diff options
Diffstat (limited to 'drivers/gpu/drm/drm_connector.c')
| -rw-r--r-- | drivers/gpu/drm/drm_connector.c | 2965 |
1 files changed, 2965 insertions, 0 deletions
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c new file mode 100644 index 000000000..27de2a97f --- /dev/null +++ b/drivers/gpu/drm/drm_connector.c @@ -0,0 +1,2965 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <drm/drm_auth.h> +#include <drm/drm_connector.h> +#include <drm/drm_drv.h> +#include <drm/drm_edid.h> +#include <drm/drm_encoder.h> +#include <drm/drm_file.h> +#include <drm/drm_managed.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> +#include <drm/drm_privacy_screen_consumer.h> +#include <drm/drm_sysfs.h> +#include <drm/drm_utils.h> + +#include <linux/fb.h> +#include <linux/uaccess.h> + +#include "drm_crtc_internal.h" +#include "drm_internal.h" + +/** + * DOC: overview + * + * In DRM connectors are the general abstraction for display sinks, and include + * also fixed panels or anything else that can display pixels in some form. As + * opposed to all other KMS objects representing hardware (like CRTC, encoder or + * plane abstractions) connectors can be hotplugged and unplugged at runtime. + * Hence they are reference-counted using drm_connector_get() and + * drm_connector_put(). + * + * KMS driver must create, initialize, register and attach at a &struct + * drm_connector for each such sink. The instance is created as other KMS + * objects and initialized by setting the following fields. The connector is + * initialized with a call to drm_connector_init() with a pointer to the + * &struct drm_connector_funcs and a connector type, and then exposed to + * userspace with a call to drm_connector_register(). + * + * Connectors must be attached to an encoder to be used. For devices that map + * connectors to encoders 1:1, the connector should be attached at + * initialization time with a call to drm_connector_attach_encoder(). The + * driver must also set the &drm_connector.encoder field to point to the + * attached encoder. + * + * For connectors which are not fixed (like built-in panels) the driver needs to + * support hotplug notifications. The simplest way to do that is by using the + * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have + * hardware support for hotplug interrupts. Connectors with hardware hotplug + * support can instead use e.g. drm_helper_hpd_irq_event(). + */ + +/* + * Global connector list for drm_connector_find_by_fwnode(). + * Note drm_connector_[un]register() first take connector->lock and then + * take the connector_list_lock. + */ +static DEFINE_MUTEX(connector_list_lock); +static LIST_HEAD(connector_list); + +struct drm_conn_prop_enum_list { + int type; + const char *name; + struct ida ida; +}; + +/* + * Connector and encoder types. + */ +static struct drm_conn_prop_enum_list drm_connector_enum_list[] = { + { DRM_MODE_CONNECTOR_Unknown, "Unknown" }, + { DRM_MODE_CONNECTOR_VGA, "VGA" }, + { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, + { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, + { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, + { DRM_MODE_CONNECTOR_Composite, "Composite" }, + { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" }, + { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, + { DRM_MODE_CONNECTOR_Component, "Component" }, + { DRM_MODE_CONNECTOR_9PinDIN, "DIN" }, + { DRM_MODE_CONNECTOR_DisplayPort, "DP" }, + { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" }, + { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" }, + { DRM_MODE_CONNECTOR_TV, "TV" }, + { DRM_MODE_CONNECTOR_eDP, "eDP" }, + { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" }, + { DRM_MODE_CONNECTOR_DSI, "DSI" }, + { DRM_MODE_CONNECTOR_DPI, "DPI" }, + { DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" }, + { DRM_MODE_CONNECTOR_SPI, "SPI" }, + { DRM_MODE_CONNECTOR_USB, "USB" }, +}; + +void drm_connector_ida_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++) + ida_init(&drm_connector_enum_list[i].ida); +} + +void drm_connector_ida_destroy(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++) + ida_destroy(&drm_connector_enum_list[i].ida); +} + +/** + * drm_get_connector_type_name - return a string for connector type + * @type: The connector type (DRM_MODE_CONNECTOR_*) + * + * Returns: the name of the connector type, or NULL if the type is not valid. + */ +const char *drm_get_connector_type_name(unsigned int type) +{ + if (type < ARRAY_SIZE(drm_connector_enum_list)) + return drm_connector_enum_list[type].name; + + return NULL; +} +EXPORT_SYMBOL(drm_get_connector_type_name); + +/** + * drm_connector_get_cmdline_mode - reads the user's cmdline mode + * @connector: connector to query + * + * The kernel supports per-connector configuration of its consoles through + * use of the video= parameter. This function parses that option and + * extracts the user's specified mode (or enable/disable status) for a + * particular connector. This is typically only used during the early fbdev + * setup. + */ +static void drm_connector_get_cmdline_mode(struct drm_connector *connector) +{ + struct drm_cmdline_mode *mode = &connector->cmdline_mode; + char *option = NULL; + + if (fb_get_options(connector->name, &option)) + return; + + if (!drm_mode_parse_command_line_for_connector(option, + connector, + mode)) + return; + + if (mode->force) { + DRM_INFO("forcing %s connector %s\n", connector->name, + drm_get_connector_force_name(mode->force)); + connector->force = mode->force; + } + + if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) { + DRM_INFO("cmdline forces connector %s panel_orientation to %d\n", + connector->name, mode->panel_orientation); + drm_connector_set_panel_orientation(connector, + mode->panel_orientation); + } + + DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n", + connector->name, mode->name, + mode->xres, mode->yres, + mode->refresh_specified ? mode->refresh : 60, + mode->rb ? " reduced blanking" : "", + mode->margins ? " with margins" : "", + mode->interlace ? " interlaced" : ""); +} + +static void drm_connector_free(struct kref *kref) +{ + struct drm_connector *connector = + container_of(kref, struct drm_connector, base.refcount); + struct drm_device *dev = connector->dev; + + drm_mode_object_unregister(dev, &connector->base); + connector->funcs->destroy(connector); +} + +void drm_connector_free_work_fn(struct work_struct *work) +{ + struct drm_connector *connector, *n; + struct drm_device *dev = + container_of(work, struct drm_device, mode_config.connector_free_work); + struct drm_mode_config *config = &dev->mode_config; + unsigned long flags; + struct llist_node *freed; + + spin_lock_irqsave(&config->connector_list_lock, flags); + freed = llist_del_all(&config->connector_free_list); + spin_unlock_irqrestore(&config->connector_list_lock, flags); + + llist_for_each_entry_safe(connector, n, freed, free_node) { + drm_mode_object_unregister(dev, &connector->base); + connector->funcs->destroy(connector); + } +} + +static int __drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type, + struct i2c_adapter *ddc) +{ + struct drm_mode_config *config = &dev->mode_config; + int ret; + struct ida *connector_ida = + &drm_connector_enum_list[connector_type].ida; + + WARN_ON(drm_drv_uses_atomic_modeset(dev) && + (!funcs->atomic_destroy_state || + !funcs->atomic_duplicate_state)); + + ret = __drm_mode_object_add(dev, &connector->base, + DRM_MODE_OBJECT_CONNECTOR, + false, drm_connector_free); + if (ret) + return ret; + + connector->base.properties = &connector->properties; + connector->dev = dev; + connector->funcs = funcs; + + /* connector index is used with 32bit bitmasks */ + ret = ida_alloc_max(&config->connector_ida, 31, GFP_KERNEL); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to allocate %s connector index: %d\n", + drm_connector_enum_list[connector_type].name, + ret); + goto out_put; + } + connector->index = ret; + ret = 0; + + connector->connector_type = connector_type; + connector->connector_type_id = + ida_alloc_min(connector_ida, 1, GFP_KERNEL); + if (connector->connector_type_id < 0) { + ret = connector->connector_type_id; + goto out_put_id; + } + connector->name = + kasprintf(GFP_KERNEL, "%s-%d", + drm_connector_enum_list[connector_type].name, + connector->connector_type_id); + if (!connector->name) { + ret = -ENOMEM; + goto out_put_type_id; + } + + /* provide ddc symlink in sysfs */ + connector->ddc = ddc; + + INIT_LIST_HEAD(&connector->global_connector_list_entry); + INIT_LIST_HEAD(&connector->probed_modes); + INIT_LIST_HEAD(&connector->modes); + mutex_init(&connector->mutex); + connector->edid_blob_ptr = NULL; + connector->epoch_counter = 0; + connector->tile_blob_ptr = NULL; + connector->status = connector_status_unknown; + connector->display_info.panel_orientation = + DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + + drm_connector_get_cmdline_mode(connector); + + /* We should add connectors at the end to avoid upsetting the connector + * index too much. + */ + spin_lock_irq(&config->connector_list_lock); + list_add_tail(&connector->head, &config->connector_list); + config->num_connector++; + spin_unlock_irq(&config->connector_list_lock); + + if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL && + connector_type != DRM_MODE_CONNECTOR_WRITEBACK) + drm_connector_attach_edid_property(connector); + + drm_object_attach_property(&connector->base, + config->dpms_property, 0); + + drm_object_attach_property(&connector->base, + config->link_status_property, + 0); + + drm_object_attach_property(&connector->base, + config->non_desktop_property, + 0); + drm_object_attach_property(&connector->base, + config->tile_property, + 0); + + if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { + drm_object_attach_property(&connector->base, config->prop_crtc_id, 0); + } + + connector->debugfs_entry = NULL; +out_put_type_id: + if (ret) + ida_free(connector_ida, connector->connector_type_id); +out_put_id: + if (ret) + ida_free(&config->connector_ida, connector->index); +out_put: + if (ret) + drm_mode_object_unregister(dev, &connector->base); + + return ret; +} + +/** + * drm_connector_init - Init a preallocated connector + * @dev: DRM device + * @connector: the connector to init + * @funcs: callbacks for this connector + * @connector_type: user visible type of the connector + * + * Initialises a preallocated connector. Connectors should be + * subclassed as part of driver connector objects. + * + * At driver unload time the driver's &drm_connector_funcs.destroy hook + * should call drm_connector_cleanup() and free the connector structure. + * The connector structure should not be allocated with devm_kzalloc(). + * + * Note: consider using drmm_connector_init() instead of + * drm_connector_init() to let the DRM managed resource infrastructure + * take care of cleanup and deallocation. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type) +{ + if (drm_WARN_ON(dev, !(funcs && funcs->destroy))) + return -EINVAL; + + return __drm_connector_init(dev, connector, funcs, connector_type, NULL); +} +EXPORT_SYMBOL(drm_connector_init); + +/** + * drm_connector_init_with_ddc - Init a preallocated connector + * @dev: DRM device + * @connector: the connector to init + * @funcs: callbacks for this connector + * @connector_type: user visible type of the connector + * @ddc: pointer to the associated ddc adapter + * + * Initialises a preallocated connector. Connectors should be + * subclassed as part of driver connector objects. + * + * At driver unload time the driver's &drm_connector_funcs.destroy hook + * should call drm_connector_cleanup() and free the connector structure. + * The connector structure should not be allocated with devm_kzalloc(). + * + * Ensures that the ddc field of the connector is correctly set. + * + * Note: consider using drmm_connector_init() instead of + * drm_connector_init_with_ddc() to let the DRM managed resource + * infrastructure take care of cleanup and deallocation. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_connector_init_with_ddc(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type, + struct i2c_adapter *ddc) +{ + if (drm_WARN_ON(dev, !(funcs && funcs->destroy))) + return -EINVAL; + + return __drm_connector_init(dev, connector, funcs, connector_type, ddc); +} +EXPORT_SYMBOL(drm_connector_init_with_ddc); + +static void drm_connector_cleanup_action(struct drm_device *dev, + void *ptr) +{ + struct drm_connector *connector = ptr; + + drm_connector_cleanup(connector); +} + +/** + * drmm_connector_init - Init a preallocated connector + * @dev: DRM device + * @connector: the connector to init + * @funcs: callbacks for this connector + * @connector_type: user visible type of the connector + * @ddc: optional pointer to the associated ddc adapter + * + * Initialises a preallocated connector. Connectors should be + * subclassed as part of driver connector objects. + * + * Cleanup is automatically handled with a call to + * drm_connector_cleanup() in a DRM-managed action. + * + * The connector structure should be allocated with drmm_kzalloc(). + * + * Returns: + * Zero on success, error code on failure. + */ +int drmm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type, + struct i2c_adapter *ddc) +{ + int ret; + + if (drm_WARN_ON(dev, funcs && funcs->destroy)) + return -EINVAL; + + ret = __drm_connector_init(dev, connector, funcs, connector_type, ddc); + if (ret) + return ret; + + ret = drmm_add_action_or_reset(dev, drm_connector_cleanup_action, + connector); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL(drmm_connector_init); + +/** + * drm_connector_attach_edid_property - attach edid property. + * @connector: the connector + * + * Some connector types like DRM_MODE_CONNECTOR_VIRTUAL do not get a + * edid property attached by default. This function can be used to + * explicitly enable the edid property in these cases. + */ +void drm_connector_attach_edid_property(struct drm_connector *connector) +{ + struct drm_mode_config *config = &connector->dev->mode_config; + + drm_object_attach_property(&connector->base, + config->edid_property, + 0); +} +EXPORT_SYMBOL(drm_connector_attach_edid_property); + +/** + * drm_connector_attach_encoder - attach a connector to an encoder + * @connector: connector to attach + * @encoder: encoder to attach @connector to + * + * This function links up a connector to an encoder. Note that the routing + * restrictions between encoders and crtcs are exposed to userspace through the + * possible_clones and possible_crtcs bitmasks. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder) +{ + /* + * In the past, drivers have attempted to model the static association + * of connector to encoder in simple connector/encoder devices using a + * direct assignment of connector->encoder = encoder. This connection + * is a logical one and the responsibility of the core, so drivers are + * expected not to mess with this. + * + * Note that the error return should've been enough here, but a large + * majority of drivers ignores the return value, so add in a big WARN + * to get people's attention. + */ + if (WARN_ON(connector->encoder)) + return -EINVAL; + + connector->possible_encoders |= drm_encoder_mask(encoder); + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_encoder); + +/** + * drm_connector_has_possible_encoder - check if the connector and encoder are + * associated with each other + * @connector: the connector + * @encoder: the encoder + * + * Returns: + * True if @encoder is one of the possible encoders for @connector. + */ +bool drm_connector_has_possible_encoder(struct drm_connector *connector, + struct drm_encoder *encoder) +{ + return connector->possible_encoders & drm_encoder_mask(encoder); +} +EXPORT_SYMBOL(drm_connector_has_possible_encoder); + +static void drm_mode_remove(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + list_del(&mode->head); + drm_mode_destroy(connector->dev, mode); +} + +/** + * drm_connector_cleanup - cleans up an initialised connector + * @connector: connector to cleanup + * + * Cleans up the connector but doesn't free the object. + */ +void drm_connector_cleanup(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_display_mode *mode, *t; + + /* The connector should have been removed from userspace long before + * it is finally destroyed. + */ + if (WARN_ON(connector->registration_state == + DRM_CONNECTOR_REGISTERED)) + drm_connector_unregister(connector); + + if (connector->privacy_screen) { + drm_privacy_screen_put(connector->privacy_screen); + connector->privacy_screen = NULL; + } + + if (connector->tile_group) { + drm_mode_put_tile_group(dev, connector->tile_group); + connector->tile_group = NULL; + } + + list_for_each_entry_safe(mode, t, &connector->probed_modes, head) + drm_mode_remove(connector, mode); + + list_for_each_entry_safe(mode, t, &connector->modes, head) + drm_mode_remove(connector, mode); + + ida_free(&drm_connector_enum_list[connector->connector_type].ida, + connector->connector_type_id); + + ida_free(&dev->mode_config.connector_ida, connector->index); + + kfree(connector->display_info.bus_formats); + drm_mode_object_unregister(dev, &connector->base); + kfree(connector->name); + connector->name = NULL; + fwnode_handle_put(connector->fwnode); + connector->fwnode = NULL; + spin_lock_irq(&dev->mode_config.connector_list_lock); + list_del(&connector->head); + dev->mode_config.num_connector--; + spin_unlock_irq(&dev->mode_config.connector_list_lock); + + WARN_ON(connector->state && !connector->funcs->atomic_destroy_state); + if (connector->state && connector->funcs->atomic_destroy_state) + connector->funcs->atomic_destroy_state(connector, + connector->state); + + mutex_destroy(&connector->mutex); + + memset(connector, 0, sizeof(*connector)); + + if (dev->registered) + drm_sysfs_hotplug_event(dev); +} +EXPORT_SYMBOL(drm_connector_cleanup); + +/** + * drm_connector_register - register a connector + * @connector: the connector to register + * + * Register userspace interfaces for a connector. Only call this for connectors + * which can be hotplugged after drm_dev_register() has been called already, + * e.g. DP MST connectors. All other connectors will be registered automatically + * when calling drm_dev_register(). + * + * When the connector is no longer available, callers must call + * drm_connector_unregister(). + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_connector_register(struct drm_connector *connector) +{ + int ret = 0; + + if (!connector->dev->registered) + return 0; + + mutex_lock(&connector->mutex); + if (connector->registration_state != DRM_CONNECTOR_INITIALIZING) + goto unlock; + + ret = drm_sysfs_connector_add(connector); + if (ret) + goto unlock; + + drm_debugfs_connector_add(connector); + + if (connector->funcs->late_register) { + ret = connector->funcs->late_register(connector); + if (ret) + goto err_debugfs; + } + + drm_mode_object_register(connector->dev, &connector->base); + + connector->registration_state = DRM_CONNECTOR_REGISTERED; + + /* Let userspace know we have a new connector */ + drm_sysfs_connector_hotplug_event(connector); + + if (connector->privacy_screen) + drm_privacy_screen_register_notifier(connector->privacy_screen, + &connector->privacy_screen_notifier); + + mutex_lock(&connector_list_lock); + list_add_tail(&connector->global_connector_list_entry, &connector_list); + mutex_unlock(&connector_list_lock); + goto unlock; + +err_debugfs: + drm_debugfs_connector_remove(connector); + drm_sysfs_connector_remove(connector); +unlock: + mutex_unlock(&connector->mutex); + return ret; +} +EXPORT_SYMBOL(drm_connector_register); + +/** + * drm_connector_unregister - unregister a connector + * @connector: the connector to unregister + * + * Unregister userspace interfaces for a connector. Only call this for + * connectors which have been registered explicitly by calling + * drm_connector_register(). + */ +void drm_connector_unregister(struct drm_connector *connector) +{ + mutex_lock(&connector->mutex); + if (connector->registration_state != DRM_CONNECTOR_REGISTERED) { + mutex_unlock(&connector->mutex); + return; + } + + mutex_lock(&connector_list_lock); + list_del_init(&connector->global_connector_list_entry); + mutex_unlock(&connector_list_lock); + + if (connector->privacy_screen) + drm_privacy_screen_unregister_notifier( + connector->privacy_screen, + &connector->privacy_screen_notifier); + + if (connector->funcs->early_unregister) + connector->funcs->early_unregister(connector); + + drm_sysfs_connector_remove(connector); + drm_debugfs_connector_remove(connector); + + connector->registration_state = DRM_CONNECTOR_UNREGISTERED; + mutex_unlock(&connector->mutex); +} +EXPORT_SYMBOL(drm_connector_unregister); + +void drm_connector_unregister_all(struct drm_device *dev) +{ + struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) + drm_connector_unregister(connector); + drm_connector_list_iter_end(&conn_iter); +} + +int drm_connector_register_all(struct drm_device *dev) +{ + struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; + int ret = 0; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + ret = drm_connector_register(connector); + if (ret) + break; + } + drm_connector_list_iter_end(&conn_iter); + + if (ret) + drm_connector_unregister_all(dev); + return ret; +} + +/** + * drm_get_connector_status_name - return a string for connector status + * @status: connector status to compute name of + * + * In contrast to the other drm_get_*_name functions this one here returns a + * const pointer and hence is threadsafe. + * + * Returns: connector status string + */ +const char *drm_get_connector_status_name(enum drm_connector_status status) +{ + if (status == connector_status_connected) + return "connected"; + else if (status == connector_status_disconnected) + return "disconnected"; + else + return "unknown"; +} +EXPORT_SYMBOL(drm_get_connector_status_name); + +/** + * drm_get_connector_force_name - return a string for connector force + * @force: connector force to get name of + * + * Returns: const pointer to name. + */ +const char *drm_get_connector_force_name(enum drm_connector_force force) +{ + switch (force) { + case DRM_FORCE_UNSPECIFIED: + return "unspecified"; + case DRM_FORCE_OFF: + return "off"; + case DRM_FORCE_ON: + return "on"; + case DRM_FORCE_ON_DIGITAL: + return "digital"; + default: + return "unknown"; + } +} + +#ifdef CONFIG_LOCKDEP +static struct lockdep_map connector_list_iter_dep_map = { + .name = "drm_connector_list_iter" +}; +#endif + +/** + * drm_connector_list_iter_begin - initialize a connector_list iterator + * @dev: DRM device + * @iter: connector_list iterator + * + * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter + * must always be cleaned up again by calling drm_connector_list_iter_end(). + * Iteration itself happens using drm_connector_list_iter_next() or + * drm_for_each_connector_iter(). + */ +void drm_connector_list_iter_begin(struct drm_device *dev, + struct drm_connector_list_iter *iter) +{ + iter->dev = dev; + iter->conn = NULL; + lock_acquire_shared_recursive(&connector_list_iter_dep_map, 0, 1, NULL, _RET_IP_); +} +EXPORT_SYMBOL(drm_connector_list_iter_begin); + +/* + * Extra-safe connector put function that works in any context. Should only be + * used from the connector_iter functions, where we never really expect to + * actually release the connector when dropping our final reference. + */ +static void +__drm_connector_put_safe(struct drm_connector *conn) +{ + struct drm_mode_config *config = &conn->dev->mode_config; + + lockdep_assert_held(&config->connector_list_lock); + + if (!refcount_dec_and_test(&conn->base.refcount.refcount)) + return; + + llist_add(&conn->free_node, &config->connector_free_list); + schedule_work(&config->connector_free_work); +} + +/** + * drm_connector_list_iter_next - return next connector + * @iter: connector_list iterator + * + * Returns: the next connector for @iter, or NULL when the list walk has + * completed. + */ +struct drm_connector * +drm_connector_list_iter_next(struct drm_connector_list_iter *iter) +{ + struct drm_connector *old_conn = iter->conn; + struct drm_mode_config *config = &iter->dev->mode_config; + struct list_head *lhead; + unsigned long flags; + + spin_lock_irqsave(&config->connector_list_lock, flags); + lhead = old_conn ? &old_conn->head : &config->connector_list; + + do { + if (lhead->next == &config->connector_list) { + iter->conn = NULL; + break; + } + + lhead = lhead->next; + iter->conn = list_entry(lhead, struct drm_connector, head); + + /* loop until it's not a zombie connector */ + } while (!kref_get_unless_zero(&iter->conn->base.refcount)); + + if (old_conn) + __drm_connector_put_safe(old_conn); + spin_unlock_irqrestore(&config->connector_list_lock, flags); + + return iter->conn; +} +EXPORT_SYMBOL(drm_connector_list_iter_next); + +/** + * drm_connector_list_iter_end - tear down a connector_list iterator + * @iter: connector_list iterator + * + * Tears down @iter and releases any resources (like &drm_connector references) + * acquired while walking the list. This must always be called, both when the + * iteration completes fully or when it was aborted without walking the entire + * list. + */ +void drm_connector_list_iter_end(struct drm_connector_list_iter *iter) +{ + struct drm_mode_config *config = &iter->dev->mode_config; + unsigned long flags; + + iter->dev = NULL; + if (iter->conn) { + spin_lock_irqsave(&config->connector_list_lock, flags); + __drm_connector_put_safe(iter->conn); + spin_unlock_irqrestore(&config->connector_list_lock, flags); + } + lock_release(&connector_list_iter_dep_map, _RET_IP_); +} +EXPORT_SYMBOL(drm_connector_list_iter_end); + +static const struct drm_prop_enum_list drm_subpixel_enum_list[] = { + { SubPixelUnknown, "Unknown" }, + { SubPixelHorizontalRGB, "Horizontal RGB" }, + { SubPixelHorizontalBGR, "Horizontal BGR" }, + { SubPixelVerticalRGB, "Vertical RGB" }, + { SubPixelVerticalBGR, "Vertical BGR" }, + { SubPixelNone, "None" }, +}; + +/** + * drm_get_subpixel_order_name - return a string for a given subpixel enum + * @order: enum of subpixel_order + * + * Note you could abuse this and return something out of bounds, but that + * would be a caller error. No unscrubbed user data should make it here. + * + * Returns: string describing an enumerated subpixel property + */ +const char *drm_get_subpixel_order_name(enum subpixel_order order) +{ + return drm_subpixel_enum_list[order].name; +} +EXPORT_SYMBOL(drm_get_subpixel_order_name); + +static const struct drm_prop_enum_list drm_dpms_enum_list[] = { + { DRM_MODE_DPMS_ON, "On" }, + { DRM_MODE_DPMS_STANDBY, "Standby" }, + { DRM_MODE_DPMS_SUSPEND, "Suspend" }, + { DRM_MODE_DPMS_OFF, "Off" } +}; +DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list) + +static const struct drm_prop_enum_list drm_link_status_enum_list[] = { + { DRM_MODE_LINK_STATUS_GOOD, "Good" }, + { DRM_MODE_LINK_STATUS_BAD, "Bad" }, +}; + +/** + * drm_display_info_set_bus_formats - set the supported bus formats + * @info: display info to store bus formats in + * @formats: array containing the supported bus formats + * @num_formats: the number of entries in the fmts array + * + * Store the supported bus formats in display info structure. + * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for + * a full list of available formats. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +int drm_display_info_set_bus_formats(struct drm_display_info *info, + const u32 *formats, + unsigned int num_formats) +{ + u32 *fmts = NULL; + + if (!formats && num_formats) + return -EINVAL; + + if (formats && num_formats) { + fmts = kmemdup(formats, sizeof(*formats) * num_formats, + GFP_KERNEL); + if (!fmts) + return -ENOMEM; + } + + kfree(info->bus_formats); + info->bus_formats = fmts; + info->num_bus_formats = num_formats; + + return 0; +} +EXPORT_SYMBOL(drm_display_info_set_bus_formats); + +/* Optional connector properties. */ +static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = { + { DRM_MODE_SCALE_NONE, "None" }, + { DRM_MODE_SCALE_FULLSCREEN, "Full" }, + { DRM_MODE_SCALE_CENTER, "Center" }, + { DRM_MODE_SCALE_ASPECT, "Full aspect" }, +}; + +static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { + { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" }, + { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" }, + { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, +}; + +static const struct drm_prop_enum_list drm_content_type_enum_list[] = { + { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, + { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, + { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, + { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, + { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, +}; + +static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = { + { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" }, + { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" }, + { DRM_MODE_PANEL_ORIENTATION_LEFT_UP, "Left Side Up" }, + { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, "Right Side Up" }, +}; + +static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = { + { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */ + { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */ + { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */ +}; +DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list) + +static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = { + { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */ + { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */ + { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */ +}; +DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name, + drm_dvi_i_subconnector_enum_list) + +static const struct drm_prop_enum_list drm_tv_select_enum_list[] = { + { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */ + { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */ + { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */ + { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */ + { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */ +}; +DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list) + +static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = { + { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */ + { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */ + { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */ + { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */ + { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */ +}; +DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name, + drm_tv_subconnector_enum_list) + +static const struct drm_prop_enum_list drm_dp_subconnector_enum_list[] = { + { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I, TV-out and DP */ + { DRM_MODE_SUBCONNECTOR_VGA, "VGA" }, /* DP */ + { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DP */ + { DRM_MODE_SUBCONNECTOR_HDMIA, "HDMI" }, /* DP */ + { DRM_MODE_SUBCONNECTOR_DisplayPort, "DP" }, /* DP */ + { DRM_MODE_SUBCONNECTOR_Wireless, "Wireless" }, /* DP */ + { DRM_MODE_SUBCONNECTOR_Native, "Native" }, /* DP */ +}; + +DRM_ENUM_NAME_FN(drm_get_dp_subconnector_name, + drm_dp_subconnector_enum_list) + +static const struct drm_prop_enum_list hdmi_colorspaces[] = { + /* For Default case, driver will set the colorspace */ + { DRM_MODE_COLORIMETRY_DEFAULT, "Default" }, + /* Standard Definition Colorimetry based on CEA 861 */ + { DRM_MODE_COLORIMETRY_SMPTE_170M_YCC, "SMPTE_170M_YCC" }, + { DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" }, + /* Standard Definition Colorimetry based on IEC 61966-2-4 */ + { DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" }, + /* High Definition Colorimetry based on IEC 61966-2-4 */ + { DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" }, + /* Colorimetry based on IEC 61966-2-1/Amendment 1 */ + { DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" }, + /* Colorimetry based on IEC 61966-2-5 [33] */ + { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" }, + /* Colorimetry based on IEC 61966-2-5 */ + { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" }, + /* Colorimetry based on ITU-R BT.2020 */ + { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" }, + /* Colorimetry based on ITU-R BT.2020 */ + { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" }, + /* Colorimetry based on ITU-R BT.2020 */ + { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" }, + /* Added as part of Additional Colorimetry Extension in 861.G */ + { DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" }, + { DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER, "DCI-P3_RGB_Theater" }, +}; + +/* + * As per DP 1.4a spec, 2.2.5.7.5 VSC SDP Payload for Pixel Encoding/Colorimetry + * Format Table 2-120 + */ +static const struct drm_prop_enum_list dp_colorspaces[] = { + /* For Default case, driver will set the colorspace */ + { DRM_MODE_COLORIMETRY_DEFAULT, "Default" }, + { DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED, "RGB_Wide_Gamut_Fixed_Point" }, + /* Colorimetry based on scRGB (IEC 61966-2-2) */ + { DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT, "RGB_Wide_Gamut_Floating_Point" }, + /* Colorimetry based on IEC 61966-2-5 */ + { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" }, + /* Colorimetry based on SMPTE RP 431-2 */ + { DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" }, + /* Colorimetry based on ITU-R BT.2020 */ + { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" }, + { DRM_MODE_COLORIMETRY_BT601_YCC, "BT601_YCC" }, + { DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" }, + /* Standard Definition Colorimetry based on IEC 61966-2-4 */ + { DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" }, + /* High Definition Colorimetry based on IEC 61966-2-4 */ + { DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" }, + /* Colorimetry based on IEC 61966-2-1/Amendment 1 */ + { DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" }, + /* Colorimetry based on IEC 61966-2-5 [33] */ + { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" }, + /* Colorimetry based on ITU-R BT.2020 */ + { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" }, + /* Colorimetry based on ITU-R BT.2020 */ + { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" }, +}; + +/** + * DOC: standard connector properties + * + * DRM connectors have a few standardized properties: + * + * EDID: + * Blob property which contains the current EDID read from the sink. This + * is useful to parse sink identification information like vendor, model + * and serial. Drivers should update this property by calling + * drm_connector_update_edid_property(), usually after having parsed + * the EDID using drm_add_edid_modes(). Userspace cannot change this + * property. + * + * User-space should not parse the EDID to obtain information exposed via + * other KMS properties (because the kernel might apply limits, quirks or + * fixups to the EDID). For instance, user-space should not try to parse + * mode lists from the EDID. + * DPMS: + * Legacy property for setting the power state of the connector. For atomic + * drivers this is only provided for backwards compatibility with existing + * drivers, it remaps to controlling the "ACTIVE" property on the CRTC the + * connector is linked to. Drivers should never set this property directly, + * it is handled by the DRM core by calling the &drm_connector_funcs.dpms + * callback. For atomic drivers the remapping to the "ACTIVE" property is + * implemented in the DRM core. + * + * Note that this property cannot be set through the MODE_ATOMIC ioctl, + * userspace must use "ACTIVE" on the CRTC instead. + * + * WARNING: + * + * For userspace also running on legacy drivers the "DPMS" semantics are a + * lot more complicated. First, userspace cannot rely on the "DPMS" value + * returned by the GETCONNECTOR actually reflecting reality, because many + * drivers fail to update it. For atomic drivers this is taken care of in + * drm_atomic_helper_update_legacy_modeset_state(). + * + * The second issue is that the DPMS state is only well-defined when the + * connector is connected to a CRTC. In atomic the DRM core enforces that + * "ACTIVE" is off in such a case, no such checks exists for "DPMS". + * + * Finally, when enabling an output using the legacy SETCONFIG ioctl then + * "DPMS" is forced to ON. But see above, that might not be reflected in + * the software value on legacy drivers. + * + * Summarizing: Only set "DPMS" when the connector is known to be enabled, + * assume that a successful SETCONFIG call also sets "DPMS" to on, and + * never read back the value of "DPMS" because it can be incorrect. + * PATH: + * Connector path property to identify how this sink is physically + * connected. Used by DP MST. This should be set by calling + * drm_connector_set_path_property(), in the case of DP MST with the + * path property the MST manager created. Userspace cannot change this + * property. + * TILE: + * Connector tile group property to indicate how a set of DRM connector + * compose together into one logical screen. This is used by both high-res + * external screens (often only using a single cable, but exposing multiple + * DP MST sinks), or high-res integrated panels (like dual-link DSI) which + * are not gen-locked. Note that for tiled panels which are genlocked, like + * dual-link LVDS or dual-link DSI, the driver should try to not expose the + * tiling and virtualise both &drm_crtc and &drm_plane if needed. Drivers + * should update this value using drm_connector_set_tile_property(). + * Userspace cannot change this property. + * link-status: + * Connector link-status property to indicate the status of link. The + * default value of link-status is "GOOD". If something fails during or + * after modeset, the kernel driver may set this to "BAD" and issue a + * hotplug uevent. Drivers should update this value using + * drm_connector_set_link_status_property(). + * + * When user-space receives the hotplug uevent and detects a "BAD" + * link-status, the sink doesn't receive pixels anymore (e.g. the screen + * becomes completely black). The list of available modes may have + * changed. User-space is expected to pick a new mode if the current one + * has disappeared and perform a new modeset with link-status set to + * "GOOD" to re-enable the connector. + * + * If multiple connectors share the same CRTC and one of them gets a "BAD" + * link-status, the other are unaffected (ie. the sinks still continue to + * receive pixels). + * + * When user-space performs an atomic commit on a connector with a "BAD" + * link-status without resetting the property to "GOOD", the sink may + * still not receive pixels. When user-space performs an atomic commit + * which resets the link-status property to "GOOD" without the + * ALLOW_MODESET flag set, it might fail because a modeset is required. + * + * User-space can only change link-status to "GOOD", changing it to "BAD" + * is a no-op. + * + * For backwards compatibility with non-atomic userspace the kernel + * tries to automatically set the link-status back to "GOOD" in the + * SETCRTC IOCTL. This might fail if the mode is no longer valid, similar + * to how it might fail if a different screen has been connected in the + * interim. + * non_desktop: + * Indicates the output should be ignored for purposes of displaying a + * standard desktop environment or console. This is most likely because + * the output device is not rectilinear. + * Content Protection: + * This property is used by userspace to request the kernel protect future + * content communicated over the link. When requested, kernel will apply + * the appropriate means of protection (most often HDCP), and use the + * property to tell userspace the protection is active. + * + * Drivers can set this up by calling + * drm_connector_attach_content_protection_property() on initialization. + * + * The value of this property can be one of the following: + * + * DRM_MODE_CONTENT_PROTECTION_UNDESIRED = 0 + * The link is not protected, content is transmitted in the clear. + * DRM_MODE_CONTENT_PROTECTION_DESIRED = 1 + * Userspace has requested content protection, but the link is not + * currently protected. When in this state, kernel should enable + * Content Protection as soon as possible. + * DRM_MODE_CONTENT_PROTECTION_ENABLED = 2 + * Userspace has requested content protection, and the link is + * protected. Only the driver can set the property to this value. + * If userspace attempts to set to ENABLED, kernel will return + * -EINVAL. + * + * A few guidelines: + * + * - DESIRED state should be preserved until userspace de-asserts it by + * setting the property to UNDESIRED. This means ENABLED should only + * transition to UNDESIRED when the user explicitly requests it. + * - If the state is DESIRED, kernel should attempt to re-authenticate the + * link whenever possible. This includes across disable/enable, dpms, + * hotplug, downstream device changes, link status failures, etc.. + * - Kernel sends uevent with the connector id and property id through + * @drm_hdcp_update_content_protection, upon below kernel triggered + * scenarios: + * + * - DESIRED -> ENABLED (authentication success) + * - ENABLED -> DESIRED (termination of authentication) + * - Please note no uevents for userspace triggered property state changes, + * which can't fail such as + * + * - DESIRED/ENABLED -> UNDESIRED + * - UNDESIRED -> DESIRED + * - Userspace is responsible for polling the property or listen to uevents + * to determine when the value transitions from ENABLED to DESIRED. + * This signifies the link is no longer protected and userspace should + * take appropriate action (whatever that might be). + * + * HDCP Content Type: + * This Enum property is used by the userspace to declare the content type + * of the display stream, to kernel. Here display stream stands for any + * display content that userspace intended to display through HDCP + * encryption. + * + * Content Type of a stream is decided by the owner of the stream, as + * "HDCP Type0" or "HDCP Type1". + * + * The value of the property can be one of the below: + * - "HDCP Type0": DRM_MODE_HDCP_CONTENT_TYPE0 = 0 + * - "HDCP Type1": DRM_MODE_HDCP_CONTENT_TYPE1 = 1 + * + * When kernel starts the HDCP authentication (see "Content Protection" + * for details), it uses the content type in "HDCP Content Type" + * for performing the HDCP authentication with the display sink. + * + * Please note in HDCP spec versions, a link can be authenticated with + * HDCP 2.2 for Content Type 0/Content Type 1. Where as a link can be + * authenticated with HDCP1.4 only for Content Type 0(though it is implicit + * in nature. As there is no reference for Content Type in HDCP1.4). + * + * HDCP2.2 authentication protocol itself takes the "Content Type" as a + * parameter, which is a input for the DP HDCP2.2 encryption algo. + * + * In case of Type 0 content protection request, kernel driver can choose + * either of HDCP spec versions 1.4 and 2.2. When HDCP2.2 is used for + * "HDCP Type 0", a HDCP 2.2 capable repeater in the downstream can send + * that content to a HDCP 1.4 authenticated HDCP sink (Type0 link). + * But if the content is classified as "HDCP Type 1", above mentioned + * HDCP 2.2 repeater wont send the content to the HDCP sink as it can't + * authenticate the HDCP1.4 capable sink for "HDCP Type 1". + * + * Please note userspace can be ignorant of the HDCP versions used by the + * kernel driver to achieve the "HDCP Content Type". + * + * At current scenario, classifying a content as Type 1 ensures that the + * content will be displayed only through the HDCP2.2 encrypted link. + * + * Note that the HDCP Content Type property is introduced at HDCP 2.2, and + * defaults to type 0. It is only exposed by drivers supporting HDCP 2.2 + * (hence supporting Type 0 and Type 1). Based on how next versions of + * HDCP specs are defined content Type could be used for higher versions + * too. + * + * If content type is changed when "Content Protection" is not UNDESIRED, + * then kernel will disable the HDCP and re-enable with new type in the + * same atomic commit. And when "Content Protection" is ENABLED, it means + * that link is HDCP authenticated and encrypted, for the transmission of + * the Type of stream mentioned at "HDCP Content Type". + * + * HDR_OUTPUT_METADATA: + * Connector property to enable userspace to send HDR Metadata to + * driver. This metadata is based on the composition and blending + * policies decided by user, taking into account the hardware and + * sink capabilities. The driver gets this metadata and creates a + * Dynamic Range and Mastering Infoframe (DRM) in case of HDMI, + * SDP packet (Non-audio INFOFRAME SDP v1.3) for DP. This is then + * sent to sink. This notifies the sink of the upcoming frame's Color + * Encoding and Luminance parameters. + * + * Userspace first need to detect the HDR capabilities of sink by + * reading and parsing the EDID. Details of HDR metadata for HDMI + * are added in CTA 861.G spec. For DP , its defined in VESA DP + * Standard v1.4. It needs to then get the metadata information + * of the video/game/app content which are encoded in HDR (basically + * using HDR transfer functions). With this information it needs to + * decide on a blending policy and compose the relevant + * layers/overlays into a common format. Once this blending is done, + * userspace will be aware of the metadata of the composed frame to + * be send to sink. It then uses this property to communicate this + * metadata to driver which then make a Infoframe packet and sends + * to sink based on the type of encoder connected. + * + * Userspace will be responsible to do Tone mapping operation in case: + * - Some layers are HDR and others are SDR + * - HDR layers luminance is not same as sink + * + * It will even need to do colorspace conversion and get all layers + * to one common colorspace for blending. It can use either GL, Media + * or display engine to get this done based on the capabilities of the + * associated hardware. + * + * Driver expects metadata to be put in &struct hdr_output_metadata + * structure from userspace. This is received as blob and stored in + * &drm_connector_state.hdr_output_metadata. It parses EDID and saves the + * sink metadata in &struct hdr_sink_metadata, as + * &drm_connector.hdr_sink_metadata. Driver uses + * drm_hdmi_infoframe_set_hdr_metadata() helper to set the HDR metadata, + * hdmi_drm_infoframe_pack() to pack the infoframe as per spec, in case of + * HDMI encoder. + * + * max bpc: + * This range property is used by userspace to limit the bit depth. When + * used the driver would limit the bpc in accordance with the valid range + * supported by the hardware and sink. Drivers to use the function + * drm_connector_attach_max_bpc_property() to create and attach the + * property to the connector during initialization. + * + * Connectors also have one standardized atomic property: + * + * CRTC_ID: + * Mode object ID of the &drm_crtc this connector should be connected to. + * + * Connectors for LCD panels may also have one standardized property: + * + * panel orientation: + * On some devices the LCD panel is mounted in the casing in such a way + * that the up/top side of the panel does not match with the top side of + * the device. Userspace can use this property to check for this. + * Note that input coordinates from touchscreens (input devices with + * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel + * coordinates, so if userspace rotates the picture to adjust for + * the orientation it must also apply the same transformation to the + * touchscreen input coordinates. This property is initialized by calling + * drm_connector_set_panel_orientation() or + * drm_connector_set_panel_orientation_with_quirk() + * + * scaling mode: + * This property defines how a non-native mode is upscaled to the native + * mode of an LCD panel: + * + * None: + * No upscaling happens, scaling is left to the panel. Not all + * drivers expose this mode. + * Full: + * The output is upscaled to the full resolution of the panel, + * ignoring the aspect ratio. + * Center: + * No upscaling happens, the output is centered within the native + * resolution the panel. + * Full aspect: + * The output is upscaled to maximize either the width or height + * while retaining the aspect ratio. + * + * This property should be set up by calling + * drm_connector_attach_scaling_mode_property(). Note that drivers + * can also expose this property to external outputs, in which case they + * must support "None", which should be the default (since external screens + * have a built-in scaler). + * + * subconnector: + * This property is used by DVI-I, TVout and DisplayPort to indicate different + * connector subtypes. Enum values more or less match with those from main + * connector types. + * For DVI-I and TVout there is also a matching property "select subconnector" + * allowing to switch between signal types. + * DP subconnector corresponds to a downstream port. + * + * privacy-screen sw-state, privacy-screen hw-state: + * These 2 optional properties can be used to query the state of the + * electronic privacy screen that is available on some displays; and in + * some cases also control the state. If a driver implements these + * properties then both properties must be present. + * + * "privacy-screen hw-state" is read-only and reflects the actual state + * of the privacy-screen, possible values: "Enabled", "Disabled, + * "Enabled-locked", "Disabled-locked". The locked states indicate + * that the state cannot be changed through the DRM API. E.g. there + * might be devices where the firmware-setup options, or a hardware + * slider-switch, offer always on / off modes. + * + * "privacy-screen sw-state" can be set to change the privacy-screen state + * when not locked. In this case the driver must update the hw-state + * property to reflect the new state on completion of the commit of the + * sw-state property. Setting the sw-state property when the hw-state is + * locked must be interpreted by the driver as a request to change the + * state to the set state when the hw-state becomes unlocked. E.g. if + * "privacy-screen hw-state" is "Enabled-locked" and the sw-state + * gets set to "Disabled" followed by the user unlocking the state by + * changing the slider-switch position, then the driver must set the + * state to "Disabled" upon receiving the unlock event. + * + * In some cases the privacy-screen's actual state might change outside of + * control of the DRM code. E.g. there might be a firmware handled hotkey + * which toggles the actual state, or the actual state might be changed + * through another userspace API such as writing /proc/acpi/ibm/lcdshadow. + * In this case the driver must update both the hw-state and the sw-state + * to reflect the new value, overwriting any pending state requests in the + * sw-state. Any pending sw-state requests are thus discarded. + * + * Note that the ability for the state to change outside of control of + * the DRM master process means that userspace must not cache the value + * of the sw-state. Caching the sw-state value and including it in later + * atomic commits may lead to overriding a state change done through e.g. + * a firmware handled hotkey. Therefor userspace must not include the + * privacy-screen sw-state in an atomic commit unless it wants to change + * its value. + */ + +int drm_connector_create_standard_properties(struct drm_device *dev) +{ + struct drm_property *prop; + + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB | + DRM_MODE_PROP_IMMUTABLE, + "EDID", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.edid_property = prop; + + prop = drm_property_create_enum(dev, 0, + "DPMS", drm_dpms_enum_list, + ARRAY_SIZE(drm_dpms_enum_list)); + if (!prop) + return -ENOMEM; + dev->mode_config.dpms_property = prop; + + prop = drm_property_create(dev, + DRM_MODE_PROP_BLOB | + DRM_MODE_PROP_IMMUTABLE, + "PATH", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.path_property = prop; + + prop = drm_property_create(dev, + DRM_MODE_PROP_BLOB | + DRM_MODE_PROP_IMMUTABLE, + "TILE", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.tile_property = prop; + + prop = drm_property_create_enum(dev, 0, "link-status", + drm_link_status_enum_list, + ARRAY_SIZE(drm_link_status_enum_list)); + if (!prop) + return -ENOMEM; + dev->mode_config.link_status_property = prop; + + prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, "non-desktop"); + if (!prop) + return -ENOMEM; + dev->mode_config.non_desktop_property = prop; + + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB, + "HDR_OUTPUT_METADATA", 0); + if (!prop) + return -ENOMEM; + dev->mode_config.hdr_output_metadata_property = prop; + + return 0; +} + +/** + * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties + * @dev: DRM device + * + * Called by a driver the first time a DVI-I connector is made. + * + * Returns: %0 + */ +int drm_mode_create_dvi_i_properties(struct drm_device *dev) +{ + struct drm_property *dvi_i_selector; + struct drm_property *dvi_i_subconnector; + + if (dev->mode_config.dvi_i_select_subconnector_property) + return 0; + + dvi_i_selector = + drm_property_create_enum(dev, 0, + "select subconnector", + drm_dvi_i_select_enum_list, + ARRAY_SIZE(drm_dvi_i_select_enum_list)); + dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector; + + dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, + "subconnector", + drm_dvi_i_subconnector_enum_list, + ARRAY_SIZE(drm_dvi_i_subconnector_enum_list)); + dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); + +/** + * drm_connector_attach_dp_subconnector_property - create subconnector property for DP + * @connector: drm_connector to attach property + * + * Called by a driver when DP connector is created. + */ +void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector) +{ + struct drm_mode_config *mode_config = &connector->dev->mode_config; + + if (!mode_config->dp_subconnector_property) + mode_config->dp_subconnector_property = + drm_property_create_enum(connector->dev, + DRM_MODE_PROP_IMMUTABLE, + "subconnector", + drm_dp_subconnector_enum_list, + ARRAY_SIZE(drm_dp_subconnector_enum_list)); + + drm_object_attach_property(&connector->base, + mode_config->dp_subconnector_property, + DRM_MODE_SUBCONNECTOR_Unknown); +} +EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property); + +/** + * DOC: HDMI connector properties + * + * content type (HDMI specific): + * Indicates content type setting to be used in HDMI infoframes to indicate + * content type for the external device, so that it adjusts its display + * settings accordingly. + * + * The value of this property can be one of the following: + * + * No Data: + * Content type is unknown + * Graphics: + * Content type is graphics + * Photo: + * Content type is photo + * Cinema: + * Content type is cinema + * Game: + * Content type is game + * + * The meaning of each content type is defined in CTA-861-G table 15. + * + * Drivers can set up this property by calling + * drm_connector_attach_content_type_property(). Decoding to + * infoframe values is done through drm_hdmi_avi_infoframe_content_type(). + */ + +/** + * drm_connector_attach_content_type_property - attach content-type property + * @connector: connector to attach content type property on. + * + * Called by a driver the first time a HDMI connector is made. + * + * Returns: %0 + */ +int drm_connector_attach_content_type_property(struct drm_connector *connector) +{ + if (!drm_mode_create_content_type_property(connector->dev)) + drm_object_attach_property(&connector->base, + connector->dev->mode_config.content_type_property, + DRM_MODE_CONTENT_TYPE_NO_DATA); + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_content_type_property); + +/** + * drm_connector_attach_tv_margin_properties - attach TV connector margin + * properties + * @connector: DRM connector + * + * Called by a driver when it needs to attach TV margin props to a connector. + * Typically used on SDTV and HDMI connectors. + */ +void drm_connector_attach_tv_margin_properties(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + + drm_object_attach_property(&connector->base, + dev->mode_config.tv_left_margin_property, + 0); + drm_object_attach_property(&connector->base, + dev->mode_config.tv_right_margin_property, + 0); + drm_object_attach_property(&connector->base, + dev->mode_config.tv_top_margin_property, + 0); + drm_object_attach_property(&connector->base, + dev->mode_config.tv_bottom_margin_property, + 0); +} +EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties); + +/** + * drm_mode_create_tv_margin_properties - create TV connector margin properties + * @dev: DRM device + * + * Called by a driver's HDMI connector initialization routine, this function + * creates the TV margin properties for a given device. No need to call this + * function for an SDTV connector, it's already called from + * drm_mode_create_tv_properties(). + * + * Returns: + * 0 on success or a negative error code on failure. + */ +int drm_mode_create_tv_margin_properties(struct drm_device *dev) +{ + if (dev->mode_config.tv_left_margin_property) + return 0; + + dev->mode_config.tv_left_margin_property = + drm_property_create_range(dev, 0, "left margin", 0, 100); + if (!dev->mode_config.tv_left_margin_property) + return -ENOMEM; + + dev->mode_config.tv_right_margin_property = + drm_property_create_range(dev, 0, "right margin", 0, 100); + if (!dev->mode_config.tv_right_margin_property) + return -ENOMEM; + + dev->mode_config.tv_top_margin_property = + drm_property_create_range(dev, 0, "top margin", 0, 100); + if (!dev->mode_config.tv_top_margin_property) + return -ENOMEM; + + dev->mode_config.tv_bottom_margin_property = + drm_property_create_range(dev, 0, "bottom margin", 0, 100); + if (!dev->mode_config.tv_bottom_margin_property) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_tv_margin_properties); + +/** + * drm_mode_create_tv_properties - create TV specific connector properties + * @dev: DRM device + * @num_modes: number of different TV formats (modes) supported + * @modes: array of pointers to strings containing name of each format + * + * Called by a driver's TV initialization routine, this function creates + * the TV specific connector properties for a given device. Caller is + * responsible for allocating a list of format names and passing them to + * this routine. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +int drm_mode_create_tv_properties(struct drm_device *dev, + unsigned int num_modes, + const char * const modes[]) +{ + struct drm_property *tv_selector; + struct drm_property *tv_subconnector; + unsigned int i; + + if (dev->mode_config.tv_select_subconnector_property) + return 0; + + /* + * Basic connector properties + */ + tv_selector = drm_property_create_enum(dev, 0, + "select subconnector", + drm_tv_select_enum_list, + ARRAY_SIZE(drm_tv_select_enum_list)); + if (!tv_selector) + goto nomem; + + dev->mode_config.tv_select_subconnector_property = tv_selector; + + tv_subconnector = + drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, + "subconnector", + drm_tv_subconnector_enum_list, + ARRAY_SIZE(drm_tv_subconnector_enum_list)); + if (!tv_subconnector) + goto nomem; + dev->mode_config.tv_subconnector_property = tv_subconnector; + + /* + * Other, TV specific properties: margins & TV modes. + */ + if (drm_mode_create_tv_margin_properties(dev)) + goto nomem; + + dev->mode_config.tv_mode_property = + drm_property_create(dev, DRM_MODE_PROP_ENUM, + "mode", num_modes); + if (!dev->mode_config.tv_mode_property) + goto nomem; + + for (i = 0; i < num_modes; i++) + drm_property_add_enum(dev->mode_config.tv_mode_property, + i, modes[i]); + + dev->mode_config.tv_brightness_property = + drm_property_create_range(dev, 0, "brightness", 0, 100); + if (!dev->mode_config.tv_brightness_property) + goto nomem; + + dev->mode_config.tv_contrast_property = + drm_property_create_range(dev, 0, "contrast", 0, 100); + if (!dev->mode_config.tv_contrast_property) + goto nomem; + + dev->mode_config.tv_flicker_reduction_property = + drm_property_create_range(dev, 0, "flicker reduction", 0, 100); + if (!dev->mode_config.tv_flicker_reduction_property) + goto nomem; + + dev->mode_config.tv_overscan_property = + drm_property_create_range(dev, 0, "overscan", 0, 100); + if (!dev->mode_config.tv_overscan_property) + goto nomem; + + dev->mode_config.tv_saturation_property = + drm_property_create_range(dev, 0, "saturation", 0, 100); + if (!dev->mode_config.tv_saturation_property) + goto nomem; + + dev->mode_config.tv_hue_property = + drm_property_create_range(dev, 0, "hue", 0, 100); + if (!dev->mode_config.tv_hue_property) + goto nomem; + + return 0; +nomem: + return -ENOMEM; +} +EXPORT_SYMBOL(drm_mode_create_tv_properties); + +/** + * drm_mode_create_scaling_mode_property - create scaling mode property + * @dev: DRM device + * + * Called by a driver the first time it's needed, must be attached to desired + * connectors. + * + * Atomic drivers should use drm_connector_attach_scaling_mode_property() + * instead to correctly assign &drm_connector_state.scaling_mode + * in the atomic state. + * + * Returns: %0 + */ +int drm_mode_create_scaling_mode_property(struct drm_device *dev) +{ + struct drm_property *scaling_mode; + + if (dev->mode_config.scaling_mode_property) + return 0; + + scaling_mode = + drm_property_create_enum(dev, 0, "scaling mode", + drm_scaling_mode_enum_list, + ARRAY_SIZE(drm_scaling_mode_enum_list)); + + dev->mode_config.scaling_mode_property = scaling_mode; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_scaling_mode_property); + +/** + * DOC: Variable refresh properties + * + * Variable refresh rate capable displays can dynamically adjust their + * refresh rate by extending the duration of their vertical front porch + * until page flip or timeout occurs. This can reduce or remove stuttering + * and latency in scenarios where the page flip does not align with the + * vblank interval. + * + * An example scenario would be an application flipping at a constant rate + * of 48Hz on a 60Hz display. The page flip will frequently miss the vblank + * interval and the same contents will be displayed twice. This can be + * observed as stuttering for content with motion. + * + * If variable refresh rate was active on a display that supported a + * variable refresh range from 35Hz to 60Hz no stuttering would be observable + * for the example scenario. The minimum supported variable refresh rate of + * 35Hz is below the page flip frequency and the vertical front porch can + * be extended until the page flip occurs. The vblank interval will be + * directly aligned to the page flip rate. + * + * Not all userspace content is suitable for use with variable refresh rate. + * Large and frequent changes in vertical front porch duration may worsen + * perceived stuttering for input sensitive applications. + * + * Panel brightness will also vary with vertical front porch duration. Some + * panels may have noticeable differences in brightness between the minimum + * vertical front porch duration and the maximum vertical front porch duration. + * Large and frequent changes in vertical front porch duration may produce + * observable flickering for such panels. + * + * Userspace control for variable refresh rate is supported via properties + * on the &drm_connector and &drm_crtc objects. + * + * "vrr_capable": + * Optional &drm_connector boolean property that drivers should attach + * with drm_connector_attach_vrr_capable_property() on connectors that + * could support variable refresh rates. Drivers should update the + * property value by calling drm_connector_set_vrr_capable_property(). + * + * Absence of the property should indicate absence of support. + * + * "VRR_ENABLED": + * Default &drm_crtc boolean property that notifies the driver that the + * content on the CRTC is suitable for variable refresh rate presentation. + * The driver will take this property as a hint to enable variable + * refresh rate support if the receiver supports it, ie. if the + * "vrr_capable" property is true on the &drm_connector object. The + * vertical front porch duration will be extended until page-flip or + * timeout when enabled. + * + * The minimum vertical front porch duration is defined as the vertical + * front porch duration for the current mode. + * + * The maximum vertical front porch duration is greater than or equal to + * the minimum vertical front porch duration. The duration is derived + * from the minimum supported variable refresh rate for the connector. + * + * The driver may place further restrictions within these minimum + * and maximum bounds. + */ + +/** + * drm_connector_attach_vrr_capable_property - creates the + * vrr_capable property + * @connector: connector to create the vrr_capable property on. + * + * This is used by atomic drivers to add support for querying + * variable refresh rate capability for a connector. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_vrr_capable_property( + struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_property *prop; + + if (!connector->vrr_capable_property) { + prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, + "vrr_capable"); + if (!prop) + return -ENOMEM; + + connector->vrr_capable_property = prop; + drm_object_attach_property(&connector->base, prop, 0); + } + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_vrr_capable_property); + +/** + * drm_connector_attach_scaling_mode_property - attach atomic scaling mode property + * @connector: connector to attach scaling mode property on. + * @scaling_mode_mask: or'ed mask of BIT(%DRM_MODE_SCALE_\*). + * + * This is used to add support for scaling mode to atomic drivers. + * The scaling mode will be set to &drm_connector_state.scaling_mode + * and can be used from &drm_connector_helper_funcs->atomic_check for validation. + * + * This is the atomic version of drm_mode_create_scaling_mode_property(). + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, + u32 scaling_mode_mask) +{ + struct drm_device *dev = connector->dev; + struct drm_property *scaling_mode_property; + int i; + const unsigned valid_scaling_mode_mask = + (1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1; + + if (WARN_ON(hweight32(scaling_mode_mask) < 2 || + scaling_mode_mask & ~valid_scaling_mode_mask)) + return -EINVAL; + + scaling_mode_property = + drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode", + hweight32(scaling_mode_mask)); + + if (!scaling_mode_property) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++) { + int ret; + + if (!(BIT(i) & scaling_mode_mask)) + continue; + + ret = drm_property_add_enum(scaling_mode_property, + drm_scaling_mode_enum_list[i].type, + drm_scaling_mode_enum_list[i].name); + + if (ret) { + drm_property_destroy(dev, scaling_mode_property); + + return ret; + } + } + + drm_object_attach_property(&connector->base, + scaling_mode_property, 0); + + connector->scaling_mode_property = scaling_mode_property; + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_scaling_mode_property); + +/** + * drm_mode_create_aspect_ratio_property - create aspect ratio property + * @dev: DRM device + * + * Called by a driver the first time it's needed, must be attached to desired + * connectors. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_create_aspect_ratio_property(struct drm_device *dev) +{ + if (dev->mode_config.aspect_ratio_property) + return 0; + + dev->mode_config.aspect_ratio_property = + drm_property_create_enum(dev, 0, "aspect ratio", + drm_aspect_ratio_enum_list, + ARRAY_SIZE(drm_aspect_ratio_enum_list)); + + if (dev->mode_config.aspect_ratio_property == NULL) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); + +/** + * DOC: standard connector properties + * + * Colorspace: + * This property helps select a suitable colorspace based on the sink + * capability. Modern sink devices support wider gamut like BT2020. + * This helps switch to BT2020 mode if the BT2020 encoded video stream + * is being played by the user, same for any other colorspace. Thereby + * giving a good visual experience to users. + * + * The expectation from userspace is that it should parse the EDID + * and get supported colorspaces. Use this property and switch to the + * one supported. Sink supported colorspaces should be retrieved by + * userspace from EDID and driver will not explicitly expose them. + * + * Basically the expectation from userspace is: + * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink + * colorspace + * - Set this new property to let the sink know what it + * converted the CRTC output to. + * - This property is just to inform sink what colorspace + * source is trying to drive. + * + * Because between HDMI and DP have different colorspaces, + * drm_mode_create_hdmi_colorspace_property() is used for HDMI connector and + * drm_mode_create_dp_colorspace_property() is used for DP connector. + */ + +/** + * drm_mode_create_hdmi_colorspace_property - create hdmi colorspace property + * @connector: connector to create the Colorspace property on. + * + * Called by a driver the first time it's needed, must be attached to desired + * HDMI connectors. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + + if (connector->colorspace_property) + return 0; + + connector->colorspace_property = + drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, "Colorspace", + hdmi_colorspaces, + ARRAY_SIZE(hdmi_colorspaces)); + + if (!connector->colorspace_property) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_hdmi_colorspace_property); + +/** + * drm_mode_create_dp_colorspace_property - create dp colorspace property + * @connector: connector to create the Colorspace property on. + * + * Called by a driver the first time it's needed, must be attached to desired + * DP connectors. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_create_dp_colorspace_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + + if (connector->colorspace_property) + return 0; + + connector->colorspace_property = + drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, "Colorspace", + dp_colorspaces, + ARRAY_SIZE(dp_colorspaces)); + + if (!connector->colorspace_property) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_dp_colorspace_property); + +/** + * drm_mode_create_content_type_property - create content type property + * @dev: DRM device + * + * Called by a driver the first time it's needed, must be attached to desired + * connectors. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_create_content_type_property(struct drm_device *dev) +{ + if (dev->mode_config.content_type_property) + return 0; + + dev->mode_config.content_type_property = + drm_property_create_enum(dev, 0, "content type", + drm_content_type_enum_list, + ARRAY_SIZE(drm_content_type_enum_list)); + + if (dev->mode_config.content_type_property == NULL) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_content_type_property); + +/** + * drm_mode_create_suggested_offset_properties - create suggests offset properties + * @dev: DRM device + * + * Create the suggested x/y offset property for connectors. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +int drm_mode_create_suggested_offset_properties(struct drm_device *dev) +{ + if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property) + return 0; + + dev->mode_config.suggested_x_property = + drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff); + + dev->mode_config.suggested_y_property = + drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff); + + if (dev->mode_config.suggested_x_property == NULL || + dev->mode_config.suggested_y_property == NULL) + return -ENOMEM; + return 0; +} +EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties); + +/** + * drm_connector_set_path_property - set tile property on connector + * @connector: connector to set property on. + * @path: path to use for property; must not be NULL. + * + * This creates a property to expose to userspace to specify a + * connector path. This is mainly used for DisplayPort MST where + * connectors have a topology and we want to allow userspace to give + * them more meaningful names. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_set_path_property(struct drm_connector *connector, + const char *path) +{ + struct drm_device *dev = connector->dev; + int ret; + + ret = drm_property_replace_global_blob(dev, + &connector->path_blob_ptr, + strlen(path) + 1, + path, + &connector->base, + dev->mode_config.path_property); + return ret; +} +EXPORT_SYMBOL(drm_connector_set_path_property); + +/** + * drm_connector_set_tile_property - set tile property on connector + * @connector: connector to set property on. + * + * This looks up the tile information for a connector, and creates a + * property for userspace to parse if it exists. The property is of + * the form of 8 integers using ':' as a separator. + * This is used for dual port tiled displays with DisplayPort SST + * or DisplayPort MST connectors. + * + * Returns: + * Zero on success, errno on failure. + */ +int drm_connector_set_tile_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + char tile[256]; + int ret; + + if (!connector->has_tile) { + ret = drm_property_replace_global_blob(dev, + &connector->tile_blob_ptr, + 0, + NULL, + &connector->base, + dev->mode_config.tile_property); + return ret; + } + + snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d", + connector->tile_group->id, connector->tile_is_single_monitor, + connector->num_h_tile, connector->num_v_tile, + connector->tile_h_loc, connector->tile_v_loc, + connector->tile_h_size, connector->tile_v_size); + + ret = drm_property_replace_global_blob(dev, + &connector->tile_blob_ptr, + strlen(tile) + 1, + tile, + &connector->base, + dev->mode_config.tile_property); + return ret; +} +EXPORT_SYMBOL(drm_connector_set_tile_property); + +/** + * drm_connector_set_link_status_property - Set link status property of a connector + * @connector: drm connector + * @link_status: new value of link status property (0: Good, 1: Bad) + * + * In usual working scenario, this link status property will always be set to + * "GOOD". If something fails during or after a mode set, the kernel driver + * may set this link status property to "BAD". The caller then needs to send a + * hotplug uevent for userspace to re-check the valid modes through + * GET_CONNECTOR_IOCTL and retry modeset. + * + * Note: Drivers cannot rely on userspace to support this property and + * issue a modeset. As such, they may choose to handle issues (like + * re-training a link) without userspace's intervention. + * + * The reason for adding this property is to handle link training failures, but + * it is not limited to DP or link training. For example, if we implement + * asynchronous setcrtc, this property can be used to report any failures in that. + */ +void drm_connector_set_link_status_property(struct drm_connector *connector, + uint64_t link_status) +{ + struct drm_device *dev = connector->dev; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + connector->state->link_status = link_status; + drm_modeset_unlock(&dev->mode_config.connection_mutex); +} +EXPORT_SYMBOL(drm_connector_set_link_status_property); + +/** + * drm_connector_attach_max_bpc_property - attach "max bpc" property + * @connector: connector to attach max bpc property on. + * @min: The minimum bit depth supported by the connector. + * @max: The maximum bit depth supported by the connector. + * + * This is used to add support for limiting the bit depth on a connector. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_max_bpc_property(struct drm_connector *connector, + int min, int max) +{ + struct drm_device *dev = connector->dev; + struct drm_property *prop; + + prop = connector->max_bpc_property; + if (!prop) { + prop = drm_property_create_range(dev, 0, "max bpc", min, max); + if (!prop) + return -ENOMEM; + + connector->max_bpc_property = prop; + } + + drm_object_attach_property(&connector->base, prop, max); + connector->state->max_requested_bpc = max; + connector->state->max_bpc = max; + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_max_bpc_property); + +/** + * drm_connector_attach_hdr_output_metadata_property - attach "HDR_OUTPUT_METADA" property + * @connector: connector to attach the property on. + * + * This is used to allow the userspace to send HDR Metadata to the + * driver. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_property *prop = dev->mode_config.hdr_output_metadata_property; + + drm_object_attach_property(&connector->base, prop, 0); + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_hdr_output_metadata_property); + +/** + * drm_connector_attach_colorspace_property - attach "Colorspace" property + * @connector: connector to attach the property on. + * + * This is used to allow the userspace to signal the output colorspace + * to the driver. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_colorspace_property(struct drm_connector *connector) +{ + struct drm_property *prop = connector->colorspace_property; + + drm_object_attach_property(&connector->base, prop, DRM_MODE_COLORIMETRY_DEFAULT); + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_colorspace_property); + +/** + * drm_connector_atomic_hdr_metadata_equal - checks if the hdr metadata changed + * @old_state: old connector state to compare + * @new_state: new connector state to compare + * + * This is used by HDR-enabled drivers to test whether the HDR metadata + * have changed between two different connector state (and thus probably + * requires a full blown mode change). + * + * Returns: + * True if the metadata are equal, False otherwise + */ +bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state, + struct drm_connector_state *new_state) +{ + struct drm_property_blob *old_blob = old_state->hdr_output_metadata; + struct drm_property_blob *new_blob = new_state->hdr_output_metadata; + + if (!old_blob || !new_blob) + return old_blob == new_blob; + + if (old_blob->length != new_blob->length) + return false; + + return !memcmp(old_blob->data, new_blob->data, old_blob->length); +} +EXPORT_SYMBOL(drm_connector_atomic_hdr_metadata_equal); + +/** + * drm_connector_set_vrr_capable_property - sets the variable refresh rate + * capable property for a connector + * @connector: drm connector + * @capable: True if the connector is variable refresh rate capable + * + * Should be used by atomic drivers to update the indicated support for + * variable refresh rate over a connector. + */ +void drm_connector_set_vrr_capable_property( + struct drm_connector *connector, bool capable) +{ + if (!connector->vrr_capable_property) + return; + + drm_object_property_set_value(&connector->base, + connector->vrr_capable_property, + capable); +} +EXPORT_SYMBOL(drm_connector_set_vrr_capable_property); + +/** + * drm_connector_set_panel_orientation - sets the connector's panel_orientation + * @connector: connector for which to set the panel-orientation property. + * @panel_orientation: drm_panel_orientation value to set + * + * This function sets the connector's panel_orientation and attaches + * a "panel orientation" property to the connector. + * + * Calling this function on a connector where the panel_orientation has + * already been set is a no-op (e.g. the orientation has been overridden with + * a kernel commandline option). + * + * It is allowed to call this function with a panel_orientation of + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op. + * + * The function shouldn't be called in panel after drm is registered (i.e. + * drm_dev_register() is called in drm). + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_set_panel_orientation( + struct drm_connector *connector, + enum drm_panel_orientation panel_orientation) +{ + struct drm_device *dev = connector->dev; + struct drm_display_info *info = &connector->display_info; + struct drm_property *prop; + + /* Already set? */ + if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) + return 0; + + /* Don't attach the property if the orientation is unknown */ + if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN) + return 0; + + info->panel_orientation = panel_orientation; + + prop = dev->mode_config.panel_orientation_property; + if (!prop) { + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, + "panel orientation", + drm_panel_orientation_enum_list, + ARRAY_SIZE(drm_panel_orientation_enum_list)); + if (!prop) + return -ENOMEM; + + dev->mode_config.panel_orientation_property = prop; + } + + drm_object_attach_property(&connector->base, prop, + info->panel_orientation); + return 0; +} +EXPORT_SYMBOL(drm_connector_set_panel_orientation); + +/** + * drm_connector_set_panel_orientation_with_quirk - set the + * connector's panel_orientation after checking for quirks + * @connector: connector for which to init the panel-orientation property. + * @panel_orientation: drm_panel_orientation value to set + * @width: width in pixels of the panel, used for panel quirk detection + * @height: height in pixels of the panel, used for panel quirk detection + * + * Like drm_connector_set_panel_orientation(), but with a check for platform + * specific (e.g. DMI based) quirks overriding the passed in panel_orientation. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_set_panel_orientation_with_quirk( + struct drm_connector *connector, + enum drm_panel_orientation panel_orientation, + int width, int height) +{ + int orientation_quirk; + + orientation_quirk = drm_get_panel_orientation_quirk(width, height); + if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) + panel_orientation = orientation_quirk; + + return drm_connector_set_panel_orientation(connector, + panel_orientation); +} +EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk); + +/** + * drm_connector_set_orientation_from_panel - + * set the connector's panel_orientation from panel's callback. + * @connector: connector for which to init the panel-orientation property. + * @panel: panel that can provide orientation information. + * + * Drm drivers should call this function before drm_dev_register(). + * Orientation is obtained from panel's .get_orientation() callback. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_set_orientation_from_panel( + struct drm_connector *connector, + struct drm_panel *panel) +{ + enum drm_panel_orientation orientation; + + if (panel && panel->funcs && panel->funcs->get_orientation) + orientation = panel->funcs->get_orientation(panel); + else + orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + + return drm_connector_set_panel_orientation(connector, orientation); +} +EXPORT_SYMBOL(drm_connector_set_orientation_from_panel); + +static const struct drm_prop_enum_list privacy_screen_enum[] = { + { PRIVACY_SCREEN_DISABLED, "Disabled" }, + { PRIVACY_SCREEN_ENABLED, "Enabled" }, + { PRIVACY_SCREEN_DISABLED_LOCKED, "Disabled-locked" }, + { PRIVACY_SCREEN_ENABLED_LOCKED, "Enabled-locked" }, +}; + +/** + * drm_connector_create_privacy_screen_properties - create the drm connecter's + * privacy-screen properties. + * @connector: connector for which to create the privacy-screen properties + * + * This function creates the "privacy-screen sw-state" and "privacy-screen + * hw-state" properties for the connector. They are not attached. + */ +void +drm_connector_create_privacy_screen_properties(struct drm_connector *connector) +{ + if (connector->privacy_screen_sw_state_property) + return; + + /* Note sw-state only supports the first 2 values of the enum */ + connector->privacy_screen_sw_state_property = + drm_property_create_enum(connector->dev, DRM_MODE_PROP_ENUM, + "privacy-screen sw-state", + privacy_screen_enum, 2); + + connector->privacy_screen_hw_state_property = + drm_property_create_enum(connector->dev, + DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_ENUM, + "privacy-screen hw-state", + privacy_screen_enum, + ARRAY_SIZE(privacy_screen_enum)); +} +EXPORT_SYMBOL(drm_connector_create_privacy_screen_properties); + +/** + * drm_connector_attach_privacy_screen_properties - attach the drm connecter's + * privacy-screen properties. + * @connector: connector on which to attach the privacy-screen properties + * + * This function attaches the "privacy-screen sw-state" and "privacy-screen + * hw-state" properties to the connector. The initial state of both is set + * to "Disabled". + */ +void +drm_connector_attach_privacy_screen_properties(struct drm_connector *connector) +{ + if (!connector->privacy_screen_sw_state_property) + return; + + drm_object_attach_property(&connector->base, + connector->privacy_screen_sw_state_property, + PRIVACY_SCREEN_DISABLED); + + drm_object_attach_property(&connector->base, + connector->privacy_screen_hw_state_property, + PRIVACY_SCREEN_DISABLED); +} +EXPORT_SYMBOL(drm_connector_attach_privacy_screen_properties); + +static void drm_connector_update_privacy_screen_properties( + struct drm_connector *connector, bool set_sw_state) +{ + enum drm_privacy_screen_status sw_state, hw_state; + + drm_privacy_screen_get_state(connector->privacy_screen, + &sw_state, &hw_state); + + if (set_sw_state) + connector->state->privacy_screen_sw_state = sw_state; + drm_object_property_set_value(&connector->base, + connector->privacy_screen_hw_state_property, hw_state); +} + +static int drm_connector_privacy_screen_notifier( + struct notifier_block *nb, unsigned long action, void *data) +{ + struct drm_connector *connector = + container_of(nb, struct drm_connector, privacy_screen_notifier); + struct drm_device *dev = connector->dev; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + drm_connector_update_privacy_screen_properties(connector, true); + drm_modeset_unlock(&dev->mode_config.connection_mutex); + + drm_sysfs_connector_status_event(connector, + connector->privacy_screen_sw_state_property); + drm_sysfs_connector_status_event(connector, + connector->privacy_screen_hw_state_property); + + return NOTIFY_DONE; +} + +/** + * drm_connector_attach_privacy_screen_provider - attach a privacy-screen to + * the connector + * @connector: connector to attach the privacy-screen to + * @priv: drm_privacy_screen to attach + * + * Create and attach the standard privacy-screen properties and register + * a generic notifier for generating sysfs-connector-status-events + * on external changes to the privacy-screen status. + * This function takes ownership of the passed in drm_privacy_screen and will + * call drm_privacy_screen_put() on it when the connector is destroyed. + */ +void drm_connector_attach_privacy_screen_provider( + struct drm_connector *connector, struct drm_privacy_screen *priv) +{ + connector->privacy_screen = priv; + connector->privacy_screen_notifier.notifier_call = + drm_connector_privacy_screen_notifier; + + drm_connector_create_privacy_screen_properties(connector); + drm_connector_update_privacy_screen_properties(connector, true); + drm_connector_attach_privacy_screen_properties(connector); +} +EXPORT_SYMBOL(drm_connector_attach_privacy_screen_provider); + +/** + * drm_connector_update_privacy_screen - update connector's privacy-screen sw-state + * @connector_state: connector-state to update the privacy-screen for + * + * This function calls drm_privacy_screen_set_sw_state() on the connector's + * privacy-screen. + * + * If the connector has no privacy-screen, then this is a no-op. + */ +void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state) +{ + struct drm_connector *connector = connector_state->connector; + int ret; + + if (!connector->privacy_screen) + return; + + ret = drm_privacy_screen_set_sw_state(connector->privacy_screen, + connector_state->privacy_screen_sw_state); + if (ret) { + drm_err(connector->dev, "Error updating privacy-screen sw_state\n"); + return; + } + + /* The hw_state property value may have changed, update it. */ + drm_connector_update_privacy_screen_properties(connector, false); +} +EXPORT_SYMBOL(drm_connector_update_privacy_screen); + +int drm_connector_set_obj_prop(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t value) +{ + int ret = -EINVAL; + struct drm_connector *connector = obj_to_connector(obj); + + /* Do DPMS ourselves */ + if (property == connector->dev->mode_config.dpms_property) { + ret = (*connector->funcs->dpms)(connector, (int)value); + } else if (connector->funcs->set_property) + ret = connector->funcs->set_property(connector, property, value); + + if (!ret) + drm_object_property_set_value(&connector->base, property, value); + return ret; +} + +int drm_connector_property_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_connector_set_property *conn_set_prop = data; + struct drm_mode_obj_set_property obj_set_prop = { + .value = conn_set_prop->value, + .prop_id = conn_set_prop->prop_id, + .obj_id = conn_set_prop->connector_id, + .obj_type = DRM_MODE_OBJECT_CONNECTOR + }; + + /* It does all the locking and checking we need */ + return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv); +} + +static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector) +{ + /* For atomic drivers only state objects are synchronously updated and + * protected by modeset locks, so check those first. + */ + if (connector->state) + return connector->state->best_encoder; + return connector->encoder; +} + +static bool +drm_mode_expose_to_userspace(const struct drm_display_mode *mode, + const struct list_head *modes, + const struct drm_file *file_priv) +{ + /* + * If user-space hasn't configured the driver to expose the stereo 3D + * modes, don't expose them. + */ + if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode)) + return false; + /* + * If user-space hasn't configured the driver to expose the modes + * with aspect-ratio, don't expose them. However if such a mode + * is unique, let it be exposed, but reset the aspect-ratio flags + * while preparing the list of user-modes. + */ + if (!file_priv->aspect_ratio_allowed) { + const struct drm_display_mode *mode_itr; + + list_for_each_entry(mode_itr, modes, head) { + if (mode_itr->expose_to_userspace && + drm_mode_match(mode_itr, mode, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS)) + return false; + } + } + + return true; +} + +int drm_mode_getconnector(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_get_connector *out_resp = data; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_display_mode *mode; + int mode_count = 0; + int encoders_count = 0; + int ret = 0; + int copied = 0; + struct drm_mode_modeinfo u_mode; + struct drm_mode_modeinfo __user *mode_ptr; + uint32_t __user *encoder_ptr; + bool is_current_master; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EOPNOTSUPP; + + memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo)); + + connector = drm_connector_lookup(dev, file_priv, out_resp->connector_id); + if (!connector) + return -ENOENT; + + encoders_count = hweight32(connector->possible_encoders); + + if ((out_resp->count_encoders >= encoders_count) && encoders_count) { + copied = 0; + encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr); + + drm_connector_for_each_possible_encoder(connector, encoder) { + if (put_user(encoder->base.id, encoder_ptr + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + out_resp->count_encoders = encoders_count; + + out_resp->connector_id = connector->base.id; + out_resp->connector_type = connector->connector_type; + out_resp->connector_type_id = connector->connector_type_id; + + is_current_master = drm_is_current_master(file_priv); + + mutex_lock(&dev->mode_config.mutex); + if (out_resp->count_modes == 0) { + if (is_current_master) + connector->funcs->fill_modes(connector, + dev->mode_config.max_width, + dev->mode_config.max_height); + else + drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe", + connector->base.id, connector->name); + } + + out_resp->mm_width = connector->display_info.width_mm; + out_resp->mm_height = connector->display_info.height_mm; + out_resp->subpixel = connector->display_info.subpixel_order; + out_resp->connection = connector->status; + + /* delayed so we get modes regardless of pre-fill_modes state */ + list_for_each_entry(mode, &connector->modes, head) { + WARN_ON(mode->expose_to_userspace); + + if (drm_mode_expose_to_userspace(mode, &connector->modes, + file_priv)) { + mode->expose_to_userspace = true; + mode_count++; + } + } + + /* + * This ioctl is called twice, once to determine how much space is + * needed, and the 2nd time to fill it. + */ + if ((out_resp->count_modes >= mode_count) && mode_count) { + copied = 0; + mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr; + list_for_each_entry(mode, &connector->modes, head) { + if (!mode->expose_to_userspace) + continue; + + /* Clear the tag for the next time around */ + mode->expose_to_userspace = false; + + drm_mode_convert_to_umode(&u_mode, mode); + /* + * Reset aspect ratio flags of user-mode, if modes with + * aspect-ratio are not supported. + */ + if (!file_priv->aspect_ratio_allowed) + u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; + if (copy_to_user(mode_ptr + copied, + &u_mode, sizeof(u_mode))) { + ret = -EFAULT; + + /* + * Clear the tag for the rest of + * the modes for the next time around. + */ + list_for_each_entry_continue(mode, &connector->modes, head) + mode->expose_to_userspace = false; + + mutex_unlock(&dev->mode_config.mutex); + + goto out; + } + copied++; + } + } else { + /* Clear the tag for the next time around */ + list_for_each_entry(mode, &connector->modes, head) + mode->expose_to_userspace = false; + } + + out_resp->count_modes = mode_count; + mutex_unlock(&dev->mode_config.mutex); + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + encoder = drm_connector_get_encoder(connector); + if (encoder) + out_resp->encoder_id = encoder->base.id; + else + out_resp->encoder_id = 0; + + /* Only grab properties after probing, to make sure EDID and other + * properties reflect the latest status. + */ + ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic, + (uint32_t __user *)(unsigned long)(out_resp->props_ptr), + (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr), + &out_resp->count_props); + drm_modeset_unlock(&dev->mode_config.connection_mutex); + +out: + drm_connector_put(connector); + + return ret; +} + +/** + * drm_connector_find_by_fwnode - Find a connector based on the associated fwnode + * @fwnode: fwnode for which to find the matching drm_connector + * + * This functions looks up a drm_connector based on its associated fwnode. When + * a connector is found a reference to the connector is returned. The caller must + * call drm_connector_put() to release this reference when it is done with the + * connector. + * + * Returns: A reference to the found connector or an ERR_PTR(). + */ +struct drm_connector *drm_connector_find_by_fwnode(struct fwnode_handle *fwnode) +{ + struct drm_connector *connector, *found = ERR_PTR(-ENODEV); + + if (!fwnode) + return ERR_PTR(-ENODEV); + + mutex_lock(&connector_list_lock); + + list_for_each_entry(connector, &connector_list, global_connector_list_entry) { + if (connector->fwnode == fwnode || + (connector->fwnode && connector->fwnode->secondary == fwnode)) { + drm_connector_get(connector); + found = connector; + break; + } + } + + mutex_unlock(&connector_list_lock); + + return found; +} + +/** + * drm_connector_oob_hotplug_event - Report out-of-band hotplug event to connector + * @connector_fwnode: fwnode_handle to report the event on + * + * On some hardware a hotplug event notification may come from outside the display + * driver / device. An example of this is some USB Type-C setups where the hardware + * muxes the DisplayPort data and aux-lines but does not pass the altmode HPD + * status bit to the GPU's DP HPD pin. + * + * This function can be used to report these out-of-band events after obtaining + * a drm_connector reference through calling drm_connector_find_by_fwnode(). + */ +void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode) +{ + struct drm_connector *connector; + + connector = drm_connector_find_by_fwnode(connector_fwnode); + if (IS_ERR(connector)) + return; + + if (connector->funcs->oob_hotplug_event) + connector->funcs->oob_hotplug_event(connector); + + drm_connector_put(connector); +} +EXPORT_SYMBOL(drm_connector_oob_hotplug_event); + + +/** + * DOC: Tile group + * + * Tile groups are used to represent tiled monitors with a unique integer + * identifier. Tiled monitors using DisplayID v1.3 have a unique 8-byte handle, + * we store this in a tile group, so we have a common identifier for all tiles + * in a monitor group. The property is called "TILE". Drivers can manage tile + * groups using drm_mode_create_tile_group(), drm_mode_put_tile_group() and + * drm_mode_get_tile_group(). But this is only needed for internal panels where + * the tile group information is exposed through a non-standard way. + */ + +static void drm_tile_group_free(struct kref *kref) +{ + struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount); + struct drm_device *dev = tg->dev; + + mutex_lock(&dev->mode_config.idr_mutex); + idr_remove(&dev->mode_config.tile_idr, tg->id); + mutex_unlock(&dev->mode_config.idr_mutex); + kfree(tg); +} + +/** + * drm_mode_put_tile_group - drop a reference to a tile group. + * @dev: DRM device + * @tg: tile group to drop reference to. + * + * drop reference to tile group and free if 0. + */ +void drm_mode_put_tile_group(struct drm_device *dev, + struct drm_tile_group *tg) +{ + kref_put(&tg->refcount, drm_tile_group_free); +} +EXPORT_SYMBOL(drm_mode_put_tile_group); + +/** + * drm_mode_get_tile_group - get a reference to an existing tile group + * @dev: DRM device + * @topology: 8-bytes unique per monitor. + * + * Use the unique bytes to get a reference to an existing tile group. + * + * RETURNS: + * tile group or NULL if not found. + */ +struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, + const char topology[8]) +{ + struct drm_tile_group *tg; + int id; + + mutex_lock(&dev->mode_config.idr_mutex); + idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) { + if (!memcmp(tg->group_data, topology, 8)) { + if (!kref_get_unless_zero(&tg->refcount)) + tg = NULL; + mutex_unlock(&dev->mode_config.idr_mutex); + return tg; + } + } + mutex_unlock(&dev->mode_config.idr_mutex); + return NULL; +} +EXPORT_SYMBOL(drm_mode_get_tile_group); + +/** + * drm_mode_create_tile_group - create a tile group from a displayid description + * @dev: DRM device + * @topology: 8-bytes unique per monitor. + * + * Create a tile group for the unique monitor, and get a unique + * identifier for the tile group. + * + * RETURNS: + * new tile group or NULL. + */ +struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, + const char topology[8]) +{ + struct drm_tile_group *tg; + int ret; + + tg = kzalloc(sizeof(*tg), GFP_KERNEL); + if (!tg) + return NULL; + + kref_init(&tg->refcount); + memcpy(tg->group_data, topology, 8); + tg->dev = dev; + + mutex_lock(&dev->mode_config.idr_mutex); + ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL); + if (ret >= 0) { + tg->id = ret; + } else { + kfree(tg); + tg = NULL; + } + + mutex_unlock(&dev->mode_config.idr_mutex); + return tg; +} +EXPORT_SYMBOL(drm_mode_create_tile_group); |