summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-synquacer.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/i2c/busses/i2c-synquacer.c659
1 files changed, 659 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
new file mode 100644
index 000000000..e4026c541
--- /dev/null
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -0,0 +1,659 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 FUJITSU SEMICONDUCTOR LIMITED
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define WAIT_PCLK(n, rate) \
+ ndelay(DIV_ROUND_UP(DIV_ROUND_UP(1000000000, rate), n) + 10)
+
+/* I2C register address definitions */
+#define SYNQUACER_I2C_REG_BSR (0x00 << 2) // Bus Status
+#define SYNQUACER_I2C_REG_BCR (0x01 << 2) // Bus Control
+#define SYNQUACER_I2C_REG_CCR (0x02 << 2) // Clock Control
+#define SYNQUACER_I2C_REG_ADR (0x03 << 2) // Address
+#define SYNQUACER_I2C_REG_DAR (0x04 << 2) // Data
+#define SYNQUACER_I2C_REG_CSR (0x05 << 2) // Expansion CS
+#define SYNQUACER_I2C_REG_FSR (0x06 << 2) // Bus Clock Freq
+#define SYNQUACER_I2C_REG_BC2R (0x07 << 2) // Bus Control 2
+
+/* I2C register bit definitions */
+#define SYNQUACER_I2C_BSR_FBT BIT(0) // First Byte Transfer
+#define SYNQUACER_I2C_BSR_GCA BIT(1) // General Call Address
+#define SYNQUACER_I2C_BSR_AAS BIT(2) // Address as Slave
+#define SYNQUACER_I2C_BSR_TRX BIT(3) // Transfer/Receive
+#define SYNQUACER_I2C_BSR_LRB BIT(4) // Last Received Bit
+#define SYNQUACER_I2C_BSR_AL BIT(5) // Arbitration Lost
+#define SYNQUACER_I2C_BSR_RSC BIT(6) // Repeated Start Cond.
+#define SYNQUACER_I2C_BSR_BB BIT(7) // Bus Busy
+
+#define SYNQUACER_I2C_BCR_INT BIT(0) // Interrupt
+#define SYNQUACER_I2C_BCR_INTE BIT(1) // Interrupt Enable
+#define SYNQUACER_I2C_BCR_GCAA BIT(2) // Gen. Call Access Ack.
+#define SYNQUACER_I2C_BCR_ACK BIT(3) // Acknowledge
+#define SYNQUACER_I2C_BCR_MSS BIT(4) // Master Slave Select
+#define SYNQUACER_I2C_BCR_SCC BIT(5) // Start Condition Cont.
+#define SYNQUACER_I2C_BCR_BEIE BIT(6) // Bus Error Int Enable
+#define SYNQUACER_I2C_BCR_BER BIT(7) // Bus Error
+
+#define SYNQUACER_I2C_CCR_CS_MASK (0x1f) // CCR Clock Period Sel.
+#define SYNQUACER_I2C_CCR_EN BIT(5) // Enable
+#define SYNQUACER_I2C_CCR_FM BIT(6) // Speed Mode Select
+
+#define SYNQUACER_I2C_CSR_CS_MASK (0x3f) // CSR Clock Period Sel.
+
+#define SYNQUACER_I2C_BC2R_SCLL BIT(0) // SCL Low Drive
+#define SYNQUACER_I2C_BC2R_SDAL BIT(1) // SDA Low Drive
+#define SYNQUACER_I2C_BC2R_SCLS BIT(4) // SCL Status
+#define SYNQUACER_I2C_BC2R_SDAS BIT(5) // SDA Status
+
+/* PCLK frequency */
+#define SYNQUACER_I2C_BUS_CLK_FR(rate) (((rate) / 20000000) + 1)
+
+/* STANDARD MODE frequency */
+#define SYNQUACER_I2C_CLK_MASTER_STD(rate) \
+ DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2)
+/* FAST MODE frequency */
+#define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \
+ DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3)
+
+/* (clkrate <= 18000000) */
+/* calculate the value of CS bits in CCR register on standard mode */
+#define SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rate) \
+ ((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 65) \
+ & SYNQUACER_I2C_CCR_CS_MASK)
+
+/* calculate the value of CS bits in CSR register on standard mode */
+#define SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rate) 0x00
+
+/* calculate the value of CS bits in CCR register on fast mode */
+#define SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rate) \
+ ((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \
+ & SYNQUACER_I2C_CCR_CS_MASK)
+
+/* calculate the value of CS bits in CSR register on fast mode */
+#define SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rate) 0x00
+
+/* (clkrate > 18000000) */
+/* calculate the value of CS bits in CCR register on standard mode */
+#define SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rate) \
+ ((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) \
+ & SYNQUACER_I2C_CCR_CS_MASK)
+
+/* calculate the value of CS bits in CSR register on standard mode */
+#define SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rate) \
+ (((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) >> 5) \
+ & SYNQUACER_I2C_CSR_CS_MASK)
+
+/* calculate the value of CS bits in CCR register on fast mode */
+#define SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rate) \
+ ((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \
+ & SYNQUACER_I2C_CCR_CS_MASK)
+
+/* calculate the value of CS bits in CSR register on fast mode */
+#define SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rate) \
+ (((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) >> 5) \
+ & SYNQUACER_I2C_CSR_CS_MASK)
+
+/* min I2C clock frequency 14M */
+#define SYNQUACER_I2C_MIN_CLK_RATE (14 * 1000000)
+/* max I2C clock frequency 200M */
+#define SYNQUACER_I2C_MAX_CLK_RATE (200 * 1000000)
+/* I2C clock frequency 18M */
+#define SYNQUACER_I2C_CLK_RATE_18M (18 * 1000000)
+
+#define SYNQUACER_I2C_SPEED_FM 400 // Fast Mode
+#define SYNQUACER_I2C_SPEED_SM 100 // Standard Mode
+
+enum i2c_state {
+ STATE_IDLE,
+ STATE_START,
+ STATE_READ,
+ STATE_WRITE
+};
+
+struct synquacer_i2c {
+ struct completion completion;
+
+ struct i2c_msg *msg;
+ u32 msg_num;
+ u32 msg_idx;
+ u32 msg_ptr;
+
+ int irq;
+ struct device *dev;
+ void __iomem *base;
+ struct clk *pclk;
+ u32 pclkrate;
+ u32 speed_khz;
+ u32 timeout_ms;
+ enum i2c_state state;
+ struct i2c_adapter adapter;
+};
+
+static inline int is_lastmsg(struct synquacer_i2c *i2c)
+{
+ return i2c->msg_idx >= (i2c->msg_num - 1);
+}
+
+static inline int is_msglast(struct synquacer_i2c *i2c)
+{
+ return i2c->msg_ptr == (i2c->msg->len - 1);
+}
+
+static inline int is_msgend(struct synquacer_i2c *i2c)
+{
+ return i2c->msg_ptr >= i2c->msg->len;
+}
+
+static inline unsigned long calc_timeout_ms(struct synquacer_i2c *i2c,
+ struct i2c_msg *msgs,
+ int num)
+{
+ unsigned long bit_count = 0;
+ int i;
+
+ for (i = 0; i < num; i++, msgs++)
+ bit_count += msgs->len;
+
+ return DIV_ROUND_UP((bit_count * 9 + num * 10) * 3, 200) + 10;
+}
+
+static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret)
+{
+ /*
+ * clear IRQ (INT=0, BER=0)
+ * set Stop Condition (MSS=0)
+ * Interrupt Disable
+ */
+ writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
+
+ i2c->state = STATE_IDLE;
+
+ i2c->msg_ptr = 0;
+ i2c->msg = NULL;
+ i2c->msg_idx++;
+ i2c->msg_num = 0;
+ if (ret)
+ i2c->msg_idx = ret;
+
+ complete(&i2c->completion);
+}
+
+static void synquacer_i2c_hw_init(struct synquacer_i2c *i2c)
+{
+ unsigned char ccr_cs, csr_cs;
+ u32 rt = i2c->pclkrate;
+
+ /* Set own Address */
+ writeb(0, i2c->base + SYNQUACER_I2C_REG_ADR);
+
+ /* Set PCLK frequency */
+ writeb(SYNQUACER_I2C_BUS_CLK_FR(i2c->pclkrate),
+ i2c->base + SYNQUACER_I2C_REG_FSR);
+
+ switch (i2c->speed_khz) {
+ case SYNQUACER_I2C_SPEED_FM:
+ if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) {
+ ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rt);
+ csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rt);
+ } else {
+ ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rt);
+ csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rt);
+ }
+
+ /* Set Clock and enable, Set fast mode */
+ writeb(ccr_cs | SYNQUACER_I2C_CCR_FM |
+ SYNQUACER_I2C_CCR_EN,
+ i2c->base + SYNQUACER_I2C_REG_CCR);
+ writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR);
+ break;
+ case SYNQUACER_I2C_SPEED_SM:
+ if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) {
+ ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rt);
+ csr_cs = SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rt);
+ } else {
+ ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rt);
+ csr_cs = SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rt);
+ }
+
+ /* Set Clock and enable, Set standard mode */
+ writeb(ccr_cs | SYNQUACER_I2C_CCR_EN,
+ i2c->base + SYNQUACER_I2C_REG_CCR);
+ writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR);
+ break;
+ default:
+ WARN_ON(1);
+ }
+
+ /* clear IRQ (INT=0, BER=0), Interrupt Disable */
+ writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
+ writeb(0, i2c->base + SYNQUACER_I2C_REG_BC2R);
+}
+
+static void synquacer_i2c_hw_reset(struct synquacer_i2c *i2c)
+{
+ /* Disable clock */
+ writeb(0, i2c->base + SYNQUACER_I2C_REG_CCR);
+ writeb(0, i2c->base + SYNQUACER_I2C_REG_CSR);
+
+ WAIT_PCLK(100, i2c->pclkrate);
+}
+
+static int synquacer_i2c_master_start(struct synquacer_i2c *i2c,
+ struct i2c_msg *pmsg)
+{
+ unsigned char bsr, bcr;
+
+ writeb(i2c_8bit_addr_from_msg(pmsg), i2c->base + SYNQUACER_I2C_REG_DAR);
+
+ dev_dbg(i2c->dev, "slave:0x%02x\n", pmsg->addr);
+
+ /* Generate Start Condition */
+ bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
+ bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
+ dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
+
+ if ((bsr & SYNQUACER_I2C_BSR_BB) &&
+ !(bcr & SYNQUACER_I2C_BCR_MSS)) {
+ dev_dbg(i2c->dev, "bus is busy");
+ return -EBUSY;
+ }
+
+ if (bsr & SYNQUACER_I2C_BSR_BB) { /* Bus is busy */
+ dev_dbg(i2c->dev, "Continuous Start");
+ writeb(bcr | SYNQUACER_I2C_BCR_SCC,
+ i2c->base + SYNQUACER_I2C_REG_BCR);
+ } else {
+ if (bcr & SYNQUACER_I2C_BCR_MSS) {
+ dev_dbg(i2c->dev, "not in master mode");
+ return -EAGAIN;
+ }
+ dev_dbg(i2c->dev, "Start Condition");
+ /* Start Condition + Enable Interrupts */
+ writeb(bcr | SYNQUACER_I2C_BCR_MSS |
+ SYNQUACER_I2C_BCR_INTE | SYNQUACER_I2C_BCR_BEIE,
+ i2c->base + SYNQUACER_I2C_REG_BCR);
+ }
+
+ WAIT_PCLK(10, i2c->pclkrate);
+
+ /* get BSR & BCR registers */
+ bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
+ bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
+ dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
+
+ if ((bsr & SYNQUACER_I2C_BSR_AL) ||
+ !(bcr & SYNQUACER_I2C_BCR_MSS)) {
+ dev_dbg(i2c->dev, "arbitration lost\n");
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c,
+ struct i2c_msg *msgs, int num)
+{
+ unsigned char bsr;
+ unsigned long timeout;
+ int ret;
+
+ synquacer_i2c_hw_init(i2c);
+ bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
+ if (bsr & SYNQUACER_I2C_BSR_BB) {
+ dev_err(i2c->dev, "cannot get bus (bus busy)\n");
+ return -EBUSY;
+ }
+
+ reinit_completion(&i2c->completion);
+
+ i2c->msg = msgs;
+ i2c->msg_num = num;
+ i2c->msg_ptr = 0;
+ i2c->msg_idx = 0;
+ i2c->state = STATE_START;
+
+ ret = synquacer_i2c_master_start(i2c, i2c->msg);
+ if (ret < 0) {
+ dev_dbg(i2c->dev, "Address failed: (%d)\n", ret);
+ return ret;
+ }
+
+ timeout = wait_for_completion_timeout(&i2c->completion,
+ msecs_to_jiffies(i2c->timeout_ms));
+ if (timeout == 0) {
+ dev_dbg(i2c->dev, "timeout\n");
+ return -EAGAIN;
+ }
+
+ ret = i2c->msg_idx;
+ if (ret != num) {
+ dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+ return -EAGAIN;
+ }
+
+ /* wait 2 clock periods to ensure the stop has been through the bus */
+ udelay(DIV_ROUND_UP(2 * 1000, i2c->speed_khz));
+
+ return ret;
+}
+
+static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id)
+{
+ struct synquacer_i2c *i2c = dev_id;
+
+ unsigned char byte;
+ unsigned char bsr, bcr;
+ int ret;
+
+ bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
+ bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
+ dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
+
+ if (bcr & SYNQUACER_I2C_BCR_BER) {
+ dev_err(i2c->dev, "bus error\n");
+ synquacer_i2c_stop(i2c, -EAGAIN);
+ goto out;
+ }
+ if ((bsr & SYNQUACER_I2C_BSR_AL) ||
+ !(bcr & SYNQUACER_I2C_BCR_MSS)) {
+ dev_dbg(i2c->dev, "arbitration lost\n");
+ synquacer_i2c_stop(i2c, -EAGAIN);
+ goto out;
+ }
+
+ switch (i2c->state) {
+ case STATE_START:
+ if (bsr & SYNQUACER_I2C_BSR_LRB) {
+ dev_dbg(i2c->dev, "ack was not received\n");
+ synquacer_i2c_stop(i2c, -EAGAIN);
+ goto out;
+ }
+
+ if (i2c->msg->flags & I2C_M_RD)
+ i2c->state = STATE_READ;
+ else
+ i2c->state = STATE_WRITE;
+
+ if (is_lastmsg(i2c) && i2c->msg->len == 0) {
+ synquacer_i2c_stop(i2c, 0);
+ goto out;
+ }
+
+ if (i2c->state == STATE_READ)
+ goto prepare_read;
+ fallthrough;
+
+ case STATE_WRITE:
+ if (bsr & SYNQUACER_I2C_BSR_LRB) {
+ dev_dbg(i2c->dev, "WRITE: No Ack\n");
+ synquacer_i2c_stop(i2c, -EAGAIN);
+ goto out;
+ }
+
+ if (!is_msgend(i2c)) {
+ writeb(i2c->msg->buf[i2c->msg_ptr++],
+ i2c->base + SYNQUACER_I2C_REG_DAR);
+
+ /* clear IRQ, and continue */
+ writeb(SYNQUACER_I2C_BCR_BEIE |
+ SYNQUACER_I2C_BCR_MSS |
+ SYNQUACER_I2C_BCR_INTE,
+ i2c->base + SYNQUACER_I2C_REG_BCR);
+ break;
+ }
+ if (is_lastmsg(i2c)) {
+ synquacer_i2c_stop(i2c, 0);
+ break;
+ }
+ dev_dbg(i2c->dev, "WRITE: Next Message\n");
+
+ i2c->msg_ptr = 0;
+ i2c->msg_idx++;
+ i2c->msg++;
+
+ /* send the new start */
+ ret = synquacer_i2c_master_start(i2c, i2c->msg);
+ if (ret < 0) {
+ dev_dbg(i2c->dev, "restart error (%d)\n", ret);
+ synquacer_i2c_stop(i2c, -EAGAIN);
+ break;
+ }
+ i2c->state = STATE_START;
+ break;
+
+ case STATE_READ:
+ byte = readb(i2c->base + SYNQUACER_I2C_REG_DAR);
+ if (!(bsr & SYNQUACER_I2C_BSR_FBT)) /* data */
+ i2c->msg->buf[i2c->msg_ptr++] = byte;
+ else /* address */
+ dev_dbg(i2c->dev, "address:0x%02x. ignore it.\n", byte);
+
+prepare_read:
+ if (is_msglast(i2c)) {
+ writeb(SYNQUACER_I2C_BCR_MSS |
+ SYNQUACER_I2C_BCR_BEIE |
+ SYNQUACER_I2C_BCR_INTE,
+ i2c->base + SYNQUACER_I2C_REG_BCR);
+ break;
+ }
+ if (!is_msgend(i2c)) {
+ writeb(SYNQUACER_I2C_BCR_MSS |
+ SYNQUACER_I2C_BCR_BEIE |
+ SYNQUACER_I2C_BCR_INTE |
+ SYNQUACER_I2C_BCR_ACK,
+ i2c->base + SYNQUACER_I2C_REG_BCR);
+ break;
+ }
+ if (is_lastmsg(i2c)) {
+ /* last message, send stop and complete */
+ dev_dbg(i2c->dev, "READ: Send Stop\n");
+ synquacer_i2c_stop(i2c, 0);
+ break;
+ }
+ dev_dbg(i2c->dev, "READ: Next Transfer\n");
+
+ i2c->msg_ptr = 0;
+ i2c->msg_idx++;
+ i2c->msg++;
+
+ ret = synquacer_i2c_master_start(i2c, i2c->msg);
+ if (ret < 0) {
+ dev_dbg(i2c->dev, "restart error (%d)\n", ret);
+ synquacer_i2c_stop(i2c, -EAGAIN);
+ } else {
+ i2c->state = STATE_START;
+ }
+ break;
+ default:
+ dev_err(i2c->dev, "called in err STATE (%d)\n", i2c->state);
+ break;
+ }
+
+out:
+ WAIT_PCLK(10, i2c->pclkrate);
+ return IRQ_HANDLED;
+}
+
+static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ struct synquacer_i2c *i2c;
+ int retry;
+ int ret;
+
+ i2c = i2c_get_adapdata(adap);
+ i2c->timeout_ms = calc_timeout_ms(i2c, msgs, num);
+
+ dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms);
+
+ for (retry = 0; retry <= adap->retries; retry++) {
+ ret = synquacer_i2c_doxfer(i2c, msgs, num);
+ if (ret != -EAGAIN)
+ return ret;
+
+ dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
+
+ synquacer_i2c_hw_reset(i2c);
+ }
+ return -EIO;
+}
+
+static u32 synquacer_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm synquacer_i2c_algo = {
+ .master_xfer = synquacer_i2c_xfer,
+ .functionality = synquacer_i2c_functionality,
+};
+
+static const struct i2c_adapter synquacer_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "synquacer_i2c-adapter",
+ .algo = &synquacer_i2c_algo,
+ .retries = 5,
+};
+
+static int synquacer_i2c_probe(struct platform_device *pdev)
+{
+ struct synquacer_i2c *i2c;
+ u32 bus_speed;
+ int ret;
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ bus_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+ if (!bus_speed)
+ device_property_read_u32(&pdev->dev, "clock-frequency",
+ &bus_speed);
+
+ device_property_read_u32(&pdev->dev, "socionext,pclk-rate",
+ &i2c->pclkrate);
+
+ i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (!IS_ERR_OR_NULL(i2c->pclk)) {
+ dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
+
+ ret = clk_prepare_enable(i2c->pclk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock (%d)\n",
+ ret);
+ return ret;
+ }
+ i2c->pclkrate = clk_get_rate(i2c->pclk);
+ }
+
+ if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE ||
+ i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) {
+ dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n",
+ i2c->pclkrate);
+ return -EINVAL;
+ }
+
+ i2c->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(i2c->base))
+ return PTR_ERR(i2c->base);
+
+ i2c->irq = platform_get_irq(pdev, 0);
+ if (i2c->irq < 0)
+ return i2c->irq;
+
+ ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr,
+ 0, dev_name(&pdev->dev), i2c);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+ return ret;
+ }
+
+ i2c->state = STATE_IDLE;
+ i2c->dev = &pdev->dev;
+ i2c->adapter = synquacer_i2c_ops;
+ i2c_set_adapdata(&i2c->adapter, i2c);
+ i2c->adapter.dev.parent = &pdev->dev;
+ i2c->adapter.dev.of_node = pdev->dev.of_node;
+ ACPI_COMPANION_SET(&i2c->adapter.dev, ACPI_COMPANION(&pdev->dev));
+ i2c->adapter.nr = pdev->id;
+ init_completion(&i2c->completion);
+
+ if (bus_speed < I2C_MAX_FAST_MODE_FREQ)
+ i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
+ else
+ i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;
+
+ synquacer_i2c_hw_init(i2c);
+
+ ret = i2c_add_numbered_adapter(&i2c->adapter);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, i2c);
+
+ dev_info(&pdev->dev, "%s: synquacer_i2c adapter\n",
+ dev_name(&i2c->adapter.dev));
+
+ return 0;
+}
+
+static int synquacer_i2c_remove(struct platform_device *pdev)
+{
+ struct synquacer_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adapter);
+ if (!IS_ERR(i2c->pclk))
+ clk_disable_unprepare(i2c->pclk);
+
+ return 0;
+};
+
+static const struct of_device_id synquacer_i2c_dt_ids[] = {
+ { .compatible = "socionext,synquacer-i2c" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, synquacer_i2c_dt_ids);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id synquacer_i2c_acpi_ids[] = {
+ { "SCX0003" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, synquacer_i2c_acpi_ids);
+#endif
+
+static struct platform_driver synquacer_i2c_driver = {
+ .probe = synquacer_i2c_probe,
+ .remove = synquacer_i2c_remove,
+ .driver = {
+ .name = "synquacer_i2c",
+ .of_match_table = of_match_ptr(synquacer_i2c_dt_ids),
+ .acpi_match_table = ACPI_PTR(synquacer_i2c_acpi_ids),
+ },
+};
+module_platform_driver(synquacer_i2c_driver);
+
+MODULE_AUTHOR("Fujitsu Semiconductor Ltd");
+MODULE_DESCRIPTION("Socionext SynQuacer I2C Driver");
+MODULE_LICENSE("GPL v2");