summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/tve200/tve200_drv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/tve200/tve200_drv.c')
-rw-r--r--drivers/gpu/drm/tve200/tve200_drv.c274
1 files changed, 274 insertions, 0 deletions
diff --git a/drivers/gpu/drm/tve200/tve200_drv.c b/drivers/gpu/drm/tve200/tve200_drv.c
new file mode 100644
index 000000000..04db72e3f
--- /dev/null
+++ b/drivers/gpu/drm/tve200/tve200_drv.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ */
+
+/**
+ * DOC: Faraday TV Encoder TVE200 DRM Driver
+ *
+ * The Faraday TV Encoder TVE200 is also known as the Gemini TV Interface
+ * Controller (TVC) and is found in the Gemini Chipset from Storlink
+ * Semiconductor (later Storm Semiconductor, later Cortina Systems)
+ * but also in the Grain Media GM8180 chipset. On the Gemini the module
+ * is connected to 8 data lines and a single clock line, comprising an
+ * 8-bit BT.656 interface.
+ *
+ * This is a very basic YUV display driver. The datasheet specifies that
+ * it supports the ITU BT.656 standard. It requires a 27 MHz clock which is
+ * the hallmark of any TV encoder supporting both PAL and NTSC.
+ *
+ * This driver exposes a standard KMS interface for this TV encoder.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-buf.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/shmem_fs.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_module.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "tve200_drm.h"
+
+#define DRIVER_DESC "DRM module for Faraday TVE200"
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+ .fb_create = drm_gem_fb_create,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static int tve200_modeset_init(struct drm_device *dev)
+{
+ struct drm_mode_config *mode_config;
+ struct tve200_drm_dev_private *priv = dev->dev_private;
+ struct drm_panel *panel;
+ struct drm_bridge *bridge;
+ int ret;
+
+ drm_mode_config_init(dev);
+ mode_config = &dev->mode_config;
+ mode_config->funcs = &mode_config_funcs;
+ mode_config->min_width = 352;
+ mode_config->max_width = 720;
+ mode_config->min_height = 240;
+ mode_config->max_height = 576;
+
+ ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
+ 0, 0, &panel, &bridge);
+ if (ret && ret != -ENODEV)
+ return ret;
+ if (panel) {
+ bridge = drm_panel_bridge_add_typed(panel,
+ DRM_MODE_CONNECTOR_Unknown);
+ if (IS_ERR(bridge)) {
+ ret = PTR_ERR(bridge);
+ goto out_bridge;
+ }
+ } else {
+ /*
+ * TODO: when we are using a different bridge than a panel
+ * (such as a dumb VGA connector) we need to devise a different
+ * method to get the connector out of the bridge.
+ */
+ dev_err(dev->dev, "the bridge is not a panel\n");
+ ret = -EINVAL;
+ goto out_bridge;
+ }
+
+ ret = tve200_display_init(dev);
+ if (ret) {
+ dev_err(dev->dev, "failed to init display\n");
+ goto out_bridge;
+ }
+
+ ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
+ bridge);
+ if (ret) {
+ dev_err(dev->dev, "failed to attach bridge\n");
+ goto out_bridge;
+ }
+
+ priv->panel = panel;
+ priv->connector = drm_panel_bridge_connector(bridge);
+ priv->bridge = bridge;
+
+ dev_info(dev->dev, "attached to panel %s\n",
+ dev_name(panel->dev));
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ dev_err(dev->dev, "failed to init vblank\n");
+ goto out_bridge;
+ }
+
+ drm_mode_config_reset(dev);
+ drm_kms_helper_poll_init(dev);
+
+ goto finish;
+
+out_bridge:
+ if (panel)
+ drm_panel_bridge_remove(bridge);
+ drm_mode_config_cleanup(dev);
+finish:
+ return ret;
+}
+
+DEFINE_DRM_GEM_DMA_FOPS(drm_fops);
+
+static const struct drm_driver tve200_drm_driver = {
+ .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
+ .ioctls = NULL,
+ .fops = &drm_fops,
+ .name = "tve200",
+ .desc = DRIVER_DESC,
+ .date = "20170703",
+ .major = 1,
+ .minor = 0,
+ .patchlevel = 0,
+ DRM_GEM_DMA_DRIVER_OPS,
+};
+
+static int tve200_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tve200_drm_dev_private *priv;
+ struct drm_device *drm;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ drm = drm_dev_alloc(&tve200_drm_driver, dev);
+ if (IS_ERR(drm))
+ return PTR_ERR(drm);
+ platform_set_drvdata(pdev, drm);
+ priv->drm = drm;
+ drm->dev_private = priv;
+
+ /* Clock the silicon so we can access the registers */
+ priv->pclk = devm_clk_get(dev, "PCLK");
+ if (IS_ERR(priv->pclk)) {
+ dev_err(dev, "unable to get PCLK\n");
+ ret = PTR_ERR(priv->pclk);
+ goto dev_unref;
+ }
+ ret = clk_prepare_enable(priv->pclk);
+ if (ret) {
+ dev_err(dev, "failed to enable PCLK\n");
+ goto dev_unref;
+ }
+
+ /* This clock is for the pixels (27MHz) */
+ priv->clk = devm_clk_get(dev, "TVE");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "unable to get TVE clock\n");
+ ret = PTR_ERR(priv->clk);
+ goto clk_disable;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->regs)) {
+ dev_err(dev, "%s failed mmio\n", __func__);
+ ret = -EINVAL;
+ goto clk_disable;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto clk_disable;
+ }
+
+ /* turn off interrupts before requesting the irq */
+ writel(0, priv->regs + TVE200_INT_EN);
+
+ ret = devm_request_irq(dev, irq, tve200_irq, 0, "tve200", priv);
+ if (ret) {
+ dev_err(dev, "failed to request irq %d\n", ret);
+ goto clk_disable;
+ }
+
+ ret = tve200_modeset_init(drm);
+ if (ret)
+ goto clk_disable;
+
+ ret = drm_dev_register(drm, 0);
+ if (ret < 0)
+ goto clk_disable;
+
+ /*
+ * Passing in 16 here will make the RGB565 mode the default
+ * Passing in 32 will use XRGB8888 mode
+ */
+ drm_fbdev_generic_setup(drm, 16);
+
+ return 0;
+
+clk_disable:
+ clk_disable_unprepare(priv->pclk);
+dev_unref:
+ drm_dev_put(drm);
+ return ret;
+}
+
+static int tve200_remove(struct platform_device *pdev)
+{
+ struct drm_device *drm = platform_get_drvdata(pdev);
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+
+ drm_dev_unregister(drm);
+ if (priv->panel)
+ drm_panel_bridge_remove(priv->bridge);
+ drm_mode_config_cleanup(drm);
+ clk_disable_unprepare(priv->pclk);
+ drm_dev_put(drm);
+
+ return 0;
+}
+
+static const struct of_device_id tve200_of_match[] = {
+ {
+ .compatible = "faraday,tve200",
+ },
+ {},
+};
+
+static struct platform_driver tve200_driver = {
+ .driver = {
+ .name = "tve200",
+ .of_match_table = of_match_ptr(tve200_of_match),
+ },
+ .probe = tve200_probe,
+ .remove = tve200_remove,
+};
+drm_module_platform_driver(tve200_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");