diff options
Diffstat (limited to 'drivers/input/joystick/Kconfig')
| -rw-r--r-- | drivers/input/joystick/Kconfig | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig new file mode 100644 index 000000000..04ca3d1c2 --- /dev/null +++ b/drivers/input/joystick/Kconfig @@ -0,0 +1,415 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Joystick driver configuration +# +menuconfig INPUT_JOYSTICK + bool "Joysticks/Gamepads" + depends on !UML + help + If you have a joystick, 6dof controller, gamepad, steering wheel, + weapon control system or something like that you can say Y here + and the list of supported devices will be displayed. This option + doesn't affect the kernel. + + Please read the file <file:Documentation/input/joydev/joystick.rst> which + contains more information. + +if INPUT_JOYSTICK + +config JOYSTICK_ANALOG + tristate "Classic PC analog joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have a joystick that connects to the PC + gameport. In addition to the usual PC analog joystick, this driver + supports many extensions, including joysticks with throttle control, + with rudders, additional hats and buttons compatible with CH + Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or + Saitek Cyborg joysticks. + + Please read the file <file:Documentation/input/joydev/joystick.rst> which + contains more information. + + To compile this driver as a module, choose M here: the + module will be called analog. + +config JOYSTICK_A3D + tristate "Assassin 3D and MadCatz Panther devices" + select GAMEPORT + help + Say Y here if you have an FPGaming or MadCatz controller using the + A3D protocol over the PC gameport. + + To compile this driver as a module, choose M here: the + module will be called a3d. + +config JOYSTICK_ADC + tristate "Simple joystick connected over ADC" + depends on IIO + select IIO_BUFFER + select IIO_BUFFER_CB + help + Say Y here if you have a simple joystick connected over ADC. + + To compile this driver as a module, choose M here: the + module will be called adc-joystick. + +config JOYSTICK_ADI + tristate "Logitech ADI digital joysticks and gamepads" + select GAMEPORT + depends on ADI!=m # avoid module name conflict + help + Say Y here if you have a Logitech controller using the ADI + protocol over the PC gameport. + + To compile this driver as a module, choose M here: the + module will be called adi. + +config JOYSTICK_COBRA + tristate "Creative Labs Blaster Cobra gamepad" + select GAMEPORT + help + Say Y here if you have a Creative Labs Blaster Cobra gamepad. + + To compile this driver as a module, choose M here: the + module will be called cobra. + +config JOYSTICK_GF2K + tristate "Genius Flight2000 Digital joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have a Genius Flight2000 or MaxFighter digitally + communicating joystick or gamepad. + + To compile this driver as a module, choose M here: the + module will be called gf2k. + +config JOYSTICK_GRIP + tristate "Gravis GrIP joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have a Gravis controller using the GrIP protocol + over the PC gameport. + + To compile this driver as a module, choose M here: the + module will be called grip. + +config JOYSTICK_GRIP_MP + tristate "Gravis GrIP MultiPort" + select GAMEPORT + help + Say Y here if you have the original Gravis GrIP MultiPort, a hub + that connects to the gameport and you connect gamepads to it. + + To compile this driver as a module, choose M here: the + module will be called grip_mp. + +config JOYSTICK_GUILLEMOT + tristate "Guillemot joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have a Guillemot joystick using a digital + protocol over the PC gameport. + + To compile this driver as a module, choose M here: the + module will be called guillemot. + +config JOYSTICK_INTERACT + tristate "InterAct digital joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have an InterAct gameport or joystick + communicating digitally over the gameport. + + To compile this driver as a module, choose M here: the + module will be called interact. + +config JOYSTICK_SIDEWINDER + tristate "Microsoft SideWinder digital joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have a Microsoft controller using the Digital + Overdrive protocol over PC gameport. + + To compile this driver as a module, choose M here: the + module will be called sidewinder. + +config JOYSTICK_TMDC + tristate "ThrustMaster DirectConnect joysticks and gamepads" + select GAMEPORT + help + Say Y here if you have a ThrustMaster controller using the + DirectConnect (BSP) protocol over the PC gameport. + + To compile this driver as a module, choose M here: the + module will be called tmdc. + +source "drivers/input/joystick/iforce/Kconfig" + +config JOYSTICK_WARRIOR + tristate "Logitech WingMan Warrior joystick" + select SERIO + help + Say Y here if you have a Logitech WingMan Warrior joystick connected + to your computer's serial port. + + To compile this driver as a module, choose M here: the + module will be called warrior. + +config JOYSTICK_MAGELLAN + tristate "LogiCad3d Magellan/SpaceMouse 6dof controllers" + select SERIO + help + Say Y here if you have a Magellan or Space Mouse 6DOF controller + connected to your computer's serial port. + + To compile this driver as a module, choose M here: the + module will be called magellan. + +config JOYSTICK_SPACEORB + tristate "SpaceTec SpaceOrb/Avenger 6dof controllers" + select SERIO + help + Say Y here if you have a SpaceOrb 360 or SpaceBall Avenger 6DOF + controller connected to your computer's serial port. + + To compile this driver as a module, choose M here: the + module will be called spaceorb. + +config JOYSTICK_SPACEBALL + tristate "SpaceTec SpaceBall 6dof controllers" + select SERIO + help + Say Y here if you have a SpaceTec SpaceBall 2003/3003/4000 FLX + controller connected to your computer's serial port. For the + SpaceBall 4000 USB model, use the USB HID driver. + + To compile this driver as a module, choose M here: the + module will be called spaceball. + +config JOYSTICK_STINGER + tristate "Gravis Stinger gamepad" + select SERIO + help + Say Y here if you have a Gravis Stinger connected to one of your + serial ports. + + To compile this driver as a module, choose M here: the + module will be called stinger. + +config JOYSTICK_TWIDJOY + tristate "Twiddler as a joystick" + select SERIO + help + Say Y here if you have a Handykey Twiddler connected to your + computer's serial port and want to use it as a joystick. + + To compile this driver as a module, choose M here: the + module will be called twidjoy. + +config JOYSTICK_ZHENHUA + tristate "5-byte Zhenhua RC transmitter" + select SERIO + select BITREVERSE + help + Say Y here if you have a Zhen Hua PPM-4CH transmitter which is + supplied with a ready to fly micro electric indoor helicopters + such as EasyCopter, Lama, MiniCopter, DragonFly or Jabo and want + to use it via serial cable as a joystick. + + To compile this driver as a module, choose M here: the + module will be called zhenhua. + +config JOYSTICK_DB9 + tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" + depends on PARPORT + help + Say Y here if you have a Sega Master System gamepad, Sega Genesis + gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, + Commodore, Amstrad CPC joystick connected to your parallel port. + For more information on how to use the driver please read + <file:Documentation/input/devices/joystick-parport.rst>. + + To compile this driver as a module, choose M here: the + module will be called db9. + +config JOYSTICK_GAMECON + tristate "Multisystem, NES, SNES, N64, PSX joysticks and gamepads" + depends on PARPORT + select INPUT_FF_MEMLESS + help + Say Y here if you have a Nintendo Entertainment System gamepad, + Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad, + Sony PlayStation gamepad or a Multisystem -- Atari, Amiga, + Commodore, Amstrad CPC joystick connected to your parallel port. + For more information on how to use the driver please read + <file:Documentation/input/devices/joystick-parport.rst>. + + To compile this driver as a module, choose M here: the + module will be called gamecon. + +config JOYSTICK_TURBOGRAFX + tristate "Multisystem joysticks via TurboGraFX device" + depends on PARPORT + help + Say Y here if you have the TurboGraFX interface by Steffen Schwenke, + and want to use it with Multisystem -- Atari, Amiga, Commodore, + Amstrad CPC joystick. For more information on how to use the driver + please read <file:Documentation/input/devices/joystick-parport.rst>. + + To compile this driver as a module, choose M here: the + module will be called turbografx. + +config JOYSTICK_AMIGA + tristate "Amiga joysticks" + depends on AMIGA + help + Say Y here if you have an Amiga with a digital joystick connected + to it. + + To compile this driver as a module, choose M here: the + module will be called amijoy. + +config JOYSTICK_AS5011 + tristate "Austria Microsystem AS5011 joystick" + depends on I2C + help + Say Y here if you have an AS5011 digital joystick connected to your + system. + + To compile this driver as a module, choose M here: the + module will be called as5011. + +config JOYSTICK_JOYDUMP + tristate "Gameport data dumper" + select GAMEPORT + help + Say Y here if you want to dump data from your joystick into the system + log for debugging purposes. Say N if you are making a production + configuration or aren't sure. + + To compile this driver as a module, choose M here: the + module will be called joydump. + +config JOYSTICK_XPAD + tristate "X-Box gamepad support" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use the X-Box pad with your computer. + Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) + and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. + + For information about how to connect the X-Box pad to USB, see + <file:Documentation/input/devices/xpad.rst>. + + To compile this driver as a module, choose M here: the + module will be called xpad. + +config JOYSTICK_XPAD_FF + bool "X-Box gamepad rumble support" + depends on JOYSTICK_XPAD && INPUT + select INPUT_FF_MEMLESS + help + Say Y here if you want to take advantage of xbox 360 rumble features. + +config JOYSTICK_XPAD_LEDS + bool "LED Support for Xbox360 controller 'BigX' LED" + depends on JOYSTICK_XPAD && (LEDS_CLASS=y || LEDS_CLASS=JOYSTICK_XPAD) + help + This option enables support for the LED which surrounds the Big X on + XBox 360 controller. + +config JOYSTICK_WALKERA0701 + tristate "Walkera WK-0701 RC transmitter" + depends on HIGH_RES_TIMERS && PARPORT + help + Say Y or M here if you have a Walkera WK-0701 transmitter which is + supplied with a ready to fly Walkera helicopters such as HM36, + HM37, HM60 and want to use it via parport as a joystick. More + information is available: <file:Documentation/input/devices/walkera0701.rst> + + To compile this driver as a module, choose M here: the + module will be called walkera0701. + +config JOYSTICK_MAPLE + tristate "Dreamcast control pad" + depends on MAPLE + help + Say Y here if you have a SEGA Dreamcast and want to use your + controller as a joystick. + + Most Dreamcast users will say Y. + + To compile this as a module choose M here: the module will be called + maplecontrol. + +config JOYSTICK_PSXPAD_SPI + tristate "PlayStation 1/2 joypads via SPI interface" + depends on SPI + help + Say Y here if you wish to connect PlayStation 1/2 joypads + via SPI interface. + + To compile this driver as a module, choose M here: the + module will be called psxpad-spi. + +config JOYSTICK_PSXPAD_SPI_FF + bool "PlayStation 1/2 joypads force feedback (rumble) support" + depends on JOYSTICK_PSXPAD_SPI + select INPUT_FF_MEMLESS + help + Say Y here if you want to take advantage of PlayStation 1/2 + joypads rumble features. + + To drive rumble motor a dedicated power supply is required. + +config JOYSTICK_PXRC + tristate "PhoenixRC Flight Controller Adapter" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use the PhoenixRC Flight Controller Adapter. + + To compile this driver as a module, choose M here: the + module will be called pxrc. + +config JOYSTICK_QWIIC + tristate "SparkFun Qwiic Joystick" + depends on I2C + help + Say Y here if you want to use the SparkFun Qwiic Joystick. + + To compile this driver as a module, choose M here: the + module will be called qwiic-joystick. + +config JOYSTICK_FSIA6B + tristate "FlySky FS-iA6B RC Receiver" + select SERIO + help + Say Y here if you use a FlySky FS-i6 RC remote control along with the + FS-iA6B RC receiver as a joystick input device. + + To compile this driver as a module, choose M here: the + module will be called fsia6b. + +config JOYSTICK_N64 + bool "N64 controller" + depends on MACH_NINTENDO64 + help + Say Y here if you want enable support for the four + built-in controller ports on the Nintendo 64 console. + +config JOYSTICK_SENSEHAT + tristate "Raspberry Pi Sense HAT joystick" + depends on INPUT && I2C + depends on HAS_IOMEM + select MFD_SIMPLE_MFD_I2C + help + Say Y here if you want to enable the driver for the + the Raspberry Pi Sense HAT. + + To compile this driver as a module, choose M here: the + module will be called sensehat_joystick. + +endif |