diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/iio/adc/ad7606.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h new file mode 100644 index 000000000..2dc4f599f --- /dev/null +++ b/drivers/iio/adc/ad7606.h @@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * AD7606 ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#ifndef IIO_ADC_AD7606_H_ +#define IIO_ADC_AD7606_H_ + +#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = num, \ + .address = num, \ + .info_mask_separate = mask_sep, \ + .info_mask_shared_by_type = mask_type, \ + .info_mask_shared_by_all = mask_all, \ + .scan_index = num, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define AD7605_CHANNEL(num) \ + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \ + BIT(IIO_CHAN_INFO_SCALE), 0) + +#define AD7606_CHANNEL(num) \ + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \ + BIT(IIO_CHAN_INFO_SCALE), \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) + +#define AD7616_CHANNEL(num) \ + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\ + 0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) + +/** + * struct ad7606_chip_info - chip specific information + * @channels: channel specification + * @num_channels: number of channels + * @oversampling_avail pointer to the array which stores the available + * oversampling ratios. + * @oversampling_num number of elements stored in oversampling_avail array + * @os_req_reset some devices require a reset to update oversampling + * @init_delay_ms required delay in miliseconds for initialization + * after a restart + */ +struct ad7606_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + const unsigned int *oversampling_avail; + unsigned int oversampling_num; + bool os_req_reset; + unsigned long init_delay_ms; +}; + +/** + * struct ad7606_state - driver instance specific data + * @dev pointer to kernel device + * @chip_info entry in the table of chips that describes this device + * @reg regulator info for the power supply of the device + * @bops bus operations (SPI or parallel) + * @range voltage range selection, selects which scale to apply + * @oversampling oversampling selection + * @base_address address from where to read data in parallel operation + * @sw_mode_en software mode enabled + * @scale_avail pointer to the array which stores the available scales + * @num_scales number of elements stored in the scale_avail array + * @oversampling_avail pointer to the array which stores the available + * oversampling ratios. + * @num_os_ratios number of elements stored in oversampling_avail array + * @write_scale pointer to the function which writes the scale + * @write_os pointer to the function which writes the os + * @lock protect sensor state from concurrent accesses to GPIOs + * @gpio_convst GPIO descriptor for conversion start signal (CONVST) + * @gpio_reset GPIO descriptor for device hard-reset + * @gpio_range GPIO descriptor for range selection + * @gpio_standby GPIO descriptor for stand-by signal (STBY), + * controls power-down mode of device + * @gpio_frstdata GPIO descriptor for reading from device when data + * is being read on the first channel + * @gpio_os GPIO descriptors to control oversampling on the device + * @complete completion to indicate end of conversion + * @trig The IIO trigger associated with the device. + * @data buffer for reading data from the device + * @d16 be16 buffer for reading data from the device + */ +struct ad7606_state { + struct device *dev; + const struct ad7606_chip_info *chip_info; + struct regulator *reg; + const struct ad7606_bus_ops *bops; + unsigned int range[16]; + unsigned int oversampling; + void __iomem *base_address; + bool sw_mode_en; + const unsigned int *scale_avail; + unsigned int num_scales; + const unsigned int *oversampling_avail; + unsigned int num_os_ratios; + int (*write_scale)(struct iio_dev *indio_dev, int ch, int val); + int (*write_os)(struct iio_dev *indio_dev, int val); + + struct mutex lock; /* protect sensor state */ + struct gpio_desc *gpio_convst; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_range; + struct gpio_desc *gpio_standby; + struct gpio_desc *gpio_frstdata; + struct gpio_descs *gpio_os; + struct iio_trigger *trig; + struct completion completion; + + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + * 16 * 16-bit samples + 64-bit timestamp + */ + unsigned short data[20] __aligned(IIO_DMA_MINALIGN); + __be16 d16[2]; +}; + +/** + * struct ad7606_bus_ops - driver bus operations + * @read_block function pointer for reading blocks of data + * @sw_mode_config: pointer to a function which configured the device + * for software mode + * @reg_read function pointer for reading spi register + * @reg_write function pointer for writing spi register + * @write_mask function pointer for write spi register with mask + * @rd_wr_cmd pointer to the function which calculates the spi address + */ +struct ad7606_bus_ops { + /* more methods added in future? */ + int (*read_block)(struct device *dev, int num, void *data); + int (*sw_mode_config)(struct iio_dev *indio_dev); + int (*reg_read)(struct ad7606_state *st, unsigned int addr); + int (*reg_write)(struct ad7606_state *st, + unsigned int addr, + unsigned int val); + int (*write_mask)(struct ad7606_state *st, + unsigned int addr, + unsigned long mask, + unsigned int val); + u16 (*rd_wr_cmd)(int addr, char isWriteOp); +}; + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops); + +enum ad7606_supported_device_ids { + ID_AD7605_4, + ID_AD7606_8, + ID_AD7606_6, + ID_AD7606_4, + ID_AD7606B, + ID_AD7616, +}; + +#ifdef CONFIG_PM_SLEEP +extern const struct dev_pm_ops ad7606_pm_ops; +#define AD7606_PM_OPS (&ad7606_pm_ops) +#else +#define AD7606_PM_OPS NULL +#endif + +#endif /* IIO_ADC_AD7606_H_ */ |