON_PCI
+ tristate "Cavium Octeon PCI Controller"
+ depends on PCI && CAVIUM_OCTEON_SOC
+ help
+ Support for error detection and correction on the
+ Cavium Octeon family of SOCs.
+
+config EDAC_THUNDERX
+ tristate "Cavium ThunderX EDAC"
+ depends on ARM64
+ depends on PCI
+ help
+ Support for error detection and correction on the
+ Cavium ThunderX memory controllers (LMC), Cache
+ Coherent Processor Interconnect (CCPI) and L2 cache
+ blocks (TAD, CBC, MCI).
+
+config EDAC_ALTERA
+ bool "Altera SOCFPGA ECC"
+ depends on EDAC=y && ARCH_INTEL_SOCFPGA
+ help
+ Support for error detection and correction on the
+ Altera SOCs. This is the global enable for the
+ various Altera peripherals.
+
+config EDAC_ALTERA_SDRAM
+ bool "Altera SDRAM ECC"
+ depends on EDAC_ALTERA=y
+ help
+ Support for error detection and correction on the
+ Altera SDRAM Memory for Altera SoCs. Note that the
+ preloader must initialize the SDRAM before loading
+ the kernel.
+
+config EDAC_ALTERA_L2C
+ bool "Altera L2 Cache ECC"
+ depends on EDAC_ALTERA=y && CACHE_L2X0
+ help
+ Support for error detection and correction on the
+ Altera L2 cache Memory for Altera SoCs. This option
+ requires L2 cache.
+
+config EDAC_ALTERA_OCRAM
+ bool "Altera On-Chip RAM ECC"
+ depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR
+ help
+ Support for error detection and correction on the
+ Altera On-Chip RAM Memory for Altera SoCs.
+
+config EDAC_ALTERA_ETHERNET
+ bool "Altera Ethernet FIFO ECC"
+ depends on EDAC_ALTERA=y
+ help
+ Support for error detection and correction on the
+ Altera Ethernet FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_NAND
+ bool "Altera NAND FIFO ECC"
+ depends on EDAC_ALTERA=y && MTD_NAND_DENALI
+ help
+ Support for error detection and correction on the
+ Altera NAND FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_DMA
+ bool "Altera DMA FIFO ECC"
+ depends on EDAC_ALTERA=y && PL330_DMA=y
+ help
+ Support for error detection and correction on the
+ Altera DMA FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_USB
+ bool "Altera USB FIFO ECC"
+ depends on EDAC_ALTERA=y && USB_DWC2
+ help
+ Support for error detection and correction on the
+ Altera USB FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_QSPI
+ bool "Altera QSPI FIFO ECC"
+ depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI
+ help
+ Support for error detection and correction on the
+ Altera QSPI FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_SDMMC
+ bool "Altera SDMMC FIFO ECC"
+ depends on EDAC_ALTERA=y && MMC_DW
+ help
+ Support for error detection and correction on the
+ Altera SDMMC FIFO Memory for Altera SoCs.
+
+config EDAC_SIFIVE
+ bool "Sifive platform EDAC driver"
+ depends on EDAC=y && SIFIVE_CCACHE
+ help
+ Support for error detection and correction on the SiFive SoCs.
+
+config EDAC_ARMADA_XP
+ bool "Marvell Armada XP DDR and L2 Cache ECC"
+ depends on MACH_MVEBU_V7
+ help
+ Support for error correction and detection on the Marvell Aramada XP
+ DDR RAM and L2 cache controllers.
+
+config EDAC_SYNOPSYS
+ tristate "Synopsys DDR Memory Controller"
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || ARCH_MXC
+ help
+ Support for error detection and correction on the Synopsys DDR
+ memory controller.
+
+config EDAC_XGENE
+ tristate "APM X-Gene SoC"
+ depends on (ARM64 || COMPILE_TEST)
+ help
+ Support for error detection and correction on the
+ APM X-Gene family of SOCs.
+
+config EDAC_TI
+ tristate "Texas Instruments DDR3 ECC Controller"
+ depends on ARCH_KEYSTONE || SOC_DRA7XX
+ help
+ Support for error detection and correction on the TI SoCs.
+
+config EDAC_QCOM
+ tristate "QCOM EDAC Controller"
+ depends on ARCH_QCOM && QCOM_LLCC
+ help
+ Support for error detection and correction on the
+ Qualcomm Technologies, Inc. SoCs.
+
+ This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs).
+ As of now, it supports error reporting for Last Level Cache Controller (LLCC)
+ of Tag RAM and Data RAM.
+
+ For debugging issues having to do with stability and overall system
+ health, you should probably say 'Y' here.
+
+config EDAC_ASPEED
+ tristate "Aspeed AST BMC SoC"
+ depends on ARCH_ASPEED
+ help
+ Support for error detection and correction on the Aspeed AST BMC SoC.
+
+ First, ECC must be configured in the bootloader. Then, this driver
+ will expose error counters via the EDAC kernel framework.
+
+config EDAC_BLUEFIELD
+ tristate "Mellanox BlueField Memory ECC"
+ depends on ARM64 && ((MELLANOX_PLATFORM && ACPI) || COMPILE_TEST)
+ help
+ Support for error detection and correction on the
+ Mellanox BlueField SoCs.
+
+config EDAC_DMC520
+ tristate "ARM DMC-520 ECC"
+ depends on ARM64
+ help
+ Support for error detection and correction on the
+ SoCs with ARM DMC-520 DRAM controller.
+
+endif # EDAC