diff options
Diffstat (limited to '')
24 files changed, 8622 insertions, 0 deletions
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig new file mode 100644 index 000000000..c30657e10 --- /dev/null +++ b/drivers/iio/chemical/Kconfig @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Chemical sensors +# + +menu "Chemical Sensors" + +config ATLAS_PH_SENSOR + tristate "Atlas Scientific OEM SM sensors" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here to build I2C interface support for the following + Atlas Scientific OEM SM sensors: + * pH SM sensor + * EC SM sensor + * ORP SM sensor + + To compile this driver as module, choose M here: the + module will be called atlas-ph-sensor. + +config ATLAS_EZO_SENSOR + tristate "Atlas Scientific EZO sensors" + depends on I2C + help + Say Y here to build I2C interface support for the following + Atlas Scientific EZO sensors + * CO2 EZO Sensor + + To compile this driver as module, choose M here: the + module will be called atlas-ezo-sensor. + +config BME680 + tristate "Bosch Sensortec BME680 sensor driver" + depends on (I2C || SPI) + select REGMAP + select BME680_I2C if I2C + select BME680_SPI if SPI + help + Say yes here to build support for Bosch Sensortec BME680 sensor with + temperature, pressure, humidity and gas sensing capability. + + This driver can also be built as a module. If so, the module for I2C + would be called bme680_i2c and bme680_spi for SPI support. + +config BME680_I2C + tristate + depends on I2C && BME680 + select REGMAP_I2C + +config BME680_SPI + tristate + depends on SPI && BME680 + select REGMAP_SPI + +config CCS811 + tristate "AMS CCS811 VOC sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build I2C interface support for the AMS + CCS811 VOC (Volatile Organic Compounds) sensor + +config IAQCORE + tristate "AMS iAQ-Core VOC sensors" + depends on I2C + help + Say Y here to build I2C interface support for the AMS + iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) + sensors + +config PMS7003 + tristate "Plantower PMS7003 particulate matter sensor" + depends on SERIAL_DEV_BUS + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Plantower PMS7003 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called pms7003. + +config SCD30_CORE + tristate "SCD30 carbon dioxide sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Sensirion SCD30 sensor with carbon + dioxide, relative humidity and temperature sensing capabilities. + + To compile this driver as a module, choose M here: the module will + be called scd30_core. + +config SCD30_I2C + tristate "SCD30 carbon dioxide sensor I2C driver" + depends on SCD30_CORE && I2C + select CRC8 + help + Say Y here to build support for the Sensirion SCD30 I2C interface + driver. + + To compile this driver as a module, choose M here: the module will + be called scd30_i2c. + +config SCD30_SERIAL + tristate "SCD30 carbon dioxide sensor serial driver" + depends on SCD30_CORE && SERIAL_DEV_BUS + select CRC16 + help + Say Y here to build support for the Sensirion SCD30 serial interface + driver. + + To compile this driver as a module, choose M here: the module will + be called scd30_serial. + +config SCD4X + tristate "SCD4X carbon dioxide sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + select CRC8 + help + Say Y here to build support for the Sensirion SCD4X sensor with carbon + dioxide, relative humidity and temperature sensing capabilities. + + To compile this driver as a module, choose M here: the module will + be called scd4x. + +config SENSIRION_SGP30 + tristate "Sensirion SGPxx gas sensors" + depends on I2C + select CRC8 + help + Say Y here to build I2C interface support for the following + Sensirion SGP gas sensors: + * SGP30 gas sensor + * SGPC3 low power gas sensor + + To compile this driver as module, choose M here: the + module will be called sgp30. + +config SENSIRION_SGP40 + tristate "Sensirion SGP40 gas sensor" + depends on I2C + select CRC8 + help + Say Y here to build I2C interface to support Sensirion SGP40 gas + sensor + + To compile this driver as module, choose M here: the + module will be called sgp40. + +config SPS30 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SPS30_I2C + tristate "SPS30 particulate matter sensor I2C driver" + depends on I2C + select SPS30 + select CRC8 + help + Say Y here to build support for the Sensirion SPS30 I2C interface + driver. + + To compile this driver as a module, choose M here: the module will + be called sps30_i2c. + +config SPS30_SERIAL + tristate "SPS30 particulate matter sensor serial driver" + depends on SERIAL_DEV_BUS + select SPS30 + help + Say Y here to build support for the Sensirion SPS30 serial interface + driver. + + To compile this driver as a module, choose M here: the module will + be called sps30_serial. + +config SENSEAIR_SUNRISE_CO2 + tristate "Senseair Sunrise 006-0-0007 CO2 sensor" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Senseair Sunrise 006-0-0007 CO2 + sensor. + + To compile this driver as a module, choose M here: the + module will be called sunrise_co2. + +config VZ89X + tristate "SGX Sensortech MiCS VZ89X VOC sensor" + depends on I2C + help + Say Y here to build I2C interface support for the SGX + Sensortech MiCS VZ89X VOC (Volatile Organic Compounds) + sensors + +endmenu diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile new file mode 100644 index 000000000..a11e777a7 --- /dev/null +++ b/drivers/iio/chemical/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for IIO chemical sensors +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-sensor.o +obj-$(CONFIG_ATLAS_EZO_SENSOR) += atlas-ezo-sensor.o +obj-$(CONFIG_BME680) += bme680_core.o +obj-$(CONFIG_BME680_I2C) += bme680_i2c.o +obj-$(CONFIG_BME680_SPI) += bme680_spi.o +obj-$(CONFIG_CCS811) += ccs811.o +obj-$(CONFIG_IAQCORE) += ams-iaq-core.o +obj-$(CONFIG_PMS7003) += pms7003.o +obj-$(CONFIG_SCD30_CORE) += scd30_core.o +obj-$(CONFIG_SCD30_I2C) += scd30_i2c.o +obj-$(CONFIG_SCD30_SERIAL) += scd30_serial.o +obj-$(CONFIG_SCD4X) += scd4x.o +obj-$(CONFIG_SENSEAIR_SUNRISE_CO2) += sunrise_co2.o +obj-$(CONFIG_SENSIRION_SGP30) += sgp30.o +obj-$(CONFIG_SENSIRION_SGP40) += sgp40.o +obj-$(CONFIG_SPS30) += sps30.o +obj-$(CONFIG_SPS30_I2C) += sps30_i2c.o +obj-$(CONFIG_SPS30_SERIAL) += sps30_serial.o +obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/ams-iaq-core.c b/drivers/iio/chemical/ams-iaq-core.c new file mode 100644 index 000000000..97be3669c --- /dev/null +++ b/drivers/iio/chemical/ams-iaq-core.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ams-iaq-core.c - Support for AMS iAQ-Core VOC sensors + * + * Copyright (C) 2015, 2018 + * Author: Matt Ranostay <matt.ranostay@konsulko.com> + */ + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> + +#define AMS_IAQCORE_DATA_SIZE 9 + +#define AMS_IAQCORE_VOC_CO2_IDX 0 +#define AMS_IAQCORE_VOC_RESISTANCE_IDX 1 +#define AMS_IAQCORE_VOC_TVOC_IDX 2 + +struct ams_iaqcore_reading { + __be16 co2_ppm; + u8 status; + __be32 resistance; + __be16 voc_ppb; +} __attribute__((__packed__)); + +struct ams_iaqcore_data { + struct i2c_client *client; + struct mutex lock; + unsigned long last_update; + + struct ams_iaqcore_reading buffer; +}; + +static const struct iio_chan_spec ams_iaqcore_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_CO2_IDX, + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_RESISTANCE_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_TVOC_IDX, + }, +}; + +static int ams_iaqcore_read_measurement(struct ams_iaqcore_data *data) +{ + struct i2c_client *client = data->client; + int ret; + + struct i2c_msg msg = { + .addr = client->addr, + .flags = client->flags | I2C_M_RD, + .len = AMS_IAQCORE_DATA_SIZE, + .buf = (char *) &data->buffer, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + + return (ret == AMS_IAQCORE_DATA_SIZE) ? 0 : ret; +} + +static int ams_iaqcore_get_measurement(struct ams_iaqcore_data *data) +{ + int ret; + + /* sensor can only be polled once a second max per datasheet */ + if (!time_after(jiffies, data->last_update + HZ)) + return 0; + + ret = ams_iaqcore_read_measurement(data); + if (ret < 0) + return ret; + + data->last_update = jiffies; + + return 0; +} + +static int ams_iaqcore_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ams_iaqcore_data *data = iio_priv(indio_dev); + int ret; + + if (mask != IIO_CHAN_INFO_PROCESSED) + return -EINVAL; + + mutex_lock(&data->lock); + ret = ams_iaqcore_get_measurement(data); + + if (ret) + goto err_out; + + switch (chan->address) { + case AMS_IAQCORE_VOC_CO2_IDX: + *val = 0; + *val2 = be16_to_cpu(data->buffer.co2_ppm); + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case AMS_IAQCORE_VOC_RESISTANCE_IDX: + *val = be32_to_cpu(data->buffer.resistance); + ret = IIO_VAL_INT; + break; + case AMS_IAQCORE_VOC_TVOC_IDX: + *val = 0; + *val2 = be16_to_cpu(data->buffer.voc_ppb); + ret = IIO_VAL_INT_PLUS_NANO; + break; + default: + ret = -EINVAL; + } + +err_out: + mutex_unlock(&data->lock); + + return ret; +} + +static const struct iio_info ams_iaqcore_info = { + .read_raw = ams_iaqcore_read_raw, +}; + +static int ams_iaqcore_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ams_iaqcore_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + /* so initial reading will complete */ + data->last_update = jiffies - HZ; + mutex_init(&data->lock); + + indio_dev->info = &ams_iaqcore_info; + indio_dev->name = dev_name(&client->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + + indio_dev->channels = ams_iaqcore_channels; + indio_dev->num_channels = ARRAY_SIZE(ams_iaqcore_channels); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id ams_iaqcore_id[] = { + { "ams-iaq-core", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ams_iaqcore_id); + +static const struct of_device_id ams_iaqcore_dt_ids[] = { + { .compatible = "ams,iaq-core" }, + { } +}; +MODULE_DEVICE_TABLE(of, ams_iaqcore_dt_ids); + +static struct i2c_driver ams_iaqcore_driver = { + .driver = { + .name = "ams-iaq-core", + .of_match_table = ams_iaqcore_dt_ids, + }, + .probe = ams_iaqcore_probe, + .id_table = ams_iaqcore_id, +}; +module_i2c_driver(ams_iaqcore_driver); + +MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); +MODULE_DESCRIPTION("AMS iAQ-Core VOC sensors"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/atlas-ezo-sensor.c b/drivers/iio/chemical/atlas-ezo-sensor.c new file mode 100644 index 000000000..bbcf5a59c --- /dev/null +++ b/drivers/iio/chemical/atlas-ezo-sensor.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * atlas-ezo-sensor.c - Support for Atlas Scientific EZO sensors + * + * Copyright (C) 2020 Konsulko Group + * Author: Matt Ranostay <matt.ranostay@konsulko.com> + */ + +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/property.h> +#include <linux/err.h> +#include <linux/i2c.h> + +#include <linux/iio/iio.h> + +#define ATLAS_EZO_DRV_NAME "atlas-ezo-sensor" +#define ATLAS_INT_TIME_IN_MS 950 +#define ATLAS_INT_HUM_TIME_IN_MS 350 + +enum { + ATLAS_CO2_EZO, + ATLAS_O2_EZO, + ATLAS_HUM_EZO, +}; + +struct atlas_ezo_device { + const struct iio_chan_spec *channels; + int num_channels; + int delay; +}; + +struct atlas_ezo_data { + struct i2c_client *client; + const struct atlas_ezo_device *chip; + + /* lock to avoid multiple concurrent read calls */ + struct mutex lock; + + u8 buffer[8]; +}; + +#define ATLAS_CONCENTRATION_CHANNEL(_modifier) \ + { \ + .type = IIO_CONCENTRATION, \ + .modified = 1,\ + .channel2 = _modifier, \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = 0, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ + } + +static const struct iio_chan_spec atlas_co2_ezo_channels[] = { + ATLAS_CONCENTRATION_CHANNEL(IIO_MOD_CO2), +}; + +static const struct iio_chan_spec atlas_o2_ezo_channels[] = { + ATLAS_CONCENTRATION_CHANNEL(IIO_MOD_O2), +}; + +static const struct iio_chan_spec atlas_hum_ezo_channels[] = { + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, +}; + +static struct atlas_ezo_device atlas_ezo_devices[] = { + [ATLAS_CO2_EZO] = { + .channels = atlas_co2_ezo_channels, + .num_channels = 1, + .delay = ATLAS_INT_TIME_IN_MS, + }, + [ATLAS_O2_EZO] = { + .channels = atlas_o2_ezo_channels, + .num_channels = 1, + .delay = ATLAS_INT_TIME_IN_MS, + }, + [ATLAS_HUM_EZO] = { + .channels = atlas_hum_ezo_channels, + .num_channels = 1, + .delay = ATLAS_INT_HUM_TIME_IN_MS, + }, +}; + +static void atlas_ezo_sanitize(char *buf) +{ + char *ptr = strchr(buf, '.'); + + if (!ptr) + return; + + memmove(ptr, ptr + 1, strlen(ptr)); +} + +static int atlas_ezo_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct atlas_ezo_data *data = iio_priv(indio_dev); + struct i2c_client *client = data->client; + + if (chan->type != IIO_CONCENTRATION) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret; + long tmp; + + mutex_lock(&data->lock); + + tmp = i2c_smbus_write_byte(client, 'R'); + + if (tmp < 0) { + mutex_unlock(&data->lock); + return tmp; + } + + msleep(data->chip->delay); + + tmp = i2c_master_recv(client, data->buffer, sizeof(data->buffer)); + + if (tmp < 0 || data->buffer[0] != 1) { + mutex_unlock(&data->lock); + return -EBUSY; + } + + /* removing floating point for fixed number representation */ + atlas_ezo_sanitize(data->buffer + 2); + + ret = kstrtol(data->buffer + 1, 10, &tmp); + + *val = tmp; + + mutex_unlock(&data->lock); + + return ret ? ret : IIO_VAL_INT; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + *val = 10; + return IIO_VAL_INT; + case IIO_CONCENTRATION: + break; + default: + return -EINVAL; + } + + /* IIO_CONCENTRATION modifiers */ + switch (chan->channel2) { + case IIO_MOD_CO2: + *val = 0; + *val2 = 100; /* 0.0001 */ + return IIO_VAL_INT_PLUS_MICRO; + case IIO_MOD_O2: + *val = 100; + return IIO_VAL_INT; + } + return -EINVAL; + } + + return 0; +} + +static const struct iio_info atlas_info = { + .read_raw = atlas_ezo_read_raw, +}; + +static const struct i2c_device_id atlas_ezo_id[] = { + { "atlas-co2-ezo", (kernel_ulong_t)&atlas_ezo_devices[ATLAS_CO2_EZO] }, + { "atlas-o2-ezo", (kernel_ulong_t)&atlas_ezo_devices[ATLAS_O2_EZO] }, + { "atlas-hum-ezo", (kernel_ulong_t)&atlas_ezo_devices[ATLAS_HUM_EZO] }, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_ezo_id); + +static const struct of_device_id atlas_ezo_dt_ids[] = { + { .compatible = "atlas,co2-ezo", .data = &atlas_ezo_devices[ATLAS_CO2_EZO], }, + { .compatible = "atlas,o2-ezo", .data = &atlas_ezo_devices[ATLAS_O2_EZO], }, + { .compatible = "atlas,hum-ezo", .data = &atlas_ezo_devices[ATLAS_HUM_EZO], }, + {} +}; +MODULE_DEVICE_TABLE(of, atlas_ezo_dt_ids); + +static int atlas_ezo_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct atlas_ezo_device *chip; + struct atlas_ezo_data *data; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + if (dev_fwnode(&client->dev)) + chip = device_get_match_data(&client->dev); + else + chip = (const struct atlas_ezo_device *)id->driver_data; + if (!chip) + return -EINVAL; + + indio_dev->info = &atlas_info; + indio_dev->name = ATLAS_EZO_DRV_NAME; + indio_dev->channels = chip->channels; + indio_dev->num_channels = chip->num_channels; + indio_dev->modes = INDIO_DIRECT_MODE; + + data = iio_priv(indio_dev); + data->client = client; + data->chip = chip; + mutex_init(&data->lock); + + return devm_iio_device_register(&client->dev, indio_dev); +}; + +static struct i2c_driver atlas_ezo_driver = { + .driver = { + .name = ATLAS_EZO_DRV_NAME, + .of_match_table = atlas_ezo_dt_ids, + }, + .probe = atlas_ezo_probe, + .id_table = atlas_ezo_id, +}; +module_i2c_driver(atlas_ezo_driver); + +MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); +MODULE_DESCRIPTION("Atlas Scientific EZO sensors"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c new file mode 100644 index 000000000..7cac77a93 --- /dev/null +++ b/drivers/iio/chemical/atlas-sensor.c @@ -0,0 +1,778 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * atlas-sensor.c - Support for Atlas Scientific OEM SM sensors + * + * Copyright (C) 2015-2019 Konsulko Group + * Author: Matt Ranostay <matt.ranostay@konsulko.com> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/irq_work.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/pm_runtime.h> + +#define ATLAS_REGMAP_NAME "atlas_regmap" +#define ATLAS_DRV_NAME "atlas" + +#define ATLAS_REG_DEV_TYPE 0x00 +#define ATLAS_REG_DEV_VERSION 0x01 + +#define ATLAS_REG_INT_CONTROL 0x04 +#define ATLAS_REG_INT_CONTROL_EN BIT(3) + +#define ATLAS_REG_PWR_CONTROL 0x06 + +#define ATLAS_REG_PH_CALIB_STATUS 0x0d +#define ATLAS_REG_PH_CALIB_STATUS_MASK 0x07 +#define ATLAS_REG_PH_CALIB_STATUS_LOW BIT(0) +#define ATLAS_REG_PH_CALIB_STATUS_MID BIT(1) +#define ATLAS_REG_PH_CALIB_STATUS_HIGH BIT(2) + +#define ATLAS_REG_EC_CALIB_STATUS 0x0f +#define ATLAS_REG_EC_CALIB_STATUS_MASK 0x0f +#define ATLAS_REG_EC_CALIB_STATUS_DRY BIT(0) +#define ATLAS_REG_EC_CALIB_STATUS_SINGLE BIT(1) +#define ATLAS_REG_EC_CALIB_STATUS_LOW BIT(2) +#define ATLAS_REG_EC_CALIB_STATUS_HIGH BIT(3) + +#define ATLAS_REG_DO_CALIB_STATUS 0x09 +#define ATLAS_REG_DO_CALIB_STATUS_MASK 0x03 +#define ATLAS_REG_DO_CALIB_STATUS_PRESSURE BIT(0) +#define ATLAS_REG_DO_CALIB_STATUS_DO BIT(1) + +#define ATLAS_REG_RTD_DATA 0x0e + +#define ATLAS_REG_PH_TEMP_DATA 0x0e +#define ATLAS_REG_PH_DATA 0x16 + +#define ATLAS_REG_EC_PROBE 0x08 +#define ATLAS_REG_EC_TEMP_DATA 0x10 +#define ATLAS_REG_EC_DATA 0x18 +#define ATLAS_REG_TDS_DATA 0x1c +#define ATLAS_REG_PSS_DATA 0x20 + +#define ATLAS_REG_ORP_CALIB_STATUS 0x0d +#define ATLAS_REG_ORP_DATA 0x0e + +#define ATLAS_REG_DO_TEMP_DATA 0x12 +#define ATLAS_REG_DO_DATA 0x22 + +#define ATLAS_PH_INT_TIME_IN_MS 450 +#define ATLAS_EC_INT_TIME_IN_MS 650 +#define ATLAS_ORP_INT_TIME_IN_MS 450 +#define ATLAS_DO_INT_TIME_IN_MS 450 +#define ATLAS_RTD_INT_TIME_IN_MS 450 + +enum { + ATLAS_PH_SM, + ATLAS_EC_SM, + ATLAS_ORP_SM, + ATLAS_DO_SM, + ATLAS_RTD_SM, +}; + +struct atlas_data { + struct i2c_client *client; + struct iio_trigger *trig; + struct atlas_device *chip; + struct regmap *regmap; + struct irq_work work; + unsigned int interrupt_enabled; + /* 96-bit data + 32-bit pad + 64-bit timestamp */ + __be32 buffer[6] __aligned(8); +}; + +static const struct regmap_config atlas_regmap_config = { + .name = ATLAS_REGMAP_NAME, + .reg_bits = 8, + .val_bits = 8, +}; + +static int atlas_buffer_num_channels(const struct iio_chan_spec *spec) +{ + int idx = 0; + + for (; spec->type != IIO_TIMESTAMP; spec++) + idx++; + + return idx; +}; + +static const struct iio_chan_spec atlas_ph_channels[] = { + { + .type = IIO_PH, + .address = ATLAS_REG_PH_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), + { + .type = IIO_TEMP, + .address = ATLAS_REG_PH_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +#define ATLAS_CONCENTRATION_CHANNEL(_idx, _addr) \ + {\ + .type = IIO_CONCENTRATION, \ + .indexed = 1, \ + .channel = _idx, \ + .address = _addr, \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = _idx + 1, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec atlas_ec_channels[] = { + { + .type = IIO_ELECTRICALCONDUCTIVITY, + .address = ATLAS_REG_EC_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + ATLAS_CONCENTRATION_CHANNEL(0, ATLAS_REG_TDS_DATA), + ATLAS_CONCENTRATION_CHANNEL(1, ATLAS_REG_PSS_DATA), + IIO_CHAN_SOFT_TIMESTAMP(3), + { + .type = IIO_TEMP, + .address = ATLAS_REG_EC_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static const struct iio_chan_spec atlas_orp_channels[] = { + { + .type = IIO_VOLTAGE, + .address = ATLAS_REG_ORP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), +}; + +static const struct iio_chan_spec atlas_do_channels[] = { + { + .type = IIO_CONCENTRATION, + .address = ATLAS_REG_DO_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), + { + .type = IIO_TEMP, + .address = ATLAS_REG_DO_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static const struct iio_chan_spec atlas_rtd_channels[] = { + { + .type = IIO_TEMP, + .address = ATLAS_REG_RTD_DATA, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), +}; + +static int atlas_check_ph_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_PH_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_MID)) + dev_warn(dev, "device missing mid point calibration\n"); + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + + return 0; +} + +static int atlas_check_ec_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + __be16 rval; + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &rval, 2); + if (ret) + return ret; + + val = be16_to_cpu(rval); + dev_info(dev, "probe set to K = %d.%.2d", val / 100, val % 100); + + ret = regmap_read(data->regmap, ATLAS_REG_EC_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_EC_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_EC_CALIB_STATUS_DRY)) + dev_warn(dev, "device missing dry point calibration\n"); + + if (val & ATLAS_REG_EC_CALIB_STATUS_SINGLE) { + dev_warn(dev, "device using single point calibration\n"); + } else { + if (!(val & ATLAS_REG_EC_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_EC_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + } + + return 0; +} + +static int atlas_check_orp_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_ORP_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!val) + dev_warn(dev, "device has not been calibrated\n"); + + return 0; +} + +static int atlas_check_do_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_DO_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_DO_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_DO_CALIB_STATUS_PRESSURE)) + dev_warn(dev, "device missing atmospheric pressure calibration\n"); + + if (!(val & ATLAS_REG_DO_CALIB_STATUS_DO)) + dev_warn(dev, "device missing dissolved oxygen calibration\n"); + + return 0; +} + +struct atlas_device { + const struct iio_chan_spec *channels; + int num_channels; + int data_reg; + + int (*calibration)(struct atlas_data *data); + int delay; +}; + +static struct atlas_device atlas_devices[] = { + [ATLAS_PH_SM] = { + .channels = atlas_ph_channels, + .num_channels = 3, + .data_reg = ATLAS_REG_PH_DATA, + .calibration = &atlas_check_ph_calibration, + .delay = ATLAS_PH_INT_TIME_IN_MS, + }, + [ATLAS_EC_SM] = { + .channels = atlas_ec_channels, + .num_channels = 5, + .data_reg = ATLAS_REG_EC_DATA, + .calibration = &atlas_check_ec_calibration, + .delay = ATLAS_EC_INT_TIME_IN_MS, + }, + [ATLAS_ORP_SM] = { + .channels = atlas_orp_channels, + .num_channels = 2, + .data_reg = ATLAS_REG_ORP_DATA, + .calibration = &atlas_check_orp_calibration, + .delay = ATLAS_ORP_INT_TIME_IN_MS, + }, + [ATLAS_DO_SM] = { + .channels = atlas_do_channels, + .num_channels = 3, + .data_reg = ATLAS_REG_DO_DATA, + .calibration = &atlas_check_do_calibration, + .delay = ATLAS_DO_INT_TIME_IN_MS, + }, + [ATLAS_RTD_SM] = { + .channels = atlas_rtd_channels, + .num_channels = 2, + .data_reg = ATLAS_REG_RTD_DATA, + .delay = ATLAS_RTD_INT_TIME_IN_MS, + }, +}; + +static int atlas_set_powermode(struct atlas_data *data, int on) +{ + return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on); +} + +static int atlas_set_interrupt(struct atlas_data *data, bool state) +{ + if (!data->interrupt_enabled) + return 0; + + return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL, + ATLAS_REG_INT_CONTROL_EN, + state ? ATLAS_REG_INT_CONTROL_EN : 0); +} + +static int atlas_buffer_postenable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = pm_runtime_resume_and_get(&data->client->dev); + if (ret) + return ret; + + return atlas_set_interrupt(data, true); +} + +static int atlas_buffer_predisable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = atlas_set_interrupt(data, false); + if (ret) + return ret; + + pm_runtime_mark_last_busy(&data->client->dev); + ret = pm_runtime_put_autosuspend(&data->client->dev); + if (ret) + return ret; + + return 0; +} + +static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = { + .postenable = atlas_buffer_postenable, + .predisable = atlas_buffer_predisable, +}; + +static void atlas_work_handler(struct irq_work *work) +{ + struct atlas_data *data = container_of(work, struct atlas_data, work); + + iio_trigger_poll(data->trig); +} + +static irqreturn_t atlas_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct atlas_data *data = iio_priv(indio_dev); + int channels = atlas_buffer_num_channels(data->chip->channels); + int ret; + + ret = regmap_bulk_read(data->regmap, data->chip->data_reg, + &data->buffer, sizeof(__be32) * channels); + + if (!ret) + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns(indio_dev)); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t atlas_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct atlas_data *data = iio_priv(indio_dev); + + irq_work_queue(&data->work); + + return IRQ_HANDLED; +} + +static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val) +{ + struct device *dev = &data->client->dev; + int suspended = pm_runtime_suspended(dev); + int ret; + + ret = pm_runtime_resume_and_get(dev); + if (ret) + return ret; + + if (suspended) + msleep(data->chip->delay); + + ret = regmap_bulk_read(data->regmap, reg, val, sizeof(*val)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static int atlas_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + case IIO_CHAN_INFO_RAW: { + int ret; + __be32 reg; + + switch (chan->type) { + case IIO_TEMP: + ret = regmap_bulk_read(data->regmap, chan->address, + ®, sizeof(reg)); + break; + case IIO_PH: + case IIO_CONCENTRATION: + case IIO_ELECTRICALCONDUCTIVITY: + case IIO_VOLTAGE: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = atlas_read_measurement(data, chan->address, ®); + + iio_device_release_direct_mode(indio_dev); + break; + default: + ret = -EINVAL; + } + + if (!ret) { + *val = be32_to_cpu(reg); + ret = IIO_VAL_INT; + } + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + case IIO_PH: + *val = 1; /* 0.001 */ + *val2 = 1000; + break; + case IIO_ELECTRICALCONDUCTIVITY: + *val = 1; /* 0.00001 */ + *val2 = 100000; + break; + case IIO_CONCENTRATION: + *val = 0; /* 0.000000001 */ + *val2 = 1000; + return IIO_VAL_INT_PLUS_NANO; + case IIO_VOLTAGE: + *val = 1; /* 0.1 */ + *val2 = 10; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int atlas_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + __be32 reg = cpu_to_be32(val / 10); + + if (val2 != 0 || val < 0 || val > 20000) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP) + return -EINVAL; + + return regmap_bulk_write(data->regmap, chan->address, + ®, sizeof(reg)); +} + +static const struct iio_info atlas_info = { + .read_raw = atlas_read_raw, + .write_raw = atlas_write_raw, +}; + +static const struct i2c_device_id atlas_id[] = { + { "atlas-ph-sm", ATLAS_PH_SM }, + { "atlas-ec-sm", ATLAS_EC_SM }, + { "atlas-orp-sm", ATLAS_ORP_SM }, + { "atlas-do-sm", ATLAS_DO_SM }, + { "atlas-rtd-sm", ATLAS_RTD_SM }, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_id); + +static const struct of_device_id atlas_dt_ids[] = { + { .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, }, + { .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, }, + { .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, }, + { .compatible = "atlas,do-sm", .data = (void *)ATLAS_DO_SM, }, + { .compatible = "atlas,rtd-sm", .data = (void *)ATLAS_RTD_SM, }, + { } +}; +MODULE_DEVICE_TABLE(of, atlas_dt_ids); + +static int atlas_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atlas_data *data; + struct atlas_device *chip; + struct iio_trigger *trig; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + if (!dev_fwnode(&client->dev)) + chip = &atlas_devices[id->driver_data]; + else + chip = &atlas_devices[(unsigned long)device_get_match_data(&client->dev)]; + + indio_dev->info = &atlas_info; + indio_dev->name = ATLAS_DRV_NAME; + indio_dev->channels = chip->channels; + indio_dev->num_channels = chip->num_channels; + indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE; + + trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", + indio_dev->name, iio_device_id(indio_dev)); + + if (!trig) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + data->trig = trig; + data->chip = chip; + iio_trigger_set_drvdata(trig, indio_dev); + + i2c_set_clientdata(client, indio_dev); + + data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + ret = chip->calibration(data); + if (ret) + return ret; + + ret = iio_trigger_register(trig); + if (ret) { + dev_err(&client->dev, "failed to register trigger\n"); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &atlas_trigger_handler, &atlas_buffer_setup_ops); + if (ret) { + dev_err(&client->dev, "cannot setup iio trigger\n"); + goto unregister_trigger; + } + + init_irq_work(&data->work, atlas_work_handler); + + if (client->irq > 0) { + /* interrupt pin toggles on new conversion */ + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, atlas_interrupt_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "atlas_irq", + indio_dev); + + if (ret) + dev_warn(&client->dev, + "request irq (%d) failed\n", client->irq); + else + data->interrupt_enabled = 1; + } + + ret = atlas_set_powermode(data, 1); + if (ret) { + dev_err(&client->dev, "cannot power device on"); + goto unregister_buffer; + } + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, 2500); + pm_runtime_use_autosuspend(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&client->dev, "unable to register device\n"); + goto unregister_pm; + } + + return 0; + +unregister_pm: + pm_runtime_disable(&client->dev); + atlas_set_powermode(data, 0); + +unregister_buffer: + iio_triggered_buffer_cleanup(indio_dev); + +unregister_trigger: + iio_trigger_unregister(data->trig); + + return ret; +} + +static void atlas_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + + ret = atlas_set_powermode(data, 0); + if (ret) + dev_err(&client->dev, "Failed to power down device (%pe)\n", + ERR_PTR(ret)); +} + +static int atlas_runtime_suspend(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 0); +} + +static int atlas_runtime_resume(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 1); +} + +static const struct dev_pm_ops atlas_pm_ops = { + RUNTIME_PM_OPS(atlas_runtime_suspend, atlas_runtime_resume, NULL) +}; + +static struct i2c_driver atlas_driver = { + .driver = { + .name = ATLAS_DRV_NAME, + .of_match_table = atlas_dt_ids, + .pm = pm_ptr(&atlas_pm_ops), + }, + .probe = atlas_probe, + .remove = atlas_remove, + .id_table = atlas_id, +}; +module_i2c_driver(atlas_driver); + +MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); +MODULE_DESCRIPTION("Atlas Scientific SM sensors"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h new file mode 100644 index 000000000..4edc5d21c --- /dev/null +++ b/drivers/iio/chemical/bme680.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BME680_H_ +#define BME680_H_ + +#define BME680_REG_CHIP_ID 0xD0 +#define BME680_CHIP_ID_VAL 0x61 +#define BME680_REG_SOFT_RESET 0xE0 +#define BME680_CMD_SOFTRESET 0xB6 +#define BME680_REG_STATUS 0x73 +#define BME680_SPI_MEM_PAGE_BIT BIT(4) +#define BME680_SPI_MEM_PAGE_1_VAL 1 + +#define BME680_REG_TEMP_MSB 0x22 +#define BME680_REG_PRESS_MSB 0x1F +#define BM6880_REG_HUMIDITY_MSB 0x25 +#define BME680_REG_GAS_MSB 0x2A +#define BME680_REG_GAS_R_LSB 0x2B +#define BME680_GAS_STAB_BIT BIT(4) +#define BME680_GAS_RANGE_MASK GENMASK(3, 0) + +#define BME680_REG_CTRL_HUMIDITY 0x72 +#define BME680_OSRS_HUMIDITY_MASK GENMASK(2, 0) + +#define BME680_REG_CTRL_MEAS 0x74 +#define BME680_OSRS_TEMP_MASK GENMASK(7, 5) +#define BME680_OSRS_PRESS_MASK GENMASK(4, 2) +#define BME680_MODE_MASK GENMASK(1, 0) +#define BME680_MODE_FORCED 1 +#define BME680_MODE_SLEEP 0 + +#define BME680_REG_CONFIG 0x75 +#define BME680_FILTER_MASK GENMASK(4, 2) +#define BME680_FILTER_COEFF_VAL BIT(1) + +/* TEMP/PRESS/HUMID reading skipped */ +#define BME680_MEAS_SKIPPED 0x8000 + +#define BME680_MAX_OVERFLOW_VAL 0x40000000 +#define BME680_HUM_REG_SHIFT_VAL 4 +#define BME680_BIT_H1_DATA_MASK GENMASK(3, 0) + +#define BME680_REG_RES_HEAT_RANGE 0x02 +#define BME680_RHRANGE_MASK GENMASK(5, 4) +#define BME680_REG_RES_HEAT_VAL 0x00 +#define BME680_REG_RANGE_SW_ERR 0x04 +#define BME680_RSERROR_MASK GENMASK(7, 4) +#define BME680_REG_RES_HEAT_0 0x5A +#define BME680_REG_GAS_WAIT_0 0x64 +#define BME680_ADC_GAS_RES_SHIFT 6 +#define BME680_AMB_TEMP 25 + +#define BME680_REG_CTRL_GAS_1 0x71 +#define BME680_RUN_GAS_MASK BIT(4) +#define BME680_NB_CONV_MASK GENMASK(3, 0) + +#define BME680_REG_MEAS_STAT_0 0x1D +#define BME680_GAS_MEAS_BIT BIT(6) + +/* Calibration Parameters */ +#define BME680_T2_LSB_REG 0x8A +#define BME680_T3_REG 0x8C +#define BME680_P1_LSB_REG 0x8E +#define BME680_P2_LSB_REG 0x90 +#define BME680_P3_REG 0x92 +#define BME680_P4_LSB_REG 0x94 +#define BME680_P5_LSB_REG 0x96 +#define BME680_P7_REG 0x98 +#define BME680_P6_REG 0x99 +#define BME680_P8_LSB_REG 0x9C +#define BME680_P9_LSB_REG 0x9E +#define BME680_P10_REG 0xA0 +#define BME680_H2_LSB_REG 0xE2 +#define BME680_H2_MSB_REG 0xE1 +#define BME680_H1_MSB_REG 0xE3 +#define BME680_H1_LSB_REG 0xE2 +#define BME680_H3_REG 0xE4 +#define BME680_H4_REG 0xE5 +#define BME680_H5_REG 0xE6 +#define BME680_H6_REG 0xE7 +#define BME680_H7_REG 0xE8 +#define BME680_T1_LSB_REG 0xE9 +#define BME680_GH2_LSB_REG 0xEB +#define BME680_GH1_REG 0xED +#define BME680_GH3_REG 0xEE + +extern const struct regmap_config bme680_regmap_config; + +int bme680_core_probe(struct device *dev, struct regmap *regmap, + const char *name); + +#endif /* BME680_H_ */ diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c new file mode 100644 index 000000000..ef5e0e46f --- /dev/null +++ b/drivers/iio/chemical/bme680_core.c @@ -0,0 +1,964 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Bosch BME680 - Temperature, Pressure, Humidity & Gas Sensor + * + * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH + * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com> + * + * Datasheet: + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf + */ +#include <linux/acpi.h> +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/log2.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#include "bme680.h" + +struct bme680_calib { + u16 par_t1; + s16 par_t2; + s8 par_t3; + u16 par_p1; + s16 par_p2; + s8 par_p3; + s16 par_p4; + s16 par_p5; + s8 par_p6; + s8 par_p7; + s16 par_p8; + s16 par_p9; + u8 par_p10; + u16 par_h1; + u16 par_h2; + s8 par_h3; + s8 par_h4; + s8 par_h5; + s8 par_h6; + s8 par_h7; + s8 par_gh1; + s16 par_gh2; + s8 par_gh3; + u8 res_heat_range; + s8 res_heat_val; + s8 range_sw_err; +}; + +struct bme680_data { + struct regmap *regmap; + struct bme680_calib bme680; + u8 oversampling_temp; + u8 oversampling_press; + u8 oversampling_humid; + u16 heater_dur; + u16 heater_temp; + /* + * Carryover value from temperature conversion, used in pressure + * and humidity compensation calculations. + */ + s32 t_fine; +}; + +static const struct regmap_range bme680_volatile_ranges[] = { + regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB), + regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS), + regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG), +}; + +static const struct regmap_access_table bme680_volatile_table = { + .yes_ranges = bme680_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(bme680_volatile_ranges), +}; + +const struct regmap_config bme680_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xef, + .volatile_table = &bme680_volatile_table, + .cache_type = REGCACHE_RBTREE, +}; +EXPORT_SYMBOL_NS(bme680_regmap_config, IIO_BME680); + +static const struct iio_chan_spec bme680_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, +}; + +static int bme680_read_calib(struct bme680_data *data, + struct bme680_calib *calib) +{ + struct device *dev = regmap_get_device(data->regmap); + unsigned int tmp, tmp_msb, tmp_lsb; + int ret; + __le16 buf; + + /* Temperature related coefficients */ + ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_T1_LSB_REG\n"); + return ret; + } + calib->par_t1 = le16_to_cpu(buf); + + ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_T2_LSB_REG\n"); + return ret; + } + calib->par_t2 = le16_to_cpu(buf); + + ret = regmap_read(data->regmap, BME680_T3_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_T3_REG\n"); + return ret; + } + calib->par_t3 = tmp; + + /* Pressure related coefficients */ + ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P1_LSB_REG\n"); + return ret; + } + calib->par_p1 = le16_to_cpu(buf); + + ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P2_LSB_REG\n"); + return ret; + } + calib->par_p2 = le16_to_cpu(buf); + + ret = regmap_read(data->regmap, BME680_P3_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P3_REG\n"); + return ret; + } + calib->par_p3 = tmp; + + ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P4_LSB_REG\n"); + return ret; + } + calib->par_p4 = le16_to_cpu(buf); + + ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P5_LSB_REG\n"); + return ret; + } + calib->par_p5 = le16_to_cpu(buf); + + ret = regmap_read(data->regmap, BME680_P6_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P6_REG\n"); + return ret; + } + calib->par_p6 = tmp; + + ret = regmap_read(data->regmap, BME680_P7_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P7_REG\n"); + return ret; + } + calib->par_p7 = tmp; + + ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P8_LSB_REG\n"); + return ret; + } + calib->par_p8 = le16_to_cpu(buf); + + ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P9_LSB_REG\n"); + return ret; + } + calib->par_p9 = le16_to_cpu(buf); + + ret = regmap_read(data->regmap, BME680_P10_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_P10_REG\n"); + return ret; + } + calib->par_p10 = tmp; + + /* Humidity related coefficients */ + ret = regmap_read(data->regmap, BME680_H1_MSB_REG, &tmp_msb); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H1_MSB_REG\n"); + return ret; + } + ret = regmap_read(data->regmap, BME680_H1_LSB_REG, &tmp_lsb); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H1_LSB_REG\n"); + return ret; + } + calib->par_h1 = (tmp_msb << BME680_HUM_REG_SHIFT_VAL) | + (tmp_lsb & BME680_BIT_H1_DATA_MASK); + + ret = regmap_read(data->regmap, BME680_H2_MSB_REG, &tmp_msb); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H2_MSB_REG\n"); + return ret; + } + ret = regmap_read(data->regmap, BME680_H2_LSB_REG, &tmp_lsb); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H2_LSB_REG\n"); + return ret; + } + calib->par_h2 = (tmp_msb << BME680_HUM_REG_SHIFT_VAL) | + (tmp_lsb >> BME680_HUM_REG_SHIFT_VAL); + + ret = regmap_read(data->regmap, BME680_H3_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H3_REG\n"); + return ret; + } + calib->par_h3 = tmp; + + ret = regmap_read(data->regmap, BME680_H4_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H4_REG\n"); + return ret; + } + calib->par_h4 = tmp; + + ret = regmap_read(data->regmap, BME680_H5_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H5_REG\n"); + return ret; + } + calib->par_h5 = tmp; + + ret = regmap_read(data->regmap, BME680_H6_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H6_REG\n"); + return ret; + } + calib->par_h6 = tmp; + + ret = regmap_read(data->regmap, BME680_H7_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_H7_REG\n"); + return ret; + } + calib->par_h7 = tmp; + + /* Gas heater related coefficients */ + ret = regmap_read(data->regmap, BME680_GH1_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_GH1_REG\n"); + return ret; + } + calib->par_gh1 = tmp; + + ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG, + &buf, sizeof(buf)); + if (ret < 0) { + dev_err(dev, "failed to read BME680_GH2_LSB_REG\n"); + return ret; + } + calib->par_gh2 = le16_to_cpu(buf); + + ret = regmap_read(data->regmap, BME680_GH3_REG, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read BME680_GH3_REG\n"); + return ret; + } + calib->par_gh3 = tmp; + + /* Other coefficients */ + ret = regmap_read(data->regmap, BME680_REG_RES_HEAT_RANGE, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read resistance heat range\n"); + return ret; + } + calib->res_heat_range = FIELD_GET(BME680_RHRANGE_MASK, tmp); + + ret = regmap_read(data->regmap, BME680_REG_RES_HEAT_VAL, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read resistance heat value\n"); + return ret; + } + calib->res_heat_val = tmp; + + ret = regmap_read(data->regmap, BME680_REG_RANGE_SW_ERR, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read range software error\n"); + return ret; + } + calib->range_sw_err = FIELD_GET(BME680_RSERROR_MASK, tmp); + + return 0; +} + +/* + * Taken from Bosch BME680 API: + * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L876 + * + * Returns temperature measurement in DegC, resolutions is 0.01 DegC. Therefore, + * output value of "3233" represents 32.33 DegC. + */ +static s16 bme680_compensate_temp(struct bme680_data *data, + s32 adc_temp) +{ + struct bme680_calib *calib = &data->bme680; + s64 var1, var2, var3; + s16 calc_temp; + + /* If the calibration is invalid, attempt to reload it */ + if (!calib->par_t2) + bme680_read_calib(data, calib); + + var1 = (adc_temp >> 3) - (calib->par_t1 << 1); + var2 = (var1 * calib->par_t2) >> 11; + var3 = ((var1 >> 1) * (var1 >> 1)) >> 12; + var3 = (var3 * (calib->par_t3 << 4)) >> 14; + data->t_fine = var2 + var3; + calc_temp = (data->t_fine * 5 + 128) >> 8; + + return calc_temp; +} + +/* + * Taken from Bosch BME680 API: + * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L896 + * + * Returns pressure measurement in Pa. Output value of "97356" represents + * 97356 Pa = 973.56 hPa. + */ +static u32 bme680_compensate_press(struct bme680_data *data, + u32 adc_press) +{ + struct bme680_calib *calib = &data->bme680; + s32 var1, var2, var3, press_comp; + + var1 = (data->t_fine >> 1) - 64000; + var2 = ((((var1 >> 2) * (var1 >> 2)) >> 11) * calib->par_p6) >> 2; + var2 = var2 + (var1 * calib->par_p5 << 1); + var2 = (var2 >> 2) + (calib->par_p4 << 16); + var1 = (((((var1 >> 2) * (var1 >> 2)) >> 13) * + (calib->par_p3 << 5)) >> 3) + + ((calib->par_p2 * var1) >> 1); + var1 = var1 >> 18; + var1 = ((32768 + var1) * calib->par_p1) >> 15; + press_comp = 1048576 - adc_press; + press_comp = ((press_comp - (var2 >> 12)) * 3125); + + if (press_comp >= BME680_MAX_OVERFLOW_VAL) + press_comp = ((press_comp / (u32)var1) << 1); + else + press_comp = ((press_comp << 1) / (u32)var1); + + var1 = (calib->par_p9 * (((press_comp >> 3) * + (press_comp >> 3)) >> 13)) >> 12; + var2 = ((press_comp >> 2) * calib->par_p8) >> 13; + var3 = ((press_comp >> 8) * (press_comp >> 8) * + (press_comp >> 8) * calib->par_p10) >> 17; + + press_comp += (var1 + var2 + var3 + (calib->par_p7 << 7)) >> 4; + + return press_comp; +} + +/* + * Taken from Bosch BME680 API: + * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L937 + * + * Returns humidity measurement in percent, resolution is 0.001 percent. Output + * value of "43215" represents 43.215 %rH. + */ +static u32 bme680_compensate_humid(struct bme680_data *data, + u16 adc_humid) +{ + struct bme680_calib *calib = &data->bme680; + s32 var1, var2, var3, var4, var5, var6, temp_scaled, calc_hum; + + temp_scaled = (data->t_fine * 5 + 128) >> 8; + var1 = (adc_humid - ((s32) ((s32) calib->par_h1 * 16))) - + (((temp_scaled * (s32) calib->par_h3) / 100) >> 1); + var2 = ((s32) calib->par_h2 * + (((temp_scaled * calib->par_h4) / 100) + + (((temp_scaled * ((temp_scaled * calib->par_h5) / 100)) + >> 6) / 100) + (1 << 14))) >> 10; + var3 = var1 * var2; + var4 = calib->par_h6 << 7; + var4 = (var4 + ((temp_scaled * calib->par_h7) / 100)) >> 4; + var5 = ((var3 >> 14) * (var3 >> 14)) >> 10; + var6 = (var4 * var5) >> 1; + calc_hum = (((var3 + var6) >> 10) * 1000) >> 12; + + calc_hum = clamp(calc_hum, 0, 100000); /* clamp between 0-100 %rH */ + + return calc_hum; +} + +/* + * Taken from Bosch BME680 API: + * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L973 + * + * Returns gas measurement in Ohm. Output value of "82986" represent 82986 ohms. + */ +static u32 bme680_compensate_gas(struct bme680_data *data, u16 gas_res_adc, + u8 gas_range) +{ + struct bme680_calib *calib = &data->bme680; + s64 var1; + u64 var2; + s64 var3; + u32 calc_gas_res; + + /* Look up table for the possible gas range values */ + const u32 lookupTable[16] = {2147483647u, 2147483647u, + 2147483647u, 2147483647u, 2147483647u, + 2126008810u, 2147483647u, 2130303777u, + 2147483647u, 2147483647u, 2143188679u, + 2136746228u, 2147483647u, 2126008810u, + 2147483647u, 2147483647u}; + + var1 = ((1340 + (5 * (s64) calib->range_sw_err)) * + ((s64) lookupTable[gas_range])) >> 16; + var2 = ((gas_res_adc << 15) - 16777216) + var1; + var3 = ((125000 << (15 - gas_range)) * var1) >> 9; + var3 += (var2 >> 1); + calc_gas_res = div64_s64(var3, (s64) var2); + + return calc_gas_res; +} + +/* + * Taken from Bosch BME680 API: + * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L1002 + */ +static u8 bme680_calc_heater_res(struct bme680_data *data, u16 temp) +{ + struct bme680_calib *calib = &data->bme680; + s32 var1, var2, var3, var4, var5, heatr_res_x100; + u8 heatr_res; + + if (temp > 400) /* Cap temperature */ + temp = 400; + + var1 = (((s32) BME680_AMB_TEMP * calib->par_gh3) / 1000) * 256; + var2 = (calib->par_gh1 + 784) * (((((calib->par_gh2 + 154009) * + temp * 5) / 100) + + 3276800) / 10); + var3 = var1 + (var2 / 2); + var4 = (var3 / (calib->res_heat_range + 4)); + var5 = 131 * calib->res_heat_val + 65536; + heatr_res_x100 = ((var4 / var5) - 250) * 34; + heatr_res = DIV_ROUND_CLOSEST(heatr_res_x100, 100); + + return heatr_res; +} + +/* + * Taken from Bosch BME680 API: + * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L1188 + */ +static u8 bme680_calc_heater_dur(u16 dur) +{ + u8 durval, factor = 0; + + if (dur >= 0xfc0) { + durval = 0xff; /* Max duration */ + } else { + while (dur > 0x3F) { + dur = dur / 4; + factor += 1; + } + durval = dur + (factor * 64); + } + + return durval; +} + +static int bme680_set_mode(struct bme680_data *data, bool mode) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + + if (mode) { + ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS, + BME680_MODE_MASK, BME680_MODE_FORCED); + if (ret < 0) + dev_err(dev, "failed to set forced mode\n"); + + } else { + ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS, + BME680_MODE_MASK, BME680_MODE_SLEEP); + if (ret < 0) + dev_err(dev, "failed to set sleep mode\n"); + + } + + return ret; +} + +static u8 bme680_oversampling_to_reg(u8 val) +{ + return ilog2(val) + 1; +} + +static int bme680_chip_config(struct bme680_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + u8 osrs; + + osrs = FIELD_PREP( + BME680_OSRS_HUMIDITY_MASK, + bme680_oversampling_to_reg(data->oversampling_humid)); + /* + * Highly recommended to set oversampling of humidity before + * temperature/pressure oversampling. + */ + ret = regmap_update_bits(data->regmap, BME680_REG_CTRL_HUMIDITY, + BME680_OSRS_HUMIDITY_MASK, osrs); + if (ret < 0) { + dev_err(dev, "failed to write ctrl_hum register\n"); + return ret; + } + + /* IIR filter settings */ + ret = regmap_update_bits(data->regmap, BME680_REG_CONFIG, + BME680_FILTER_MASK, + BME680_FILTER_COEFF_VAL); + if (ret < 0) { + dev_err(dev, "failed to write config register\n"); + return ret; + } + + osrs = FIELD_PREP(BME680_OSRS_TEMP_MASK, + bme680_oversampling_to_reg(data->oversampling_temp)) | + FIELD_PREP(BME680_OSRS_PRESS_MASK, + bme680_oversampling_to_reg(data->oversampling_press)); + ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS, + BME680_OSRS_TEMP_MASK | BME680_OSRS_PRESS_MASK, + osrs); + if (ret < 0) + dev_err(dev, "failed to write ctrl_meas register\n"); + + return ret; +} + +static int bme680_gas_config(struct bme680_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + u8 heatr_res, heatr_dur; + + heatr_res = bme680_calc_heater_res(data, data->heater_temp); + + /* set target heater temperature */ + ret = regmap_write(data->regmap, BME680_REG_RES_HEAT_0, heatr_res); + if (ret < 0) { + dev_err(dev, "failed to write res_heat_0 register\n"); + return ret; + } + + heatr_dur = bme680_calc_heater_dur(data->heater_dur); + + /* set target heating duration */ + ret = regmap_write(data->regmap, BME680_REG_GAS_WAIT_0, heatr_dur); + if (ret < 0) { + dev_err(dev, "failed to write gas_wait_0 register\n"); + return ret; + } + + /* Enable the gas sensor and select heater profile set-point 0 */ + ret = regmap_update_bits(data->regmap, BME680_REG_CTRL_GAS_1, + BME680_RUN_GAS_MASK | BME680_NB_CONV_MASK, + FIELD_PREP(BME680_RUN_GAS_MASK, 1) | + FIELD_PREP(BME680_NB_CONV_MASK, 0)); + if (ret < 0) + dev_err(dev, "failed to write ctrl_gas_1 register\n"); + + return ret; +} + +static int bme680_read_temp(struct bme680_data *data, int *val) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + __be32 tmp = 0; + s32 adc_temp; + s16 comp_temp; + + /* set forced mode to trigger measurement */ + ret = bme680_set_mode(data, true); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB, + &tmp, 3); + if (ret < 0) { + dev_err(dev, "failed to read temperature\n"); + return ret; + } + + adc_temp = be32_to_cpu(tmp) >> 12; + if (adc_temp == BME680_MEAS_SKIPPED) { + /* reading was skipped */ + dev_err(dev, "reading temperature skipped\n"); + return -EINVAL; + } + comp_temp = bme680_compensate_temp(data, adc_temp); + /* + * val might be NULL if we're called by the read_press/read_humid + * routine which is called to get t_fine value used in + * compensate_press/compensate_humid to get compensated + * pressure/humidity readings. + */ + if (val) { + *val = comp_temp * 10; /* Centidegrees to millidegrees */ + return IIO_VAL_INT; + } + + return ret; +} + +static int bme680_read_press(struct bme680_data *data, + int *val, int *val2) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + __be32 tmp = 0; + s32 adc_press; + + /* Read and compensate temperature to get a reading of t_fine */ + ret = bme680_read_temp(data, NULL); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB, + &tmp, 3); + if (ret < 0) { + dev_err(dev, "failed to read pressure\n"); + return ret; + } + + adc_press = be32_to_cpu(tmp) >> 12; + if (adc_press == BME680_MEAS_SKIPPED) { + /* reading was skipped */ + dev_err(dev, "reading pressure skipped\n"); + return -EINVAL; + } + + *val = bme680_compensate_press(data, adc_press); + *val2 = 100; + return IIO_VAL_FRACTIONAL; +} + +static int bme680_read_humid(struct bme680_data *data, + int *val, int *val2) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + __be16 tmp = 0; + s32 adc_humidity; + u32 comp_humidity; + + /* Read and compensate temperature to get a reading of t_fine */ + ret = bme680_read_temp(data, NULL); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, BM6880_REG_HUMIDITY_MSB, + &tmp, sizeof(tmp)); + if (ret < 0) { + dev_err(dev, "failed to read humidity\n"); + return ret; + } + + adc_humidity = be16_to_cpu(tmp); + if (adc_humidity == BME680_MEAS_SKIPPED) { + /* reading was skipped */ + dev_err(dev, "reading humidity skipped\n"); + return -EINVAL; + } + comp_humidity = bme680_compensate_humid(data, adc_humidity); + + *val = comp_humidity; + *val2 = 1000; + return IIO_VAL_FRACTIONAL; +} + +static int bme680_read_gas(struct bme680_data *data, + int *val) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + __be16 tmp = 0; + unsigned int check; + u16 adc_gas_res; + u8 gas_range; + + /* Set heater settings */ + ret = bme680_gas_config(data); + if (ret < 0) { + dev_err(dev, "failed to set gas config\n"); + return ret; + } + + /* set forced mode to trigger measurement */ + ret = bme680_set_mode(data, true); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check); + if (check & BME680_GAS_MEAS_BIT) { + dev_err(dev, "gas measurement incomplete\n"); + return -EBUSY; + } + + ret = regmap_read(data->regmap, BME680_REG_GAS_R_LSB, &check); + if (ret < 0) { + dev_err(dev, "failed to read gas_r_lsb register\n"); + return ret; + } + + /* + * occurs if either the gas heating duration was insuffient + * to reach the target heater temperature or the target + * heater temperature was too high for the heater sink to + * reach. + */ + if ((check & BME680_GAS_STAB_BIT) == 0) { + dev_err(dev, "heater failed to reach the target temperature\n"); + return -EINVAL; + } + + ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB, + &tmp, sizeof(tmp)); + if (ret < 0) { + dev_err(dev, "failed to read gas resistance\n"); + return ret; + } + + gas_range = check & BME680_GAS_RANGE_MASK; + adc_gas_res = be16_to_cpu(tmp) >> BME680_ADC_GAS_RES_SHIFT; + + *val = bme680_compensate_gas(data, adc_gas_res, gas_range); + return IIO_VAL_INT; +} + +static int bme680_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bme680_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_TEMP: + return bme680_read_temp(data, val); + case IIO_PRESSURE: + return bme680_read_press(data, val, val2); + case IIO_HUMIDITYRELATIVE: + return bme680_read_humid(data, val, val2); + case IIO_RESISTANCE: + return bme680_read_gas(data, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->type) { + case IIO_TEMP: + *val = data->oversampling_temp; + return IIO_VAL_INT; + case IIO_PRESSURE: + *val = data->oversampling_press; + return IIO_VAL_INT; + case IIO_HUMIDITYRELATIVE: + *val = data->oversampling_humid; + return IIO_VAL_INT; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static bool bme680_is_valid_oversampling(int rate) +{ + return (rate > 0 && rate <= 16 && is_power_of_2(rate)); +} + +static int bme680_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bme680_data *data = iio_priv(indio_dev); + + if (val2 != 0) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + { + if (!bme680_is_valid_oversampling(val)) + return -EINVAL; + + switch (chan->type) { + case IIO_TEMP: + data->oversampling_temp = val; + break; + case IIO_PRESSURE: + data->oversampling_press = val; + break; + case IIO_HUMIDITYRELATIVE: + data->oversampling_humid = val; + break; + default: + return -EINVAL; + } + + return bme680_chip_config(data); + } + default: + return -EINVAL; + } +} + +static const char bme680_oversampling_ratio_show[] = "1 2 4 8 16"; + +static IIO_CONST_ATTR(oversampling_ratio_available, + bme680_oversampling_ratio_show); + +static struct attribute *bme680_attributes[] = { + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bme680_attribute_group = { + .attrs = bme680_attributes, +}; + +static const struct iio_info bme680_info = { + .read_raw = &bme680_read_raw, + .write_raw = &bme680_write_raw, + .attrs = &bme680_attribute_group, +}; + +static const char *bme680_match_acpi_device(struct device *dev) +{ + const struct acpi_device_id *id; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return NULL; + + return dev_name(dev); +} + +int bme680_core_probe(struct device *dev, struct regmap *regmap, + const char *name) +{ + struct iio_dev *indio_dev; + struct bme680_data *data; + unsigned int val; + int ret; + + ret = regmap_write(regmap, BME680_REG_SOFT_RESET, + BME680_CMD_SOFTRESET); + if (ret < 0) { + dev_err(dev, "Failed to reset chip\n"); + return ret; + } + + ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val); + if (ret < 0) { + dev_err(dev, "Error reading chip ID\n"); + return ret; + } + + if (val != BME680_CHIP_ID_VAL) { + dev_err(dev, "Wrong chip ID, got %x expected %x\n", + val, BME680_CHIP_ID_VAL); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + if (!name && ACPI_HANDLE(dev)) + name = bme680_match_acpi_device(dev); + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + indio_dev->name = name; + indio_dev->channels = bme680_channels; + indio_dev->num_channels = ARRAY_SIZE(bme680_channels); + indio_dev->info = &bme680_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + /* default values for the sensor */ + data->oversampling_humid = 2; /* 2X oversampling rate */ + data->oversampling_press = 4; /* 4X oversampling rate */ + data->oversampling_temp = 8; /* 8X oversampling rate */ + data->heater_temp = 320; /* degree Celsius */ + data->heater_dur = 150; /* milliseconds */ + + ret = bme680_chip_config(data); + if (ret < 0) { + dev_err(dev, "failed to set chip_config data\n"); + return ret; + } + + ret = bme680_gas_config(data); + if (ret < 0) { + dev_err(dev, "failed to set gas config data\n"); + return ret; + } + + ret = bme680_read_calib(data, &data->bme680); + if (ret < 0) { + dev_err(dev, + "failed to read calibration coefficients at probe\n"); + return ret; + } + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS_GPL(bme680_core_probe, IIO_BME680); + +MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>"); +MODULE_DESCRIPTION("Bosch BME680 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c new file mode 100644 index 000000000..20f2c20b6 --- /dev/null +++ b/drivers/iio/chemical/bme680_i2c.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * BME680 - I2C Driver + * + * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com> + * + * 7-Bit I2C slave address is: + * - 0x76 if SDO is pulled to GND + * - 0x77 if SDO is pulled to VDDIO + * + * Note: SDO pin cannot be left floating otherwise I2C address + * will be undefined. + */ +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "bme680.h" + +static int bme680_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(client, &bme680_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bme680_core_probe(&client->dev, regmap, name); +} + +static const struct i2c_device_id bme680_i2c_id[] = { + {"bme680", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, bme680_i2c_id); + +static const struct of_device_id bme680_of_i2c_match[] = { + { .compatible = "bosch,bme680", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bme680_of_i2c_match); + +static struct i2c_driver bme680_i2c_driver = { + .driver = { + .name = "bme680_i2c", + .of_match_table = bme680_of_i2c_match, + }, + .probe = bme680_i2c_probe, + .id_table = bme680_i2c_id, +}; +module_i2c_driver(bme680_i2c_driver); + +MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>"); +MODULE_DESCRIPTION("BME680 I2C driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_BME680); diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c new file mode 100644 index 000000000..4404d42ae --- /dev/null +++ b/drivers/iio/chemical/bme680_spi.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * BME680 - SPI Driver + * + * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com> + */ +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include "bme680.h" + +struct bme680_spi_bus_context { + struct spi_device *spi; + u8 current_page; +}; + +/* + * In SPI mode there are only 7 address bits, a "page" register determines + * which part of the 8-bit range is active. This function looks at the address + * and writes the page selection bit if needed + */ +static int bme680_regmap_spi_select_page( + struct bme680_spi_bus_context *ctx, u8 reg) +{ + struct spi_device *spi = ctx->spi; + int ret; + u8 buf[2]; + u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */ + + if (page == ctx->current_page) + return 0; + + /* + * Data sheet claims we're only allowed to change bit 4, so we must do + * a read-modify-write on each and every page select + */ + buf[0] = BME680_REG_STATUS; + ret = spi_write_then_read(spi, buf, 1, buf + 1, 1); + if (ret < 0) { + dev_err(&spi->dev, "failed to set page %u\n", page); + return ret; + } + + buf[0] = BME680_REG_STATUS; + if (page) + buf[1] |= BME680_SPI_MEM_PAGE_BIT; + else + buf[1] &= ~BME680_SPI_MEM_PAGE_BIT; + + ret = spi_write(spi, buf, 2); + if (ret < 0) { + dev_err(&spi->dev, "failed to set page %u\n", page); + return ret; + } + + ctx->current_page = page; + + return 0; +} + +static int bme680_regmap_spi_write(void *context, const void *data, + size_t count) +{ + struct bme680_spi_bus_context *ctx = context; + struct spi_device *spi = ctx->spi; + int ret; + u8 buf[2]; + + memcpy(buf, data, 2); + + ret = bme680_regmap_spi_select_page(ctx, buf[0]); + if (ret) + return ret; + + /* + * The SPI register address (= full register address without bit 7) + * and the write command (bit7 = RW = '0') + */ + buf[0] &= ~0x80; + + return spi_write(spi, buf, 2); +} + +static int bme680_regmap_spi_read(void *context, const void *reg, + size_t reg_size, void *val, size_t val_size) +{ + struct bme680_spi_bus_context *ctx = context; + struct spi_device *spi = ctx->spi; + int ret; + u8 addr = *(const u8 *)reg; + + ret = bme680_regmap_spi_select_page(ctx, addr); + if (ret) + return ret; + + addr |= 0x80; /* bit7 = RW = '1' */ + + return spi_write_then_read(spi, &addr, 1, val, val_size); +} + +static struct regmap_bus bme680_regmap_bus = { + .write = bme680_regmap_spi_write, + .read = bme680_regmap_spi_read, + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static int bme680_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct bme680_spi_bus_context *bus_context; + struct regmap *regmap; + int ret; + + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi_setup failed!\n"); + return ret; + } + + bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL); + if (!bus_context) + return -ENOMEM; + + bus_context->spi = spi; + bus_context->current_page = 0xff; /* Undefined on warm boot */ + + regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus, + bus_context, &bme680_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %ld\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return bme680_core_probe(&spi->dev, regmap, id->name); +} + +static const struct spi_device_id bme680_spi_id[] = { + {"bme680", 0}, + {}, +}; +MODULE_DEVICE_TABLE(spi, bme680_spi_id); + +static const struct of_device_id bme680_of_spi_match[] = { + { .compatible = "bosch,bme680", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bme680_of_spi_match); + +static struct spi_driver bme680_spi_driver = { + .driver = { + .name = "bme680_spi", + .of_match_table = bme680_of_spi_match, + }, + .probe = bme680_spi_probe, + .id_table = bme680_spi_id, +}; +module_spi_driver(bme680_spi_driver); + +MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>"); +MODULE_DESCRIPTION("Bosch BME680 SPI driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_BME680); diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c new file mode 100644 index 000000000..ba4045e20 --- /dev/null +++ b/drivers/iio/chemical/ccs811.c @@ -0,0 +1,578 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ccs811.c - Support for AMS CCS811 VOC Sensor + * + * Copyright (C) 2017 Narcisa Vasile <narcisaanamaria12@gmail.com> + * + * Datasheet: ams.com/content/download/951091/2269479/CCS811_DS000459_3-00.pdf + * + * IIO driver for AMS CCS811 (I2C address 0x5A/0x5B set by ADDR Low/High) + * + * TODO: + * 1. Make the drive mode selectable form userspace + * 2. Add support for interrupts + * 3. Adjust time to wait for data to be ready based on selected operation mode + * 4. Read error register and put the information in logs + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/module.h> + +#define CCS811_STATUS 0x00 +#define CCS811_MEAS_MODE 0x01 +#define CCS811_ALG_RESULT_DATA 0x02 +#define CCS811_RAW_DATA 0x03 +#define CCS811_HW_ID 0x20 +#define CCS811_HW_ID_VALUE 0x81 +#define CCS811_HW_VERSION 0x21 +#define CCS811_HW_VERSION_VALUE 0x10 +#define CCS811_HW_VERSION_MASK 0xF0 +#define CCS811_ERR 0xE0 +/* Used to transition from boot to application mode */ +#define CCS811_APP_START 0xF4 +#define CCS811_SW_RESET 0xFF + +/* Status register flags */ +#define CCS811_STATUS_ERROR BIT(0) +#define CCS811_STATUS_DATA_READY BIT(3) +#define CCS811_STATUS_APP_VALID_MASK BIT(4) +#define CCS811_STATUS_APP_VALID_LOADED BIT(4) +/* + * Value of FW_MODE bit of STATUS register describes the sensor's state: + * 0: Firmware is in boot mode, this allows new firmware to be loaded + * 1: Firmware is in application mode. CCS811 is ready to take ADC measurements + */ +#define CCS811_STATUS_FW_MODE_MASK BIT(7) +#define CCS811_STATUS_FW_MODE_APPLICATION BIT(7) + +/* Measurement modes */ +#define CCS811_MODE_IDLE 0x00 +#define CCS811_MODE_IAQ_1SEC 0x10 +#define CCS811_MODE_IAQ_10SEC 0x20 +#define CCS811_MODE_IAQ_60SEC 0x30 +#define CCS811_MODE_RAW_DATA 0x40 + +#define CCS811_MEAS_MODE_INTERRUPT BIT(3) + +#define CCS811_VOLTAGE_MASK 0x3FF + +struct ccs811_reading { + __be16 co2; + __be16 voc; + u8 status; + u8 error; + __be16 raw_data; +} __attribute__((__packed__)); + +struct ccs811_data { + struct i2c_client *client; + struct mutex lock; /* Protect readings */ + struct ccs811_reading buffer; + struct iio_trigger *drdy_trig; + struct gpio_desc *wakeup_gpio; + bool drdy_trig_on; + /* Ensures correct alignment of timestamp if present */ + struct { + s16 channels[2]; + s64 ts __aligned(8); + } scan; +}; + +static const struct iio_chan_spec ccs811_channels[] = { + { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = -1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = -1, + }, { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +/* + * The CCS811 powers-up in boot mode. A setup write to CCS811_APP_START will + * transition the sensor to application mode. + */ +static int ccs811_start_sensor_application(struct i2c_client *client) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, CCS811_STATUS); + if (ret < 0) + return ret; + + if ((ret & CCS811_STATUS_FW_MODE_APPLICATION)) + return 0; + + if ((ret & CCS811_STATUS_APP_VALID_MASK) != + CCS811_STATUS_APP_VALID_LOADED) + return -EIO; + + ret = i2c_smbus_write_byte(client, CCS811_APP_START); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(client, CCS811_STATUS); + if (ret < 0) + return ret; + + if ((ret & CCS811_STATUS_FW_MODE_MASK) != + CCS811_STATUS_FW_MODE_APPLICATION) { + dev_err(&client->dev, "Application failed to start. Sensor is still in boot mode.\n"); + return -EIO; + } + + return 0; +} + +static int ccs811_setup(struct i2c_client *client) +{ + int ret; + + ret = ccs811_start_sensor_application(client); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE, + CCS811_MODE_IAQ_1SEC); +} + +static void ccs811_set_wakeup(struct ccs811_data *data, bool enable) +{ + if (!data->wakeup_gpio) + return; + + gpiod_set_value(data->wakeup_gpio, enable); + + if (enable) + usleep_range(50, 60); + else + usleep_range(20, 30); +} + +static int ccs811_get_measurement(struct ccs811_data *data) +{ + int ret, tries = 11; + + ccs811_set_wakeup(data, true); + + /* Maximum waiting time: 1s, as measurements are made every second */ + while (tries-- > 0) { + ret = i2c_smbus_read_byte_data(data->client, CCS811_STATUS); + if (ret < 0) + return ret; + + if ((ret & CCS811_STATUS_DATA_READY) || tries == 0) + break; + msleep(100); + } + if (!(ret & CCS811_STATUS_DATA_READY)) + return -EIO; + + ret = i2c_smbus_read_i2c_block_data(data->client, + CCS811_ALG_RESULT_DATA, 8, + (char *)&data->buffer); + ccs811_set_wakeup(data, false); + + return ret; +} + +static int ccs811_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ccs811_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&data->lock); + ret = ccs811_get_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); + return ret; + } + + switch (chan->type) { + case IIO_VOLTAGE: + *val = be16_to_cpu(data->buffer.raw_data) & + CCS811_VOLTAGE_MASK; + ret = IIO_VAL_INT; + break; + case IIO_CURRENT: + *val = be16_to_cpu(data->buffer.raw_data) >> 10; + ret = IIO_VAL_INT; + break; + case IIO_CONCENTRATION: + switch (chan->channel2) { + case IIO_MOD_CO2: + *val = be16_to_cpu(data->buffer.co2); + ret = IIO_VAL_INT; + break; + case IIO_MOD_VOC: + *val = be16_to_cpu(data->buffer.voc); + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + } + break; + default: + ret = -EINVAL; + } + mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); + + return ret; + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + *val = 1; + *val2 = 612903; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CURRENT: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CONCENTRATION: + switch (chan->channel2) { + case IIO_MOD_CO2: + *val = 0; + *val2 = 100; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_MOD_VOC: + *val = 0; + *val2 = 100; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_info ccs811_info = { + .read_raw = ccs811_read_raw, +}; + +static int ccs811_set_trigger_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct ccs811_data *data = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(data->client, CCS811_MEAS_MODE); + if (ret < 0) + return ret; + + if (state) + ret |= CCS811_MEAS_MODE_INTERRUPT; + else + ret &= ~CCS811_MEAS_MODE_INTERRUPT; + + data->drdy_trig_on = state; + + return i2c_smbus_write_byte_data(data->client, CCS811_MEAS_MODE, ret); +} + +static const struct iio_trigger_ops ccs811_trigger_ops = { + .set_trigger_state = ccs811_set_trigger_state, +}; + +static irqreturn_t ccs811_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ccs811_data *data = iio_priv(indio_dev); + struct i2c_client *client = data->client; + int ret; + + ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA, + sizeof(data->scan.channels), + (u8 *)data->scan.channels); + if (ret != 4) { + dev_err(&client->dev, "cannot read sensor data\n"); + goto err; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t ccs811_data_rdy_trigger_poll(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct ccs811_data *data = iio_priv(indio_dev); + + if (data->drdy_trig_on) + iio_trigger_poll(data->drdy_trig); + + return IRQ_HANDLED; +} + +static int ccs811_reset(struct i2c_client *client) +{ + struct gpio_desc *reset_gpio; + int ret; + + reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) + return PTR_ERR(reset_gpio); + + /* Try to reset using nRESET pin if available else do SW reset */ + if (reset_gpio) { + gpiod_set_value(reset_gpio, 1); + usleep_range(20, 30); + gpiod_set_value(reset_gpio, 0); + } else { + /* + * As per the datasheet, this sequence of values needs to be + * written to the SW_RESET register for triggering the soft + * reset in the device and placing it in boot mode. + */ + static const u8 reset_seq[] = { + 0x11, 0xE5, 0x72, 0x8A, + }; + + ret = i2c_smbus_write_i2c_block_data(client, CCS811_SW_RESET, + sizeof(reset_seq), reset_seq); + if (ret < 0) { + dev_err(&client->dev, "Failed to reset sensor\n"); + return ret; + } + } + + /* tSTART delay required after reset */ + usleep_range(1000, 2000); + + return 0; +} + +static int ccs811_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ccs811_data *data; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + data->wakeup_gpio = devm_gpiod_get_optional(&client->dev, "wakeup", + GPIOD_OUT_HIGH); + if (IS_ERR(data->wakeup_gpio)) + return PTR_ERR(data->wakeup_gpio); + + ccs811_set_wakeup(data, true); + + ret = ccs811_reset(client); + if (ret) { + ccs811_set_wakeup(data, false); + return ret; + } + + /* Check hardware id (should be 0x81 for this family of devices) */ + ret = i2c_smbus_read_byte_data(client, CCS811_HW_ID); + if (ret < 0) { + ccs811_set_wakeup(data, false); + return ret; + } + + if (ret != CCS811_HW_ID_VALUE) { + dev_err(&client->dev, "hardware id doesn't match CCS81x\n"); + ccs811_set_wakeup(data, false); + return -ENODEV; + } + + ret = i2c_smbus_read_byte_data(client, CCS811_HW_VERSION); + if (ret < 0) { + ccs811_set_wakeup(data, false); + return ret; + } + + if ((ret & CCS811_HW_VERSION_MASK) != CCS811_HW_VERSION_VALUE) { + dev_err(&client->dev, "no CCS811 sensor\n"); + ccs811_set_wakeup(data, false); + return -ENODEV; + } + + ret = ccs811_setup(client); + if (ret < 0) { + ccs811_set_wakeup(data, false); + return ret; + } + + ccs811_set_wakeup(data, false); + + mutex_init(&data->lock); + + indio_dev->name = id->name; + indio_dev->info = &ccs811_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + indio_dev->channels = ccs811_channels; + indio_dev->num_channels = ARRAY_SIZE(ccs811_channels); + + if (client->irq > 0) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + ccs811_data_rdy_trigger_poll, + NULL, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "ccs811_irq", indio_dev); + if (ret) { + dev_err(&client->dev, "irq request error %d\n", -ret); + goto err_poweroff; + } + + data->drdy_trig = devm_iio_trigger_alloc(&client->dev, + "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!data->drdy_trig) { + ret = -ENOMEM; + goto err_poweroff; + } + + data->drdy_trig->ops = &ccs811_trigger_ops; + iio_trigger_set_drvdata(data->drdy_trig, indio_dev); + ret = iio_trigger_register(data->drdy_trig); + if (ret) + goto err_poweroff; + + indio_dev->trig = iio_trigger_get(data->drdy_trig); + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ccs811_trigger_handler, NULL); + + if (ret < 0) { + dev_err(&client->dev, "triggered buffer setup failed\n"); + goto err_trigger_unregister; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "unable to register iio device\n"); + goto err_buffer_cleanup; + } + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +err_trigger_unregister: + if (data->drdy_trig) + iio_trigger_unregister(data->drdy_trig); +err_poweroff: + i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE, CCS811_MODE_IDLE); + + return ret; +} + +static void ccs811_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ccs811_data *data = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + if (data->drdy_trig) + iio_trigger_unregister(data->drdy_trig); + + ret = i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE, + CCS811_MODE_IDLE); + if (ret) + dev_warn(&client->dev, "Failed to power down device (%pe)\n", + ERR_PTR(ret)); +} + +static const struct i2c_device_id ccs811_id[] = { + {"ccs811", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, ccs811_id); + +static const struct of_device_id ccs811_dt_ids[] = { + { .compatible = "ams,ccs811" }, + { } +}; +MODULE_DEVICE_TABLE(of, ccs811_dt_ids); + +static struct i2c_driver ccs811_driver = { + .driver = { + .name = "ccs811", + .of_match_table = ccs811_dt_ids, + }, + .probe = ccs811_probe, + .remove = ccs811_remove, + .id_table = ccs811_id, +}; +module_i2c_driver(ccs811_driver); + +MODULE_AUTHOR("Narcisa Vasile <narcisaanamaria12@gmail.com>"); +MODULE_DESCRIPTION("CCS811 volatile organic compounds sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c new file mode 100644 index 000000000..e9857d93b --- /dev/null +++ b/drivers/iio/chemical/pms7003.c @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Plantower PMS7003 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + */ + +#include <asm/unaligned.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/serdev.h> + +#define PMS7003_DRIVER_NAME "pms7003" + +#define PMS7003_MAGIC 0x424d +/* last 2 data bytes hold frame checksum */ +#define PMS7003_MAX_DATA_LENGTH 28 +#define PMS7003_CHECKSUM_LENGTH 2 +#define PMS7003_PM10_OFFSET 10 +#define PMS7003_PM2P5_OFFSET 8 +#define PMS7003_PM1_OFFSET 6 + +#define PMS7003_TIMEOUT msecs_to_jiffies(6000) +#define PMS7003_CMD_LENGTH 7 +#define PMS7003_PM_MAX 1000 +#define PMS7003_PM_MIN 0 + +enum { + PM1, + PM2P5, + PM10, +}; + +enum pms7003_cmd { + CMD_WAKEUP, + CMD_ENTER_PASSIVE_MODE, + CMD_READ_PASSIVE, + CMD_SLEEP, +}; + +/* + * commands have following format: + * + * +------+------+-----+------+-----+-----------+-----------+ + * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb | + * +------+------+-----+------+-----+-----------+-----------+ + */ +static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = { + [CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 }, + [CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 }, + [CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 }, + [CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 }, +}; + +struct pms7003_frame { + u8 data[PMS7003_MAX_DATA_LENGTH]; + u16 expected_length; + u16 length; +}; + +struct pms7003_state { + struct serdev_device *serdev; + struct pms7003_frame frame; + struct completion frame_ready; + struct mutex lock; /* must be held whenever state gets touched */ + /* Used to construct scan to push to the IIO buffer */ + struct { + u16 data[3]; /* PM1, PM2P5, PM10 */ + s64 ts; + } scan; +}; + +static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd) +{ + int ret; + + ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd], + PMS7003_CMD_LENGTH, PMS7003_TIMEOUT); + if (ret < PMS7003_CMD_LENGTH) + return ret < 0 ? ret : -EIO; + + ret = wait_for_completion_interruptible_timeout(&state->frame_ready, + PMS7003_TIMEOUT); + if (!ret) + ret = -ETIMEDOUT; + + return ret < 0 ? ret : 0; +} + +static u16 pms7003_get_pm(const u8 *data) +{ + return clamp_val(get_unaligned_be16(data), + PMS7003_PM_MIN, PMS7003_PM_MAX); +} + +static irqreturn_t pms7003_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int ret; + + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + goto err; + } + + state->scan.data[PM1] = + pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET); + state->scan.data[PM2P5] = + pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET); + state->scan.data[PM10] = + pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET); + mutex_unlock(&state->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, &state->scan, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int pms7003_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + return ret; + } + + *val = pms7003_get_pm(frame->data + chan->address); + mutex_unlock(&state->lock); + + return IIO_VAL_INT; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static const struct iio_info pms7003_info = { + .read_raw = pms7003_read_raw, +}; + +#define PMS7003_CHAN(_index, _mod, _addr) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .address = _addr, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 10, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec pms7003_channels[] = { + PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET), + PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET), + PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static u16 pms7003_calc_checksum(struct pms7003_frame *frame) +{ + u16 checksum = (PMS7003_MAGIC >> 8) + (u8)(PMS7003_MAGIC & 0xff) + + (frame->length >> 8) + (u8)frame->length; + int i; + + for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++) + checksum += frame->data[i]; + + return checksum; +} + +static bool pms7003_frame_is_okay(struct pms7003_frame *frame) +{ + int offset = frame->length - PMS7003_CHECKSUM_LENGTH; + u16 checksum = get_unaligned_be16(frame->data + offset); + + return checksum == pms7003_calc_checksum(frame); +} + +static int pms7003_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int num; + + if (!frame->expected_length) { + u16 magic; + + /* wait for SOF and data length */ + if (size < 4) + return 0; + + magic = get_unaligned_be16(buf); + if (magic != PMS7003_MAGIC) + return 2; + + num = get_unaligned_be16(buf + 2); + if (num <= PMS7003_MAX_DATA_LENGTH) { + frame->expected_length = num; + frame->length = 0; + } + + return 4; + } + + num = min(size, (size_t)(frame->expected_length - frame->length)); + memcpy(frame->data + frame->length, buf, num); + frame->length += num; + + if (frame->length == frame->expected_length) { + if (pms7003_frame_is_okay(frame)) + complete(&state->frame_ready); + + frame->expected_length = 0; + } + + return num; +} + +static const struct serdev_device_ops pms7003_serdev_ops = { + .receive_buf = pms7003_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static void pms7003_stop(void *data) +{ + struct pms7003_state *state = data; + + pms7003_do_cmd(state, CMD_SLEEP); +} + +static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 }; + +static int pms7003_probe(struct serdev_device *serdev) +{ + struct pms7003_state *state; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + serdev_device_set_drvdata(serdev, indio_dev); + state->serdev = serdev; + indio_dev->info = &pms7003_info; + indio_dev->name = PMS7003_DRIVER_NAME; + indio_dev->channels = pms7003_channels; + indio_dev->num_channels = ARRAY_SIZE(pms7003_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = pms7003_scan_masks; + + mutex_init(&state->lock); + init_completion(&state->frame_ready); + + serdev_device_set_client_ops(serdev, &pms7003_serdev_ops); + ret = devm_serdev_device_open(&serdev->dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, 9600); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return ret; + + ret = pms7003_do_cmd(state, CMD_WAKEUP); + if (ret) { + dev_err(&serdev->dev, "failed to wakeup sensor\n"); + return ret; + } + + ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE); + if (ret) { + dev_err(&serdev->dev, "failed to enter passive mode\n"); + return ret; + } + + ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL, + pms7003_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(&serdev->dev, indio_dev); +} + +static const struct of_device_id pms7003_of_match[] = { + { .compatible = "plantower,pms1003" }, + { .compatible = "plantower,pms3003" }, + { .compatible = "plantower,pms5003" }, + { .compatible = "plantower,pms6003" }, + { .compatible = "plantower,pms7003" }, + { .compatible = "plantower,pmsa003" }, + { } +}; +MODULE_DEVICE_TABLE(of, pms7003_of_match); + +static struct serdev_device_driver pms7003_driver = { + .driver = { + .name = PMS7003_DRIVER_NAME, + .of_match_table = pms7003_of_match, + }, + .probe = pms7003_probe, +}; +module_serdev_device_driver(pms7003_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/scd30.h b/drivers/iio/chemical/scd30.h new file mode 100644 index 000000000..1ac9f3f79 --- /dev/null +++ b/drivers/iio/chemical/scd30.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _SCD30_H +#define _SCD30_H + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/pm.h> +#include <linux/regulator/consumer.h> +#include <linux/types.h> + +struct scd30_state; + +enum scd30_cmd { + /* start continuous measurement with pressure compensation */ + CMD_START_MEAS, + /* stop continuous measurement */ + CMD_STOP_MEAS, + /* set/get measurement interval */ + CMD_MEAS_INTERVAL, + /* check whether new measurement is ready */ + CMD_MEAS_READY, + /* get measurement */ + CMD_READ_MEAS, + /* turn on/off automatic self calibration */ + CMD_ASC, + /* set/get forced recalibration value */ + CMD_FRC, + /* set/get temperature offset */ + CMD_TEMP_OFFSET, + /* get firmware version */ + CMD_FW_VERSION, + /* reset sensor */ + CMD_RESET, + /* + * Command for altitude compensation was omitted intentionally because + * the same can be achieved by means of CMD_START_MEAS which takes + * pressure above the sea level as an argument. + */ +}; + +#define SCD30_MEAS_COUNT 3 + +typedef int (*scd30_command_t)(struct scd30_state *state, enum scd30_cmd cmd, u16 arg, + void *response, int size); + +struct scd30_state { + /* serialize access to the device */ + struct mutex lock; + struct device *dev; + struct regulator *vdd; + struct completion meas_ready; + /* + * priv pointer is solely for serdev driver private data. We keep it + * here because driver_data inside dev has been already used for iio and + * struct serdev_device doesn't have one. + */ + void *priv; + int irq; + /* + * no way to retrieve current ambient pressure compensation value from + * the sensor so keep one around + */ + u16 pressure_comp; + u16 meas_interval; + int meas[SCD30_MEAS_COUNT]; + + scd30_command_t command; +}; + +extern const struct dev_pm_ops scd30_pm_ops; + +int scd30_probe(struct device *dev, int irq, const char *name, void *priv, scd30_command_t command); + +#endif diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c new file mode 100644 index 000000000..682fca39d --- /dev/null +++ b/drivers/iio/chemical/scd30_core.c @@ -0,0 +1,766 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SCD30 carbon dioxide sensor core driver + * + * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com> + */ +#include <linux/bits.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/types.h> +#include <linux/interrupt.h> +#include <linux/irqreturn.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regulator/consumer.h> +#include <linux/string.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <asm/byteorder.h> + +#include "scd30.h" + +#define SCD30_PRESSURE_COMP_MIN_MBAR 700 +#define SCD30_PRESSURE_COMP_MAX_MBAR 1400 +#define SCD30_PRESSURE_COMP_DEFAULT 1013 +#define SCD30_MEAS_INTERVAL_MIN_S 2 +#define SCD30_MEAS_INTERVAL_MAX_S 1800 +#define SCD30_MEAS_INTERVAL_DEFAULT SCD30_MEAS_INTERVAL_MIN_S +#define SCD30_FRC_MIN_PPM 400 +#define SCD30_FRC_MAX_PPM 2000 +#define SCD30_TEMP_OFFSET_MAX 655360 +#define SCD30_EXTRA_TIMEOUT_PER_S 250 + +enum { + SCD30_CONC, + SCD30_TEMP, + SCD30_HR, +}; + +static int scd30_command_write(struct scd30_state *state, enum scd30_cmd cmd, u16 arg) +{ + return state->command(state, cmd, arg, NULL, 0); +} + +static int scd30_command_read(struct scd30_state *state, enum scd30_cmd cmd, u16 *val) +{ + __be16 tmp; + int ret; + + ret = state->command(state, cmd, 0, &tmp, sizeof(tmp)); + *val = be16_to_cpup(&tmp); + + return ret; +} + +static int scd30_reset(struct scd30_state *state) +{ + int ret; + u16 val; + + ret = scd30_command_write(state, CMD_RESET, 0); + if (ret) + return ret; + + /* sensor boots up within 2 secs */ + msleep(2000); + /* + * Power-on-reset causes sensor to produce some glitch on i2c bus and + * some controllers end up in error state. Try to recover by placing + * any data on the bus. + */ + scd30_command_read(state, CMD_MEAS_READY, &val); + + return 0; +} + +/* simplified float to fixed point conversion with a scaling factor of 0.01 */ +static int scd30_float_to_fp(int float32) +{ + int fraction, shift, + mantissa = float32 & GENMASK(22, 0), + sign = (float32 & BIT(31)) ? -1 : 1, + exp = (float32 & ~BIT(31)) >> 23; + + /* special case 0 */ + if (!exp && !mantissa) + return 0; + + exp -= 127; + if (exp < 0) { + exp = -exp; + /* return values ranging from 1 to 99 */ + return sign * ((((BIT(23) + mantissa) * 100) >> 23) >> exp); + } + + /* return values starting at 100 */ + shift = 23 - exp; + float32 = BIT(exp) + (mantissa >> shift); + fraction = mantissa & GENMASK(shift - 1, 0); + + return sign * (float32 * 100 + ((fraction * 100) >> shift)); +} + +static int scd30_read_meas(struct scd30_state *state) +{ + int i, ret; + + ret = state->command(state, CMD_READ_MEAS, 0, state->meas, sizeof(state->meas)); + if (ret) + return ret; + + be32_to_cpu_array(state->meas, (__be32 *)state->meas, ARRAY_SIZE(state->meas)); + + for (i = 0; i < ARRAY_SIZE(state->meas); i++) + state->meas[i] = scd30_float_to_fp(state->meas[i]); + + /* + * co2 is left unprocessed while temperature and humidity are scaled + * to milli deg C and milli percent respectively. + */ + state->meas[SCD30_TEMP] *= 10; + state->meas[SCD30_HR] *= 10; + + return 0; +} + +static int scd30_wait_meas_irq(struct scd30_state *state) +{ + int ret, timeout; + + reinit_completion(&state->meas_ready); + enable_irq(state->irq); + timeout = msecs_to_jiffies(state->meas_interval * (1000 + SCD30_EXTRA_TIMEOUT_PER_S)); + ret = wait_for_completion_interruptible_timeout(&state->meas_ready, timeout); + if (ret > 0) + ret = 0; + else if (!ret) + ret = -ETIMEDOUT; + + disable_irq(state->irq); + + return ret; +} + +static int scd30_wait_meas_poll(struct scd30_state *state) +{ + int timeout = state->meas_interval * SCD30_EXTRA_TIMEOUT_PER_S, tries = 5; + + do { + int ret; + u16 val; + + ret = scd30_command_read(state, CMD_MEAS_READY, &val); + if (ret) + return -EIO; + + /* new measurement available */ + if (val) + break; + + msleep_interruptible(timeout); + } while (--tries); + + return tries ? 0 : -ETIMEDOUT; +} + +static int scd30_read_poll(struct scd30_state *state) +{ + int ret; + + ret = scd30_wait_meas_poll(state); + if (ret) + return ret; + + return scd30_read_meas(state); +} + +static int scd30_read(struct scd30_state *state) +{ + if (state->irq > 0) + return scd30_wait_meas_irq(state); + + return scd30_read_poll(state); +} + +static int scd30_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct scd30_state *state = iio_priv(indio_dev); + int ret = -EINVAL; + u16 tmp; + + mutex_lock(&state->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + if (chan->output) { + *val = state->pressure_comp; + ret = IIO_VAL_INT; + break; + } + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + break; + + ret = scd30_read(state); + if (ret) { + iio_device_release_direct_mode(indio_dev); + break; + } + + *val = state->meas[chan->address]; + iio_device_release_direct_mode(indio_dev); + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 1; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = scd30_command_read(state, CMD_MEAS_INTERVAL, &tmp); + if (ret) + break; + + *val = 0; + *val2 = 1000000000 / tmp; + ret = IIO_VAL_INT_PLUS_NANO; + break; + case IIO_CHAN_INFO_CALIBBIAS: + ret = scd30_command_read(state, CMD_TEMP_OFFSET, &tmp); + if (ret) + break; + + *val = tmp; + ret = IIO_VAL_INT; + break; + } + mutex_unlock(&state->lock); + + return ret; +} + +static int scd30_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct scd30_state *state = iio_priv(indio_dev); + int ret = -EINVAL; + + mutex_lock(&state->lock); + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val) + break; + + val = 1000000000 / val2; + if (val < SCD30_MEAS_INTERVAL_MIN_S || val > SCD30_MEAS_INTERVAL_MAX_S) + break; + + ret = scd30_command_write(state, CMD_MEAS_INTERVAL, val); + if (ret) + break; + + state->meas_interval = val; + break; + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PRESSURE: + if (val < SCD30_PRESSURE_COMP_MIN_MBAR || + val > SCD30_PRESSURE_COMP_MAX_MBAR) + break; + + ret = scd30_command_write(state, CMD_START_MEAS, val); + if (ret) + break; + + state->pressure_comp = val; + break; + default: + break; + } + break; + case IIO_CHAN_INFO_CALIBBIAS: + if (val < 0 || val > SCD30_TEMP_OFFSET_MAX) + break; + /* + * Manufacturer does not explicitly specify min/max sensible + * values hence check is omitted for simplicity. + */ + ret = scd30_command_write(state, CMD_TEMP_OFFSET / 10, val); + } + mutex_unlock(&state->lock); + + return ret; +} + +static int scd30_write_raw_get_fmt(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_CALIBBIAS: + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static const int scd30_pressure_raw_available[] = { + SCD30_PRESSURE_COMP_MIN_MBAR, 1, SCD30_PRESSURE_COMP_MAX_MBAR, +}; + +static const int scd30_temp_calibbias_available[] = { + 0, 10, SCD30_TEMP_OFFSET_MAX, +}; + +static int scd30_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_RAW: + *vals = scd30_pressure_raw_available; + *type = IIO_VAL_INT; + + return IIO_AVAIL_RANGE; + case IIO_CHAN_INFO_CALIBBIAS: + *vals = scd30_temp_calibbias_available; + *type = IIO_VAL_INT; + + return IIO_AVAIL_RANGE; + } + + return -EINVAL; +} + +static ssize_t sampling_frequency_available_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int i = SCD30_MEAS_INTERVAL_MIN_S; + ssize_t len = 0; + + do { + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ", 1000000000 / i); + /* + * Not all values fit PAGE_SIZE buffer hence print every 6th + * (each frequency differs by 6s in time domain from the + * adjacent). Unlisted but valid ones are still accepted. + */ + i += 6; + } while (i <= SCD30_MEAS_INTERVAL_MAX_S); + + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t calibration_auto_enable_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd30_state *state = iio_priv(indio_dev); + int ret; + u16 val; + + mutex_lock(&state->lock); + ret = scd30_command_read(state, CMD_ASC, &val); + mutex_unlock(&state->lock); + + return ret ?: sprintf(buf, "%d\n", val); +} + +static ssize_t calibration_auto_enable_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd30_state *state = iio_priv(indio_dev); + bool val; + int ret; + + ret = kstrtobool(buf, &val); + if (ret) + return ret; + + mutex_lock(&state->lock); + ret = scd30_command_write(state, CMD_ASC, val); + mutex_unlock(&state->lock); + + return ret ?: len; +} + +static ssize_t calibration_forced_value_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd30_state *state = iio_priv(indio_dev); + int ret; + u16 val; + + mutex_lock(&state->lock); + ret = scd30_command_read(state, CMD_FRC, &val); + mutex_unlock(&state->lock); + + return ret ?: sprintf(buf, "%d\n", val); +} + +static ssize_t calibration_forced_value_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd30_state *state = iio_priv(indio_dev); + int ret; + u16 val; + + ret = kstrtou16(buf, 0, &val); + if (ret) + return ret; + + if (val < SCD30_FRC_MIN_PPM || val > SCD30_FRC_MAX_PPM) + return -EINVAL; + + mutex_lock(&state->lock); + ret = scd30_command_write(state, CMD_FRC, val); + mutex_unlock(&state->lock); + + return ret ?: len; +} + +static IIO_DEVICE_ATTR_RO(sampling_frequency_available, 0); +static IIO_DEVICE_ATTR_RW(calibration_auto_enable, 0); +static IIO_DEVICE_ATTR_RW(calibration_forced_value, 0); + +static struct attribute *scd30_attrs[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_calibration_auto_enable.dev_attr.attr, + &iio_dev_attr_calibration_forced_value.dev_attr.attr, + NULL +}; + +static const struct attribute_group scd30_attr_group = { + .attrs = scd30_attrs, +}; + +static const struct iio_info scd30_info = { + .attrs = &scd30_attr_group, + .read_raw = scd30_read_raw, + .write_raw = scd30_write_raw, + .write_raw_get_fmt = scd30_write_raw_get_fmt, + .read_avail = scd30_read_avail, +}; + +#define SCD30_CHAN_SCAN_TYPE(_sign, _realbits) .scan_type = { \ + .sign = _sign, \ + .realbits = _realbits, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ +} + +static const struct iio_chan_spec scd30_channels[] = { + { + /* + * this channel is special in a sense we are pretending that + * sensor is able to change measurement chamber pressure but in + * fact we're just setting pressure compensation value + */ + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), + .output = 1, + .scan_index = -1, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .address = SCD30_CONC, + .scan_index = SCD30_CONC, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .modified = 1, + + SCD30_CHAN_SCAN_TYPE('u', 20), + }, + { + .type = IIO_TEMP, + .address = SCD30_TEMP, + .scan_index = SCD30_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_CALIBBIAS), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_CALIBBIAS), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + + SCD30_CHAN_SCAN_TYPE('s', 18), + }, + { + .type = IIO_HUMIDITYRELATIVE, + .address = SCD30_HR, + .scan_index = SCD30_HR, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + + SCD30_CHAN_SCAN_TYPE('u', 17), + }, + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static int scd30_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct scd30_state *state = iio_priv(indio_dev); + int ret; + + ret = scd30_command_write(state, CMD_STOP_MEAS, 0); + if (ret) + return ret; + + return regulator_disable(state->vdd); +} + +static int scd30_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct scd30_state *state = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(state->vdd); + if (ret) + return ret; + + return scd30_command_write(state, CMD_START_MEAS, state->pressure_comp); +} + +EXPORT_NS_SIMPLE_DEV_PM_OPS(scd30_pm_ops, scd30_suspend, scd30_resume, IIO_SCD30); + +static void scd30_stop_meas(void *data) +{ + struct scd30_state *state = data; + + scd30_command_write(state, CMD_STOP_MEAS, 0); +} + +static void scd30_disable_regulator(void *data) +{ + struct scd30_state *state = data; + + regulator_disable(state->vdd); +} + +static irqreturn_t scd30_irq_handler(int irq, void *priv) +{ + struct iio_dev *indio_dev = priv; + + if (iio_buffer_enabled(indio_dev)) { + iio_trigger_poll(indio_dev->trig); + + return IRQ_HANDLED; + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t scd30_irq_thread_handler(int irq, void *priv) +{ + struct iio_dev *indio_dev = priv; + struct scd30_state *state = iio_priv(indio_dev); + int ret; + + ret = scd30_read_meas(state); + if (ret) + goto out; + + complete_all(&state->meas_ready); +out: + return IRQ_HANDLED; +} + +static irqreturn_t scd30_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct scd30_state *state = iio_priv(indio_dev); + struct { + int data[SCD30_MEAS_COUNT]; + s64 ts __aligned(8); + } scan; + int ret; + + mutex_lock(&state->lock); + if (!iio_trigger_using_own(indio_dev)) + ret = scd30_read_poll(state); + else + ret = scd30_read_meas(state); + memset(&scan, 0, sizeof(scan)); + memcpy(scan.data, state->meas, sizeof(state->meas)); + mutex_unlock(&state->lock); + if (ret) + goto out; + + iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev)); +out: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int scd30_set_trigger_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct scd30_state *st = iio_priv(indio_dev); + + if (state) + enable_irq(st->irq); + else + disable_irq(st->irq); + + return 0; +} + +static const struct iio_trigger_ops scd30_trigger_ops = { + .set_trigger_state = scd30_set_trigger_state, + .validate_device = iio_trigger_validate_own_device, +}; + +static int scd30_setup_trigger(struct iio_dev *indio_dev) +{ + struct scd30_state *state = iio_priv(indio_dev); + struct device *dev = indio_dev->dev.parent; + struct iio_trigger *trig; + int ret; + + trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, + iio_device_id(indio_dev)); + if (!trig) { + dev_err(dev, "failed to allocate trigger\n"); + return -ENOMEM; + } + + trig->ops = &scd30_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + ret = devm_iio_trigger_register(dev, trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(trig); + + /* + * Interrupt is enabled just before taking a fresh measurement + * and disabled afterwards. This means we need to ensure it is not + * enabled here to keep calls to enable/disable balanced. + */ + ret = devm_request_threaded_irq(dev, state->irq, scd30_irq_handler, + scd30_irq_thread_handler, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT | + IRQF_NO_AUTOEN, + indio_dev->name, indio_dev); + if (ret) + dev_err(dev, "failed to request irq\n"); + + return ret; +} + +int scd30_probe(struct device *dev, int irq, const char *name, void *priv, + scd30_command_t command) +{ + static const unsigned long scd30_scan_masks[] = { 0x07, 0x00 }; + struct scd30_state *state; + struct iio_dev *indio_dev; + int ret; + u16 val; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + state->dev = dev; + state->priv = priv; + state->irq = irq; + state->pressure_comp = SCD30_PRESSURE_COMP_DEFAULT; + state->meas_interval = SCD30_MEAS_INTERVAL_DEFAULT; + state->command = command; + mutex_init(&state->lock); + init_completion(&state->meas_ready); + + dev_set_drvdata(dev, indio_dev); + + indio_dev->info = &scd30_info; + indio_dev->name = name; + indio_dev->channels = scd30_channels; + indio_dev->num_channels = ARRAY_SIZE(scd30_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = scd30_scan_masks; + + state->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(state->vdd)) + return dev_err_probe(dev, PTR_ERR(state->vdd), "failed to get regulator\n"); + + ret = regulator_enable(state->vdd); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, scd30_disable_regulator, state); + if (ret) + return ret; + + ret = scd30_reset(state); + if (ret) { + dev_err(dev, "failed to reset device: %d\n", ret); + return ret; + } + + if (state->irq > 0) { + ret = scd30_setup_trigger(indio_dev); + if (ret) { + dev_err(dev, "failed to setup trigger: %d\n", ret); + return ret; + } + } + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, scd30_trigger_handler, NULL); + if (ret) + return ret; + + ret = scd30_command_read(state, CMD_FW_VERSION, &val); + if (ret) { + dev_err(dev, "failed to read firmware version: %d\n", ret); + return ret; + } + dev_info(dev, "firmware version: %d.%d\n", val >> 8, (char)val); + + ret = scd30_command_write(state, CMD_MEAS_INTERVAL, state->meas_interval); + if (ret) { + dev_err(dev, "failed to set measurement interval: %d\n", ret); + return ret; + } + + ret = scd30_command_write(state, CMD_START_MEAS, state->pressure_comp); + if (ret) { + dev_err(dev, "failed to start measurement: %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(dev, scd30_stop_meas, state); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS(scd30_probe, IIO_SCD30); + +MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>"); +MODULE_DESCRIPTION("Sensirion SCD30 carbon dioxide sensor core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/scd30_i2c.c b/drivers/iio/chemical/scd30_i2c.c new file mode 100644 index 000000000..bae479a47 --- /dev/null +++ b/drivers/iio/chemical/scd30_i2c.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SCD30 carbon dioxide sensor i2c driver + * + * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com> + * + * I2C slave address: 0x61 + */ +#include <linux/crc8.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/types.h> +#include <asm/unaligned.h> + +#include "scd30.h" + +#define SCD30_I2C_MAX_BUF_SIZE 18 +#define SCD30_I2C_CRC8_POLYNOMIAL 0x31 + +static u16 scd30_i2c_cmd_lookup_tbl[] = { + [CMD_START_MEAS] = 0x0010, + [CMD_STOP_MEAS] = 0x0104, + [CMD_MEAS_INTERVAL] = 0x4600, + [CMD_MEAS_READY] = 0x0202, + [CMD_READ_MEAS] = 0x0300, + [CMD_ASC] = 0x5306, + [CMD_FRC] = 0x5204, + [CMD_TEMP_OFFSET] = 0x5403, + [CMD_FW_VERSION] = 0xd100, + [CMD_RESET] = 0xd304, +}; + +DECLARE_CRC8_TABLE(scd30_i2c_crc8_tbl); + +static int scd30_i2c_xfer(struct scd30_state *state, char *txbuf, int txsize, + char *rxbuf, int rxsize) +{ + struct i2c_client *client = to_i2c_client(state->dev); + int ret; + + /* + * repeated start is not supported hence instead of sending two i2c + * messages in a row we send one by one + */ + ret = i2c_master_send(client, txbuf, txsize); + if (ret < 0) + return ret; + if (ret != txsize) + return -EIO; + + if (!rxbuf) + return 0; + + ret = i2c_master_recv(client, rxbuf, rxsize); + if (ret < 0) + return ret; + if (ret != rxsize) + return -EIO; + + return 0; +} + +static int scd30_i2c_command(struct scd30_state *state, enum scd30_cmd cmd, u16 arg, + void *response, int size) +{ + char buf[SCD30_I2C_MAX_BUF_SIZE]; + char *rsp = response; + int i, ret; + char crc; + + put_unaligned_be16(scd30_i2c_cmd_lookup_tbl[cmd], buf); + i = 2; + + if (rsp) { + /* each two bytes are followed by a crc8 */ + size += size / 2; + } else { + put_unaligned_be16(arg, buf + i); + crc = crc8(scd30_i2c_crc8_tbl, buf + i, 2, CRC8_INIT_VALUE); + i += 2; + buf[i] = crc; + i += 1; + + /* commands below don't take an argument */ + if ((cmd == CMD_STOP_MEAS) || (cmd == CMD_RESET)) + i -= 3; + } + + ret = scd30_i2c_xfer(state, buf, i, buf, size); + if (ret) + return ret; + + /* validate received data and strip off crc bytes */ + for (i = 0; i < size; i += 3) { + crc = crc8(scd30_i2c_crc8_tbl, buf + i, 2, CRC8_INIT_VALUE); + if (crc != buf[i + 2]) { + dev_err(state->dev, "data integrity check failed\n"); + return -EIO; + } + + *rsp++ = buf[i]; + *rsp++ = buf[i + 1]; + } + + return 0; +} + +static int scd30_i2c_probe(struct i2c_client *client) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + crc8_populate_msb(scd30_i2c_crc8_tbl, SCD30_I2C_CRC8_POLYNOMIAL); + + return scd30_probe(&client->dev, client->irq, client->name, NULL, scd30_i2c_command); +} + +static const struct of_device_id scd30_i2c_of_match[] = { + { .compatible = "sensirion,scd30" }, + { } +}; +MODULE_DEVICE_TABLE(of, scd30_i2c_of_match); + +static struct i2c_driver scd30_i2c_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = scd30_i2c_of_match, + .pm = pm_sleep_ptr(&scd30_pm_ops), + }, + .probe_new = scd30_i2c_probe, +}; +module_i2c_driver(scd30_i2c_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>"); +MODULE_DESCRIPTION("Sensirion SCD30 carbon dioxide sensor i2c driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_SCD30); diff --git a/drivers/iio/chemical/scd30_serial.c b/drivers/iio/chemical/scd30_serial.c new file mode 100644 index 000000000..3c519103d --- /dev/null +++ b/drivers/iio/chemical/scd30_serial.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SCD30 carbon dioxide sensor serial driver + * + * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com> + */ +#include <linux/crc16.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/iio.h> +#include <linux/jiffies.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/serdev.h> +#include <linux/string.h> +#include <linux/types.h> +#include <asm/unaligned.h> + +#include "scd30.h" + +#define SCD30_SERDEV_ADDR 0x61 +#define SCD30_SERDEV_WRITE 0x06 +#define SCD30_SERDEV_READ 0x03 +#define SCD30_SERDEV_MAX_BUF_SIZE 17 +#define SCD30_SERDEV_RX_HEADER_SIZE 3 +#define SCD30_SERDEV_CRC_SIZE 2 +#define SCD30_SERDEV_TIMEOUT msecs_to_jiffies(200) + +struct scd30_serdev_priv { + struct completion meas_ready; + char *buf; + int num_expected; + int num; +}; + +static u16 scd30_serdev_cmd_lookup_tbl[] = { + [CMD_START_MEAS] = 0x0036, + [CMD_STOP_MEAS] = 0x0037, + [CMD_MEAS_INTERVAL] = 0x0025, + [CMD_MEAS_READY] = 0x0027, + [CMD_READ_MEAS] = 0x0028, + [CMD_ASC] = 0x003a, + [CMD_FRC] = 0x0039, + [CMD_TEMP_OFFSET] = 0x003b, + [CMD_FW_VERSION] = 0x0020, + [CMD_RESET] = 0x0034, +}; + +static u16 scd30_serdev_calc_crc(const char *buf, int size) +{ + return crc16(0xffff, buf, size); +} + +static int scd30_serdev_xfer(struct scd30_state *state, char *txbuf, int txsize, + char *rxbuf, int rxsize) +{ + struct serdev_device *serdev = to_serdev_device(state->dev); + struct scd30_serdev_priv *priv = state->priv; + int ret; + + priv->buf = rxbuf; + priv->num_expected = rxsize; + priv->num = 0; + + ret = serdev_device_write(serdev, txbuf, txsize, SCD30_SERDEV_TIMEOUT); + if (ret < 0) + return ret; + if (ret != txsize) + return -EIO; + + ret = wait_for_completion_interruptible_timeout(&priv->meas_ready, SCD30_SERDEV_TIMEOUT); + if (ret < 0) + return ret; + if (!ret) + return -ETIMEDOUT; + + return 0; +} + +static int scd30_serdev_command(struct scd30_state *state, enum scd30_cmd cmd, u16 arg, + void *response, int size) +{ + /* + * Communication over serial line is based on modbus protocol (or rather + * its variation called modbus over serial to be precise). Upon + * receiving a request device should reply with response. + * + * Frame below represents a request message. Each field takes + * exactly one byte. + * + * +------+------+-----+-----+-------+-------+-----+-----+ + * | dev | op | reg | reg | byte1 | byte0 | crc | crc | + * | addr | code | msb | lsb | | | lsb | msb | + * +------+------+-----+-----+-------+-------+-----+-----+ + * + * The message device replies with depends on the 'op code' field from + * the request. In case it was set to SCD30_SERDEV_WRITE sensor should + * reply with unchanged request. Otherwise 'op code' was set to + * SCD30_SERDEV_READ and response looks like the one below. As with + * request, each field takes one byte. + * + * +------+------+--------+-------+-----+-------+-----+-----+ + * | dev | op | num of | byte0 | ... | byteN | crc | crc | + * | addr | code | bytes | | | | lsb | msb | + * +------+------+--------+-------+-----+-------+-----+-----+ + */ + char txbuf[SCD30_SERDEV_MAX_BUF_SIZE] = { SCD30_SERDEV_ADDR }, + rxbuf[SCD30_SERDEV_MAX_BUF_SIZE]; + int ret, rxsize, txsize = 2; + char *rsp = response; + u16 crc; + + put_unaligned_be16(scd30_serdev_cmd_lookup_tbl[cmd], txbuf + txsize); + txsize += 2; + + if (rsp) { + txbuf[1] = SCD30_SERDEV_READ; + if (cmd == CMD_READ_MEAS) + /* number of u16 words to read */ + put_unaligned_be16(size / 2, txbuf + txsize); + else + put_unaligned_be16(0x0001, txbuf + txsize); + txsize += 2; + crc = scd30_serdev_calc_crc(txbuf, txsize); + put_unaligned_le16(crc, txbuf + txsize); + txsize += 2; + rxsize = SCD30_SERDEV_RX_HEADER_SIZE + size + SCD30_SERDEV_CRC_SIZE; + } else { + if ((cmd == CMD_STOP_MEAS) || (cmd == CMD_RESET)) + arg = 0x0001; + + txbuf[1] = SCD30_SERDEV_WRITE; + put_unaligned_be16(arg, txbuf + txsize); + txsize += 2; + crc = scd30_serdev_calc_crc(txbuf, txsize); + put_unaligned_le16(crc, txbuf + txsize); + txsize += 2; + rxsize = txsize; + } + + ret = scd30_serdev_xfer(state, txbuf, txsize, rxbuf, rxsize); + if (ret) + return ret; + + switch (txbuf[1]) { + case SCD30_SERDEV_WRITE: + if (memcmp(txbuf, rxbuf, txsize)) { + dev_err(state->dev, "wrong message received\n"); + return -EIO; + } + break; + case SCD30_SERDEV_READ: + if (rxbuf[2] != (rxsize - SCD30_SERDEV_RX_HEADER_SIZE - SCD30_SERDEV_CRC_SIZE)) { + dev_err(state->dev, "received data size does not match header\n"); + return -EIO; + } + + rxsize -= SCD30_SERDEV_CRC_SIZE; + crc = get_unaligned_le16(rxbuf + rxsize); + if (crc != scd30_serdev_calc_crc(rxbuf, rxsize)) { + dev_err(state->dev, "data integrity check failed\n"); + return -EIO; + } + + rxsize -= SCD30_SERDEV_RX_HEADER_SIZE; + memcpy(rsp, rxbuf + SCD30_SERDEV_RX_HEADER_SIZE, rxsize); + break; + default: + dev_err(state->dev, "received unknown op code\n"); + return -EIO; + } + + return 0; +} + +static int scd30_serdev_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); + struct scd30_serdev_priv *priv; + struct scd30_state *state; + int num; + + if (!indio_dev) + return 0; + + state = iio_priv(indio_dev); + priv = state->priv; + + /* just in case sensor puts some unexpected bytes on the bus */ + if (!priv->buf) + return 0; + + if (priv->num + size >= priv->num_expected) + num = priv->num_expected - priv->num; + else + num = size; + + memcpy(priv->buf + priv->num, buf, num); + priv->num += num; + + if (priv->num == priv->num_expected) { + priv->buf = NULL; + complete(&priv->meas_ready); + } + + return num; +} + +static const struct serdev_device_ops scd30_serdev_ops = { + .receive_buf = scd30_serdev_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static int scd30_serdev_probe(struct serdev_device *serdev) +{ + struct device *dev = &serdev->dev; + struct scd30_serdev_priv *priv; + int irq, ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + init_completion(&priv->meas_ready); + serdev_device_set_client_ops(serdev, &scd30_serdev_ops); + + ret = devm_serdev_device_open(dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, 19200); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return ret; + + irq = fwnode_irq_get(dev_fwnode(dev), 0); + + return scd30_probe(dev, irq, KBUILD_MODNAME, priv, scd30_serdev_command); +} + +static const struct of_device_id scd30_serdev_of_match[] = { + { .compatible = "sensirion,scd30" }, + { } +}; +MODULE_DEVICE_TABLE(of, scd30_serdev_of_match); + +static struct serdev_device_driver scd30_serdev_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = scd30_serdev_of_match, + .pm = pm_sleep_ptr(&scd30_pm_ops), + }, + .probe = scd30_serdev_probe, +}; +module_serdev_device_driver(scd30_serdev_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>"); +MODULE_DESCRIPTION("Sensirion SCD30 carbon dioxide sensor serial driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_SCD30); diff --git a/drivers/iio/chemical/scd4x.c b/drivers/iio/chemical/scd4x.c new file mode 100644 index 000000000..54066532e --- /dev/null +++ b/drivers/iio/chemical/scd4x.c @@ -0,0 +1,699 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SCD4X carbon dioxide sensor i2c driver + * + * Copyright (C) 2021 Protonic Holland + * Author: Roan van Dijk <roan@protonic.nl> + * + * I2C slave address: 0x62 + * + * Datasheets: + * https://www.sensirion.com/file/datasheet_scd4x + */ + +#include <asm/unaligned.h> +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/types.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/string.h> +#include <linux/sysfs.h> +#include <linux/types.h> + +#define SCD4X_CRC8_POLYNOMIAL 0x31 +#define SCD4X_TIMEOUT_ERR 1000 +#define SCD4X_READ_BUF_SIZE 9 +#define SCD4X_COMMAND_BUF_SIZE 2 +#define SCD4X_WRITE_BUF_SIZE 5 +#define SCD4X_FRC_MIN_PPM 0 +#define SCD4X_FRC_MAX_PPM 2000 +#define SCD4X_READY_MASK 0x01 + +/*Commands SCD4X*/ +enum scd4x_cmd { + CMD_START_MEAS = 0x21b1, + CMD_READ_MEAS = 0xec05, + CMD_STOP_MEAS = 0x3f86, + CMD_SET_TEMP_OFFSET = 0x241d, + CMD_GET_TEMP_OFFSET = 0x2318, + CMD_FRC = 0x362f, + CMD_SET_ASC = 0x2416, + CMD_GET_ASC = 0x2313, + CMD_GET_DATA_READY = 0xe4b8, +}; + +enum scd4x_channel_idx { + SCD4X_CO2, + SCD4X_TEMP, + SCD4X_HR, +}; + +struct scd4x_state { + struct i2c_client *client; + /* maintain access to device, to prevent concurrent reads/writes */ + struct mutex lock; + struct regulator *vdd; +}; + +DECLARE_CRC8_TABLE(scd4x_crc8_table); + +static int scd4x_i2c_xfer(struct scd4x_state *state, char *txbuf, int txsize, + char *rxbuf, int rxsize) +{ + struct i2c_client *client = state->client; + int ret; + + ret = i2c_master_send(client, txbuf, txsize); + + if (ret < 0) + return ret; + if (ret != txsize) + return -EIO; + + if (rxsize == 0) + return 0; + + ret = i2c_master_recv(client, rxbuf, rxsize); + if (ret < 0) + return ret; + if (ret != rxsize) + return -EIO; + + return 0; +} + +static int scd4x_send_command(struct scd4x_state *state, enum scd4x_cmd cmd) +{ + char buf[SCD4X_COMMAND_BUF_SIZE]; + int ret; + + /* + * Measurement needs to be stopped before sending commands. + * Except stop and start command. + */ + if ((cmd != CMD_STOP_MEAS) && (cmd != CMD_START_MEAS)) { + + ret = scd4x_send_command(state, CMD_STOP_MEAS); + if (ret) + return ret; + + /* execution time for stopping measurement */ + msleep_interruptible(500); + } + + put_unaligned_be16(cmd, buf); + ret = scd4x_i2c_xfer(state, buf, 2, buf, 0); + if (ret) + return ret; + + if ((cmd != CMD_STOP_MEAS) && (cmd != CMD_START_MEAS)) { + ret = scd4x_send_command(state, CMD_START_MEAS); + if (ret) + return ret; + } + + return 0; +} + +static int scd4x_read(struct scd4x_state *state, enum scd4x_cmd cmd, + void *response, int response_sz) +{ + struct i2c_client *client = state->client; + char buf[SCD4X_READ_BUF_SIZE]; + char *rsp = response; + int i, ret; + char crc; + + /* + * Measurement needs to be stopped before sending commands. + * Except for reading measurement and data ready command. + */ + if ((cmd != CMD_GET_DATA_READY) && (cmd != CMD_READ_MEAS)) { + ret = scd4x_send_command(state, CMD_STOP_MEAS); + if (ret) + return ret; + + /* execution time for stopping measurement */ + msleep_interruptible(500); + } + + /* CRC byte for every 2 bytes of data */ + response_sz += response_sz / 2; + + put_unaligned_be16(cmd, buf); + ret = scd4x_i2c_xfer(state, buf, 2, buf, response_sz); + if (ret) + return ret; + + for (i = 0; i < response_sz; i += 3) { + crc = crc8(scd4x_crc8_table, buf + i, 2, CRC8_INIT_VALUE); + if (crc != buf[i + 2]) { + dev_err(&client->dev, "CRC error\n"); + return -EIO; + } + + *rsp++ = buf[i]; + *rsp++ = buf[i + 1]; + } + + /* start measurement */ + if ((cmd != CMD_GET_DATA_READY) && (cmd != CMD_READ_MEAS)) { + ret = scd4x_send_command(state, CMD_START_MEAS); + if (ret) + return ret; + } + + return 0; +} + +static int scd4x_write(struct scd4x_state *state, enum scd4x_cmd cmd, uint16_t arg) +{ + char buf[SCD4X_WRITE_BUF_SIZE]; + int ret; + char crc; + + put_unaligned_be16(cmd, buf); + put_unaligned_be16(arg, buf + 2); + + crc = crc8(scd4x_crc8_table, buf + 2, 2, CRC8_INIT_VALUE); + buf[4] = crc; + + /* measurement needs to be stopped before sending commands */ + ret = scd4x_send_command(state, CMD_STOP_MEAS); + if (ret) + return ret; + + /* execution time */ + msleep_interruptible(500); + + ret = scd4x_i2c_xfer(state, buf, SCD4X_WRITE_BUF_SIZE, buf, 0); + if (ret) + return ret; + + /* start measurement, except for forced calibration command */ + if (cmd != CMD_FRC) { + ret = scd4x_send_command(state, CMD_START_MEAS); + if (ret) + return ret; + } + + return 0; +} + +static int scd4x_write_and_fetch(struct scd4x_state *state, enum scd4x_cmd cmd, + uint16_t arg, void *response, int response_sz) +{ + struct i2c_client *client = state->client; + char buf[SCD4X_READ_BUF_SIZE]; + char *rsp = response; + int i, ret; + char crc; + + ret = scd4x_write(state, CMD_FRC, arg); + if (ret) + goto err; + + /* execution time */ + msleep_interruptible(400); + + /* CRC byte for every 2 bytes of data */ + response_sz += response_sz / 2; + + ret = i2c_master_recv(client, buf, response_sz); + if (ret < 0) + goto err; + if (ret != response_sz) { + ret = -EIO; + goto err; + } + + for (i = 0; i < response_sz; i += 3) { + crc = crc8(scd4x_crc8_table, buf + i, 2, CRC8_INIT_VALUE); + if (crc != buf[i + 2]) { + dev_err(&client->dev, "CRC error\n"); + ret = -EIO; + goto err; + } + + *rsp++ = buf[i]; + *rsp++ = buf[i + 1]; + } + + return scd4x_send_command(state, CMD_START_MEAS); + +err: + /* + * on error try to start the measurement, + * puts sensor back into continuous measurement + */ + scd4x_send_command(state, CMD_START_MEAS); + + return ret; +} + +static int scd4x_read_meas(struct scd4x_state *state, uint16_t *meas) +{ + int i, ret; + __be16 buf[3]; + + ret = scd4x_read(state, CMD_READ_MEAS, buf, sizeof(buf)); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(buf); i++) + meas[i] = be16_to_cpu(buf[i]); + + return 0; +} + +static int scd4x_wait_meas_poll(struct scd4x_state *state) +{ + struct i2c_client *client = state->client; + int tries = 6; + int ret; + + do { + __be16 bval; + uint16_t val; + + ret = scd4x_read(state, CMD_GET_DATA_READY, &bval, sizeof(bval)); + if (ret) + return -EIO; + val = be16_to_cpu(bval); + + /* new measurement available */ + if (val & 0x7FF) + return 0; + + msleep_interruptible(1000); + } while (--tries); + + /* try to start sensor on timeout */ + ret = scd4x_send_command(state, CMD_START_MEAS); + if (ret) + dev_err(&client->dev, "failed to start measurement: %d\n", ret); + + return -ETIMEDOUT; +} + +static int scd4x_read_poll(struct scd4x_state *state, uint16_t *buf) +{ + int ret; + + ret = scd4x_wait_meas_poll(state); + if (ret) + return ret; + + return scd4x_read_meas(state, buf); +} + +static int scd4x_read_channel(struct scd4x_state *state, int chan) +{ + int ret; + uint16_t buf[3]; + + ret = scd4x_read_poll(state, buf); + if (ret) + return ret; + + return buf[chan]; +} + +static int scd4x_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct scd4x_state *state = iio_priv(indio_dev); + int ret; + __be16 tmp; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + mutex_lock(&state->lock); + ret = scd4x_read_channel(state, chan->address); + mutex_unlock(&state->lock); + + iio_device_release_direct_mode(indio_dev); + if (ret < 0) + return ret; + + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_CONCENTRATION) { + *val = 0; + *val2 = 100; + return IIO_VAL_INT_PLUS_MICRO; + } else if (chan->type == IIO_TEMP) { + *val = 175000; + *val2 = 65536; + return IIO_VAL_FRACTIONAL; + } else if (chan->type == IIO_HUMIDITYRELATIVE) { + *val = 100000; + *val2 = 65536; + return IIO_VAL_FRACTIONAL; + } + return -EINVAL; + case IIO_CHAN_INFO_OFFSET: + *val = -16852; + *val2 = 114286; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + mutex_lock(&state->lock); + ret = scd4x_read(state, CMD_GET_TEMP_OFFSET, &tmp, sizeof(tmp)); + mutex_unlock(&state->lock); + if (ret) + return ret; + + *val = be16_to_cpu(tmp); + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int scd4x_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct scd4x_state *state = iio_priv(indio_dev); + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + mutex_lock(&state->lock); + ret = scd4x_write(state, CMD_SET_TEMP_OFFSET, val); + mutex_unlock(&state->lock); + + return ret; + default: + return -EINVAL; + } +} + +static ssize_t calibration_auto_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd4x_state *state = iio_priv(indio_dev); + int ret; + __be16 bval; + u16 val; + + mutex_lock(&state->lock); + ret = scd4x_read(state, CMD_GET_ASC, &bval, sizeof(bval)); + mutex_unlock(&state->lock); + if (ret) { + dev_err(dev, "failed to read automatic calibration"); + return ret; + } + + val = (be16_to_cpu(bval) & SCD4X_READY_MASK) ? 1 : 0; + + return sysfs_emit(buf, "%d\n", val); +} + +static ssize_t calibration_auto_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd4x_state *state = iio_priv(indio_dev); + bool val; + int ret; + uint16_t value; + + ret = kstrtobool(buf, &val); + if (ret) + return ret; + + value = val; + + mutex_lock(&state->lock); + ret = scd4x_write(state, CMD_SET_ASC, value); + mutex_unlock(&state->lock); + if (ret) + dev_err(dev, "failed to set automatic calibration"); + + return ret ?: len; +} + +static ssize_t calibration_forced_value_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct scd4x_state *state = iio_priv(indio_dev); + uint16_t val, arg; + int ret; + + ret = kstrtou16(buf, 0, &arg); + if (ret) + return ret; + + if (arg < SCD4X_FRC_MIN_PPM || arg > SCD4X_FRC_MAX_PPM) + return -EINVAL; + + mutex_lock(&state->lock); + ret = scd4x_write_and_fetch(state, CMD_FRC, arg, &val, sizeof(val)); + mutex_unlock(&state->lock); + + if (ret) + return ret; + + if (val == 0xff) { + dev_err(dev, "forced calibration has failed"); + return -EINVAL; + } + + return len; +} + +static IIO_DEVICE_ATTR_RW(calibration_auto_enable, 0); +static IIO_DEVICE_ATTR_WO(calibration_forced_value, 0); + +static IIO_CONST_ATTR(calibration_forced_value_available, + __stringify([SCD4X_FRC_MIN_PPM 1 SCD4X_FRC_MAX_PPM])); + +static struct attribute *scd4x_attrs[] = { + &iio_dev_attr_calibration_auto_enable.dev_attr.attr, + &iio_dev_attr_calibration_forced_value.dev_attr.attr, + &iio_const_attr_calibration_forced_value_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group scd4x_attr_group = { + .attrs = scd4x_attrs, +}; + +static const struct iio_info scd4x_info = { + .attrs = &scd4x_attr_group, + .read_raw = scd4x_read_raw, + .write_raw = scd4x_write_raw, +}; + +static const struct iio_chan_spec scd4x_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = SCD4X_CO2, + .scan_index = SCD4X_CO2, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_CALIBBIAS), + .address = SCD4X_TEMP, + .scan_index = SCD4X_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = SCD4X_HR, + .scan_index = SCD4X_HR, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, +}; + +static int scd4x_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct scd4x_state *state = iio_priv(indio_dev); + int ret; + + ret = scd4x_send_command(state, CMD_STOP_MEAS); + if (ret) + return ret; + + return regulator_disable(state->vdd); +} + +static int scd4x_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct scd4x_state *state = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(state->vdd); + if (ret) + return ret; + + return scd4x_send_command(state, CMD_START_MEAS); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(scd4x_pm_ops, scd4x_suspend, scd4x_resume); + +static void scd4x_stop_meas(void *state) +{ + scd4x_send_command(state, CMD_STOP_MEAS); +} + +static void scd4x_disable_regulator(void *data) +{ + struct scd4x_state *state = data; + + regulator_disable(state->vdd); +} + +static irqreturn_t scd4x_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct scd4x_state *state = iio_priv(indio_dev); + struct { + uint16_t data[3]; + int64_t ts __aligned(8); + } scan; + int ret; + + memset(&scan, 0, sizeof(scan)); + mutex_lock(&state->lock); + ret = scd4x_read_poll(state, scan.data); + mutex_unlock(&state->lock); + if (ret) + goto out; + + iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev)); +out: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int scd4x_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + static const unsigned long scd4x_scan_masks[] = { 0x07, 0x00 }; + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct scd4x_state *state; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + mutex_init(&state->lock); + state->client = client; + crc8_populate_msb(scd4x_crc8_table, SCD4X_CRC8_POLYNOMIAL); + + indio_dev->info = &scd4x_info; + indio_dev->name = client->name; + indio_dev->channels = scd4x_channels; + indio_dev->num_channels = ARRAY_SIZE(scd4x_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = scd4x_scan_masks; + + state->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(state->vdd)) + return dev_err_probe(dev, PTR_ERR(state->vdd), "failed to get regulator\n"); + + ret = regulator_enable(state->vdd); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, scd4x_disable_regulator, state); + if (ret) + return ret; + + ret = scd4x_send_command(state, CMD_STOP_MEAS); + if (ret) { + dev_err(dev, "failed to stop measurement: %d\n", ret); + return ret; + } + + /* execution time */ + msleep_interruptible(500); + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, scd4x_trigger_handler, NULL); + if (ret) + return ret; + + ret = scd4x_send_command(state, CMD_START_MEAS); + if (ret) { + dev_err(dev, "failed to start measurement: %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(dev, scd4x_stop_meas, state); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id scd4x_dt_ids[] = { + { .compatible = "sensirion,scd40" }, + { .compatible = "sensirion,scd41" }, + { } +}; +MODULE_DEVICE_TABLE(of, scd4x_dt_ids); + +static struct i2c_driver scd4x_i2c_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = scd4x_dt_ids, + .pm = pm_sleep_ptr(&scd4x_pm_ops), + }, + .probe = scd4x_probe, +}; +module_i2c_driver(scd4x_i2c_driver); + +MODULE_AUTHOR("Roan van Dijk <roan@protonic.nl>"); +MODULE_DESCRIPTION("Sensirion SCD4X carbon dioxide sensor core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c new file mode 100644 index 000000000..e2c13c78c --- /dev/null +++ b/drivers/iio/chemical/sgp30.c @@ -0,0 +1,587 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * sgp30.c - Support for Sensirion SGP Gas Sensors + * + * Copyright (C) 2018 Andreas Brauchli <andreas.brauchli@sensirion.com> + * + * I2C slave address: 0x58 + * + * Datasheets: + * https://www.sensirion.com/file/datasheet_sgp30 + * https://www.sensirion.com/file/datasheet_sgpc3 + * + * TODO: + * - baseline support + * - humidity compensation + * - power mode switching (SGPC3) + */ + +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define SGP_WORD_LEN 2 +#define SGP_CRC8_POLYNOMIAL 0x31 +#define SGP_CRC8_INIT 0xff +#define SGP_CRC8_LEN 1 +#define SGP_CMD(cmd_word) cpu_to_be16(cmd_word) +#define SGP_CMD_DURATION_US 12000 +#define SGP_MEASUREMENT_DURATION_US 50000 +#define SGP_CMD_LEN SGP_WORD_LEN +#define SGP_CMD_MAX_BUF_SIZE (SGP_CMD_LEN + 2 * SGP_WORD_LEN) +#define SGP_MEASUREMENT_LEN 2 +#define SGP30_MEASURE_INTERVAL_HZ 1 +#define SGPC3_MEASURE_INTERVAL_HZ 2 +#define SGP_VERS_PRODUCT(data) ((((data)->feature_set) & 0xf000) >> 12) +#define SGP_VERS_RESERVED(data) ((((data)->feature_set) & 0x0800) >> 11) +#define SGP_VERS_GEN(data) ((((data)->feature_set) & 0x0600) >> 9) +#define SGP_VERS_ENG_BIT(data) ((((data)->feature_set) & 0x0100) >> 8) +#define SGP_VERS_MAJOR(data) ((((data)->feature_set) & 0x00e0) >> 5) +#define SGP_VERS_MINOR(data) (((data)->feature_set) & 0x001f) + +DECLARE_CRC8_TABLE(sgp_crc8_table); + +enum sgp_product_id { + SGP30 = 0, + SGPC3, +}; + +enum sgp30_channel_idx { + SGP30_IAQ_TVOC_IDX = 0, + SGP30_IAQ_CO2EQ_IDX, + SGP30_SIG_ETOH_IDX, + SGP30_SIG_H2_IDX, +}; + +enum sgpc3_channel_idx { + SGPC3_IAQ_TVOC_IDX = 10, + SGPC3_SIG_ETOH_IDX, +}; + +enum sgp_cmd { + SGP_CMD_IAQ_INIT = SGP_CMD(0x2003), + SGP_CMD_IAQ_MEASURE = SGP_CMD(0x2008), + SGP_CMD_GET_FEATURE_SET = SGP_CMD(0x202f), + SGP_CMD_GET_SERIAL_ID = SGP_CMD(0x3682), + + SGP30_CMD_MEASURE_SIGNAL = SGP_CMD(0x2050), + + SGPC3_CMD_MEASURE_RAW = SGP_CMD(0x2046), +}; + +struct sgp_version { + u8 major; + u8 minor; +}; + +struct sgp_crc_word { + __be16 value; + u8 crc8; +} __attribute__((__packed__)); + +union sgp_reading { + u8 start; + struct sgp_crc_word raw_words[4]; +}; + +enum _iaq_buffer_state { + IAQ_BUFFER_EMPTY = 0, + IAQ_BUFFER_DEFAULT_VALS, + IAQ_BUFFER_VALID, +}; + +struct sgp_data { + struct i2c_client *client; + struct task_struct *iaq_thread; + struct mutex data_lock; + unsigned long iaq_init_start_jiffies; + unsigned long iaq_defval_skip_jiffies; + u16 product_id; + u16 feature_set; + unsigned long measure_interval_jiffies; + enum sgp_cmd iaq_init_cmd; + enum sgp_cmd measure_iaq_cmd; + enum sgp_cmd measure_gas_signals_cmd; + union sgp_reading buffer; + union sgp_reading iaq_buffer; + enum _iaq_buffer_state iaq_buffer_state; +}; + +struct sgp_device { + const struct iio_chan_spec *channels; + int num_channels; +}; + +static const struct sgp_version supported_versions_sgp30[] = { + { + .major = 1, + .minor = 0, + }, +}; + +static const struct sgp_version supported_versions_sgpc3[] = { + { + .major = 0, + .minor = 4, + }, +}; + +static const struct iio_chan_spec sgp30_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = SGP30_IAQ_TVOC_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = SGP30_IAQ_CO2EQ_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_ETHANOL, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = SGP30_SIG_ETOH_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_H2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = SGP30_SIG_H2_IDX, + }, +}; + +static const struct iio_chan_spec sgpc3_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = SGPC3_IAQ_TVOC_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_ETHANOL, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = SGPC3_SIG_ETOH_IDX, + }, +}; + +static const struct sgp_device sgp_devices[] = { + [SGP30] = { + .channels = sgp30_channels, + .num_channels = ARRAY_SIZE(sgp30_channels), + }, + [SGPC3] = { + .channels = sgpc3_channels, + .num_channels = ARRAY_SIZE(sgpc3_channels), + }, +}; + +/** + * sgp_verify_buffer() - verify the checksums of the data buffer words + * + * @data: SGP data + * @buf: Raw data buffer + * @word_count: Num data words stored in the buffer, excluding CRC bytes + * + * Return: 0 on success, negative error otherwise. + */ +static int sgp_verify_buffer(const struct sgp_data *data, + union sgp_reading *buf, size_t word_count) +{ + size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN); + int i; + u8 crc; + u8 *data_buf = &buf->start; + + for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) { + crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN, + SGP_CRC8_INIT); + if (crc != data_buf[i + SGP_WORD_LEN]) { + dev_err(&data->client->dev, "CRC error\n"); + return -EIO; + } + } + + return 0; +} + +/** + * sgp_read_cmd() - reads data from sensor after issuing a command + * The caller must hold data->data_lock for the duration of the call. + * @data: SGP data + * @cmd: SGP Command to issue + * @buf: Raw data buffer to use + * @word_count: Num words to read, excluding CRC bytes + * @duration_us: Time taken to sensor to take a reading and data to be ready. + * + * Return: 0 on success, negative error otherwise. + */ +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd, + union sgp_reading *buf, size_t word_count, + unsigned long duration_us) +{ + int ret; + struct i2c_client *client = data->client; + size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN); + u8 *data_buf; + + ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN); + if (ret != SGP_CMD_LEN) + return -EIO; + usleep_range(duration_us, duration_us + 1000); + + if (word_count == 0) + return 0; + + data_buf = &buf->start; + ret = i2c_master_recv(client, data_buf, size); + if (ret < 0) + return ret; + if (ret != size) + return -EIO; + + return sgp_verify_buffer(data, buf, word_count); +} + +/** + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor + * The caller must hold data->data_lock for the duration of the call. + * @data: SGP data + * + * Return: 0 on success, -EBUSY on default values, negative error + * otherwise. + */ + +static int sgp_measure_iaq(struct sgp_data *data) +{ + int ret; + /* data contains default values */ + bool default_vals = !time_after(jiffies, data->iaq_init_start_jiffies + + data->iaq_defval_skip_jiffies); + + ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data->iaq_buffer, + SGP_MEASUREMENT_LEN, SGP_MEASUREMENT_DURATION_US); + if (ret < 0) + return ret; + + data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS; + + if (default_vals) + return -EBUSY; + + data->iaq_buffer_state = IAQ_BUFFER_VALID; + + return 0; +} + +static void sgp_iaq_thread_sleep_until(const struct sgp_data *data, + unsigned long sleep_jiffies) +{ + const long IAQ_POLL = 50000; + + while (!time_after(jiffies, sleep_jiffies)) { + usleep_range(IAQ_POLL, IAQ_POLL + 10000); + if (kthread_should_stop() || data->iaq_init_start_jiffies == 0) + return; + } +} + +static int sgp_iaq_threadfn(void *p) +{ + struct sgp_data *data = (struct sgp_data *)p; + unsigned long next_update_jiffies; + int ret; + + while (!kthread_should_stop()) { + mutex_lock(&data->data_lock); + if (data->iaq_init_start_jiffies == 0) { + ret = sgp_read_cmd(data, data->iaq_init_cmd, NULL, 0, + SGP_CMD_DURATION_US); + if (ret < 0) + goto unlock_sleep_continue; + data->iaq_init_start_jiffies = jiffies; + } + + ret = sgp_measure_iaq(data); + if (ret && ret != -EBUSY) { + dev_warn(&data->client->dev, + "IAQ measurement error [%d]\n", ret); + } +unlock_sleep_continue: + next_update_jiffies = jiffies + data->measure_interval_jiffies; + mutex_unlock(&data->data_lock); + sgp_iaq_thread_sleep_until(data, next_update_jiffies); + } + + return 0; +} + +static int sgp_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct sgp_data *data = iio_priv(indio_dev); + struct sgp_crc_word *words; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&data->data_lock); + if (data->iaq_buffer_state != IAQ_BUFFER_VALID) { + mutex_unlock(&data->data_lock); + return -EBUSY; + } + words = data->iaq_buffer.raw_words; + switch (chan->address) { + case SGP30_IAQ_TVOC_IDX: + case SGPC3_IAQ_TVOC_IDX: + *val = 0; + *val2 = be16_to_cpu(words[1].value); + ret = IIO_VAL_INT_PLUS_NANO; + break; + case SGP30_IAQ_CO2EQ_IDX: + *val = 0; + *val2 = be16_to_cpu(words[0].value); + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->data_lock); + break; + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->data_lock); + if (chan->address == SGPC3_SIG_ETOH_IDX) { + if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY) + ret = -EBUSY; + else + ret = 0; + words = data->iaq_buffer.raw_words; + } else { + ret = sgp_read_cmd(data, data->measure_gas_signals_cmd, + &data->buffer, SGP_MEASUREMENT_LEN, + SGP_MEASUREMENT_DURATION_US); + words = data->buffer.raw_words; + } + if (ret) { + mutex_unlock(&data->data_lock); + return ret; + } + + switch (chan->address) { + case SGP30_SIG_ETOH_IDX: + *val = be16_to_cpu(words[1].value); + ret = IIO_VAL_INT; + break; + case SGPC3_SIG_ETOH_IDX: + case SGP30_SIG_H2_IDX: + *val = be16_to_cpu(words[0].value); + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->data_lock); + break; + default: + return -EINVAL; + } + + return ret; +} + +static int sgp_check_compat(struct sgp_data *data, + unsigned int product_id) +{ + struct device *dev = &data->client->dev; + const struct sgp_version *supported_versions; + u16 ix, num_fs; + u16 product, generation, major, minor; + + /* driver does not match product */ + generation = SGP_VERS_GEN(data); + if (generation != 0) { + dev_err(dev, + "incompatible product generation %d != 0", generation); + return -ENODEV; + } + + product = SGP_VERS_PRODUCT(data); + if (product != product_id) { + dev_err(dev, "sensor reports a different product: 0x%04x\n", + product); + return -ENODEV; + } + + if (SGP_VERS_RESERVED(data)) + dev_warn(dev, "reserved bit is set\n"); + + /* engineering samples are not supported: no interface guarantees */ + if (SGP_VERS_ENG_BIT(data)) + return -ENODEV; + + switch (product) { + case SGP30: + supported_versions = supported_versions_sgp30; + num_fs = ARRAY_SIZE(supported_versions_sgp30); + break; + case SGPC3: + supported_versions = supported_versions_sgpc3; + num_fs = ARRAY_SIZE(supported_versions_sgpc3); + break; + default: + return -ENODEV; + } + + major = SGP_VERS_MAJOR(data); + minor = SGP_VERS_MINOR(data); + for (ix = 0; ix < num_fs; ix++) { + if (major == supported_versions[ix].major && + minor >= supported_versions[ix].minor) + return 0; + } + dev_err(dev, "unsupported sgp version: %d.%d\n", major, minor); + + return -ENODEV; +} + +static void sgp_init(struct sgp_data *data) +{ + data->iaq_init_cmd = SGP_CMD_IAQ_INIT; + data->iaq_init_start_jiffies = 0; + data->iaq_buffer_state = IAQ_BUFFER_EMPTY; + switch (SGP_VERS_PRODUCT(data)) { + case SGP30: + data->measure_interval_jiffies = SGP30_MEASURE_INTERVAL_HZ * HZ; + data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE; + data->measure_gas_signals_cmd = SGP30_CMD_MEASURE_SIGNAL; + data->product_id = SGP30; + data->iaq_defval_skip_jiffies = 15 * HZ; + break; + case SGPC3: + data->measure_interval_jiffies = SGPC3_MEASURE_INTERVAL_HZ * HZ; + data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW; + data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW; + data->product_id = SGPC3; + data->iaq_defval_skip_jiffies = + 43 * data->measure_interval_jiffies; + break; + } +} + +static const struct iio_info sgp_info = { + .read_raw = sgp_read_raw, +}; + +static const struct of_device_id sgp_dt_ids[] = { + { .compatible = "sensirion,sgp30", .data = (void *)SGP30 }, + { .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 }, + { } +}; + +static int sgp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct sgp_data *data; + unsigned long product_id; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + if (dev_fwnode(dev)) + product_id = (unsigned long)device_get_match_data(dev); + else + product_id = id->driver_data; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL); + mutex_init(&data->data_lock); + + /* get feature set version and write it to client data */ + ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data->buffer, 1, + SGP_CMD_DURATION_US); + if (ret < 0) + return ret; + + data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value); + + ret = sgp_check_compat(data, product_id); + if (ret) + return ret; + + indio_dev->info = &sgp_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = sgp_devices[product_id].channels; + indio_dev->num_channels = sgp_devices[product_id].num_channels; + + sgp_init(data); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) { + dev_err(dev, "failed to register iio device\n"); + return ret; + } + + data->iaq_thread = kthread_run(sgp_iaq_threadfn, data, + "%s-iaq", data->client->name); + + return 0; +} + +static void sgp_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct sgp_data *data = iio_priv(indio_dev); + + if (data->iaq_thread) + kthread_stop(data->iaq_thread); +} + +static const struct i2c_device_id sgp_id[] = { + { "sgp30", SGP30 }, + { "sgpc3", SGPC3 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, sgp_id); +MODULE_DEVICE_TABLE(of, sgp_dt_ids); + +static struct i2c_driver sgp_driver = { + .driver = { + .name = "sgp30", + .of_match_table = sgp_dt_ids, + }, + .probe = sgp_probe, + .remove = sgp_remove, + .id_table = sgp_id, +}; +module_i2c_driver(sgp_driver); + +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>"); +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>"); +MODULE_DESCRIPTION("Sensirion SGP gas sensors"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sgp40.c b/drivers/iio/chemical/sgp40.c new file mode 100644 index 000000000..8a56394ce --- /dev/null +++ b/drivers/iio/chemical/sgp40.c @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * sgp40.c - Support for Sensirion SGP40 Gas Sensor + * + * Copyright (C) 2021 Andreas Klinger <ak@it-klinger.de> + * + * I2C slave address: 0x59 + * + * Datasheet can be found here: + * https://www.sensirion.com/file/datasheet_sgp40 + * + * There are two functionalities supported: + * + * 1) read raw logarithmic resistance value from sensor + * --> useful to pass it to the algorithm of the sensor vendor for + * measuring deteriorations and improvements of air quality. + * + * 2) calculate an estimated absolute voc index (0 - 500 index points) for + * measuring the air quality. + * For this purpose the value of the resistance for which the voc index + * will be 250 can be set up using calibbias. + * + * Compensation values of relative humidity and temperature can be set up + * by writing to the out values of temp and humidityrelative. + */ + +#include <linux/delay.h> +#include <linux/crc8.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> + +/* + * floating point calculation of voc is done as integer + * where numbers are multiplied by 1 << SGP40_CALC_POWER + */ +#define SGP40_CALC_POWER 14 + +#define SGP40_CRC8_POLYNOMIAL 0x31 +#define SGP40_CRC8_INIT 0xff + +DECLARE_CRC8_TABLE(sgp40_crc8_table); + +struct sgp40_data { + struct device *dev; + struct i2c_client *client; + int rht; + int temp; + int res_calibbias; + /* Prevent concurrent access to rht, tmp, calibbias */ + struct mutex lock; +}; + +struct sgp40_tg_measure { + u8 command[2]; + __be16 rht_ticks; + u8 rht_crc; + __be16 temp_ticks; + u8 temp_crc; +} __packed; + +struct sgp40_tg_result { + __be16 res_ticks; + u8 res_crc; +} __packed; + +static const struct iio_chan_spec sgp40_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_CALIBBIAS), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .output = 1, + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .output = 1, + }, +}; + +/* + * taylor approximation of e^x: + * y = 1 + x + x^2 / 2 + x^3 / 6 + x^4 / 24 + ... + x^n / n! + * + * Because we are calculating x real value multiplied by 2^power we get + * an additional 2^power^n to divide for every element. For a reasonable + * precision this would overflow after a few iterations. Therefore we + * divide the x^n part whenever its about to overflow (xmax). + */ + +static u32 sgp40_exp(int exp, u32 power, u32 rounds) +{ + u32 x, y, xp; + u32 factorial, divider, xmax; + int sign = 1; + int i; + + if (exp == 0) + return 1 << power; + else if (exp < 0) { + sign = -1; + exp *= -1; + } + + xmax = 0x7FFFFFFF / exp; + x = exp; + xp = 1; + factorial = 1; + y = 1 << power; + divider = 0; + + for (i = 1; i <= rounds; i++) { + xp *= x; + factorial *= i; + y += (xp >> divider) / factorial; + divider += power; + /* divide when next multiplication would overflow */ + if (xp >= xmax) { + xp >>= power; + divider -= power; + } + } + + if (sign == -1) + return (1 << (power * 2)) / y; + else + return y; +} + +static int sgp40_calc_voc(struct sgp40_data *data, u16 resistance_raw, int *voc) +{ + int x; + u32 exp = 0; + + /* we calculate as a multiple of 16384 (2^14) */ + mutex_lock(&data->lock); + x = ((int)resistance_raw - data->res_calibbias) * 106; + mutex_unlock(&data->lock); + + /* voc = 500 / (1 + e^x) */ + exp = sgp40_exp(x, SGP40_CALC_POWER, 18); + *voc = 500 * ((1 << (SGP40_CALC_POWER * 2)) / ((1<<SGP40_CALC_POWER) + exp)); + + dev_dbg(data->dev, "raw: %d res_calibbias: %d x: %d exp: %d voc: %d\n", + resistance_raw, data->res_calibbias, x, exp, *voc); + + return 0; +} + +static int sgp40_measure_resistance_raw(struct sgp40_data *data, u16 *resistance_raw) +{ + int ret; + struct i2c_client *client = data->client; + u32 ticks; + u16 ticks16; + u8 crc; + struct sgp40_tg_measure tg = {.command = {0x26, 0x0F}}; + struct sgp40_tg_result tgres; + + mutex_lock(&data->lock); + + ticks = (data->rht / 10) * 65535 / 10000; + ticks16 = (u16)clamp(ticks, 0u, 65535u); /* clamp between 0 .. 100 %rH */ + tg.rht_ticks = cpu_to_be16(ticks16); + tg.rht_crc = crc8(sgp40_crc8_table, (u8 *)&tg.rht_ticks, 2, SGP40_CRC8_INIT); + + ticks = ((data->temp + 45000) / 10 ) * 65535 / 17500; + ticks16 = (u16)clamp(ticks, 0u, 65535u); /* clamp between -45 .. +130 °C */ + tg.temp_ticks = cpu_to_be16(ticks16); + tg.temp_crc = crc8(sgp40_crc8_table, (u8 *)&tg.temp_ticks, 2, SGP40_CRC8_INIT); + + mutex_unlock(&data->lock); + + ret = i2c_master_send(client, (const char *)&tg, sizeof(tg)); + if (ret != sizeof(tg)) { + dev_warn(data->dev, "i2c_master_send ret: %d sizeof: %zu\n", ret, sizeof(tg)); + return -EIO; + } + msleep(30); + + ret = i2c_master_recv(client, (u8 *)&tgres, sizeof(tgres)); + if (ret < 0) + return ret; + if (ret != sizeof(tgres)) { + dev_warn(data->dev, "i2c_master_recv ret: %d sizeof: %zu\n", ret, sizeof(tgres)); + return -EIO; + } + + crc = crc8(sgp40_crc8_table, (u8 *)&tgres.res_ticks, 2, SGP40_CRC8_INIT); + if (crc != tgres.res_crc) { + dev_err(data->dev, "CRC error while measure-raw\n"); + return -EIO; + } + + *resistance_raw = be16_to_cpu(tgres.res_ticks); + + return 0; +} + +static int sgp40_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct sgp40_data *data = iio_priv(indio_dev); + int ret, voc; + u16 resistance_raw; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_RESISTANCE: + ret = sgp40_measure_resistance_raw(data, &resistance_raw); + if (ret) + return ret; + + *val = resistance_raw; + return IIO_VAL_INT; + case IIO_TEMP: + mutex_lock(&data->lock); + *val = data->temp; + mutex_unlock(&data->lock); + return IIO_VAL_INT; + case IIO_HUMIDITYRELATIVE: + mutex_lock(&data->lock); + *val = data->rht; + mutex_unlock(&data->lock); + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_PROCESSED: + ret = sgp40_measure_resistance_raw(data, &resistance_raw); + if (ret) + return ret; + + ret = sgp40_calc_voc(data, resistance_raw, &voc); + if (ret) + return ret; + + *val = voc / (1 << SGP40_CALC_POWER); + /* + * calculation should fit into integer, where: + * voc <= (500 * 2^SGP40_CALC_POWER) = 8192000 + * (with SGP40_CALC_POWER = 14) + */ + *val2 = ((voc % (1 << SGP40_CALC_POWER)) * 244) / (1 << (SGP40_CALC_POWER - 12)); + dev_dbg(data->dev, "voc: %d val: %d.%06d\n", voc, *val, *val2); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + mutex_lock(&data->lock); + *val = data->res_calibbias; + mutex_unlock(&data->lock); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int sgp40_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct sgp40_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + if ((val < -45000) || (val > 130000)) + return -EINVAL; + + mutex_lock(&data->lock); + data->temp = val; + mutex_unlock(&data->lock); + return 0; + case IIO_HUMIDITYRELATIVE: + if ((val < 0) || (val > 100000)) + return -EINVAL; + + mutex_lock(&data->lock); + data->rht = val; + mutex_unlock(&data->lock); + return 0; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_CALIBBIAS: + if ((val < 20000) || (val > 52768)) + return -EINVAL; + + mutex_lock(&data->lock); + data->res_calibbias = val; + mutex_unlock(&data->lock); + return 0; + } + return -EINVAL; +} + +static const struct iio_info sgp40_info = { + .read_raw = sgp40_read_raw, + .write_raw = sgp40_write_raw, +}; + +static int sgp40_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct sgp40_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + data->dev = dev; + + crc8_populate_msb(sgp40_crc8_table, SGP40_CRC8_POLYNOMIAL); + + mutex_init(&data->lock); + + /* set default values */ + data->rht = 50000; /* 50 % */ + data->temp = 25000; /* 25 °C */ + data->res_calibbias = 30000; /* resistance raw value for voc index of 250 */ + + indio_dev->info = &sgp40_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = sgp40_channels; + indio_dev->num_channels = ARRAY_SIZE(sgp40_channels); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + dev_err(dev, "failed to register iio device\n"); + + return ret; +} + +static const struct i2c_device_id sgp40_id[] = { + { "sgp40" }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, sgp40_id); + +static const struct of_device_id sgp40_dt_ids[] = { + { .compatible = "sensirion,sgp40" }, + { } +}; + +MODULE_DEVICE_TABLE(of, sgp40_dt_ids); + +static struct i2c_driver sgp40_driver = { + .driver = { + .name = "sgp40", + .of_match_table = sgp40_dt_ids, + }, + .probe = sgp40_probe, + .id_table = sgp40_id, +}; +module_i2c_driver(sgp40_driver); + +MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>"); +MODULE_DESCRIPTION("Sensirion SGP40 gas sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c new file mode 100644 index 000000000..814ce0aad --- /dev/null +++ b/drivers/iio/chemical/sps30.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SPS30 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + */ + +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "sps30.h" + +/* sensor measures reliably up to 3000 ug / m3 */ +#define SPS30_MAX_PM 3000 +/* minimum and maximum self cleaning periods in seconds */ +#define SPS30_AUTO_CLEANING_PERIOD_MIN 0 +#define SPS30_AUTO_CLEANING_PERIOD_MAX 604800 + +enum { + PM1, + PM2P5, + PM4, + PM10, +}; + +enum { + RESET, + MEASURING, +}; + +static s32 sps30_float_to_int_clamped(__be32 *fp) +{ + int val = be32_to_cpup(fp); + int mantissa = val & GENMASK(22, 0); + /* this is fine since passed float is always non-negative */ + int exp = val >> 23; + int fraction, shift; + + /* special case 0 */ + if (!exp && !mantissa) + return 0; + + exp -= 127; + if (exp < 0) { + /* return values ranging from 1 to 99 */ + return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp); + } + + /* return values ranging from 100 to 300000 */ + shift = 23 - exp; + val = (1 << exp) + (mantissa >> shift); + if (val >= SPS30_MAX_PM) + return SPS30_MAX_PM * 100; + + fraction = mantissa & GENMASK(shift - 1, 0); + + return val * 100 + ((fraction * 100) >> shift); +} + +static int sps30_do_meas(struct sps30_state *state, s32 *data, int size) +{ + int i, ret; + + if (state->state == RESET) { + ret = state->ops->start_meas(state); + if (ret) + return ret; + + state->state = MEASURING; + } + + ret = state->ops->read_meas(state, (__be32 *)data, size); + if (ret) + return ret; + + for (i = 0; i < size; i++) + data[i] = sps30_float_to_int_clamped((__be32 *)&data[i]); + + return 0; +} + +static int sps30_do_reset(struct sps30_state *state) +{ + int ret; + + ret = state->ops->reset(state); + if (ret) + return ret; + + state->state = RESET; + + return 0; +} + +static irqreturn_t sps30_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct sps30_state *state = iio_priv(indio_dev); + int ret; + struct { + s32 data[4]; /* PM1, PM2P5, PM4, PM10 */ + s64 ts; + } scan; + + mutex_lock(&state->lock); + ret = sps30_do_meas(state, scan.data, ARRAY_SIZE(scan.data)); + mutex_unlock(&state->lock); + if (ret) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, &scan, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int sps30_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct sps30_state *state = iio_priv(indio_dev); + int data[4], ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + /* read up to the number of bytes actually needed */ + switch (chan->channel2) { + case IIO_MOD_PM1: + ret = sps30_do_meas(state, data, 1); + break; + case IIO_MOD_PM2P5: + ret = sps30_do_meas(state, data, 2); + break; + case IIO_MOD_PM4: + ret = sps30_do_meas(state, data, 3); + break; + case IIO_MOD_PM10: + ret = sps30_do_meas(state, data, 4); + break; + } + mutex_unlock(&state->lock); + if (ret) + return ret; + + *val = data[chan->address] / 100; + *val2 = (data[chan->address] % 100) * 10000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + switch (chan->channel2) { + case IIO_MOD_PM1: + case IIO_MOD_PM2P5: + case IIO_MOD_PM4: + case IIO_MOD_PM10: + *val = 0; + *val2 = 10000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static ssize_t start_cleaning_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct sps30_state *state = iio_priv(indio_dev); + int val, ret; + + if (kstrtoint(buf, 0, &val) || val != 1) + return -EINVAL; + + mutex_lock(&state->lock); + ret = state->ops->clean_fan(state); + mutex_unlock(&state->lock); + if (ret) + return ret; + + return len; +} + +static ssize_t cleaning_period_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct sps30_state *state = iio_priv(indio_dev); + __be32 val; + int ret; + + mutex_lock(&state->lock); + ret = state->ops->read_cleaning_period(state, &val); + mutex_unlock(&state->lock); + if (ret) + return ret; + + return sysfs_emit(buf, "%d\n", be32_to_cpu(val)); +} + +static ssize_t cleaning_period_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct sps30_state *state = iio_priv(indio_dev); + int val, ret; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + if ((val < SPS30_AUTO_CLEANING_PERIOD_MIN) || + (val > SPS30_AUTO_CLEANING_PERIOD_MAX)) + return -EINVAL; + + mutex_lock(&state->lock); + ret = state->ops->write_cleaning_period(state, cpu_to_be32(val)); + if (ret) { + mutex_unlock(&state->lock); + return ret; + } + + msleep(20); + + /* + * sensor requires reset in order to return up to date self cleaning + * period + */ + ret = sps30_do_reset(state); + if (ret) + dev_warn(dev, + "period changed but reads will return the old value\n"); + + mutex_unlock(&state->lock); + + return len; +} + +static ssize_t cleaning_period_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "[%d %d %d]\n", + SPS30_AUTO_CLEANING_PERIOD_MIN, 1, + SPS30_AUTO_CLEANING_PERIOD_MAX); +} + +static IIO_DEVICE_ATTR_WO(start_cleaning, 0); +static IIO_DEVICE_ATTR_RW(cleaning_period, 0); +static IIO_DEVICE_ATTR_RO(cleaning_period_available, 0); + +static struct attribute *sps30_attrs[] = { + &iio_dev_attr_start_cleaning.dev_attr.attr, + &iio_dev_attr_cleaning_period.dev_attr.attr, + &iio_dev_attr_cleaning_period_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group sps30_attr_group = { + .attrs = sps30_attrs, +}; + +static const struct iio_info sps30_info = { + .attrs = &sps30_attr_group, + .read_raw = sps30_read_raw, +}; + +#define SPS30_CHAN(_index, _mod) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .address = _mod, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 19, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec sps30_channels[] = { + SPS30_CHAN(0, PM1), + SPS30_CHAN(1, PM2P5), + SPS30_CHAN(2, PM4), + SPS30_CHAN(3, PM10), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static void sps30_devm_stop_meas(void *data) +{ + struct sps30_state *state = data; + + if (state->state == MEASURING) + state->ops->stop_meas(state); +} + +static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 }; + +int sps30_probe(struct device *dev, const char *name, void *priv, const struct sps30_ops *ops) +{ + struct iio_dev *indio_dev; + struct sps30_state *state; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + dev_set_drvdata(dev, indio_dev); + + state = iio_priv(indio_dev); + state->dev = dev; + state->priv = priv; + state->ops = ops; + mutex_init(&state->lock); + + indio_dev->info = &sps30_info; + indio_dev->name = name; + indio_dev->channels = sps30_channels; + indio_dev->num_channels = ARRAY_SIZE(sps30_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = sps30_scan_masks; + + ret = sps30_do_reset(state); + if (ret) { + dev_err(dev, "failed to reset device\n"); + return ret; + } + + ret = state->ops->show_info(state); + if (ret) { + dev_err(dev, "failed to read device info\n"); + return ret; + } + + ret = devm_add_action_or_reset(dev, sps30_devm_stop_meas, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + sps30_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS_GPL(sps30_probe, IIO_SPS30); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sps30.h b/drivers/iio/chemical/sps30.h new file mode 100644 index 000000000..a58ee43cf --- /dev/null +++ b/drivers/iio/chemical/sps30.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _SPS30_H +#define _SPS30_H + +#include <linux/types.h> + +struct sps30_state; +struct sps30_ops { + int (*start_meas)(struct sps30_state *state); + int (*stop_meas)(struct sps30_state *state); + int (*read_meas)(struct sps30_state *state, __be32 *meas, size_t num); + int (*reset)(struct sps30_state *state); + int (*clean_fan)(struct sps30_state *state); + int (*read_cleaning_period)(struct sps30_state *state, __be32 *period); + int (*write_cleaning_period)(struct sps30_state *state, __be32 period); + int (*show_info)(struct sps30_state *state); +}; + +struct sps30_state { + /* serialize access to the device */ + struct mutex lock; + struct device *dev; + int state; + /* + * priv pointer is solely for serdev driver private data. We keep it + * here because driver_data inside dev has been already used for iio and + * struct serdev_device doesn't have one. + */ + void *priv; + const struct sps30_ops *ops; +}; + +int sps30_probe(struct device *dev, const char *name, void *priv, const struct sps30_ops *ops); + +#endif diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c new file mode 100644 index 000000000..2aed483a2 --- /dev/null +++ b/drivers/iio/chemical/sps30_i2c.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SPS30 particulate matter sensor i2c driver + * + * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com> + * + * I2C slave address: 0x69 + */ +#include <asm/unaligned.h> +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/types.h> + +#include "sps30.h" + +#define SPS30_I2C_CRC8_POLYNOMIAL 0x31 +/* max number of bytes needed to store PM measurements or serial string */ +#define SPS30_I2C_MAX_BUF_SIZE 48 + +DECLARE_CRC8_TABLE(sps30_i2c_crc8_table); + +#define SPS30_I2C_START_MEAS 0x0010 +#define SPS30_I2C_STOP_MEAS 0x0104 +#define SPS30_I2C_READ_MEAS 0x0300 +#define SPS30_I2C_MEAS_READY 0x0202 +#define SPS30_I2C_RESET 0xd304 +#define SPS30_I2C_CLEAN_FAN 0x5607 +#define SPS30_I2C_PERIOD 0x8004 +#define SPS30_I2C_READ_SERIAL 0xd033 +#define SPS30_I2C_READ_VERSION 0xd100 + +static int sps30_i2c_xfer(struct sps30_state *state, unsigned char *txbuf, size_t txsize, + unsigned char *rxbuf, size_t rxsize) +{ + struct i2c_client *client = to_i2c_client(state->dev); + int ret; + + /* + * Sensor does not support repeated start so instead of + * sending two i2c messages in a row we just send one by one. + */ + ret = i2c_master_send(client, txbuf, txsize); + if (ret < 0) + return ret; + if (ret != txsize) + return -EIO; + + if (!rxsize) + return 0; + + ret = i2c_master_recv(client, rxbuf, rxsize); + if (ret < 0) + return ret; + if (ret != rxsize) + return -EIO; + + return 0; +} + +static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size_t arg_size, + void *rsp, size_t rsp_size) +{ + /* + * Internally sensor stores measurements in a following manner: + * + * PM1: upper two bytes, crc8, lower two bytes, crc8 + * PM2P5: upper two bytes, crc8, lower two bytes, crc8 + * PM4: upper two bytes, crc8, lower two bytes, crc8 + * PM10: upper two bytes, crc8, lower two bytes, crc8 + * + * What follows next are number concentration measurements and + * typical particle size measurement which we omit. + */ + unsigned char buf[SPS30_I2C_MAX_BUF_SIZE]; + unsigned char *tmp; + unsigned char crc; + size_t i; + int ret; + + put_unaligned_be16(cmd, buf); + i = 2; + + if (rsp) { + /* each two bytes are followed by a crc8 */ + rsp_size += rsp_size / 2; + } else { + tmp = arg; + + while (arg_size) { + buf[i] = *tmp++; + buf[i + 1] = *tmp++; + buf[i + 2] = crc8(sps30_i2c_crc8_table, buf + i, 2, CRC8_INIT_VALUE); + arg_size -= 2; + i += 3; + } + } + + ret = sps30_i2c_xfer(state, buf, i, buf, rsp_size); + if (ret) + return ret; + + /* validate received data and strip off crc bytes */ + tmp = rsp; + for (i = 0; i < rsp_size; i += 3) { + crc = crc8(sps30_i2c_crc8_table, buf + i, 2, CRC8_INIT_VALUE); + if (crc != buf[i + 2]) { + dev_err(state->dev, "data integrity check failed\n"); + return -EIO; + } + + *tmp++ = buf[i]; + *tmp++ = buf[i + 1]; + } + + return 0; +} + +static int sps30_i2c_start_meas(struct sps30_state *state) +{ + /* request BE IEEE754 formatted data */ + unsigned char buf[] = { 0x03, 0x00 }; + + return sps30_i2c_command(state, SPS30_I2C_START_MEAS, buf, sizeof(buf), NULL, 0); +} + +static int sps30_i2c_stop_meas(struct sps30_state *state) +{ + return sps30_i2c_command(state, SPS30_I2C_STOP_MEAS, NULL, 0, NULL, 0); +} + +static int sps30_i2c_reset(struct sps30_state *state) +{ + int ret; + + ret = sps30_i2c_command(state, SPS30_I2C_RESET, NULL, 0, NULL, 0); + msleep(500); + /* + * Power-on-reset causes sensor to produce some glitch on i2c bus and + * some controllers end up in error state. Recover simply by placing + * some data on the bus, for example STOP_MEAS command, which + * is NOP in this case. + */ + sps30_i2c_stop_meas(state); + + return ret; +} + +static bool sps30_i2c_meas_ready(struct sps30_state *state) +{ + unsigned char buf[2]; + int ret; + + ret = sps30_i2c_command(state, SPS30_I2C_MEAS_READY, NULL, 0, buf, sizeof(buf)); + if (ret) + return false; + + return buf[1]; +} + +static int sps30_i2c_read_meas(struct sps30_state *state, __be32 *meas, size_t num) +{ + /* measurements are ready within a second */ + if (msleep_interruptible(1000)) + return -EINTR; + + if (!sps30_i2c_meas_ready(state)) + return -ETIMEDOUT; + + return sps30_i2c_command(state, SPS30_I2C_READ_MEAS, NULL, 0, meas, sizeof(num) * num); +} + +static int sps30_i2c_clean_fan(struct sps30_state *state) +{ + return sps30_i2c_command(state, SPS30_I2C_CLEAN_FAN, NULL, 0, NULL, 0); +} + +static int sps30_i2c_read_cleaning_period(struct sps30_state *state, __be32 *period) +{ + return sps30_i2c_command(state, SPS30_I2C_PERIOD, NULL, 0, period, sizeof(*period)); +} + +static int sps30_i2c_write_cleaning_period(struct sps30_state *state, __be32 period) +{ + return sps30_i2c_command(state, SPS30_I2C_PERIOD, &period, sizeof(period), NULL, 0); +} + +static int sps30_i2c_show_info(struct sps30_state *state) +{ + /* extra nul just in case */ + unsigned char buf[32 + 1] = { 0x00 }; + int ret; + + ret = sps30_i2c_command(state, SPS30_I2C_READ_SERIAL, NULL, 0, buf, sizeof(buf) - 1); + if (ret) + return ret; + + dev_info(state->dev, "serial number: %s\n", buf); + + ret = sps30_i2c_command(state, SPS30_I2C_READ_VERSION, NULL, 0, buf, 2); + if (ret) + return ret; + + dev_info(state->dev, "fw version: %u.%u\n", buf[0], buf[1]); + + return 0; +} + +static const struct sps30_ops sps30_i2c_ops = { + .start_meas = sps30_i2c_start_meas, + .stop_meas = sps30_i2c_stop_meas, + .read_meas = sps30_i2c_read_meas, + .reset = sps30_i2c_reset, + .clean_fan = sps30_i2c_clean_fan, + .read_cleaning_period = sps30_i2c_read_cleaning_period, + .write_cleaning_period = sps30_i2c_write_cleaning_period, + .show_info = sps30_i2c_show_info, +}; + +static int sps30_i2c_probe(struct i2c_client *client) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + crc8_populate_msb(sps30_i2c_crc8_table, SPS30_I2C_CRC8_POLYNOMIAL); + + return sps30_probe(&client->dev, client->name, NULL, &sps30_i2c_ops); +} + +static const struct i2c_device_id sps30_i2c_id[] = { + { "sps30" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sps30_i2c_id); + +static const struct of_device_id sps30_i2c_of_match[] = { + { .compatible = "sensirion,sps30" }, + { } +}; +MODULE_DEVICE_TABLE(of, sps30_i2c_of_match); + +static struct i2c_driver sps30_i2c_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = sps30_i2c_of_match, + }, + .id_table = sps30_i2c_id, + .probe_new = sps30_i2c_probe, +}; +module_i2c_driver(sps30_i2c_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>"); +MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor i2c driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_SPS30); diff --git a/drivers/iio/chemical/sps30_serial.c b/drivers/iio/chemical/sps30_serial.c new file mode 100644 index 000000000..164f4b3e0 --- /dev/null +++ b/drivers/iio/chemical/sps30_serial.c @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SPS30 particulate matter sensor serial driver + * + * Copyright (c) 2021 Tomasz Duszynski <tomasz.duszynski@octakon.com> + */ +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/iio.h> +#include <linux/minmax.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/serdev.h> +#include <linux/types.h> + +#include "sps30.h" + +#define SPS30_SERIAL_DEV_NAME "sps30" + +#define SPS30_SERIAL_SOF_EOF 0x7e +#define SPS30_SERIAL_TIMEOUT msecs_to_jiffies(20) +#define SPS30_SERIAL_MAX_BUF_SIZE 263 +#define SPS30_SERIAL_ESCAPE_CHAR 0x7d + +#define SPS30_SERIAL_FRAME_MIN_SIZE 7 +#define SPS30_SERIAL_FRAME_ADR_OFFSET 1 +#define SPS30_SERIAL_FRAME_CMD_OFFSET 2 +#define SPS30_SERIAL_FRAME_MOSI_LEN_OFFSET 3 +#define SPS30_SERIAL_FRAME_MISO_STATE_OFFSET 3 +#define SPS30_SERIAL_FRAME_MISO_LEN_OFFSET 4 +#define SPS30_SERIAL_FRAME_MISO_DATA_OFFSET 5 + +#define SPS30_SERIAL_START_MEAS 0x00 +#define SPS30_SERIAL_STOP_MEAS 0x01 +#define SPS30_SERIAL_READ_MEAS 0x03 +#define SPS30_SERIAL_RESET 0xd3 +#define SPS30_SERIAL_CLEAN_FAN 0x56 +#define SPS30_SERIAL_PERIOD 0x80 +#define SPS30_SERIAL_DEV_INFO 0xd0 +#define SPS30_SERIAL_READ_VERSION 0xd1 + +struct sps30_serial_priv { + struct completion new_frame; + unsigned char buf[SPS30_SERIAL_MAX_BUF_SIZE]; + size_t num; + bool escaped; + bool done; +}; + +static int sps30_serial_xfer(struct sps30_state *state, const unsigned char *buf, size_t size) +{ + struct serdev_device *serdev = to_serdev_device(state->dev); + struct sps30_serial_priv *priv = state->priv; + int ret; + + priv->num = 0; + priv->escaped = false; + priv->done = false; + + ret = serdev_device_write(serdev, buf, size, SPS30_SERIAL_TIMEOUT); + if (ret < 0) + return ret; + if (ret != size) + return -EIO; + + ret = wait_for_completion_interruptible_timeout(&priv->new_frame, SPS30_SERIAL_TIMEOUT); + if (ret < 0) + return ret; + if (!ret) + return -ETIMEDOUT; + + return 0; +} + +static const struct { + unsigned char byte; + unsigned char byte2; +} sps30_serial_bytes[] = { + { 0x11, 0x31 }, + { 0x13, 0x33 }, + { 0x7e, 0x5e }, + { 0x7d, 0x5d }, +}; + +static int sps30_serial_put_byte(unsigned char *buf, unsigned char byte) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sps30_serial_bytes); i++) { + if (sps30_serial_bytes[i].byte != byte) + continue; + + buf[0] = SPS30_SERIAL_ESCAPE_CHAR; + buf[1] = sps30_serial_bytes[i].byte2; + + return 2; + } + + buf[0] = byte; + + return 1; +} + +static char sps30_serial_get_byte(bool escaped, unsigned char byte2) +{ + int i; + + if (!escaped) + return byte2; + + for (i = 0; i < ARRAY_SIZE(sps30_serial_bytes); i++) { + if (sps30_serial_bytes[i].byte2 != byte2) + continue; + + return sps30_serial_bytes[i].byte; + } + + return 0; +} + +static unsigned char sps30_serial_calc_chksum(const unsigned char *buf, size_t num) +{ + unsigned int chksum = 0; + size_t i; + + for (i = 0; i < num; i++) + chksum += buf[i]; + + return ~chksum; +} + +static int sps30_serial_prep_frame(unsigned char *buf, unsigned char cmd, + const unsigned char *arg, size_t arg_size) +{ + unsigned char chksum; + int num = 0; + size_t i; + + buf[num++] = SPS30_SERIAL_SOF_EOF; + buf[num++] = 0; + num += sps30_serial_put_byte(buf + num, cmd); + num += sps30_serial_put_byte(buf + num, arg_size); + + for (i = 0; i < arg_size; i++) + num += sps30_serial_put_byte(buf + num, arg[i]); + + /* SOF isn't checksummed */ + chksum = sps30_serial_calc_chksum(buf + 1, num - 1); + num += sps30_serial_put_byte(buf + num, chksum); + buf[num++] = SPS30_SERIAL_SOF_EOF; + + return num; +} + +static bool sps30_serial_frame_valid(struct sps30_state *state, const unsigned char *buf) +{ + struct sps30_serial_priv *priv = state->priv; + unsigned char chksum; + + if ((priv->num < SPS30_SERIAL_FRAME_MIN_SIZE) || + (priv->num != SPS30_SERIAL_FRAME_MIN_SIZE + + priv->buf[SPS30_SERIAL_FRAME_MISO_LEN_OFFSET])) { + dev_err(state->dev, "frame has invalid number of bytes\n"); + return false; + } + + if ((priv->buf[SPS30_SERIAL_FRAME_ADR_OFFSET] != buf[SPS30_SERIAL_FRAME_ADR_OFFSET]) || + (priv->buf[SPS30_SERIAL_FRAME_CMD_OFFSET] != buf[SPS30_SERIAL_FRAME_CMD_OFFSET])) { + dev_err(state->dev, "frame has wrong ADR and CMD bytes\n"); + return false; + } + + if (priv->buf[SPS30_SERIAL_FRAME_MISO_STATE_OFFSET]) { + dev_err(state->dev, "frame with non-zero state received (0x%02x)\n", + priv->buf[SPS30_SERIAL_FRAME_MISO_STATE_OFFSET]); + return false; + } + + /* SOF, checksum and EOF are not checksummed */ + chksum = sps30_serial_calc_chksum(priv->buf + 1, priv->num - 3); + if (priv->buf[priv->num - 2] != chksum) { + dev_err(state->dev, "frame integrity check failed\n"); + return false; + } + + return true; +} + +static int sps30_serial_command(struct sps30_state *state, unsigned char cmd, + const void *arg, size_t arg_size, void *rsp, size_t rsp_size) +{ + struct sps30_serial_priv *priv = state->priv; + unsigned char buf[SPS30_SERIAL_MAX_BUF_SIZE]; + int ret, size; + + size = sps30_serial_prep_frame(buf, cmd, arg, arg_size); + ret = sps30_serial_xfer(state, buf, size); + if (ret) + return ret; + + if (!sps30_serial_frame_valid(state, buf)) + return -EIO; + + if (rsp) { + rsp_size = min_t(size_t, priv->buf[SPS30_SERIAL_FRAME_MISO_LEN_OFFSET], rsp_size); + memcpy(rsp, &priv->buf[SPS30_SERIAL_FRAME_MISO_DATA_OFFSET], rsp_size); + } + + return rsp_size; +} + +static int sps30_serial_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + struct iio_dev *indio_dev = dev_get_drvdata(&serdev->dev); + struct sps30_serial_priv *priv; + struct sps30_state *state; + unsigned char byte; + size_t i; + + if (!indio_dev) + return 0; + + state = iio_priv(indio_dev); + priv = state->priv; + + /* just in case device put some unexpected data on the bus */ + if (priv->done) + return size; + + /* wait for the start of frame */ + if (!priv->num && size && buf[0] != SPS30_SERIAL_SOF_EOF) + return 1; + + if (priv->num + size >= ARRAY_SIZE(priv->buf)) + size = ARRAY_SIZE(priv->buf) - priv->num; + + for (i = 0; i < size; i++) { + byte = buf[i]; + /* remove stuffed bytes on-the-fly */ + if (byte == SPS30_SERIAL_ESCAPE_CHAR) { + priv->escaped = true; + continue; + } + + byte = sps30_serial_get_byte(priv->escaped, byte); + if (priv->escaped && !byte) + dev_warn(state->dev, "unrecognized escaped char (0x%02x)\n", byte); + + priv->buf[priv->num++] = byte; + + /* EOF received */ + if (!priv->escaped && byte == SPS30_SERIAL_SOF_EOF) { + if (priv->num < SPS30_SERIAL_FRAME_MIN_SIZE) + continue; + + priv->done = true; + complete(&priv->new_frame); + i++; + break; + } + + priv->escaped = false; + } + + return i; +} + +static const struct serdev_device_ops sps30_serial_device_ops = { + .receive_buf = sps30_serial_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static int sps30_serial_start_meas(struct sps30_state *state) +{ + /* request BE IEEE754 formatted data */ + unsigned char buf[] = { 0x01, 0x03 }; + + return sps30_serial_command(state, SPS30_SERIAL_START_MEAS, buf, sizeof(buf), NULL, 0); +} + +static int sps30_serial_stop_meas(struct sps30_state *state) +{ + return sps30_serial_command(state, SPS30_SERIAL_STOP_MEAS, NULL, 0, NULL, 0); +} + +static int sps30_serial_reset(struct sps30_state *state) +{ + int ret; + + ret = sps30_serial_command(state, SPS30_SERIAL_RESET, NULL, 0, NULL, 0); + msleep(500); + + return ret; +} + +static int sps30_serial_read_meas(struct sps30_state *state, __be32 *meas, size_t num) +{ + int ret; + + /* measurements are ready within a second */ + if (msleep_interruptible(1000)) + return -EINTR; + + ret = sps30_serial_command(state, SPS30_SERIAL_READ_MEAS, NULL, 0, meas, num * sizeof(num)); + if (ret < 0) + return ret; + /* if measurements aren't ready sensor returns empty frame */ + if (ret == SPS30_SERIAL_FRAME_MIN_SIZE) + return -ETIMEDOUT; + if (ret != num * sizeof(*meas)) + return -EIO; + + return 0; +} + +static int sps30_serial_clean_fan(struct sps30_state *state) +{ + return sps30_serial_command(state, SPS30_SERIAL_CLEAN_FAN, NULL, 0, NULL, 0); +} + +static int sps30_serial_read_cleaning_period(struct sps30_state *state, __be32 *period) +{ + unsigned char buf[] = { 0x00 }; + int ret; + + ret = sps30_serial_command(state, SPS30_SERIAL_PERIOD, buf, sizeof(buf), + period, sizeof(*period)); + if (ret < 0) + return ret; + if (ret != sizeof(*period)) + return -EIO; + + return 0; +} + +static int sps30_serial_write_cleaning_period(struct sps30_state *state, __be32 period) +{ + unsigned char buf[5] = { 0x00 }; + + memcpy(buf + 1, &period, sizeof(period)); + + return sps30_serial_command(state, SPS30_SERIAL_PERIOD, buf, sizeof(buf), NULL, 0); +} + +static int sps30_serial_show_info(struct sps30_state *state) +{ + /* + * tell device do return serial number and add extra nul byte just in case + * serial number isn't a valid string + */ + unsigned char buf[32 + 1] = { 0x03 }; + struct device *dev = state->dev; + int ret; + + ret = sps30_serial_command(state, SPS30_SERIAL_DEV_INFO, buf, 1, buf, sizeof(buf) - 1); + if (ret < 0) + return ret; + if (ret != sizeof(buf) - 1) + return -EIO; + + dev_info(dev, "serial number: %s\n", buf); + + ret = sps30_serial_command(state, SPS30_SERIAL_READ_VERSION, NULL, 0, buf, sizeof(buf) - 1); + if (ret < 0) + return ret; + if (ret < 2) + return -EIO; + + dev_info(dev, "fw version: %u.%u\n", buf[0], buf[1]); + + return 0; +} + +static const struct sps30_ops sps30_serial_ops = { + .start_meas = sps30_serial_start_meas, + .stop_meas = sps30_serial_stop_meas, + .read_meas = sps30_serial_read_meas, + .reset = sps30_serial_reset, + .clean_fan = sps30_serial_clean_fan, + .read_cleaning_period = sps30_serial_read_cleaning_period, + .write_cleaning_period = sps30_serial_write_cleaning_period, + .show_info = sps30_serial_show_info, +}; + +static int sps30_serial_probe(struct serdev_device *serdev) +{ + struct device *dev = &serdev->dev; + struct sps30_serial_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + init_completion(&priv->new_frame); + serdev_device_set_client_ops(serdev, &sps30_serial_device_ops); + + ret = devm_serdev_device_open(dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, 115200); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return ret; + + return sps30_probe(dev, SPS30_SERIAL_DEV_NAME, priv, &sps30_serial_ops); +} + +static const struct of_device_id sps30_serial_of_match[] = { + { .compatible = "sensirion,sps30" }, + { } +}; +MODULE_DEVICE_TABLE(of, sps30_serial_of_match); + +static struct serdev_device_driver sps30_serial_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = sps30_serial_of_match, + }, + .probe = sps30_serial_probe, +}; +module_serdev_device_driver(sps30_serial_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>"); +MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor serial driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_SPS30); diff --git a/drivers/iio/chemical/sunrise_co2.c b/drivers/iio/chemical/sunrise_co2.c new file mode 100644 index 000000000..8440dc0c7 --- /dev/null +++ b/drivers/iio/chemical/sunrise_co2.c @@ -0,0 +1,537 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Senseair Sunrise 006-0-0007 CO2 sensor driver. + * + * Copyright (C) 2021 Jacopo Mondi + * + * List of features not yet supported by the driver: + * - controllable EN pin + * - single-shot operations using the nDRY pin. + * - ABC/target calibration + */ + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/time64.h> + +#include <linux/iio/iio.h> + +#define DRIVER_NAME "sunrise_co2" + +#define SUNRISE_ERROR_STATUS_REG 0x00 +#define SUNRISE_CO2_FILTERED_COMP_REG 0x06 +#define SUNRISE_CHIP_TEMPERATURE_REG 0x08 +#define SUNRISE_CALIBRATION_STATUS_REG 0x81 +#define SUNRISE_CALIBRATION_COMMAND_REG 0x82 +#define SUNRISE_CALIBRATION_FACTORY_CMD 0x7c02 +#define SUNRISE_CALIBRATION_BACKGROUND_CMD 0x7c06 +/* + * The calibration timeout is not characterized in the datasheet. + * Use 30 seconds as a reasonable upper limit. + */ +#define SUNRISE_CALIBRATION_TIMEOUT_US (30 * USEC_PER_SEC) + +struct sunrise_dev { + struct i2c_client *client; + struct regmap *regmap; + /* Protects access to IIO attributes. */ + struct mutex lock; + bool ignore_nak; +}; + +/* Custom regmap read/write operations: perform unlocked access to the i2c bus. */ + +static int sunrise_regmap_read(void *context, const void *reg_buf, + size_t reg_size, void *val_buf, size_t val_size) +{ + struct i2c_client *client = context; + struct sunrise_dev *sunrise = i2c_get_clientdata(client); + union i2c_smbus_data data; + int ret; + + if (reg_size != 1 || !val_size) + return -EINVAL; + + memset(&data, 0, sizeof(data)); + data.block[0] = val_size; + + /* + * Wake up sensor by sending sensor address: START, sensor address, + * STOP. Sensor will not ACK this byte. + * + * The chip enters a low power state after 15ms without + * communications or after a complete read/write sequence. + */ + __i2c_smbus_xfer(client->adapter, client->addr, + sunrise->ignore_nak ? I2C_M_IGNORE_NAK : 0, + I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE_DATA, &data); + + usleep_range(500, 1500); + + ret = __i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, ((u8 *)reg_buf)[0], + I2C_SMBUS_I2C_BLOCK_DATA, &data); + if (ret < 0) + return ret; + + memcpy(val_buf, &data.block[1], data.block[0]); + + return 0; +} + +static int sunrise_regmap_write(void *context, const void *val_buf, size_t count) +{ + struct i2c_client *client = context; + struct sunrise_dev *sunrise = i2c_get_clientdata(client); + union i2c_smbus_data data; + + /* Discard reg address from values count. */ + if (!count) + return -EINVAL; + count--; + + memset(&data, 0, sizeof(data)); + data.block[0] = count; + memcpy(&data.block[1], (u8 *)val_buf + 1, count); + + __i2c_smbus_xfer(client->adapter, client->addr, + sunrise->ignore_nak ? I2C_M_IGNORE_NAK : 0, + I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE_DATA, &data); + + usleep_range(500, 1500); + + return __i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, ((u8 *)val_buf)[0], + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} + +/* + * Sunrise i2c read/write operations: lock the i2c segment to avoid losing the + * wake up session. Use custom regmap operations that perform unlocked access to + * the i2c bus. + */ +static int sunrise_read_byte(struct sunrise_dev *sunrise, u8 reg) +{ + const struct i2c_client *client = sunrise->client; + const struct device *dev = &client->dev; + unsigned int val; + int ret; + + i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT); + ret = regmap_read(sunrise->regmap, reg, &val); + i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT); + if (ret) { + dev_err(dev, "Read byte failed: reg 0x%02x (%d)\n", reg, ret); + return ret; + } + + return val; +} + +static int sunrise_read_word(struct sunrise_dev *sunrise, u8 reg, u16 *val) +{ + const struct i2c_client *client = sunrise->client; + const struct device *dev = &client->dev; + __be16 be_val; + int ret; + + i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT); + ret = regmap_bulk_read(sunrise->regmap, reg, &be_val, sizeof(be_val)); + i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT); + if (ret) { + dev_err(dev, "Read word failed: reg 0x%02x (%d)\n", reg, ret); + return ret; + } + + *val = be16_to_cpu(be_val); + + return 0; +} + +static int sunrise_write_byte(struct sunrise_dev *sunrise, u8 reg, u8 val) +{ + const struct i2c_client *client = sunrise->client; + const struct device *dev = &client->dev; + int ret; + + i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT); + ret = regmap_write(sunrise->regmap, reg, val); + i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT); + if (ret) + dev_err(dev, "Write byte failed: reg 0x%02x (%d)\n", reg, ret); + + return ret; +} + +static int sunrise_write_word(struct sunrise_dev *sunrise, u8 reg, u16 data) +{ + const struct i2c_client *client = sunrise->client; + const struct device *dev = &client->dev; + __be16 be_data = cpu_to_be16(data); + int ret; + + i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT); + ret = regmap_bulk_write(sunrise->regmap, reg, &be_data, sizeof(be_data)); + i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT); + if (ret) + dev_err(dev, "Write word failed: reg 0x%02x (%d)\n", reg, ret); + + return ret; +} + +/* Trigger a calibration cycle. */ + +enum { + SUNRISE_CALIBRATION_FACTORY, + SUNRISE_CALIBRATION_BACKGROUND, +}; + +static const struct sunrise_calib_data { + u16 cmd; + u8 bit; + const char * const name; +} calib_data[] = { + [SUNRISE_CALIBRATION_FACTORY] = { + SUNRISE_CALIBRATION_FACTORY_CMD, + BIT(2), + "factory_calibration", + }, + [SUNRISE_CALIBRATION_BACKGROUND] = { + SUNRISE_CALIBRATION_BACKGROUND_CMD, + BIT(5), + "background_calibration", + }, +}; + +static int sunrise_calibrate(struct sunrise_dev *sunrise, + const struct sunrise_calib_data *data) +{ + unsigned int status; + int ret; + + /* Reset the calibration status reg. */ + ret = sunrise_write_byte(sunrise, SUNRISE_CALIBRATION_STATUS_REG, 0x00); + if (ret) + return ret; + + /* Write a calibration command and poll the calibration status bit. */ + ret = sunrise_write_word(sunrise, SUNRISE_CALIBRATION_COMMAND_REG, data->cmd); + if (ret) + return ret; + + dev_dbg(&sunrise->client->dev, "%s in progress\n", data->name); + + /* + * Calibration takes several seconds, so the sleep time between reads + * can be pretty relaxed. + */ + return read_poll_timeout(sunrise_read_byte, status, status & data->bit, + 200000, SUNRISE_CALIBRATION_TIMEOUT_US, false, + sunrise, SUNRISE_CALIBRATION_STATUS_REG); +} + +static ssize_t sunrise_cal_factory_write(struct iio_dev *iiodev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct sunrise_dev *sunrise = iio_priv(iiodev); + bool enable; + int ret; + + ret = kstrtobool(buf, &enable); + if (ret) + return ret; + + if (!enable) + return len; + + mutex_lock(&sunrise->lock); + ret = sunrise_calibrate(sunrise, &calib_data[SUNRISE_CALIBRATION_FACTORY]); + mutex_unlock(&sunrise->lock); + if (ret) + return ret; + + return len; +} + +static ssize_t sunrise_cal_background_write(struct iio_dev *iiodev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct sunrise_dev *sunrise = iio_priv(iiodev); + bool enable; + int ret; + + ret = kstrtobool(buf, &enable); + if (ret) + return ret; + + if (!enable) + return len; + + mutex_lock(&sunrise->lock); + ret = sunrise_calibrate(sunrise, &calib_data[SUNRISE_CALIBRATION_BACKGROUND]); + mutex_unlock(&sunrise->lock); + if (ret) + return ret; + + return len; +} + + /* Enumerate and retrieve the chip error status. */ +enum { + SUNRISE_ERROR_FATAL, + SUNRISE_ERROR_I2C, + SUNRISE_ERROR_ALGORITHM, + SUNRISE_ERROR_CALIBRATION, + SUNRISE_ERROR_SELF_DIAGNOSTIC, + SUNRISE_ERROR_OUT_OF_RANGE, + SUNRISE_ERROR_MEMORY, + SUNRISE_ERROR_NO_MEASUREMENT, + SUNRISE_ERROR_LOW_VOLTAGE, + SUNRISE_ERROR_MEASUREMENT_TIMEOUT, +}; + +static const char * const sunrise_error_statuses[] = { + [SUNRISE_ERROR_FATAL] = "error_fatal", + [SUNRISE_ERROR_I2C] = "error_i2c", + [SUNRISE_ERROR_ALGORITHM] = "error_algorithm", + [SUNRISE_ERROR_CALIBRATION] = "error_calibration", + [SUNRISE_ERROR_SELF_DIAGNOSTIC] = "error_self_diagnostic", + [SUNRISE_ERROR_OUT_OF_RANGE] = "error_out_of_range", + [SUNRISE_ERROR_MEMORY] = "error_memory", + [SUNRISE_ERROR_NO_MEASUREMENT] = "error_no_measurement", + [SUNRISE_ERROR_LOW_VOLTAGE] = "error_low_voltage", + [SUNRISE_ERROR_MEASUREMENT_TIMEOUT] = "error_measurement_timeout", +}; + +static const struct iio_enum sunrise_error_statuses_enum = { + .items = sunrise_error_statuses, + .num_items = ARRAY_SIZE(sunrise_error_statuses), +}; + +static ssize_t sunrise_error_status_read(struct iio_dev *iiodev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct sunrise_dev *sunrise = iio_priv(iiodev); + unsigned long errors; + ssize_t len = 0; + u16 value; + int ret; + u8 i; + + mutex_lock(&sunrise->lock); + ret = sunrise_read_word(sunrise, SUNRISE_ERROR_STATUS_REG, &value); + if (ret) { + mutex_unlock(&sunrise->lock); + return ret; + } + + errors = value; + for_each_set_bit(i, &errors, ARRAY_SIZE(sunrise_error_statuses)) + len += sysfs_emit_at(buf, len, "%s ", sunrise_error_statuses[i]); + + if (len) + buf[len - 1] = '\n'; + + mutex_unlock(&sunrise->lock); + + return len; +} + +static const struct iio_chan_spec_ext_info sunrise_concentration_ext_info[] = { + /* Calibration triggers. */ + { + .name = "calibration_factory", + .write = sunrise_cal_factory_write, + .shared = IIO_SEPARATE, + }, + { + .name = "calibration_background", + .write = sunrise_cal_background_write, + .shared = IIO_SEPARATE, + }, + + /* Error statuses. */ + { + .name = "error_status", + .read = sunrise_error_status_read, + .shared = IIO_SHARED_BY_ALL, + }, + { + .name = "error_status_available", + .shared = IIO_SHARED_BY_ALL, + .read = iio_enum_available_read, + .private = (uintptr_t)&sunrise_error_statuses_enum, + }, + {} +}; + +static const struct iio_chan_spec sunrise_channels[] = { + { + .type = IIO_CONCENTRATION, + .modified = 1, + .channel2 = IIO_MOD_CO2, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .ext_info = sunrise_concentration_ext_info, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static int sunrise_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct sunrise_dev *sunrise = iio_priv(iio_dev); + u16 value; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_CONCENTRATION: + mutex_lock(&sunrise->lock); + ret = sunrise_read_word(sunrise, SUNRISE_CO2_FILTERED_COMP_REG, + &value); + mutex_unlock(&sunrise->lock); + + if (ret) + return ret; + + *val = value; + return IIO_VAL_INT; + + case IIO_TEMP: + mutex_lock(&sunrise->lock); + ret = sunrise_read_word(sunrise, SUNRISE_CHIP_TEMPERATURE_REG, + &value); + mutex_unlock(&sunrise->lock); + + if (ret) + return ret; + + *val = value; + return IIO_VAL_INT; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_CONCENTRATION: + /* + * 1 / 10^4 to comply with IIO scale for CO2 + * (percentage). The chip CO2 reading range is [400 - + * 5000] ppm which corresponds to [0,004 - 0,5] %. + */ + *val = 1; + *val2 = 10000; + return IIO_VAL_FRACTIONAL; + + case IIO_TEMP: + /* x10 to comply with IIO scale (millidegrees celsius). */ + *val = 10; + return IIO_VAL_INT; + + default: + return -EINVAL; + } + + default: + return -EINVAL; + } +} + +static const struct iio_info sunrise_info = { + .read_raw = sunrise_read_raw, +}; + +static const struct regmap_bus sunrise_regmap_bus = { + .read = sunrise_regmap_read, + .write = sunrise_regmap_write, +}; + +static const struct regmap_config sunrise_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int sunrise_probe(struct i2c_client *client) +{ + struct sunrise_dev *sunrise; + struct iio_dev *iio_dev; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA)) { + dev_err(&client->dev, + "Adapter does not support required functionalities\n"); + return -EOPNOTSUPP; + } + + iio_dev = devm_iio_device_alloc(&client->dev, sizeof(*sunrise)); + if (!iio_dev) + return -ENOMEM; + + sunrise = iio_priv(iio_dev); + sunrise->client = client; + mutex_init(&sunrise->lock); + + i2c_set_clientdata(client, sunrise); + + sunrise->regmap = devm_regmap_init(&client->dev, &sunrise_regmap_bus, + client, &sunrise_regmap_config); + if (IS_ERR(sunrise->regmap)) { + dev_err(&client->dev, "Failed to initialize regmap\n"); + return PTR_ERR(sunrise->regmap); + } + + /* + * The chip nacks the wake up message. If the adapter does not support + * protocol mangling do not set the I2C_M_IGNORE_NAK flag at the expense + * of possible cruft in the logs. + */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_PROTOCOL_MANGLING)) + sunrise->ignore_nak = true; + + iio_dev->info = &sunrise_info; + iio_dev->name = DRIVER_NAME; + iio_dev->channels = sunrise_channels; + iio_dev->num_channels = ARRAY_SIZE(sunrise_channels); + iio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&client->dev, iio_dev); +} + +static const struct of_device_id sunrise_of_match[] = { + { .compatible = "senseair,sunrise-006-0-0007" }, + {} +}; +MODULE_DEVICE_TABLE(of, sunrise_of_match); + +static struct i2c_driver sunrise_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = sunrise_of_match, + }, + .probe_new = sunrise_probe, +}; +module_i2c_driver(sunrise_driver); + +MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>"); +MODULE_DESCRIPTION("Senseair Sunrise 006-0-0007 CO2 sensor IIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c new file mode 100644 index 000000000..e7e1c74a3 --- /dev/null +++ b/drivers/iio/chemical/vz89x.c @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vz89x.c - Support for SGX Sensortech MiCS VZ89X VOC sensors + * + * Copyright (C) 2015-2018 + * Author: Matt Ranostay <matt.ranostay@konsulko.com> + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VZ89X_REG_MEASUREMENT 0x09 +#define VZ89X_REG_MEASUREMENT_RD_SIZE 6 +#define VZ89X_REG_MEASUREMENT_WR_SIZE 3 + +#define VZ89X_VOC_CO2_IDX 0 +#define VZ89X_VOC_SHORT_IDX 1 +#define VZ89X_VOC_TVOC_IDX 2 +#define VZ89X_VOC_RESISTANCE_IDX 3 + +#define VZ89TE_REG_MEASUREMENT 0x0c +#define VZ89TE_REG_MEASUREMENT_RD_SIZE 7 +#define VZ89TE_REG_MEASUREMENT_WR_SIZE 6 + +#define VZ89TE_VOC_TVOC_IDX 0 +#define VZ89TE_VOC_CO2_IDX 1 +#define VZ89TE_VOC_RESISTANCE_IDX 2 + +enum { + VZ89X, + VZ89TE, +}; + +struct vz89x_chip_data; + +struct vz89x_data { + struct i2c_client *client; + const struct vz89x_chip_data *chip; + struct mutex lock; + int (*xfer)(struct vz89x_data *data, u8 cmd); + + bool is_valid; + unsigned long last_update; + u8 buffer[VZ89TE_REG_MEASUREMENT_RD_SIZE]; +}; + +struct vz89x_chip_data { + bool (*valid)(struct vz89x_data *data); + const struct iio_chan_spec *channels; + u8 num_channels; + + u8 cmd; + u8 read_size; + u8 write_size; +}; + +static const struct iio_chan_spec vz89x_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), + .address = VZ89X_VOC_CO2_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = VZ89X_VOC_SHORT_IDX, + .extend_name = "short", + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), + .address = VZ89X_VOC_TVOC_IDX, + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .address = VZ89X_VOC_RESISTANCE_IDX, + .scan_index = -1, + .scan_type = { + .endianness = IIO_LE, + }, + }, +}; + +static const struct iio_chan_spec vz89te_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), + .address = VZ89TE_VOC_TVOC_IDX, + }, + + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), + .address = VZ89TE_VOC_CO2_IDX, + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .address = VZ89TE_VOC_RESISTANCE_IDX, + .scan_index = -1, + .scan_type = { + .endianness = IIO_BE, + }, + }, +}; + +static IIO_CONST_ATTR(in_concentration_co2_scale, "0.00000698689"); +static IIO_CONST_ATTR(in_concentration_voc_scale, "0.00000000436681223"); + +static struct attribute *vz89x_attributes[] = { + &iio_const_attr_in_concentration_co2_scale.dev_attr.attr, + &iio_const_attr_in_concentration_voc_scale.dev_attr.attr, + NULL, +}; + +static const struct attribute_group vz89x_attrs_group = { + .attrs = vz89x_attributes, +}; + +/* + * Chipset sometime updates in the middle of a reading causing it to reset the + * data pointer, and causing invalid reading of previous data. + * We can check for this by reading MSB of the resistance reading that is + * always zero, and by also confirming the VOC_short isn't zero. + */ + +static bool vz89x_measurement_is_valid(struct vz89x_data *data) +{ + if (data->buffer[VZ89X_VOC_SHORT_IDX] == 0) + return true; + + return !!(data->buffer[data->chip->read_size - 1] > 0); +} + +/* VZ89TE device has a modified CRC-8 two complement check */ +static bool vz89te_measurement_is_valid(struct vz89x_data *data) +{ + u8 crc = 0; + int i, sum = 0; + + for (i = 0; i < (data->chip->read_size - 1); i++) { + sum = crc + data->buffer[i]; + crc = sum; + crc += sum / 256; + } + + return !((0xff - crc) == data->buffer[data->chip->read_size - 1]); +} + +static int vz89x_i2c_xfer(struct vz89x_data *data, u8 cmd) +{ + const struct vz89x_chip_data *chip = data->chip; + struct i2c_client *client = data->client; + struct i2c_msg msg[2]; + int ret; + u8 buf[6] = { cmd, 0, 0, 0, 0, 0xf3 }; + + msg[0].addr = client->addr; + msg[0].flags = client->flags; + msg[0].len = chip->write_size; + msg[0].buf = (char *) &buf; + + msg[1].addr = client->addr; + msg[1].flags = client->flags | I2C_M_RD; + msg[1].len = chip->read_size; + msg[1].buf = (char *) &data->buffer; + + ret = i2c_transfer(client->adapter, msg, 2); + + return (ret == 2) ? 0 : ret; +} + +static int vz89x_smbus_xfer(struct vz89x_data *data, u8 cmd) +{ + struct i2c_client *client = data->client; + int ret; + int i; + + ret = i2c_smbus_write_word_data(client, cmd, 0); + if (ret < 0) + return ret; + + for (i = 0; i < data->chip->read_size; i++) { + ret = i2c_smbus_read_byte(client); + if (ret < 0) + return ret; + data->buffer[i] = ret; + } + + return 0; +} + +static int vz89x_get_measurement(struct vz89x_data *data) +{ + const struct vz89x_chip_data *chip = data->chip; + int ret; + + /* sensor can only be polled once a second max per datasheet */ + if (!time_after(jiffies, data->last_update + HZ)) + return data->is_valid ? 0 : -EAGAIN; + + data->is_valid = false; + data->last_update = jiffies; + + ret = data->xfer(data, chip->cmd); + if (ret < 0) + return ret; + + ret = chip->valid(data); + if (ret) + return -EAGAIN; + + data->is_valid = true; + + return 0; +} + +static int vz89x_get_resistance_reading(struct vz89x_data *data, + struct iio_chan_spec const *chan, + int *val) +{ + u8 *tmp = &data->buffer[chan->address]; + + switch (chan->scan_type.endianness) { + case IIO_LE: + *val = le32_to_cpup((__le32 *) tmp) & GENMASK(23, 0); + break; + case IIO_BE: + *val = be32_to_cpup((__be32 *) tmp) >> 8; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vz89x_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct vz89x_data *data = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->lock); + ret = vz89x_get_measurement(data); + mutex_unlock(&data->lock); + + if (ret) + return ret; + + switch (chan->type) { + case IIO_CONCENTRATION: + *val = data->buffer[chan->address]; + return IIO_VAL_INT; + case IIO_RESISTANCE: + ret = vz89x_get_resistance_reading(data, chan, val); + if (!ret) + return IIO_VAL_INT; + break; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_RESISTANCE: + *val = 10; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + switch (chan->channel2) { + case IIO_MOD_CO2: + *val = 44; + *val2 = 250000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_MOD_VOC: + *val = -13; + return IIO_VAL_INT; + default: + return -EINVAL; + } + } + + return ret; +} + +static const struct iio_info vz89x_info = { + .attrs = &vz89x_attrs_group, + .read_raw = vz89x_read_raw, +}; + +static const struct vz89x_chip_data vz89x_chips[] = { + { + .valid = vz89x_measurement_is_valid, + + .cmd = VZ89X_REG_MEASUREMENT, + .read_size = VZ89X_REG_MEASUREMENT_RD_SIZE, + .write_size = VZ89X_REG_MEASUREMENT_WR_SIZE, + + .channels = vz89x_channels, + .num_channels = ARRAY_SIZE(vz89x_channels), + }, + { + .valid = vz89te_measurement_is_valid, + + .cmd = VZ89TE_REG_MEASUREMENT, + .read_size = VZ89TE_REG_MEASUREMENT_RD_SIZE, + .write_size = VZ89TE_REG_MEASUREMENT_WR_SIZE, + + .channels = vz89te_channels, + .num_channels = ARRAY_SIZE(vz89te_channels), + }, +}; + +static const struct of_device_id vz89x_dt_ids[] = { + { .compatible = "sgx,vz89x", .data = (void *) VZ89X }, + { .compatible = "sgx,vz89te", .data = (void *) VZ89TE }, + { } +}; +MODULE_DEVICE_TABLE(of, vz89x_dt_ids); + +static int vz89x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct vz89x_data *data; + int chip_id; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + data->xfer = vz89x_i2c_xfer; + else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) + data->xfer = vz89x_smbus_xfer; + else + return -EOPNOTSUPP; + + if (!dev_fwnode(dev)) + chip_id = id->driver_data; + else + chip_id = (unsigned long)device_get_match_data(dev); + + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->chip = &vz89x_chips[chip_id]; + data->last_update = jiffies - HZ; + mutex_init(&data->lock); + + indio_dev->info = &vz89x_info; + indio_dev->name = dev_name(dev); + indio_dev->modes = INDIO_DIRECT_MODE; + + indio_dev->channels = data->chip->channels; + indio_dev->num_channels = data->chip->num_channels; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct i2c_device_id vz89x_id[] = { + { "vz89x", VZ89X }, + { "vz89te", VZ89TE }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vz89x_id); + +static struct i2c_driver vz89x_driver = { + .driver = { + .name = "vz89x", + .of_match_table = vz89x_dt_ids, + }, + .probe = vz89x_probe, + .id_table = vz89x_id, +}; +module_i2c_driver(vz89x_driver); + +MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); +MODULE_DESCRIPTION("SGX Sensortech MiCS VZ89X VOC sensors"); +MODULE_LICENSE("GPL v2"); |