diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-elida-kd35t133.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-elida-kd35t133.c | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c new file mode 100644 index 000000000..3a7fc3ca6 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Elida kd35t133 5.5" MIPI-DSI panel driver + * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH + * + * based on + * + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver + * Copyright (C) Purism SPC 2019 + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +/* Manufacturer specific Commands send via DSI */ +#define KD35T133_CMD_INTERFACEMODECTRL 0xb0 +#define KD35T133_CMD_FRAMERATECTRL 0xb1 +#define KD35T133_CMD_DISPLAYINVERSIONCTRL 0xb4 +#define KD35T133_CMD_DISPLAYFUNCTIONCTRL 0xb6 +#define KD35T133_CMD_POWERCONTROL1 0xc0 +#define KD35T133_CMD_POWERCONTROL2 0xc1 +#define KD35T133_CMD_VCOMCONTROL 0xc5 +#define KD35T133_CMD_POSITIVEGAMMA 0xe0 +#define KD35T133_CMD_NEGATIVEGAMMA 0xe1 +#define KD35T133_CMD_SETIMAGEFUNCTION 0xe9 +#define KD35T133_CMD_ADJUSTCONTROL3 0xf7 + +struct kd35t133 { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator *vdd; + struct regulator *iovcc; + enum drm_panel_orientation orientation; + bool prepared; +}; + +static inline struct kd35t133 *panel_to_kd35t133(struct drm_panel *panel) +{ + return container_of(panel, struct kd35t133, panel); +} + +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 b[] = { cmd, seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static int kd35t133_init_sequence(struct kd35t133 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct device *dev = ctx->dev; + + /* + * Init sequence was supplied by the panel vendor with minimal + * documentation. + */ + dsi_dcs_write_seq(dsi, KD35T133_CMD_POSITIVEGAMMA, + 0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56, + 0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f); + dsi_dcs_write_seq(dsi, KD35T133_CMD_NEGATIVEGAMMA, + 0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34, + 0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f); + dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17); + dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL2, 0x41); + dsi_dcs_write_seq(dsi, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80); + dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x48); + dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); + dsi_dcs_write_seq(dsi, KD35T133_CMD_INTERFACEMODECTRL, 0x00); + dsi_dcs_write_seq(dsi, KD35T133_CMD_FRAMERATECTRL, 0xa0); + dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02); + dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYFUNCTIONCTRL, + 0x20, 0x02); + dsi_dcs_write_seq(dsi, KD35T133_CMD_SETIMAGEFUNCTION, 0x00); + dsi_dcs_write_seq(dsi, KD35T133_CMD_ADJUSTCONTROL3, + 0xa9, 0x51, 0x2c, 0x82); + mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0); + + dev_dbg(dev, "Panel init sequence done\n"); + return 0; +} + +static int kd35t133_unprepare(struct drm_panel *panel) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (!ctx->prepared) + return 0; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + dev_err(ctx->dev, "failed to set display off: %d\n", ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret); + return ret; + } + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vdd); + + ctx->prepared = false; + + return 0; +} + +static int kd35t133_prepare(struct drm_panel *panel) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (ctx->prepared) + return 0; + + dev_dbg(ctx->dev, "Resetting the panel\n"); + ret = regulator_enable(ctx->vdd); + if (ret < 0) { + dev_err(ctx->dev, "Failed to enable vdd supply: %d\n", ret); + return ret; + } + + ret = regulator_enable(ctx->iovcc); + if (ret < 0) { + dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret); + goto disable_vdd; + } + + msleep(20); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(10, 20); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + + msleep(20); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret); + goto disable_iovcc; + } + + msleep(250); + + ret = kd35t133_init_sequence(ctx); + if (ret < 0) { + dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret); + goto disable_iovcc; + } + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(ctx->dev, "Failed to set display on: %d\n", ret); + goto disable_iovcc; + } + + msleep(50); + + ctx->prepared = true; + + return 0; + +disable_iovcc: + regulator_disable(ctx->iovcc); +disable_vdd: + regulator_disable(ctx->vdd); + return ret; +} + +static const struct drm_display_mode default_mode = { + .hdisplay = 320, + .hsync_start = 320 + 130, + .hsync_end = 320 + 130 + 4, + .htotal = 320 + 130 + 4 + 130, + .vdisplay = 480, + .vsync_start = 480 + 2, + .vsync_end = 480 + 2 + 1, + .vtotal = 480 + 2 + 1 + 2, + .clock = 17000, + .width_mm = 42, + .height_mm = 82, +}; + +static int kd35t133_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + drm_mode_vrefresh(&default_mode)); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ + drm_connector_set_panel_orientation(connector, ctx->orientation); + + return 1; +} + +static enum drm_panel_orientation kd35t133_get_orientation(struct drm_panel *panel) +{ + struct kd35t133 *ctx = panel_to_kd35t133(panel); + + return ctx->orientation; +} + +static const struct drm_panel_funcs kd35t133_funcs = { + .unprepare = kd35t133_unprepare, + .prepare = kd35t133_prepare, + .get_modes = kd35t133_get_modes, + .get_orientation = kd35t133_get_orientation, +}; + +static int kd35t133_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct kd35t133 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + dev_err(dev, "cannot get reset gpio\n"); + return PTR_ERR(ctx->reset_gpio); + } + + ctx->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(ctx->vdd)) { + ret = PTR_ERR(ctx->vdd); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to request vdd regulator: %d\n", ret); + return ret; + } + + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + ret = PTR_ERR(ctx->iovcc); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to request iovcc regulator: %d\n", ret); + return ret; + } + + ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation); + if (ret < 0) { + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret); + return ret; + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 1; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + drm_panel_init(&ctx->panel, &dsi->dev, &kd35t133_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "mipi_dsi_attach failed: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void kd35t133_shutdown(struct mipi_dsi_device *dsi) +{ + struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = drm_panel_unprepare(&ctx->panel); + if (ret < 0) + dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret); + + ret = drm_panel_disable(&ctx->panel); + if (ret < 0) + dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret); +} + +static void kd35t133_remove(struct mipi_dsi_device *dsi) +{ + struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + kd35t133_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id kd35t133_of_match[] = { + { .compatible = "elida,kd35t133" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, kd35t133_of_match); + +static struct mipi_dsi_driver kd35t133_driver = { + .driver = { + .name = "panel-elida-kd35t133", + .of_match_table = kd35t133_of_match, + }, + .probe = kd35t133_probe, + .remove = kd35t133_remove, + .shutdown = kd35t133_shutdown, +}; +module_mipi_dsi_driver(kd35t133_driver); + +MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>"); +MODULE_DESCRIPTION("DRM driver for Elida kd35t133 MIPI DSI panel"); +MODULE_LICENSE("GPL v2"); |